Драйвера на сканер установил, но он всё равно не виден.
Нашел множество инструкций в гугле, но всё останавлвиается на шаге, где надо узнать код устройства. Проблема в том, что сканер просто не находится.
Код: Выделить всё
iron_cam@ubuntu:~$ sudo sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
found SCSI processor "Marvell 91xx Config 1.01" at /dev/sg5
# Your SCSI scanner was detected. It may or may not be supported by SANE. Try
# scanimage -L and read the backend's manpage.
could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
# No USB scanners found. If you expected something different, make sure that
# you have loaded a kernel driver for your USB host controller and have setup
# the USB system correctly. See man sane-usb for details.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.