Нужна помощь по nginx (не получается настроить редирект)

Knoppix

Модераторы: Warderer, Модераторы разделов

Ответить
cubespace
Сообщения: 20

Нужна помощь по nginx

Сообщение cubespace »

Доброго времени суток.
Есть небольшая проблема, пока что не получается ее решить.
VPS Debian 9
Если зайти по адресу http://sait.com/engine/index.php то сайт откроется.
А если по http://sait.com то будет 403 Forbidden.

Вот конфиг:

Код: Выделить всё

server {
        server_name sait.com www.sait.com;
        charset off;
        index index.html index.php;
        disable_symlinks if_not_owner from=$root_path;
        include /etc/nginx/vhosts-includes/*.conf;
        include /etc/nginx/vhosts-resources/sait.com/*.conf;
        access_log /var/www/httpd-logs/sait.com.access.log;
        error_log /var/www/httpd-logs/sait.com.error.log notice;
        ssi on;
        set $root_path /var/www/site/data/www/sait.com;
        root $root_path;
        listen 151.151.151.151:80;

        location / {
                location ~ [^/]\.ph(p\d*|tml)$ {
                        try_files /does_not_exists @php;
                }
        }



        location @php {
                fastcgi_param PHP_ADMIN_VALUE "sendmail_path = /usr/sbin/sendmail -t -i -f webmaster@sait.com";
                fastcgi_param SCRIPT_FILENAME /var/www/site/data/www/sait.com/engine/index.php;
                fastcgi_param HTTPS $http_x_forwarded_https if_not_empty;
                fastcgi_pass unix:/var/www/php-fpm/site.sock;
                try_files $uri =404;
                include /etc/nginx/fastcgi_params;
        }
}


И мне дали старые настройки на которых этот сайт работать но под другим доменом, а так как домен сменился то и перенести нужно на другой серв:

Код: Выделить всё

 server {
 listen 192.192.192.192:80;
 server_name www.mysite.net;
 root /home/www/mysite.net/static.www/;
 error_log /var/log/nginx/mysite.net-error.log warn;
 access_log /var/log/nginx/mysite.net-access.log detailed;

 location / {
 error_page 404 = @php;

 location ~ \. {
 expires 24h;
 }
 return 404;
 }

 location @php {
 include /etc/nginx/fastcgi_params;
 fastcgi_param SCRIPT_FILENAME /home/www/mysite.net/engine/index.php;
 fastcgi_param HTTPS $http_x_forwarded_https if_not_empty;
 fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock;
 }
 }

 server {
 listen 192.192.192.192:80;
 server_name mysite.net;
 root /home/www/mysite.net/static/;
 error_log /var/log/nginx/mysite.net-error.log warn;
 access_log /var/log/nginx/mysite.net-access.log detailed;

 location = / {
 return 301 https://www.mysite.net/;
 }

 location /
 {
 add_header Cache-control public;
 add_header Access-Control-Allow-Origin https://www.mysite.net;
  expires 24h;
  error_page 404 = @php;
  log_not_found off; }

 location @php {
 include /etc/nginx/fastcgi_params;
 fastcgi_param SCRIPT_FILENAME /home/www/mysite.net/engine/static.php;
 fastcgi_param HTTPS $http_x_forwarded_https if_not_empty;
 fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock;
 }
 }

На старом mysite.net был SSL на новом не используют.
Я вот пробовал менять настройки, но так не не получилось запустить на главном новом домене.
Чтобы сайт открывался при sait.com. и если пробовать открыть через sait.com/engine/index.php то чтобы кидало на главную страницу sait.com.
Спасибо сказали:
Аватара пользователя
Bizdelnick
Модератор
Сообщения: 20752
Статус: nulla salus bello
ОС: Debian GNU/Linux

Re: Нужна помощь по nginx

Сообщение Bizdelnick »

Показывайте конфиг php-fpm.
Пишите правильно:
в консоли
вку́пе (с чем-либо)
в общем
вообще
в течение (часа)
новичок
нюанс
по умолчанию
приемлемо
проблема
пробовать
трафик
Спасибо сказали:
cubespace
Сообщения: 20

Re: Нужна помощь по nginx

Сообщение cubespace »

php-fpm.conf

Код: Выделить всё

;;;;;;;;;;;;;;;;;;;;;
; FPM Configuration ;
;;;;;;;;;;;;;;;;;;;;;

; All relative paths in this configuration file are relative to PHP's install
; prefix (/usr). This prefix can be dynamically changed by using the
; '-p' argument from the command line.

;;;;;;;;;;;;;;;;;;
; Global Options ;
;;;;;;;;;;;;;;;;;;

[global]
; Pid file
; Note: the default prefix is /var
; Default Value: none
pid = /run/php/php7.0-fpm.pid

; Error log file
; If it's set to "syslog", log is sent to syslogd instead of being written
; in a local file.
; Note: the default prefix is /var
; Default Value: log/php-fpm.log
error_log = /var/log/php7.0-fpm.log

; syslog_facility is used to specify what type of program is logging the
; message. This lets syslogd specify that messages from different facilities
; will be handled differently.
; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON)
; Default Value: daemon
;syslog.facility = daemon

; syslog_ident is prepended to every message. If you have multiple FPM
; instances running on the same server, you can change the default value
; which must suit common needs.
; Default Value: php-fpm
;syslog.ident = php-fpm

; Log level
; Possible Values: alert, error, warning, notice, debug
; Default Value: notice
;log_level = notice

; If this number of child processes exit with SIGSEGV or SIGBUS within the time
; interval set by emergency_restart_interval then FPM will restart. A value
; of '0' means 'Off'.
; Default Value: 0
;emergency_restart_threshold = 0

; Interval of time used by emergency_restart_interval to determine when
; a graceful restart will be initiated.  This can be useful to work around
; accidental corruptions in an accelerator's shared memory.
; Available Units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0

;emergency_restart_interval = 0
; Time limit for child processes to wait for a reaction on signals from master.
; Available units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
;process_control_timeout = 0

; The maximum number of processes FPM will fork. This has been design to control
; the global number of processes when using dynamic PM within a lot of pools.
; Use it with caution.
; Note: A value of 0 indicates no limit
; Default Value: 0
; process.max = 128

; Specify the nice(2) priority to apply to the master process (only if set)
; The value can vary from -19 (highest priority) to 20 (lower priority)
; Note: - It will only work if the FPM master process is launched as root
;       - The pool process will inherit the master process priority
;         unless it specified otherwise
; Default Value: no set
; process.priority = -19

; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
; Default Value: yes
;daemonize = yes

; Set open file descriptor rlimit for the master process.
; Default Value: system defined value
;rlimit_files = 1024

; Specify the event mechanism FPM will use. The following is available:
; - select     (any POSIX os)
; - poll       (any POSIX os)
; - epoll      (linux >= 2.5.44)
; - kqueue     (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0)
; - /dev/poll  (Solaris >= 7)
; - port       (Solaris >= 10)
; Default Value: not set (auto detection)
;events.mechanism = epoll

; When FPM is build with systemd integration, specify the interval,
; in second, between health report notification to systemd.
; Set to 0 to disable.
; Available Units: s(econds), m(inutes), h(ours)
; Default Unit: seconds
; Default value: 10
;systemd_interval = 10

;;;;;;;;;;;;;;;;;;;;
; Pool Definitions ;
;;;;;;;;;;;;;;;;;;;;

; Multiple pools of child processes may be started with different listening
; ports and different management options.  The name of the pool will be
; used in logs and stats. There is no limitation on the number of pools which
; FPM can handle. Your system will tell you anyway :)

; Include one or more files. If glob(3) exists, it is used to include a bunch of
; files from a glob(3) pattern. This directive can be used everywhere in the
; file.
; Relative path can also be used. They will be prefixed by:
;  - the global prefix if it's been set (-p argument)
;  - /usr otherwise
include=/etc/php/7.0/fpm/pool.d/*.conf


/etc/php/7.0/fpm/pool.d/site.conf

Код: Выделить всё

[site]
pm = dynamic
pm.start_servers = 1
pm.min_spare_servers = 1
pm.max_children = 5
pm.max_spare_servers = 5
php_admin_value[display_errors] = stderr
php_admin_value[log_errors] = On
listen = /var/www/php-fpm/site.sock
listen.mode = 0660
listen.owner = site
listen.group = www-data
user = site
group = site
chdir = /
php_admin_value[upload_tmp_dir] = /var/www/site/data/mod-tmp
php_admin_value[session.save_path] = /var/www/site/data/mod-tmp
Спасибо сказали:
Аватара пользователя
Bizdelnick
Модератор
Сообщения: 20752
Статус: nulla salus bello
ОС: Debian GNU/Linux

Re: Нужна помощь по nginx

Сообщение Bizdelnick »

Давно я это дело не настраивал, поэтому могу соврать. Но попробуйте передвинуть
cubespace писал(а):
17.11.2017 20:11

Код: Выделить всё

include /etc/nginx/fastcgi_params;
в начало блока location @php, или по крайней мере выше
cubespace писал(а):
17.11.2017 20:11

Код: Выделить всё

fastcgi_pass unix:/var/www/php-fpm/site.sock;

Пишите правильно:
в консоли
вку́пе (с чем-либо)
в общем
вообще
в течение (часа)
новичок
нюанс
по умолчанию
приемлемо
проблема
пробовать
трафик
Спасибо сказали:
cubespace
Сообщения: 20

Re: Нужна помощь по nginx

Сообщение cubespace »

Bizdelnick писал(а):
17.11.2017 21:41
Давно я это дело не настраивал, поэтому могу соврать. Но попробуйте передвинуть
cubespace писал(а):
17.11.2017 20:11

Код: Выделить всё

include /etc/nginx/fastcgi_params;
в начало блока location @php, или по крайней мере выше
cubespace писал(а):
17.11.2017 20:11

Код: Выделить всё

fastcgi_pass unix:/var/www/php-fpm/site.sock;



Тоже самое( что и было раньше
Спасибо сказали:
Аватара пользователя
ieleja
Сообщения: 307
ОС: Debian 9, macOS, Windows
Контактная информация:

Re: Нужна помощь по nginx

Сообщение ieleja »

а логах не пишет что "403 Forbidden"?
ad infinitum
Спасибо сказали:
Аватара пользователя
Bizdelnick
Модератор
Сообщения: 20752
Статус: nulla salus bello
ОС: Debian GNU/Linux

Re: Нужна помощь по nginx

Сообщение Bizdelnick »

Попробуйте добавить

Код: Выделить всё

fastcgi_param  DOCUMENT_ROOT      /var/www/site/data/www/sait.com/engine
Пишите правильно:
в консоли
вку́пе (с чем-либо)
в общем
вообще
в течение (часа)
новичок
нюанс
по умолчанию
приемлемо
проблема
пробовать
трафик
Спасибо сказали:
cubespace
Сообщения: 20

Re: Нужна помощь по nginx

Сообщение cubespace »

Уже что то есть)
было так

Код: Выделить всё

        ssi on;
        set $root_path /var/www/site/data/www/sait.com;
        root $root_path;


стало так:

Код: Выделить всё

        ssi on;
        set $root_path /var/www/site/data/www/sait.com/engine;
        root $root_path;


было так:

Код: Выделить всё

        location @php {
                fastcgi_param PHP_ADMIN_VALUE "sendmail_path = /usr/sbin/sendmail -t -i -f webmaster@sait.com";
                fastcgi_param SCRIPT_FILENAME /var/www/site/data/www/sait.com/engine/index.php;
                fastcgi_param HTTPS $http_x_forwarded_https if_not_empty;
                fastcgi_pass unix:/var/www/php-fpm/site.sock;
                try_files $uri =404;
                include /etc/nginx/fastcgi_params;


стало так:

Код: Выделить всё

        location @php {
                include /etc/nginx/fastcgi_params;
                fastcgi_pass unix:/var/www/php-fpm/site.sock;
                fastcgi_param PHP_ADMIN_VALUE "sendmail_path = /usr/sbin/sendmail -t -i -f webmaster@sait.com";
                fastcgi_param SCRIPT_FILENAME /var/www/site/data/www/sait.com/engine/index.php;
                fastcgi_param HTTPS $http_x_forwarded_https if_not_empty;
                try_files $uri =404;

Но открывается только головная страница( И нету стилей.
Все ссылается на

Код: Выделить всё

/var/www/site/data/www/sait.com/engine/src/js/ui.js

а должно на:

Код: Выделить всё

/var/www/site/data/www/sait.com/src/js/ui.js

Остальные страницы:

sait.com/page/about
sait.com/contacts

404 Not Found
Спасибо сказали:
Ответить