Необходима помощь (Проблема с сетевими Dlink)

Для новичков как вообще в Linux, так и в конкретной теме, к которой относится вопрос.

Модератор: Bizdelnick

Ответить
tjoma
Сообщения: 108

Необходима помощь

Сообщение tjoma »

Здравствуйте господа.
Прошу Вашей помощи.

У меня возникла следующая проблема, есть машина на которой єсть сетевая карта GbE D-Link DGE-560T и D-Link DGE-530T питаюсь поставить SLES 12 SP2 или SLES 11SP4, так их не распознает там нет драйверов. и на оф. http://www.dlink.ru/ru/products/7/55.html і http://www.dlink.ru/ru/products/7/702.html не подходят .
Заранее благодарен.
Спасибо сказали:
Аватара пользователя
Bizdelnick
Модератор
Сообщения: 20752
Статус: nulla salus bello
ОС: Debian GNU/Linux

Re: Необходима помощь

Сообщение Bizdelnick »

У SLES есть официальная техподдержка, почему бы не задать вопрос ей?
Пишите правильно:
в консоли
вку́пе (с чем-либо)
в общем
вообще
в течение (часа)
новичок
нюанс
по умолчанию
приемлемо
проблема
пробовать
трафик
Спасибо сказали:
tjoma
Сообщения: 108

Re: Необходима помощь

Сообщение tjoma »

Bizdelnick писал(а):
07.01.2017 13:53
У SLES есть официальная техподдержка, почему бы не задать вопрос ей?


Обращался пока нет никакого ответа
Спасибо сказали:
Аватара пользователя
Bizdelnick
Модератор
Сообщения: 20752
Статус: nulla salus bello
ОС: Debian GNU/Linux

Re: Необходима помощь

Сообщение Bizdelnick »

Как это — нет ответа? По регламенту должны отвечать не позднее следующего рабочего дня. Если не отвечают — за что Вы им деньги платите? (А если не платите — на кой чёрт Вам SLES?)
Пишите правильно:
в консоли
вку́пе (с чем-либо)
в общем
вообще
в течение (часа)
новичок
нюанс
по умолчанию
приемлемо
проблема
пробовать
трафик
Спасибо сказали:
Аватара пользователя
Goodvin
Ведущий рубрики
Сообщения: 4333
Статус: ⚝⚠⚒⚑⚖☭☞☣☤&

Re: Необходима помощь

Сообщение Goodvin »

tjoma писал(а):
10.01.2017 09:33
Bizdelnick писал(а):
07.01.2017 13:53
У SLES есть официальная техподдержка, почему бы не задать вопрос ей?


Обращался пока нет никакого ответа

Что, и в чате не отвечают?
И на телефонные звонки не отвечают?

Странно.
Спасибо сказали:
Kopilov
Сообщения: 947
ОС: [K]Ubuntu, Debian

Re: Необходима помощь

Сообщение Kopilov »

Goodvin писал(а):
10.01.2017 14:47
Странно.

:sarcasm:
-- Скажите, пожалуйста, как мне настроить систему.
-- I do not understand. Sorry, repeat, please.
Спасибо сказали:
Аватара пользователя
Goodvin
Ведущий рубрики
Сообщения: 4333
Статус: ⚝⚠⚒⚑⚖☭☞☣☤&

Re: Необходима помощь

Сообщение Goodvin »

Kopilov писал(а):
11.01.2017 00:55
Goodvin писал(а):
10.01.2017 14:47
Странно.

:sarcasm:
-- Скажите, пожалуйста, как мне настроить систему.
-- I do not understand. Sorry, repeat, please.

Тогда скорее так:
- Ich verstehe nicht. Wiederholen Sie Ihre Frage, bitte.

Антиоффтоп:
Судя по всему, ни вывода lspci, ни вывода dmesg, ни вывода lsmod, ни внятного описания симптомов проблемы мы от автора не увидим.
Видимо, как и техподдержка SLES.
Спасибо сказали:
tjoma
Сообщения: 108

Re: Необходима помощь

Сообщение tjoma »

Goodvin писал(а):
11.01.2017 13:04
Kopilov писал(а):
11.01.2017 00:55
Goodvin писал(а):
10.01.2017 14:47
Странно.

:sarcasm:
-- Скажите, пожалуйста, как мне настроить систему.
-- I do not understand. Sorry, repeat, please.

Тогда скорее так:
- Ich verstehe nicht. Wiederholen Sie Ihre Frage, bitte.

Антиоффтоп:
Судя по всему, ни вывода lspci, ни вывода dmesg, ни вывода lsmod, ни внятного описания симптомов проблемы мы от автора не увидим.
Видимо, как и техподдержка SLES.


Прошу прощения , не видел обсуждения.

1.jpg

2.jpg


dmesg

Код: Выделить всё

[sh=server-1:~ #][code]server-1:~ # dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.101-91-default (geeko@buildhost) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #1 SMP Mon Dec 12 13:06:13 UTC 2016 (544b9d1)
[    0.000000] Command line: root=/dev/disk/by-id/ata-WDC_WD3200AAJS-00B4A0_WD-WCAT1A056760-part3 resume=/dev/disk/by-id/ata-WDC_WD3200AAJS-00B4A0_WD-WCAT1A056760-part2 splash=silent crashkernel=256M-:128M vga=0x31a
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
[    0.000000]  BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable)
[    0.000000]  BIOS-e820: 00000000cfe90000 - 00000000cfe9e000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cfe9e000 - 00000000cfee0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfee0000 - 00000000cff00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: MSI MS-7623/785GM-P45 (MS-7623), BIOS V11.11 04/27/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000230000000 aka 8960M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xcfe90 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000096000] 96000 size 20480
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: 0000000000000000-00000000cfe90000
[    0.000000]  0000000000 - 00c0000000 page 1G
[    0.000000]  00c0000000 - 00cfe00000 page 2M
[    0.000000]  00cfe00000 - 00cfe90000 page 4k
[    0.000000] kernel direct mapping tables up to 0xcfe8ffff @ [mem 0x1fffd000-0x1fffffff]
[    0.000000] init_memory_mapping: 0000000100000000-0000000220000000
[    0.000000]  0100000000 - 0200000000 page 1G
[    0.000000]  0200000000 - 0220000000 page 2M
[    0.000000] kernel direct mapping tables up to 0x21fffffff @ [mem 0xcfe8e000-0xcfe8ffff]
[    0.000000] nmi ring buffer: 262144
[    0.000000] RAMDISK: 3776e000 - 37ff0000
[    0.000000] Reserving 128MB of memory at 752MB for crashkernel (System RAM: 8704MB)
[    0.000000] ACPI: RSDP 00000000000faa70 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 00000000cfe90000 00040 (v01 7623MS A7623200 20110427 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000cfe90200 00084 (v01 7623MS A7623200 20110427 MSFT 00000097)
[    0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110413/tbfadt-561)
[    0.000000] ACPI: DSDT 00000000cfe905d0 09FB8 (v01  A7623 A7623200 00000200 INTL 20051117)
[    0.000000] ACPI: FACS 00000000cfe9e000 00040
[    0.000000] ACPI: APIC 00000000cfe90390 0007C (v01 7623MS A7623200 20110427 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000cfe90410 0003C (v01 7623MS OEMMCFG  20110427 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000cfe9e040 00072 (v01 7623MS A7623200 20110427 MSFT 00000097)
[    0.000000] ACPI: SRAT 00000000cfe9a5d0 000C8 (v03 AMD    FAM_F_10 00000002 AMD  00000001)
[    0.000000] ACPI: HPET 00000000cfe9a6a0 00038 (v01 7623MS OEMHPET  20110427 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000cfe9a6e0 00458 (v01 A M I  POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: Node 0 PXM 0 0-a0000
[    0.000000] SRAT: Node 0 PXM 0 100000-d0000000
[    0.000000] SRAT: Node 0 PXM 0 100000000-230000000
[    0.000000] NUMA: Node 0 [0,a0000) + [100000,d0000000) -> [0,d0000000)
[    0.000000] NUMA: Node 0 [0,d0000000) + [100000000,220000000) -> [0,220000000)
[    0.000000] Initmem setup node 0 0000000000000000-0000000220000000
[    0.000000]   NODE_DATA [000000021ff99000 - 000000021ffbffff]
[    0.000000]  [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880217a00000-ffff88021e7fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00220000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009b
[    0.000000]     0: 0x00000100 -> 0x000cfe90
[    0.000000]     0: 0x00100000 -> 0x00220000
[    0.000000] On node 0 totalpages: 2031131
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3918 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833224 pages, LIFO batch:31
[    0.000000]   Normal zone: 16128 pages used for memmap
[    0.000000]   Normal zone: 1163520 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[    0.000000] SMP: Allowing 6 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[    0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
[    0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000cfe90000 - 00000000cfe9e000
[    0.000000] PM: Registered nosave memory: 00000000cfe9e000 - 00000000cfee0000
[    0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cff00000
[    0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000fff00000
[    0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:30000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:4096 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1
[    0.000000] PERCPU: Embedded 25 pages/cpu @ffff88021fc00000 s71680 r8192 d22528 u262144
[    0.000000] pcpu-alloc: s71680 r8192 d22528 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2000662
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/disk/by-id/ata-WDC_WD3200AAJS-00B4A0_WD-WCAT1A056760-part3 resume=/dev/disk/by-id/ata-WDC_WD3200AAJS-00B4A0_WD-WCAT1A056760-part2 splash=silent crashkernel=256M-:128M vga=0x31a
[    0.000000] bootsplash: silent mode.
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ c4000000 size 32 MB
[    0.000000] Aperture pointing to e820 RAM. Ignoring.
[    0.000000] Your BIOS doesn't leave an aperture memory hole
[    0.000000] Please enable the IOMMU option in the BIOS setup
[    0.000000] This costs you 64 MB of RAM
[    0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[    0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[    0.000000] Memory: 7722908k/8912896k available (4568k kernel code, 788372k absent, 401616k reserved, 7579k data, 1360k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:262400 nr_irqs:728 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 65011712 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 3479.992 MHz processor.
[    0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6959.98 BogoMIPS (lpj=13919968)
[    0.008008] pid_max: default: 32768 minimum: 301
[    0.008249] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
[    0.008436] Security Framework initialized
[    0.008449] AppArmor: AppArmor initialized
[    0.008827] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.010847] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.012013] Mount-cache hash table entries: 256
[    0.012133] Initializing cgroup subsys cpuacct
[    0.012137] Initializing cgroup subsys memory
[    0.012151] Initializing cgroup subsys devices
[    0.012153] Initializing cgroup subsys freezer
[    0.012155] Initializing cgroup subsys net_cls
[    0.012157] Initializing cgroup subsys blkio
[    0.012162] Initializing cgroup subsys perf_event
[    0.012206] tseg: 0000000000
[    0.012213] CPU: Physical Processor ID: 0
[    0.012214] CPU: Processor Core ID: 0
[    0.012216] mce: CPU supports 6 MCE banks
[    0.012576] ACPI: Core revision 20110413
[    0.016389] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.057784] CPU0: AMD Athlon(tm) II X2 245 Processor stepping 02
[    0.060003] Performance Events: AMD PMU driver.
[    0.060003] ... version:                0
[    0.060003] ... bit width:              48
[    0.060003] ... generic registers:      4
[    0.060003] ... value mask:             0000ffffffffffff
[    0.060003] ... max period:             00007fffffffffff
[    0.060003] ... fixed-purpose events:   0
[    0.060003] ... event mask:             000000000000000f
[    0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.060003] Booting Node   0, Processors  #1
[    0.068019] NMI watchdog enabled, takes one hw-pmu counter.
[    0.068035] Brought up 2 CPUs
[    0.068037] Total of 2 processors activated (13919.96 BogoMIPS).
[    0.068383] devtmpfs: initialized
[    0.072033] PM: Registering ACPI NVS region at cfe9e000 (270336 bytes)
[    0.072132] print_constraints: dummy:
[    0.072163] Time:  8:23:19  Date: 01/12/17
[    0.072231] NET: Registered protocol family 16
[    0.072307] node 0 link 0: io port [1000, ffffff]
[    0.072309] TOM: 00000000d0000000 aka 3328M
[    0.072312] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.072314] node 0 link 0: mmio [a0000, bffff]
[    0.072316] node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
[    0.072318] node 0 link 0: mmio [f0000000, fe5fffff]
[    0.072320] node 0 link 0: mmio [fe600000, fe7fffff]
[    0.072321] node 0 link 0: mmio [fe800000, ffefffff]
[    0.072323] TOM2: 0000000230000000 aka 8960M
[    0.072325] bus: [00, 07] on node 0 link 0
[    0.072326] bus: 00 index 0 [io  0x0000-0xffff]
[    0.072328] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[    0.072329] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
[    0.072330] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[    0.072331] bus: 00 index 4 [mem 0x230000000-0xfcffffffff]
[    0.072393] ACPI: bus type pci registered
[    0.072435] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.072438] PCI: not using MMCONFIG
[    0.072440] PCI: Using configuration type 1 for base access
[    0.072442] PCI: Using configuration type 1 for extended access
[    0.072920] bio: create slab <bio-0> at 0
[    0.076039] ACPI: EC: Look up EC in DSDT
[    0.077089] ACPI: Executed 4 blocks of module-level executable AML code
[    0.080100] ACPI: Interpreter enabled
[    0.080104] ACPI: (supports S0 S3 S4 S5)
[    0.080120] ACPI: Using IOAPIC for interrupt routing
[    0.080142] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.080934] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.093344] ACPI: No dock devices found.
[    0.093349] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.093422] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.093568] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.093571] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.093574] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.093577] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[    0.093579] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xdfffffff]
[    0.093582] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[    0.093595] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
[    0.093631] pci 0000:00:01.0: [1022:9602] type 1 class 0x000604
[    0.093658] pci 0000:00:04.0: [1022:9604] type 1 class 0x000604
[    0.093682] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.093684] pci 0000:00:04.0: PME# disabled
[    0.093694] pci 0000:00:05.0: [1022:9605] type 1 class 0x000604
[    0.093717] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.093719] pci 0000:00:05.0: PME# disabled
[    0.093729] pci 0000:00:06.0: [1022:9606] type 1 class 0x000604
[    0.093753] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.093754] pci 0000:00:06.0: PME# disabled
[    0.093781] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[    0.093797] pci 0000:00:11.0: reg 10: [io  0x9000-0x9007]
[    0.093805] pci 0000:00:11.0: reg 14: [io  0x8000-0x8003]
[    0.093813] pci 0000:00:11.0: reg 18: [io  0x7000-0x7007]
[    0.093821] pci 0000:00:11.0: reg 1c: [io  0x6000-0x6003]
[    0.093830] pci 0000:00:11.0: reg 20: [io  0x5000-0x500f]
[    0.093838] pci 0000:00:11.0: reg 24: [mem 0xfe5ffc00-0xfe5fffff]
[    0.093891] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[    0.093901] pci 0000:00:12.0: reg 10: [mem 0xfe5fe000-0xfe5fefff]
[    0.093960] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[    0.093971] pci 0000:00:12.1: reg 10: [mem 0xfe5fd000-0xfe5fdfff]
[    0.094035] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[    0.094051] pci 0000:00:12.2: reg 10: [mem 0xfe5ff800-0xfe5ff8ff]
[    0.094126] pci 0000:00:12.2: supports D1 D2
[    0.094127] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.094130] pci 0000:00:12.2: PME# disabled
[    0.094149] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[    0.094159] pci 0000:00:13.0: reg 10: [mem 0xfe5fc000-0xfe5fcfff]
[    0.094218] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[    0.094229] pci 0000:00:13.1: reg 10: [mem 0xfe5f7000-0xfe5f7fff]
[    0.094293] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[    0.094309] pci 0000:00:13.2: reg 10: [mem 0xfe5ff400-0xfe5ff4ff]
[    0.094383] pci 0000:00:13.2: supports D1 D2
[    0.094385] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.094388] pci 0000:00:13.2: PME# disabled
[    0.094410] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[    0.094499] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[    0.094513] pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
[    0.094521] pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
[    0.094529] pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
[    0.094537] pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
[    0.094545] pci 0000:00:14.1: reg 20: [io  0xff00-0xff0f]
[    0.094598] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[    0.094616] pci 0000:00:14.2: reg 10: [mem 0xfe5f0000-0xfe5f3fff 64bit]
[    0.094676] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.094680] pci 0000:00:14.2: PME# disabled
[    0.094691] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[    0.094760] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[    0.094797] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[    0.094808] pci 0000:00:14.5: reg 10: [mem 0xfe5f6000-0xfe5f6fff]
[    0.094869] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[    0.094880] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[    0.094890] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[    0.094899] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[    0.094911] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[    0.094948] pci 0000:01:05.0: [1002:9710] type 0 class 0x000300
[    0.094953] pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[    0.094957] pci 0000:01:05.0: reg 14: [io  0xa000-0xa0ff]
[    0.094960] pci 0000:01:05.0: reg 18: [mem 0xfe7f0000-0xfe7fffff]
[    0.094967] pci 0000:01:05.0: reg 24: [mem 0xfe600000-0xfe6fffff]
[    0.094979] pci 0000:01:05.0: supports D1 D2
[    0.094987] pci 0000:01:05.1: [1002:970f] type 0 class 0x000403
[    0.094992] pci 0000:01:05.1: reg 10: [mem 0xfe7e8000-0xfe7ebfff]
[    0.095013] pci 0000:01:05.1: supports D1 D2
[    0.095051] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.095054] pci 0000:00:01.0:   bridge window [io  0xa000-0xafff]
[    0.095056] pci 0000:00:01.0:   bridge window [mem 0xfe600000-0xfe7fffff]
[    0.095059] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.095087] pci 0000:02:00.0: [1186:4300] type 0 class 0x000200
[    0.095097] pci 0000:02:00.0: reg 10: [io  0xb800-0xb8ff]
[    0.095115] pci 0000:02:00.0: reg 18: [mem 0xfe8ff000-0xfe8fffff 64bit]
[    0.095126] pci 0000:02:00.0: reg 20: [mem 0xfdefc000-0xfdefffff 64bit pref]
[    0.095134] pci 0000:02:00.0: reg 30: [mem 0xfe8e0000-0xfe8effff pref]
[    0.095176] pci 0000:02:00.0: supports D1 D2
[    0.095177] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.095180] pci 0000:02:00.0: PME# disabled
[    0.100029] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[    0.100037] pci 0000:00:04.0:   bridge window [io  0xb000-0xbfff]
[    0.100040] pci 0000:00:04.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.100043] pci 0000:00:04.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[    0.100085] pci 0000:03:00.0: [1969:1063] type 0 class 0x000200
[    0.100104] pci 0000:03:00.0: reg 10: [mem 0xfe9c0000-0xfe9fffff 64bit]
[    0.100113] pci 0000:03:00.0: reg 18: [io  0xc800-0xc87f]
[    0.100197] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.100201] pci 0000:03:00.0: PME# disabled
[    0.108030] pci 0000:00:05.0: PCI bridge to [bus 03-03]
[    0.108038] pci 0000:00:05.0:   bridge window [io  0xc000-0xcfff]
[    0.108040] pci 0000:00:05.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.108043] pci 0000:00:05.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.108080] pci 0000:04:00.0: [1186:4300] type 0 class 0x000200
[    0.108091] pci 0000:04:00.0: reg 10: [io  0xd800-0xd8ff]
[    0.108109] pci 0000:04:00.0: reg 18: [mem 0xfeaff000-0xfeafffff 64bit]
[    0.108120] pci 0000:04:00.0: reg 20: [mem 0xfdffc000-0xfdffffff 64bit pref]
[    0.108128] pci 0000:04:00.0: reg 30: [mem 0xfeae0000-0xfeaeffff pref]
[    0.108172] pci 0000:04:00.0: supports D1 D2
[    0.108174] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.108177] pci 0000:04:00.0: PME# disabled
[    0.116031] pci 0000:00:06.0: PCI bridge to [bus 04-04]
[    0.116038] pci 0000:00:06.0:   bridge window [io  0xd000-0xdfff]
[    0.116040] pci 0000:00:06.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.116043] pci 0000:00:06.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.116076] pci 0000:05:02.0: [1186:4300] type 0 class 0x000200
[    0.116095] pci 0000:05:02.0: reg 10: [io  0xe800-0xe8ff]
[    0.116106] pci 0000:05:02.0: reg 14: [mem 0xfebffc00-0xfebffcff]
[    0.116154] pci 0000:05:02.0: reg 30: [mem 0xfebc0000-0xfebdffff pref]
[    0.116191] pci 0000:05:02.0: supports D1 D2
[    0.116192] pci 0000:05:02.0: PME# supported from D1 D2 D3hot D3cold
[    0.116196] pci 0000:05:02.0: PME# disabled
[    0.116243] pci 0000:00:14.4: PCI bridge to [bus 05-05] (subtractive decode)
[    0.116248] pci 0000:00:14.4:   bridge window [io  0xe000-0xefff]
[    0.116251] pci 0000:00:14.4:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.116255] pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.116257] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.116258] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.116260] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.116262] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.116263] pci 0000:00:14.4:   bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode)
[    0.116265] pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[    0.116281] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.116462] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[    0.116507] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.116537] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
[    0.116558] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
[    0.116580] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
[    0.116609]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.116612]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.116615] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.121582] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
[    0.121619] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
[    0.121653] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 *7 10 11 12 14 15)
[    0.121686] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
[    0.121719] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 *10 11 12 14 15)
[    0.121753] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.121787] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 12 14 15)
[    0.121822] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.121888] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.121893] vgaarb: loaded
[    0.121955] PCI: Using ACPI for IRQ routing
[    0.129891] PCI: pci_cache_line_size set to 64 bytes
[    0.129961] reserve RAM buffer: 000000000009b400 - 000000000009ffff
[    0.129963] reserve RAM buffer: 00000000cfe90000 - 00000000cfffffff
[    0.130034] NetLabel: Initializing
[    0.130036] NetLabel:  domain hash size = 128
[    0.130038] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.130046] NetLabel:  unlabeled traffic allowed by default
[    0.130054] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.130058] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.132034] Switching to clocksource hpet
[    0.133037] AppArmor: AppArmor Filesystem Enabled
[    0.133061] pnp: PnP ACPI init
[    0.133075] ACPI: bus type pnp registered
[    0.133183] pnp 00:00: [bus 00-ff]
[    0.133184] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.133186] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.133187] pnp 00:00: [io  0x0d00-0xffff window]
[    0.133189] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.133191] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.133192] pnp 00:00: [mem 0xcff00000-0xdfffffff window]
[    0.133194] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[    0.133239] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.133261] pnp 00:01: [dma 4]
[    0.133263] pnp 00:01: [io  0x0000-0x000f]
[    0.133265] pnp 00:01: [io  0x0081-0x0083]
[    0.133266] pnp 00:01: [io  0x0087]
[    0.133267] pnp 00:01: [io  0x0089-0x008b]
[    0.133268] pnp 00:01: [io  0x008f]
[    0.133269] pnp 00:01: [io  0x00c0-0x00df]
[    0.133286] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.133294] pnp 00:02: [io  0x0070-0x0071]
[    0.133306] pnp 00:02: [irq 8]
[    0.133325] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.133331] pnp 00:03: [io  0x0061]
[    0.133348] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.133355] pnp 00:04: [io  0x00f0-0x00ff]
[    0.133362] pnp 00:04: [irq 13]
[    0.133380] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.133577] pnp 00:05: [io  0x03f8-0x03ff]
[    0.133581] pnp 00:05: [irq 4]
[    0.133582] pnp 00:05: [dma 0 disabled]
[    0.133622] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.133809] pnp 00:06: [io  0x02f8-0x02ff]
[    0.133813] pnp 00:06: [irq 3]
[    0.133815] pnp 00:06: [dma 0 disabled]
[    0.133868] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.134189] pnp 00:07: [io  0x0378-0x037f]
[    0.134192] pnp 00:07: [irq 5]
[    0.134193] pnp 00:07: [dma 0 disabled]
[    0.134283] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.134305] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[    0.134323] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.134387] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[    0.134389] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[    0.134432] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.134436] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.134439] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.134549] pnp 00:0a: [io  0x0010-0x001f]
[    0.134550] pnp 00:0a: [io  0x0022-0x003f]
[    0.134551] pnp 00:0a: [io  0x0062-0x0063]
[    0.134553] pnp 00:0a: [io  0x0065-0x006f]
[    0.134554] pnp 00:0a: [io  0x0072-0x007f]
[    0.134555] pnp 00:0a: [io  0x0080]
[    0.134556] pnp 00:0a: [io  0x0084-0x0086]
[    0.134557] pnp 00:0a: [io  0x0088]
[    0.134558] pnp 00:0a: [io  0x008c-0x008e]
[    0.134560] pnp 00:0a: [io  0x0090-0x009f]
[    0.134561] pnp 00:0a: [io  0x00a2-0x00bf]
[    0.134562] pnp 00:0a: [io  0x00b1]
[    0.134563] pnp 00:0a: [io  0x00e0-0x00ef]
[    0.134564] pnp 00:0a: [io  0x04d0-0x04d1]
[    0.134565] pnp 00:0a: [io  0x040b]
[    0.134567] pnp 00:0a: [io  0x04d6]
[    0.134568] pnp 00:0a: [io  0x0c00-0x0c01]
[    0.134569] pnp 00:0a: [io  0x0c14]
[    0.134570] pnp 00:0a: [io  0x0c50-0x0c51]
[    0.134571] pnp 00:0a: [io  0x0c52]
[    0.134572] pnp 00:0a: [io  0x0c6c]
[    0.134573] pnp 00:0a: [io  0x0c6f]
[    0.134575] pnp 00:0a: [io  0x0cd0-0x0cd1]
[    0.134576] pnp 00:0a: [io  0x0cd2-0x0cd3]
[    0.134577] pnp 00:0a: [io  0x0cd4-0x0cd5]
[    0.134578] pnp 00:0a: [io  0x0cd6-0x0cd7]
[    0.134580] pnp 00:0a: [io  0x0cd8-0x0cdf]
[    0.134581] pnp 00:0a: [io  0x0800-0x089f]
[    0.134582] pnp 00:0a: [io  0x0000-0xffffffffffffffff disabled]
[    0.134583] pnp 00:0a: [io  0x0b00-0x0b0f]
[    0.134585] pnp 00:0a: [io  0x0b20-0x0b3f]
[    0.134586] pnp 00:0a: [io  0x0900-0x090f]
[    0.134588] pnp 00:0a: [io  0x0910-0x091f]
[    0.134589] pnp 00:0a: [io  0xfe00-0xfefe]
[    0.134590] pnp 00:0a: [io  0x0060-0x005f disabled]
[    0.134592] pnp 00:0a: [io  0x0064-0x0063 disabled]
[    0.134593] pnp 00:0a: [mem 0xffb80000-0xffbfffff]
[    0.134594] pnp 00:0a: [mem 0xfec10000-0xfec1001f]
[    0.134657] system 00:0a: [io  0x04d0-0x04d1] has been reserved
[    0.134660] system 00:0a: [io  0x040b] has been reserved
[    0.134663] system 00:0a: [io  0x04d6] has been reserved
[    0.134665] system 00:0a: [io  0x0c00-0x0c01] has been reserved
[    0.134668] system 00:0a: [io  0x0c14] has been reserved
[    0.134670] system 00:0a: [io  0x0c50-0x0c51] has been reserved
[    0.134673] system 00:0a: [io  0x0c52] has been reserved
[    0.134675] system 00:0a: [io  0x0c6c] has been reserved
[    0.134678] system 00:0a: [io  0x0c6f] has been reserved
[    0.134680] system 00:0a: [io  0x0cd0-0x0cd1] has been reserved
[    0.134683] system 00:0a: [io  0x0cd2-0x0cd3] has been reserved
[    0.134685] system 00:0a: [io  0x0cd4-0x0cd5] has been reserved
[    0.134688] system 00:0a: [io  0x0cd6-0x0cd7] has been reserved
[    0.134690] system 00:0a: [io  0x0cd8-0x0cdf] has been reserved
[    0.134693] system 00:0a: [io  0x0800-0x089f] has been reserved
[    0.134696] system 00:0a: [io  0x0b00-0x0b0f] has been reserved
[    0.134698] system 00:0a: [io  0x0b20-0x0b3f] has been reserved
[    0.134701] system 00:0a: [io  0x0900-0x090f] has been reserved
[    0.134704] system 00:0a: [io  0x0910-0x091f] has been reserved
[    0.134707] system 00:0a: [io  0xfe00-0xfefe] has been reserved
[    0.134710] system 00:0a: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.134714] system 00:0a: [mem 0xfec10000-0xfec1001f] has been reserved
[    0.134716] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.134736] pnp 00:0b: [io  0x0060]
[    0.134738] pnp 00:0b: [io  0x0064]
[    0.134744] pnp 00:0b: [irq 1]
[    0.134769] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.134851] pnp 00:0c: [io  0x0000-0xffffffffffffffff disabled]
[    0.134853] pnp 00:0c: [io  0x0600-0x060f]
[    0.134854] pnp 00:0c: [io  0x0ae0-0x0aef]
[    0.134886] system 00:0c: [io  0x0600-0x060f] has been reserved
[    0.134889] system 00:0c: [io  0x0ae0-0x0aef] has been reserved
[    0.134892] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.134925] pnp 00:0d: [mem 0xe0000000-0xefffffff]
[    0.134957] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[    0.134961] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.135043] pnp 00:0e: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.135045] pnp 00:0e: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.135079] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.135186] pnp 00:0f: [mem 0x00000000-0x0009ffff]
[    0.135188] pnp 00:0f: [mem 0x000c0000-0x000cffff]
[    0.135189] pnp 00:0f: [mem 0x000e0000-0x000fffff]
[    0.135190] pnp 00:0f: [mem 0x00100000-0xcfefffff]
[    0.135192] pnp 00:0f: [mem 0xfec00000-0xffffffff]
[    0.135230] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.135233] system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.135236] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.135240] system 00:0f: [mem 0x00100000-0xcfefffff] could not be reserved
[    0.135242] system 00:0f: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.135245] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.135328] pnp: PnP ACPI: found 16 devices
[    0.135330] ACPI: ACPI bus type pnp unregistered
[    0.140898] PCI: max bus depth: 1 pci_try_num: 2
[    0.140914] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.140918] pci 0000:00:01.0:   bridge window [io  0xa000-0xafff]
[    0.140921] pci 0000:00:01.0:   bridge window [mem 0xfe600000-0xfe7fffff]
[    0.140924] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.140928] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[    0.140930] pci 0000:00:04.0:   bridge window [io  0xb000-0xbfff]
[    0.140933] pci 0000:00:04.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.140936] pci 0000:00:04.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[    0.140940] pci 0000:00:05.0: PCI bridge to [bus 03-03]
[    0.140942] pci 0000:00:05.0:   bridge window [io  0xc000-0xcfff]
[    0.140945] pci 0000:00:05.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.140948] pci 0000:00:05.0:   bridge window [mem pref disabled]
[    0.140951] pci 0000:00:06.0: PCI bridge to [bus 04-04]
[    0.140953] pci 0000:00:06.0:   bridge window [io  0xd000-0xdfff]
[    0.140956] pci 0000:00:06.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.140959] pci 0000:00:06.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.140963] pci 0000:00:14.4: PCI bridge to [bus 05-05]
[    0.140966] pci 0000:00:14.4:   bridge window [io  0xe000-0xefff]
[    0.140971] pci 0000:00:14.4:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.140975] pci 0000:00:14.4:   bridge window [mem pref disabled]
[    0.140993] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.140996] pci 0000:00:04.0: setting latency timer to 64
[    0.141003] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.141006] pci 0000:00:05.0: setting latency timer to 64
[    0.141011] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.141014] pci 0000:00:06.0: setting latency timer to 64
[    0.141020] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.141021] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.141023] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.141024] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.141026] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff]
[    0.141027] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.141029] pci_bus 0000:01: resource 0 [io  0xa000-0xafff]
[    0.141030] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe7fffff]
[    0.141032] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.141033] pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
[    0.141035] pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.141036] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[    0.141038] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    0.141039] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.141041] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.141042] pci_bus 0000:04: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.141044] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.141046] pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
[    0.141047] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.141048] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.141050] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.141051] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.141053] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[    0.141054] pci_bus 0000:05: resource 8 [mem 0xcff00000-0xdfffffff]
[    0.141056] pci_bus 0000:05: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.141185] NET: Registered protocol family 2
[    0.141347] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.142370] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.144277] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.144513] TCP: Hash tables configured (established 524288 bind 65536)
[    0.144516] TCP reno registered
[    0.144528] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.144575] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.144766] NET: Registered protocol family 1
[    0.144776] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[    0.144796] pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.268045] pci 0000:00:12.0: PCI INT A disabled
[    0.268062] pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.348058] pci 0000:00:12.1: PCI INT A disabled
[    0.348075] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.348108] pci 0000:00:12.2: PCI INT B disabled
[    0.348116] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.428054] pci 0000:00:13.0: PCI INT A disabled
[    0.428070] pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.508050] pci 0000:00:13.1: PCI INT A disabled
[    0.508075] pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.508108] pci 0000:00:13.2: PCI INT B disabled
[    0.508126] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.588049] pci 0000:00:14.5: PCI INT C disabled
[    0.588070] pci 0000:01:05.0: Boot video device
[    0.588080] PCI: CLS 64 bytes, default 64
[    0.588118] Unpacking initramfs...
[    0.687806] Freeing initrd memory: 8712k freed
[    0.690461] PCI-DMA: Disabling AGP.
[    0.690541] PCI-DMA: aperture base @ c4000000 size 65536 KB
[    0.690543] PCI-DMA: using GART IOMMU.
[    0.690547] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.692867] futex hash table entries: 2048 (order: 6, 262144 bytes)
[    0.692906] Initialise module verification
[    0.693000] audit: initializing netlink socket (disabled)
[    0.693011] type=2000 audit(1484209399.692:1): initialized
[    0.706472] bounce pool size: 64 pages
[    0.706482] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.707531] VFS: Disk quotas dquot_6.5.2
[    0.707582] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.707671] msgmni has been set to 3807
[    0.707902] alg: No test for stdrng (krng)
[    0.707912] Asymmetric key parser 'x509' registered
[    0.707965] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.707996] io scheduler noop registered
[    0.708000] io scheduler deadline registered
[    0.708034] io scheduler cfq registered (default)
[    0.708178] pcieport 0000:00:04.0: setting latency timer to 64
[    0.708205] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[    0.708304] pcieport 0000:00:05.0: setting latency timer to 64
[    0.708321] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[    0.708366] pcieport 0000:00:06.0: setting latency timer to 64
[    0.708382] pcieport 0000:00:06.0: irq 42 for MSI/MSI-X
[    0.708520] vesafb: mode is 1280x1024x16, linelength=2560, pages=5
[    0.708525] vesafb: scrolling: redraw
[    0.708528] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    0.708723] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011880000, using 5120k, total 16384k
[    0.708818] bootsplash 3.2.0-2010/03/31: looking for picture...
[    0.708819] bootsplash: silentjpeg size 74123 bytes
[    0.720638] bootsplash: ...found (1280x1024, 40629 bytes, v3).
[    0.814892] Console: switching to colour frame buffer device 156x60
[    0.909544] fb0: VESA VGA frame buffer device
[    0.909593] GHES: HEST is not enabled!
[    0.909654] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    0.909760] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.920468] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.176213] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.212185] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.248283] Non-volatile memory driver v1.3
[    1.248290] Linux agpgart interface v0.103
[    1.248328] Fixed MDIO Bus: probed
[    1.248362] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.248365] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.248498] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.248541] mousedev: PS/2 mouse device common for all mice
[    1.248644] cpuidle: using governor ladder
[    1.248651] cpuidle: using governor menu
[    1.248654] EFI Variables Facility v0.08 2004-May-17
[    1.248835] TCP cubic registered
[    1.248847] Registering the dns_resolver key type
[    1.248922] Loading module verification certificates
[    1.248944] MODSIGN: Loaded cert 'SUSE Linux Enterprise Secure Boot Signkey: 3fb077b6cebc6ff2522e1c148c57c777c788e3e7'
[    1.248959] MODSIGN: Loaded cert 'SUSE Linux Enterprise Secure Boot Signkey: 3fb077b6cebc6ff2522e1c148c57c777c788e3e7'
[    1.248963] PM: Checking hibernation image partition /dev/disk/by-id/ata-WDC_WD3200AAJS-00B4A0_WD-WCAT1A056760-part2
[    1.265877] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.265937] PM: Hibernation image not present or could not be loaded.
[    1.265949] registered taskstats version 1
[    1.266522]   Magic number: 1:539:371
[    1.268124] Freeing unused kernel memory: 1360k freed
[    1.268398] Write protecting the kernel read-only data: 10240k
[    1.271409] Freeing unused kernel memory: 1556k freed
[    1.273612] Freeing unused kernel memory: 900k freed
[    1.309440] SCSI subsystem initialized
[    1.310744] libata version 3.00 loaded.
[    1.311378] ahci 0000:00:11.0: version 3.0
[    1.311403] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    1.311569] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    1.311626] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[    1.312314] scsi0 : ahci
[    1.312503] scsi1 : ahci
[    1.312646] scsi2 : ahci
[    1.312789] scsi3 : ahci
[    1.312906] scsi4 : ahci
[    1.313024] scsi5 : ahci
[    1.313112] ata2: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffd00 irq 22
[    1.313167] ata3: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffd80 irq 22
[    1.313221] ata4: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffe00 irq 22
[    1.313275] ata5: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffe80 irq 22
[    1.313329] ata6: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5fff00 irq 22
[    1.313383] ata7: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5fff80 irq 22
[    1.632071] ata6: SATA link down (SStatus 0 SControl 300)
[    1.632161] ata2: SATA link down (SStatus 0 SControl 300)
[    1.632253] ata5: SATA link down (SStatus 0 SControl 300)
[    1.632343] ata7: SATA link down (SStatus 0 SControl 300)
[    1.632448] ata4: SATA link down (SStatus 0 SControl 300)
[    1.704041] Refined TSC clocksource calibration: 3480.108 MHz.
[    1.704103] Switching to clocksource tsc
[    1.804041] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.804999] ata3.00: ATA-8: WDC WD3200AAJS-00B4A0, 01.03A01, max UDMA/133
[    1.805055] ata3.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.806108] ata3.00: configured for UDMA/133
[    1.806321] scsi 1:0:0:0: Direct-Access     ATA      WDC WD3200AAJS-0 01.0 PQ: 0 ANSI: 5
[    1.810803] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.810881] pata_atiixp 0000:00:14.1: setting latency timer to 64
[    1.811113] scsi6 : pata_atiixp
[    1.811232] scsi7 : pata_atiixp
[    1.811768] ata8: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    1.811824] ata9: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    1.976533] ata8.00: ATAPI: _NEC DVD_RW ND-3550A, 1.05, max UDMA/33
[    1.992452] ata8.00: configured for UDMA/33
[    1.995535] scsi 6:0:0:0: CD-ROM            _NEC     DVD_RW ND-3550A  1.05 PQ: 0 ANSI: 5
[    2.004968] hp_sw: device handler registered
[    2.009226] emc: device handler registered
[    2.013568] alua: device handler registered
[    2.017899] rdac: device handler registered
[    2.020668] udev: starting version 147
[    2.036986] usbcore: registered new interface driver usbfs
[    2.037062] usbcore: registered new interface driver hub
[    2.046508] usbcore: registered new device driver usb
[    2.046908] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.047000] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    2.047090] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    2.047165] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    2.047231] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.047311] ehci_hcd 0000:00:12.2: debug port 1
[    2.047392] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe5ff800
[    2.055303] ACPI: acpi_idle registered with cpuidle
[    2.056023] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    2.056100] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.056149] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.056198] usb usb1: Product: EHCI Host Controller
[    2.056246] usb usb1: Manufacturer: Linux 3.0.101-91-default ehci_hcd
[    2.056295] usb usb1: SerialNumber: 0000:00:12.2
[    2.056432] hub 1-0:1.0: USB hub found
[    2.056483] hub 1-0:1.0: 6 ports detected
[    2.057253] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.057335] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    2.057398] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[    2.057462] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.057537] ehci_hcd 0000:00:13.2: debug port 1
[    2.057617] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe5ff400
[    2.068028] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    2.068105] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.068154] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.068203] usb usb2: Product: EHCI Host Controller
[    2.068251] usb usb2: Manufacturer: Linux 3.0.101-91-default ehci_hcd
[    2.068299] usb usb2: SerialNumber: 0000:00:13.2
[    2.068442] hub 2-0:1.0: USB hub found
[    2.068493] hub 2-0:1.0: 6 ports detected
[    2.083930] sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.084089] sd 1:0:0:0: [sda] Write Protect is off
[    2.084144] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.084156] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.089927] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.090014] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.090085] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    2.090148] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[    2.090234] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe5fe000
[    2.098049]  sda: sda1 sda2 sda3 sda4
[    2.098331] sd 1:0:0:0: [sda] Attached SCSI disk
[    2.148035] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.148093] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.148143] usb usb3: Product: OHCI Host Controller
[    2.148192] usb usb3: Manufacturer: Linux 3.0.101-91-default ohci_hcd
[    2.148242] usb usb3: SerialNumber: 0000:00:12.0
[    2.148397] hub 3-0:1.0: USB hub found
[    2.148451] hub 3-0:1.0: 3 ports detected
[    2.148584] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.148667] ohci_hcd 0000:00:12.1: OHCI Host Controller
[    2.148732] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[    2.148805] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe5fd000
[    2.208040] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.208096] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.208145] usb usb4: Product: OHCI Host Controller
[    2.208193] usb usb4: Manufacturer: Linux 3.0.101-91-default ohci_hcd
[    2.208242] usb usb4: SerialNumber: 0000:00:12.1
[    2.208389] hub 4-0:1.0: USB hub found
[    2.208446] hub 4-0:1.0: 3 ports detected
[    2.208626] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.208709] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    2.208770] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[    2.208852] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe5fc000
[    2.272033] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.272089] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.272139] usb usb5: Product: OHCI Host Controller
[    2.272188] usb usb5: Manufacturer: Linux 3.0.101-91-default ohci_hcd
[    2.272236] usb usb5: SerialNumber: 0000:00:13.0
[    2.272386] hub 5-0:1.0: USB hub found
[    2.272440] hub 5-0:1.0: 3 ports detected
[    2.272575] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.272651] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    2.272711] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[    2.272785] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe5f7000
[    2.332027] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.332085] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.332135] usb usb6: Product: OHCI Host Controller
[    2.332184] usb usb6: Manufacturer: Linux 3.0.101-91-default ohci_hcd
[    2.332233] usb usb6: SerialNumber: 0000:00:13.1
[    2.332382] hub 6-0:1.0: USB hub found
[    2.332436] hub 6-0:1.0: 3 ports detected
[    2.332573] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.332649] ohci_hcd 0000:00:14.5: OHCI Host Controller
[    2.332710] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[    2.332785] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe5f6000
[    2.392031] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    2.392088] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.392144] usb usb7: Product: OHCI Host Controller
[    2.392199] usb usb7: Manufacturer: Linux 3.0.101-91-default ohci_hcd
[    2.392254] usb usb7: SerialNumber: 0000:00:14.5
[    2.392412] hub 7-0:1.0: USB hub found
[    2.392467] hub 7-0:1.0: 2 ports detected
[    2.424369] usb 2-3: new high-speed USB device number 2 using ehci_hcd
[    2.511322] [drm] Initialized drm 1.1.0 20060810
[    2.516462] [drm] radeon defaulting to kernel modesetting.
[    2.516518] [drm] radeon kernel modesetting enabled.
[    2.516631] checking generic (d0000000 1000000) vs hw (d0000000 10000000)
[    2.516635] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[    2.516719] Console: switching to colour dummy device 80x25
[    2.516969] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.516974] radeon 0000:01:05.0: setting latency timer to 64
[    2.517078] [drm] initializing kernel modesetting (RS880 0x1002:0x9710 0x1462:0x7623).
[    2.517099] [drm] register mmio base: 0xFE7F0000
[    2.517102] [drm] register mmio size: 65536
[    2.517621] ATOM BIOS: 113
[    2.517634] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[    2.517637] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[    2.517794] [drm] Detected VRAM RAM=256M, BAR=256M
[    2.517800] [drm] RAM width 32bits DDR
[    2.517859] [TTM] Zone  kernel: Available graphics memory: 3900694 kiB
[    2.517862] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    2.517864] [TTM] Initializing pool allocator
[    2.517868] [TTM] Initializing DMA pool allocator
[    2.517890] [drm] radeon: 256M of VRAM memory ready
[    2.517892] [drm] radeon: 512M of GTT memory ready.
[    2.517906] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.517908] [drm] Driver supports precise vblank timestamp query.
[    2.517922] [drm] radeon: irq initialized.
[    2.517927] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    2.518716] [drm] Loading RS780 Microcode
[    2.522572] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[    2.522644] radeon 0000:01:05.0: WB enabled
[    2.522647] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff88020ea30c00
[    2.522842] radeon 0000:01:05.0: setting latency timer to 64
[    2.554330] [drm] ring test on 0 succeeded in 1 usecs
[    2.554398] [drm] ib test on ring 0 succeeded in 0 usecs
[    2.554538] [drm] Radeon Display Connectors
[    2.554541] [drm] Connector 0:
[    2.554542] [drm]   VGA-1
[    2.554544] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[    2.554547] [drm]   Encoders:
[    2.554548] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.554550] [drm] Connector 1:
[    2.554552] [drm]   HDMI-A-1
[    2.554553] [drm]   HPD3
[    2.554555] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[    2.554557] [drm]   Encoders:
[    2.554558] [drm]     DFP3: INTERNAL_KLDSCP_LVTMA
[    2.554575] [drm] radeon: power management initialized
[    2.564619] usb 2-3: New USB device found, idVendor=8564, idProduct=1000
[    2.564626] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.564629] usb 2-3: Product: Mass Storage Device
[    2.564631] usb 2-3: Manufacturer: JetFlash
[    2.564632] usb 2-3: SerialNumber: B1ESEY6I
[    2.594082] [drm] fb mappable at 0xD0142000
[    2.594084] [drm] vram apper at 0xD0000000
[    2.594086] [drm] size 5242880
[    2.594087] [drm] fb depth is 24
[    2.594089] [drm]    pitch is 5120
[    2.594128] fbcon: radeondrmfb (fb0) is primary device
[    2.642129] Console: switching to colour frame buffer device 156x60
[    2.675966] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[    2.675970] radeon 0000:01:05.0: registered panic notifier
[    2.676076] [drm] Initialized radeon 2.24.0 20080528 for 0000:01:05.0 on minor 0
[    2.695378] PM: Marking nosave pages: 000000000009b000 - 0000000000100000
[    2.695383] PM: Marking nosave pages: 00000000cfe90000 - 0000000100000000
[    2.695954] PM: Marking nosave pages: 00000000c4000000 - 00000000c8000000
[    2.696163] PM: Basic memory bitmaps created
[    2.696691] PM: Basic memory bitmaps freed
[    2.700366] usb 4-1: new low-speed USB device number 2 using ohci_hcd
[    2.706827] PM: Starting manual resume from disk
[    2.706835] PM: Hibernation image partition 8:2 present
[    2.706836] PM: Looking for hibernation image.
[    2.707028] PM: Image not found (code -22)
[    2.707031] PM: Hibernation image not present or could not be loaded.
[    2.867051] usb 4-1: New USB device found, idVendor=093a, idProduct=2510
[    2.867059] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.867062] usb 4-1: Product: USB Optical Mouse
[    2.867064] usb 4-1: Manufacturer: PixArt
[    2.875192] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input1
[    2.875267] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:12.1-1/input0
[    2.875283] usbcore: registered new interface driver usbhid
[    2.875286] usbhid: USB HID core driver
[    2.885073] kjournald starting.  Commit interval 15 seconds
[    2.885333] EXT3-fs (sda3): using internal journal
[    2.885344] EXT3-fs (sda3): mounted filesystem with ordered data mode
[    4.600846] udev: starting version 147
[    4.687286] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    4.687720] ACPI: resource piix4_smbus [io  0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
[    4.687777] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.689059] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    4.689146] ACPI: Power Button [PWRB]
[    4.689227] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    4.689296] ACPI: Power Button [PWRF]
[    4.743272] wmi: Mapper loaded
[    4.759720] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    4.759799] scsi 6:0:0:0: Attached scsi generic sg1 type 5
[    4.786906] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    4.786982] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.787036] r8169 0000:02:00.0: (unregistered net_device): region #1 not an MMIO resource, aborting
[    4.787088] r8169 0000:02:00.0: PCI INT A disabled
[    4.787174] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    4.787233] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    4.787290] r8169 0000:04:00.0: (unregistered net_device): region #1 not an MMIO resource, aborting
[    4.787346] r8169 0000:04:00.0: PCI INT A disabled
[    4.787433] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    4.787503] r8169 0000:05:02.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    4.787600] r8169 0000:05:02.0: (unregistered net_device): no PCI Express capability
[    4.787842] r8169 0000:05:02.0: eth0: RTL8169sb/8110sb at 0xffffc90011844c00, c4:12:f5:33:fa:0b, XID 10000000 IRQ 20
[    4.787898] r8169 0000:05:02.0: eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[    4.794053] rtc_cmos 00:02: RTC can wake from S4
[    4.794211] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    4.794290] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    4.857166] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    4.985575] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.990665] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    4.990725] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.990881] sr 6:0:0:0: Attached scsi CD-ROM sr0
[    5.055851] parport_pc 00:07: reported by Plug and Play ACPI
[    5.055957] parport0: PC-style at 0x378, irq 5 [PCSPP]
[    5.097125] Initializing USB Mass Storage driver...
[    5.097261] scsi8 : usb-storage 2-3:1.0
[    5.097374] usbcore: registered new interface driver usb-storage
[    5.097429] USB Mass Storage support registered.
[    5.189370] ppdev: user-space parallel port driver
[    5.388602] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.388663] ALSA hda_intel.c:2996 Using LPIB position fix
[    5.416151] ALSA hda_intel.c:1748 Enable sync_write for stable communication
[    5.459553] NET: Registered protocol family 10
[    5.517568] ALSA hda_auto_parser.c:318 autoconfig: line_outs=4 (0x24/0x25/0x26/0x27/0x0) type:line
[    5.517572] ALSA hda_auto_parser.c:322    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.517574] ALSA hda_auto_parser.c:326    hp_outs=1 (0x28/0x0/0x0/0x0/0x0)
[    5.517575] ALSA hda_auto_parser.c:327    mono: mono_out=0x0
[    5.517576] ALSA hda_auto_parser.c:330    dig-out=0x2d/0x0
[    5.517578] ALSA hda_auto_parser.c:331    inputs:
[    5.517579] ALSA hda_auto_parser.c:335      Front Mic=0x29
[    5.517581] ALSA hda_auto_parser.c:335      Rear Mic=0x2b
[    5.517582] ALSA hda_auto_parser.c:335      Line=0x2a
[    5.517583] ALSA hda_auto_parser.c:335      CD=0x2c
[    5.533362] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[    5.533475] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[    5.533564] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[    5.533653] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[    5.533743] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[    5.533832] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[    5.533921] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[    5.534011] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[    5.534221] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    5.534276] ALSA hda_intel.c:2996 Using LPIB position fix
[    5.534328] HDA Intel 0000:01:05.1: setting latency timer to 64
[    5.548092] ALSA hda_intel.c:1748 Enable sync_write for stable communication
[    5.580349] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input13
[    6.098222] scsi 8:0:0:0: Direct-Access     JetFlash Transcend 8GB    8.07 PQ: 0 ANSI: 4
[    6.098427] sd 8:0:0:0: Attached scsi generic sg2 type 0
[    6.101737] sd 8:0:0:0: [sdb] 15679488 512-byte logical blocks: (8.02 GB/7.47 GiB)
[    6.102848] sd 8:0:0:0: [sdb] Write Protect is off
[    6.102910] sd 8:0:0:0: [sdb] Mode Sense: 23 00 00 00
[    6.103973] sd 8:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    6.109102]  sdb: sdb4
[    6.112210] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[    6.373940] Adding 12587004k swap on /dev/sda2.  Priority:-1 extents:1 across:12587004k
[    7.245092] device-mapper: uevent: version 1.0.3
[    7.245225] device-mapper: ioctl: 4.25.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
[    7.984615] loop: module loaded
[    8.039392] kjournald starting.  Commit interval 15 seconds
[    8.039607] EXT3-fs (sda1): using internal journal
[    8.039668] EXT3-fs (sda1): mounted filesystem with ordered data mode
[    8.097645] kjournald starting.  Commit interval 15 seconds
[    8.097960] EXT3-fs (sda4): using internal journal
[    8.098019] EXT3-fs (sda4): mounted filesystem with ordered data mode
[    9.474303] fuse init (API version 7.16)
[   12.468537] type=1400 audit(1484209411.468:2): apparmor="STATUS" operation="profile_load" name="/bin/ping" pid=1348 comm="apparmor_parser"
[   12.488503] type=1400 audit(1484209411.488:3): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=1353 comm="apparmor_parser"
[   12.531842] type=1400 audit(1484209411.528:4): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=1357 comm="apparmor_parser"
[   12.574169] type=1400 audit(1484209411.572:5): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=1361 comm="apparmor_parser"
[   12.609055] type=1400 audit(1484209411.608:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/PolicyKit/polkit-explicit-grant-helper" pid=1366 comm="apparmor_parser"
[   12.652430] type=1400 audit(1484209411.652:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/PolicyKit/polkit-grant-helper" pid=1370 comm="apparmor_parser"
[   12.691939] type=1400 audit(1484209411.688:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/PolicyKit/polkit-grant-helper-pam" pid=1374 comm="apparmor_parser"
[   12.735352] type=1400 audit(1484209411.732:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/PolicyKit/polkit-read-auth-helper" pid=1378 comm="apparmor_parser"
[   12.751345] type=1400 audit(1484209411.748:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/PolicyKit/polkit-resolve-exe-helper" pid=1382 comm="apparmor_parser"
[   12.773071] type=1400 audit(1484209411.772:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/PolicyKit/polkit-revoke-helper" pid=1386 comm="apparmor_parser"
[   16.335991] microcode: CPU0: patch_level=0x010000c7
[   16.475697] microcode: CPU1: patch_level=0x010000c7
[   16.476105] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   17.025008] powernow-k8: Found 1 AMD Athlon(tm) II X2 245 Processor (2 cpu cores) (version 2.20.00)
[   17.025044] powernow-k8:    0 : pstate 0 (2900 MHz)
[   17.025046] powernow-k8:    1 : pstate 1 (2200 MHz)
[   17.025047] powernow-k8:    2 : pstate 2 (1700 MHz)
[   17.025049] powernow-k8:    3 : pstate 3 (800 MHz)
[   19.172722] r8169 0000:05:02.0: eth0: link down
[   19.172735] r8169 0000:05:02.0: eth0: link down
[   19.173666] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.040446] r8169 0000:05:02.0: eth0: link up
[   22.043355] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   26.376537] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
[   27.486280] MCE: In-kernel MCE decoding enabled.
[   32.524039] eth0: no IPv6 routers present
[   32.755593] bootsplash: status on console 0 changed to on
[   41.301123] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   78.658242] start_kdeinit (3893): /proc/3893/oom_adj is deprecated, please use /proc/3893/oom_score_adj instead.
[ 1231.266485] ip6_tables: © 2000-2006 Netfilter Core Team
[ 1234.352345] ip_tables: © 2000-2006 Netfilter Core Team


lsmod

Код: Выделить всё

server-1:~ # lsmod
Module                  Size  Used by
iptable_filter         12810  0
ip_tables              27464  1 iptable_filter
ip6table_filter        12815  0
ip6_tables             27610  1 ip6table_filter
x_tables               35132  4 iptable_filter,ip_tables,ip6table_filter,ip6_tables
nls_iso8859_1          12713  1
nls_cp437              16991  1
vfat                   17535  1
fat                    65370  1 vfat
edac_mce_amd           22695  0
snd_pcm_oss            62203  0
snd_mixer_oss          22423  1 snd_pcm_oss
snd_seq                69884  0
snd_seq_device         14490  1 snd_seq
edd                    14544  0
cpufreq_conservative    13863  0
cpufreq_userspace      13162  0
cpufreq_powersave      12618  0
powernow_k8            29554  0
mperf                  12667  1 powernow_k8
microcode             121660  0
fuse                   96827  3
loop                   23528  0
dm_mod                 96140  0
snd_hda_codec_hdmi     40668  1
snd_hda_codec_via      51129  1
ipv6                   12758  1
ipv6_lib              345387  35 ipv6
snd_hda_intel          42142  5
snd_hda_codec         142489  3 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel
snd_hwdep              13602  1 snd_hda_codec
snd_pcm               108887  5 snd_pcm_oss,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_timer              29800  2 snd_seq,snd_pcm
snd                    87695  20 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
usb_storage            57618  1
ppdev                  17750  0
parport_pc             45587  0
shpchp                 37182  0
sr_mod                 22353  0
parport                46463  2 ppdev,parport_pc
soundcore              14996  1 snd
cdrom                  47069  1 sr_mod
pcspkr                 12702  0
k10temp                13119  0
snd_page_alloc         18710  2 snd_hda_intel,snd_pcm
rtc_cmos               18547  0
r8169                  66771  0
serio_raw              13208  0
sg                     36648  0
wmi                    19141  0
button                 13907  0
i2c_piix4              18199  0
pci_hotplug            35334  1 shpchp
mii                    13934  1 r8169
ext3                  156373  3
jbd                    75657  1 ext3
mbcache                14806  1 ext3
usbhid                 52686  0
hid                    99797  1 usbhid
radeon                968473  2
ttm                    91554  1 radeon
drm_kms_helper         48930  1 radeon
drm                   295321  4 radeon,ttm,drm_kms_helper
i2c_algo_bit           13509  1 radeon
i2c_core               35840  5 i2c_piix4,radeon,drm_kms_helper,drm,i2c_algo_bit
ohci_hcd               37284  0
sd_mod                 49467  7
crc_t10dif             12563  1 sd_mod
processor              44454  1 powernow_k8
thermal_sys            24622  1 processor
hwmon                  13080  3 k10temp,radeon,thermal_sys
ehci_hcd               65431  0
usbcore               234555  5 usb_storage,usbhid,ohci_hcd,ehci_hcd
usb_common             12581  1 usbcore
scsi_dh_rdac           17401  0
scsi_dh_alua           21566  0
scsi_dh_emc            17247  0
scsi_dh_hp_sw          12841  0
scsi_dh                14784  4 scsi_dh_rdac,scsi_dh_alua,scsi_dh_emc,scsi_dh_hp_sw
ata_generic            12899  0
pata_atiixp            13157  0
ahci                   25903  4
libahci                35044  1 ahci
libata                234722  4 ata_generic,pata_atiixp,ahci,libahci
scsi_mod              240708  10 usb_storage,sr_mod,sg,sd_mod,scsi_dh_rdac,scsi_dh_alua,scsi_dh_emc,scsi_dh_hp_sw,scsi_dh,libata
server-1:~ #

3.jpg
Спасибо сказали:
tjoma
Сообщения: 108

Re: Необходима помощь

Сообщение tjoma »


SLES 11SP4 не видит сетевую карту. D-Link DGE-560T

Добрый день!

Исходные данные: Железо — 785GM-P45.

Сетеви карты D-Link DGE-560T 2 шт., D-Link DGE-530T 1 шт.
Дистрибутив: SLES 11SP4.

Версия ядра (выдал по uname -a): Linux server-1 3.0.101-91-default #1 SMP Mon Dec 12 13:06:13 UTC 2016 (544b9d1) x86_64 x86_64 x86_64 GNU/Linux

Все установку произвожу с настройками по умолчанию.

На этапе установки не находит сетеви карты D-Link DGE-560T 2 шт, AR8131 (стандартная) и находит D-Link DGE-530T как D-Link DGE-528T (настораживает!). После установки смотрю через Yast\Информация по аппаратным средствам\

1) Сетевая плата: D-Link DGE-560T не настроено
2) Сетевая плата: D-Link DGE-560T не настроено
3) Сетевая плата: D-Link DGE-528T настроено имя модуля r8169
4) 1) Сетевая плата: AR8131 не настроено


Да драйвера нужные по умолчанию не устанавливаются, пробовал с оф. сайта не подходят. Помогите с чего начинать?..только не говорите что с себя..
Спасибо сказали:
Аватара пользователя
Goodvin
Ведущий рубрики
Сообщения: 4333
Статус: ⚝⚠⚒⚑⚖☭☞☣☤&

Re: Необходима помощь

Сообщение Goodvin »

Вот этот кусок
[ 4.786906] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.786982] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.787036] r8169 0000:02:00.0: (unregistered net_device): region #1 not an MMIO resource, aborting
[ 4.787088] r8169 0000:02:00.0: PCI INT A disabled
[ 4.787174] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.787233] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.787290] r8169 0000:04:00.0: (unregistered net_device): region #1 not an MMIO resource, aborting
[ 4.787346] r8169 0000:04:00.0: PCI INT A disabled
[ 4.787433] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.787503] r8169 0000:05:02.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4.787600] r8169 0000:05:02.0: (unregistered net_device): no PCI Express capability
[ 4.787842] r8169 0000:05:02.0: eth0: RTL8169sb/8110sb at 0xffffc90011844c00, c4:12:f5:33:fa:0b, XID 10000000 IRQ 20
[ 4.787898] r8169 0000:05:02.0: eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]

говорит нам, что для трех сетевых карт загрузился модуль ядра r8169, но заработал только для одной, последней.

Как варианта, на двух картах модели D-Link DGE-560T установлен другой чип, не RTL816Х
Китайский D-Link издавна славится такими фокусами:
у сетевой карты одной модели могут быть партии с разными чипами на борту, или даже полностью разные по разводке и внешнему виду устройства.
В лучшем случае их обозначат разными ревизиями, а то и никак по названию/упаковке не отличить, пока визуально платы не сравнишь.
Сам с таким сталкивался неоднократно.
Плюс совершенная путаница и зоопарк с firmware на этих платах.

Что и с каким драйвером заработает - сущая лотерея.
Многие в такую лотерею играть за свои деньги не хотят.

Если хотите выяснять и заставить работать на этом зоопарке - начать надо с выяснения модели чипа, на которых эти сетевые карты построены.
От него дальше и плясать.

Спасибо сказали:
tjoma
Сообщения: 108

Re: Необходима помощь

Сообщение tjoma »

вы не могли сказать какую-то модель которая будет работать на SLES
Спасибо сказали:
Аватара пользователя
Goodvin
Ведущий рубрики
Сообщения: 4333
Статус: ⚝⚠⚒⚑⚖☭☞☣☤&

Re: Необходима помощь

Сообщение Goodvin »

tjoma писал(а):
24.02.2017 10:27
вы не могли сказать какую-то модель которая будет работать на SLES


Обычно Intel как следует сертифицирует свои устройства на таких дистрибутивах.
Точную модель не скажу - много их.

А вообще Вам сюда:
https://www.suse.com/yessearch/
Спасибо сказали:
Аватара пользователя
Stauffenberg
Сообщения: 2042
Статус: ☮ PEACE ☮
ОС: открытая и свободная

Re: Необходима помощь

Сообщение Stauffenberg »

Goodvin писал(а):
10.01.2017 14:47
tjoma писал(а):
10.01.2017 09:33
Bizdelnick писал(а):
07.01.2017 13:53
У SLES есть официальная техподдержка, почему бы не задать вопрос ей?

Обращался пока нет никакого ответа

Что, и в чате не отвечают?
И на телефонные звонки не отвечают?

Странно.



Bizdelnick писал(а):
10.01.2017 12:38
Как это — нет ответа? По регламенту должны отвечать не позднее следующего рабочего дня.

Только для тех, кто покупает поддержку. ТС ни слова не написал о том, что у него есть поддержка, а скачать iso SLES и попытаться установить его может любой Иван.
Labor omnia vincit

"Debugging is twice as hard as writing the code in the first place.
Therefore, if you write the code as cleverly as possible, you are, by definition, not smart enough to debug it.” (Brian Kernighan)
Спасибо сказали:
Аватара пользователя
Bizdelnick
Модератор
Сообщения: 20752
Статус: nulla salus bello
ОС: Debian GNU/Linux

Re: Необходима помощь

Сообщение Bizdelnick »

Stauffenberg писал(а):
02.03.2017 19:50
скачать iso SLES и попытаться установить его может любой Иван.

Не любой, а только дурак. ☺
Пишите правильно:
в консоли
вку́пе (с чем-либо)
в общем
вообще
в течение (часа)
новичок
нюанс
по умолчанию
приемлемо
проблема
пробовать
трафик
Спасибо сказали:
Аватара пользователя
Goodvin
Ведущий рубрики
Сообщения: 4333
Статус: ⚝⚠⚒⚑⚖☭☞☣☤&

Re: Необходима помощь

Сообщение Goodvin »

Stauffenberg писал(а):
02.03.2017 19:50
Только для тех, кто покупает поддержку. ТС ни слова не написал о том, что у него есть поддержка, а скачать iso SLES и попытаться установить его может любой Иван.


Технически да, может любой
Но как подсказывает здравый смысл, если это тестовая инсталляция перед покупкой, то это должен делать человек, понимающий что происходит, зачем ему именно SLE и где/как искать ответ.
Как минимум, знать о существовании HCL и посмотреть в него ДО начала экспериментов.

Либо это продуктив, требующий именно SLE, и тогда крайне потребна купленная поддержка, иначе ССЗБ.

Ну и товарищ пишет, что обращался в официальную поддержку.
Разве можно туда обратиться, не имея оплаченного доступа?
Спасибо сказали:
Ответить