Здравствуйте уважаемые форумчане.
У меня такая же проблема, но МФУ SCX-4300. Установлены все, что связано с SANE:
Код: Выделить всё
[dushanov@localhost ~]$ rpm -qa | grep sane
sane-backends-drivers-cameras-1.0.24-7.fc20.x86_64
python-pillow-sane-2.2.1-5.fc20.x86_64
xsane-gimp-0.999-12.fc20.x86_64
libsane-hpaio-3.14.6-5.fc20.x86_64
sane-backends-drivers-scanners-1.0.24-7.fc20.x86_64
xsane-0.999-12.fc20.x86_64
sane-backends-devel-1.0.24-7.fc20.x86_64
mingw64-sane-backends-1.0.24-1.fc20.noarch
sane-backends-1.0.24-7.fc20.x86_64
mingw64-sane-backends-static-1.0.24-1.fc20.noarch
python3-pillow-sane-2.2.1-5.fc20.x86_64
xsane-common-0.999-12.fc20.x86_64
sane-backends-libs-1.0.24-7.fc20.x86_64
sane-frontends-1.0.14-18.fc20.x86_64
Данные МФУ присутствуют в файле xerox_mpf.conf:
В процессе поиска решения была создана группа scanner. Вот некоторые мои действия:
Код: Выделить всё
[dushanov@localhost ~]$ scanimage -L
device `xerox_mfp:libusb:003:002' is a SAMSUNG ORION multi-function peripheral
dushanov@localhost ~]$ sane-find-scanner
found USB scanner (vendor=0x04e8 [Samsung], product=0x342e [SCX-4300 Series]) at libusb:003:003
[dushanov@localhost ~]$ ls -l /dev/bus/usb/003/003
crw-rw-r--+ 1 root lp 189, 258 окт 16 14:39 /dev/bus/usb/003/003
[root@localhost ~]# usermod -a -G scanner dushanov
[root@localhost ~]# usermod -a -G lp dushanov
[root@localhost ~]# chgrp scanner /dev/sg0
[root@localhost ~]# chmod 660 /dev/sg0
[dushanov@localhost ~]$ groups
dushanov lp bumblebee scanner
В итоге всегда имею
Код: Выделить всё
[dushanov@localhost ~]$ scanimage > test.pnm
scanimage: no SANE devices found
(Также при первом запуске xsane получаю сообщение об ошибке ввода-вывода, во втором --- no SANE devices found).
Далее
Код: Выделить всё
[dushanov@localhost ~]$ scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
Переподкючение USB3 - USB2 не помогает, после первого неудачного запуска xsane опять все повторяется. Принтер работает исправно. Комьютер: ASUS X550V, ОС: Fedora 20 (3.16.4-200.fc20.x86_64)
Как запустить мой сканер?