Проблемы с HP P1102

Всё о принтерах, сканерах и многофункциональных устройствах. Подключение, настройка, проблемы.

Модератор: Модераторы разделов

Ответить
kryuch
Сообщения: 44
ОС: openSUSE 10.0

Проблемы с HP P1102

Сообщение kryuch »

Операционная система openSUSE 11.4 (на 12.1 тоже самое)

не видится ни ястом, ни hp-setip. Ставил hplib с сайта - толку чуть.
Наколько я понял проблема в том, что принтер почему-то видится как CD-ROM. Нашел в гугле что есть такая проблема, но внятного ответа как победить (кроме как через винду) не нашел. Можете что нибудь посоветовать? И вообще, что за деградация, HP в SUSE еще в 2007 двумя тыками мышки настраивался, без всякого качания чего-нибудь из инета.

lsusb

Код: Выделить всё

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 006: ID 03f0:002a Hewlett-Packard LaserJet P1102
Bus 001 Device 003: ID 1005:b113 Apacer Technology, Inc. Handy Steno 2.0/HT203
Bus 001 Device 004: ID 152d:2338 JMicron Technology Corp. / JMicron USA Technology Corp. JM20337 Hi-Speed USB to SATA & PATA Combo Bridge


lsusb -v

Код: Выделить всё

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.37.1-1.2-desktop ehci_hcd
  iProduct                2 EHCI Host Controller
  iSerial                 1 0000:00:1d.7
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength              11
  bDescriptorType      41
  nNbrPorts             8
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00 0x00
  PortPwrCtrlMask    0xff 0xff
 Hub Port Status:
   Port 1: 0000.0503 highspeed power enable connect
   Port 2: 0000.0503 highspeed power enable connect
   Port 3: 0000.0100 power
   Port 4: 0000.0503 highspeed power enable connect
   Port 5: 0000.0100 power
   Port 6: 0000.0100 power
   Port 7: 0000.0100 power
   Port 8: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.37.1-1.2-desktop uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:1d.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.37.1-1.2-desktop uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:1d.1
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.37.1-1.2-desktop uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:1d.2
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.37.1-1.2-desktop uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:1d.3
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 001 Device 006: ID 03f0:002a Hewlett-Packard LaserJet P1102
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x03f0 Hewlett-Packard
  idProduct          0x002a LaserJet P1102
  bcdDevice            1.00
  iManufacturer           1 Hewlett-Packard
  iProduct                2 HP LaserJet Professional P1102
  iSerial                 3 000000000Q83EMK8SI1c
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xc0
      Self Powered
    MaxPower               98mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk (Zip)
      iInterface              5 HP MS
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0001
  Self Powered

Bus 001 Device 003: ID 1005:b113 Apacer Technology, Inc. Handy Steno 2.0/HT203
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x1005 Apacer Technology, Inc.
  idProduct          0xb113 Handy Steno 2.0/HT203
  bcdDevice            0.00
  iManufacturer           1 USB
  iProduct                2 FLASH DRIVE
  iSerial                 3 000FF1103192029310316123
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk (Zip)
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)

Bus 001 Device 004: ID 152d:2338 JMicron Technology Corp. / JMicron USA Technology Corp. JM20337 Hi-Speed USB to SATA & PATA Combo Bridge
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x152d JMicron Technology Corp. / JMicron USA Technology Corp.
  idProduct          0x2338 JM20337 Hi-Speed USB to SATA & PATA Combo Bridge
  bcdDevice            1.00
  iManufacturer           1 JMicron
  iProduct                2 USB to ATA/ATAPI bridge
  iSerial                 5 581230080282
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          4 USB Mass Storage
    bmAttributes         0xc0
      Self Powered
    MaxPower                2mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk (Zip)
      iInterface              6 MSC Bulk-Only Transfer
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0001
  Self Powered


dgmes

Код: Выделить всё

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.37.1-1.2-desktop (geeko@buildhost) (gcc version 4.5.1 20101208 [gcc-4_5-branch revision 167585] (SUSE Linux) ) #1 SMP PREEMPT 2011-02-21 10:34:10 +0100
[    0.000000] Atom PSE erratum detected, BIOS microcode update recommended
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000100 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001f680000 (usable)
[    0.000000]  BIOS-e820: 000000001f680000 - 000000001f700000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001f700000 - 0000000020000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: Intel Corporation Calistoga & ICH7M Chipset/CAPELL VALLEY(NAPA) CRB, BIOS NAPA0001.86C.0059.D.0905252004 05/25/09
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x1f680 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 0E0000000 write-back
[    0.000000]   1 base 01F700000 mask 0FFF00000 uncachable
[    0.000000]   2 base 01F800000 mask 0FF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
[    0.000000] found SMP MP-table at [c00f7380] f7380
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] initial memory mapped : 0 - 01000000
[    0.000000] init_memory_mapping: 0000000000000000-000000001f680000
[    0.000000]  0000000000 - 001f680000 page 4k
[    0.000000] kernel direct mapping tables up to 1f680000 @ efc000-1000000
[    0.000000] RAMDISK: 1ec2d000 - 1f674000
[    0.000000] ACPI: RSDP 000f7350 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 1f688e63 0007C (v01 PTLTD  ? XSDT   06040000  LTP 00000000)
[    0.000000] ACPI: FACP 1f68fda0 000F4 (v03 INTEL  CALISTGA 06040000 ALAN 00000001)
[    0.000000] ACPI: DSDT 1f68ac8b 050A1 (v02 INTEL  CALISTGA 06040000 INTL 20050624)
[    0.000000] ACPI: FACS 1f690fc0 00040
[    0.000000] ACPI: APIC 1f68fe94 00068 (v01 INTEL  CALISTGA 06040000 LOHR 0000005A)
[    0.000000] ACPI: HPET 1f68fefc 00038 (v01 INTEL  CALISTGA 06040000 LOHR 0000005A)
[    0.000000] ACPI: MCFG 1f68ff34 0003C (v01 INTEL  CALISTGA 06040000 LOHR 0000005A)
[    0.000000] ACPI: APIC 1f68ff70 00068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 1f68ffd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SSDT 1f68a63c 0064F (v01 SataRe  SataPri 00001000 INTL 20050624)
[    0.000000] ACPI: SSDT 1f689faa 00692 (v01 SataRe  SataSec 00001000 INTL 20050624)
[    0.000000] ACPI: SSDT 1f689421 0021F (v02  PmRef  Cpu0Tst 00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 1f6893bb 00066 (v02  PmRef  Cpu1Tst 00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 1f688edf 004DC (v02  PmRef    CpuPm 00003000 INTL 20050624)
[    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] could not find any ACPI SRAT memory areas.
[    0.000000] failed to get NUMA memory information from SRAT table
[    0.000000] NUMA - single node, flat memory mode
[    0.000000] Node: 0, start_pfn: 0, end_pfn: 1f680
[    0.000000]   Setting physnode_map array to node 0 for pfns:
[    0.000000]   0 4000 8000 c000 10000 14000 18000 1c000
[    0.000000] node 0 pfn: [0 - 1f680]
[    0.000000] Reserving 1024 pages of KVA for lmem_map of node 0 at 1e800
[    0.000000] Reserving total of 400 pages for numa KVA remap
[    0.000000] kva_start_pfn ~ 1e400 max_low_pfn ~ 1f680
[    0.000000] max_pfn = 1f680
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 502MB LOWMEM available.
[    0.000000] max_low_pfn = 1f680, highstart_pfn = 1f680
[    0.000000] Low memory ends at vaddr df680000
[    0.000000] node 0 will remap to vaddr de400000 - de800000
[    0.000000] allocate_pgdat: node 0 NODE_DATA de400000
[    0.000000] remap_numa_kva: node 0
[    0.000000] remap_numa_kva: de400000 to pfn 0001e800
[    0.000000] remap_numa_kva: de600000 to pfn 0001ea00
[    0.000000] High memory starts at vaddr df680000
[    0.000000]   mapped low ram: 0 - 1f680000
[    0.000000]   low ram: 0 - 1f680000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0001f680
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0001f680
[    0.000000] On node 0 totalpages: 128527
[    0.000000] free_area_init_node: node 0, pgdat de400000, node_mem_map de402200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 973 pages used for memmap
[    0.000000]   Normal zone: 123571 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:c0000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:8
[    0.000000] PERCPU: Embedded 12 pages/cpu @dec15000 s28160 r0 d20992 u49152
[    0.000000] pcpu-alloc: s28160 r0 d20992 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 127522
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/disk/by-id/usb-SAMSUNG_SP0802N_581230080282-0:0-part8 resume=/dev/disk/by-id/usb-SAMSUNG_SP0802N_581230080282-0:0-part5 splash=silent quiet showopts vga=0x314
[    0.000000] bootsplash: silent mode.
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 2572480 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 481656k/514560k available (4699k kernel code, 32452k reserved, 3490k data, 452k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xff5b4000 - 0xfffff000   (10540 kB)
[    0.000000]     pkmap   : 0xff200000 - 0xff400000   (2048 kB)
[    0.000000]     vmalloc : 0xdfe80000 - 0xff1fe000   ( 499 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf680000   ( 502 MB)
[    0.000000]       .init : 0xc0a00000 - 0xc0a71000   ( 452 kB)
[    0.000000]       .data : 0xc0696c5d - 0xc09ff508   (3490 kB)
[    0.000000]       .text : 0xc0200000 - 0xc0696c5d   (4699 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Preemptable hierarchical RCU implementation.
[    0.000000]  RCU-based detection of stalled CPUs is disabled.
[    0.000000]  Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:8448 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=ddc0c000 soft=ddc0e000
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1596.168 MHz processor.
[    0.002013] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.33 BogoMIPS (lpj=1596168)
[    0.002033] pid_max: default: 32768 minimum: 301
[    0.002301] Security Framework initialized
[    0.002338] AppArmor: AppArmor initialized
[    0.003272] Mount-cache hash table entries: 512
[    0.003719] Initializing cgroup subsys ns
[    0.003732] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.003745] Initializing cgroup subsys cpuacct
[    0.003762] Initializing cgroup subsys memory
[    0.003810] Initializing cgroup subsys devices
[    0.003821] Initializing cgroup subsys freezer
[    0.003831] Initializing cgroup subsys net_cls
[    0.003840] Initializing cgroup subsys blkio
[    0.003971] Atom PSE erratum detected, BIOS microcode update recommended
[    0.004018] CPU: Physical Processor ID: 0
[    0.004026] CPU: Processor Core ID: 0
[    0.004035] mce: CPU supports 5 MCE banks
[    0.004057] CPU0: Thermal LVT vector (0xfa) already installed
[    0.004069] using mwait in idle threads.
[    0.004092] Performance Events: PEBS fmt0+, Atom events, Broken PMU hardware detected, software events only.
[    0.005263] ACPI: Core revision 20101013
[    0.032243] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.032471] Mapping cpu 0 to node 0
[    0.032719] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.042741] CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
[    0.047044] NMI watchdog disabled for cpu0: unable to create perf event: -2
[    0.050101] CPU 1 irqstacks, hard=ddc9e000 soft=ddca0000
[    0.050125] Booting Node   0, Processors  #1 Ok.
[    0.002999] Initializing CPU#1
[    0.002999] Mapping cpu 1 to node 0
[    0.002999] Atom PSE erratum detected, BIOS microcode update recommended
[    0.002999] CPU1: Thermal LVT vector (0xfa) already installed
[    0.122074] NMI watchdog disabled for cpu1: unable to create perf event: -2
[    0.122109] Brought up 2 CPUs
[    0.122120] Total of 2 processors activated (6384.18 BogoMIPS).
[    0.123197] devtmpfs: initialized
[    0.124703] regulator: core version 0.5
[    0.124941] regulator: dummy:
[    0.124985] Time:  1:02:00  Date: 11/26/12
[    0.125271] NET: Registered protocol family 16
[    0.126394] ACPI: bus type pci registered
[    0.126758] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.126775] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.126784] PCI: Using MMCONFIG for extended config space
[    0.126793] PCI: Using configuration type 1 for base access
[    0.132496] bio: create slab <bio-0> at 0
[    0.138243] ACPI: EC: Look up EC in DSDT
[    0.151258] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.154909] ACPI: SSDT 1f689caa 00238 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.156302] ACPI: Dynamic OEM Table Load:
[    0.156319] ACPI: SSDT   (null) 00238 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.157614] ACPI: SSDT 1f689640 005E5 (v02  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.158850] ACPI: Dynamic OEM Table Load:
[    0.158865] ACPI: SSDT   (null) 005E5 (v02  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.160838] ACPI: SSDT 1f689ee2 000C8 (v02  PmRef  Cpu1Ist 00003000 INTL 20050624)
[    0.162173] ACPI: Dynamic OEM Table Load:
[    0.162189] ACPI: SSDT   (null) 000C8 (v02  PmRef  Cpu1Ist 00003000 INTL 20050624)
[    0.162929] ACPI: SSDT 1f689c25 00085 (v02  PmRef  Cpu1Cst 00003000 INTL 20050624)
[    0.164181] ACPI: Dynamic OEM Table Load:
[    0.164197] ACPI: SSDT   (null) 00085 (v02  PmRef  Cpu1Cst 00003000 INTL 20050624)
[    0.165792] ACPI: Interpreter enabled
[    0.165816] ACPI: (supports S0 S3 S4 S5)
[    0.165939] ACPI: Using IOAPIC for interrupt routing
[    0.175548] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[    0.194280] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[    0.197245] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[    0.197782] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[    0.199892] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[    0.206393] ACPI: No dock devices found.
[    0.206413] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.209196] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.214648] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.214665] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.214679] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.214692] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[    0.214705] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    0.214717] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    0.214730] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[    0.214744] pci_root PNP0A08:00: host bridge window [mem 0x20000000-0xfebfffff]
[    0.214807] pci 0000:00:00.0: [8086:27ac] type 0 class 0x000600
[    0.214931] pci 0000:00:02.0: [8086:27ae] type 0 class 0x000300
[    0.214964] pci 0000:00:02.0: reg 10: [mem 0xd0100000-0xd017ffff]
[    0.214984] pci 0000:00:02.0: reg 14: [io  0x1800-0x1807]
[    0.215019] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
[    0.215039] pci 0000:00:02.0: reg 1c: [mem 0xd0200000-0xd023ffff]
[    0.215129] pci 0000:00:02.1: [8086:27a6] type 0 class 0x000380
[    0.215156] pci 0000:00:02.1: reg 10: [mem 0xd0180000-0xd01fffff]
[    0.215338] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[    0.215383] pci 0000:00:1b.0: reg 10: [mem 0xd0440000-0xd0443fff 64bit]
[    0.215513] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.215529] pci 0000:00:1b.0: PME# disabled
[    0.215589] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[    0.215720] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.215735] pci 0000:00:1c.0: PME# disabled
[    0.215814] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[    0.215911] pci 0000:00:1d.0: reg 20: [io  0x1820-0x183f]
[    0.215994] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[    0.216090] pci 0000:00:1d.1: reg 20: [io  0x1840-0x185f]
[    0.216178] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[    0.216267] pci 0000:00:1d.2: reg 20: [io  0x1860-0x187f]
[    0.216347] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[    0.216435] pci 0000:00:1d.3: reg 20: [io  0x1880-0x189f]
[    0.216536] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[    0.216581] pci 0000:00:1d.7: reg 10: [mem 0xd0444000-0xd04443ff]
[    0.216717] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.216732] pci 0000:00:1d.7: PME# disabled
[    0.216784] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.216937] pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
[    0.217104] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.217122] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
[    0.217137] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[    0.217152] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 02e8 (mask 001f)
[    0.217167] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 03e0 (mask 003f)
[    0.217181] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0294 (mask 0003)
[    0.217257] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
[    0.217291] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.217316] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.217342] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
[    0.217367] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
[    0.217392] pci 0000:00:1f.1: reg 20: [io  0x1810-0x181f]
[    0.217487] pci 0000:00:1f.2: [8086:27c4] type 0 class 0x000101
[    0.217527] pci 0000:00:1f.2: reg 10: [io  0x18d0-0x18d7]
[    0.217552] pci 0000:00:1f.2: reg 14: [io  0x18c4-0x18c7]
[    0.217577] pci 0000:00:1f.2: reg 18: [io  0x18c8-0x18cf]
[    0.217602] pci 0000:00:1f.2: reg 1c: [io  0x18c0-0x18c3]
[    0.217627] pci 0000:00:1f.2: reg 20: [io  0x18b0-0x18bf]
[    0.217653] pci 0000:00:1f.2: reg 24: [mem 0xd0444400-0xd04447ff]
[    0.217713] pci 0000:00:1f.2: PME# supported from D3hot
[    0.217728] pci 0000:00:1f.2: PME# disabled
[    0.217771] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[    0.217872] pci 0000:00:1f.3: reg 20: [io  0x18e0-0x18ff]
[    0.218056] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.218073] pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.218090] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.218111] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.218213] pci 0000:03:02.0: [10ec:8139] type 0 class 0x000200
[    0.218253] pci 0000:03:02.0: reg 10: [io  0x2000-0x20ff]
[    0.218280] pci 0000:03:02.0: reg 14: [mem 0xd0000000-0xd00000ff]
[    0.218362] pci 0000:03:02.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[    0.218407] pci 0000:03:02.0: supports D1 D2
[    0.218418] pci 0000:03:02.0: PME# supported from D1 D2 D3hot D3cold
[    0.218433] pci 0000:03:02.0: PME# disabled
[    0.218482] pci 0000:03:03.0: [10ec:8167] type 0 class 0x000200
[    0.218521] pci 0000:03:03.0: reg 10: [io  0x2400-0x24ff]
[    0.218548] pci 0000:03:03.0: reg 14: [mem 0xd0000400-0xd00004ff]
[    0.218629] pci 0000:03:03.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.218673] pci 0000:03:03.0: supports D1 D2
[    0.218684] pci 0000:03:03.0: PME# supported from D1 D2 D3hot D3cold
[    0.218699] pci 0000:03:03.0: PME# disabled
[    0.218781] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[    0.218797] pci 0000:00:1e.0:   bridge window [io  0x2000-0x2fff]
[    0.218815] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xd00fffff]
[    0.218841] pci 0000:00:1e.0:   bridge window [mem 0x20000000-0x200fffff 64bit pref]
[    0.218856] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.218870] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.218883] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.218897] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.218911] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.218925] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.218939] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.218953] pci 0000:00:1e.0:   bridge window [mem 0x20000000-0xfebfffff] (subtractive decode)
[    0.219014] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.220039] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.220601] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.259586] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.259992] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.260391] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.260773] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.261192] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.261576] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.261975] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.262375] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.262544] HEST: Table is not found!
[    0.263686] SCSI subsystem initialized
[    0.264133] libata version 3.00 loaded.
[    0.264326] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.264371] vgaarb: loaded
[    0.264531] usbcore: registered new interface driver usbfs
[    0.264634] usbcore: registered new interface driver hub
[    0.264685] usbcore: registered new device driver usb
[    0.265203] PCI: Using ACPI for IRQ routing
[    0.265203] PCI: pci_cache_line_size set to 64 bytes
[    0.265330] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[    0.265344] reserve RAM buffer: 000000001f680000 - 000000001fffffff
[    0.266120] NetLabel: Initializing
[    0.266130] NetLabel:  domain hash size = 128
[    0.266138] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.266189] NetLabel:  unlabeled traffic allowed by default
[    0.266208] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.266227] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.266248] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.270062] Switching to clocksource tsc
[    0.275914] AppArmor: AppArmor Filesystem Enabled
[    0.275971] pnp: PnP ACPI init
[    0.276085] ACPI: bus type pnp registered
[    0.278891] pnp 00:00: [bus 00-ff]
[    0.278908] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.278920] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.278932] pnp 00:00: [io  0x0d00-0xffff window]
[    0.278945] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.278957] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.278969] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.278981] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.278993] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.279006] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.279018] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.279030] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.279042] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.279054] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.279067] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.279079] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.279091] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.279103] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.279116] pnp 00:00: [mem 0x20000000-0xfebfffff window]
[    0.279128] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.279414] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.279612] pnp 00:01: [mem 0xe0000000-0xefffffff]
[    0.279626] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[    0.279648] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[    0.279659] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[    0.279671] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[    0.279682] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[    0.279715] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[    0.279726] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[    0.279977] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.281426] pnp 00:02: [io  0x0000-0x001f]
[    0.281440] pnp 00:02: [io  0x0081-0x0091]
[    0.281451] pnp 00:02: [io  0x0093-0x009f]
[    0.281462] pnp 00:02: [io  0x00c0-0x00df]
[    0.281474] pnp 00:02: [dma 4]
[    0.281717] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.281789] pnp 00:03: [mem 0xff000000-0xffffffff]
[    0.282013] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[    0.282529] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    0.282824] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.282921] pnp 00:05: [io  0x00f0]
[    0.282957] pnp 00:05: [irq 13]
[    0.283188] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.283271] pnp 00:06: [io  0x002e-0x002f]
[    0.283283] pnp 00:06: [io  0x0061]
[    0.283293] pnp 00:06: [io  0x0063]
[    0.283302] pnp 00:06: [io  0x0065]
[    0.283312] pnp 00:06: [io  0x0067]
[    0.283322] pnp 00:06: [io  0x0070]
[    0.283332] pnp 00:06: [io  0x0080]
[    0.283341] pnp 00:06: [io  0x0092]
[    0.283352] pnp 00:06: [io  0x00b2-0x00b3]
[    0.283362] pnp 00:06: [io  0x0680-0x069f]
[    0.283373] pnp 00:06: [io  0x0800-0x080f]
[    0.283384] pnp 00:06: [io  0x1000-0x107f]
[    0.283394] pnp 00:06: [io  0x1180-0x11bf]
[    0.283404] pnp 00:06: [io  0x1640-0x164f]
[    0.283771] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.283993] pnp 00:07: [io  0x06a0-0x06af]
[    0.284006] pnp 00:07: [io  0x06b0-0x06ff]
[    0.284281] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.284354] pnp 00:08: [io  0x0070-0x0077]
[    0.284382] pnp 00:08: [irq 8]
[    0.284619] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.286120] pnp 00:09: [io  0x03f8-0x03ff]
[    0.286136] pnp 00:09: IRQ 4 override to edge, high
[    0.286161] pnp 00:09: [irq 4]
[    0.286457] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.288026] pnp 00:0a: [io  0x02f8-0x02ff]
[    0.288042] pnp 00:0a: IRQ 4 override to edge, high
[    0.288055] pnp 00:0a: [irq 4]
[    0.288336] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.289756] pnp 00:0b: [io  0x03e8-0x03ef]
[    0.289772] pnp 00:0b: IRQ 4 override to edge, high
[    0.289786] pnp 00:0b: [irq 4]
[    0.290086] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.291047] pnp 00:0c: [io  0x02e8-0x02ef]
[    0.291062] pnp 00:0c: IRQ 4 override to edge, high
[    0.291075] pnp 00:0c: [irq 4]
[    0.291353] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.293413] pnp 00:0d: Plug and Play ACPI device, IDs PNP0400 (disabled)
[    0.294008] pnp 00:0e: [io  0x0060]
[    0.294021] pnp 00:0e: [io  0x0064]
[    0.294056] pnp 00:0e: [irq 1]
[    0.294308] pnp 00:0e: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.294391] pnp 00:0f: [irq 12]
[    0.294641] pnp 00:0f: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.294860] pnp: PnP ACPI: found 16 devices
[    0.294871] ACPI: ACPI bus type pnp unregistered
[    0.294930] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.294947] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.294963] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.294978] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.294993] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.295008] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.295024] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.295039] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.295075] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.295110] system 00:06: [io  0x0680-0x069f] has been reserved
[    0.295125] system 00:06: [io  0x0800-0x080f] has been reserved
[    0.295140] system 00:06: [io  0x1000-0x107f] has been reserved
[    0.295154] system 00:06: [io  0x1180-0x11bf] has been reserved
[    0.295169] system 00:06: [io  0x1640-0x164f] has been reserved
[    0.295198] system 00:07: [io  0x06a0-0x06af] has been reserved
[    0.295214] system 00:07: [io  0x06b0-0x06ff] has been reserved
[    0.342636] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.342649] pci 0000:00:1c.0:   bridge window [io  disabled]
[    0.342665] pci 0000:00:1c.0:   bridge window [mem disabled]
[    0.342682] pci 0000:00:1c.0:   bridge window [mem pref disabled]
[    0.342722] pci 0000:03:03.0: BAR 6: assigned [mem 0x20000000-0x2001ffff pref]
[    0.342741] pci 0000:03:02.0: BAR 6: assigned [mem 0x20020000-0x2002ffff pref]
[    0.342754] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[    0.342768] pci 0000:00:1e.0:   bridge window [io  0x2000-0x2fff]
[    0.342785] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xd00fffff]
[    0.342802] pci 0000:00:1e.0:   bridge window [mem 0x20000000-0x200fffff 64bit pref]
[    0.342882] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.342901] pci 0000:00:1c.0: setting latency timer to 64
[    0.342927] pci 0000:00:1e.0: setting latency timer to 64
[    0.342943] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.342956] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.342968] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.342980] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.342993] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.343005] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.343018] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    0.343030] pci_bus 0000:00: resource 11 [mem 0x20000000-0xfebfffff]
[    0.343044] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.343056] pci_bus 0000:03: resource 1 [mem 0xd0000000-0xd00fffff]
[    0.343070] pci_bus 0000:03: resource 2 [mem 0x20000000-0x200fffff 64bit pref]
[    0.343082] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.343094] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.343106] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.343118] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.343131] pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.343143] pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.343155] pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff]
[    0.343168] pci_bus 0000:03: resource 11 [mem 0x20000000-0xfebfffff]
[    0.343510] NET: Registered protocol family 2
[    0.343854] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.345035] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.345292] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    0.345518] TCP: Hash tables configured (established 16384 bind 16384)
[    0.345528] TCP reno registered
[    0.345542] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.345568] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.346037] NET: Registered protocol family 1
[    0.346109] pci 0000:00:02.0: Boot video device
[    0.346358] PCI: CLS mismatch (64 != 32), using 64 bytes
[    0.346570] Unpacking initramfs...
[    1.289888] Freeing initrd memory: 10524k freed
[    1.302615] Simple Boot Flag at 0x36 set to 0x1
[    1.304234] Scanning for low memory corruption every 60 seconds
[    1.305000] audit: initializing netlink socket (disabled)
[    1.305074] type=2000 audit(1353891720.304:1): initialized
[    1.351649] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.352730] VFS: Disk quotas dquot_6.5.2
[    1.352896] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.353672] msgmni has been set to 240
[    1.354605] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.354622] io scheduler noop registered
[    1.354631] io scheduler deadline registered
[    1.354744] io scheduler cfq registered (default)
[    1.356990] vesafb: framebuffer at 0xc0000000, mapped to 0xdff00000, using 1875k, total 1920k
[    1.357029] vesafb: mode is 800x600x16, linelength=1600, pages=469
[    1.357038] vesafb: scrolling: redraw
[    1.357052] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    1.357738] bootsplash 3.1.6-2004/03/31: looking for picture...
[    1.357753] bootsplash: silentjpeg size 124451 bytes
[    1.407781] bootsplash: ...found (800x600, 62872 bytes, v3).
[    1.540993] Console: switching to colour frame buffer device 96x33
[    1.672279] fb0: VESA VGA frame buffer device
[    1.672421] intel_idle: MWAIT substates: 0x20220
[    1.672459] intel_idle: v0.4 model 0x1C
[    1.672467] intel_idle: lapic_timer_reliable_states 0x2
[    1.672495] Marking TSC unstable due to TSC halts in idle states deeper than C2
[    1.672696] Switching to clocksource hpet
[    1.672830] ERST: Table is not found!
[    1.674307] Non-volatile memory driver v1.3
[    1.674320] Linux agpgart interface v0.103
[    1.674763] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[    1.675150] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    1.675459] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    1.682878] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    1.683307] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    1.704352] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.736808] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.768798] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[    1.800802] serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
[    1.897418] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.933996] 00:0a: ttyS1 at I/O 0x2f8 (irq = 4) is a 16550A
[    1.969991] 00:0b: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[    2.005998] 00:0c: ttyS3 at I/O 0x2e8 (irq = 4) is a 16550A
[    2.021768] ata_piix 0000:00:1f.1: version 2.13
[    2.021818] ata_piix 0000:00:1f.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    2.021983] ata_piix 0000:00:1f.1: setting latency timer to 64
[    2.023998] scsi0 : ata_piix
[    2.024643] scsi1 : ata_piix
[    2.027784] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[    2.027798] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[    2.027991] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    2.028246] ata_piix 0000:00:1f.2: MAP [ P0 P2
[    2.028264] ata2: port disabled. ignoring.
[    2.028273]  -- -- ]
[    2.028468] ata_piix 0000:00:1f.2: setting latency timer to 64
[    2.030260] scsi2 : ata_piix
[    2.030707] scsi3 : ata_piix
[    2.035121] ata3: SATA max UDMA/133 cmd 0x18d0 ctl 0x18c4 bmdma 0x18b0 irq 17
[    2.035136] ata4: SATA max UDMA/133 cmd 0x18c8 ctl 0x18c0 bmdma 0x18b8 irq 17
[    2.035779] Fixed MDIO Bus: probed
[    2.035807] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.035911] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.035986] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    2.036000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    2.036158] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    2.040113] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    2.040143] ehci_hcd 0000:00:1d.7: debug port 1
[    2.044037] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    2.044104] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0444000
[    2.053059] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.053161] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.053175] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.053187] usb usb1: Product: EHCI Host Controller
[    2.053197] usb usb1: Manufacturer: Linux 2.6.37.1-1.2-desktop ehci_hcd
[    2.053207] usb usb1: SerialNumber: 0000:00:1d.7
[    2.053820] hub 1-0:1.0: USB hub found
[    2.053845] hub 1-0:1.0: 8 ports detected
[    2.054324] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.054402] uhci_hcd: USB Universal Host Controller Interface driver
[    2.054570] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.054599] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.054612] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.054652] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.061091] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[    2.061260] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.061274] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.061286] usb usb2: Product: UHCI Host Controller
[    2.061296] usb usb2: Manufacturer: Linux 2.6.37.1-1.2-desktop uhci_hcd
[    2.061306] usb usb2: SerialNumber: 0000:00:1d.0
[    2.061879] hub 2-0:1.0: USB hub found
[    2.061904] hub 2-0:1.0: 2 ports detected
[    2.062293] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.062328] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    2.062342] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.062381] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    2.069122] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[    2.069291] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.069305] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.069316] usb usb3: Product: UHCI Host Controller
[    2.069326] usb usb3: Manufacturer: Linux 2.6.37.1-1.2-desktop uhci_hcd
[    2.069337] usb usb3: SerialNumber: 0000:00:1d.1
[    2.069892] hub 3-0:1.0: USB hub found
[    2.069917] hub 3-0:1.0: 2 ports detected
[    2.070312] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.070340] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    2.070353] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.070393] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    2.077128] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    2.077290] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.077304] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.077315] usb usb4: Product: UHCI Host Controller
[    2.077325] usb usb4: Manufacturer: Linux 2.6.37.1-1.2-desktop uhci_hcd
[    2.077336] usb usb4: SerialNumber: 0000:00:1d.2
[    2.077887] hub 4-0:1.0: USB hub found
[    2.077912] hub 4-0:1.0: 2 ports detected
[    2.078309] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    2.078343] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    2.078356] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    2.078396] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    2.085119] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[    2.085281] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.085296] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.085307] usb usb5: Product: UHCI Host Controller
[    2.085317] usb usb5: Manufacturer: Linux 2.6.37.1-1.2-desktop uhci_hcd
[    2.085328] usb usb5: SerialNumber: 0000:00:1d.3
[    2.085900] hub 5-0:1.0: USB hub found
[    2.085925] hub 5-0:1.0: 2 ports detected
[    2.086352] Initializing USB Mass Storage driver...
[    2.086536] usbcore: registered new interface driver usb-storage
[    2.086546] USB Mass Storage support registered.
[    2.086615] usbcore: registered new interface driver ums-alauda
[    2.086684] usbcore: registered new interface driver ums-cypress
[    2.086763] usbcore: registered new interface driver ums-datafab
[    2.086832] usbcore: registered new interface driver ums-freecom
[    2.086901] usbcore: registered new interface driver ums-isd200
[    2.086969] usbcore: registered new interface driver ums-jumpshot
[    2.087072] usbcore: registered new interface driver ums-karma
[    2.087143] usbcore: registered new interface driver ums-onetouch
[    2.087214] usbcore: registered new interface driver ums-sddr09
[    2.087285] usbcore: registered new interface driver ums-sddr55
[    2.087355] usbcore: registered new interface driver ums-usbat
[    2.087626] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.088359] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.088390] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.088944] mice: PS/2 mouse device common for all mice
[    2.089418] rtc_cmos 00:08: RTC can wake from S4
[    2.095309] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[    2.095386] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.095867] cpuidle: using governor ladder
[    2.096502] cpuidle: using governor menu
[    2.098319] usbcore: registered new interface driver usbhid
[    2.098329] usbhid: USB HID core driver
[    2.099586] TCP cubic registered
[    2.099955] NET: Registered protocol family 10
[    2.101680] lo: Disabled Privacy Extensions
[    2.102782] lib80211: common routines for IEEE802.11 drivers
[    2.102795] lib80211_crypt: registered algorithm 'NULL'
[    2.102805] Registering the dns_resolver key type
[    2.103082] libceph: loaded (mon/osd proto 15/24, osdmap 5/5 5/5)
[    2.103137] Using IPI No-Shortcut mode
[    2.103719] PM: Checking hibernation image partition /dev/disk/by-id/usb-SAMSUNG_SP0802N_581230080282-0:0-part5
[    2.106964] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.182561] ata1.00: CFA: SUNWORLD FODV1.22.128, 20080924, max UDMA/66
[    2.182579] ata1.00: 3980592 sectors, multi 0: LBA
[    2.182597] ata1.00: limited to UDMA/33 due to 40-wire cable
[    2.198079] ata1.00: configured for UDMA/33
[    2.198619] scsi 0:0:0:0: Direct-Access     ATA      SUNWORLD FODV1.2 2008 PQ: 0 ANSI: 5
[    2.199994] sd 0:0:0:0: [sda] 3980592 512-byte logical blocks: (2.03 GB/1.89 GiB)
[    2.200447] sd 0:0:0:0: [sda] Write Protect is off
[    2.200467] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.200648] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    2.210214]  sda: sda1
[    2.211377] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.355089] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    2.476227] usb 1-1: New USB device found, idVendor=1c6b, idProduct=a222
[    2.476245] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.476258] usb 1-1: Product: Mass Storage Device
[    2.476268] usb 1-1: Manufacturer: USB2.0 External
[    2.476277] usb 1-1: SerialNumber: 2010102900000000041
[    2.477447] scsi4 : usb-storage 1-1:1.0
[    2.580145] usb 1-2: new high speed USB device using ehci_hcd and address 3
[    2.696856] usb 1-2: New USB device found, idVendor=1005, idProduct=b113
[    2.696873] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.696886] usb 1-2: Product: FLASH DRIVE
[    2.696895] usb 1-2: Manufacturer: USB
[    2.696904] usb 1-2: SerialNumber: 000FF1103192029310316123
[    2.698187] scsi5 : usb-storage 1-2:1.0
[    2.801159] usb 1-4: new high speed USB device using ehci_hcd and address 4
[    2.916241] usb 1-4: New USB device found, idVendor=152d, idProduct=2338
[    2.916259] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[    2.916271] usb 1-4: Product: USB to ATA/ATAPI bridge
[    2.916281] usb 1-4: Manufacturer: JMicron
[    2.916291] usb 1-4: SerialNumber: 581230080282
[    2.917794] scsi6 : usb-storage 1-4:1.0
[    2.964745] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input1
[    2.967602] PM: Hibernation image not present or could not be loaded.
[    2.967685] registered taskstats version 1
[    2.968464]   Magic number: 4:50:4
[    2.968699] rtc_cmos 00:08: setting system clock to 2012-11-26 01:02:02 UTC (1353891722)
[    2.969149] Freeing unused kernel memory: 452k freed
[    2.970066] Write protecting the kernel text: 4700k
[    2.970369] Write protecting the kernel read-only data: 3188k
[    3.225299] ACPI: acpi_idle yielding to intel_idle
[    3.271328] udev[97]: starting version 166
[    3.481904] scsi 4:0:0:0: CD-ROM            Slimtype eTAU108   2      LL05 PQ: 0 ANSI: 0
[    3.494445] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    3.494942] ACPI: Lid Switch [LID0]
[    3.529321] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[    3.529642] ACPI: Power Button [PWRB]
[    3.555189] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    3.555517] ACPI: Power Button [PWRF]
[    3.614082] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    3.614415] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.699194] scsi 5:0:0:0: Direct-Access     USB      FLASH DRIVE      1.00 PQ: 0 ANSI: 2
[    3.701721] sd 5:0:0:0: [sdb] 8017920 512-byte logical blocks: (4.10 GB/3.82 GiB)
[    3.702476] sd 5:0:0:0: [sdb] Write Protect is off
[    3.702500] sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00
[    3.702517] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[    3.706607] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[    3.709507]  sdb: sdb1
[    3.711859] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[    3.711923] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[    3.919161] scsi 6:0:0:0: Direct-Access     SAMSUNG  SP0802N               PQ: 0 ANSI: 2 CCS
[    3.921640] sd 6:0:0:0: [sdc] 156368016 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    3.922675] sd 6:0:0:0: [sdc] Write Protect is off
[    3.922700] sd 6:0:0:0: [sdc] Mode Sense: 28 00 00 00
[    3.922718] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[    3.925545] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[    3.997627]  sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 sdc8 > sdc3 sdc4
[    4.002820] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[    4.002882] sd 6:0:0:0: [sdc] Attached SCSI disk
[    4.183433] [drm] Initialized drm 1.1.0 20060810
[    4.390192] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.390214] i915 0000:00:02.0: setting latency timer to 64
[    4.687466] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.688084] [drm] initialized overlay support
[    4.854083] checking generic (c0000000 1e0000) vs hw (c0000000 10000000)
[    4.854104] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    4.854210] Console: switching to colour dummy device 80x25
[    5.143101] bootsplash: scaling image from 800x600 to 1440x900
[    5.392494] bootsplash: scaling image from 800x600 to 1440x900
[    5.620158] bootsplash: scaling image from 800x600 to 1440x900
[    5.830142] bootsplash: scaling image from 800x600 to 1440x900
[    5.975292] Console: switching to colour frame buffer device 176x52
[    6.038967] bootsplash: scaling image from 800x600 to 1440x900
[    6.248854] bootsplash: scaling image from 800x600 to 1440x900
[    6.393040] fb0: inteldrmfb frame buffer device
[    6.393051] drm: registered panic notifier
[    6.393538] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    6.582129] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[    6.582151] PM: Basic memory bitmaps created
[    6.601668] PM: Basic memory bitmaps freed
[    6.601693] video LNXVIDEO:00: Restoring backlight state
[    6.801884] PM: Starting manual resume from disk
[    6.801900] PM: Hibernation image partition 8:37 present
[    6.801909] PM: Looking for hibernation image.
[    6.802720] PM: Image not found (code -22)
[    6.802732] PM: Hibernation image not present or could not be loaded.
[    7.163299] kjournald starting.  Commit interval 15 seconds
[    7.163976] EXT3-fs (sdc8): using internal journal
[    7.164045] EXT3-fs (sdc8): mounted filesystem with ordered data mode
[    9.625934] preloadtrace: systemtap: 1.4/0.149, base: e018a000, memory: 30data/39text/13ctx/13net/268alloc kb, probes: 34
[   10.325841] udev[370]: starting version 166
[   11.314650] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   11.453280] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.506417] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   11.545493] parport_pc 00:0d: [io  0x0378-0x037f]
[   11.545678] parport_pc 00:0d: [irq 5]
[   11.551502] parport_pc 00:0d: activated
[   11.551529] parport_pc 00:0d: reported by Plug and Play ACPI
[   11.551619] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
[   11.668984] intel_rng: FWH not detected
[   11.683422] ppdev: user-space parallel port driver
[   11.779818] iTCO_vendor_support: vendor-support=0
[   11.831424] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[   11.831895] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
[   11.832298] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   11.908119] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   11.908227] 8139cp 0000:03:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[   11.961484] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   11.961584] r8169 0000:03:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   11.961707] r8169 0000:03:03.0: (unregistered net_device): no PCI Express capability
[   11.965649] r8169 0000:03:03.0: eth0: RTL8169sc/8110sc at 0xe1f36400, 00:1a:a9:51:1a:76, XID 18000000 IRQ 19
[   11.970626] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   11.970652] ACPI: resource 0000:00:1f.3 [io  0x18e0-0x18ff] conflicts with ACPI region SMBI [??? 0x000018e0-0x000018ef flags 0x49]
[   11.970665] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.161658] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   12.162310] scsi 4:0:0:0: Attached scsi generic sg1 type 5
[   12.162948] sd 5:0:0:0: Attached scsi generic sg2 type 0
[   12.163702] sd 6:0:0:0: Attached scsi generic sg3 type 0
[   12.240532] leds_ss4200: no LED devices found
[   12.340658] 8139too: 8139too Fast Ethernet driver 0.9.28
[   12.340836] 8139too 0000:03:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   12.344984] 8139too 0000:03:02.0: eth1: RealTek RTL8139 at 0xe1fd8000, 00:1a:a9:51:1a:75, IRQ 18
[   12.981886] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   12.982148] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[   12.982255] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   13.235537] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda pop-up
[   13.235555] cdrom: Uniform CD-ROM driver Revision: 3.20
[   13.237219] sr 4:0:0:0: Attached scsi CD-ROM sr0
[   13.336788] hda_codec: ALC888: BIOS auto-probing.
[   13.336805] hda_codec: ALC888: SKU not ready 0x00000100
[   13.336832] ALSA hda_codec.c:4633: autoconfig: line_outs=4 (0x14/0x16/0x15/0x17/0x0)
[   13.336857] ALSA hda_codec.c:4637:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   13.336873] ALSA hda_codec.c:4641:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   13.336889] ALSA hda_codec.c:4642:    mono: mono_out=0x0
[   13.336900] ALSA hda_codec.c:4645:    dig-out=0x1e/0x0
[   13.336912] ALSA hda_codec.c:4646:    inputs:
[   13.336922] ALSA hda_codec.c:4652:
[   13.336933] ALSA hda_codec.c:4654:    dig-in=0x1f
[   13.338912] ALSA patch_realtek.c:1581: realtek: No valid SSID, checking pincfg 0x00000100 for NID 0x1d
[   13.338939] ALSA patch_realtek.c:1665: realtek: Enable default setup for auto mode as fallback
[   13.357628] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   19.391983] Adding 1861628k swap on /dev/sdc5.  Priority:-1 extents:1 across:1861628k
[   20.216063] device-mapper: uevent: version 1.0.3
[   20.216813] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[   23.472346] type=1400 audit(1353891743.003:2): apparmor="STATUS" operation="profile_load" name="/bin/ping" pid=906 comm="apparmor_parser"
[   23.761684] type=1400 audit(1353891743.292:3): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=911 comm="apparmor_parser"
[   24.423818] type=1400 audit(1353891743.954:4): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=915 comm="apparmor_parser"
[   25.053802] type=1400 audit(1353891744.584:5): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=919 comm="apparmor_parser"
[   27.667758] type=1400 audit(1353891747.198:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=924 comm="apparmor_parser"
[   27.668405] type=1400 audit(1353891747.199:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=924 comm="apparmor_parser"
[   27.668772] type=1400 audit(1353891747.199:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=924 comm="apparmor_parser"
[   27.669428] type=1400 audit(1353891747.200:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=924 comm="apparmor_parser"
[   28.307613] type=1400 audit(1353891747.838:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/deliver" pid=928 comm="apparmor_parser"
[   28.972348] type=1400 audit(1353891748.503:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/dovecot-auth" pid=932 comm="apparmor_parser"
[   29.602095] type=1400 audit(1353891749.132:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/imap" pid=936 comm="apparmor_parser"
[   29.887925] type=1400 audit(1353891749.418:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/imap-login" pid=940 comm="apparmor_parser"
[   30.174261] type=1400 audit(1353891749.705:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/managesieve-login" pid=944 comm="apparmor_parser"
[   30.797231] type=1400 audit(1353891750.328:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/pop3" pid=948 comm="apparmor_parser"
[   31.367746] type=1400 audit(1353891750.898:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/pop3-login" pid=952 comm="apparmor_parser"
[   31.994175] type=1400 audit(1353891751.525:17): apparmor="STATUS" operation="profile_load" name="/usr/sbin/avahi-daemon" pid=956 comm="apparmor_parser"
[   32.594134] type=1400 audit(1353891752.125:18): apparmor="STATUS" operation="profile_load" name="/usr/sbin/dnsmasq" pid=960 comm="apparmor_parser"
[   33.294507] type=1400 audit(1353891752.825:19): apparmor="STATUS" operation="profile_load" name="/usr/sbin/dovecot" pid=964 comm="apparmor_parser"
[   33.872855] type=1400 audit(1353891753.403:20): apparmor="STATUS" operation="profile_load" name="/usr/sbin/identd" pid=968 comm="apparmor_parser"
[   35.084176] audit_printk_skb: 3 callbacks suppressed
[   35.084191] type=1400 audit(1353891754.615:22): apparmor="STATUS" operation="profile_load" name="/usr/sbin/nmbd" pid=976 comm="apparmor_parser"
[   35.860914] type=1400 audit(1353891755.391:23): apparmor="STATUS" operation="profile_load" name="/usr/sbin/nscd" pid=980 comm="apparmor_parser"
[   36.805207] type=1400 audit(1353891756.336:24): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=984 comm="apparmor_parser"
[   37.648823] type=1400 audit(1353891757.179:25): apparmor="STATUS" operation="profile_load" name="/usr/sbin/smbd" pid=988 comm="apparmor_parser"
[   38.216380] type=1400 audit(1353891757.747:26): apparmor="STATUS" operation="profile_load" name="/usr/sbin/traceroute" pid=992 comm="apparmor_parser"
[   38.469658] bootsplash: status on console 0 changed to on
[   54.840236] YaST2.call (2149): /proc/2615/oom_adj is deprecated, please use /proc/2615/oom_score_adj instead.
[  138.859891] r8169 0000:03:03.0: eth0: link up
[  138.910246] eth1: link down
[  138.910476] ADDRCONF(NETDEV_UP): eth1: link is not ready
[  141.396658] st: Version 20100829, fixed bufsize 32768, s/g segs 256
[  149.538066] eth0: no IPv6 routers present
[  171.947545] NET: Registered protocol family 17
[  211.194923] ip6_tables: (C) 2000-2006 Netfilter Core Team
[  211.356624] nf_conntrack version 0.5.0 (7697 buckets, 30788 max)
[  211.429511] ip_tables: (C) 2000-2006 Netfilter Core Team
[  328.012334] HDA Intel 0000:00:1b.0: PCI INT A disabled
[  328.696134] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[  328.696326] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[  328.696433] HDA Intel 0000:00:1b.0: setting latency timer to 64
[  328.773288] hda_codec: ALC888: BIOS auto-probing.
[  328.773311] hda_codec: ALC888: SKU not ready 0x00000100
[  328.773337] ALSA hda_codec.c:4633: autoconfig: line_outs=4 (0x14/0x16/0x15/0x17/0x0)
[  328.773362] ALSA hda_codec.c:4637:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[  328.773383] ALSA hda_codec.c:4641:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[  328.773405] ALSA hda_codec.c:4642:    mono: mono_out=0x0
[  328.773422] ALSA hda_codec.c:4645:    dig-out=0x1e/0x0
[  328.773439] ALSA hda_codec.c:4646:    inputs:
[  328.773454] ALSA hda_codec.c:4652:
[  328.773468] ALSA hda_codec.c:4654:    dig-in=0x1f
[  328.776289] ALSA patch_realtek.c:1581: realtek: No valid SSID, checking pincfg 0x00000100 for NID 0x1d
[  328.776318] ALSA patch_realtek.c:1665: realtek: Enable default setup for auto mode as fallback
[  328.784811] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[  370.363504] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
[  416.847245] type=1400 audit(1353892136.805:27): apparmor="DENIED" operation="change_hat" info="unconfined" error=-1 pid=10253 comm="kdm"
[  416.847308] type=1400 audit(1353892136.805:28): apparmor="DENIED" operation="change_hat" info="unconfined" error=-1 pid=10253 comm="kdm"
[  485.930286] fuse init (API version 7.15)
[ 2742.764984] Uhhuh. NMI received for unknown reason 21 on CPU 0.
[ 2742.765018] Do you have a strange power saving mode enabled?
[ 2742.765018] Dazed and confused, but trying to continue
[26858.759208] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)
[27975.240276] loop: module loaded
[27975.698659] ISO 9660 Extensions: Microsoft Joliet Level 3
[27975.836221] ISO 9660 Extensions: RRIP_1991A
[27976.042555] ISO 9660 Extensions: Microsoft Joliet Level 3
[27976.044127] ISO 9660 Extensions: RRIP_1991A
[27976.778468] ISO 9660 Extensions: Microsoft Joliet Level 3
[27976.778599] ISO 9660 Extensions: RRIP_1991A
[27977.585291] ISO 9660 Extensions: Microsoft Joliet Level 3
[27977.585461] ISO 9660 Extensions: RRIP_1991A
[27978.387951] ISO 9660 Extensions: Microsoft Joliet Level 3
[27978.388773] ISO 9660 Extensions: RRIP_1991A
[27984.469197] ISO 9660 Extensions: Microsoft Joliet Level 3
[27984.469347] ISO 9660 Extensions: RRIP_1991A
[29644.650766] usb 1-1: USB disconnect, address 2
[29644.815446] hub 1-0:1.0: unable to enumerate USB device on port 1
[29653.704252] usb 1-1: new high speed USB device using ehci_hcd and address 6
[29653.819731] usb 1-1: New USB device found, idVendor=03f0, idProduct=002a
[29653.819749] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[29653.819762] usb 1-1: Product: HP LaserJet Professional P1102
[29653.819773] usb 1-1: Manufacturer: Hewlett-Packard
[29653.819783] usb 1-1: SerialNumber: 000000000Q83EMK8SI1c
[29653.823690] scsi7 : usb-storage 1-1:1.0
[29654.148154] WARNING! power/level is deprecated; use power/control instead
[29654.834210] scsi 7:0:0:0: CD-ROM            HP       Smart Install    1.0  PQ: 0 ANSI: 2
[29654.874466] sr0: scsi3-mmc drive: 0x/0x caddy
[29654.875307] sr 7:0:0:0: Attached scsi CD-ROM sr0
[29654.875644] sr 7:0:0:0: Attached scsi generic sg1 type 5
[44249.241244] ISO 9660 Extensions: Microsoft Joliet Level 3
[44249.245422] ISO 9660 Extensions: RRIP_1991A
[48605.908399] SFW2-INext-ACC IN=eth0 OUT= MAC= SRC=192.168.0.133 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
[51319.823983] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:1a:a9:51:1a:76:00:e0:4c:be:58:5f:08:00 SRC=192.168.0.1 DST=192.168.0.133 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=39752 DF PROTO=TCP SPT=60798 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A01582CD10000000001030307)
[51322.821911] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:1a:a9:51:1a:76:00:e0:4c:be:58:5f:08:00 SRC=192.168.0.1 DST=192.168.0.133 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=39753 DF PROTO=TCP SPT=60798 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A01582FBF0000000001030307)
[51328.831490] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:1a:a9:51:1a:76:00:e0:4c:be:58:5f:08:00 SRC=192.168.0.1 DST=192.168.0.133 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=39754 DF PROTO=TCP SPT=60798 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A0158359D0000000001030307)
[51340.831711] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:1a:a9:51:1a:76:00:e0:4c:be:58:5f:08:00 SRC=192.168.0.1 DST=192.168.0.133 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=39755 DF PROTO=TCP SPT=60798 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A015841550000000001030307)
[51364.833966] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:1a:a9:51:1a:76:00:e0:4c:be:58:5f:08:00 SRC=192.168.0.1 DST=192.168.0.133 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=39756 DF PROTO=TCP SPT=60798 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A015858C50000000001030307)
[51412.838423] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:1a:a9:51:1a:76:00:e0:4c:be:58:5f:08:00 SRC=192.168.0.1 DST=192.168.0.133 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=39757 DF PROTO=TCP SPT=60798 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A015887A50000000001030307)


Спасибо сказали:
Аватара пользователя
broom
Бывший модератор
Сообщения: 1629
Статус: мизантроп.ка
ОС: Gentoo

Re: Проблемы с HP P1102

Сообщение broom »

Мне удавалось решить эту проблему следующим образом: сначала включаем принтер, даём ему время прошуршаться и проморгаться, то есть ждём, пока лампочка не перестанет моргать. Только после этого подключаем принтер к компьютеру (по USB). Теперь можно идти в CUPS и настраивать принтер.
После установки принтера очередность включения/подключения принтера к компу не важна.
but in the darkness, behind your smile, you scream... © Dio
Спасибо сказали:
kryuch
Сообщения: 44
ОС: openSUSE 10.0

Re: Проблемы с HP P1102

Сообщение kryuch »

broom писал(а):
27.11.2012 21:52
сначала включаем принтер, даём ему время прошуршаться и проморгаться, то есть ждём, пока лампочка не перестанет моргать. Только после этого подключаем принтер к компьютеру (по USB). Теперь можно идти в CUPS и настраивать принтер.


Сейчас под рукой только SLES SP 2, попробывал, действительно опеределился как принтер (хотя может SLES бы его и так правильно определил), но печатать не стал, говорит "остановлено со статусом 3", буду это копать
Спасибо сказали:
Аватара пользователя
Janik
Сообщения: 848
Статус: Оператор вычислительных машин
ОС: Debian

Re: Проблемы с HP P1102

Сообщение Janik »

UPD: проблема решена, пост можно удалить.
Кто ищет, тот всегда найдет!
Опыт - это когда все получается с первого раза.
Спасибо сказали:
Аватара пользователя
eddy
Сообщения: 3321
Статус: Красный глаз тролля
ОС: ArchLinux
Контактная информация:

Re: Проблемы с HP P1102

Сообщение eddy »

Janik писал(а):
29.12.2012 09:08
UPD: проблема решена, пост можно удалить.

А можно поподробней: как?
У меня эта дрянь ни в какую работать не хочет. Так и стоит мертвым грузом на столе…
RTFM
-------
KOI8-R - патриотичная кодировка Изображение
Спасибо сказали:
Аватара пользователя
Janik
Сообщения: 848
Статус: Оператор вычислительных машин
ОС: Debian

Re: Проблемы с HP P1102

Сообщение Janik »

Поставил драйвер foomatic

Код: Выделить всё

HP LaserJet Pro P1102 Foomatic/foo2zjs-z2
Кто ищет, тот всегда найдет!
Опыт - это когда все получается с первого раза.
Спасибо сказали:
PVOzerski
Сообщения: 297
ОС: OpenSUSE, ALT Linux

Re: Проблемы с HP P1102

Сообщение PVOzerski »

Вот и у меня проблемка с этим принтером...

Жил себе с HPLIP - но после очередного обновления системы (OpenSUSE 12.3) принтер начал путаться с размером бумаги - размахивать содержимое страницы на 2 листа и делать огромный шрифт. Переставил драйвер на foo2zjs-z2 - теперь с портретной ориентацией всё в порядке, зато альбомную OpenOffice игнорит - не разворачивает содержимое листа на 90 градусов, а шлепает, как обычно.

Это как-то поправить можно? Т.е. обходной-то я путь нашел: захожу в OpenOffice в пункт меню "Настройки принтера" и меняю тип языка принтера с PDF на Postscript. Проблема в том, что это изменение не удается сделать по умолчанию, оно "забывается" после завершения программы.
Спасибо сказали:
PVOzerski
Сообщения: 297
ОС: OpenSUSE, ALT Linux

Re: Проблемы с HP P1102

Сообщение PVOzerski »

Я понимаю, что самому с собой вести беседу - занятие странное, но вдруг кто прочитает...

В общем, решение-то на поверхности, нужно сделать один хак и даже не особо грязный. Во всяком случае, ни в код драйвера, ни в код ghostscript'а, ни даже в код cups лезть не надо. Смотрите сами.

Когда cups вызывает ghostscript, от имеет в это время свой вариант переменной PATH. Почему - я не разбирался, да это не важно. Важно, что в этом пути первой идет директория /usr/lib/cups/filter. Дык вот, если туда подложить бинарник с именем gs, он будет запущен вместо настоящего (экспериментально выяснилось, что ему над включить SUID, но это уже мелочи. А так я вообще туда симлинк закинул). Этот перехватчик потенциально в состоянии: а) получить поток в формате PDF или Postscript; б) скорректировать его (я думаю, можно попробовать использовать pdftk); вызвать по полному пути оригинальный gs.

Некоторые обнадеживающие опыты я проделал. Дописывать "перехватчик" смогу разве что урывками - и то не факт. Так что если идея кого-нибудь вдохновит на самостоятельную реализацию - не обижусь. Могу даже пробный код отдать - правда, он на паскале.
Спасибо сказали:
Ответить