GF-6600 tv-out чёрно-белое изображение

[ino]

Люди, прошу помочь. Имею: Fedora12, видюха GF6600, дрова из rpmfusion, телевизор, подключенный к TV-Out через композитный вход. Через nvidia-settings я включил тв-выход в TwinView в Left Of. Всё бы ничего, да изображение на телике чёрно-белое. Когда я делаю init 3 изображение становится цветным.
Вот xorg.conf :

Код: Выделить всё

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (mockbuild@builder.wilsonet.com)  Sun Feb 28 16:29:16 EST 2010

# Xorg configuration created by livna-config-display

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
    ModulePath      "/usr/lib/xorg/modules/extensions/nvidia"
    ModulePath      "/usr/lib/xorg/modules"
EndSection

Section "ServerFlags"
    Option         "AIGLX" "on"
EndSection

Section "InputDevice"

    # generated from data in "/etc/sysconfig/keyboard"
    Identifier     "Keyboard0"
    Driver         "kbd"
    Option         "XkbLayout" "us"
    Option         "XkbModel" "pc105"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/input/mice"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "LG W1934"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 75.0
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
   Option         "AddARGBGLXVisuals" "True"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 6600"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "Videocard0"
    Monitor        "Monitor0"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "1"
    Option         "TwinViewXineramaInfoOrder" "CRT-0"

    Option "TVStandard" "PAL-D"

    Option         "metamodes" "CRT: 1440x900_75 +0+0, TV: nvidia-auto-select +1440+0; CRT: nvidia-auto-select +0+0, TV: nvidia-auto-select +1440+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Extensions"
    Option         "Composite" "Enable"
EndSection

Спасибо заранее.

[denel]

Люди, прошу помочь. Имею: Fedora12, видюха GF6600, дрова из rpmfusion, телевизор, подключенный к TV-Out через композитный вход. Через nvidia-settings я включил тв-выход в TwinView в Left Of. Всё бы ничего, да изображение на телике чёрно-белое. Когда я делаю init 3 изображение становится цветным.
Вот xorg.conf :

Код: Выделить всё

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (mockbuild@builder.wilsonet.com)  Sun Feb 28 16:29:16 EST 2010

# Xorg configuration created by livna-config-display

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
    ModulePath      "/usr/lib/xorg/modules/extensions/nvidia"
    ModulePath      "/usr/lib/xorg/modules"
EndSection

Section "ServerFlags"
    Option         "AIGLX" "on"
EndSection

Section "InputDevice"

    # generated from data in "/etc/sysconfig/keyboard"
    Identifier     "Keyboard0"
    Driver         "kbd"
    Option         "XkbLayout" "us"
    Option         "XkbModel" "pc105"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/input/mice"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "LG W1934"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 75.0
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
   Option         "AddARGBGLXVisuals" "True"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 6600"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "Videocard0"
    Monitor        "Monitor0"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "1"
    Option         "TwinViewXineramaInfoOrder" "CRT-0"

    Option "TVStandard" "PAL-D"

    Option         "metamodes" "CRT: 1440x900_75 +0+0, TV: nvidia-auto-select +1440+0; CRT: nvidia-auto-select +0+0, TV: nvidia-auto-select +1440+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Extensions"
    Option         "Composite" "Enable"
EndSection

Спасибо заранее.

необходимо доабвить опцию "TVOutFormat" в секцию Screen.
В случае с подключением по S-Video значение опции - "SVIDEO",
а в случае с подключением по Composite значение - "COMPOSITE"