Собстевнно вопрос. Пытаюсь собрать из исходников пакет gpointing-device-settings-1.4.0 (версия более свежая). "./configure" проходит без ошибок, но "make" вылетает с ошибкой:
Код: Выделить всё
make[2]: *** Нет правила для сборки цели `gpointing-device-settings.1', требуемой для `all-am'. Останов.Я смотрел по форуму и по Гуглу и ещё много где. Хедеры стоят, все зависимости вроде удовлетворены. По крайней мере то, что в начале не нравилось команде "./configure" я понаходил и подоставлял. Ниже то, что выдаёт терминал полностью.
Код: Выделить всё
epaminond@epaminond-laptop:~/tmp/gpointing-device-settings-1.4.0$ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking how to create a pax tar archive... gnutar
checking how to create a pax tar archive... (cached) gnutar
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking dependency style of gcc... (cached) gcc3
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for ar... ar
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ISO C89... (cached) none needed
checking dependency style of gcc... (cached) gcc3
checking dependency style of gcc... (cached) gcc3
checking how to run the C preprocessor... gcc -E
checking whether make sets $(MAKE)... (cached) yes
checking whether NLS is requested... yes
checking for intltool >= 0.35.0... 0.41.0 found
checking for intltool-update... /usr/bin/intltool-update
checking for intltool-merge... /usr/bin/intltool-merge
checking for intltool-extract... /usr/bin/intltool-extract
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for perl... /usr/bin/perl
checking for perl >= 5.8.1... 5.10.0
checking for XML::Parser... ok
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking for LC_MESSAGES... yes
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking for ngettext in libc... yes
checking for dgettext in libc... yes
checking for bind_textdomain_codeset... yes
checking for msgfmt... (cached) /usr/bin/msgfmt
checking for dcgettext... yes
checking if msgfmt accepts -c... yes
checking for gmsgfmt... (cached) /usr/bin/msgfmt
checking for xgettext... (cached) /usr/bin/xgettext
checking for locale.h... (cached) yes
checking for LC_MESSAGES... (cached) yes
checking for libintl.h... (cached) yes
checking for ngettext in libc... (cached) yes
checking for dgettext in libc... (cached) yes
checking for bind_textdomain_codeset... (cached) yes
checking for msgfmt... (cached) /usr/bin/msgfmt
checking for dcgettext... (cached) yes
checking if msgfmt accepts -c... yes
checking for gmsgfmt... (cached) /usr/bin/msgfmt
checking for xgettext... (cached) /usr/bin/xgettext
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for GTK+ - version >= 2.14.0... yes (version 2.18.3)
checking for glib-genmarshal... /usr/bin/glib-genmarshal
checking for glib-mkenums... /usr/bin/glib-mkenums
checking pkg-config is at least version 0.9.0... yes
checking for GCONF2... yes
Using config source xml:merged:/etc/gconf/gconf.xml.defaults for schema installation
Using $(sysconfdir)/gconf/schemas as install directory for schema files
checking for gconftool-2... /usr/bin/gconftool-2
checking for XINPUT... yes
checking for X11... yes
checking for an ANSI C-conforming const... yes
checking whether to use Cutter... (cached) auto
checking for CUTTER... no
checking for lcov... no
checking for genhtml... no
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating modules/Makefile
config.status: creating modules/common/Makefile
config.status: creating modules/gnome-settings-daemon-plugins/Makefile
config.status: creating data/Makefile
config.status: creating data/gpointing-device-settings.desktop.in
config.status: creating test/Makefile
config.status: creating doc/Makefile
config.status: creating po/Makefile.in
config.status: creating libgpointing-device-settings.pc
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default-1 commands
config.status: executing default-2 commands
config.status: executing po/stamp-it commands
epaminond@epaminond-laptop:~/tmp/gpointing-device-settings-1.4.0$ make
make all-recursive
make[1]: Вход в каталог `/home/epaminond/tmp/gpointing-device-settings-1.4.0'
Making all in src
make[2]: Вход в каталог `/home/epaminond/tmp/gpointing-device-settings-1.4.0/src'
CC libgpds_la-gpds-module.lo
CC libgpds_la-gpds-ui.lo
CC libgpds_la-gpds-xinput-ui.lo
CC libgpds_la-gpds-gconf.lo
CC libgpds_la-gpds-utils.lo
CC libgpds_la-gpds-xinput.lo
gpds-xinput.c:330: warning: ‘get_max_value_count_type_from_property_enum’ defined but not used
CC libgpds_la-gpds-xinput-pointer-info.lo
CC libgpds_la-gpds-xinput-utils.lo
CCLD libgpds.la
CC gpointing_device_settings-gpointing-device-settings.o
CCLD gpointing-device-settings
make[2]: Выход из каталога `/home/epaminond/tmp/gpointing-device-settings-1.4.0/src'
Making all in modules
make[2]: Вход в каталог `/home/epaminond/tmp/gpointing-device-settings-1.4.0/modules'
Making all in common
make[3]: Вход в каталог `/home/epaminond/tmp/gpointing-device-settings-1.4.0/modules/common'
CC gpds-mouse-xinput.lo
CCLD libmouse_common.la
CC gpds-touchpad-xinput.lo
CCLD libtouchpad_common.la
make[3]: Выход из каталога `/home/epaminond/tmp/gpointing-device-settings-1.4.0/modules/common'
Making all in gnome-settings-daemon-plugins
make[3]: Вход в каталог `/home/epaminond/tmp/gpointing-device-settings-1.4.0/modules/gnome-settings-daemon-plugins'
CC libpointing_device_la-gsd-pointing-device-plugin.lo
CC libpointing_device_la-gsd-pointing-device-manager.lo
CC libpointing_device_la-gsd-mouse-extension-manager.lo
CC libpointing_device_la-gsd-touchpad-manager.lo
CCLD libpointing-device.la
LC_ALL=C /usr/bin/intltool-merge -d -u -c ../../po/.intltool-merge-cache ../../po pointing-device.gnome-settings-plugin.in pointing-device.gnome-settings-plugin
Generating and caching the translation database
Merging translations into pointing-device.gnome-settings-plugin.
make[3]: Выход из каталога `/home/epaminond/tmp/gpointing-device-settings-1.4.0/modules/gnome-settings-daemon-plugins'
make[3]: Вход в каталог `/home/epaminond/tmp/gpointing-device-settings-1.4.0/modules'
CC gpds-mouse-ui.lo
CCLD mouse.la
CC gpds-touchpad-ui.lo
CCLD touchpad.la
make[3]: Выход из каталога `/home/epaminond/tmp/gpointing-device-settings-1.4.0/modules'
make[2]: Выход из каталога `/home/epaminond/tmp/gpointing-device-settings-1.4.0/modules'
Making all in data
make[2]: Вход в каталог `/home/epaminond/tmp/gpointing-device-settings-1.4.0/data'
LC_ALL=C /usr/bin/intltool-merge -d -u -c ../po/.intltool-merge-cache ../po gpointing-device-settings.desktop.in gpointing-device-settings.desktop
Found cached translation database
Merging translations into gpointing-device-settings.desktop.
LC_ALL=C /usr/bin/intltool-merge -s -u -c ../po/.intltool-merge-cache ../po gpointing-device-settings_gnome_settings_daemon.schemas.in gpointing-device-settings_gnome_settings_daemon.schemas
Found cached translation database
Merging translations into gpointing-device-settings_gnome_settings_daemon.schemas.
make[2]: Выход из каталога `/home/epaminond/tmp/gpointing-device-settings-1.4.0/data'
Making all in test
make[2]: Вход в каталог `/home/epaminond/tmp/gpointing-device-settings-1.4.0/test'
make[2]: Цель `all' не требует выполнения команд.
make[2]: Выход из каталога `/home/epaminond/tmp/gpointing-device-settings-1.4.0/test'
Making all in po
make[2]: Вход в каталог `/home/epaminond/tmp/gpointing-device-settings-1.4.0/po'
file=`echo cs | sed 's,.*/,,'`.gmo \
&& rm -f $file && /usr/bin/msgfmt -o $file cs.po
file=`echo de | sed 's,.*/,,'`.gmo \
&& rm -f $file && /usr/bin/msgfmt -o $file de.po
file=`echo el | sed 's,.*/,,'`.gmo \
&& rm -f $file && /usr/bin/msgfmt -o $file el.po
file=`echo en_GB | sed 's,.*/,,'`.gmo \
&& rm -f $file && /usr/bin/msgfmt -o $file en_GB.po
file=`echo es | sed 's,.*/,,'`.gmo \
&& rm -f $file && /usr/bin/msgfmt -o $file es.po
file=`echo fr | sed 's,.*/,,'`.gmo \
&& rm -f $file && /usr/bin/msgfmt -o $file fr.po
file=`echo gl | sed 's,.*/,,'`.gmo \
&& rm -f $file && /usr/bin/msgfmt -o $file gl.po
file=`echo ja | sed 's,.*/,,'`.gmo \
&& rm -f $file && /usr/bin/msgfmt -o $file ja.po
file=`echo pa | sed 's,.*/,,'`.gmo \
&& rm -f $file && /usr/bin/msgfmt -o $file pa.po
file=`echo pt | sed 's,.*/,,'`.gmo \
&& rm -f $file && /usr/bin/msgfmt -o $file pt.po
file=`echo sl | sed 's,.*/,,'`.gmo \
&& rm -f $file && /usr/bin/msgfmt -o $file sl.po
file=`echo sv | sed 's,.*/,,'`.gmo \
&& rm -f $file && /usr/bin/msgfmt -o $file sv.po
file=`echo zh_CN | sed 's,.*/,,'`.gmo \
&& rm -f $file && /usr/bin/msgfmt -o $file zh_CN.po
make[2]: Выход из каталога `/home/epaminond/tmp/gpointing-device-settings-1.4.0/po'
Making all in doc
make[2]: Вход в каталог `/home/epaminond/tmp/gpointing-device-settings-1.4.0/doc'
make[2]: *** Нет правила для сборки цели `gpointing-device-settings.1', требуемой для `all-am'. Останов.
make[2]: Выход из каталога `/home/epaminond/tmp/gpointing-device-settings-1.4.0/doc'
make[1]: *** [all-recursive] Ошибка 1
make[1]: Выход из каталога `/home/epaminond/tmp/gpointing-device-settings-1.4.0'
make: *** [all] Ошибка 2Конечно, приветствуются другие варианты решения проблемы, но я хотел бы таки разобраться с этим, т.к. до этого уже пару раз на этой же ошибке у меня сборка из исходников заканчивалась. Надеюсь на вашу помощь!