ATI HD 3000 + kernel 3.16 (Подружить видео от ATI с ядром выше 3.16)

nVidia, ATI, SIS, VIA и др.

Модератор: Модераторы разделов

vzvl
Сообщения: 26
ОС: Mint 9 / Debian 6.0.4 squeeze

ATI HD 3000 + kernel 3.16

Сообщение vzvl »

Доброго времени суток.
Планирую собрать комп, прицеливаюсь к мамкам.
Комп будет использоваться с двумя мониторами, поэтому хотелось интегрированное видео и два видео-порта.

Так вот вопрос есть мать - http://technopoint.ru/catalog/i0137064/mat...s-m5a78l-m-usb3 у нее интегрированная карта ATI HD 3000

Есть ли какие-то проблемы с дровами для нее в новых версиях ядра?

На оф. сайте читаю "Automated installer and Display Drivers for Xorg 6.9 to Xserver 1.12 and Kernel version up to 3.4" http://support.amd.com/ru-ru/download/desk...mp;os=Linux+x86

Рассматриваю еще вот эту как вариант http://www.asrock.com/mb/NVIDIA/N68C-GS4%20FX/index.ru.asp
Но по параметрам она похуже будет...

Вообще не нашел не одной матери с интегрированной видео от nvidia выше GeForce 7025 чтобы по ценнику в приделах 5000.

В общем если посоветуете что-то с другими чипсетами но с поддержкой AMD AM3+ буду благодарен.

Спасибо сказали:

Аватара пользователя
yars
Сообщения: 1144
Статус: Slacker!
ОС: Slackware64-current

Re: ATI HD 3000 + kernel 3.16

Сообщение yars »

А свободный amdgpu даже не рассматриваете? Говорят, в последних версиях он почти не отстает в производительности от блоба.
Slackware64-current/Xfce 4.12/Acer TravelMate 5760
-------------
Registered Linux User #557010
Спасибо сказали:

Аватара пользователя
Bizdelnick
Модератор
Сообщения: 18483
Статус: grammatikführer
ОС: Debian GNU/Linux

Re: ATI HD 3000 + kernel 3.16

Сообщение Bizdelnick »

yars писал(а):
22.11.2015 16:34
amdgpu

Он разве поддерживает HD3000? Для него вроде из свободных только radeon подходит, с ним проблем по идее быть не должно.
Пишите правильно:
в консоли
вку́пе (с чем-либо)
в общем
вообще
в течение (часа)
новичок
нюанс
по умолчанию
приемлемо
проблема
пробовать
трафик
Спасибо сказали:

Аватара пользователя
Bizdelnick
Модератор
Сообщения: 18483
Статус: grammatikführer
ОС: Debian GNU/Linux

Re: ATI HD 3000 + kernel 3.16

Сообщение Bizdelnick »

vzvl
А варианты с APU принципиально не рассматриваете?
Пишите правильно:
в консоли
вку́пе (с чем-либо)
в общем
вообще
в течение (часа)
новичок
нюанс
по умолчанию
приемлемо
проблема
пробовать
трафик
Спасибо сказали:

ava297
Сообщения: 6
ОС: Debian GNU/Linux (testing)

Re: ATI HD 3000 + kernel 3.16

Сообщение ava297 »

Здраствуйте.
Подниму тему.
Видеокарта HIS HD 3870 IceQ 3 Turbo 512MB (256bit) GDDR4 PCIe (чип RV670).
Система Debian 9 Stretch (Testing). Linux kernel 4.3 amd64.
Система зависает при загрузке. Перезагрузка возможна только с помощью кнопки Reset или Power. Клавиатура не работает.
Если в опциях ядра прописать nomodeset или radeon.modeset=0, система загружается, но используеться драйвер vesa.
Если заменить видеокарту на ATI X1600 PRO (чип RV530) - загрузка системы проходит нормально. Но хочеться заставить работать более мощную видеокарту.
Установлен видеодрайвер xserver-xorg-video-ati 1:7.6.1 и прошивки firmware-amd-graphics 20160110-1.
Вывод сообщений ядра до зависания через последовательный СОМ порт.

Код: Выделить всё

[    0.000000] microcode: CPU0 microcode updated early to revision 0xa0b, date = 2010-09-28
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.3.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.3.1 20160114 (Debian 5.3.1-6) ) #1 SMP Debian 4.3.3-7 (2016-01-19)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.3.0-1-amd64 root=UUID=fe96a00f-4fa0-4721-a2f8-3d0ae7fb924e ro console=ttyS0,9600
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 0x240 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff6ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cff70000-0x00000000cff7dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cff7e000-0x00000000cffcffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cffd0000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT
[    0.000000] e820: last_pfn = 0xcff70 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000] init_memory_mapping: [mem 0x22fe00000-0x22fffffff]
[    0.000000] init_memory_mapping: [mem 0x220000000-0x22fdfffff]
[    0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff]
[    0.000000] init_memory_mapping: [mem 0x00100000-0xcff6ffff]
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[    0.000000] RAMDISK: [mem 0x36056000-0x37022fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FAFF0 000024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 0x00000000CFF70100 00005C (v01 A_M_I_ OEMXSDT  07000910 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000CFF70290 0000F4 (v03 A_M_I_ OEMFACP  07000910 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000CFF70440 009721 (v01 A0999  A0999001 00000001 INTL 20060113)
[    0.000000] ACPI: FACS 0x00000000CFF7E000 000040
[    0.000000] ACPI: FACS 0x00000000CFF7E000 000040
[    0.000000] ACPI: APIC 0x00000000CFF70390 00006C (v01 A_M_I_ OEMAPIC  07000910 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000CFF70400 00003C (v01 A_M_I_ OEMMCFG  07000910 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000CFF7E040 000089 (v01 A_M_I_ AMI_OEM  07000910 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000CFF79B70 000038 (v01 A_M_I_ OEMHPET  07000910 MSFT 00000097)
[    0.000000] ACPI: OSFR 0x00000000CFF79BB0 0000B0 (v01 A_M_I_ OEMOSFR  07000910 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000CFF7E9D0 000A7C (v01 DpgPmm CpuPm    00000012 INTL 20060113)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x22fff6000-0x22fff9fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000022fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000cff6ffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000022fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fffffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcff70000-0xcff7dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xcff7e000-0xcffcffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcffd0000-0xcfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[    0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 32 pages/cpu @ffff88022fc00000 s93016 r8192 d29864 u524288
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2064122
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.3.0-1-amd64 root=UUID=fe96a00f-4fa0-4721-a2f8-3d0ae7fb924e ro console=ttyS0,9600
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Memory: 8159968K/8387636K available (5675K kernel code, 1050K rwdata, 2796K rodata, 1296K init, 836K bss, 227668K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     Build-time adjustment of leaf fanout to 64.
[    0.000000]     RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:456 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2666.563 MHz processor
[    0.008010] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.12 BogoMIPS (lpj=10666252)
[    0.016002] pid_max: default: 32768 minimum: 301
[    0.020009] ACPI: Core revision 20150818
[    0.032896] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.044027] Security Framework initialized
[    0.048003] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.052009] AppArmor: AppArmor disabled by boot time parameter
[    0.056590] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.066497] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.073406] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.076017] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.080349] Initializing cgroup subsys io
[    0.084009] Initializing cgroup subsys memory
[    0.088007] Initializing cgroup subsys devices
[    0.092004] Initializing cgroup subsys freezer
[    0.096004] Initializing cgroup subsys net_cls
[    0.100005] Initializing cgroup subsys perf_event
[    0.104004] Initializing cgroup subsys net_prio
[    0.108026] CPU: Physical Processor ID: 0
[    0.112002] CPU: Processor Core ID: 0
[    0.116002] mce: CPU supports 6 MCE banks
[    0.120011] mce: [Hardware Error]: Machine check events logged
[    0.124005] CPU0: Thermal monitoring enabled (TM2)
[    0.128003] process: using mwait in idle threads
[    0.132006] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.136002] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.140307] Freeing SMP alternatives memory: 20K (ffffffff81c4c000 - ffffffff81c51000)
[    0.152004] ftrace: allocating 23625 entries in 93 pages
[    0.164436] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.208000] smpboot: CPU0: Intel® Core(tm)2 Quad CPU    Q9400  @ 2.66GHz (family: 0x6, model: 0x17, stepping: 0xa)
[    0.220022] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.240002] ... version:                2
[    0.244001] ... bit width:              40
[    0.248001] ... generic registers:      2
[    0.252001] ... value mask:             000000ffffffffff
[    0.256001] ... max period:             000000007fffffff
[    0.260000] ... fixed-purpose events:   3
[    0.264000] ... event mask:             0000000700000003
[    0.268650] x86: Booting SMP configuration:
[    0.272002] .... node  #0, CPUs:      #1
[    0.012000] microcode: CPU1 microcode updated early to revision 0xa0b, date = 2010-09-28
[    0.012000] mce: [Hardware Error]: Machine check events logged
[    0.472450]  #2
[    0.012000] microcode: CPU2 microcode updated early to revision 0xa0b, date = 2010-09-28
[    0.526212] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.692141]  #3
[    0.012000] microcode: CPU3 microcode updated early to revision 0xa0b, date = 2010-09-28
[    0.815952] x86: Booted up 1 node, 4 CPUs
[    0.816002] smpboot: Total of 4 processors activated (21332.50 BogoMIPS)
[    0.823205] devtmpfs: initialized
[    0.831336] PM: Registering ACPI NVS region [mem 0xcff7e000-0xcffcffff] (335872 bytes)
[    0.832101] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.836067] pinctrl core: initialized pinctrl subsystem
[    0.840158] NET: Registered protocol family 16
[    0.856006] cpuidle: using governor ladder
[    0.872005] cpuidle: using governor menu
[    0.876065] ACPI: bus type PCI registered
[    0.880002] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.884088] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.888002] PCI: not using MMCONFIG
[    0.892001] PCI: Using configuration type 1 for base access
[    0.912112] ACPI: Added _OSI(Module Device)
[    0.916003] ACPI: Added _OSI(Processor Device)
[    0.920002] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.924001] ACPI: Added _OSI(Processor Aggregator Device)
[    0.929848] ACPI: Executed 1 blocks of module-level executable AML code
[    0.947378] ACPI: Dynamic OEM Table Load:
[    0.954186] ACPI: SSDT 0xFFFF880225C64400 000235 (v01 DpgPmm P001Ist  00000011 INTL 20060113)
[    0.964423] ACPI: Dynamic OEM Table Load:
[    0.974186] ACPI: SSDT 0xFFFF880225C64000 000235 (v01 DpgPmm P002Ist  00000012 INTL 20060113)
[    0.984422] ACPI: Dynamic OEM Table Load:
[    0.996003] ACPI: SSDT 0xFFFF880225CB9C00 000235 (v01 DpgPmm P003Ist  00000012 INTL 20060113)
[    1.006608] ACPI: Dynamic OEM Table Load:
[    1.014186] ACPI: SSDT 0xFFFF880225CB9800 000235 (v01 DpgPmm P004Ist  00000012 INTL 20060113)
[    1.024382] ACPI: Interpreter enabled
[    1.028009] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150818/hwxface-580)
[    1.040013] ACPI: (supports S0 S1 S3 S4 S5)
[    1.044001] ACPI: Using IOAPIC for interrupt routing
[    1.048031] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    1.052870] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    1.056005] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[    1.064117] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.075115] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    1.076006] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    1.080004] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    1.084233] PCI host bridge to bus 0000:00
[    1.088003] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.092002] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    1.096002] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    1.100002] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    1.104001] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    1.108002] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff window]
[    1.112002] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff window]
[    1.116029] DMAR: Forcing write-buffer flush capability
[    1.120001] DMAR: Disabling IOMMU for graphics on this chipset
[    1.124146] pci 0000:00:01.0: System wakeup disabled by ACPI
[    1.128179] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    1.132160] pci 0000:00:1a.1: System wakeup disabled by ACPI
[    1.136162] pci 0000:00:1a.2: System wakeup disabled by ACPI
[    1.140847] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    1.144302] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    1.148162] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    1.152161] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    1.156167] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    1.160158] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    1.164159] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    1.168179] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    1.172119] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    1.176124] pci 0000:00:1f.0: can't claim BAR 13 [io  0x0800-0x087f]: address conflict with ACPI CPU throttle [io  0x0810-0x0815]
[    1.180005] pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
[    1.184003] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[    1.188004] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
[    1.196069] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.200052] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    1.204244] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    1.208008] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    1.220018] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    1.224348] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    1.228695] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    1.267377] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    1.296049] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    1.334232] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    1.368050] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.410230] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[    1.444049] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    1.482231] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    1.516056] ACPI: Enabled 3 GPEs in block 00 to 3F
[    1.520085] vgaarb: setting as boot device: PCI:0000:01:00.0
[    1.524000] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    1.684007] vgaarb: loaded
[    1.720002] vgaarb: bridge control possible 0000:01:00.0
[    1.780154] PCI: Using ACPI for IRQ routing
[    1.837482] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    1.920004] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    1.982184] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    2.056032] clocksource: Switched to clocksource hpet
[    2.124629] pnp: PnP ACPI init
[    2.161320] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    2.240728] system 00:02: [io  0x0290-0x029f] has been reserved
[    2.311746] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    2.382630] system 00:03: [io  0x0800-0x087f] could not be reserved
[    2.457615] system 00:03: [io  0x0500-0x057f] could not be reserved
[    2.532597] system 00:03: [mem 0xfed08000-0xfed08fff] has been reserved
[    2.611741] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    2.690885] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[    2.770029] system 00:03: [mem 0xfed50000-0xfed8ffff] has been reserved
[    2.849281] system 00:04: [mem 0xffc00000-0xffdfffff] has been reserved
[    2.928758] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    3.012144] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    3.091434] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    3.170797] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[    3.254151] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved
[    3.337454] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[    3.420757] system 00:09: [mem 0x00100000-0xcfffffff] could not be reserved
[    3.504062] system 00:09: [mem 0xe0000000-0xffffffff] could not be reserved
[    3.587485] pnp: PnP ACPI: found 10 devices
[    3.644106] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    3.750381] pci 0000:00:1f.0: BAR 13: [io  size 0x0080] has bogus alignment
[    3.833781] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff]
[    3.916113] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
[    4.009816] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
[    4.103519] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    4.177461] pci 0000:00:01.0: PCI bridge to [bus 01]
[    4.236845] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    4.309750] pci 0000:00:01.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    4.390974] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    4.483640] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    4.543022] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    4.615927] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf03fffff]
[    4.697150] pci 0000:00:1c.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    4.789817] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    4.849200] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    4.922109] pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
[    5.003333] pci 0000:00:1c.4:   bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[    5.095999] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    5.155382] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    5.228286] pci 0000:00:1c.5:   bridge window [mem 0xfe900000-0xfe9fffff]
[    5.309509] pci 0000:00:1c.5:   bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
[    5.402175] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    5.461557] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    5.534463] pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    5.615836] NET: Registered protocol family 2
[    5.668203] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    5.754858] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    5.835433] TCP: Hash tables configured (established 65536 bind 65536)
[    5.913609] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    5.986589] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    6.064880] NET: Registered protocol family 1
[    6.117316] Unpacking initramfs...
[    6.446140] Freeing initrd memory: 16180K (ffff880036056000 - ffff880037023000)
[    6.533759] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    6.610866] software IO TLB [mem 0xcbf70000-0xcff70000] (64MB) mapped at [ffff8800cbf70000-ffff8800cff6ffff]
[    6.728651] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa0b
[    6.800550] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa0b
[    6.872416] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa0b
[    6.944278] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa0b
[    7.016208] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    7.121743] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    7.195809] audit: initializing netlink subsys (disabled)
[    7.260466] audit: type=2000 audit(1454991686.260:1): initialized
[    7.333837] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    7.409906] zbud: loaded
[    7.440310] VFS: Disk quotas dquot_6.6.0
[    7.487291] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    7.570358] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    7.658947] io scheduler noop registered
[    7.705872] io scheduler deadline registered
[    7.756938] tsc: Refined TSC clocksource calibration: 2666.363 MHz
[    7.830893] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x266f1e753c0, max_idle_ns: 440795206381 ns
[    7.950580] io scheduler cfq registered (default)
[    7.950954] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[    7.951491] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    7.951498] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    7.951563] GHES: HEST is not enabled!
[    7.951628] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    8.027141] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    8.100405] Linux agpgart interface v0.103
[    8.100533] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    8.100533] AMD IOMMUv2 functionality not available on this system
[    8.246014] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    8.246015] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    8.246696] serio: i8042 KBD port at 0x60,0x64 irq 1
[    8.246801] mousedev: PS/2 mouse device common for all mice
[    8.246853] rtc_cmos 00:01: RTC can wake from S4
[    8.247000] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    8.247029] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    8.247043] ledtrig-cpu: registered to indicate activity on CPUs
[    8.365639] NET: Registered protocol family 10
[    8.365838] mip6: Mobile IPv6
[    8.365841] NET: Registered protocol family 17
[    8.365846] mpls_gso: MPLS GSO support
[    8.366185] registered taskstats version 1
[    8.366216] zswap: loaded using pool lzo/zbud
[    8.453093] rtc_cmos 00:01: setting system clock to 2016-02-09 04:21:43 UTC (1454991703)
[    8.502125] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    9.757702] Freeing unused kernel memory: 1296K (ffffffff81b08000 - ffffffff81c4c000)
[    9.851482] Write protecting the kernel read-only data: 10240k
[    9.921571] Freeing unused kernel memory: 456K (ffff88000158e000 - ffff880001600000)
[   10.014668] Freeing unused kernel memory: 1300K (ffff8800018bb000 - ffff880001a00000)
Loading, please [   10.118925] random: systemd-udevd urandom read with 8 bits of entropy available
wait...
startin[   10.221967] ACPI: bus type USB registered
g version 228
[   10.277645] usbcore: registered new interface driver usbfs
[   10.277861] SCSI subsystem initialized
[   10.403728] usbcore: registered new interface driver hub
[   10.467380] usbcore: registered new device driver usb
[   10.528200] skge: 1.14 addr 0xfebfc000 irq 18 chip Yukon-Lite rev 9
[   10.603411] skge 0000:05:02.0 eth0: addr 00:22:15:17:1f:e0
[   10.669746] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   10.670279] sky2: driver version 1.30
[   10.670399] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 3
[   10.671111] sky2 0000:02:00.0 eth1: addr 00:22:15:17:07:62
[   10.676752] skge 0000:05:02.0 enp5s2: renamed from eth0
[   10.991181] ehci-pci: EHCI PCI platform driver
[   11.044465] uhci_hcd: USB Universal Host Controller Interface driver
[   11.044636] ehci-pci 0000:00:1a.7: EHCI Host Controller
[   11.044648] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[   11.044653] sky2 0000:02:00.0 enp2s0: renamed from eth1
[   11.044670] ehci-pci 0000:00:1a.7: debug port 1
[   11.044830] clocksource: Switched to clocksource tsc
[   11.048680] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe7ffc00
[   11.060008] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[   11.060047] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   11.060048] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   11.060049] usb usb1: Product: EHCI Host Controller
[   11.060051] usb usb1: Manufacturer: Linux 4.3.0-1-amd64 ehci_hcd
[   11.060052] usb usb1: SerialNumber: 0000:00:1a.7
[   11.060190] hub 1-0:1.0: USB hub found
[   11.060196] hub 1-0:1.0: 6 ports detected
[   11.060454] ehci-pci 0000:00:1d.7: EHCI Host Controller
[   11.060459] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[   11.060472] ehci-pci 0000:00:1d.7: debug port 1
[   11.064389] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe7ff800
[   11.076007] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[   11.076039] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[   11.076041] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   11.076042] usb usb2: Product: EHCI Host Controller
[   11.076043] usb usb2: Manufacturer: Linux 4.3.0-1-amd64 ehci_hcd
[   11.076044] usb usb2: SerialNumber: 0000:00:1d.7
[   11.076153] hub 2-0:1.0: USB hub found
[   11.076159] hub 2-0:1.0: 6 ports detected
[   11.372007] usb 1-3: new high-speed USB device number 2 using ehci-pci
[   11.500044] firewire_ohci 0000:05:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[   11.665729] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[   11.665774] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[   11.665776] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[   11.705525] scsi host0: ahci
[   11.705733] scsi host1: ahci
[   11.705927] scsi host2: ahci
[   11.706117] scsi host3: ahci
[   11.706303] scsi host4: ahci
[   11.706490] scsi host5: ahci
[   11.706641] ata1: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7fe900 irq 29
[   11.706643] ata2: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7fe980 irq 29
[   11.706645] ata3: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7fea00 irq 29
[   11.706647] ata4: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7fea80 irq 29
[   11.706649] ata5: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7feb00 irq 29
[   11.706652] ata6: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7feb80 irq 29
[   12.004091] firewire_core 0000:05:03.0: created device fw0: GUID 001e8c00014cb3ab, S400
[   12.181354] usb 1-3: New USB device found, idVendor=058f, idProduct=6362
[   12.181355] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   12.181357] usb 1-3: Product: Mass Storage Device
[   12.181358] usb 1-3: Manufacturer: Generic
[   12.181359] usb 1-3: SerialNumber: 058F63626376
[   12.196019] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   12.196540] ata1.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133
[   12.196541] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   12.235159] ata1.00: configured for UDMA/133
[   12.235296] scsi 0:0:0:0: Direct-Access     ATA      ST3250410AS      C    PQ: 0 ANSI: 5
[   12.597788] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[   12.597837] sd 0:0:0:0: [sda] Write Protect is off
[   12.597855] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   12.628020] ata2: SATA link down (SStatus 0 SControl 300)
[   12.697384]  sda: sda1 sda2 sda3
[   12.697910] sd 0:0:0:0: [sda] Attached SCSI disk
[   12.769501] usb-storage 1-3:1.0: USB Mass Storage device detected
[   12.769565] scsi host6: usb-storage 1-3:1.0
[   12.769638] usbcore: registered new interface driver usb-storage
[   13.090198] usbcore: registered new interface driver uas
[   13.120015] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   13.121071] ata3.00: ATAPI: Optiarc DVD RW AD-7200S, 1.0B, max UDMA/100
[   13.188019] ata3.00: configured for UDMA/100
[   13.232021] floppy0: no floppy controllers found
[   13.232030] work still pending
[   13.330705] scsi 2:0:0:0: CD-ROM            Optiarc  DVD RW AD-7200S  1.0B PQ: 0 ANSI: 5
[   13.656018] ata4: SATA link down (SStatus 0 SControl 300)
[   13.947329] sr 2:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[   13.947330] cdrom: Uniform CD-ROM driver Revision: 3.20
[   13.976016] ata5: SATA link down (SStatus 0 SControl 300)
[   14.295228] scsi 6:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[   14.296025] ata6: SATA link down (SStatus 0 SControl 300)
[   14.454751] scsi 6:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[   14.596303] scsi 6:0:0:2: Direct-Access     Generic  USB xD/SM Reader 1.02 PQ: 0 ANSI: 0
[   14.727623] scsi 6:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[   16.635743] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[   16.698360] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[   16.786954] uhci_hcd 0000:00:1a.0: detected 2 ports
[   16.845455] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[   16.914299] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[   16.995560] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   17.081989] usb usb3: Product: UHCI Host Controller
[   17.140325] usb usb3: Manufacturer: Linux 4.3.0-1-amd64 uhci_hcd
[   17.212196] usb usb3: SerialNumber: 0000:00:1a.0
[   17.267580] hub 3-0:1.0: USB hub found
[   17.312506] hub 3-0:1.0: 2 ports detected
[   17.360748] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[   17.423325] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[   17.511887] uhci_hcd 0000:00:1a.1: detected 2 ports
[   17.570302] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[   17.639167] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[   17.720439] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   17.806875] usb usb4: Product: UHCI Host Controller
[   17.865205] usb usb4: Manufacturer: Linux 4.3.0-1-amd64 uhci_hcd
[   17.937073] usb usb4: SerialNumber: 0000:00:1a.1
[   17.992437] hub 4-0:1.0: USB hub found
[   18.037336] hub 4-0:1.0: 2 ports detected
[   18.085456] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[   18.147995] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[   18.236522] uhci_hcd 0000:00:1a.2: detected 2 ports
[   18.294963] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00
[   18.363853] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[   18.445117] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   18.531538] usb usb5: Product: UHCI Host Controller
[   18.589878] usb usb5: Manufacturer: Linux 4.3.0-1-amd64 uhci_hcd
[   18.661745] usb usb5: SerialNumber: 0000:00:1a.2
[   18.717113] hub 5-0:1.0: USB hub found
[   18.762006] hub 5-0:1.0: 2 ports detected
[   18.810119] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   18.872662] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[   18.961201] uhci_hcd 0000:00:1d.0: detected 2 ports
[   19.019629] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[   19.088497] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[   19.169782] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   19.256216] usb usb6: Product: UHCI Host Controller
[   19.314560] usb usb6: Manufacturer: Linux 4.3.0-1-amd64 uhci_hcd
[   19.386417] usb usb6: SerialNumber: 0000:00:1d.0
[   19.441787] hub 6-0:1.0: USB hub found
[   19.486683] hub 6-0:1.0: 2 ports detected
[   19.534805] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   19.597337] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[   19.685886] uhci_hcd 0000:00:1d.1: detected 2 ports
[   19.744299] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[   19.813071] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[   19.894359] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   19.980780] usb usb7: Product: UHCI Host Controller
[   20.039125] usb usb7: Manufacturer: Linux 4.3.0-1-amd64 uhci_hcd
[   20.110989] usb usb7: SerialNumber: 0000:00:1d.1
[   20.166348] hub 7-0:1.0: USB hub found
[   20.211250] hub 7-0:1.0: 2 ports detected
[   20.259368] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   20.321910] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[   20.410449] uhci_hcd 0000:00:1d.2: detected 2 ports
[   20.468871] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[   20.537756] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[   20.619025] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   20.705451] usb usb8: Product: UHCI Host Controller
[   20.763790] usb usb8: Manufacturer: Linux 4.3.0-1-amd64 uhci_hcd
[   20.835662] usb usb8: SerialNumber: 0000:00:1d.2
[   20.891007] hub 8-0:1.0: USB hub found
[   20.935924] hub 8-0:1.0: 2 ports detected
[   20.988609] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   21.054355] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[   21.120234] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[   21.186239] sd 6:0:0:3: [sde] Attached SCSI removable disk
[   21.253150] scsi host7: pata_marvell
[   21.296137] scsi host8: pata_marvell
[   21.332015] usb 8-1: new low-speed USB device number 2 using uhci_hcd
[   21.416054] ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
[   21.501483] ata8: PATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
[   21.611750] usb 8-1: New USB device found, idVendor=045e, idProduct=0040
[   21.692006] usb 8-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[   21.777388] usb 8-1: Product: Microsoft 3-Button Mouse with IntelliEye(tm)
[   21.859648] usb 8-1: Manufacturer: Microsoft
[   21.914910] hidraw: raw HID events driver © Jiri Kosina
[   21.979565] random: nonblocking pool is initialized
[   22.065018] usbcore: registered new interface driver usbhid
[   22.131725] usbhid: USB HID core driver
[   22.178288] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(tm) as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/0003:045E:0040.0001/input/input1
[   22.349070] hid-generic 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(tm)] on usb-0000:00:1d.2-1/input0
Begin: Loading e[   22.724755] PM: Starting manual resume from disk
ssential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Checking root file system ... fsck from util-linux 2.27.1
/dev/sda1: re[   23.086837] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
covering journal
/dev/sda1: clean, 81537/610800 files, 1586458/2441216 blocks
done.
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[   23.900324] systemd[1]: systemd 228 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[   24.115876] systemd[1]: Detected architecture x86-64.

Welcome to [1mDebian GNU/Linux stretch/sid[0m!

[   24.257279] systemd[1]: Set hostname to <dmytruk1>.
[   25.297973] systemd[1]: Created slice System Slice.
[[0;32m  OK  [0m] Created slice System Slice.
[   25.412153] systemd[1]: Listening on Journal Socket.
[[0;32m  OK  [0m] Listening on Journal Socket.
[   25.528603] systemd[1]: Mounting Huge Pages File System...
         Mounting Huge Pages File System...
[   25.648056] systemd[1]: Reached target Encrypted Volumes.
[[0;32m  OK  [0m] Reached target Encrypted Volumes.
[   25.776188] systemd[1]: Created slice system-getty.slice.
[[0;32m  OK  [0m] Created slice system-getty.slice.
[   25.904092] systemd[1]: Listening on Journal Socket (/dev/log).
[[0;32m  OK  [0m] Listening on Journal Socket (/dev/log).
[   26.040137] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[[0;32m  OK  [0m] Created slice system-systemd\x2dfsck.slice.
[   26.188216] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[[0;32m  OK  [0m] Set up automount Arbitrary Executab...ats File System Automount Point.
[   26.404142] systemd[1]: Created slice system-serial\x2dgetty.slice.
[[0;32m  OK  [0m] Created slice system-serial\x2dgetty.slice.
[   26.552074] systemd[1]: Listening on udev Kernel Socket.
[[0;32m  OK  [0m] Listening on udev Kernel Socket.
[   26.692414] systemd[1]: Reached target Remote File Systems (Pre).
[[0;32m  OK  [0m] Reached target Remote File Systems (Pre).
[   26.836052] systemd[1]: Reached target Remote File Systems.
[[0;32m  OK  [0m] Reached target Remote File Systems.
[   26.964553] systemd[1]: Mounting Debug File System...
         Mounting Debug File System...
[   27.072103] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[[0;32m  OK  [0m] Listening on /dev/initctl Compatibility Named Pipe.
[   27.236500] systemd[1]: Mounting POSIX Message Queue File System...
         Mounting POSIX Message Queue File System...
[   27.368093] systemd[1]: Listening on Syslog Socket.
[[0;32m  OK  [0m] Listening on Syslog Socket.
[   27.480135] systemd[1]: Listening on Journal Audit Socket.
[[0;32m  OK  [0m] Listening on Journal Audit Socket.
[   27.608497] systemd[1]: Starting LSB: Set console font and keymap...
         Starting LSB: Set console font and keymap...
[   27.748137] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[[0;32m  OK  [0m] Started Forward Password Requests to Wall Directory Watch.
[   27.928176] systemd[1]: Created slice User and Session Slice.
[[0;32m  OK  [0m] Created slice User and Session Slice.
[   28.060056] systemd[1]: Reached target Slices.
[[0;32m  OK  [0m] Reached target Slices.
[   28.160087] systemd[1]: Listening on fsck to fsckd communication Socket.
[[0;32m  OK  [0m] Listening on fsck to fsckd communication Socket.
[   28.342124] systemd[1]: Starting Load Kernel Modules...
         Starting Load Kernel Modules...
[   28.452604] systemd[1]: Starting Create list of required static device nodes for the current kernel...
         Starting Create list of required st... nodes for the current kernel...
[   28.652672] systemd[1]: Starting Journal Service...
         Starting Journal Service...
[   28.756162] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[[0;32m  OK  [0m] Started Dispatch Password Requests to Console Directory Watch.
[   28.940074] systemd[1]: Reached target Paths.
[[0;32m  OK  [0m] Reached target Paths.
[   29.040129] systemd[1]: Listening on udev Control Socket.
[[0;32m  OK  [0m] Listening on udev Control Socket.
[   29.169297] systemd[1]: Mounted Huge Pages File System.
[[0;32m  OK  [0m] Mounted Huge Pages File System.
[   29.288086] systemd[1]: Mounted Debug File System.
[[0;32m  OK  [0m] Mounted Debug File System.
[   29.400068] systemd[1]: Mounted POSIX Message Queue File System.
[[0;32m  OK  [0m] Mounted POSIX Message Queue File System.
[   29.544142] systemd[1]: Started Journal Service.
[[0;32m  OK  [0m] Started Journal Service.
[[0;32m  OK  [0m] Started Load Kernel Modules.
[[0;32m  OK  [0m] Started Create list of required sta...ce nodes for the current kernel.
         Starting Create Static Device Nodes in /dev...
         Starting Apply Kernel Variables...
[[0;32m  OK  [0m] Started Apply Kernel Variables.
[[0;32m  OK  [0m] Started Create Static Device Nodes in /dev.
         Starting udev Kernel Device Manager...
[[0;32m  OK  [0m] Started udev Kernel Device Manager.
         Starting LSB: Tune IDE hard disks...
         Starting LSB: Set preliminary keymap...
[[0;32m  OK  [0m] Started LSB: Tune IDE hard disks.
[[0;32m  OK  [0m] Started LSB: Set console font and keymap.
[[0;32m  OK  [0m] Started LSB: Set preliminary keymap.
         Starting Remount Root a[   30.937190] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
nd Kernel File Systems...
[[0;32m  OK  [0m] Started Remount Root and Kernel File Systems.
         Starting udev Coldplug all Devices...
         Starting Flush Journal to Persistent Storage...
[[0;32m  OK  [0m] Reached target Local File Systems (Pre).
         Starting Load/Save Random Seed...
[[0;32m  OK  [0m] Started Load/Save Random Seed.
[[0;32m  OK  [0m] Started udev Coldplug all Devices.
[   31.492446] systemd-journald[216]: Received request to flush runtime journal from PID 1
[[0;32m  OK  [0m] Started Flush Journal to Persistent Storage.
[   31.710372] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[   31.810409] ACPI: Power Button [PWRB]
[   31.854362] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   31.943534] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   31.944016] ACPI: Power Button [PWRF]
[   32.216240] ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041F conflicts with OpRegion 0x0000000000000400-0x000000000000040F (\SMRG) (20150818/utaddress-254)
[   32.401788] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   32.401936] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   32.401972] sr 2:0:0:0: Attached scsi generic sg1 type 5
[   32.402008] sd 6:0:0:0: Attached scsi generic sg2 type 0
[   32.402040] sd 6:0:0:1: Attached scsi generic sg3 type 0
[   32.402074] sd 6:0:0:2: Attached scsi generic sg4 type 0
[   32.402107] sd 6:0:0:3: Attached scsi generic sg5 type 0
[   32.905187] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20150818/utaddress-254)
[   33.090907] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   33.212720] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20150818/utaddress-254)
[   33.370281] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   33.476433] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   33.598238] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20150818/utaddress-254)
[   33.598239] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   33.598240] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   33.598457] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   33.598494] [drm] Initialized drm 1.1.0 20060810
[   33.979712] iTCO_vendor_support: vendor-support=0
[[0;32m  OK  [0m] Found device[   34.191106] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
 /dev/ttyS0.
[   34.274244] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[   34.373331] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[[0;32m  OK  [[   34.452656] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input5
0m] Found device[   34.585969] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1989B: line_outs=4 (0x12/0x16/0x24/0x25/0x0) type:line
 88E8056 PCI-E G[   34.728540] snd_hda_codec_analog hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
igabit Ethernet [   34.838880] snd_hda_codec_analog hdaudioC0D0:    hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
Controller (Moth[   34.945040] snd_hda_codec_analog hdaudioC0D0:    mono: mono_out=0x0
erboard).
[   35.036648] snd_hda_codec_analog hdaudioC0D0:    dig-out=0x1b/0x1d
[   35.122027] snd_hda_codec_analog hdaudioC0D0:    inputs:
[   35.185661] snd_hda_codec_analog hdaudioC0D0:      Front Mic=0x14
[   35.185826] floppy0: no floppy controllers found
   35.185840] work still pending
   35.349315] snd_hda_codec_analog hdaudioC0D0:      Rear Mic=0x17
[   35.420189] snd_hda_codec_analog hdaudioC0D0:      Line=0x15
[   35.487920] snd_hda_codec_analog hdaudioC0D0:      CD=0x18
[[0;32m  OK  [[   35.558578] [drm] radeon kernel modesetting enabled.
0m] Found device 88E8001 Gigabit[   35.648423] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
 Ethern...bit Et[   35.764469] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
hernet Controlle[   35.882850] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
r (Asus)).
[   35.995562] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   36.114993] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   36.226571] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   36.227171] CRAT table not found
[   36.227172] Finished initializing topology ret=0
[   36.227402] kfd kfd: Initialized module
[[0;32m  OK  [[   36.475791] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
0m] Found device ST3250410AS 3.
         Activat[   36.650905] [drm] initializing kernel modesetting (RV670 0x1002:0x9501 0x1787:0x2003).
ing swap /dev/di[   36.748213] [drm] register mmio base: 0xFE8E0000
sk/by-uuid/5...7[   36.820043] [drm] register mmio size: 65536
-7bb3-4efe-897b-[   36.886835] ATOM BIOS: RV670XT
229fad9ce82e...
[   36.939879] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)

[   37.060610] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[   37.152233] [drm] Detected VRAM RAM=512M, BAR=256M
[   37.209621] [drm] RAM width 256bits DDR
[   37.255588] [TTM] Zone  kernel: Available graphics memory: 4089610 kiB
[   37.333706] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[   37.333707] [TTM] Initializing pool allocator
[   37.333748] [TTM
Спасибо сказали:

Аватара пользователя
yars
Сообщения: 1144
Статус: Slacker!
ОС: Slackware64-current

Re: ATI HD 3000 + kernel 3.16

Сообщение yars »

А еще Xorg.0.log{,old}, пожалуйста.
Slackware64-current/Xfce 4.12/Acer TravelMate 5760
-------------
Registered Linux User #557010
Спасибо сказали:

ava297
Сообщения: 6
ОС: Debian GNU/Linux (testing)

Re: ATI HD 3000 + kernel 3.16

Сообщение ava297 »

yars писал(а):
09.02.2016 16:38
А еще Xorg.0.log{,old}, пожалуйста.

Xorg.log выложу после работы, компьютер домашний.
Но это только с опцией nomodeset (radeon.modeset=0).
Система без этих опций виснет до запуска иксов, на инициализации оборудования ядром.
И лог загрузки смог получить только с помощью другого компьютера и связью через последовательный порт.
Или я может ошибаюсь?
Проводил еще такой эксперимент:
Загружался в систему с опцией nomodeset.
И под рутом исполнял команду # modprobe radeon modeset=1
В результате - моментальное зависание системы, клавиатура тоже не работает.
Помогает только Hard Reset.

Нашел похожий баг, у меня все тоже самое, только система Debian x64 и видеокарта HD3870.
https://bugs.freedesktop.org/show_bug.cgi?id=70514

Еще хочу сказать, что проблема эта тянеться давно, еще как Debian 8 Jessie был тестингом.
Все руки не доходили заняться этой проблемой.
До этого времени сидел на Debian 7 Wheezy с драйвером fglrx-legacy. Там HD3870 работает нормально.
Но так как компьютер домашний, хочеться софт посвежее.
Спасибо сказали:

Аватара пользователя
Olej
Сообщения: 659
ОС: Fedora, Mint, Debian, QNX

Re: ATI HD 3000 + kernel 3.16

Сообщение Olej »

ava297 писал(а):
10.02.2016 12:49
Проводил еще такой эксперимент:
Загружался в систему с опцией nomodeset.
И под рутом исполнял команду # modprobe radeon modeset=1
В результате - моментальное зависание системы, клавиатура тоже не работает.
Помогает только Hard Reset.

Вообще то, это типичная картина, когда ипользуемый модуль ядра не поддерживает конкретную модель оборудования, но системой имено он (по VID:PID) устанавливается для поддержки неподдерживаемого оборудования (впихать нвпихуемое :unsure: ).
Такое почти всегда происходит с новыми чипами WiFi Broadcom.
Попробуйте поискать специфичный мдуль для этого типа, или этой группы оборудования (конечно, среди проприетарных или сторонних).
Спасибо сказали:

Аватара пользователя
Olej
Сообщения: 659
ОС: Fedora, Mint, Debian, QNX

Re: ATI HD 3000 + kernel 3.16

Сообщение Olej »

ava297 писал(а):
09.02.2016 09:26
Подниму тему.
Видеокарта HIS HD 3870 IceQ 3 Turbo 512MB (256bit) GDDR4 PCIe (чип RV670).

Вы бы, поднимая тему :rolleyes: , начинали не с торгового названия модели вашей видеокарты, а с её VID:PID, каким-то вот таким образом:

Код: Выделить всё

olej@nvidia ~ $ lspci -n | grep 01:00.0
01:00.0 0300: 10de:1040 (rev a1)

(это я показал для своей NVIDIA, но вы сообразите параметр для grep по вашим приводимым ранее простыняи :rolleyes: )
Спасибо сказали:

ava297
Сообщения: 6
ОС: Debian GNU/Linux (testing)

Re: ATI HD 3000 + kernel 3.16

Сообщение ava297 »

#lspci -nnn | grep VGA
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV670 [Radeon HD 3870] [1002:9501]

Загрузка системы с опцией nomodeset

dmesg.log

Код: Выделить всё

[    0.000000] microcode: CPU0 microcode updated early to revision 0xa0b, date = 2010-09-28
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.3.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.3.1 20160114 (Debian 5.3.1-6) ) #1 SMP Debian 4.3.3-7 (2016-01-19)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.3.0-1-amd64 root=UUID=fe96a00f-4fa0-4721-a2f8-3d0ae7fb924e ro nomodeset quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 0x240 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff6ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cff70000-0x00000000cff7dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cff7e000-0x00000000cffcffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cffd0000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001ffffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: System manufacturer P5Q DELUXE/P5Q DELUXE, BIOS 2301    07/10/2009
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x200000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DFFFF write-protect
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 0D0000000 mask FF0000000 uncachable
[    0.000000]   2 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT
[    0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcff70 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01d24000, 0x01d24fff] PGTABLE
[    0.000000] BRK [0x01d25000, 0x01d25fff] PGTABLE
[    0.000000] BRK [0x01d26000, 0x01d26fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x1ffe00000-0x1ffffffff]
[    0.000000]  [mem 0x1ffe00000-0x1ffffffff] page 2M
[    0.000000] BRK [0x01d27000, 0x01d27fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x1e0000000-0x1ffdfffff]
[    0.000000]  [mem 0x1e0000000-0x1ffdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xcff6ffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xcfdfffff] page 2M
[    0.000000]  [mem 0xcfe00000-0xcff6ffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1dfffffff]
[    0.000000]  [mem 0x100000000-0x1dfffffff] page 2M
[    0.000000] BRK [0x01d28000, 0x01d28fff] PGTABLE
[    0.000000] BRK [0x01d29000, 0x01d29fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x36056000-0x37022fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FAFF0 000024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 0x00000000CFF70100 00005C (v01 A_M_I_ OEMXSDT  07000910 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000CFF70290 0000F4 (v03 A_M_I_ OEMFACP  07000910 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000CFF70440 009721 (v01 A0999  A0999001 00000001 INTL 20060113)
[    0.000000] ACPI: FACS 0x00000000CFF7E000 000040
[    0.000000] ACPI: FACS 0x00000000CFF7E000 000040
[    0.000000] ACPI: APIC 0x00000000CFF70390 00006C (v01 A_M_I_ OEMAPIC  07000910 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000CFF70400 00003C (v01 A_M_I_ OEMMCFG  07000910 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000CFF7E040 000089 (v01 A_M_I_ AMI_OEM  07000910 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000CFF79B70 000038 (v01 A_M_I_ OEMHPET  07000910 MSFT 00000097)
[    0.000000] ACPI: OSFR 0x00000000CFF79BB0 0000B0 (v01 A_M_I_ OEMOSFR  07000910 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000CFF7E9D0 000A7C (v01 DpgPmm CpuPm    00000012 INTL 20060113)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001ffffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x1ffff7000-0x1ffffafff]
[    0.000000]  [ffffea0000000000-ffffea0007ffffff] PMD -> [ffff8801f8200000-ffff8801ff5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000cff6ffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001ffffffff]
[    0.000000] On node 0 totalpages: 1900301
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13246 pages used for memmap
[    0.000000]   DMA32 zone: 847728 pages, LIFO batch:31
[    0.000000]   Normal zone: 16384 pages used for memmap
[    0.000000]   Normal zone: 1048576 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcff70000-0xcff7dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xcff7e000-0xcffcffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcffd0000-0xcfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[    0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 32 pages/cpu @ffff8801ffc00000 s93016 r8192 d29864 u524288
[    0.000000] pcpu-alloc: s93016 r8192 d29864 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1870586
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.3.0-1-amd64 root=UUID=fe96a00f-4fa0-4721-a2f8-3d0ae7fb924e ro nomodeset quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7385828K/7601204K available (5675K kernel code, 1050K rwdata, 2796K rodata, 1296K init, 836K bss, 215376K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     Build-time adjustment of leaf fanout to 64.
[    0.000000]     RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:456 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2666.646 MHz processor
[    0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.29 BogoMIPS (lpj=10666584)
[    0.004013] pid_max: default: 32768 minimum: 301
[    0.004021] ACPI: Core revision 20150818
[    0.013247] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.013276] Security Framework initialized
[    0.013278] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.013286] AppArmor: AppArmor disabled by boot time parameter
[    0.013879] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.017040] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.018534] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.018548] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.018896] Initializing cgroup subsys io
[    0.018905] Initializing cgroup subsys memory
[    0.018911] Initializing cgroup subsys devices
[    0.018915] Initializing cgroup subsys freezer
[    0.018918] Initializing cgroup subsys net_cls
[    0.018922] Initializing cgroup subsys perf_event
[    0.018925] Initializing cgroup subsys net_prio
[    0.018950] CPU: Physical Processor ID: 0
[    0.018951] CPU: Processor Core ID: 0
[    0.018953] mce: CPU supports 6 MCE banks
[    0.018961] CPU0: Thermal monitoring enabled (TM2)
[    0.018964] process: using mwait in idle threads
[    0.018969] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.018970] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.019277] Freeing SMP alternatives memory: 20K (ffffffff81c4c000 - ffffffff81c51000)
[    0.024004] ftrace: allocating 23625 entries in 93 pages
[    0.032424] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.076000] APIC calibration not consistent with PM-Timer: 120ms instead of 100ms
[    0.076000] APIC delta adjusted to PM-Timer: 2083094 (2508566)
[    0.076000] smpboot: CPU0: Intel® Core(tm)2 Quad CPU    Q9400  @ 2.66GHz (family: 0x6, model: 0x17, stepping: 0xa)
[    0.076000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.076000] ... version:                2
[    0.076000] ... bit width:              40
[    0.076000] ... generic registers:      2
[    0.076000] ... value mask:             000000ffffffffff
[    0.076000] ... max period:             000000007fffffff
[    0.076000] ... fixed-purpose events:   3
[    0.076000] ... event mask:             0000000700000003
[    0.076000] x86: Booting SMP configuration:
[    0.076000] .... node  #0, CPUs:      #1
[    0.008000] microcode: CPU1 microcode updated early to revision 0xa0b, date = 2010-09-28
[    0.086151] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.086277]  #2
[    0.008000] microcode: CPU2 microcode updated early to revision 0xa0b, date = 2010-09-28
[    0.104122]  #3
[    0.008000] microcode: CPU3 microcode updated early to revision 0xa0b, date = 2010-09-28
[    0.122686] x86: Booted up 1 node, 4 CPUs
[    0.122689] smpboot: Total of 4 processors activated (21333.16 BogoMIPS)
[    0.124168] devtmpfs: initialized
[    0.130178] PM: Registering ACPI NVS region [mem 0xcff7e000-0xcffcffff] (335872 bytes)
[    0.130178] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.130178] pinctrl core: initialized pinctrl subsystem
[    0.130178] NET: Registered protocol family 16
[    0.140006] cpuidle: using governor ladder
[    0.152003] cpuidle: using governor menu
[    0.152083] ACPI: bus type PCI registered
[    0.152086] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.152190] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.152193] PCI: not using MMCONFIG
[    0.152205] PCI: Using configuration type 1 for base access
[    0.160118] ACPI: Added _OSI(Module Device)
[    0.160120] ACPI: Added _OSI(Processor Device)
[    0.160121] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.160123] ACPI: Added _OSI(Processor Aggregator Device)
[    0.161971] ACPI: Executed 1 blocks of module-level executable AML code
[    0.167920] ACPI: Dynamic OEM Table Load:
[    0.167925] ACPI: SSDT 0xFFFF8801F684C000 000235 (v01 DpgPmm P001Ist  00000011 INTL 20060113)
[    0.168353] ACPI: Dynamic OEM Table Load:
[    0.168358] ACPI: SSDT 0xFFFF8801F68AAC00 000235 (v01 DpgPmm P002Ist  00000012 INTL 20060113)
[    0.168779] ACPI: Dynamic OEM Table Load:
[    0.168784] ACPI: SSDT 0xFFFF8801F68AA800 000235 (v01 DpgPmm P003Ist  00000012 INTL 20060113)
[    0.169206] ACPI: Dynamic OEM Table Load:
[    0.169210] ACPI: SSDT 0xFFFF8801F68AA400 000235 (v01 DpgPmm P004Ist  00000012 INTL 20060113)
[    0.169593] ACPI: Interpreter enabled
[    0.169602] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150818/hwxface-580)
[    0.169615] ACPI: (supports S0 S1 S3 S4 S5)
[    0.169617] ACPI: Using IOAPIC for interrupt routing
[    0.169646] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.170517] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.170522] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[    0.170872] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.176488] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.176494] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.176499] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.176730] PCI host bridge to bus 0000:00
[    0.176733] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.176736] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.176738] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.176740] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.176742] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.176744] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff window]
[    0.176745] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff window]
[    0.176754] pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000
[    0.176774] DMAR: Forcing write-buffer flush capability
[    0.176775] DMAR: Disabling IOMMU for graphics on this chipset
[    0.176850] pci 0000:00:01.0: [8086:2e21] type 01 class 0x060400
[    0.176880] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.176922] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.176985] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[    0.177025] pci 0000:00:1a.0: reg 0x20: [io  0xa800-0xa81f]
[    0.177099] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.177145] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[    0.177184] pci 0000:00:1a.1: reg 0x20: [io  0xa880-0xa89f]
[    0.177258] pci 0000:00:1a.1: System wakeup disabled by ACPI
[    0.177303] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[    0.177344] pci 0000:00:1a.2: reg 0x20: [io  0xac00-0xac1f]
[    0.177417] pci 0000:00:1a.2: System wakeup disabled by ACPI
[    0.177470] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[    0.177495] pci 0000:00:1a.7: reg 0x10: [mem 0xfe7ffc00-0xfe7fffff]
[    0.177553] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.177595] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.177642] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[    0.177665] pci 0000:00:1b.0: reg 0x10: [mem 0xfe7f8000-0xfe7fbfff 64bit]
[    0.177712] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.177793] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[    0.177847] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.177891] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.177939] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[    0.178003] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.178048] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.178094] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
[    0.178147] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.178190] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.178237] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[    0.178277] pci 0000:00:1d.0: reg 0x20: [io  0xa080-0xa09f]
[    0.178351] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.178397] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[    0.178436] pci 0000:00:1d.1: reg 0x20: [io  0xa400-0xa41f]
[    0.178509] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.178555] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[    0.178594] pci 0000:00:1d.2: reg 0x20: [io  0xa480-0xa49f]
[    0.178668] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.178719] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[    0.178744] pci 0000:00:1d.7: reg 0x10: [mem 0xfe7ff800-0xfe7ffbff]
[    0.178802] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.178844] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.178888] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.178961] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.179007] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[    0.179082] pci 0000:00:1f.0: can't claim BAR 13 [io  0x0800-0x087f]: address conflict with ACPI CPU throttle [io  0x0810-0x0815]
[    0.179087] pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
[    0.179090] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[    0.179094] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
[    0.179182] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
[    0.179202] pci 0000:00:1f.2: reg 0x10: [io  0x9c00-0x9c07]
[    0.179209] pci 0000:00:1f.2: reg 0x14: [io  0x9880-0x9883]
[    0.179215] pci 0000:00:1f.2: reg 0x18: [io  0x9800-0x9807]
[    0.179222] pci 0000:00:1f.2: reg 0x1c: [io  0x9480-0x9483]
[    0.179228] pci 0000:00:1f.2: reg 0x20: [io  0x9400-0x941f]
[    0.179235] pci 0000:00:1f.2: reg 0x24: [mem 0xfe7fe800-0xfe7fefff]
[    0.179258] pci 0000:00:1f.2: PME# supported from D3hot
[    0.179340] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[    0.179354] pci 0000:00:1f.3: reg 0x10: [mem 0xfe7ff400-0xfe7ff4ff 64bit]
[    0.179371] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.179488] pci 0000:01:00.0: [1002:9501] type 00 class 0x030000
[    0.179509] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.179518] pci 0000:01:00.0: reg 0x18: [mem 0xfe8e0000-0xfe8effff 64bit]
[    0.179524] pci 0000:01:00.0: reg 0x20: [io  0xb000-0xb0ff]
[    0.179535] pci 0000:01:00.0: reg 0x30: [mem 0xfe8c0000-0xfe8dffff pref]
[    0.179554] pci 0000:01:00.0: supports D1 D2
[    0.179600] pci 0000:01:00.1: [1002:aa18] type 00 class 0x040300
[    0.179620] pci 0000:01:00.1: reg 0x10: [mem 0xfe8fc000-0xfe8fffff 64bit]
[    0.179660] pci 0000:01:00.1: supports D1 D2
[    0.179715] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.179718] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.179720] pci 0000:00:01.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.179724] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.179765] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.179773] pci 0000:00:1c.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.179828] pci 0000:03:00.0: [11ab:6121] type 00 class 0x01018f
[    0.179859] pci 0000:03:00.0: reg 0x10: [io  0xdc00-0xdc07]
[    0.179870] pci 0000:03:00.0: reg 0x14: [io  0xd880-0xd883]
[    0.179880] pci 0000:03:00.0: reg 0x18: [io  0xd800-0xd807]
[    0.179891] pci 0000:03:00.0: reg 0x1c: [io  0xd480-0xd483]
[    0.179901] pci 0000:03:00.0: reg 0x20: [io  0xd400-0xd40f]
[    0.179912] pci 0000:03:00.0: reg 0x24: [mem 0xfeaffc00-0xfeafffff]
[    0.179953] pci 0000:03:00.0: supports D1
[    0.179955] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[    0.180020] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.180028] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.180031] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.180034] pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.180094] pci 0000:02:00.0: [11ab:4364] type 00 class 0x020000
[    0.180134] pci 0000:02:00.0: reg 0x10: [mem 0xfe9fc000-0xfe9fffff 64bit]
[    0.180144] pci 0000:02:00.0: reg 0x18: [io  0xc800-0xc8ff]
[    0.180182] pci 0000:02:00.0: reg 0x30: [mem 0xfe9c0000-0xfe9dffff pref]
[    0.180217] pci 0000:02:00.0: supports D1 D2
[    0.180219] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.188019] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    0.188024] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    0.188028] pci 0000:00:1c.5:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.188086] pci 0000:05:02.0: [11ab:4320] type 00 class 0x020000
[    0.188111] pci 0000:05:02.0: reg 0x10: [mem 0xfebfc000-0xfebfffff]
[    0.188121] pci 0000:05:02.0: reg 0x14: [io  0xe800-0xe8ff]
[    0.188174] pci 0000:05:02.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
[    0.188193] pci 0000:05:02.0: supports D1 D2
[    0.188195] pci 0000:05:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.188248] pci 0000:05:03.0: [11c1:5811] type 00 class 0x0c0010
[    0.188267] pci 0000:05:03.0: reg 0x10: [mem 0xfebfb000-0xfebfbfff]
[    0.188323] pci 0000:05:03.0: supports D1 D2
[    0.188325] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
[    0.188398] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.188402] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.188405] pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.188410] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.188412] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.188414] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.188416] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.188418] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xdfffffff window] (subtractive decode)
[    0.188420] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xffffffff window] (subtractive decode)
[    0.189092] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.189146] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.189198] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.189250] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.189302] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.189355] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[    0.189407] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.189459] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.189517] ACPI: Enabled 3 GPEs in block 00 to 3F
[    0.192017] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.192018] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.192020] vgaarb: loaded
[    0.192022] vgaarb: bridge control possible 0000:01:00.0
[    0.192124] PCI: Using ACPI for IRQ routing
[    0.194691] PCI: pci_cache_line_size set to 64 bytes
[    0.194740] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.194742] e820: reserve RAM buffer [mem 0xcff70000-0xcfffffff]
[    0.194902] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.194905] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.194909] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.196037] clocksource: Switched to clocksource hpet
[    0.203600] pnp: PnP ACPI init
[    0.203707] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.203712] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.203789] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.203973] system 00:02: [io  0x0290-0x029f] has been reserved
[    0.203977] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.204141] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.204144] system 00:03: [io  0x0800-0x087f] could not be reserved
[    0.204146] system 00:03: [io  0x0500-0x057f] could not be reserved
[    0.204149] system 00:03: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.204151] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.204153] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.204155] system 00:03: [mem 0xfed50000-0xfed8ffff] has been reserved
[    0.204158] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.204265] system 00:04: [mem 0xffc00000-0xffdfffff] has been reserved
[    0.204268] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.204448] pnp 00:05: [dma 0 disabled]
[    0.204514] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.204599] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.204602] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.204605] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.204660] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.204749] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    0.204752] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.204909] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.204912] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.204914] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.204916] system 00:09: [mem 0x00100000-0xcfffffff] could not be reserved
[    0.204919] system 00:09: [mem 0xe0000000-0xffffffff] could not be reserved
[    0.204922] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.205041] pnp: PnP ACPI: found 10 devices
[    0.213626] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.213646] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.213650] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 400000 add_align 100000
[    0.213658] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.213665] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.213675] pci 0000:00:1f.0: BAR 13: [io  size 0x0080] has bogus alignment
[    0.213678] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 400000 min_align 100000
[    0.213681] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x004fffff] res_to_dev_res add_size 400000 min_align 100000
[    0.213683] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.213685] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.213687] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.213689] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.213692] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.213694] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.213699] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff]
[    0.213704] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
[    0.213708] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
[    0.213711] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.213714] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.213716] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.213719] pci 0000:00:01.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.213722] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.213725] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.213727] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.213731] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf03fffff]
[    0.213734] pci 0000:00:1c.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.213739] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.213742] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.213746] pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.213749] pci 0000:00:1c.4:   bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[    0.213753] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    0.213756] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    0.213760] pci 0000:00:1c.5:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.213763] pci 0000:00:1c.5:   bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
[    0.213768] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.213770] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.213774] pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.213781] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.213783] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.213785] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.213787] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.213789] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff window]
[    0.213791] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff window]
[    0.213793] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    0.213794] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.213796] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.213798] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    0.213800] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf03fffff]
[    0.213802] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.213804] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.213806] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.213808] pci_bus 0000:03: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
[    0.213810] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    0.213812] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.213813] pci_bus 0000:02: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
[    0.213815] pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
[    0.213817] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.213819] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.213821] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.213823] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.213825] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.213827] pci_bus 0000:05: resource 8 [mem 0xd0000000-0xdfffffff window]
[    0.213829] pci_bus 0000:05: resource 9 [mem 0xf0000000-0xffffffff window]
[    0.213928] NET: Registered protocol family 2
[    0.214152] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.214393] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.214712] TCP: Hash tables configured (established 65536 bind 65536)
[    0.214759] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.214806] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.214948] NET: Registered protocol family 1
[    0.215129] pci 0000:01:00.0: Video device with shadowed ROM
[    0.215141] PCI: CLS 32 bytes, default 64
[    0.215202] Unpacking initramfs...
[    0.502260] Freeing initrd memory: 16180K (ffff880036056000 - ffff880037023000)
[    0.502301] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.502304] software IO TLB [mem 0xcbf70000-0xcff70000] (64MB) mapped at [ffff8800cbf70000-ffff8800cff6ffff]
[    0.502472] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa0b
[    0.502480] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa0b
[    0.502494] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa0b
[    0.502508] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa0b
[    0.502595] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.502967] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.503013] audit: initializing netlink subsys (disabled)
[    0.503035] audit: type=2000 audit(1455127067.500:1): initialized
[    0.503424] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.503445] zbud: loaded
[    0.503611] VFS: Disk quotas dquot_6.6.0
[    0.503640] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.504438] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.504482] io scheduler noop registered
[    0.504485] io scheduler deadline registered
[    0.504505] io scheduler cfq registered (default)
[    0.504836] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[    0.505299] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.505307] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.505331] intel_idle: does not run on family 6 model 23
[    0.505366] GHES: HEST is not enabled!
[    0.505431] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.525766] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.526138] Linux agpgart interface v0.103
[    0.526263] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.526264] AMD IOMMUv2 functionality not available on this system
[    0.526701] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.526702] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.527240] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.527345] mousedev: PS/2 mouse device common for all mice
[    0.527393] rtc_cmos 00:01: RTC can wake from S4
[    0.527506] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.527527] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.527540] ledtrig-cpu: registered to indicate activity on CPUs
[    0.528151] NET: Registered protocol family 10
[    0.528410] mip6: Mobile IPv6
[    0.528414] NET: Registered protocol family 17
[    0.528419] mpls_gso: MPLS GSO support
[    0.528743] registered taskstats version 1
[    0.528771] zswap: loaded using pool lzo/zbud
[    0.529195] rtc_cmos 00:01: setting system clock to 2016-02-10 17:57:47 UTC (1455127067)
[    0.529246] PM: Hibernation image not present or could not be loaded.
[    0.529662] Freeing unused kernel memory: 1296K (ffffffff81b08000 - ffffffff81c4c000)
[    0.529664] Write protecting the kernel read-only data: 10240k
[    0.529960] Freeing unused kernel memory: 456K (ffff88000158e000 - ffff880001600000)
[    0.530367] Freeing unused kernel memory: 1300K (ffff8800018bb000 - ffff880001a00000)
[    0.541139] random: systemd-udevd urandom read with 4 bits of entropy available
[    0.552779] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.571712] ACPI: bus type USB registered
[    0.571743] usbcore: registered new interface driver usbfs
[    0.571755] usbcore: registered new interface driver hub
[    0.571795] usbcore: registered new device driver usb
[    0.572341] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.572639] ehci-pci: EHCI PCI platform driver
[    0.572749] uhci_hcd: USB Universal Host Controller Interface driver
[    0.572816] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.572824] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.572837] ehci-pci 0000:00:1a.7: debug port 1
[    0.574544] SCSI subsystem initialized
[    0.575970] libata version 3.00 loaded.
[    0.576751] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[    0.576805] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe7ffc00
[    0.578929] sky2: driver version 1.30
[    0.579072] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 3
[    0.579456] sky2 0000:02:00.0 eth0: addr 00:22:15:17:07:62
[    0.579566] skge: 1.14 addr 0xfebfc000 irq 18 chip Yukon-Lite rev 9
[    0.579747] skge 0000:05:02.0 eth1: addr 00:22:15:17:1f:e0
[    0.588031] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.588127] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.588130] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.588132] usb usb1: Product: EHCI Host Controller
[    0.588134] usb usb1: Manufacturer: Linux 4.3.0-1-amd64 ehci_hcd
[    0.588136] usb usb1: SerialNumber: 0000:00:1a.7
[    0.588291] hub 1-0:1.0: USB hub found
[    0.588299] hub 1-0:1.0: 6 ports detected
[    0.588595] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.588602] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.588613] ehci-pci 0000:00:1d.7: debug port 1
[    0.592525] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    0.592537] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe7ff800
[    0.594132] sky2 0000:02:00.0 enp2s0: renamed from eth0
[    0.604022] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.604067] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.604071] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.604073] usb usb2: Product: EHCI Host Controller
[    0.604076] usb usb2: Manufacturer: Linux 4.3.0-1-amd64 ehci_hcd
[    0.604078] usb usb2: SerialNumber: 0000:00:1d.7
[    0.604240] hub 2-0:1.0: USB hub found
[    0.604247] hub 2-0:1.0: 6 ports detected
[    0.604314] skge 0000:05:02.0 enp5s2: renamed from eth1
[    0.604520] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.604527] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.604533] uhci_hcd 0000:00:1a.0: detected 2 ports
[    0.604556] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[    0.604609] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.604614] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.604616] usb usb3: Product: UHCI Host Controller
[    0.604619] usb usb3: Manufacturer: Linux 4.3.0-1-amd64 uhci_hcd
[    0.604621] usb usb3: SerialNumber: 0000:00:1a.0
[    0.604804] hub 3-0:1.0: USB hub found
[    0.604816] hub 3-0:1.0: 2 ports detected
[    0.605006] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.605013] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.605018] uhci_hcd 0000:00:1a.1: detected 2 ports
[    0.605040] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[    0.605109] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.605112] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.605114] usb usb4: Product: UHCI Host Controller
[    0.605115] usb usb4: Manufacturer: Linux 4.3.0-1-amd64 uhci_hcd
[    0.605117] usb usb4: SerialNumber: 0000:00:1a.1
[    0.605243] hub 4-0:1.0: USB hub found
[    0.605250] hub 4-0:1.0: 2 ports detected
[    0.605450] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.605457] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.605463] uhci_hcd 0000:00:1a.2: detected 2 ports
[    0.605481] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00
[    0.605531] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.605533] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.605535] usb usb5: Product: UHCI Host Controller
[    0.605537] usb usb5: Manufacturer: Linux 4.3.0-1-amd64 uhci_hcd
[    0.605539] usb usb5: SerialNumber: 0000:00:1a.2
[    0.605653] hub 5-0:1.0: USB hub found
[    0.605660] hub 5-0:1.0: 2 ports detected
[    0.605828] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.605835] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.605840] uhci_hcd 0000:00:1d.0: detected 2 ports
[    0.605856] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[    0.605922] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.605924] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.605927] usb usb6: Product: UHCI Host Controller
[    0.605928] usb usb6: Manufacturer: Linux 4.3.0-1-amd64 uhci_hcd
[    0.605930] usb usb6: SerialNumber: 0000:00:1d.0
[    0.606052] hub 6-0:1.0: USB hub found
[    0.606062] hub 6-0:1.0: 2 ports detected
[    0.606235] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.606241] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.606246] uhci_hcd 0000:00:1d.1: detected 2 ports
[    0.606262] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[    0.606324] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.606327] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.606329] usb usb7: Product: UHCI Host Controller
[    0.606330] usb usb7: Manufacturer: Linux 4.3.0-1-amd64 uhci_hcd
[    0.606332] usb usb7: SerialNumber: 0000:00:1d.1
[    0.606448] hub 7-0:1.0: USB hub found
[    0.606458] hub 7-0:1.0: 2 ports detected
[    0.606630] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.606636] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.606641] uhci_hcd 0000:00:1d.2: detected 2 ports
[    0.606657] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[    0.606717] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.606719] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.606721] usb usb8: Product: UHCI Host Controller
[    0.606723] usb usb8: Manufacturer: Linux 4.3.0-1-amd64 uhci_hcd
[    0.606725] usb usb8: SerialNumber: 0000:00:1d.2
[    0.606843] hub 8-0:1.0: USB hub found
[    0.606852] hub 8-0:1.0: 2 ports detected
[    0.607119] ahci 0000:00:1f.2: version 3.0
[    0.607254] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.607283] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    0.607286] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[    0.636050] firewire_ohci 0000:05:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[    0.648794] scsi host0: ahci
[    0.648937] scsi host1: ahci
[    0.649071] scsi host2: ahci
[    0.649209] scsi host3: ahci
[    0.649343] scsi host4: ahci
[    0.649475] scsi host5: ahci
[    0.649553] ata1: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7fe900 irq 29
[    0.649556] ata2: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7fe980 irq 29
[    0.649558] ata3: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7fea00 irq 29
[    0.649560] ata4: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7fea80 irq 29
[    0.649562] ata5: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7feb00 irq 29
[    0.649564] ata6: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7feb80 irq 29
[    0.900012] usb 1-3: new high-speed USB device number 2 using ehci-pci
[    1.033850] usb 1-3: New USB device found, idVendor=058f, idProduct=6362
[    1.033853] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.033856] usb 1-3: Product: Mass Storage Device
[    1.033858] usb 1-3: Manufacturer: Generic
[    1.033861] usb 1-3: SerialNumber: 058F63626376
[    1.035435] usb-storage 1-3:1.0: USB Mass Storage device detected
[    1.035587] scsi host6: usb-storage 1-3:1.0
[    1.035682] usbcore: registered new interface driver usb-storage
[    1.036030] usbcore: registered new interface driver uas
[    1.044032] usb 8-1: new low-speed USB device number 2 using uhci_hcd
[    1.136097] firewire_core 0000:05:03.0: created device fw0: GUID 001e8c00014cb3ab, S400
[    1.140024] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.140546] ata1.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133
[    1.140549] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    1.141193] ata1.00: configured for UDMA/133
[    1.141378] scsi 0:0:0:0: Direct-Access     ATA      ST3250410AS      C    PQ: 0 ANSI: 5
[    1.142223] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.142265] sd 0:0:0:0: [sda] Write Protect is off
[    1.142268] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.142287] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.177481]  sda: sda1 sda2 sda3
[    1.177806] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.430035] usb 8-1: New USB device found, idVendor=045e, idProduct=0040
[    1.430040] usb 8-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[    1.430042] usb 8-1: Product: Microsoft 3-Button Mouse with IntelliEye(tm)
[    1.430045] usb 8-1: Manufacturer: Microsoft
[    1.434202] hidraw: raw HID events driver © Jiri Kosina
[    1.449300] usbcore: registered new interface driver usbhid
[    1.449301] usbhid: USB HID core driver
[    1.449933] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(tm) as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/0003:045E:0040.0001/input/input1
[    1.450010] hid-generic 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(tm)] on usb-0000:00:1d.2-1/input0
[    1.460031] ata2: SATA link down (SStatus 0 SControl 300)
[    1.500014] tsc: Refined TSC clocksource calibration: 2666.363 MHz
[    1.500018] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x266f1e753c0, max_idle_ns: 440795206381 ns
[    1.952019] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.953077] ata3.00: ATAPI: Optiarc DVD RW AD-7200S, 1.0B, max UDMA/100
[    1.954620] ata3.00: configured for UDMA/100
[    1.959723] scsi 2:0:0:0: CD-ROM            Optiarc  DVD RW AD-7200S  1.0B PQ: 0 ANSI: 5
[    1.971820] sr 2:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.971823] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.971984] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.032748] scsi 6:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    2.033364] scsi 6:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[    2.033864] scsi 6:0:0:2: Direct-Access     Generic  USB xD/SM Reader 1.02 PQ: 0 ANSI: 0
[    2.034490] scsi 6:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    2.062734] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[    2.063358] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[    2.063981] sd 6:0:0:3: [sde] Attached SCSI removable disk
[    2.064609] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    2.288018] ata4: SATA link down (SStatus 0 SControl 300)
[    2.500075] clocksource: Switched to clocksource tsc
[    2.608014] ata5: SATA link down (SStatus 0 SControl 300)
[    2.928012] ata6: SATA link down (SStatus 0 SControl 300)
[    2.928907] scsi host7: pata_marvell
[    2.929053] scsi host8: pata_marvell
[    2.929123] ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
[    2.929125] ata8: PATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
[    3.580030] floppy0: no floppy controllers found
[    3.609549] PM: Starting manual resume from disk
[    3.609554] PM: Hibernation image partition 8:3 present
[    3.609555] PM: Looking for hibernation image.
[    3.609708] PM: Image not found (code -22)
[    3.609710] PM: Hibernation image not present or could not be loaded.
[    3.795500] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.416097] random: nonblocking pool is initialized
[    4.525593] systemd[1]: systemd 228 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    4.525754] systemd[1]: Detected architecture x86-64.
[    4.541136] systemd[1]: Set hostname to <dmytruk1>.
[    5.531822] systemd[1]: Listening on udev Control Socket.
[    5.531883] systemd[1]: Listening on Syslog Socket.
[    5.531916] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.531952] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.531984] systemd[1]: Listening on Journal Socket.
[    5.532067] systemd[1]: Listening on Journal Audit Socket.
[    5.532161] systemd[1]: Created slice User and Session Slice.
[    5.532184] systemd[1]: Listening on udev Kernel Socket.
[    5.532208] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.532245] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.532269] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.532341] systemd[1]: Created slice System Slice.
[    5.560679] systemd[1]: Starting Load Kernel Modules...
[    5.560781] systemd[1]: Created slice system-getty.slice.
[    5.561284] systemd[1]: Mounting Huge Pages File System...
[    5.561305] systemd[1]: Reached target Slices.
[    5.561879] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    5.562378] systemd[1]: Starting Journal Service...
[    5.562398] systemd[1]: Reached target Paths.
[    5.562426] systemd[1]: Reached target Encrypted Volumes.
[    5.562900] systemd[1]: Mounting POSIX Message Queue File System...
[    5.563021] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    5.563036] systemd[1]: Reached target Remote File Systems (Pre).
[    5.563049] systemd[1]: Reached target Remote File Systems.
[    5.563508] systemd[1]: Mounting Debug File System...
[    5.563955] systemd[1]: Starting LSB: Set console font and keymap...
[    5.564187] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.612716] systemd[1]: Started Load Kernel Modules.
[    5.613496] systemd[1]: Starting Apply Kernel Variables...
[    5.687488] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    5.688110] systemd[1]: Starting Create Static Device Nodes in /dev...
[    5.906896] systemd[1]: Started Apply Kernel Variables.
[    6.156197] systemd[1]: Started Journal Service.
[    7.097941] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    7.192408] systemd-journald[210]: Received request to flush runtime journal from PID 1
[    7.412767] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    7.412773] ACPI: Power Button [PWRB]
[    7.412841] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    7.412843] ACPI: Power Button [PWRF]
[    7.533502] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.603572] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[    7.675531] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20150818/utaddress-254)
[    7.675539] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.675542] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20150818/utaddress-254)
[    7.675546] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.675547] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20150818/utaddress-254)
[    7.675550] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.675552] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    7.756761] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input4
[    7.768967] ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041F conflicts with OpRegion 0x0000000000000400-0x000000000000040F (\SMRG) (20150818/utaddress-254)
[    7.768974] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.786957] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    7.787008] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    7.787058] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    7.787106] sd 6:0:0:1: Attached scsi generic sg3 type 0
[    7.787155] sd 6:0:0:2: Attached scsi generic sg4 type 0
[    7.787204] sd 6:0:0:3: Attached scsi generic sg5 type 0
[    7.907621] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    7.966151] [drm] Initialized drm 1.1.0 20060810
[    8.075362] iTCO_vendor_support: vendor-support=0
[    8.094529] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    8.094577] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[    8.094729] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    8.176094] [drm] VGACON disable radeon kernel modesetting.
[    8.176113] [drm:radeon_init [radeon]] *ERROR* No UMS support in radeon module!
[    8.228410] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1989B: line_outs=4 (0x12/0x16/0x24/0x25/0x0) type:line
[    8.228415] snd_hda_codec_analog hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    8.228417] snd_hda_codec_analog hdaudioC0D0:    hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
[    8.228419] snd_hda_codec_analog hdaudioC0D0:    mono: mono_out=0x0
[    8.228421] snd_hda_codec_analog hdaudioC0D0:    dig-out=0x1b/0x1d
[    8.228422] snd_hda_codec_analog hdaudioC0D0:    inputs:
[    8.228425] snd_hda_codec_analog hdaudioC0D0:      Front Mic=0x14
[    8.228427] snd_hda_codec_analog hdaudioC0D0:      Rear Mic=0x17
[    8.228429] snd_hda_codec_analog hdaudioC0D0:      Line=0x15
[    8.228431] snd_hda_codec_analog hdaudioC0D0:      CD=0x18
[    8.240718] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    8.241633] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    8.241735] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    8.241814] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    8.241878] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    8.241941] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    8.242005] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    9.136232] Adding 3865596k swap on /dev/sda3.  Priority:-1 extents:1 across:3865596k FS
[    9.850648] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   10.016322] sky2 0000:02:00.0 enp2s0: enabling interface
[   10.016435] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   10.016446] skge 0000:05:02.0 enp5s2: enabling interface
[   10.019676] IPv6: ADDRCONF(NETDEV_UP): enp5s2: link is not ready
[   10.520052] floppy0: no floppy controllers found
[   10.989541] ip_tables: © 2000-2006 Netfilter Core Team
[   11.012796] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)



Xorg.0.log

Что-то у меня spoiler не срабатывает в сообщениях. Исправил теги spoiler на code.
У вас нет необходимых прав для просмотра вложений в этом сообщении.
Спасибо сказали:

Аватара пользователя
Bizdelnick
Модератор
Сообщения: 18483
Статус: grammatikführer
ОС: Debian GNU/Linux

Re: ATI HD 3000 + kernel 3.16

Сообщение Bizdelnick »

ava297
Пользуйтесь, пожалуйста, тегом code для длинных листингов. spoiler что-то дурит.
Пишите правильно:
в консоли
вку́пе (с чем-либо)
в общем
вообще
в течение (часа)
новичок
нюанс
по умолчанию
приемлемо
проблема
пробовать
трафик
Спасибо сказали:

Аватара пользователя
yars
Сообщения: 1144
Статус: Slacker!
ОС: Slackware64-current

Re: ATI HD 3000 + kernel 3.16

Сообщение yars »

Не имею такой карты, но обычно отключать modesetting требуется для гибридной графики (что-то наподобие nVidia Optimus, наличие двух видеокарт). Вижу, что UMS даже с nomodeset у вас не поддерживается. Вероятно, есть битые пакеты? Попробуйте для начала переустановить mesa и xf86-video-radeon (или похожий). Блоб ставить бесполезно: его последние версии, скорее всего, не поддерживают вашу карту, и несоместимы с ABI новых иксов. Еще, видно, что udev не создает ноды для устройства. По-видимому, поддержку окончательно дропнули.
Slackware64-current/Xfce 4.12/Acer TravelMate 5760
-------------
Registered Linux User #557010
Спасибо сказали:

ava297
Сообщения: 6
ОС: Debian GNU/Linux (testing)

Re: ATI HD 3000 + kernel 3.16

Сообщение ava297 »

Bizdelnick писал(а):
10.02.2016 23:30
ava297
Пользуйтесь, пожалуйста, тегом code для длинных листингов. spoiler что-то дурит.

Спасибо за информацию, исправил.
Спасибо сказали:

ava297
Сообщения: 6
ОС: Debian GNU/Linux (testing)

Re: ATI HD 3000 + kernel 3.16

Сообщение ava297 »

yars писал(а):
11.02.2016 01:43
Не имею такой карты, но обычно отключать modesetting требуется для гибридной графики (что-то наподобие nVidia Optimus, наличие двух видеокарт). Вижу, что UMS даже с nomodeset у вас не поддерживается. Вероятно, есть битые пакеты? Попробуйте для начала переустановить mesa и xf86-video-radeon (или похожий). Блоб ставить бесполезно: его последние версии, скорее всего, не поддерживают вашу карту, и несоместимы с ABI новых иксов. Еще, видно, что udev не создает ноды для устройства. По-видимому, поддержку окончательно дропнули.

Наличие битых пакетов исключено, испробовал при экспериментах несколько дистрибутивов. Свежие Fedora, Ubuntu, SysRescCD. Без nomodeset, поведение одинаковое - зависание при инициализации оборудования ядром.
За блоб (fglrx-driver) и не говорю. Последняя версия, которая поддерживала эти карты в Debian Wheezy (fglrx-legacy-driver).

Единственное, что я не пробовал 32-битные системы.
Еще проскакивала информация при гуглении проблемы, что если в системе ОЗУ больше 3 ГБайт (у меня 8 ГБайт) то есть какие-то проблемы с работой iommu и swiotlb в ядре и работой видеокарт.
Но там была переписка между программистами с обилием кода.
А я по специальности да и по жизни не программист, и не смог вникнуть в суть проблемы.
Спасибо сказали: