Kernel boot log:
Linux version 2.6.13.4-omap1
SX1#
10166c33:
(root@vovan) (gcc version 3.4.2) #70 Tue Nov 22 21:04:26 MSK 2005
<4>CPU: ARM925Tid(wb) [54029252] revision 2 (ARMv4T)
<4>Machine: OMAP310 based Siemens SX1
<4>Memory policy: ECC disabled, Data cache writeback
<4>OMAP0310 revision 2 handled as 15xx id: 65858c1d22451c1c
<6>SRAM size: 0x30000
<4>Clocks: ARM_SYSST: 0x1000 DPLL_CTL: 0x3a33 ARM_CKCTL: 0x010d
<6>Clocking rate (xtal/DPLL1/MPU): 12.0/120.0/120.0 MHz
<7>On node 0 totalpages: 4096
<7> DMA zone: 4096 pages, LIFO batch:1
<7> Normal zone: 0 pages, LIFO batch:1
<7> HighMem zone: 0 pages, LIFO batch:1
<4>CPU0: D VIVT write-back cache
<4>CPU0: I cache: 16384 bytes, associativity 2, 16 byte lines, 512 set
s
<4>CPU0: D cache: 8192 bytes, associativity 2, 16 byte lines, 256 sets
SX1#
10166f16:
<4>Built 1 zonelists
<5>Kernel command line: mem=16M console=ttyS0,115200n8 root=/dev/mtdbl
ock3 rw
<4>Total of 64 interrupts in 2 interrupt banks
<6>OMAP1510 GPIO hardware
<4>PID hash table entries: 128 (order: 7, 2048 bytes)
<4>Console: colour dummy device 80x30
<4>Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
<4>Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>Memory: 16MB = 16MB total
<5>Memory: 14672KB available (1111K code, 301K data, 72K init)
<7>Calibrating delay loop... 59.80 BogoMIPS (lpj=299008)
<4>Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: ok
<6>Linux NoNET1.0 for Linux 2.6
SX1#
101671a6:
<6>DMA support for OMAP15xx initialized
<4>Initializing OMAP McBSP system
<4>MUX: initialized W4_USB_PUEN
<3>no usb0 alt pin config on 15xx
<4>USB: hmc 0, usb0 3 wires (dev)
<6>i2c_omap: rev1.0 at 100 KHz
<7>i2c_adapter i2c-0: registered as adapter #0
<6>omapfb: configured for panel SX1
<6>OMAP LCD controller initialized.
<4>Sofia write: 7 10
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x32, len=2
<4>Console: switching to colour frame buffer device 44x36
<6>OMAP framebuffer initialized vram=131072
<6>omap_rtc: RTC power up reset detected.
<6>omap_rtc: Enabling RTC.
<6>io scheduler noop registered
SX1#
10167403:
<6>io scheduler cfq registered
<6>i2c /dev entries driver
<7>i2c-core: driver dev_driver registered.
<7>i2c_adapter i2c-0: Registered as minor 0
<6>udc: OMAP UDC driver, version: 4 October 2004 (iso) (dma)
<6>udc: OMAP UDC rev 2.7
<6>udc: hmc mode 0, (unknown) transceiver
<6>udc: fifo mode 3, 648 bytes not used
<6>gs_bind: Gadget Serial v2.0 bound
<6>gs_module_init: Gadget Serial v2.0 loaded
<6>mice: PS/2 mouse device common for all mice
<6>OMAP Keypad Driver
<4>VFS: No root yet, retrying to mount root on mtdblock3 (unknown-bloc
k(0,0))
<4>VFS: No root yet, retrying to mount root on mtdblock3 (unknown-bloc
k(0,0))
SX1#
1016766f:
<4>omap-keypad: Spurious key event 0-3
<4>omap-keypad: Spurious key event 1-3
<4>omap-keypad: Spurious key event 2-3
<4>omap-keypad: Spurious key event 3-3
<4>omap-keypad: Spurious key event 4-3
<4>omap-keypad: Spurious key event 5-3
<4>omap-keypad: Spurious key event 6-3
<4>omap-keypad: Spurious key event 7-3
<4>omap-keypad: Spurious key event 0-3
<4>omap-keypad: Spurious key event 1-3
<4>omap-keypad: Spurious key event 2-3
<4>omap-keypad: Spurious key event 3-3
<4>omap-keypad: Spurious key event 4-3
<4>omap-keypad: Spurious key event 5-3
<4>omap-keypad: Spurious key event 6-3
<4>omap-keypad: Spurious key event 7-3
SX1#
101678df:
<4>VFS: No root yet, retrying to mount root on mtdblock3 (unknown-bloc
k(0,0))
Графическая оболочка qtopia
Форум разработчиков http://forum.oslik.ru/viewforum.php?f=46
