Печать с Win клиента (Печать с Win клиента при подключении к терминалу)

Модераторы: dimbor, Модераторы разделов

JohnConnor
Сообщения: 5

Печать с Win клиента

Сообщение JohnConnor »

доброго времени суток,
не бейте сразу я новичок, пытаюсь установить wine@etersoft+rx@etrsoft+debian 5, все работает кроме принтеров (hp1200 и 1300)
при подключении, в клиенте принтер виден( на вкладке serveces) , во время сеанса я выбирал все драйвера по очереди, но безрезультатно в терминале принтеры не печатают=(
помогите , а то уже вторую неделю голову ломаю
вывод команды

/etc/init.d/freenx-server check

Код: Выделить всё

Usage:  /sbin/mount.cifs <remotetarget> <dir> -o <options>

Mount the remote target, specified as a UNC name, to a local directory.

Options:
    user=<arg>
    pass=<arg>
    dom=<arg>

Less commonly used options:
    credentials=<filename>,guest,perm,noperm,setuids,nosetuids,rw,ro,
    sep=<char>,iocharset=<codepage>,suid,nosuid,exec,noexec,serverino,
    mapchars,nomapchars,nolock,servernetbiosname=<SRV_RFC1001NAME>
    directio,nounix,cifsacl,sec=<authentication mechanism>,sign

Options not needed for servers supporting CIFS Unix extensions
    (e.g. unneeded for mounts to most Samba versions):
    uid=<uid>,gid=<gid>,dir_mode=<mode>,file_mode=<mode>,sfu

Rarely used options:
    port=<tcpport>,rsize=<size>,wsize=<size>,unc=<unc_name>,ip=<ip_address>,
    dev,nodev,nouser_xattr,netbiosname=<OUR_RFC1001NAME>,hard,soft,intr,
    nointr,ignorecase,noposixpaths,noacl,prefixpath=<path>,nobrl
    in6_addr

Options are described in more detail in the manual page
    man 8 mount.cifs

To display the version number of the mount helper:
    /sbin/mount.cifs -V

Usage:  /sbin/umount.cifs <remotetarget> <dir>

Unmount the specified directory

Less commonly used options:
    -r    If mount fails, retry with readonly remount.
    -n    Do not write to mtab.
    -f    Attempt a forced unmount, even if the fs is busy.
    -l    Attempt lazy unmount, Unmount now, cleanup later.
    -v    Enable verbose mode (may be useful for debugging).
    -h    Display this help.

Options are described in more detail in the manual page
    man 8 umount.cifs

To display the version number of the cifs umount utility:
    /sbin/umount.cifs -V

Invoking the umount utility on cifs mounts, can execute /sbin/umount.cifs (if present and umount -i is not specified.

Usage:  /sbin/mount.cifs <remotetarget> <dir> -o <options>

Mount the remote target, specified as a UNC name, to a local directory.

Options:
    user=<arg>
    pass=<arg>
    dom=<arg>

Less commonly used options:
    credentials=<filename>,guest,perm,noperm,setuids,nosetuids,rw,ro,
    sep=<char>,iocharset=<codepage>,suid,nosuid,exec,noexec,serverino,
    mapchars,nomapchars,nolock,servernetbiosname=<SRV_RFC1001NAME>
    directio,nounix,cifsacl,sec=<authentication mechanism>,sign

Options not needed for servers supporting CIFS Unix extensions
    (e.g. unneeded for mounts to most Samba versions):
    uid=<uid>,gid=<gid>,dir_mode=<mode>,file_mode=<mode>,sfu

Rarely used options:
    port=<tcpport>,rsize=<size>,wsize=<size>,unc=<unc_name>,ip=<ip_address>,
    dev,nodev,nouser_xattr,netbiosname=<OUR_RFC1001NAME>,hard,soft,intr,
    nointr,ignorecase,noposixpaths,noacl,prefixpath=<path>,nobrl
    in6_addr

Options are described in more detail in the manual page
    man 8 mount.cifs

To display the version number of the mount helper:
    /sbin/mount.cifs -V

Usage:  /sbin/umount.cifs <remotetarget> <dir>

Unmount the specified directory

Less commonly used options:
    -r    If mount fails, retry with readonly remount.
    -n    Do not write to mtab.
    -f    Attempt a forced unmount, even if the fs is busy.
    -l    Attempt lazy unmount, Unmount now, cleanup later.
    -v    Enable verbose mode (may be useful for debugging).
    -h    Display this help.

Options are described in more detail in the manual page
    man 8 umount.cifs

To display the version number of the cifs umount utility:
    /sbin/umount.cifs -V

Invoking the umount utility on cifs mounts, can execute /sbin/umount.cifs (if present and umount -i is not specified.

----> Testing your nxserver configuration ...

Usage:  /sbin/mount.cifs <remotetarget> <dir> -o <options>

Mount the remote target, specified as a UNC name, to a local directory.

Options:
    user=<arg>
    pass=<arg>
    dom=<arg>

Less commonly used options:
    credentials=<filename>,guest,perm,noperm,setuids,nosetuids,rw,ro,
    sep=<char>,iocharset=<codepage>,suid,nosuid,exec,noexec,serverino,
    mapchars,nomapchars,nolock,servernetbiosname=<SRV_RFC1001NAME>
    directio,nounix,cifsacl,sec=<authentication mechanism>,sign

Options not needed for servers supporting CIFS Unix extensions
    (e.g. unneeded for mounts to most Samba versions):
    uid=<uid>,gid=<gid>,dir_mode=<mode>,file_mode=<mode>,sfu

Rarely used options:
    port=<tcpport>,rsize=<size>,wsize=<size>,unc=<unc_name>,ip=<ip_address>,
    dev,nodev,nouser_xattr,netbiosname=<OUR_RFC1001NAME>,hard,soft,intr,
    nointr,ignorecase,noposixpaths,noacl,prefixpath=<path>,nobrl
    in6_addr

Options are described in more detail in the manual page
    man 8 mount.cifs

To display the version number of the mount helper:
    /sbin/mount.cifs -V

Usage:  /sbin/umount.cifs <remotetarget> <dir>

Unmount the specified directory

Less commonly used options:
    -r    If mount fails, retry with readonly remount.
    -n    Do not write to mtab.
    -f    Attempt a forced unmount, even if the fs is busy.
    -l    Attempt lazy unmount, Unmount now, cleanup later.
    -v    Enable verbose mode (may be useful for debugging).
    -h    Display this help.

Options are described in more detail in the manual page
    man 8 umount.cifs

To display the version number of the cifs umount utility:
    /sbin/umount.cifs -V

Invoking the umount utility on cifs mounts, can execute /sbin/umount.cifs (if present and umount -i is not specified.
Warning: Invalid value "KDE_PRINTRC=/root/.kde/share/config/kdeprintrc". ENABLE_KDE_CUPS will not work.
         For root it's normal. Try to run 'nxloadconfig --check' by user.
Warning: "/usr/lib/cups/backend/smb" is not executable.
         Users will not be able to enable printing.
Warning: Invalid value "DEFAULT_X_SESSION=/etc/X11/xdm/Xsession"
         Users might not be able to request a default X session.
Warning: Invalid value "COMMAND_START_KDE=startkde"
         Users will not be able to request a KDE session.
Warning: Invalid value "COMMAND_START_CDE=cdwm"
         Users will not be able to request a CDE session.

  Warnings occured during config check.
  To enable these features please correct the configuration file.

<---- done

----> Testing your nxserver connection ...

Usage: /sbin/mount.cifs <remotetarget> <dir> -o <options>

Mount the remote target, specified as a UNC name, to a local directory.

Options:
user=<arg>
pass=<arg>
dom=<arg>

Less commonly used options:
credentials=<filename>,guest,perm,noperm,setuids,nosetuids,rw,ro,
sep=<char>,iocharset=<codepage>,suid,nosuid,exec,noexec,serverino,
mapchars,nomapchars,nolock,servernetbiosname=<SRV_RFC1001NAME>
directio,nounix,cifsacl,sec=<authentication mechanism>,sign

Options not needed for servers supporting CIFS Unix extensions
(e.g. unneeded for mounts to most Samba versions):
uid=<uid>,gid=<gid>,dir_mode=<mode>,file_mode=<mode>,sfu

Rarely used options:
port=<tcpport>,rsize=<size>,wsize=<size>,unc=<unc_name>,ip=<ip_address>,
dev,nodev,nouser_xattr,netbiosname=<OUR_RFC1001NAME>,hard,soft,intr,
nointr,ignorecase,noposixpaths,noacl,prefixpath=<path>,nobrl
in6_addr

Options are described in more detail in the manual page
man 8 mount.cifs

To display the version number of the mount helper:
/sbin/mount.cifs -V

Usage: /sbin/umount.cifs <remotetarget> <dir>

Unmount the specified directory

Less commonly used options:
-r If mount fails, retry with readonly remount.
Do not write to mtab.-f Attempt a forced unmount, even if the fs is busy.
-l Attempt lazy unmount, Unmount now, cleanup later.
-v Enable verbose mode (may be useful for debugging).
-h Display this help.

Options are described in more detail in the manual page
man 8 umount.cifs

To display the version number of the cifs umount utility:
/sbin/umount.cifs -V

Invoking the umount utility on cifs mounts, can execute /sbin/umount.cifs (if present and umount -i is not specified.

Usage: /sbin/mount.cifs <remotetarget> <dir> -o <options>

Mount the remote target, specified as a UNC name, to a local directory.

Options:
user=<arg>
pass=<arg>
dom=<arg>

Less commonly used options:
credentials=<filename>,guest,perm,noperm,setuids,nosetuids,rw,ro,
sep=<char>,iocharset=<codepage>,suid,nosuid,exec,noexec,serverino,
mapchars,nomapchars,nolock,servernetbiosname=<SRV_RFC1001NAME>
directio,nounix,cifsacl,sec=<authentication mechanism>,sign

Options not needed for servers supporting CIFS Unix extensions
(e.g. unneeded for mounts to most Samba versions):
uid=<uid>,gid=<gid>,dir_mode=<mode>,file_mode=<mode>,sfu

Rarely used options:
port=<tcpport>,rsize=<size>,wsize=<size>,unc=<unc_name>,ip=<ip_address>,
dev,nodev,nouser_xattr,netbiosname=<OUR_RFC1001NAME>,hard,soft,intr,
nointr,ignorecase,noposixpaths,noacl,prefixpath=<path>,nobrl
in6_addr

Options are described in more detail in the manual page
man 8 mount.cifs

To display the version number of the mount helper:
/sbin/mount.cifs -V

Usage: /sbin/umount.cifs <remotetarget> <dir>

Unmount the specified directory

Less commonly used options:
-r If mount fails, retry with readonly remount.
Do not write to mtab.-f Attempt a forced unmount, even if the fs is busy.
-l Attempt lazy unmount, Unmount now, cleanup later.
-v Enable verbose mode (may be useful for debugging).
-h Display this help.

Options are described in more detail in the manual page
man 8 umount.cifs

To display the version number of the cifs umount utility:
/sbin/umount.cifs -V

Invoking the umount utility on cifs mounts, can execute /sbin/umount.cifs (if present and umount -i is not specified.
HELLO NXSERVER - Version 3.2.0-74-SVN OS (GPL, using backend: 3.4.0)
<--- done]
Спасибо сказали:

foxbe
Сообщения: 84
ОС: Ubuntu 10.04

Re: Печать с Win клиента

Сообщение foxbe »

Как-то не очень похоже на вывод командs /etc/init.d/freenx-server check
Должно быть примерно так:
foxbe@servernp:~$ sudo /etc/init.d/freenx-server check

----> Testing your nxserver configuration ...
Warning: Invalid value "KDE_PRINTRC=/home/foxbe/.kde/share/config/kdeprintrc". ENABLE_KDE_CUPS will not work.
For root it's normal. Try to run 'nxloadconfig --check' by user.
Warning: Invalid value "DEFAULT_X_SESSION=/etc/X11/xdm/Xsession"
Users might not be able to request a default X session.
Warning: Invalid value "COMMAND_START_KDE=startkde"
Users will not be able to request a KDE session.
Warning: Invalid value "COMMAND_START_GNOME=gnome-session"
Users will not be able to request a Gnome session.
Warning: Invalid value "COMMAND_XTERM=xterm"
Users will not be able to request an xterm session.

Warnings occured during config check.
To enable these features please correct the configuration file.

<---- done

----> Testing your nxserver connection ...
HELLO NXSERVER - Version 3.2.0-74-SVN OS (GPL, using backend: 3.4.0)
<--- done
Спасибо сказали:

ShotSDV
Сообщения: 142
ОС: Mandriva

Re: Печать с Win клиента

Сообщение ShotSDV »

Если клиенты и сервер в одной локальной сети, то проще на винде принтер расшарить, а на сервере его в CUPS подключить, как smb-принтер, и отдать этому клиенту. Через клиента RX нормально работают тока умные принтеры, у которых внутри свой процессор стоит, а так всё будет работать весьма нестабильно.
Спасибо сказали:

JohnConnor
Сообщения: 5

Re: Печать с Win клиента

Сообщение JohnConnor »

foxbe писал(а):
21.04.2011 20:42
Как-то не очень похоже на вывод командs /etc/init.d/freenx-server check
Должно быть примерно так:
foxbe@servernp:~$ sudo /etc/init.d/freenx-server check

----> Testing your nxserver configuration ...
Warning: Invalid value "KDE_PRINTRC=/home/foxbe/.kde/share/config/kdeprintrc". ENABLE_KDE_CUPS will not work.
For root it's normal. Try to run 'nxloadconfig --check' by user.
Warning: Invalid value "DEFAULT_X_SESSION=/etc/X11/xdm/Xsession"
Users might not be able to request a default X session.
Warning: Invalid value "COMMAND_START_KDE=startkde"
Users will not be able to request a KDE session.
Warning: Invalid value "COMMAND_START_GNOME=gnome-session"
Users will not be able to request a Gnome session.
Warning: Invalid value "COMMAND_XTERM=xterm"
Users will not be able to request an xterm session.

Warnings occured during config check.
To enable these features please correct the configuration file.

<---- done

----> Testing your nxserver connection ...
HELLO NXSERVER - Version 3.2.0-74-SVN OS (GPL, using backend: 3.4.0)
<--- done

меня самого это сильно удивило, но это вывод именно этой команды! жду когда разработчики посмотрят и подскажут в чем проблема
Спасибо сказали:

foxbe
Сообщения: 84
ОС: Ubuntu 10.04

Re: Печать с Win клиента

Сообщение foxbe »

Вот ссылка по установке и настройке http://kb.etersoft.ru/Установка_1с77_на_се...ерминалов_Linux.
Настрой будут здесь: /etc/nxserver/node.conf.d и разбиты по категориям.
У меня стоит сервер на Ubuntu 10.04 amd64 - 9 клиентов на Linux и 5 на win, удаленные и локальные. Все ОК, коме Win7 клиента. С него не идет печать. Ругается на какието ограничения в win7.
Спасибо сказали: