ну устал уже искать
вот скрин к примеру
хочу прикрутить к fedora
Gnome менюшка внизу как в mac OS
Модератор: Модераторы разделов
Re: Gnome менюшка внизу как в mac OS
HP 255 G4 A6-6310 + Linux Mint 18.1 + Windoze7 under VmWare + OS X Mavericks under VmWare
- Bizdelnick
- Модератор
- Сообщения: 20793
- Статус: nulla salus bello
- ОС: Debian GNU/Linux
Re: Gnome менюшка внизу как в mac OS
То, что на скрине, смахивает на kiba-dock. Мне больше нравится cairo-dock, хотя он и глючноват, и настраивается через ужасный интерфейс. Но к макосёвому доку всё-таки ближе.
Пишите правильно:
в консоли вку́пе (с чем-либо) в общем вообще | в течение (часа) новичок нюанс по умолчанию | приемлемо проблема пробовать трафик |
Re: Gnome менюшка внизу как в mac OS
огромное вам спасибо!
Re: Gnome менюшка внизу как в mac OS
собираю для феди kiba-dock...столкнулся с маленькой проблемкой на последнем шаге
по данному HOW-to собрал akamaru kiba-dock kiba-plugins, а вот kiba-dbus собрать не могу
видимо он сравнивает версии установленного kiba-dock и той которая нужна, 9999.0.0 и 9999 для него существенно отличаются
как исправить?
по данному HOW-to собрал akamaru kiba-dock kiba-plugins, а вот kiba-dbus собрать не могу
Код: Выделить всё
[root@localhost kiba-dock]# cd kiba-dbus*
[root@localhost kiba-dbus-plugins]# ./autogen.sh --prefix=/usr --exec-prefix=/usr
Generating configuration files for kiba-dbus-plugins, please wait....
Running libtoolize, please ignore non-fatal messages....
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: You should add the contents of the following files to `aclocal.m4':
libtoolize: `/usr/share/aclocal/libtool.m4'
libtoolize: `/usr/share/aclocal/ltoptions.m4'
libtoolize: `/usr/share/aclocal/ltversion.m4'
libtoolize: `/usr/share/aclocal/ltsugar.m4'
libtoolize: `/usr/share/aclocal/lt~obsolete.m4'
libtoolize: Remember to add `LT_INIT' to configure.ac.
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
You should add the contents of '/usr/share/aclocal/intltool.m4' to 'aclocal.m4'.
configure.ac:12: installing `./install-sh'
configure.ac:12: installing `./missing'
Running ./configure --prefix=/usr --exec-prefix=/usr
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... none
checking for library containing strerror... none required
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ISO C89... (cached) none needed
checking dependency style of gcc... (cached) none
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for size_t... yes
checking whether time.h and sys/time.h may both be included... yes
checking for stdbool.h that conforms to C99... yes
checking for _Bool... yes
checking whether NLS is requested... yes
checking for intltool >= 0.35.0... 0.41.0 found
checking for intltool-update... /usr/bin/intltool-update
checking for intltool-merge... /usr/bin/intltool-merge
checking for intltool-extract... /usr/bin/intltool-extract
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for perl... /usr/bin/perl
checking for perl >= 5.8.1... 5.10.0
checking for XML::Parser... ok
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking for LC_MESSAGES... yes
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking for ngettext in libc... yes
checking for dgettext in libc... yes
checking for bind_textdomain_codeset... yes
checking for msgfmt... (cached) /usr/bin/msgfmt
checking for dcgettext... yes
checking if msgfmt accepts -c... yes
checking for gmsgfmt... (cached) /usr/bin/msgfmt
checking for xgettext... (cached) /usr/bin/xgettext
checking for python... /usr/bin/python
checking for python version... 2.6
checking for python platform... linux2
checking for python script directory... ${prefix}/lib/python2.6/site-packages
checking for python extension module directory... ${exec_prefix}/lib/python2.6/site-packages
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for PYGTK... yes
checking for KIBA_DOCK... configure: error: Package requirements (kiba-dock = 9999) were not met:
Requested 'kiba-dock = 9999' but version of kiba-dock is 9999.0.0
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables KIBA_DOCK_CFLAGS
and KIBA_DOCK_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
видимо он сравнивает версии установленного kiba-dock и той которая нужна, 9999.0.0 и 9999 для него существенно отличаются
как исправить?
- Bizdelnick
- Модератор
- Сообщения: 20793
- Статус: nulla salus bello
- ОС: Debian GNU/Linux
Re: Gnome менюшка внизу как в mac OS
Посмотреть, что предлагает для этого ./configure --help
Пишите правильно:
в консоли вку́пе (с чем-либо) в общем вообще | в течение (часа) новичок нюанс по умолчанию | приемлемо проблема пробовать трафик |
Re: Gnome менюшка внизу как в mac OS
предлагает следующее
да и еще добавить хочу)
в HOW-To написано что только akamaru надо собирать с префиксами ./autogen.sh --prefix=/usr --exec-prefix=/usr
я же собирал и другие пакеты так (kiba-dock, kiba-plugins).... иначе kiba-plugins не нашел бы установленный kiba-dock
надеюсь это не влияет никак
-------------------------------
значит пришлось изменить версию самого kiba-dock и kiba-plugins на версию 9999 в configure файлах
получилось вот что
Код: Выделить всё
[root@localhost kiba-dbus-plugins]# ./configure --help
`configure' configures kiba-dbus-plugins 0.1 to adapt to many kinds of systems.
Usage: ./configure [OPTION]... [VAR=VALUE]...
To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE. See below for descriptions of some of the useful variables.
Defaults for the options are specified in brackets.
Configuration:
-h, --help display this help and exit
--help=short display options specific to this package
--help=recursive display the short help of all the included packages
-V, --version display version information and exit
-q, --quiet, --silent do not print `checking...' messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for `--cache-file=config.cache'
-n, --no-create do not create output files
--srcdir=DIR find the sources in DIR [configure dir or `..']
Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
[/usr/local]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[PREFIX]
By default, `make install' will install all the files in
`/usr/local/bin', `/usr/local/lib' etc. You can specify
an installation prefix other than `/usr/local' using `--prefix',
for instance `--prefix=$HOME'.
For better control, use the options below.
Fine tuning of the installation directories:
--bindir=DIR user executables [EPREFIX/bin]
--sbindir=DIR system admin executables [EPREFIX/sbin]
--libexecdir=DIR program executables [EPREFIX/libexec]
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
--datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
--datadir=DIR read-only architecture-independent data [DATAROOTDIR]
--infodir=DIR info documentation [DATAROOTDIR/info]
--localedir=DIR locale-dependent data [DATAROOTDIR/locale]
--mandir=DIR man documentation [DATAROOTDIR/man]
--docdir=DIR documentation root
[DATAROOTDIR/doc/kiba-dbus-plugins]
--htmldir=DIR html documentation [DOCDIR]
--dvidir=DIR dvi documentation [DOCDIR]
--pdfdir=DIR pdf documentation [DOCDIR]
--psdir=DIR ps documentation [DOCDIR]
Program names:
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
--program-transform-name=PROGRAM run sed PROGRAM on installed program names
Optional Features:
--disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
--disable-dependency-tracking speeds up one-time build
--enable-dependency-tracking do not reject slow dependency extractors
--disable-nls do not use Native Language Support
Some influential environment variables:
CC C compiler command
CFLAGS C compiler flags
LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
nonstandard directory <lib dir>
LIBS libraries to pass to the linker, e.g. -l<library>
CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
you have headers in a nonstandard directory <include dir>
CPP C preprocessor
PKG_CONFIG path to pkg-config utility
PYGTK_CFLAGS
C compiler flags for PYGTK, overriding pkg-config
PYGTK_LIBS linker flags for PYGTK, overriding pkg-config
KIBA_DOCK_CFLAGS
C compiler flags for KIBA_DOCK, overriding pkg-config
KIBA_DOCK_LIBS
linker flags for KIBA_DOCK, overriding pkg-config
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
Report bugs to <danielb@kiba-dock.org>.
да и еще добавить хочу)
в HOW-To написано что только akamaru надо собирать с префиксами ./autogen.sh --prefix=/usr --exec-prefix=/usr
я же собирал и другие пакеты так (kiba-dock, kiba-plugins).... иначе kiba-plugins не нашел бы установленный kiba-dock
надеюсь это не влияет никак
-------------------------------
значит пришлось изменить версию самого kiba-dock и kiba-plugins на версию 9999 в configure файлах
получилось вот что
- Bizdelnick
- Модератор
- Сообщения: 20793
- Статус: nulla salus bello
- ОС: Debian GNU/Linux
Re: Gnome менюшка внизу как в mac OS
Ну хоть тут такого и не написано, но можно попробовать так:(autogen.sh ещё раз запускать смысла нет.)
Upd. Ну вот, пока писал, сами разобрались
Код: Выделить всё
KIBA_DOCK_VERSION=9999 ./configure --prefix=/usr --exec-prefix=/usr
Upd. Ну вот, пока писал, сами разобрались
Пишите правильно:
в консоли вку́пе (с чем-либо) в общем вообще | в течение (часа) новичок нюанс по умолчанию | приемлемо проблема пробовать трафик |
-
- Сообщения: 285
- ОС: Ubuntu 9.10
Re: Gnome менюшка внизу как в mac OS
Собственно, советую Cairo-dock. Проблем с ним нету, а сам он очень красивый и функциональный.
Re: Gnome менюшка внизу как в mac OS
Всего лишь 26 литров пива достаточно человеку для удовлетворения ежедневной потребности в кальции. Здоровое питание - это так просто!
http://atolstoy.wordpress.com
http://atolstoy.wordpress.com