NickLion писал(а): ↑21.07.2013 11:37
Нет, не проверял, мне KDE SC 4 нравится. Но у нас на форуме есть как минимум Nxx и PVOzerski, которые используют KDE3 в openSUSE. Обратитесь к ним, если какие-то проблемы.
Что за страшные параметры. Всегда запускал без параметров и не запускал xconfig, всё работало. Но вообще, вопрос, зачем Вы используете установщик (да ещё и такой старой версии), а не репозиторий ftp://download.nvidia.com/opensuse/12.3/ ?
Фантом, наверное, тоже ничего не проверял, но тоже написал, не попробовав даже сделать пару лишних щелчков мышью...
Если нет KDE3 в дистр-е, то это уже однозначно очевидная проблема для устанавливающих с дистр-а на комп. без И-нета.
Здесь же проблема может быть, если подключить репозиторий KDE3 и установить, а вариант загрузки с KDE3 не появится (что мы пока ещё не пробовали сделать).
Параметры (на память), предотвращающие при установке проверку обновлений, задавание вопросов и подключающие драйвер после установки (если драйвер уже установлен, но нужно подключить к текущему ядру, то лучше использовать -aqK). Но проблема не в этом (запускали, естественно, и без параметров), а в том, что написано в описании к ним:
INTERACTION WITH THE NOUVEAU DRIVER
Q. What is Nouveau, and why do I need to disable it?
A. Nouveau is a display driver for NVIDIA GPUs, developed as an open-source
project through reverse-engineering of the NVIDIA driver. It ships with
many current Linux distributions as the default display driver for NVIDIA
hardware. It is not developed or supported by NVIDIA, and is not related to
the NVIDIA driver, other than the fact that both Nouveau and the NVIDIA
driver are capable of driving NVIDIA GPUs. Only one driver can control a
GPU at a time, so if a GPU is being driven by the Nouveau driver, Nouveau
must be disabled before installing the NVIDIA driver.
Nouveau performs modesets in the kernel. This can make disabling Nouveau
difficult, as the kernel modeset is used to display a framebuffer console,
which means that Nouveau will be in use even if X is not running. As long
as Nouveau is in use, its kernel module cannot be unloaded, which will
prevent the NVIDIA kernel module from loading. It is therefore important to
make sure that Nouveau's kernel modesetting is disabled before installing
the NVIDIA driver.
Q. How do I prevent Nouveau from loading and performing a kernel modeset?
A. A simple way to prevent Nouveau from loading and performing a kernel
modeset is to add configuration directives for the module loader to a file
in '/etc/modprobe.d/'. These configuration directives can technically be
added to any file in '/etc/modprobe.d/', but many of the existing files in
that directory are provided and maintained by your distributor, which may
from time to time provide updated configuration files which could conflict
with your changes. Therefore, it is recommended to create a new file, for
example, '/etc/modprobe.d/disable-nouveau.conf', rather than editing one of
the existing files, such as the popular '/etc/modprobe.d/blacklist.conf'.
Note that some module loaders will only look for configuration directives
in files whose names end with '.conf', so if you are creating a new file,
make sure its name ends with '.conf'.
Whether you choose to create a new file or edit an existing one, the
following two lines will need to be added:
blacklist nouveau
options nouveau modeset=0
The first line will prevent Nouveau's kernel module from loading
automatically at boot. It will not prevent manual loading of the module,
and it will not prevent the X server from loading the kernel module; see
"How do I prevent the X server from loading Nouveau?" below. The second
line will prevent Nouveau from doing a kernel modeset. Without the kernel
modeset, it is possible to unload Nouveau's kernel module, in the event
that it is accidentally or intentionally loaded.
You will need to reboot your system after adding these configuration
directives in order for them to take effect.
If nvidia-installer detects Nouveau is in use by the system, it will offer
to create such a modprobe configuration file to disable Nouveau.
Q. What if my initial ramdisk image contains Nouveau?
A. Some distributions, particularly recent Red Hat/Fedora distributions,
include Nouveau in an initial ramdisk image (henceforth referred to as
"initrd" in this document, and sometimes also known as "initramfs"), so
that Nouveau's kernel modeset can take place as early as possible in the
boot process. This poses an additional challenge to those who wish to
prevent the modeset from occurring, as the modeset will occur while the
system is executing within the initrd, before the directives in
'/etc/modprobe.d' are processed.
If you have an initrd which loads the Nouveau driver, you will additionally
need to ensure that Nouveau is disabled in the initrd. If your initrd
understands the rdblacklist parameter, you can add the option
rdblacklist=nouveau to your kernel's boot parameters. This should be done
in your bootloader's configuration file(s), so that the option gets passed
to your kernel every time the system is booted. Please consult your
distribution's documentation on how to configure your bootloader, as
different distributions use different configuration files.
An alternative is to rebuild your initrd without Nouveau. If you choose
this option instead of configuring your bootloader, please consult your
distribution's documentation on how to rebuild the initrd, as different
distributions have different tools for building and modifying the initrd.
Q. How do I prevent the X server from loading Nouveau?
A. Blacklisting Nouveau will only prevent it from being loaded automatically
at boot. If an X server is started as part of the normal boot process, and
that X server uses the Nouveau X driver, then the Nouveau kernel module
will still be loaded. Should this happen, you will be able to unload
Nouveau with `modprobe -r nouveau` after stopping the X server, as long as
you have taken care to prevent it from doing a kernel modeset; however, it
is probably better to just make sure that X does not load Nouveau in the
first place.
If your system is not configured to start an X server at boot, then you can
simply run the NVIDIA driver installer after rebooting. Otherwise, the
easiest thing to do is to edit your X server's configuration file so that
your X server uses a non-modesetting driver that is compatible with your
card, such as the 'vesa' driver. You can then stop X and and install the
driver as usual. Please consult your X server's documentation to determine
where your X server configuration file is located.
И ftp здесь не работает, и речь пока идёт о версии 11.4...