модем Huawei E 1550

[demsl]

есть вот такой сабж (Huawei E 1550), под Убунтой устанавливается без проблем, работает. НО - до первого выключения/перезагрузки. Потом - в настройках сети видно "широкополосное мобильное подключение", но не работает ни в какую, галочки на "подключать автоматически" и "для всех пользователей" стоят. Проверено на 2 машинах(((
help plz...

[Rootlexx]

Покажите вывод следующих команд при подключённом устройстве:

Код: Выделить всё

lsusb
dmesg
grep -i net /var/log/daemon.log

[demsl]

извиняюсь за размер поста. второй спойлер не фурычит(


lsusb

Код: Выделить всё

Bus 001 Device 003: ID 12d1:140c Huawei Technologies Co., Ltd.
Bus 001 Device 002: ID 1307:0330 Transcend Information, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

dmesg

Код: Выделить всё

[    0.000000] BIOS EBDA/lowmem at: 0009fc00/0009b000
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.28-17-generic (buildd@rothera) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #58-Ubuntu SMP Tue Dec 1 18:57:07 UTC 2009 (Ubuntu 2.6.28-17.58-generic)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009b000 (usable)
[    0.000000]  BIOS-e820: 000000000009b000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e9c20 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
[    0.000000]  BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007ffbe000 - 000000007ffe0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.4 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around.
[    0.000000] last_pfn = 0x7ffb0 max_arch_pfn = 0x100000
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009b000 (usable)
[    0.000000]  modified: 000000000009b000 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e9c20 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000007ffb0000 (usable)
[    0.000000]  modified: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
[    0.000000]  modified: 000000007ffbe000 - 000000007ffe0000 (ACPI NVS)
[    0.000000]  modified: 000000007ffe0000 - 0000000080000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  modified: 00000000fecc0000 - 00000000fecc1000 (reserved)
[    0.000000]  modified: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[    0.000000] RAMDISK: 3781a000 - 37fef49a
[    0.000000] Allocated new RAMDISK: 0087d000 - 0105249a
[    0.000000] Move RAMDISK from 000000003781a000 - 0000000037fef499 to 0087d000 - 01052499
[    0.000000] ACPI: RSDP 000FA8B0, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT 7FFB0000, 0040 (r1 103007 RSDT1341 20071030 MSFT       97)
[    0.000000] ACPI: FACP 7FFB0200, 0084 (r2 103007 FACP1341 20071030 MSFT       97)
[    0.000000] ACPI: DSDT 7FFB0490, 547E (r1  A0692 A0692000        0 INTL 20051117)
[    0.000000] ACPI: FACS 7FFBE000, 0040
[    0.000000] ACPI: APIC 7FFB0390, 0068 (r1 103007 APIC1341 20071030 MSFT       97)
[    0.000000] ACPI: MCFG 7FFB0400, 003C (r1 103007 OEMMCFG  20071030 MSFT       97)
[    0.000000] ACPI: WDRT 7FFB0440, 0047 (r1 103007 VT-8237S 20071030 MSFT       97)
[    0.000000] ACPI: OEMB 7FFBE040, 0075 (r1 103007 OEMB1341 20071030 MSFT       97)
[    0.000000] ACPI: HPET 7FFB5910, 0038 (r1 103007 VT-8237S 20071030 MSFT       97)
[    0.000000] ACPI: SSDT 7FFB5950, 00F4 (r1 A_M_I_ POWERNOW        1 AMD         1)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1163MB HIGHMEM available.
[    0.000000] 883MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 373fe000
[    0.000000]   low ram: 00000000 - 373fe000
[    0.000000]   bootmap 00012000 - 00018e80
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008780ac]    TEXT DATA BSS ==> [0000100000 - 00008780ac]
[    0.000000]   #4 [0000879000 - 000087d000]    INIT_PG_TABLE ==> [0000879000 - 000087d000]
[    0.000000]   #5 [000009b000 - 0000100000]    BIOS reserved ==> [000009b000 - 0000100000]
[    0.000000]   #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
[    0.000000]   #7 [000087d000 - 000105249a]      NEW RAMDISK ==> [000087d000 - 000105249a]
[    0.000000]   #8 [0000012000 - 0000019000]          BOOTMAP ==> [0000012000 - 0000019000]
[    0.000000] found SMP MP-table at [c00ff780] 000ff780
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000373fe
[    0.000000]   HighMem  0x000373fe -> 0x0007ffb0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009b
[    0.000000]     0: 0x00000100 -> 0x0007ffb0
[    0.000000] On node 0 totalpages: 524091
[    0.000000] free_area_init_node: node 0, pgdat c06cb780, node_mem_map c1053200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3947 pages, LIFO batch:0
[    0.000000]   Normal zone: 1736 pages used for memmap
[    0.000000]   Normal zone: 220470 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2328 pages used for memmap
[    0.000000]   HighMem zone: 295578 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 2 I/O APICs
[    0.000000] ACPI: HPET id: 0x11068201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ea000
[    0.000000] PM: Registered nosave memory: 00000000000ea000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
[    0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[    0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519995
[    0.000000] Kernel command line: root=UUID=2ae5aecf-472f-43da-a40e-cdf1604c93ec ro quiet splash
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2001.341 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] allocated 10483840 bytes of page_cgroup
[    0.004000] please try cgroup_disable=memory option if you don't want
[    0.004000] Scanning for low memory corruption every 60 seconds
[    0.004000] Memory: 2052224k/2096832k available (4116k kernel code, 43264k reserved, 2199k data, 532k init, 1191624k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xffc77000 - 0xfffff000   (3616 kB)
[    0.004000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.004000]     vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
[    0.004000]       .init : 0xc0733000 - 0xc07b8000   ( 532 kB)
[    0.004000]       .data : 0xc050525d - 0xc072ae60   (2199 kB)
[    0.004000]       .text : 0xc0100000 - 0xc050525d   (4116 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.004000] hpet clockevent registered
[    0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4002.68 BogoMIPS (lpj=8005364)
[    0.004000] Security Framework initialized
[    0.004000] SELinux:  Disabled at boot.
[    0.004000] AppArmor: AppArmor initialized
[    0.004000] Mount-cache hash table entries: 512
[    0.004000] Initializing cgroup subsys ns
[    0.004000] Initializing cgroup subsys cpuacct
[    0.004000] Initializing cgroup subsys memory
[    0.004000] Initializing cgroup subsys freezer
[    0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.004000] CPU: L2 Cache: 256K (64 bytes/line)
[    0.004000] using C1E aware idle routine
[    0.004000] Checking 'hlt' instruction... OK.
[    0.016606] SMP alternatives: switching to UP code
[    0.138262] ACPI: Core revision 20080926
[    0.140684] ACPI: Checking initramfs for custom DSDT
[    0.448540] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.488452] CPU0: AMD Sempron(tm) Processor LE-1150 stepping 01
[    0.492001] Brought up 1 CPUs
[    0.492001] Total of 1 processors activated (4002.68 BogoMIPS).
[    0.492001] CPU0 attaching NULL sched-domain.
[    0.492001] net_namespace: 776 bytes
[    0.492001] Booting paravirtualized kernel on bare hardware
[    0.492001] Time: 21:25:31  Date: 12/21/10
[    0.492001] regulator: core version 0.5
[    0.492001] NET: Registered protocol family 16
[    0.492001] EISA bus registered
[    0.492001] ACPI: bus type pci registered
[    0.492001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.492001] PCI: Not using MMCONFIG.
[    0.492001] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[    0.492001] PCI: Using configuration type 1 for base access
[    0.492001] ACPI: EC: Look up EC in DSDT
[    0.501341] ACPI: Interpreter enabled
[    0.501346] ACPI: (supports S0 S1 S3 S4 S5)
[    0.501367] ACPI: Using IOAPIC for interrupt routing
[    0.501425] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.507713] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.507715] PCI: Using MMCONFIG for extended config space
[    0.517147] ACPI: No dock devices found.
[    0.517215] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.517286] pci 0000:00:00.0: reg 10 32bit mmio: [0xc0000000-0xcfffffff]
[    0.517648] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.517652] pci 0000:00:02.0: PME# disabled
[    0.517696] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.517700] pci 0000:00:03.0: PME# disabled
[    0.517747] pci 0000:00:0f.0: reg 10 io port: [0xcc00-0xcc07]
[    0.517753] pci 0000:00:0f.0: reg 14 io port: [0xc880-0xc883]
[    0.517760] pci 0000:00:0f.0: reg 18 io port: [0xc800-0xc807]
[    0.517766] pci 0000:00:0f.0: reg 1c io port: [0xc480-0xc483]
[    0.517772] pci 0000:00:0f.0: reg 20 io port: [0xc400-0xc40f]
[    0.517778] pci 0000:00:0f.0: reg 24 io port: [0xc000-0xc0ff]
[    0.517834] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f]
[    0.517900] pci 0000:00:10.0: reg 20 io port: [0xb480-0xb49f]
[    0.517915] pci 0000:00:10.0: supports D1 D2
[    0.517917] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.517921] pci 0000:00:10.0: PME# disabled
[    0.517964] pci 0000:00:10.1: reg 20 io port: [0xb800-0xb81f]
[    0.517980] pci 0000:00:10.1: supports D1 D2
[    0.517982] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.517985] pci 0000:00:10.1: PME# disabled
[    0.518028] pci 0000:00:10.2: reg 20 io port: [0xb880-0xb89f]
[    0.518044] pci 0000:00:10.2: supports D1 D2
[    0.518046] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.518049] pci 0000:00:10.2: PME# disabled
[    0.518092] pci 0000:00:10.3: reg 20 io port: [0xbc00-0xbc1f]
[    0.518108] pci 0000:00:10.3: supports D1 D2
[    0.518109] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.518113] pci 0000:00:10.3: PME# disabled
[    0.518146] pci 0000:00:10.4: reg 10 32bit mmio: [0xfbcffc00-0xfbcffcff]
[    0.518178] pci 0000:00:10.4: supports D1 D2
[    0.518180] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.518183] pci 0000:00:10.4: PME# disabled
[    0.518326] pci 0000:00:12.0: reg 10 io port: [0xb000-0xb0ff]
[    0.518333] pci 0000:00:12.0: reg 14 32bit mmio: [0xfbcff800-0xfbcff8ff]
[    0.518361] pci 0000:00:12.0: supports D1 D2
[    0.518363] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.518367] pci 0000:00:12.0: PME# disabled
[    0.518587] pci 0000:02:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
[    0.518597] pci 0000:02:00.0: reg 18 64bit mmio: [0xfbde0000-0xfbdeffff]
[    0.518604] pci 0000:02:00.0: reg 20 io port: [0xd800-0xd8ff]
[    0.518614] pci 0000:02:00.0: reg 30 32bit mmio: [0xfbdc0000-0xfbddffff]
[    0.518622] pci 0000:02:00.0: supports D1 D2
[    0.518658] pci 0000:02:00.1: reg 10 64bit mmio: [0xfbdf0000-0xfbdfffff]
[    0.518686] pci 0000:02:00.1: supports D1 D2
[    0.518735] pci 0000:00:02.0: bridge io port: [0xd000-0xdfff]
[    0.518739] pci 0000:00:02.0: bridge 32bit mmio: [0xfbd00000-0xfbdfffff]
[    0.518745] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[    0.518826] pci 0000:04:06.0: reg 10 32bit mmio: [0xfbeffc00-0xfbeffcff]
[    0.518833] pci 0000:04:06.0: reg 14 io port: [0xec00-0xec07]
[    0.518839] pci 0000:04:06.0: reg 18 io port: [0xe800-0xe8ff]
[    0.518863] pci 0000:04:06.0: supports D2
[    0.518865] pci 0000:04:06.0: PME# supported from D2 D3hot D3cold
[    0.518869] pci 0000:04:06.0: PME# disabled
[    0.518901] pci 0000:00:13.1: transparent bridge
[    0.518904] pci 0000:00:13.1: bridge io port: [0xe000-0xefff]
[    0.518908] pci 0000:00:13.1: bridge 32bit mmio: [0xfbe00000-0xfbefffff]
[    0.518929] bus 00 -> node 0
[    0.518935] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.519171] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[    0.519261] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[    0.519422] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.519511] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
[    0.519621] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
[    0.538527] ACPI: PCI Root Bridge [PCI1] (0000:20)
[    0.538575] pci 0000:20:01.0: reg 10 64bit mmio: [0xfbffc000-0xfbffffff]
[    0.538600] pci 0000:20:01.0: PME# supported from D0 D3hot D3cold
[    0.538603] pci 0000:20:01.0: PME# disabled
[    0.538643] bus 20 -> node 0
[    0.538647] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[    0.539172] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.539310] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.539443] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.539574] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.539706] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.539852] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.539995] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.540146] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.540295] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - E9, should be DC [20080926]
[    0.540327] ACPI: WMI: Mapper loaded
[    0.540521] SCSI subsystem initialized
[    0.540559] libata version 3.00 loaded.
[    0.540602] usbcore: registered new interface driver usbfs
[    0.540619] usbcore: registered new interface driver hub
[    0.540641] usbcore: registered new device driver usb
[    0.540741] PCI: Using ACPI for IRQ routing
[    0.540863] Bluetooth: Core ver 2.13
[    0.540863] NET: Registered protocol family 31
[    0.540863] Bluetooth: HCI device and connection manager initialized
[    0.540863] Bluetooth: HCI socket layer initialized
[    0.540863] NET: Registered protocol family 8
[    0.540863] NET: Registered protocol family 20
[    0.540863] NetLabel: Initializing
[    0.540863] NetLabel:  domain hash size = 128
[    0.540863] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.540863] NetLabel:  unlabeled traffic allowed by default
[    0.540863] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.540863] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.544098] AppArmor: AppArmor Filesystem Enabled
[    0.544103] pnp: PnP ACPI init
[    0.544103] ACPI: bus type pnp registered
[    0.548019] Switched to high resolution mode on CPU 0
[    0.550948] pnp: PnP ACPI: found 18 devices
[    0.550950] ACPI: ACPI bus type pnp unregistered
[    0.550954] PnPBIOS: Disabled by ACPI PNP
[    0.550965] system 00:05: ioport range 0x3e0-0x3e7 has been reserved
[    0.550968] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[    0.550970] system 00:05: ioport range 0x800-0x87f has been reserved
[    0.550973] system 00:05: ioport range 0x400-0x41f has been reserved
[    0.550976] system 00:05: iomem range 0xfecc0000-0xfecc0fff has been reserved
[    0.550979] system 00:05: iomem range 0xfed02000-0xfed02fff has been reserved
[    0.550987] system 00:09: ioport range 0xc00-0xc0f has been reserved
[    0.550989] system 00:09: ioport range 0xd00-0xd0f has been reserved
[    0.550992] system 00:09: ioport range 0xa20-0xa2f has been reserved
[    0.550994] system 00:09: ioport range 0xa30-0xa3f has been reserved
[    0.551000] system 00:0e: iomem range 0xfec00000-0xfec00fff has been reserved
[    0.551003] system 00:0e: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.551008] system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved
[    0.551013] system 00:10: iomem range 0x0-0x9ffff could not be reserved
[    0.551016] system 00:10: iomem range 0xe0000-0xfffff could not be reserved
[    0.551019] system 00:10: iomem range 0x100000-0x7fffffff could not be reserved
[    0.551021] system 00:10: iomem range 0xfc000000-0xffffffff could not be reserved
[    0.585708] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.585710] pci 0000:00:01.0:   IO window: disabled
[    0.585715] pci 0000:00:01.0:   MEM window: disabled
[    0.585718] pci 0000:00:01.0:   PREFETCH window: disabled
[    0.585724] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
[    0.585727] pci 0000:00:02.0:   IO window: 0xd000-0xdfff
[    0.585732] pci 0000:00:02.0:   MEM window: 0xfbd00000-0xfbdfffff
[    0.585736] pci 0000:00:02.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[    0.585741] pci 0000:00:03.0: PCI bridge, secondary bus 0000:03
[    0.585743] pci 0000:00:03.0:   IO window: disabled
[    0.585748] pci 0000:00:03.0:   MEM window: disabled
[    0.585752] pci 0000:00:03.0:   PREFETCH window: disabled
[    0.585758] pci 0000:00:13.1: PCI bridge, secondary bus 0000:04
[    0.585761] pci 0000:00:13.1:   IO window: 0xe000-0xefff
[    0.585766] pci 0000:00:13.1:   MEM window: 0xfbe00000-0xfbefffff
[    0.585769] pci 0000:00:13.1:   PREFETCH window: disabled
[    0.585782] pci 0000:00:01.0: setting latency timer to 64
[    0.585792] pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
[    0.585796] pci 0000:00:02.0: setting latency timer to 64
[    0.585804] pci 0000:00:03.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
[    0.585809] pci 0000:00:03.0: setting latency timer to 64
[    0.585815] pci 0000:00:13.1: setting latency timer to 64
[    0.585819] bus: 00 index 0 io port: [0x00-0xffff]
[    0.585821] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[    0.585823] bus: 01 index 0 mmio: [0x0-0x0]
[    0.585825] bus: 01 index 1 mmio: [0x0-0x0]
[    0.585827] bus: 01 index 2 mmio: [0x0-0x0]
[    0.585828] bus: 01 index 3 mmio: [0x0-0x0]
[    0.585830] bus: 02 index 0 io port: [0xd000-0xdfff]
[    0.585832] bus: 02 index 1 mmio: [0xfbd00000-0xfbdfffff]
[    0.585834] bus: 02 index 2 mmio: [0xd0000000-0xdfffffff]
[    0.585836] bus: 02 index 3 mmio: [0x0-0x0]
[    0.585838] bus: 03 index 0 mmio: [0x0-0x0]
[    0.585840] bus: 03 index 1 mmio: [0x0-0x0]
[    0.585842] bus: 03 index 2 mmio: [0x0-0x0]
[    0.585843] bus: 03 index 3 mmio: [0x0-0x0]
[    0.585845] bus: 04 index 0 io port: [0xe000-0xefff]
[    0.585847] bus: 04 index 1 mmio: [0xfbe00000-0xfbefffff]
[    0.585849] bus: 04 index 2 mmio: [0x0-0x0]
[    0.585851] bus: 04 index 3 io port: [0x00-0xffff]
[    0.585853] bus: 04 index 4 mmio: [0x000000-0xffffffff]
[    0.585855] bus: 20 index 0 io port: [0x00-0xffff]
[    0.585857] bus: 20 index 1 mmio: [0x000000-0xffffffff]
[    0.585869] NET: Registered protocol family 2
[    0.586016] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.586290] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.587078] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.587489] TCP: Hash tables configured (established 131072 bind 65536)
[    0.587493] TCP reno registered
[    0.587604] NET: Registered protocol family 1
[    0.587749] checking if image is initramfs... it is
[    1.235871] Freeing initrd memory: 8021k freed
[    1.235978] cpufreq: No nForce2 chipset.
[    1.236127] audit: initializing netlink socket (disabled)
[    1.236143] type=2000 audit(1292966731.236:1): initialized
[    1.243932] highmem bounce pool size: 64 pages
[    1.243937] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.245499] VFS: Disk quotas dquot_6.5.1
[    1.245558] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.246251] fuse init (API version 7.10)
[    1.246334] msgmni has been set to 1698
[    1.246504] alg: No test for stdrng (krng)
[    1.246516] io scheduler noop registered
[    1.246518] io scheduler anticipatory registered
[    1.246520] io scheduler deadline registered
[    1.246537] io scheduler cfq registered (default)
[    1.246546] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[    1.246557] PCI: VIA PCI bridge detected.Disabling DAC.
[    1.246644] pci 0000:02:00.0: Boot video device
[    1.246739] pcieport-driver 0000:00:02.0: setting latency timer to 64
[    1.246772] pcieport-driver 0000:00:02.0: found MSI capability
[    1.246775] pci_express 0000:00:02.0:pcie00: allocate port service
[    1.246790] pci_express 0000:00:02.0:pcie01: allocate port service
[    1.246802] pci_express 0000:00:02.0:pcie02: allocate port service
[    1.246814] pci_express 0000:00:02.0:pcie03: allocate port service
[    1.246866] pcieport-driver 0000:00:03.0: setting latency timer to 64
[    1.246903] pcieport-driver 0000:00:03.0: found MSI capability
[    1.246906] pci_express 0000:00:03.0:pcie00: allocate port service
[    1.246918] pci_express 0000:00:03.0:pcie01: allocate port service
[    1.246929] pci_express 0000:00:03.0:pcie02: allocate port service
[    1.246941] pci_express 0000:00:03.0:pcie03: allocate port service
[    1.250012] aer 0000:00:02.0:pcie01: AER service couldn't init device: no _OSC support
[    1.252943] aer 0000:00:03.0:pcie01: AER service couldn't init device: no _OSC support
[    1.252952] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.253237] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.253362] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.253365] ACPI: Power Button (FF) [PWRF]
[    1.253412] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    1.253419] ACPI: Sleep Button (CM) [SLPB]
[    1.253456] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    1.253458] ACPI: Power Button (CM) [PWRB]
[    1.253821] processor ACPI_CPU:00: registered as cooling_device0
[    1.253824] ACPI: Processor [P001] (supports 16 throttling states)
[    1.257872] isapnp: Scanning for PnP cards...
[    1.611723] isapnp: No Plug & Play device found
[    1.613480] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.613577] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.613931] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.614803] brd: module loaded
[    1.615176] loop: module loaded
[    1.615263] Fixed MDIO Bus: probed
[    1.615269] PPP generic driver version 2.4.2
[    1.615332] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    1.615363] Driver 'sd' needs updating - please use bus_type methods
[    1.615372] Driver 'sr' needs updating - please use bus_type methods
[    1.615534] sata_via 0000:00:0f.0: version 2.4
[    1.615556] sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.615598] sata_via 0000:00:0f.0: routed to hard irq line 10
[    1.615711] scsi0 : sata_via
[    1.615809] scsi1 : sata_via
[    1.617323] ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 21
[    1.617326] ata2: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 21
[    1.820017] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    2.032013] ata2: SATA link up 1.5 Gbps (SStatus 123 SControl 300)
[    2.235203] ata2.00: ATA-7: ST3160815AS, 4.AAB, max UDMA/133
[    2.235206] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.301854] ata2.00: configured for UDMA/133
[    2.301960] scsi 1:0:0:0: Direct-Access     ATA      ST3160815AS      4.AA PQ: 0 ANSI: 5
[    2.302059] sd 1:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[    2.302075] sd 1:0:0:0: [sda] Write Protect is off
[    2.302078] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.302101] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.302169] sd 1:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[    2.302182] sd 1:0:0:0: [sda] Write Protect is off
[    2.302185] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.302207] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.302212]  sda: sda1 sda2 < sda5 sda6 sda7 >
[    2.401401] sd 1:0:0:0: [sda] Attached SCSI disk
[    2.401460] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    2.401927] pata_via 0000:00:0f.1: version 0.3.3
[    2.402069] scsi2 : pata_via
[    2.402124] scsi3 : pata_via
[    2.403670] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    2.403673] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    2.596601] ata3.01: ATA-7: ST380215A, 3.AAD, max UDMA/100
[    2.596604] ata3.01: 156301488 sectors, multi 16: LBA48
[    2.663176] ata3.01: configured for UDMA/100
[    2.824411] ata4.00: ATAPI: ASUS    DRW-1608P2S, 1.22, max UDMA/66
[    2.824430] ata4.00: limited to UDMA/33 due to 40-wire cable
[    2.840314] ata4.00: configured for UDMA/33
[    2.846907] scsi 2:0:1:0: Direct-Access     ATA      ST380215A        3.AA PQ: 0 ANSI: 5
[    2.847007] sd 2:0:1:0: [sdb] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[    2.847022] sd 2:0:1:0: [sdb] Write Protect is off
[    2.847025] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    2.847046] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.847115] sd 2:0:1:0: [sdb] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[    2.847127] sd 2:0:1:0: [sdb] Write Protect is off
[    2.847129] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    2.847150] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.847155]  sdb: sdb2 < sdb5 >
[    2.873511] sd 2:0:1:0: [sdb] Attached SCSI disk
[    2.873560] sd 2:0:1:0: Attached scsi generic sg1 type 0
[    2.879738] scsi 3:0:0:0: CD-ROM            ASUS     DRW-1608P2S      1.22 PQ: 0 ANSI: 5
[    2.898069] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.898073] Uniform CD-ROM driver Revision: 3.20
[    2.898170] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    2.898212] sr 3:0:0:0: Attached scsi generic sg2 type 5
[    2.898369] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.898392] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[    2.898420] ehci_hcd 0000:00:10.4: EHCI Host Controller
[    2.898504] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[    2.898536] ehci_hcd 0000:00:10.4: debug port 1
[    2.898545] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfbcffc00
[    2.908023] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    2.908103] usb usb1: configuration #1 chosen from 1 choice
[    2.908132] hub 1-0:1.0: USB hub found
[    2.908141] hub 1-0:1.0: 8 ports detected
[    2.908261] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.908283] uhci_hcd: USB Universal Host Controller Interface driver
[    2.908326] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    2.908333] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    2.908380] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    2.908408] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000b480
[    2.908486] usb usb2: configuration #1 chosen from 1 choice
[    2.908511] hub 2-0:1.0: USB hub found
[    2.908528] hub 2-0:1.0: 2 ports detected
[    2.908619] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    2.908625] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    2.908670] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    2.908695] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000b800
[    2.908772] usb usb3: configuration #1 chosen from 1 choice
[    2.908798] hub 3-0:1.0: USB hub found
[    2.908805] hub 3-0:1.0: 2 ports detected
[    2.908894] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[    2.908899] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    2.908954] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    2.908972] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b880
[    2.909041] usb usb4: configuration #1 chosen from 1 choice
[    2.909064] hub 4-0:1.0: USB hub found
[    2.909072] hub 4-0:1.0: 2 ports detected
[    2.909161] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    2.909166] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    2.909206] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    2.909231] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000bc00
[    2.909295] usb usb5: configuration #1 chosen from 1 choice
[    2.909318] hub 5-0:1.0: USB hub found
[    2.909324] hub 5-0:1.0: 2 ports detected
[    2.909452] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    2.909795] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.909800] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.909924] mice: PS/2 mouse device common for all mice
[    2.910094] rtc_cmos 00:08: RTC can wake from S4
[    2.910127] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[    2.910163] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    2.910239] device-mapper: uevent: version 1.0.3
[    2.910358] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[    2.910403] device-mapper: multipath: version 1.0.5 loaded
[    2.910406] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.910491] EISA: Probing bus 0 at eisa.0
[    2.910529] EISA: Detected 0 cards.
[    2.910554] cpuidle: using governor ladder
[    2.910556] cpuidle: using governor menu
[    2.911023] TCP cubic registered
[    2.911123] NET: Registered protocol family 10
[    2.911503] lo: Disabled Privacy Extensions
[    2.911787] NET: Registered protocol family 17
[    2.911805] Bluetooth: L2CAP ver 2.11
[    2.911806] Bluetooth: L2CAP socket layer initialized
[    2.911809] Bluetooth: SCO (Voice Link) ver 0.6
[    2.911811] Bluetooth: SCO socket layer initialized
[    2.911841] Bluetooth: RFCOMM socket layer initialized
[    2.911849] Bluetooth: RFCOMM TTY layer initialized
[    2.911851] Bluetooth: RFCOMM ver 1.10
[    2.911875] powernow-k8: Found 1 AMD Sempron(tm) Processor LE-1150 processors (1 cpu cores) (version 2.20.00)
[    2.911917] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0xc
[    2.911919] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0xe
[    2.911921] powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
[    2.911962] Using IPI No-Shortcut mode
[    2.912089] registered taskstats version 1
[    2.912234]   Magic number: 6:219:450
[    2.912343] rtc_cmos 00:08: setting system clock to 2010-12-21 21:25:33 UTC (1292966733)
[    2.912346] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.912348] EDD information not available.
[    2.912753] Freeing unused kernel memory: 532k freed
[    2.912888] Write protecting the kernel text: 4120k
[    2.912941] Write protecting the kernel read-only data: 1524k
[    2.947301] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    3.003072] compcache: Compressed swap size set to: 515416 KB
[    3.003963] TLSF: pool: f7da8000, init_size=16384, max_size=0, grow_size=16384
[    3.220027] usb 1-7: new high speed USB device using ehci_hcd and address 2
[    3.478746] Floppy drive(s): fd0 is 1.44M
[    3.495968] FDC 0 is a post-1991 82077
[    3.502860] usb 1-7: configuration #1 chosen from 1 choice
[    3.612025] usb 1-8: new high speed USB device using ehci_hcd and address 3
[    3.712776] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[    3.712828] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.713506] eth0: VIA Rhine II at 0xfbcff800, 00:1e:8c:72:83:a9, IRQ 23.
[    3.714215] eth0: MII PHY found at address 1, status 0x7949 advertising 0de1 Link 0000.
[    3.758222] usb 1-8: configuration #1 chosen from 1 choice
[    4.035892] Adding 515412k swap on /dev/ramzswap0.  Priority:100 extents:1 across:515412k
[    4.167686] Initializing USB Mass Storage driver...
[    4.169502] scsi4 : SCSI emulation for USB Mass Storage devices
[    4.170003] usb-storage: device found at 2
[    4.170006] usb-storage: waiting for device to settle before scanning
[    4.171017] usb-storage: probe of 1-8:1.0 failed with error -5
[    4.171066] usb-storage: probe of 1-8:1.1 failed with error -5
[    4.171540] usb-storage: probe of 1-8:1.2 failed with error -5
[    4.172361] usb-storage: probe of 1-8:1.3 failed with error -5
[    4.172932] usb-storage: probe of 1-8:1.4 failed with error -1
[    4.176555] usb-storage: probe of 1-8:1.5 failed with error -1
[    4.176584] usbcore: registered new interface driver usb-storage
[    4.176588] USB Mass Storage support registered.
[    4.377835] PM: Starting manual resume from disk
[    4.377840] PM: Resume from partition 8:7
[    4.377842] PM: Checking hibernation image.
[    4.378019] PM: Resume from disk failed.
[    4.398181] kjournald starting.  Commit interval 5 seconds
[    4.398193] EXT3-fs: mounted filesystem with ordered data mode.
[    9.168146] usb-storage: device scan complete
[    9.168630] scsi 4:0:0:0: Direct-Access     Generic  USB  CF Reader   0.00 PQ: 0 ANSI: 2
[    9.168994] scsi 4:0:0:1: Direct-Access     Generic  USB  SD Reader   0.00 PQ: 0 ANSI: 2
[    9.169368] scsi 4:0:0:2: Direct-Access     Generic  USB  MS Reader   0.00 PQ: 0 ANSI: 2
[    9.169743] scsi 4:0:0:3: Direct-Access     Generic  USB  SM Reader   0.00 PQ: 0 ANSI: 2
[    9.170698] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[    9.170764] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    9.171419] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[    9.171458] sd 4:0:0:1: Attached scsi generic sg4 type 0
[    9.172176] sd 4:0:0:2: [sde] Attached SCSI removable disk
[    9.172214] sd 4:0:0:2: Attached scsi generic sg5 type 0
[    9.172912] sd 4:0:0:3: [sdf] Attached SCSI removable disk
[    9.172951] sd 4:0:0:3: Attached scsi generic sg6 type 0
[    9.716880] udev: starting version 141
[    9.906809] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.984830] parport_pc 00:04: reported by Plug and Play ACPI
[    9.984875] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   10.009519] Linux agpgart interface v0.103
[   10.123780] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0336]
[   10.123813] Aperture pointing to e820 RAM. Ignoring.
[   10.123819] agpgart-amd64 0000:00:00.0: aperture from AGP @ c0000000 size 256 MB
[   10.140965] agpgart-amd64 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[   10.704866] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   10.723211] usbcore: registered new interface driver usbserial
[   10.723258] USB Serial support registered for generic
[   10.723333] usbcore: registered new interface driver usbserial_generic
[   10.723335] usbserial: USB Serial Driver core
[   10.770105] USB Serial support registered for GSM modem (1-port)
[   10.770174] option 1-8:1.0: GSM modem (1-port) converter detected
[   10.770334] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB0
[   10.770346] option 1-8:1.1: GSM modem (1-port) converter detected
[   10.770494] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB1
[   10.770505] option 1-8:1.2: GSM modem (1-port) converter detected
[   10.770616] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB2
[   10.770626] option 1-8:1.3: GSM modem (1-port) converter detected
[   10.770737] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB3
[   10.770758] usbcore: registered new interface driver option
[   10.770761] option: v0.7.2:USB Driver for GSM modems
[   10.889699] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[   10.944774] ppdev: user-space parallel port driver
[   11.058090] HDA Intel 0000:20:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   11.058271] HDA Intel 0000:20:01.0: setting latency timer to 64
[   11.058276] HDA Intel 0000:20:01.0: PCI: Disallowing DAC for device
[   11.373751] psmouse serio1: ID: 10 00 64<6>lp0: using parport0 (interrupt-driven).
[   11.797116] Adding 554200k swap on /dev/sda7.  Priority:-1 extents:1 across:554200k
[   11.925306] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[   12.351579] EXT3 FS on sda6, internal journal
[   14.173137] type=1505 audit(1292959544.759:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2376
[   14.230588] type=1505 audit(1292959544.815:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2380
[   14.230760] type=1505 audit(1292959544.815:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2380
[   14.230818] type=1505 audit(1292959544.815:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2380
[   14.230866] type=1505 audit(1292959544.815:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2380
[   14.265960] type=1505 audit(1292959544.851:7): operation="profile_load" name="/usr/bin/freshclam" name2="default" pid=2385
[   14.424780] type=1505 audit(1292959545.011:8): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2389
[   14.425008] type=1505 audit(1292959545.011:9): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2389
[   14.459220] type=1505 audit(1292959545.043:10): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2393
[   19.521609] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   19.521612] Bluetooth: BNEP filters: protocol multicast
[   19.553847] Bridge firewalling registered
[   21.024714] pci 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[   21.203139] [drm] Initialized drm 1.1.0 20060810
[   21.213561] pci 0000:02:00.0: setting latency timer to 64
[   21.213759] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[   21.732803] [drm] Setting GART location based on new memory map
[   21.733339] [drm] Loading R500 Microcode
[   21.733369] [drm] Num pipes: 1
[   21.733377] [drm] writeback test succeeded in 1 usecs
[   25.414557] eth0: link down
[   25.414773] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   26.900253] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[   30.100883] PPP BSD Compression module registered
[   30.133285] PPP Deflate Compression module registered
[   31.944988] ip_tables: © 2000-2006 Netfilter Core Team
[   83.000026] Clocksource tsc unstable (delta = -129991309 ns)

[Rootlexx]

Модем в правильном режиме.
Покажите вывод последней команды после попытки подключения.

[gabix]

А что мешает поставить Mobile Partner и не заморачиваться?

[demsl]

grep -i net /var/log/daemon.log

Код:

Dec 16 19:02:44 dem-desktop NetworkManager: <info> Sleeping... Dec 16 19:02:44 dem-desktop NetworkManager: <info> (eth0): now unmanaged Dec 16 19:02:44 dem-desktop NetworkManager: <info> (eth0): device state change: 2 -> 1 Dec 16 19:02:44 dem-desktop NetworkManager: <info> (eth0): cleaning up... Dec 16 19:02:44 dem-desktop NetworkManager: <info> (eth0): taking down device. Dec 17 14:29:39 dem-desktop bluetoothd[2975]: Starting experimental netlink support Dec 17 14:29:39 dem-desktop bluetoothd[2975]: Failed to find Bluetooth netlink family Dec 17 14:29:40 dem-desktop NetworkManager: <info> starting... Dec 17 14:29:40 dem-desktop NetworkManager: <info> (eth0): new Ethernet device (driver: 'via-rhine') Dec 17 14:29:40 dem-desktop NetworkManager: <info> (eth0): exported as /org/freedesktop/Hal/devices/net_00_1e_8c_72_83_a9 Dec 17 14:29:40 dem-desktop NetworkManager: <info> (ttyS0): ignoring due to lack of mobile broadband capabilties Dec 17 14:29:40 dem-desktop NetworkManager: <info> Trying to start the supplicant... Dec 17 14:29:40 dem-desktop NetworkManager: <info> Trying to start the system settings daemon... Dec 17 14:29:41 dem-desktop nm-system-settings: SCPlugin-Ifupdown: device added (udi: /org/freedesktop/Hal/devices/net_00_1e_8c_72_83_a9, iface: eth0): not well known Dec 17 14:29:41 dem-desktop nm-system-settings: Loaded plugin ifupdown: © 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list. Dec 17 14:29:41 dem-desktop nm-system-settings: Loaded plugin keyfile: © 2007 - 2008 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. Dec 17 14:29:44 dem-desktop NetworkManager: <info> (eth0): device state change: 1 -> 2 Dec 17 14:29:44 dem-desktop NetworkManager: <info> (eth0): bringing up device. Dec 17 14:29:44 dem-desktop NetworkManager: <info> (eth0): preparing device. Dec 17 14:29:44 dem-desktop NetworkManager: <info> (eth0): deactivating device (reason: 2). Dec 17 14:29:45 dem-desktop nm-system-settings: Added default wired connection 'Auto eth0' for /org/freedesktop/Hal/devices/net_00_1e_8c_72_83_a9 Dec 17 20:14:11 dem-desktop bluetoothd[3137]: Starting experimental netlink support Dec 17 20:14:11 dem-desktop bluetoothd[3137]: Failed to find Bluetooth netlink family Dec 17 20:14:12 dem-desktop NetworkManager: <info> starting... Dec 17 20:14:12 dem-desktop NetworkManager: <info> (eth0): new Ethernet device (driver: 'via-rhine') Dec 17 20:14:12 dem-desktop NetworkManager: <info> (eth0): exported as /org/freedesktop/Hal/devices/net_00_1e_8c_72_83_a9 Dec 17 20:14:12 dem-desktop NetworkManager: <info> (ttyS0): ignoring due to lack of mobile broadband capabilties Dec 17 20:14:12 dem-desktop NetworkManager: <info> (ttyUSB3): ignoring due to lack of mobile broadband capabilties Dec 17 20:14:12 dem-desktop NetworkManager: <info> (ttyUSB2): ignoring due to lack of mobile broadband capabilties Dec 17 20:14:12 dem-desktop NetworkManager: <info> (ttyUSB1): ignoring due to lack of mobile broadband capabilties Dec 17 20:14:12 dem-desktop NetworkManager: <info> (ttyUSB0): found serial port (udev:GSM hal:) Dec 17 20:14:12 dem-desktop NetworkManager: <info> (ttyUSB0): deferring until all ports found Dec 17 20:14:12 dem-desktop NetworkManager: <info> Trying to start the supplicant... Dec 17 20:14:12 dem-desktop NetworkManager: <info> Trying to start the system settings daemon... Dec 17 20:14:13 dem-desktop nm-system-settings: SCPlugin-Ifupdown: device added (udi: /org/freedesktop/Hal/devices/net_00_1e_8c_72_83_a9, iface: eth0): not well known Dec 17 20:14:13 dem-desktop nm-system-settings: Loaded plugin ifupdown: © 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list. Dec 17 20:14:13 dem-desktop nm-system-settings: Loaded plugin keyfile: © 2007 - 2008 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. Dec 17 20:14:17 dem-desktop NetworkManager: <info> (eth0): device state change: 1 -> 2 Dec 17 20:14:17 dem-desktop NetworkManager: <info> (eth0): bringing up device. Dec 17 20:14:17 dem-desktop NetworkManager: <info> (eth0): preparing device. Dec 17 20:14:17 dem-desktop NetworkManager: <info> (eth0): deactivating device (reason: 2). Dec 17 20:14:17 dem-desktop NetworkManager: <info> Re-checking deferred serial ports Dec 17 20:14:17 dem-desktop nm-system-settings: Added default wired connection 'Auto eth0' for /org/freedesktop/Hal/devices/net_00_1e_8c_72_83_a9 Dec 17 20:14:17 dem-desktop NetworkManager: <info> (ttyUSB0): new Modem device (driver: 'option') Dec 17 20:14:17 dem-desktop NetworkManager: <info> (ttyUSB0): exported as /org/freedesktop/Hal/devices/usb_device_12d1_140c_noserial_if0_serial_usb_0 Dec 17 20:14:20 dem-desktop NetworkManager: <info> (ttyUSB0): device state change: 1 -> 2 Dec 17 20:14:21 dem-desktop NetworkManager: <info> (ttyUSB0): deactivating device (reason: 2). Dec 17 20:14:21 dem-desktop NetworkManager: nm_system_device_flush_ip4_routes_with_iface: assertion `iface_idx >= 0' failed Dec 17 20:14:21 dem-desktop NetworkManager: nm_system_device_flush_ip4_addresses_with_iface: assertion `iface_idx >= 0' failed Dec 17 20:14:21 dem-desktop NetworkManager: <info> (ttyUSB0): device state change: 2 -> 3 Dec 17 20:27:42 dem-desktop NetworkManager: <info> Activation (ttyUSB0) starting connection 'Ace&Base' Dec 17 20:27:42 dem-desktop NetworkManager: <info> (ttyUSB0): device state change: 3 -> 4 Dec 17 20:27:42 dem-desktop NetworkManager: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) scheduled... Dec 17 20:27:42 dem-desktop NetworkManager: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) started... Dec 17 20:27:42 dem-desktop NetworkManager: <debug> [1292610462.459423] nm_serial_device_open(): (ttyUSB0) opening device... Dec 17 20:27:42 dem-desktop NetworkManager: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) complete. Dec 17 20:27:42 dem-desktop NetworkManager: <info> (ttyUSB0): powering up... Dec 17 20:27:42 dem-desktop NetworkManager: <info> Registered on Home network Dec 17 20:27:42 dem-desktop NetworkManager: <info> Associated with network: +COPS: 0,2,"25503",0 Dec 17 20:27:42 dem-desktop NetworkManager: <info> Connected, Woo! Dec 17 20:27:42 dem-desktop NetworkManager: <info> Activation (ttyUSB0) Stage 2 of 5 (Device Configure) scheduled... Dec 17 20:27:42 dem-desktop NetworkManager: <info> Activation (ttyUSB0) Stage 2 of 5 (Device Configure) starting... Dec 17 20:27:42 dem-desktop NetworkManager: <info> (ttyUSB0): device state change: 4 -> 5 Dec 17 20:27:42 dem-desktop NetworkManager: <info> Starting pppd connection Dec 17 20:27:42 dem-desktop NetworkManager: <debug> [1292610462.921313] nm_ppp_manager_start(): Command line: /usr/sbin/pppd nodetach lock nodefaultroute user igprs ttyUSB0 noipdefault noauth usepeerdns lcp-echo-failure 0 lcp-echo-interval 0 ipparam /org/freedesktop/NetworkManager/PPP/0 plugin /usr/lib/pppd/2.4.4/nm-pppd-plugin.so Dec 17 20:27:42 dem-desktop NetworkManager: <debug> [1292610462.931142] nm_ppp_manager_start(): ppp started with pid 4412 Dec 17 20:27:42 dem-desktop NetworkManager: <info> Activation (ttyUSB0) Stage 2 of 5 (Device Configure) complete. Dec 17 20:27:43 dem-desktop NetworkManager: <info> (ttyUSB0): device state change: 5 -> 6 Dec 17 20:27:43 dem-desktop NetworkManager: <info> (ttyUSB0): device state change: 6 -> 7 Dec 17 20:27:44 dem-desktop NetworkManager: <info> PPP manager(IP Config Get) reply received. Dec 17 20:27:44 dem-desktop NetworkManager: <info> Activation (ttyUSB0) Stage 4 of 5 (IP Configure Get) scheduled... Dec 17 20:27:44 dem-desktop NetworkManager: <info> Activation (ttyUSB0) Stage 4 of 5 (IP Configure Get) started... Dec 17 20:27:44 dem-desktop NetworkManager: <info> Activation (ttyUSB0) Stage 5 of 5 (IP Configure Commit) scheduled... Dec 17 20:27:44 dem-desktop NetworkManager: <info> Activation (ttyUSB0) Stage 4 of 5 (IP Configure Get) complete. Dec 17 20:27:44 dem-desktop NetworkManager: <info> Activation (ttyUSB0) Stage 5 of 5 (IP Configure Commit) started... Dec 17 20:27:45 dem-desktop NetworkManager: <info> (ttyUSB0): device state change: 7 -> 8 Dec 17 20:27:45 dem-desktop NetworkManager: <info> Policy set 'Ace&Base' (ppp0) as default for routing and DNS. Dec 17 20:27:45 dem-desktop NetworkManager: <info> Activation (ttyUSB0) successful, device activated. Dec 17 20:27:45 dem-desktop NetworkManager: <info> Activation (ttyUSB0) Stage 5 of 5 (IP Configure Commit) complete. Dec 18 08:10:50 dem-desktop bluetoothd[3066]: Starting experimental netlink support Dec 18 08:10:50 dem-desktop bluetoothd[3066]: Failed to find Bluetooth netlink family Dec 18 08:10:51 dem-desktop NetworkManager: <info> starting... Dec 18 08:10:51 dem-desktop NetworkManager: <info> (eth0): new Ethernet device (driver: 'via-rhine') Dec 18 08:10:51 dem-desktop NetworkManager: <info> (eth0): exported as /org/freedesktop/Hal/devices/net_00_1e_8c_72_83_a9 Dec 18 08:10:51 dem-desktop NetworkManager: <info> (ttyS0): ignoring due to lack of mobile broadband capabilties Dec 18 08:10:51 dem-desktop NetworkManager: <info> Trying to start the supplicant... Dec 18 08:10:51 dem-desktop NetworkManager: <info> Trying to start the system settings daemon... Dec 18 08:10:52 dem-desktop nm-system-settings: SCPlugin-Ifupdown: device added (udi: /org/freedesktop/Hal/devices/net_00_1e_8c_72_83_a9, iface: eth0): not well known Dec 18 08:10:52 dem-desktop nm-system-settings: Loaded plugin ifupdown: © 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list. Dec 18 08:10:52 dem-desktop nm-system-settings: Loaded plugin keyfile: © 2007 - 2008 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. Dec 18 08:10:56 dem-desktop NetworkManager: <info> (eth0): device state change: 1 -> 2 Dec 18 08:10:56 dem-desktop NetworkManager: <info> (eth0): bringing up device. Dec 18 08:10:56 dem-desktop NetworkManager: <info> (eth0): preparing device. Dec 18 08:10:56 dem-desktop NetworkManager: <info> (eth0): deactivating device (reason: 2). Dec 18 08:10:56 dem-desktop nm-system-settings: Added default wired connection 'Auto eth0' for /org/freedesktop/Hal/devices/net_00_1e_8c_72_83_a9 Dec 18 08:19:21 dem-desktop hald: unmounted /dev/sr1 from '/media/Mobile Internet' on behalf of uid 0 Dec 18 08:21:54 dem-desktop NetworkManager: <info> Trying to start the system settings daemon... Dec 18 08:21:54 dem-desktop nm-system-settings: SCPlugin-Ifupdown: device added (udi: /org/freedesktop/Hal/devices/net_00_1e_8c_72_83_a9, iface: eth0): not well known Dec 18 08:21:54 dem-desktop nm-system-settings: Loaded plugin ifupdown: © 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list. Dec 18 08:21:54 dem-desktop nm-system-settings: Loaded plugin keyfile: © 2007 - 2008 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. Dec 18 08:21:59 dem-desktop nm-system-settings: Added default wired connection 'Auto eth0' for /org/freedesktop/Hal/devices/net_00_1e_8c_72_83_a9 Dec 18 13:00:36 dem-desktop bluetoothd[3031]: Starting experimental netlink support Dec 18 13:00:36 dem-desktop bluetoothd[3031]: Failed to find Bluetooth netlink family Dec 18 13:00:37 dem-desktop NetworkManager: <info> starting... Dec 18 13:00:37 dem-desktop NetworkManager: <info> (eth0): new Ethernet device (driver: 'via-rhine') Dec 18 13:00:37 dem-desktop NetworkManager: <info> (eth0): exported as /org/freedesktop/Hal/devices/net_00_1e_8c_72_83_a9 Dec 18 13:00:37 dem-desktop NetworkManager: <info> (ttyS0): ignoring due to lack of mobile broadband capabilties Dec 18 13:00:37 dem-desktop NetworkManager: <info> Trying to start the supplicant... Dec 18 13:00:37 dem-desktop NetworkManager: <info> Trying to start the system settings daemon... Dec 18 13:00:37 dem-desktop nm-system-settings: SCPlugin-Ifupdown: device added (udi: /org/freedesktop/Hal/devices/net_00_1e_8c_72_83_a9, iface: eth0): not well known Dec 18 13:00:37 dem-desktop nm-system-settings: Loaded plugin ifupdown: © 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list. Dec 18 13:00:37 dem-desktop nm-system-settings: Loaded plugin keyfile: © 2007 - 2008 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. Dec 18 13:00:41 dem-desktop NetworkManager: <info> (eth0): device state change: 1 -> 2 Dec 18 13:00:41 dem-desktop NetworkManager: <info> (eth0): bringing up device. Dec 18 13:00:41 dem-desktop NetworkManager: <info> (eth0): preparing device. Dec 18 13:00:41 dem-desktop NetworkManager: <info> (eth0): deactivating device (reason: 2). Dec 18 13:00:42 dem-desktop nm-system-settings: Added default wired connection 'Auto eth0' for /org/freedesktop/Hal/devices/net_00_1e_8c_72_83_a9 Dec 18 13:04:11 dem-desktop bluetoothd[3034]: Starting experimental netlink support Dec 18 13:04:11 dem-desktop bluetoothd[3034]: Failed to find Bluetooth netlink family Dec 18 13:04:12 dem-desktop NetworkManager: <info> starting... Dec 18 13:04:12 dem-desktop NetworkManager: <info> (eth0): new Ethernet device (driver: 'via-rhine') Dec 18 13:04:12 dem-desktop NetworkManager: <info> (eth0): exported as /org/freedesktop/Hal/devices/net_00_1e_8c_72_83_a9 Dec 18 13:04:12 dem-desktop NetworkManager: <info> (ttyS0): ignoring due to lack of mobile broadband capabilties Dec 18 13:04:12 dem-desktop NetworkManager: <info> Trying to start the supplicant... Dec 18 13:04:12 dem-desktop NetworkManager: <info> Trying to start the system settings daemon... Dec 18 13:04:12 dem-desktop nm-system-settings: SCPlugin-Ifupdown: device added (udi: /org/freedesktop/Hal/devices/net_00_1e_8c_72_83_a9, iface: eth0): not well known Dec 18 13:04:12 dem-desktop nm-system-settings: Loaded plugin ifupdown: © 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list. Dec 18 13:04:12 dem-desktop nm-system-settings: Loaded plugin keyfile: © 2007 - 2008 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. Dec 18 13:04:17 dem-desktop NetworkManager: <info> (eth0): device state change: 1 -> 2 Dec 18 13:04:17 dem-desktop NetworkManager: <info> (eth0): bringing up device. Dec 18 13:04:17 dem-desktop NetworkManager: <info> (eth0): preparing device. Dec 18 13:04:17 dem-desktop NetworkManager: <info> (eth0): deactivating device (reason: 2). Dec 18 13:04:17 dem-desktop nm-system-settings: Added default wired connection 'Auto eth0' for /org/freedesktop/Hal/devices/net_00_1e_8c_72_83_a9 Dec 21 21:25:50 dem-desktop bluetoothd[3085]: Starting experimental netlink support Dec 21 21:25:50 dem-desktop bluetoothd[3085]: Failed to find Bluetooth netlink family Dec 21 21:25:51 dem-desktop NetworkManager: <info> starting... Dec 21 21:25:51 dem-desktop NetworkManager: <info> (eth0): new Ethernet device (driver: 'via-rhine') Dec 21 21:25:51 dem-desktop NetworkManager: <info> (eth0): exported as /org/freedesktop/Hal/devices/net_00_1e_8c_72_83_a9 Dec 21 21:25:51 dem-desktop NetworkManager: <info> (ttyS0): ignoring due to lack of mobile broadband capabilties Dec 21 21:25:51 dem-desktop NetworkManager: <info> (ttyUSB3): ignoring due to lack of mobile broadband capabilties Dec 21 21:25:51 dem-desktop NetworkManager: <info> (ttyUSB2): ignoring due to lack of mobile broadband capabilties Dec 21 21:25:51 dem-desktop NetworkManager: <info> (ttyUSB1): ignoring due to lack of mobile broadband capabilties Dec 21 21:25:51 dem-desktop NetworkManager: <info> (ttyUSB0): found serial port (udev:GSM hal:) Dec 21 21:25:51 dem-desktop NetworkManager: <info> (ttyUSB0): deferring until all ports found Dec 21 21:25:51 dem-desktop NetworkManager: <info> Trying to start the supplicant... Dec 21 21:25:51 dem-desktop NetworkManager: <info> Trying to start the system settings daemon... Dec 21 21:25:51 dem-desktop nm-system-settings: SCPlugin-Ifupdown: device added (udi: /org/freedesktop/Hal/devices/net_00_1e_8c_72_83_a9, iface: eth0): not well known Dec 21 21:25:51 dem-desktop nm-system-settings: Loaded plugin ifupdown: © 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list. Dec 21 21:25:51 dem-desktop nm-system-settings: Loaded plugin keyfile: © 2007 - 2008 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. Dec 21 21:25:56 dem-desktop NetworkManager: <info> (eth0): device state change: 1 -> 2 Dec 21 21:25:56 dem-desktop NetworkManager: <info> (eth0): bringing up device. Dec 21 21:25:56 dem-desktop NetworkManager: <info> (eth0): preparing device. Dec 21 21:25:56 dem-desktop NetworkManager: <info> (eth0): deactivating device (reason: 2). Dec 21 21:25:56 dem-desktop NetworkManager: <info> Re-checking deferred serial ports Dec 21 21:25:56 dem-desktop nm-system-settings: Added default wired connection 'Auto eth0' for /org/freedesktop/Hal/devices/net_00_1e_8c_72_83_a9 Dec 21 21:25:56 dem-desktop NetworkManager: <info> (ttyUSB0): new Modem device (driver: 'option') Dec 21 21:25:56 dem-desktop NetworkManager: <info> (ttyUSB0): exported as /org/freedesktop/Hal/devices/usb_device_12d1_140c_noserial_if0_serial_usb_0 Dec 21 21:25:59 dem-desktop NetworkManager: <info> (ttyUSB0): device state change: 1 -> 2 Dec 21 21:26:00 dem-desktop NetworkManager: <info> (ttyUSB0): deactivating device (reason: 2). Dec 21 21:26:00 dem-desktop NetworkManager: nm_system_device_flush_ip4_routes_with_iface: assertion `iface_idx >= 0' failed Dec 21 21:26:00 dem-desktop NetworkManager: nm_system_device_flush_ip4_addresses_with_iface: assertion `iface_idx >= 0' failed Dec 21 21:26:00 dem-desktop NetworkManager: <info> (ttyUSB0): device state change: 2 -> 3 Dec 21 21:26:00 dem-desktop NetworkManager: <info> Activation (ttyUSB0) starting connection 'Ace&Base' Dec 21 21:26:00 dem-desktop NetworkManager: <info> (ttyUSB0): device state change: 3 -> 4 Dec 21 21:26:00 dem-desktop NetworkManager: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) scheduled... Dec 21 21:26:00 dem-desktop NetworkManager: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) started... Dec 21 21:26:00 dem-desktop NetworkManager: <debug> [1292959560.006872] nm_serial_device_open(): (ttyUSB0) opening device... Dec 21 21:26:00 dem-desktop NetworkManager: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) complete. Dec 21 21:26:00 dem-desktop NetworkManager: <info> (ttyUSB0): powering up... Dec 21 21:26:00 dem-desktop NetworkManager: <info> Registered on Home network Dec 21 21:26:00 dem-desktop NetworkManager: <info> Associated with network: +COPS: 0,2,"25503",0 Dec 21 21:26:00 dem-desktop NetworkManager: <info> Connected, Woo! Dec 21 21:26:00 dem-desktop NetworkManager: <info> Activation (ttyUSB0) Stage 2 of 5 (Device Configure) scheduled... Dec 21 21:26:00 dem-desktop NetworkManager: <info> Activation (ttyUSB0) Stage 2 of 5 (Device Configure) starting... Dec 21 21:26:00 dem-desktop NetworkManager: <info> (ttyUSB0): device state change: 4 -> 5 Dec 21 21:26:00 dem-desktop NetworkManager: <info> Starting pppd connection Dec 21 21:26:00 dem-desktop NetworkManager: <debug> [1292959560.465693] nm_ppp_manager_start(): Command line: /usr/sbin/pppd nodetach lock nodefaultroute user igprs ttyUSB0 noipdefault noauth usepeerdns lcp-echo-failure 0 lcp-echo-interval 0 ipparam /org/freedesktop/NetworkManager/PPP/0 plugin /usr/lib/pppd/2.4.4/nm-pppd-plugin.so Dec 21 21:26:00 dem-desktop NetworkManager: <debug> [1292959560.522369] nm_ppp_manager_start(): ppp started with pid 3535 Dec 21 21:26:00 dem-desktop NetworkManager: <info> Activation (ttyUSB0) Stage 2 of 5 (Device Configure) complete. Dec 21 21:26:00 dem-desktop NetworkManager: <info> (ttyUSB0): device state change: 5 -> 6 Dec 21 21:26:00 dem-desktop NetworkManager: <info> (ttyUSB0): device state change: 6 -> 7 Dec 21 21:26:01 dem-desktop NetworkManager: <info> PPP manager(IP Config Get) reply received. Dec 21 21:26:01 dem-desktop NetworkManager: <info> Activation (ttyUSB0) Stage 4 of 5 (IP Configure Get) scheduled... Dec 21 21:26:01 dem-desktop NetworkManager: <info> Activation (ttyUSB0) Stage 4 of 5 (IP Configure Get) started... Dec 21 21:26:01 dem-desktop NetworkManager: <info> Activation (ttyUSB0) Stage 5 of 5 (IP Configure Commit) scheduled... Dec 21 21:26:01 dem-desktop NetworkManager: <info> Activation (ttyUSB0) Stage 4 of 5 (IP Configure Get) complete. Dec 21 21:26:01 dem-desktop NetworkManager: <info> Activation (ttyUSB0) Stage 5 of 5 (IP Configure Commit) started... Dec 21 21:26:02 dem-desktop NetworkManager: <info> (ttyUSB0): device state change: 7 -> 8 Dec 21 21:26:02 dem-desktop NetworkManager: <info> Policy set 'Ace&Base' (ppp0) as default for routing and DNS. Dec 21 21:26:02 dem-desktop NetworkManager: <info> Activation (ttyUSB0) successful, device activated. Dec 21 21:26:02 dem-desktop NetworkManager: <info> Activation (ttyUSB0) Stage 5 of 5 (IP Configure Commit) complete.

[Rootlexx]

После попытки подключения выполните и приведите вывод:

Код: Выделить всё

ip addr show
ip route show

[demsl]

ip addr show

Код:

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000 link/ether 00:1e:8c:72:83:a9 brd ff:ff:ff:ff:ff:ff 3: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:62:29:09:ab:1b brd ff:ff:ff:ff:ff:ff

ip route show


поставил Mobile Partner, в первый раз после установки инет появился, потом - опять ничего(
а сама прога выглядит так:

[gabix]

Вообще не работает? А если перегрузиться без модема и воткнуть его при загруженной системе? И, кстате, JRE какое стоит? Смутно помнится, в Ubuntu есть нечто свободное-свободное, но нерабочее. Поставь натуральную сановскую оракловскую.

[Aviator]

На Debian этот модем у меня заводился с помощью usb_modeswitch, chatscripts и pppd (если нужно, то относительно универсальные конфиги могу привести, их тут много проскакивало). Без дополнительных настроек. NetworkManager ведет себя одинаково практически со всеми продаваемыми 3G-модемами: в случае, если подключение разрывается со стороны сотовой сети, повторно подключиться можно только переткнув модем/перезапустив NM/сняв и поставив галочку на "мобильные соединения" в контекстном меню значка NM.

[Rootlexx]

Почитайте: http://www.niiranen.fi/Tech-Blog/solvedubu...eie160e12d1140c.

[DjSpike]

Переключи модем в режим "Только модем" и не будет ни каких проблем.
http://wiki.unixforum.org/wiki/3G,_EDGE,GP....B5.D0.BC.D1.8B

[SalavaT]

Точно такая же ситуация. На компе винда. Ставлю Федора14 второй ОС и сразу-же появляется значёк "сетевые подключения" с широким выбором -Киевстар, МТС и
вай-фай(удивительно - откуда? До вышек МТС и КС - 800м(обе-2G), до соседской телевизионной тарелки -15) Но соединение не произошло. После перезагрузки
"с.п." больше не появлялись. Удаление в винде и подключение только к Федоре не помогло. Модем виден в папке Компьютер как HUAWEI MMC Storage, но открыть
или переместить невозможно.Через Network Manager сколько соединений не создавай(выбор есть: huawei или другое) - бесполезно.B etc/usb_modeswitch
добавлялось два варианта. etc/undev/rubes.d/45-huawei-e1550.rules создан и так-же добавлялось два варианта, из советов повторяющихся на всех сайтах.
#lsusb
bus 001 Devise 005 : ID 12d1 : 1001 H. E620 USB modem
/dev
ttyUSB0, ttyUSB1, ttyUSB2
lsmod |grep usb| sort
usbserial 27506 2 option, usb_wwan
usb_storage 35519 0
usb_wwan 8194 1option
И, уже не помню после какой команды, получил список около 40 ОК. Вот только подключиться -НЕ ОК. Какие есть предложения?
/Километровые логи не дам! Не факт, что сам не ошибусь, переписывая в листочек и набирая в Блокноте. Миником не предлагать - всё качается через винду,
потом то библиотек не хватает; то архив битый; то ещё в таком-же духе/
Баловался Слаксом через ВиртуалБокс. В нет входил просто открывая браузер. Если поставить Слакс второй ОС - всё будет так-же легко или снова прийдётся
извращаться???
Р.S.
Последней каплей стало издевательство над etc/wvdial.conf . *99# и *99***1# ; AT+CGDCONT=1/"IP"/"www..... и AT+CGDCONT,"IP","www...... -
результат один. После команды wvdial доходит до определения IP и DNS адресов и всё.

[kma21]

Попробуйте прст "переткнуть" модем. Может поможет. У меня Nokia 5700XM постоянно надо переподключать. Бывает и с модемом тоже проблема. Не подключается к сети. Его физически переподключить к порту USB и начинает работать.

[Stasroot1]

А откуда мобильный партнер?

[SalavaT]

Уже недели три перевтыкаю . Результат нулевой.
В смысле МОБИЛЬНЫЙ ПАРТНЁР ??

[nickm]

Модем виден в папке Компьютер как HUAWEI MMC Storage,

А если последовать этому совету?

Переключи модем в режим "Только модем" и не будет ни каких проблем.
http://wiki.unixforum.org/wiki/3G,_EDGE,GP....B5.D0.BC.D1.8B

(п.3)

[Stasroot1]

Уже недели три перевтыкаю . Результат нулевой.
В смысле МОБИЛЬНЫЙ ПАРТНЁР ??

Mobile Partner

[SalavaT]

Я читал уже все советы. В том числе и рекомендуемые. Для них необходимых прог нет. А всё, что закачивается - закчивается с ошибками.(с рускоязычных сайтов)
а с моим знанием английского на других - нечего делать. И ещё немного результатов:
dmesg - всё зарегистрировано и поделено на модем и флешку.
~#lspsi
bash: /root : является директорией
cd /dev/sdb
bash: cd: /dev/sdb это не каталог
/dev/modem , IP addr show , IP route show , xorg.0.log , xorg.conf -- нет такой кого файла\команда не найдена grep -i net/var/log/daemon.log -- тишина в ответ
версия Х 1.9.0
А что это такое? Bus 001 Devise 004: ID 13d3 : 5130 IMC Networks

[SalavaT]

Федору устанавливал с LiveCD. И если в момент первого запуска всё заработало, значит уже присутствовало НЕЧТО, что давало эту возможность. Соединение не произошло,
потому, что etc/wvdial.conf был пустым. Значи дело не в сторонних програмах. Нужно просто вернуть назад это НЕЧТО(скрипт, драйвер, или ещё что-то в том же духе)
По-моему копать нужно в эту сторону.

[nickm]

Это "нечто с лайв CD" - называется NetworkManager. и ничего общего с wvdial не имеет.
Чтобы пускать от обычного пользователся, надо добавить твоего юзера в группу dialout. Можно руками, можно через system-config-users, потом перелогиниться и всё должно быть путём.

[SalavaT]

Дело то в том, что самого значка "сетевые подключения" в трее нет. Кстати , сегодня загрузился с "живого", создал новое подключение, написал пользователь - igprs;пароль - none; и через 3 секунды был в сети. Отсюда 2 вопроса :1) почему не додумался до этого раньше? 2) что проще-
переустановить Федору, пока она "пустая" или переустановить сам Нетменеджер ? Если второе, подскажите какие папки куда нужно скопировать, и обязательно при этом удалить свою "самодеятельность"? Заранее спасибо!

[SalavaT]

Спасибо nickm за идею. В групу я себя добавлял. А вот, проверка всех груп и зависимостей дала интересный результат. Всё решилось на уровне интуиции и очень радикально - переустановкой Федоры. Из неё сейчас и пишу.
1) При подключении в windows поля имя и пароль должны быть пустыми. Linux на пустой пароль шибко ругается. Поменял intrrnet(по умолчанию при открытии Нетменеджера) на none - и всё получилось.
2) Фу, авторам Нетменеджера. Что за прога, что дожила до первой перезагрузки и заглючила.
3) Фу производителям SiS. Из-за отсутствия нормального драйвера дважды из спящего режима пришлось выводить кнопкой POWER, что добавило глюков системе в целом.
4) Ну и окончательно добили корявые руки юзера и незнание линукса.(что где находится ,что как должно запускаться и как это всё проверить)