/home/user# ip r
default dev enp2s0 scope link metric 1002 linkdown
169.254.0.0/16 dev enp2s0 proto kernel scope link src 169.254.5.249 linkdown
Это была таблица до включения WiFi
Ниже таблица после включения WiFi
/home/user# ip r
default via 192.168.0.1 dev wlan0 proto static metric 600
default dev enp2s0 scope link metric 1002 linkdown
169.254.0.0/16 dev enp2s0 proto kernel scope link src 169.254.5.249 linkdown
192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.106 metric 600
Вывод ifconfig
ifconfig
enp2s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 30:65:ec:b3:1c:0a txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
enp2s0:avahi: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 169.254.5.249 netmask 255.255.0.0 broadcast 169.254.255.255
ether 30:65:ec:b3:1c:0a txqueuelen 1000 (Ethernet)
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1 (Local Loopback)
RX packets 54489 bytes 4194249 (3.9 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 54489 bytes 4194249 (3.9 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=-28605<UP,BROADCAST,RUNNING,MULTICAST,DYNAMIC> mtu 1500
inet 192.168.0.106 netmask 255.255.255.0 broadcast 192.168.0.255
inet6 fe80::f689:fc0e
9f65 prefixlen 64 scopeid 0x20<link>ether 54:8c:a0:b2:7a:ff txqueuelen 1000 (Ethernet)
RX packets 70 bytes 24056 (23.4 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 63 bytes 30159 (29.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Развернуть
На маршрутизатор TP-Link могу выйти по адресу 192.168.0.1
