Slackware 13.1 (Новая версия - новые проблемы)

flank'er · Сообщение **flank'er** » 23.06.2010 16:33

через http исо можно получить например здесь
http://slackware.mirrors.tds.net/pub/slack...kware-13.1-iso/
сам я качал через торренты

bormant · Сообщение **bormant** » 23.06.2010 18:09

Или (многим бывает удобным yandex, доступен по http, ftp, rsync):
mirror.yandex.ru/slackware/slackware-13.1-iso/
mirror.yandex.ru/slackware/slackware64-13.1-iso/

sidd · Сообщение **sidd** » 23.06.2010 21:24

Спасибо, попробую еще с Яндекса.

bormant · Сообщение **bormant** » 24.06.2010 00:47

Первым делом после закачки проверьте md5 сумму образа (под Win есть fsum и др., под Linux -- в комплекте md5sum). Если не сошлась, не надо резать образ, его нужно выправить (или в совсем уж клиническом случае качать заново -- мало интерсного -- особенно, если порча скачки явление стабильное).
Если соединение неустойчивое, теряются/бьются пакеты, воспользуйтесь лучше торрентом, укажите ему уже скачанный файл в качестве назначения, он докачает только недостающие/битые куски.
Если скачиваете из под Linux, можно аналогичным образом выправить ошибки при помощи rsync (вменяемого клиента под Win не знаю).

ps. Ссылки на торренты http://slackware.com/getslack/torrents.php

ozs · Сообщение **ozs** » 30.06.2010 20:28

делал по этой статье
Отображение картинки на этапе загрузки Linux (console linux color boot patch)

А скажите пожалуйста где взять bootsplash.diff для ядра 2.6.34, а то на оф сайте только для более ранних версий

flank'er · Сообщение **flank'er** » 30.06.2010 23:10

секретов в этом деле нет. в сети можно найти пач для ядра 2.6.32. скачайте и откройте его своим любимым текстовым редактором. замените пути к файлам с 2.6.32 на 2.6.34
как то так:

flanker@slackware


bash-4.1# pwd
/usr/src
bash-4.1# wget http://dev.kakaopor.hu/stuffs/bootsplash-3.1.6a-2.6.32.diff -O -| sed 's/2.6.32/2.6.34/' > bootsplash-3.1.6a-2.6.34.diff
--2010-06-30 22:01:38--  http://dev.kakaopor.hu/stuffs/bootsplash-3.1.6a-2.6.32.diff
Распознаётся dev.kakaopor.hu (dev.kakaopor.hu)... 195.70.38.80
Устанавливается соединение с dev.kakaopor.hu (dev.kakaopor.hu)|195.70.38.80|:80... соединение установлено.
Запрос HTTP послан, ожидается ответ... 200 OK
Длина: 81563 (80K) [text/x-diff]
Saving to: «STDOUT»

100%[===============================================================================
======================>] 81 563       201K/s   в 0,4s

2010-06-30 22:01:39 (201 KB/s) - written to stdout [81563/81563]

bash-4.1# patch -p0 -i  bootsplash-3.1.6a-2.6.34.diff
patching file linux-2.6.34/drivers/char/keyboard.c
Hunk #1 succeeded at 1190 (offset 12 lines).
patching file linux-2.6.34/drivers/char/n_tty.c
Hunk #1 succeeded at 1779 (offset 1 line).
patching file linux-2.6.34/drivers/char/vt.c
Hunk #1 succeeded at 4101 (offset 38 lines).
patching file linux-2.6.34/drivers/video/console/bitblit.c
Hunk #1 succeeded at 18 (offset 1 line).
Hunk #3 succeeded at 74 (offset 1 line).
Hunk #5 succeeded at 239 (offset 1 line).
patching file linux-2.6.34/drivers/video/console/fbcon.c
patching file linux-2.6.34/drivers/video/console/fbcon.h
patching file linux-2.6.34/drivers/video/Kconfig
Hunk #1 succeeded at 2228 (offset 55 lines).
patching file linux-2.6.34/drivers/video/Makefile
patching file linux-2.6.34/drivers/video/vesafb.c
Hunk #1 succeeded at 181 (offset -1 lines).
patching file linux-2.6.34/include/linux/console_struct.h
patching file linux-2.6.34/include/linux/fb.h
Hunk #1 succeeded at 864 (offset 3 lines).
patching file linux-2.6.34/drivers/video/bootsplash/bootsplash.c
patching file linux-2.6.34/drivers/video/bootsplash/bootsplash.h
patching file linux-2.6.34/drivers/video/bootsplash/decode-jpg.c
patching file linux-2.6.34/drivers/video/bootsplash/decode-jpg.h
patching file linux-2.6.34/drivers/video/bootsplash/Kconfig
patching file linux-2.6.34/drivers/video/bootsplash/Makefile
patching file linux-2.6.34/drivers/video/bootsplash/render.c
bash-4.1#

bormant · Сообщение **bormant** » 01.07.2010 13:14

Проще -p1 написать, чем править патч:

Код: Выделить всё

# cd /tmp
# wget http://dev.kakaopor.hu/stuffs/bootsplash-3.1.6a-2.6.32.diff
# cd /usr/src/linux-2.6.34
# patch -p1 -i /tmp/bootsplash-3.1.6a-2.6.32.diff

ozs · Сообщение **ozs** » 01.07.2010 17:28

Спасибо оба варианта хороши, но есть оказывается и готовые патчи http://przemek.org/patches/

wolkolak · Сообщение **wolkolak** » 02.07.2010 21:06

Сегодня поставил 13.1.
Первая проблема: Система загружается со второго раза, т.е. как я думаю, как только слака начинает подгружать видеодрайвер, экран становиться просто черным, но видно что система продолжает работать, но ничего на монитор так и не выводиться, приходиться перезагружать и со второго раза в большинстве случаев система благополучно загружается, ну а следующий запуск опять выведет черный экран. в слаке 13.0 всё было нормально (чипсет GMA X3100)
Вторая проблема: mc почему-то запускается ровно через 1 минуту после вызова его в консоли, после русификации он показывал много фокусов и на этом он пока остановился, с задержкой запускается не только он но и startx хотя он простаивает около 15c

flank'er · Сообщение **flank'er** » 02.07.2010 21:35

wolkolak писал(а): ↑
02.07.2010 21:06
Сегодня поставил 13.1.
Первая проблема: Система загружается со второго раза, т.е. как я думаю, как только слака начинает подгружать видеодрайвер, экран становиться просто черным, но видно что система продолжает работать, но ничего на монитор так и не выводиться, приходиться перезагружать и со второго раза в большинстве случаев система благополучно загружается, ну а следующий запуск опять выведет черный экран. в слаке 13.0 всё было нормально (чипсет GMA X3100)
Вторая проблема: mc почему-то запускается ровно через 1 минуту после вызова его в консоли, после русификации он показывал много фокусов и на этом он пока остановился, с задержкой запускается не только он но и startx хотя он простаивает около 15c

хотелось бы увидеть вывод dmesg

gramozeka · Сообщение **gramozeka** » 02.07.2010 23:21

wolkolak писал(а): ↑
02.07.2010 21:06
Сегодня поставил 13.1.
Первая проблема: Система загружается со второго раза, т.е. как я думаю, как только слака начинает подгружать видеодрайвер, экран становиться просто черным, но видно что система продолжает работать, но ничего на монитор так и не выводиться, приходиться перезагружать и со второго раза в большинстве случаев система благополучно загружается, ну а следующий запуск опять выведет черный экран. в слаке 13.0 всё было нормально (чипсет GMA X3100)

модуль nouveau нужно добавить в blacklist , можно прямо в загрузчике или в /etc//etc/modprobe.d/blacklist.conf

Archangel · Сообщение **Archangel** » 03.07.2010 16:40

gramozeka писал(а): ↑
02.07.2010 23:21
модуль nouveau нужно добавить в blacklist , можно прямо в загрузчике или в /etc//etc/modprobe.d/blacklist.conf

Насколько я помню, Патрик nouveau убрал перед релизом 13.1.
У меня были пляски с загрузкой со второго раза, когда стояло две системы, Слака и ХРюша, а в биосе включен был AHCI. Но там все косяки ХРюши, она не понимала AHCI.

Tue Apr 27 22:37:30 UTC 2010
...
x/xf86-video-nouveau-blacklist-noarch-1.txz: Added.
This is NOT the nouveau driver! It installs a file in /etc/modprobe.d/
to prevent the kernel module from autoloading. We don't want the nouveau
loaded since we do not ship the nouveau driver (yet), and having the
module loaded prevents the nv and binary nVidia drivers from working.
...

gramozeka · Сообщение **gramozeka** » 03.07.2010 18:55

Archangel писал(а): ↑
03.07.2010 16:40
gramozeka писал(а): ↑
02.07.2010 23:21
модуль nouveau нужно добавить в blacklist , можно прямо в загрузчике или в /etc//etc/modprobe.d/blacklist.conf

Насколько я помню, Патрик nouveau убрал перед релизом 13.1.
У меня были пляски с загрузкой со второго раза, когда стояло две системы, Слака и ХРюша, а в биосе включен был EHCI. Но там все косяки ХРюши, она не понимала EHCI.

Tue Apr 27 22:37:30 UTC 2010
...
x/xf86-video-nouveau-blacklist-noarch-1.txz: Added.
This is NOT the nouveau driver! It installs a file in /etc/modprobe.d/
to prevent the kernel module from autoloading. We don't want the nouveau
loaded since we do not ship the nouveau driver (yet), and having the
module loaded prevents the nv and binary nVidia drivers from working.
...

м-да , не углядел , я то обновлялся с 13.0 в течении всего времени пока 13.1 строили и в один прекрасный момент словил черный экран . Долго разбирался пока понял в чем дело ( стоит все-таки проверить блэклист мало ли ... )

wolkolak · Сообщение **wolkolak** » 03.07.2010 21:16

Действительно, у меня сейчас две системы слака и семерка, а nouveau вообще не причем у меня видюха intel

вывод dmesg

Код: Выделить всё

tion support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000373fe:0007f66b)
Memory: 2054268k/2087340k available (9560k kernel code, 31620k reserved, 3111k data, 636k init, 1182060k highmem)
virtual kernel memory layout:
    fixmap  : 0xffd57000 - 0xfffff000   (2720 kB)
    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
    vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
      .init : 0xc1c61000 - 0xc1d00000   ( 636 kB)
      .data : 0xc19561c0 - 0xc1c60004   (3111 kB)
      .text : 0xc1000000 - 0xc19561c0   (9560 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:1280
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1862.326 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.65 BogoMIPS (lpj=1862326)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
Performance Events: Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
Checking 'hlt' instruction... OK.
ACPI: Core revision 20091214
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 33446 entries in 66 pages
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) Dual  CPU  T2390  @ 1.86GHz stepping 0d
Booting Node   0, Processors  #1 Ok.
Initializing CPU#1
CPU1: Thermal monitoring handled by SMI
Brought up 2 CPUs
Total of 2 processors activated (7448.92 BogoMIPS).
devtmpfs: initialized
xor: automatically using best checksumming function: pIII_sse
   pIII_sse  :  6896.000 MB/sec
xor: using function: pIII_sse (6896.000 MB/sec)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: EC: GPE storm detected, transactions will use polling mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: Power Resource [FN00] (on)
ACPI: No dock devices found.
ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20091214/nspredef-351)
\_SB_.PCI0:_OSC evaluation returned wrong type
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
pci 0000:00:02.0: reg 10: [mem 0x93100000-0x931fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io  0x6110-0x6117]
pci 0000:00:02.1: reg 10: [mem 0x93200000-0x932fffff 64bit]
pci 0000:00:1a.0: reg 20: [io  0x60c0-0x60df]
pci 0000:00:1a.1: reg 20: [io  0x60a0-0x60bf]
pci 0000:00:1a.7: reg 10: [mem 0x96404c00-0x96404fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0x96400000-0x96403fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20: [io  0x6080-0x609f]
pci 0000:00:1d.1: reg 20: [io  0x6060-0x607f]
pci 0000:00:1d.2: reg 20: [io  0x6040-0x605f]
pci 0000:00:1d.7: reg 10: [mem 0x96404800-0x96404bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
pci 0000:00:1f.1: reg 10: [io  0x6108-0x610f]
pci 0000:00:1f.1: reg 14: [io  0x6124-0x6127]
pci 0000:00:1f.1: reg 18: [io  0x6100-0x6107]
pci 0000:00:1f.1: reg 1c: [io  0x6120-0x6123]
pci 0000:00:1f.1: reg 20: [io  0x60e0-0x60ef]
pci 0000:00:1f.2: reg 10: [io  0x60f8-0x60ff]
pci 0000:00:1f.2: reg 14: [io  0x611c-0x611f]
pci 0000:00:1f.2: reg 18: [io  0x60f0-0x60f7]
pci 0000:00:1f.2: reg 1c: [io  0x6118-0x611b]
pci 0000:00:1f.2: reg 20: [io  0x6020-0x603f]
pci 0000:00:1f.2: reg 24: [mem 0x96404000-0x964047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0x96405000-0x964050ff]
pci 0000:00:1f.3: reg 20: [io  0x6000-0x601f]
pci 0000:02:00.0: reg 10: [io  0x4000-0x40ff]
pci 0000:02:00.0: reg 18: [mem 0x90010000-0x90010fff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0x90000000-0x9000ffff 64bit pref]
pci 0000:02:00.0: unsupported PM cap regs version (7)
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0x4000-0x5fff]
pci 0000:00:1c.0:   bridge window [mem 0x95400000-0x963fffff]
pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x910fffff 64bit pref]
pci 0000:03:00.0: reg 10: [mem 0x94300000-0x94300fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.1:   bridge window [mem 0x94300000-0x953fffff]
pci 0000:00:1c.1:   bridge window [mem 0x91100000-0x920fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 08-09]
pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.4:   bridge window [mem 0x93300000-0x942fffff]
pci 0000:00:1c.4:   bridge window [mem 0x92100000-0x930fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20091214/nspredef-351)
\_SB_.PCI0:_OSC evaluation returned wrong type
_OSC request data:1 19 1f
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int32x1    722 MB/s
raid6: int32x2    656 MB/s
raid6: int32x4    550 MB/s
raid6: int32x8    457 MB/s
raid6: mmxx1     2351 MB/s
raid6: mmxx2     2738 MB/s
raid6: sse1x1    1488 MB/s
raid6: sse1x2    1953 MB/s
raid6: sse2x1    2824 MB/s
raid6: sse2x2    3132 MB/s
raid6: using algorithm sse2x2 (3132 MB/s)
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io  0x164e-0x164f] has been reserved
system 00:01: [io  0x0800-0x080f] has been reserved
system 00:01: [io  0x0400-0x047f] has been reserved
system 00:01: [io  0x0500-0x053f] has been reserved
system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0x4000-0x5fff]
pci 0000:00:1c.0:   bridge window [mem 0x95400000-0x963fffff]
pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x910fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.1:   bridge window [mem 0x94300000-0x953fffff]
pci 0000:00:1c.1:   bridge window [mem 0x91100000-0x920fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 08-09]
pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.4:   bridge window [mem 0x93300000-0x942fffff]
pci 0000:00:1c.4:   bridge window [mem 0x92100000-0x930fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 06-06]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem disabled]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:02: resource 0 [io  0x4000-0x5fff]
pci_bus 0000:02: resource 1 [mem 0x95400000-0x963fffff]
pci_bus 0000:02: resource 2 [mem 0x90000000-0x910fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0x94300000-0x953fffff]
pci_bus 0000:03: resource 2 [mem 0x91100000-0x920fffff 64bit pref]
pci_bus 0000:08: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:08: resource 1 [mem 0x93300000-0x942fffff]
pci_bus 0000:08: resource 2 [mem 0x92100000-0x930fffff 64bit pref]
pci_bus 0000:06: resource 3 [io  0x0000-0xffff]
pci_bus 0000:06: resource 4 [mem 0x00000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
Simple Boot Flag at 0x44 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1278142446.479:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
DLM (built May 12 2010 22:42:00) installed
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.29 [Flags: R/W].
ROMFS MTD (C) 2007 Red Hat, Inc.
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.5.0
ocfs2: Registered cluster interface o2cb
ocfs2: Registered cluster interface user
OCFS2 Node Manager 1.5.0
OCFS2 DLM 1.5.0
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
Btrfs loaded
Slow work thread pool: Starting up
Slow work thread pool: Ready
GFS2 (built May 12 2010 22:42:42) installed
msgmni has been set to 1705
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for fcrypt (fcrypt-generic)
alg: No test for stdrng (krng)
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0x80000000, mapped to 0xf8180000, using 1536k, total 7616k
vesafb: mode is 1024x768x8, linelength=1024, pages=8
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
input: Macintosh mouse button emulation as /devices/virtual/input/input0
Loading iSCSI transport class v2.0-870.
fnic: Cisco FCoE HBA Driver, ver 1.0.0.1121
Adaptec aacraid driver 1.1-5[24702]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
QLogic Fibre Channel HBA Driver: 8.03.01-k10
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.3.7
Copyright(c) 2004-2009 Emulex.  All rights reserved.
Brocade BFA FC/FCOE SCSI driver - version: 2.0.0.0
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
       with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.12-rc1 Thu Sep. 17 11:41:51 PST 2009
mpt2sas version 03.100.03.00 loaded
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.013.
LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
ipr: IBM Power RAID SCSI Device Driver version: 2.4.3 (June 10, 2009)
RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
stex: Promise SuperTrak EX Driver version: 4.6.0000.4
st: Version 20081215, fixed bufsize 32768, s/g segs 256
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
ata1: SATA max UDMA/133 abar m2048@0x96404000 port 0x96404100 irq 27
ata2: SATA max UDMA/133 abar m2048@0x96404000 port 0x96404180 irq 27
ata3: DUMMY
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi5 : ata_piix
scsi6 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x60e0 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60e8 irq 15
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.13
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.13
Fusion MPT FC Host driver 3.04.13
Fusion MPT SAS Host driver 3.04.13
Fusion MPT misc device (ioctl) driver 3.04.13
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Fusion MPT LAN driver 3.04.13
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0x96404c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.33.4-smp ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0x96404800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.33.4-smp ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
driver isp1362-hcd, 2005-04-04
ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T40N, JT03, max UDMA/33
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x000060c0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
ata4.00: configured for UDMA/33
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.33.4-smp uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x000060a0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.33.4-smp uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00006080
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.33.4-smp uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006060
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.33.4-smp uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.33.4-smp uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
usb 1-2: new high speed USB device using ehci_hcd and address 2
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
ata1.00: ATA-8: TOSHIBA MK2552GSX, LV010M, max UDMA/100
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA MK2552GS LV01 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
usb 1-2: New USB device found, idVendor=04f2, idProduct=b070
usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-2: Product: CNF7051
usb 1-2: Manufacturer: Chicony Electronics Co., Ltd.
usb 1-2: SerialNumber: SN0001
hub 6-0:1.0: over-current change on port 2
 sda1 sda2 sda3 sda4
sd 2:0:0:0: [sda] Attached SCSI disk
hub 7-0:1.0: over-current change on port 1
ata2: SATA link down (SStatus 0 SControl 300)
scsi 5:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T40N  JT03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
registered taskstats version 1
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT4-fs (sda1): mounted filesystem with ordered data mode
VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
devtmpfs: mounted
Freeing unused kernel memory: 636k freed
Write protecting the kernel text: 9564k
Write protecting the kernel read-only data: 2448k
udev: starting version 153
cfg80211: Using static regulatory domain info
sd 2:0:0:0: Attached scsi generic sg0 type 0
sr 5:0:0:0: Attached scsi generic sg1 type 5
cfg80211: Regulatory domain: 00
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
    (2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
    (2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
    (5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Calling CRDA to update world regulatory domain
ACPI: Battery Slot [BAT0] (battery present)
Linux agpgart interface v0.103
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ACPI: AC Adapter [ADP0] (on-line)
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: irq 28 for MSI/MSI-X
eth0: RTL8102e at 0xf8564000, 00:1e:33:49:c6:16, XID 14a00000 IRQ 28
Linux video capture interface: v2.00
agpgart-intel 0000:00:00.0: Intel 965GM Chipset
agpgart-intel 0000:00:00.0: detected 7676K stolen memory
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
uvcvideo: Found UVC 1.00 device CNF7051 (04f2:b070)
input: CNF7051 as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input5
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 2.6.33.4-smp-ks
iwl3945: Copyright(c) 2003-2009 Intel Corporation
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 29 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
ACPI: SSDT 7f6bc910 00274 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 7f674610 005B3 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: SSDT 7f676d10 000C4 (v01  PmRef  Cpu1Ist 00003000 INTL 20051117)
ACPI: SSDT 7f676c10 00083 (v01  PmRef  Cpu1Cst 00003000 INTL 20051117)
Switching to clocksource hpet
iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (65 C)
iwl3945 0000:03:00.0: setting latency timer to 64
ACPI: Fan [FAN] (on)
iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:03:00.0: irq 30 for MSI/MSI-X
phy0: Selected rate control algorithm 'iwl-3945-rs'
[drm] Initialized drm 1.1.0 20060810
cfg80211: World regulatory domain updated:
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
hda_codec: ALC268: BIOS auto-probing.
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 31 for MSI/MSI-X
[drm] set up 7M of stolen space
[drm] initialized overlay support
Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04711/0xa04000
synaptics: Toshiba Satellite L300 detected, limiting rate to 40pps.
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
Console: switching to colour frame buffer device 160x50
fb0: inteldrmfb frame buffer device
registered panic notifier
acpi device:19: registered as cooling_device3
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Adding 2096472k swap on /dev/sda2.  Priority:-1 extents:1 across:2096472k
fuse init (API version 7.13)
ppdev: user-space parallel port driver
lp: driver loaded but no devices found
powernow: This module only works with AMD K7 CPUs
cpufreq-nforce2: No nForce2 chipset.
EXT4-fs (sda3): mounted filesystem with ordered data mode
r8169: eth0: link down
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready

В иксах кстати mc и другие программы нормально запускаются, без задержки.

gramozeka · Сообщение **gramozeka** » 03.07.2010 23:13

Код: Выделить всё

fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
........
fb0: inteldrmfb frame buffer device
registered panic notifier
........

проблема с вашей видюхой сдесь видимо (пусть меня поправят знающие) нашёл несколько решений в гугле , но помогут ли они вам ? ТыЦ и ТыЦ

flank'er · Сообщение **flank'er** » 03.07.2010 23:36

выставите параметр

Код: Выделить всё

vga=normal

в lilo.conf

Kakikuk · Сообщение **Kakikuk** » 04.07.2010 15:30

Сорь, что сюда. Но не охота много тем городить. Подскажите плиз нормальный микшер звука для слаки с поддержкой горячих клавиш. А то kmix слишком много памяти жрёт.

Сообщение **zenwolf** » 04.07.2010 18:22

Kakikuk писал(а): ↑
04.07.2010 15:30
Сорь, что сюда. Но не охота много тем городить. Подскажите плиз нормальный микшер звука для слаки с поддержкой горячих клавиш. А то kmix слишком много памяти жрёт.

самый нормальный это alsamixer консольный

Kakikuk · Сообщение **Kakikuk** » 04.07.2010 18:48

zenwolf писал(а): ↑
04.07.2010 18:22
Kakikuk писал(а): ↑
04.07.2010 15:30
Сорь, что сюда. Но не охота много тем городить. Подскажите плиз нормальный микшер звука для слаки с поддержкой горячих клавиш. А то kmix слишком много памяти жрёт.

самый нормальный это alsamixer консольный

А под иксами?)

Archangel · Сообщение **Archangel** » 04.07.2010 23:16

Или я чего-то не понимаю, или вот ваша проблема:

Код: Выделить всё

fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
Console: switching to colour frame buffer device 160x50
fb0: inteldrmfb frame buffer device
registered panic notifier

Пропишите в ручную в lilo.conf разрешение и параметры консоли. А то сама она у вас никак не определиться.
Извиняюсь, проглядел, что все уже и так расписали. Кстати там похоже еще и ACPI с рэйдами не совсем нормально работает.

Сообщение **zenwolf** » 05.07.2010 05:52

Kakikuk писал(а): ↑
04.07.2010 18:48
zenwolf писал(а): ↑
04.07.2010 18:22
Kakikuk писал(а): ↑
04.07.2010 15:30
Сорь, что сюда. Но не охота много тем городить. Подскажите плиз нормальный микшер звука для слаки с поддержкой горячих клавиш. А то kmix слишком много памяти жрёт.

самый нормальный это alsamixer консольный

А под иксами?)

гуй-оболочку ставь (gtk,qt ит.д)ю и всё

Kakikuk · Сообщение **Kakikuk** » 05.07.2010 18:13

zenwolf писал(а): ↑
05.07.2010 05:52
Kakikuk писал(а): ↑
04.07.2010 18:48
zenwolf писал(а): ↑
04.07.2010 18:22
Kakikuk писал(а): ↑
04.07.2010 15:30
Сорь, что сюда. Но не охота много тем городить. Подскажите плиз нормальный микшер звука для слаки с поддержкой горячих клавиш. А то kmix слишком много памяти жрёт.

самый нормальный это alsamixer консольный

А под иксами?)

гуй-оболочку ставь (gtk,qt ит.д)ю и всё

Ну дык я и прошу совета))) Мне нужно, чтобы жрала не так много памяти, как kmix, и чтобы поддерживала горячие клавиши. Ну и чтоб в трей вешалась в LXDE.

flank'er · Сообщение **flank'er** » 05.07.2010 18:39

поставьте pulse-audio, там микшер на GTK интерфейсе.

wolkolak · Сообщение **wolkolak** » 05.07.2010 20:34

Изменение lilo непомогло, сейчас переустановил, программы стали без задержки запускаться, а проблема с загрузкой так и осталась.

flank'er · Сообщение **flank'er** » 05.07.2010 21:22

после изменений команду lilo набирали?

Archangel · Сообщение **Archangel** » 05.07.2010 21:31

Код: Выделить всё

fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver

Конфликтуют inteldrmfb и VESA, попробуйте что-то одно удалить.

wolkolak · Сообщение **wolkolak** » 06.07.2010 07:42

Archangel писал(а): ↑
05.07.2010 21:31
Код: Выделить всё
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Конфликтуют inteldrmfb и VESA, попробуйте что-то одно удалить.

Сейчас уже ничего не конфликтует, остался inteldrmfb, новый dmesg

Код: Выделить всё

Kernel command line: BOOT_IMAGE=Linux ro root=801 vt.default_utf8=1
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000373fe:0007f66b)
Memory: 2054268k/2087340k available (9560k kernel code, 31620k reserved, 3111k data, 636k init, 1182060k highmem)
virtual kernel memory layout:
    fixmap  : 0xffd57000 - 0xfffff000   (2720 kB)
    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
    vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
      .init : 0xc1c61000 - 0xc1d00000   ( 636 kB)
      .data : 0xc19561c0 - 0xc1c60004   (3111 kB)
      .text : 0xc1000000 - 0xc19561c0   (9560 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:1280
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1862.096 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.19 BogoMIPS (lpj=1862096)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
Performance Events: Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
Checking 'hlt' instruction... OK.
ACPI: Core revision 20091214
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 33446 entries in 66 pages
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) Dual  CPU  T2390  @ 1.86GHz stepping 0d
Booting Node   0, Processors  #1 Ok.
Initializing CPU#1
CPU1: Thermal monitoring handled by SMI
Brought up 2 CPUs
Total of 2 processors activated (7448.46 BogoMIPS).
devtmpfs: initialized
xor: automatically using best checksumming function: pIII_sse
   pIII_sse  :  6896.000 MB/sec
xor: using function: pIII_sse (6896.000 MB/sec)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: EC: GPE storm detected, transactions will use polling mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: Power Resource [FN00] (on)
ACPI: No dock devices found.
ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20091214/nspredef-351)
\_SB_.PCI0:_OSC evaluation returned wrong type
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
pci 0000:00:02.0: reg 10: [mem 0x93100000-0x931fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io  0x6110-0x6117]
pci 0000:00:02.1: reg 10: [mem 0x93200000-0x932fffff 64bit]
pci 0000:00:1a.0: reg 20: [io  0x60c0-0x60df]
pci 0000:00:1a.1: reg 20: [io  0x60a0-0x60bf]
pci 0000:00:1a.7: reg 10: [mem 0x96404c00-0x96404fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0x96400000-0x96403fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20: [io  0x6080-0x609f]
pci 0000:00:1d.1: reg 20: [io  0x6060-0x607f]
pci 0000:00:1d.2: reg 20: [io  0x6040-0x605f]
pci 0000:00:1d.7: reg 10: [mem 0x96404800-0x96404bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
pci 0000:00:1f.1: reg 10: [io  0x6108-0x610f]
pci 0000:00:1f.1: reg 14: [io  0x6124-0x6127]
pci 0000:00:1f.1: reg 18: [io  0x6100-0x6107]
pci 0000:00:1f.1: reg 1c: [io  0x6120-0x6123]
pci 0000:00:1f.1: reg 20: [io  0x60e0-0x60ef]
pci 0000:00:1f.2: reg 10: [io  0x60f8-0x60ff]
pci 0000:00:1f.2: reg 14: [io  0x611c-0x611f]
pci 0000:00:1f.2: reg 18: [io  0x60f0-0x60f7]
pci 0000:00:1f.2: reg 1c: [io  0x6118-0x611b]
pci 0000:00:1f.2: reg 20: [io  0x6020-0x603f]
pci 0000:00:1f.2: reg 24: [mem 0x96404000-0x964047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0x96405000-0x964050ff]
pci 0000:00:1f.3: reg 20: [io  0x6000-0x601f]
pci 0000:02:00.0: reg 10: [io  0x4000-0x40ff]
pci 0000:02:00.0: reg 18: [mem 0x90010000-0x90010fff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0x90000000-0x9000ffff 64bit pref]
pci 0000:02:00.0: unsupported PM cap regs version (7)
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0x4000-0x5fff]
pci 0000:00:1c.0:   bridge window [mem 0x95400000-0x963fffff]
pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x910fffff 64bit pref]
pci 0000:03:00.0: reg 10: [mem 0x94300000-0x94300fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.1:   bridge window [mem 0x94300000-0x953fffff]
pci 0000:00:1c.1:   bridge window [mem 0x91100000-0x920fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 08-09]
pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.4:   bridge window [mem 0x93300000-0x942fffff]
pci 0000:00:1c.4:   bridge window [mem 0x92100000-0x930fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20091214/nspredef-351)
\_SB_.PCI0:_OSC evaluation returned wrong type
_OSC request data:1 19 1f
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int32x1    722 MB/s
raid6: int32x2    652 MB/s
raid6: int32x4    550 MB/s
raid6: int32x8    457 MB/s
raid6: mmxx1     2351 MB/s
raid6: mmxx2     2734 MB/s
raid6: sse1x1    1488 MB/s
raid6: sse1x2    1953 MB/s
raid6: sse2x1    2828 MB/s
raid6: sse2x2    3140 MB/s
raid6: using algorithm sse2x2 (3140 MB/s)
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io  0x164e-0x164f] has been reserved
system 00:01: [io  0x0800-0x080f] has been reserved
system 00:01: [io  0x0400-0x047f] has been reserved
system 00:01: [io  0x0500-0x053f] has been reserved
system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0x4000-0x5fff]
pci 0000:00:1c.0:   bridge window [mem 0x95400000-0x963fffff]
pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x910fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.1:   bridge window [mem 0x94300000-0x953fffff]
pci 0000:00:1c.1:   bridge window [mem 0x91100000-0x920fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 08-09]
pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.4:   bridge window [mem 0x93300000-0x942fffff]
pci 0000:00:1c.4:   bridge window [mem 0x92100000-0x930fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 06-06]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem disabled]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:02: resource 0 [io  0x4000-0x5fff]
pci_bus 0000:02: resource 1 [mem 0x95400000-0x963fffff]
pci_bus 0000:02: resource 2 [mem 0x90000000-0x910fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0x94300000-0x953fffff]
pci_bus 0000:03: resource 2 [mem 0x91100000-0x920fffff 64bit pref]
pci_bus 0000:08: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:08: resource 1 [mem 0x93300000-0x942fffff]
pci_bus 0000:08: resource 2 [mem 0x92100000-0x930fffff 64bit pref]
pci_bus 0000:06: resource 3 [io  0x0000-0xffff]
pci_bus 0000:06: resource 4 [mem 0x00000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
Simple Boot Flag at 0x44 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1278400739.497:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
DLM (built May 12 2010 22:42:00) installed
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.29 [Flags: R/W].
ROMFS MTD (C) 2007 Red Hat, Inc.
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.5.0
ocfs2: Registered cluster interface o2cb
ocfs2: Registered cluster interface user
OCFS2 Node Manager 1.5.0
OCFS2 DLM 1.5.0
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
Btrfs loaded
Slow work thread pool: Starting up
Slow work thread pool: Ready
GFS2 (built May 12 2010 22:42:42) installed
msgmni has been set to 1705
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for fcrypt (fcrypt-generic)
alg: No test for stdrng (krng)
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug &amp;amp; Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
input: Macintosh mouse button emulation as /devices/virtual/input/input0
Loading iSCSI transport class v2.0-870.
fnic: Cisco FCoE HBA Driver, ver 1.0.0.1121
Adaptec aacraid driver 1.1-5[24702]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
QLogic Fibre Channel HBA Driver: 8.03.01-k10
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.3.7
Copyright(c) 2004-2009 Emulex.  All rights reserved.
Brocade BFA FC/FCOE SCSI driver - version: 2.0.0.0
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
       with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.12-rc1 Thu Sep. 17 11:41:51 PST 2009
mpt2sas version 03.100.03.00 loaded
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.013.
LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
ipr: IBM Power RAID SCSI Device Driver version: 2.4.3 (June 10, 2009)
RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
stex: Promise SuperTrak EX Driver version: 4.6.0000.4
st: Version 20081215, fixed bufsize 32768, s/g segs 256
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
ata1: SATA max UDMA/133 abar m2048@0x96404000 port 0x96404100 irq 27
ata2: SATA max UDMA/133 abar m2048@0x96404000 port 0x96404180 irq 27
ata3: DUMMY
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi5 : ata_piix
scsi6 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x60e0 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60e8 irq 15
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.13
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.13
Fusion MPT FC Host driver 3.04.13
Fusion MPT SAS Host driver 3.04.13
Fusion MPT misc device (ioctl) driver 3.04.13
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Fusion MPT LAN driver 3.04.13
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0x96404c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.33.4-smp ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0x96404800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.33.4-smp ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
driver isp1362-hcd, 2005-04-04
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x000060c0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.33.4-smp uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x000060a0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.33.4-smp uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00006080
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.33.4-smp uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006060
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.33.4-smp uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.33.4-smp uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
hub 6-0:1.0: over-current change on port 2
ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T40N, JT03, max UDMA/33
ata4.00: configured for UDMA/33
hub 7-0:1.0: over-current change on port 1
usb 1-2: new high speed USB device using ehci_hcd and address 2
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: TOSHIBA MK2552GSX, LV010M, max UDMA/100
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA MK2552GS LV01 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
usb 1-2: New USB device found, idVendor=04f2, idProduct=b070
usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-2: Product: CNF7051
usb 1-2: Manufacturer: Chicony Electronics Co., Ltd.
usb 1-2: SerialNumber: SN0001
sd 2:0:0:0: [sda] Attached SCSI disk
ata2: SATA link down (SStatus 0 SControl 300)
scsi 5:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T40N  JT03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
registered taskstats version 1
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda1): mounted filesystem with ordered data mode
VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
devtmpfs: mounted
Freeing unused kernel memory: 636k freed
Write protecting the kernel text: 9564k
Write protecting the kernel read-only data: 2448k
udev: starting version 153
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
ACPI: AC Adapter [ADP0] (off-line)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
sd 2:0:0:0: Attached scsi generic sg0 type 0
sr 5:0:0:0: Attached scsi generic sg1 type 5
ACPI: Battery Slot [BAT0] (battery present)
Linux agpgart interface v0.103
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
agpgart-intel 0000:00:00.0: Intel 965GM Chipset
agpgart-intel 0000:00:00.0: detected 7676K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: 00
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
    (2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
    (2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
    (5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Calling CRDA to update world regulatory domain
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: irq 28 for MSI/MSI-X
eth0: RTL8102e at 0xf8182000, 00:1e:33:49:c6:16, XID 14a00000 IRQ 28
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (44 C)
Linux video capture interface: v2.00
ACPI: SSDT 7f6bc910 00274 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 7f674610 005B3 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: SSDT 7f676d10 000C4 (v01  PmRef  Cpu1Ist 00003000 INTL 20051117)
ACPI: SSDT 7f676c10 00083 (v01  PmRef  Cpu1Cst 00003000 INTL 20051117)
Switching to clocksource hpet
ACPI: Fan [FAN] (on)
uvcvideo: Found UVC 1.00 device CNF7051 (04f2:b070)
input: CNF7051 as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input5
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 29 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
[drm] Initialized drm 1.1.0 20060810
hda_codec: ALC268: BIOS auto-probing.
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 2.6.33.4-smp-ks
iwl3945: Copyright(c) 2003-2009 Intel Corporation
iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwl3945 0000:03:00.0: setting latency timer to 64
iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:03:00.0: irq 30 for MSI/MSI-X
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 31 for MSI/MSI-X
[drm] set up 7M of stolen space
cfg80211: World regulatory domain updated:
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[drm] initialized overlay support
phy0: Selected rate control algorithm 'iwl-3945-rs'
Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04711/0xa04000
synaptics: Toshiba Satellite L300 detected, limiting rate to 40pps.
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
Console: switching to colour frame buffer device 160x50
fb0: inteldrmfb frame buffer device
registered panic notifier
acpi device:19: registered as cooling_device3
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Adding 2096472k swap on /dev/sda2.  Priority:-1 extents:1 across:2096472k
fuse init (API version 7.13)
ppdev: user-space parallel port driver
lp: driver loaded but no devices found
powernow: This module only works with AMD K7 CPUs
cpufreq-nforce2: No nForce2 chipset.
EXT4-fs (sda3): mounted filesystem with ordered data mode
NET: Registered protocol family 10
lo: Disabled Privacy Extensions

Проблема как я понял в этом

Код: Выделить всё

Console: switching to colour frame buffer device 160x50
fb0: inteldrmfb frame buffer device
registered panic notifier

Система сначала нормально загружается потом всё пропадает - черный экран, жду когда система загрузиться вслепую ввожу пользователя и пароль и startx и нормально Иксы работают
в lilo vga=normal, где бы еще покрутить???

flank'er · Сообщение **flank'er** » 06.07.2010 12:36

выставите четвертый уровень инициализации

Archangel · Сообщение **Archangel** » 06.07.2010 12:57

А может ну его этот inteldrmfb, и на VESA попробовать?

wolkolak · Сообщение **wolkolak** » 06.07.2010 17:32

Archangel писал(а): ↑
06.07.2010 12:57
А может ну его этот inteldrmfb, и на VESA попробовать?

Аналогично, самое интересное что иногда нормально грузиться а иногда нет.
И я думаю что дело в KMS, не???

unixforum.org

Slackware 13.1 (Новая версия - новые проблемы)

Re: Slackware 13.1

Re: Slackware 13.1

Re: Slackware 13.1

Re: Slackware 13.1

Re: Slackware 13.1

Re: Slackware 13.1

Re: Slackware 13.1

Re: Slackware 13.1

Re: Slackware 13.1

Re: Slackware 13.1

Re: Slackware 13.1

Re: Slackware 13.1

Re: Slackware 13.1

Re: Slackware 13.1

Re: Slackware 13.1

Re: Slackware 13.1

Re: Slackware 13.1

Re: Slackware 13.1

Re: Slackware 13.1

Re: Slackware 13.1

Re: Slackware 13.1

Re: Slackware 13.1

Re: Slackware 13.1

Re: Slackware 13.1

Re: Slackware 13.1

Re: Slackware 13.1

Re: Slackware 13.1

Re: Slackware 13.1

Re: Slackware 13.1

Re: Slackware 13.1