Compiz в Mandriva 2008

PCLinuxOS

Модератор: Bizdelnick

iskan1188
Сообщения: 9

Re: Compiz в Mandriva 2008

Сообщение iskan1188 »

Sleeping Daemon писал(а):
12.02.2008 07:28
iskan1188 писал(а):
12.02.2008 03:12
landrew.xp писал(а):
10.02.2008 10:30
iskan1188 писал(а):
10.02.2008 03:49
а в xorg.conf ничего не прописивал. там что надо что то прописат? я не знал. подскажите плз что прописат. можэт поетому тормозит?

Может и поэтому.
Приведи его тут в тегах codebox.

а как ето сделат? если можно напишите по подробнеы прошу.а

В /etc/X11/xorg.conf
есть такое?
Section "Extensions"
Option "Composite"
Option "RENDER" "Enable"
EndSection
Интересует Option "RENDER".

извините. у меня сессия была руки не доходили до компа. вот закончилась опят сел с линуксом разбираться. вот код из xorg.conf

Код:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 1.0 (buildmeister@builder26) Thu Feb 14 18:13:41 PST 2008 # File generated by XFdrake (rev 230776) # ********************************************************************** # Refer to the xorg.conf man page for details about the format of # this file. # ********************************************************************** Section "ServerLayout" Identifier "layout1" Screen "screen1" 0 0 InputDevice "Keyboard1" "CoreKeyboard" InputDevice "Mouse1" "CorePointer" InputDevice "Mouse2" "SendCoreEvents" EndSection Section "Module" Load "dbe" # Double-Buffering Extension Load "v4l" # Video for Linux Load "extmod" Load "type1" Load "freetype" Load "glx" # 3D layer EndSection Section "ServerFlags" #DontZap # disable <Ctrl><Alt><BS> (server abort) # allows the server to start up even if the mouse does not work #DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching) Option "allowmouseopenfail" EndSection Section "InputDevice" Identifier "Keyboard1" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us(alt-intl)" Option "XkbOptions" "compose:rwin" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "ExplorerPS/2" Option "Device" "/dev/mouse" EndSection Section "InputDevice" Identifier "Mouse2" Driver "evdev" Option "bustype" "0x0003" Option "relBits" "+0+1+2" Option "product" "0x0801" Option "vendor" "0x04fc" Option "HWheelRelativeAxisButtons" "7 6" EndSection Section "Monitor" # TV fullscreen mode or DVD fullscreen output. # 768x576 @ 79 Hz, 50 kHz hsync Identifier "monitor1" VendorName "Generic" ModelName "Flat Panel 1280x800" HorizSync 31.5 - 90.0 VertRefresh 60.0 ModeLine "768x576" 50.0 768 832 846 1000 576 590 595 630 ModeLine "768x576" 63.1 768 800 960 1024 576 578 590 616 ModeLine "1280x800_120" 181.2 1280 1376 1520 1760 800 801 804 858 -hsync +vsync ModeLine "1280x800_100" 147.9 1280 1376 1512 1744 800 801 804 848 -hsync +vsync ModeLine "1280x800_85" 123.4 1280 1368 1504 1728 800 801 804 840 -hsync +vsync ModeLine "1280x800_75" 107.2 1280 1360 1496 1712 800 801 804 835 -hsync +vsync ModeLine "1280x800_60" 83.5 1280 1344 1480 1680 800 801 804 828 -hsync +vsync ModeLine "1280x800_50" 68.6 1280 1336 1472 1664 800 801 804 824 -hsync +vsync EndSection Section "Device" Identifier "device1" Driver "nvidia" VendorName "nVidia Corporation" BoardName "NVIDIA GeForce FX - GeForce 8800" EndSection Section "Screen" Identifier "screen1" Device "device1" Monitor "monitor1" DefaultDepth 24 Option "DPMS" SubSection "Display" Depth 8 Modes "1280x800" EndSubSection SubSection "Display" Depth 15 Modes "1280x800" EndSubSection SubSection "Display" Depth 16 Modes "1280x800" EndSubSection SubSection "Display" Depth 24 Modes "1280x800" EndSubSection EndSection Section "Extensions" Option "Composite" EndSection
Спасибо сказали:
iskan1188
Сообщения: 9

Re: Compiz в Mandriva 2008

Сообщение iskan1188 »

iskan1188 писал(а):
05.03.2008 17:41
извините. у меня сессия была руки не доходили до компа. вот закончилась опят сел с линуксом разбираться. вот код из xorg.conf

Код:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 1.0 (buildmeister@builder26) Thu Feb 14 18:13:41 PST 2008 # File generated by XFdrake (rev 230776) # ********************************************************************** # Refer to the xorg.conf man page for details about the format of # this file. # ********************************************************************** Section "ServerLayout" Identifier "layout1" Screen "screen1" 0 0 InputDevice "Keyboard1" "CoreKeyboard" InputDevice "Mouse1" "CorePointer" InputDevice "Mouse2" "SendCoreEvents" EndSection Section "Module" Load "dbe" # Double-Buffering Extension Load "v4l" # Video for Linux Load "extmod" Load "type1" Load "freetype" Load "glx" # 3D layer EndSection Section "ServerFlags" #DontZap # disable <Ctrl><Alt><BS> (server abort) # allows the server to start up even if the mouse does not work #DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching) Option "allowmouseopenfail" EndSection Section "InputDevice" Identifier "Keyboard1" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us(alt-intl)" Option "XkbOptions" "compose:rwin" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "ExplorerPS/2" Option "Device" "/dev/mouse" EndSection Section "InputDevice" Identifier "Mouse2" Driver "evdev" Option "bustype" "0x0003" Option "relBits" "+0+1+2" Option "product" "0x0801" Option "vendor" "0x04fc" Option "HWheelRelativeAxisButtons" "7 6" EndSection Section "Monitor" # TV fullscreen mode or DVD fullscreen output. # 768x576 @ 79 Hz, 50 kHz hsync Identifier "monitor1" VendorName "Generic" ModelName "Flat Panel 1280x800" HorizSync 31.5 - 90.0 VertRefresh 60.0 ModeLine "768x576" 50.0 768 832 846 1000 576 590 595 630 ModeLine "768x576" 63.1 768 800 960 1024 576 578 590 616 ModeLine "1280x800_120" 181.2 1280 1376 1520 1760 800 801 804 858 -hsync +vsync ModeLine "1280x800_100" 147.9 1280 1376 1512 1744 800 801 804 848 -hsync +vsync ModeLine "1280x800_85" 123.4 1280 1368 1504 1728 800 801 804 840 -hsync +vsync ModeLine "1280x800_75" 107.2 1280 1360 1496 1712 800 801 804 835 -hsync +vsync ModeLine "1280x800_60" 83.5 1280 1344 1480 1680 800 801 804 828 -hsync +vsync ModeLine "1280x800_50" 68.6 1280 1336 1472 1664 800 801 804 824 -hsync +vsync EndSection Section "Device" Identifier "device1" Driver "nvidia" VendorName "nVidia Corporation" BoardName "NVIDIA GeForce FX - GeForce 8800" EndSection Section "Screen" Identifier "screen1" Device "device1" Monitor "monitor1" DefaultDepth 24 Option "DPMS" SubSection "Display" Depth 8 Modes "1280x800" EndSubSection SubSection "Display" Depth 15 Modes "1280x800" EndSubSection SubSection "Display" Depth 16 Modes "1280x800" EndSubSection SubSection "Display" Depth 24 Modes "1280x800" EndSubSection EndSection Section "Extensions" Option "Composite" EndSection

HELP ME PLEASE :cray:
Спасибо сказали: