Beryl

[NIK1910]

У меня другая сейчас проблема, при запуске firefox иксы мертво повисают, а клава не реагирует, интересно с чем это связанно.

[(asper]

У меня другая сейчас проблема, при запуске firefox иксы мертво повисают, а клава не реагирует, интересно с чем это связанно.

вот это случайно не ответ на ваш вопрос
http://wiki.archlinux.org/index.php/Beryl#...iftfox_Crashing

[Unicorn]

возможно, это ответ на мой вопрос:

I need more desktops, how do I get them?
You can increase the number of desktops by navigating to General Options -> Numerical Values in beryl-settings and changing the Horizontal Virtual Size to the desired size. Number of Desktops is NOT the right option , confusing, we know.

выделено мной.
да-а, поди догадайся...

[(asper]

возможно, это ответ на мой вопрос:

I need more desktops, how do I get them?
You can increase the number of desktops by navigating to General Options -> Numerical Values in beryl-settings and changing the Horizontal Virtual Size to the desired size. Number of Desktops is NOT the right option , confusing, we know.

выделено мной.
да-а, поди догадайся...

Horizontal Virtual Size Если я не ошибаюсь и есть кол-во граней "куба" , т.е. той 3-х мерной фигуры
А вообще вопрос неочень понятен

[Unicorn]

вопрос был на предыдущей странице.

[(asper]

Читал раньше, сейчас лень
Не означает ли это что вы нашли ответ на свой вопрос ?

[Unicorn]

Не означает ли это что вы нашли ответ на свой вопрос ?

Пока не могу сказать - необходимо потестировать эти самые настройки на боевой машине. А сейчас я на работе под виндой

[serzh-z]

Решил тоже посмотреть. Поставил - все, вроде, обошлось без проблем и завелось с полпинка. Есть два, имхо, огромных преимущества (для тех кто часто использует мышь/тачпад): можно очень удобно переключаться между окнами, путем тыканья на их искизы, очень удобно можно заставить "уехать" все окна за края раб. стола, чтобы увидеть что под ними. остально все то же самое, но вдобавок еще и класивое.

[Unicorn]

А можно сделать каждому виртуальному столу свою панель задач - как в GNOME. А то теряется смысл вирт. стола - заголовки всех окошек присутствуют на одной панели. Так можно и по Alt+Tab по ним бегать на одном столе как в винде - разницы никакой

Поковырялся с различными настройками - ничего не получилось. Пока виртуальные столы в бериле таковыми не являются, поскольку используют одну на всех панель задач. Профанация идеи.

[DZhon]

Мдя.. у меня вот что-то не завелся... точнее завелся, но ...
Декорации окон ну никак... и перегружаю и бестолку...

значит делал все, как http://ru.opensuse.org/Beryl тут

версии пакетов:
beryl-manager-061220-2.1
beryl-settings-061220-2.1
beryl-plugins-061220-2.1
beryl-core-061220-3.1

ни Emerland, ни Aqamarine не выполняют своих функций - декорации не пашут ... в kcontrol тени выключены, т.е. сам beryl на ура

использовал Драйверы 9629 nVidia, без AIGLX/XGL

UPD:
Проблема решилась установлением 24бит по дефолту и установко новых дров видеокарты

[new bee]

У кого-нибудь получалось прикрутить Skydome Image?
А то у меня только белый фон (проблема была еще в compiz'е) =((... и еще - пропадают изображения на горизонтальных гранях, когда юзаю n-гранник вместо куба.

[solshark]

У кого-нибудь получалось прикрутить Skydome Image?
А то у меня только белый фон (проблема была еще в compiz'е) =((...

Получилось, получилось. Там проблема с размером изображения. У меня получается юзать только 1024*512 (точно не помню, если не получится, отпишитесь в личку, вечером буду дома - уточню).

и еще - пропадают изображения на горизонтальных гранях, когда юзаю n-гранник вместо куба.

Ну это нормально, там же дефолтные картинки квадратные. Нарисуйте свою n-гранную и прикрутите, делов-то.

[sspphheerraa]

Хелп, народ
я запутался капитально... В общем так:
Gentoo Linux amd64
Видушка - GF6600GT
Ставил Х 7.1, затем дрова нвидии, потом ХГЛ, потом КДЕ, берил, аквамарин
в хорге дописал только

Код: Выделить всё

Section "Screen"
        Option      "AddARGBGLXVisuals" "true"
EndSection

Section "Extensions"
        Option      "Composite"   "enable"
EndSection

(не заработало (: выдавало только окно с серыми точечками)
теперь прочитал, что ХГЛ мне не нужен. Я его снес (emerge -aC xgl), переставил дрова... вернул конфиги
В итоге нарушилось вообще вся графика: никаких декораций я не вижу, КДЕ запускаю из иксов (по другому не получается), появляется стол, панельзадач, но с шапками как у нативного Х, пытаюсь прописать KDEWM=/usr/bin/beryl-manager в /etc/env.d/kdepaths, env-update - эффекта ноль
beryl-manager не запускается (не находит дисплей ) glxgears тоже самое
развертка экрана 60Гц, хотя должна быть 85

не зню что делать (: сносить X, KDE, и все остальные приблуды, после чего строить по новой но без xgl ?
пол года назад строил xgl, так в роде бы показалось легче

[solshark]

переставил дрова... вернул конфиги

Вот эти процедуры подробнее можно? Версию дров, какие конфиги куда вернули? И логи запуска иксов.
А сносить ничего не нужно, давайте лучше оживлять текущую систему.

[sspphheerraa]

OK, вот они
45kdepaths-3.5

Код: Выделить всё

PATH=/usr/kde/3.5/bin
ROOTPATH=/usr/kde/3.5/sbin:/usr/kde/3.5/bin
LDPATH=/usr/kde/3.5/lib:/usr/kde/3.5/lib64:/usr/kde/3.5/lib32
CONFIG_PROTECT="/usr/kde/3.5/share/config /usr/kde/3.5/env /usr/kde/3.5/shutdown /usr/share/config"
KDEDIRS="/usr/kde/3.5:/usr:/usr/local"
#KDE_IS_PRELINKED=1
#KDEWM=/usr/bin/beryl-manager

kdmrc

Код:

# KDM master configuration file # # Definition: the greeter is the login dialog, i.e., the part of KDM # which the user sees. # # You can configure every X-display individually. # Every display has a display name, which consists of a host name # (which is empty for local displays specified in {Static|Reserve}Servers), # a colon, and a display number. Additionally, a display belongs to a # display class (which can be ignored in most cases; the control center # does not support this feature at all). # Sections with display-specific settings have the formal syntax # "[X-" host [":" number [ "_" class ]] "-" sub-section "]" # You can use the "*" wildcard for host, number, and class. You may omit # trailing components; they are assumed to be "*" then. # The host part may be a domain specification like ".inf.tu-dresden.de". # It may also be "+", which means non-empty, i.e. remote displays only. # From which section a setting is actually taken is determined by these # rules: # - an exact match takes precedence over a partial match (for the host part), # which in turn takes precedence over a wildcard ("+" taking precedence # over "*") # - precedence decreases from left to right for equally exact matches # Example: display name "myhost:0", class "dpy". # [X-myhost:0_dpy] precedes # [X-myhost:0_*] (same as [X-myhost:0]) precedes # [X-myhost:*_dpy] precedes # [X-myhost:*_*] (same as [X-myhost]) precedes # [X-+:0_dpy] precedes # [X-*:0_dpy] precedes # [X-*:0_*] (same as [X-*:0]) precedes # [X-*:*_*] (same as [X-*]) # These sections do NOT match this display: # [X-hishost], [X-myhost:0_dec], [X-*:1], [X-:*] # If a setting is not found in any matching section, the default is used. # # Every comment applies to the following section or key. Note that all # comments will be lost if you change this file with the kcontrol frontend. # The defaults refer to KDM's built-in values, not anything set in this file. # # Special characters need to be backslash-escaped (leading and trailing # spaces (\s), tab (\t), linefeed (\n), carriage return (\r) and the # backslash itself (\\)). # In lists, fields are separated with commas without whitespace in between. # Some command strings are subject to simplified sh-style word splitting: # single quotes (') and double quotes (") have the usual meaning; the backslash # quotes everything (not only special characters). Note that the backslashes # need to be doubled because of the two levels of quoting. [General] # This option exists solely for the purpose of a clean automatic upgrade. # Do not even think about changing it! ConfigVersion=2.3 # List of permanent displays. Displays with a hostname are foreign. A display # class may be specified separated by an underscore. # Default is ":0" StaticServers=:0 # List of on-demand displays. See StaticServers for syntax. # Default is "" ReserveServers=:1,:2,:3 # VTs to allocate to X-servers. A negative number means that the VT will be # used only if it is free. If all VTs in this list are used up, the next free # one greater than the last one in this list will be allocated. # Default is "" ServerVTs=-7 # TTYs (without /dev/) to monitor for activity while in console mode. # Default is "" ConsoleTTYs=tty1,tty2,tty3,tty4,tty5,tty6 # Where KDM should store its PID (do not store if empty). # Default is "" PidFile=/var/run/kdm.pid # Whether KDM should lock the PID file to prevent having multiple KDM # instances running at once. Do not change unless you are brave. # Default is true #LockPidFile=false # Where to store authorization files. # Default is "/var/run/xauth" #AuthDir=/tmp # Whether KDM should automatically re-read configuration files, if it # finds them having changed. # Default is true #AutoRescan=false # Additional environment variables KDM should pass on to all programs it runs. # LD_LIBRARY_PATH and XCURSOR_THEME are good candidates; # otherwise, it should not be necessary very often. # Default is "" #ExportList=LD_LIBRARY_PATH,ANOTHER_IMPORTANT_VAR # A character device KDM should read entropy from. # Empty means use the system's preferred entropy device. # Default is "" #RandomDevice=/dev/altrandom # Where the command FiFos should be created; make it empty to disable # them. # Default is "/var/run/xdmctl" #FifoDir=/tmp # The group to which the global command FiFo should belong; # can be either a name or a numerical ID. # Default is 0 #FifoGroup=xdmctl # The directory in which KDM should store persistent working data. # Default is "/var/lib/kdm" #DataDir= # The directory in which KDM should store users' .dmrc files. This is only # needed if the home directories are not readable before actually logging in # (like with AFS). # Default is "" #DmrcDir=/nfs-shared/var/dmrcs [Xdmcp] # Whether KDM should listen to incoming XDMCP requests. # Default is true Enable=false # The UDP port on which KDM should listen for XDMCP requests. Do not change. # Default is 177 #Port=177 # File with the private keys of X-terminals. Required for XDM authentication. # Default is "" #KeyFile=/usr/kde/3.5/share/config/kdm/kdmkeys # XDMCP access control file in the usual XDM-Xaccess format. # Default is "/usr/kde/3.5/share/config/kdm/Xaccess" #Xaccess= # Number of seconds to wait for display to respond after the user has # selected a host from the chooser. # Default is 15 #ChoiceTimeout=10 # Strip domain name from remote display names if it is equal to the local # domain. # Default is true #RemoveDomainname=false # Use the numeric IP address of the incoming connection on multihomed hosts # instead of the host name. # Default is false #SourceAddress=true # The program which is invoked to dynamically generate replies to XDMCP # DirectQuery or BroadcastQuery requests. # If empty, no program is invoked and "Willing to manage" is sent. # Default is "" Willing=/usr/kde/3.5/share/config/kdm/Xwilling [Shutdown] # The command (subject to word splitting) to run to halt the system. # Default is "/sbin/halt" #HaltCmd= # The command (subject to word splitting) to run to reboot the system. # Default is "/sbin/reboot" #RebootCmd= # Whether it is allowed to shut down the system via the global command FiFo. # Default is false #AllowFifo=true # Whether it is allowed to abort active sessions when shutting down the # system via the global command FiFo. # Default is true #AllowFifoNow=false # The boot manager KDM should use for offering boot options in the # shutdown dialog. # "None" - no boot manager # "Grub" - Grub boot manager # "Lilo" - Lilo boot manager (Linux on i386 & x86-64 only) # Default is None #BootManager=Grub # Rough estimations about how many seconds KDM will spend at most on # - opening a connection to the X-server (OpenTime) if the attempt # - times out: OpenTimeout # - is refused: OpenRepeat * OpenDelay # - starting a local X-server (ServerTime): # ServerAttempts * (ServerTimeout + OpenDelay) # - starting a display: # - local display: ServerTime + OpenTime # - foreign display: StartAttempts * OpenTime # - XDMCP display: OpenTime (repeated indefinitely by client) # Core config for all displays [X-*-Core] # How long to wait before retrying to connect a display. # Default is 15 #OpenDelay=15 # How long to wait before timing out a display connection attempt. # Default is 120 #OpenTimeout=120 # How many connection attempts to make during a start attempt. Note that # a timeout aborts the entire start attempt. # Default is 5 #OpenRepeat=5 # Try at most that many times to start a display. If this fails, the display # is disabled. # Default is 4 #StartAttempts=4 # Ping remote display every that many minutes. # Default is 5 #PingInterval=5 # Wait for a Pong that many minutes. # Default is 5 #PingTimeout=5 # The name of this X-server's Xauth file. # If empty, a random name in the AuthDir directory will be used. # Default is "" #AuthFile= # Specify a file with X-resources for the greeter, chooser and background. # The KDE frontend does not use this file, so you do not need it unless you # use another background generator than krootimage. # Default is "" #Resources= # The xrdb program to use to read the above specified recources. # Subject to word splitting. # Default is "/usr/bin/xrdb" #Xrdb= # A program to run before the greeter is shown. Can be used to start an # xconsole or an alternative background generator. Subject to word splitting. # Default is "" Setup=/usr/kde/3.5/share/config/kdm/Xsetup # A program to run before a user session starts. Subject to word splitting. # Default is "" Startup=/usr/kde/3.5/share/config/kdm/Xstartup # A program to run after a user session exits. Subject to word splitting. # Default is "" Reset=/usr/kde/3.5/share/config/kdm/Xreset # The program which is run as the user which logs in. It is supposed to # interpret the session argument (see SessionsDirs) and start an appropriate # session according to it. Subject to word splitting. # Default is "/usr/bin/xterm -ls -T" Session=/usr/kde/3.5/share/config/kdm/Xsession # The program to run if Session fails. # Default is "/usr/bin/xterm" #FailsafeClient= # The PATH for the Session program. # Default is "/usr/local/bin:/usr/bin:/bin:/usr/bin:/usr/games" #UserPath= # The PATH for Setup, Startup and Reset, etc. # Default is "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin" #SystemPath= # The default system shell. # Default is "/bin/sh" #SystemShell=/bin/bash # Where to put the user's X-server authorization file if ~/.Xauthority # cannot be created. # Default is "/tmp" #UserAuthDir= # Whether to automatically restart sessions after X-server crashes. # Note that enabling this makes circumventing screen lockers other than # KDE's built-in one possible! # Default is false #AutoReLogin=true # Allow root logins? # Default is true AllowRootLogin=false # Allow to log in, when user has set an empty password? # Default is true AllowNullPasswd=false # Who is allowed to shut down the system. This applies both to the # greeter and to the command FiFo. # "None" - no "Shutdown..." menu entry is shown at all # "Root" - the root password must be entered to shut down # "All" - everybody can shut down the machine # Default is All AllowShutdown=Root # Who is allowed to abort active sessions when shutting down. # "None" - no forced shutdown is allowed at all # "Root" - the root password must be entered to shut down forcibly # "All" - everybody can shut down the machine forcibly # Default is All #AllowSdForceNow=Root # The default choice for the shutdown condition/timing. # "Schedule" - shut down after all active sessions exit (possibly at once) # "TryNow" - shut down, if no active sessions are open; otherwise, do nothing # "ForceNow" - shut down unconditionally # Default is Schedule #DefaultSdMode=ForceNow # How to offer shutdown scheduling options: # "Never" - not at all # "Optional" - as a button in the simple shutdown dialogs # "Always" - instead of the simple shutdown dialogs # Default is Never #ScheduledSd=Optional # The directories containing session type definitions in .desktop format. # Default is "/usr/kde/3.5/share/apps/kdm/sessions" SessionsDirs=/usr/share/xsessions #SessionsDirs=/etc/X11/sessions,/usr/share/xsessions # The file (relative to $HOME) to redirect the session output to. This is # a printf format string; one %s will be replaced with the display name. # Default is ".xsession-errors" ClientLogFile=.xsession-errors-%s # Whether KDM's built-in utmp/wtmp/lastlog registration should be used. # Default is true #UseSessReg=false # Greeter config for all displays [X-*-Greeter] # Widget style of the greeter. "" means the built-in default which currently # is "Plastik". # Default is "" #GUIStyle=Windows # Widget color scheme of the greeter. "" means the built-in default which # currently is yellowish grey with some light blue and yellow elements. # Default is "" #ColorScheme=Pumpkin # What should be shown in the greeter's logo are: # "None" - nothing # "Logo" - the image specified by LogoPixmap # "Clock" - a neat analog clock # Default is Clock LogoArea=Logo # The image to show when LogoArea=Logo. # Default is "" LogoPixmap=/usr/kde/3.5/share/apps/kdm/pics/kdelogo.png # The relative coordinates (X,Y in percent) of the center of the greeter. # Default is "50,50" #GreeterPos=30,40 # The screen the greeter should be displayed on in multi-headed and Xinerama # setups. The numbering starts with 0. For Xinerama, it corresponds to the # listing order in the active ServerLayout section of XF86Config; -1 means # to use the upper-left screen, -2 means to use the upper-right screen. # Default is 0 #GreeterScreen=-1 # The headline in the greeter. The following character pairs are replaced: # - %d -> current display # - %h -> host name, possibly with domain name # - %n -> node name, most probably the host name without domain name # - %s -> the operating system # - %r -> the operating system's version # - %m -> the machine (hardware) type # - %% -> a single % # Default is "Welcome to %s at %n" #GreetString=K Desktop Environment (%n) # Whether the fonts used in the greeter should be antialiased. # Default is false #AntiAliasing=true # The font for the greeter headline. # Default is "Serif,20,bold" #GreetFont=Serif,20,5,0,50,0 # The normal font used in the greeter. # Default is "Sans Serif,10" #StdFont=Sans Serif,10,5,0,50,0 # The font used for the "Login Failed" message. # Default is "Sans Serif,10,bold" #FailFont=Sans Serif,10,5,0,75,0 # What to do with the Num Lock modifier for the time the greeter is running: # "Off" - turn off # "On" - turn on # "Keep" - do not change the state # Default is Keep #NumLock=Off # Language and locale to use in the greeter, encoded like $LC_LANG. # Default is "en_US" #Language=de_DE # Enable autocompletion in the username line edit. # Default is false #UserCompletion=true # Enable user list (names along with images) in the greeter. # Default is true #UserList=false # User selection for UserCompletion and UserList: # "NotHidden" - all users except those listed in HiddenUsers # "Selected" - only the users listed in SelectedUsers # Default is NotHidden #ShowUsers=Selected # For ShowUsers=Selected. @<group> means all users in that group. # Default is "" #SelectedUsers=root,johndoe # For ShowUsers=NotHidden. @<group> means all users in that group. # Default is "" #HiddenUsers=root # Special case of HiddenUsers: users with a non-zero UID less than this number # will not be shown as well. # Default is 0 MinShowUID=1000 # Complement to MinShowUID: users with a UID greater than this number will # not be shown as well. # Default is 65535 MaxShowUID=65000 # If false, the users are listed in the order they appear in /etc/passwd. # If true, they are sorted alphabetically. # Default is true #SortUsers=false # Specify, where the users' pictures should be taken from. # "AdminOnly" - from <FaceDir>/$USER.face[.icon] # "PreferAdmin" - prefer <FaceDir>, fallback on $HOME # "PreferUser" - ... and the other way round # "UserOnly" - from the user's $HOME/.face[.icon] # Default is AdminOnly #FaceSource=PreferUser # The directory containing the user images if FaceSource is not UserOnly. # Default is "/usr/kde/3.5/share/apps/kdm/faces" #FaceDir=/usr/share/faces # Specify, if/which user should be preselected for log in. # "None" - do not preselect any user # "Previous" - the user which successfully logged in last time # "Default" - the user specified in the DefaultUser option # Default is None #PreselectUser=Previous # If this is true, the password input line is focused automatically if # a user is preselected. # Default is false #FocusPasswd=true # The password input fields cloak the typed in text. Specify, how to do it: # "OneStar" - <literal>*</literal> is shown for every typed letter # "ThreeStars" - <literal>***</literal> is shown for every typed letter # "NoEcho" - nothing is shown at all, the cursor does not move # Default is OneStar #EchoMode=NoEcho # If true, krootimage will be automatically started by KDM; otherwise, the # Setup script should be used to setup the background. # Default is true #UseBackground=false # The configuration file to be used by krootimage. # Default is "/usr/kde/3.5/share/config/kdm/backgroundrc" #BackgroundCfg= # Hold the X-server grabbed the whole time the greeter is visible. This # may be more secure, but it will disable any background and other # X-clients started from the Setup script. # Default is false #GrabServer=true # How many seconds to wait for grab to succeed. # Default is 3 #GrabTimeout=3 # Warn, if display has no X-authorization (local auth cannot be created, # XDMCP display wants no auth, or display is foreign from StaticServers). # Default is true #AuthComplain=false # Random seed for forging saved session types, etc. of unknown users. # This value should be random but constant across the login domain. # Default is 0 ForgingSeed=1167756791 # Specify conversation plugins for the login dialog. Each plugin can be # specified as a base name (which expands to $kde_modulesdir/kgreet_$base) # or as a full pathname. # Default is "classic" #PluginsLogin=sign # Same as PluginsLogin, but for the shutdown dialog. # Default is "classic" #PluginsShutdown=modern # A list of options of the form Key=Value. The conversation plugins can query # these settings; it is up to them what possible keys are. # Default is "" #PluginOptions=SomeKey=randomvalue,Foo=bar # Show the "Console Login" action in the greeter (if ServerTTY/ConsoleTTYs # is configured). # Default is true #AllowConsole=false # A program to run while the greeter is visible. It is supposed to preload # as much as possible of the session that is going to be started (most # probably). # Default is "" Preloader=/usr/kde/3.5/bin/preloadkde # Whether the greeter should be themed. # Default is false #UseTheme=true # The theme to use for the greeter. Can point to either a directory or an XML # file. # Default is "" Theme=/usr/kde/3.5/share/apps/kdm/themes/circles # Core config for local displays [X-:*-Core] # How often to try to run the X-server. Running includes executing it and # waiting for it to come up. # Default is 1 #ServerAttempts=1 # How long to wait for a local X-server to come up. # Default is 15 ServerTimeout=30 # The command line to start the X-server, without display number and VT spec. # This string is subject to word splitting. # Default is "/usr/bin/X -br" ServerCmd=/usr/bin/X -br #Additional arguments for the X-servers for local sessions. # This string is subject to word splitting. # Default is "" ServerArgsLocal=-nolisten tcp # Additional arguments for the X-servers for remote sessions. # This string is subject to word splitting. # Default is "" #ServerArgsRemote= # Restart instead of resetting the local X-server after session exit. # Use it if the server leaks memory etc. # Default is false #TerminateServer=true # The signal needed to reset the local X-server. # Default is 1 (SIGHUP) #ResetSignal=1 # The signal needed to terminate the local X-server. # Default is 15 (SIGTERM) #TermSignal=15 # Create X-authorizations for local displays. # Default is true #Authorize=false # Which X-authorization mechanisms should be used. # Default is "MIT-MAGIC-COOKIE-1" #AuthNames= # Need to reset the X-server to make it read initial Xauth file. # Default is false #ResetForAuth=true # See above AllowNullPasswd=true # See above AllowShutdown=All # Enable password-less logins on this display. USE WITH EXTREME CARE! # Default is false #NoPassEnable=true # The users that do not need to provide a password to log in. NEVER list root! # "*" means all non-root users. @<group> means all users in that group. # Default is "" #NoPassUsers=fred,ethel # Greeter config for local displays [X-:*-Greeter] # See above PreselectUser=Previous # See above FocusPasswd=true # Specify whether the greeter of local displays should start up in host chooser # (remote) or login (local) mode and whether it is allowed to switch to the # other mode. # "LocalOnly" - only local login possible # "DefaultLocal" - start up in local mode, but allow switching to remote mode # "DefaultRemote" - ... and the other way round # "RemoteOnly" - only choice of remote host possible # Default is LocalOnly LoginMode=DefaultLocal # A list of hosts to be automatically added to the remote login menu. The # special name "*" means broadcast. # Default is "*" #ChooserHosts=*,ugly,sky,dino,kiste.local,login.crap.com # Show the "Restart X Server"/"Close Connection" action in the greeter. # Default is true AllowClose=false # Core config for 1st local display [X-:0-Core] # The VT the X-server should run on; auto-assign if zero, don't assign if -1. # Better leave it zero and use ServerVTs. # Default is 0 #ServerVT=7 # Enable automatic login. USE WITH EXTREME CARE! # Default is false #AutoLoginEnable=true # If true, auto-login after logout. If false, auto-login is performed only # when a display session starts up. # Default is false #AutoLoginAgain=true # The delay in seconds before automatic login kicks in. # Default is 0 #AutoLoginDelay=10 # The user to log in automatically. NEVER specify root! # Default is "" #AutoLoginUser=fred # The password for the user to log in automatically. This is NOT required # unless the user is logged into a NIS or Kerberos domain. If you use this # option, you should "chmod 600 kdmrc" for obvious reasons. # Default is "" #AutoLoginPass=secret! # Immediately lock the automatically started session. This works only with # KDE sessions. # Default is false #AutoLoginLocked=true # See above ClientLogFile=.xsession-errors # Greeter config for 1st local display [X-:0-Greeter] # See above #PreselectUser=Default # The user to preselect if PreselectUser=Default. # Default is "" #DefaultUser=johndoe

rc.conf

Код:

# /etc/rc.conf: Global startup script configuration settings # UNICODE specifies whether you want to have UNICODE support in the console. # If you set to yes, please make sure to set a UNICODE aware CONSOLEFONT and # KEYMAP in the /etc/conf.d/consolefont and /etc/conf.d/keymaps config files. UNICODE="yes" # Set EDITOR to your preferred editor. # You may use something other than what is listed here. EDITOR="/bin/nano" #EDITOR="/usr/bin/vim" #EDITOR="/usr/bin/emacs" # XSESSION is a new variable to control what window manager to start # default with X if run with xdm, startx or xinit. The default behavior # is to look in /etc/X11/Sessions/ and run the script in matching the # value that XSESSION is set to. The support scripts are smart enough to # look in all bin directories if it cant find a match in /etc/X11/Sessions/, # so setting it to "enlightenment" can also work. This is basically used # as a way for the system admin to configure a default system wide WM, # allthough it will work if the user export XSESSION in his .bash_profile, etc. # # NOTE: 1) this behaviour is overridden when a ~/.xinitrc exists, and startx # is called. # 2) even if ~/.xsession exists, if XSESSION can be resolved, it will # be executed rather than ~/.xsession, else KDM breaks ... # # Defaults depending on what you install currently include: # # Gnome - will start gnome-session # kde-<version> - will start startkde (look in /etc/X11/Sessions/) # Xsession - will start a terminal and a few other nice apps

xorg.conf

Код:

Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" RgbPath "/usr/share/X11/rgb" ModulePath "/usr/lib64/xorg/modules" FontPath "/usr/share/fonts/misc/" FontPath "/usr/share/fonts/TTF/" FontPath "/usr/share/fonts/OTF" FontPath "/usr/share/fonts/Type1/" FontPath "/usr/share/fonts/CID/" FontPath "/usr/share/fonts/75dpi/" FontPath "/usr/share/fonts/100dpi/" EndSection Section "Module" Load "glx" Load "extmod" Load "wfb" Load "xtrap" Load "record" Load "dbe" # Load "dri" Load "freetype" Load "type1" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Sony Trinitron E100" EndSection Section "Device" Identifier "Card0" Driver "nvidia" VendorName "nVidia Corporation" BoardName "NV43 [GeForce 6600 GT]" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

nvidia-drivers-1.0.9746

Лог иксов прикрепил

[mops]

Как раз перед новым годом решил поставить из дополнительного репозитария Beryl. Да, в сравнении с Compiz он далеко ушёл. Работает быстрее, стабильнее и всё такое.
Что бы я оставил для повседневной работы:
1. групирование всех окон на экране - однозначно полезная вещица
2. переключение окошек alt+tab тоже неплохо смотрится

Всё остальное мне просто не нужно в повседневной жизни за ПК. Хотя в КДЕ4 говорят kwin будет поддерживать работу через GL. Возможно после тесной интеграции с десктопом от этих свистулек будет больше толку...

[estarchak]

Section "Screen"
Option "AddARGBGLXVisuals" "true"
EndSection

Section "Extensions"
Option "Composite" "enable"
EndSection

Это нужно в XOrg 7.1 для работы Beryl.

Хотя в КДЕ4 говорят kwin будет поддерживать работу через GL.

Поставьте не Emerald, а Aquamarine - и используйте темы КДЕ :-)

[solshark]

2MAA: Итак, батенька, давайте для начала xorg.conf в порядок приведем.
1. Добавляем те опции, что Вы уже добавляли. (AddARGBGLXVisuals, Composite).
В секцию Screen добавляем

Код: Выделить всё

   DefaultDepth  24

XGL, насколько я понял, уже снесен? Пробуем запускать beryl и emerald.
Логи запуска в студию.
И что там на счет КДЕ? Вы иксы как запускаете? startx? Надо посмотреть, почему кеды не запускаются.
Покажите-ка свой ~/.xinitrc

[mops]

Поставьте не Emerald, а Aquamarine - и используйте темы КДЕ :-)

Я не о темах. MacOSX видели? Вот я о такой интеграции

[sspphheerraa]

Да, хорг это первостепенно, как указано в доках на оффсайте - генерить лучше автоматом
до этого запускал

Код: Выделить всё

xorgconfig

и отвечал на вопросы (на половину которых ответа не знал) - в итоге... кое-как настроеный xorg.conf
попробовал выполнить (+подправил мышь, и раскладки)

Код: Выделить всё

xorgcfg

сгенерило, теперь startx грузится НАМНОГО быстрее, поставилось правильное разрешение и развертка
но после заставки nVidia появляется серо-белый экран ("мелкая чешуя") и мышь в центре (куда делся twm....?) блин
попробовал так

Код: Выделить всё

# startx & xterm

нет консоли (промелькнуло что-то про "не могу найти screen")
~/.xinitrc загадочно исчез, в общем нет его вообще

короче параметры запуска иксов настроились, но нет менеджера окон
Признаться, в первый раз на этом спотыкаюсь. Раньше как-то не заморачивался - делал по инструкции, и все работало. Стоило сделать лишнее... и вот те на

лог KDE пока не могу показать/запустить (из консоли он "not found", а в иксе консоли исчезли)

____
спасибо за поддержку

[solshark]

~/.xinitrc загадочно исчез, в общем нет его вообще

короче параметры запуска иксов настроились, но нет менеджера окон
Признаться, в первый раз на этом спотыкаюсь. Раньше как-то не заморачивался - делал по инструкции, и все работало. Стоило сделать лишнее... и вот те на

лог KDE пока не могу показать/запустить (из консоли он "not found", а в иксе консоли исчезли)

Код: Выделить всё

#echo "exec startkde" > ~/.xinitrc
#startx

Результаты сообщить в Ставку

[sspphheerraa]

Есть!
KDE запустился сразу из консоли, но в настройках стоит разрешение 1024х768@50Hz, а реально (кнопка меню на самом мониторе тоже умеет выводить текушее разрешение) - 1024х768@85Hz
не знаю откуда в системе такие цифры
в оконном терминале

Код: Выделить всё

# localhost ~ # glxgears
Error: couldn't open display (null)
# localhost ~ # glxinfo
Error: unable to open display (null)
# localhost ~ #

вот логи:
X

Код:

X Window System Version 7.1.1 Release Date: 12 May 2006 X Protocol Version 11, Revision 0, Release 7.1.1 Build Operating System: UNKNOWN Current Operating System: Linux localhost 2.6.18-gentoo-r6 #2 PREEMPT Mon Jan 1 14:44:38 EET 2007 x86_64 Build Date: 01 January 2007 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 3 22:10:08 2007 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "X.org Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (WW) The directory "/usr/share/fonts/TTF/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/OTF" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/CID/" does not exist. Entry deleted from font path. (**) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi/, /usr/share/fonts/75dpi/ (**) RgbPath set to "/usr/share/X11/rgb" (**) ModulePath set to "/usr/lib64/xorg/modules" (**) Extension "Composite" is enabled (**) Extension "RENDER" is enabled (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 1.0 X.Org XInput driver : 0.6 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/lib64/xorg/modules/fonts/libbitmap.so (II) Module bitmap: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/lib64/xorg/modules/libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.0 (--) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 10de,005e card 1043,815a rev a3 class 05,80,00 hdr 00 (II) PCI: 00:01:0: chip 10de,0050 card 1043,815a rev a3 class 06,01,00 hdr 80 (II) PCI: 00:01:1: chip 10de,0052 card 1043,815a rev a2 class 0c,05,00 hdr 80 (II) PCI: 00:02:0: chip 10de,005a card 1043,815a rev a2 class 0c,03,10 hdr 80 (II) PCI: 00:02:1: chip 10de,005b card 1043,815a rev a3 class 0c,03,20 hdr 80 (II) PCI: 00:04:0: chip 10de,0059 card 1043,812a rev a2 class 04,01,00 hdr 00 (II) PCI: 00:06:0: chip 10de,0053 card 1043,815a rev a2 class 01,01,8a hdr 00 (II) PCI: 00:07:0: chip 10de,0054 card 1043,815a rev a3 class 01,01,85 hdr 00 (II) PCI: 00:08:0: chip 10de,0055 card 1043,815a rev a3 class 01,01,85 hdr 00 (II) PCI: 00:09:0: chip 10de,005c card 0000,0000 rev a2 class 06,04,01 hdr 01 (II) PCI: 00:0a:0: chip 10de,0057 card 1043,8141 rev a3 class 06,80,00 hdr 00 (II) PCI: 00:0b:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01 (II) PCI: 00:0c:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01 (II) PCI: 00:0d:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01 (II) PCI: 00:0e:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01 (II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 01:00:0: chip 10de,0140 card 0000,0000 rev a2 class 03,00,00 hdr 00 (II) PCI: 05:06:0: chip 1131,7134 card 5168,0138 rev 01 class 04,80,00 hdr 00 (II) PCI: 05:07:0: chip 1106,3044 card 1106,3044 rev 46 class 0c,00,10 hdr 00 (II) PCI: End of PCI scan (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) Subtractive PCI-to-PCI bridge: (II) Bus 5: bridge is at (0:9:0), (0,5,5), BCTRL: 0x0202 (VGA_EN is cleared) (II) Bus 5 I/O range: [0] -100x0000a000 - 0x0000afff (0x1000) IX (II) Bus 5 non-prefetchable memory range: [0] -100xd0000000 - 0xd00fffff (0x100000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 4: bridge is at (0:11:0), (0,4,4), BCTRL: 0x0002 (VGA_EN is cleared) (II) PCI-to-PCI bridge: (II) Bus 3: bridge is at (0:12:0), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared) (II) PCI-to-PCI bridge: (II) Bus 2: bridge is at (0:13:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared) (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:14:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set) (II) Bus 1 non-prefetchable memory range: [0] -100xb0000000 - 0xcfffffff (0x20000000) MX[B] (II) Bus 1 prefetchable memory range: [0] -100x30000000 - 0x300fffff (0x100000) MX[B] (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:24:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -100x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -100x00000000 - 0xffffffff (0x100000000) MX[B] (II) Bus 0 prefetchable memory range: [0] -100x00000000 - 0xffffffff (0x100000000) MX[B] (--) PCI:*(1:0:0) nVidia Corporation NV43 [GeForce 6600 GT] rev 162, Mem @ 0xc0000000/24, 0xb0000000/28, 0xc1000000/24 (II) Addressable bus resource ranges are [0] -100x00000000 - 0xffffffff (0x100000000) MX[B] [1] -100x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -100x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -100x000f0000 - 0x000fffff (0x10000) MX[B] [2] -100x000c0000 - 0x000effff (0x30000) MX[B] [3] -100x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -100x0000ffff - 0x0000ffff (0x1) IX[B] [5] -100x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -100xd0001000 - 0xd00017ff (0x800) MX[B] [1] -100xd0000000 - 0xd00003ff (0x400) MX[B] [2] -100xd0100000 - 0xd0100fff (0x1000) MX[B] [3] -100xd0101000 - 0xd0101fff (0x1000) MX[B] [4] -100xd0102000 - 0xd0102fff (0x1000) MX[B] [5] -100xd0103000 - 0xd0103fff (0x1000) MX[B] [6] -100xd0105000 - 0xd01050ff (0x100) MX[B] [7] -100xd0104000 - 0xd0104fff (0x1000) MX[B] [8] -100xc1000000 - 0xc1ffffff (0x1000000) MX[B](B) [9] -100xb0000000 - 0xbfffffff (0x10000000) MX[B](B) [10] -100xc0000000 - 0xc0ffffff (0x1000000) MX[B](B) [11] -100x0000a000 - 0x0000a07f (0x80) IX[B] [12] -100x0000b000 - 0x0000b007 (0x8) IX[B] [13] -100x0000c400 - 0x0000c40f (0x10) IX[B] [14] -100x00000b60 - 0x00000b63 (0x4) IX[B] [15] -100x00000960 - 0x00000967 (0x8) IX[B] [16] -100x00000be0 - 0x00000be3 (0x4) IX[B] [17] -100x000009e0 - 0x000009e7 (0x8) IX[B] [18] -100x0000d800 - 0x0000d80f (0x10) IX[B] [19] -100x00000b70 - 0x00000b73 (0x4) IX[B] [20] -100x00000970 - 0x00000977 (0x8) IX[B] [21] -100x00000bf0 - 0x00000bf3 (0x4) IX[B] [22] -100x000009f0 - 0x000009f7 (0x8) IX[B] [23] -100x0000f000 - 0x0000f00f (0x10) IX[B] [24] -100x0000e000 - 0x0000e0ff (0x100) IX[B] [25] -100x0000dc00 - 0x0000dcff (0x100) IX[B] [26] -100x00004c40 - 0x00004c7f (0x40) IX[B] [27] -100x00004c00 - 0x00004c3f (0x40) IX[B] [28] -100x0000e400 - 0x0000e41f (0x20) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -100xd0001000 - 0xd00017ff (0x800) MX[B] [1] -100xd0000000 - 0xd00003ff (0x400) MX[B] [2] -100xd0100000 - 0xd0100fff (0x1000) MX[B] [3] -100xd0101000 - 0xd0101fff (0x1000) MX[B] [4] -100xd0102000 - 0xd0102fff (0x1000) MX[B] [5] -100xd0103000 - 0xd0103fff (0x1000) MX[B] [6] -100xd0105000 - 0xd01050ff (0x100) MX[B] [7] -100xd0104000 - 0xd0104fff (0x1000) MX[B] [8] -100xc1000000 - 0xc1ffffff (0x1000000) MX[B](B) [9] -100xb0000000 - 0xbfffffff (0x10000000) MX[B](B) [10] -100xc0000000 - 0xc0ffffff (0x1000000) MX[B](B) [11] -100x0000a000 - 0x0000a07f (0x80) IX[B] [12] -100x0000b000 - 0x0000b007 (0x8) IX[B] [13] -100x0000c400 - 0x0000c40f (0x10) IX[B] [14] -100x00000b60 - 0x00000b63 (0x4) IX[B] [15] -100x00000960 - 0x00000967 (0x8) IX[B] [16] -100x00000be0 - 0x00000be3 (0x4) IX[B] [17] -100x000009e0 - 0x000009e7 (0x8) IX[B] [18] -100x0000d800 - 0x0000d80f (0x10) IX[B] [19] -100x00000b70 - 0x00000b73 (0x4) IX[B] [20] -100x00000970 - 0x00000977 (0x8) IX[B] [21] -100x00000bf0 - 0x00000bf3 (0x4) IX[B] [22] -100x000009f0 - 0x000009f7 (0x8) IX[B] [23] -100x0000f000 - 0x0000f00f (0x10) IX[B] [24] -100x0000e000 - 0x0000e0ff (0x100) IX[B] [25] -100x0000dc00 - 0x0000dcff (0x100) IX[B] [26] -100x00004c40 - 0x00004c7f (0x40) IX[B] [27] -100x00004c00 - 0x00004c3f (0x40) IX[B] [28] -100x0000e400 - 0x0000e41f (0x20) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -100x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -100x000f0000 - 0x000fffff (0x10000) MX[B] [2] -100x000c0000 - 0x000effff (0x30000) MX[B] [3] -100x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -100x0000ffff - 0x0000ffff (0x1) IX[B] [5] -100x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -100x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -100x000f0000 - 0x000fffff (0x10000) MX[B] [2] -100x000c0000 - 0x000effff (0x30000) MX[B] [3] -100x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -100xd0001000 - 0xd00017ff (0x800) MX[B] [5] -100xd0000000 - 0xd00003ff (0x400) MX[B] [6] -100xd0100000 - 0xd0100fff (0x1000) MX[B] [7] -100xd0101000 - 0xd0101fff (0x1000) MX[B] [8] -100xd0102000 - 0xd0102fff (0x1000) MX[B] [9] -100xd0103000 - 0xd0103fff (0x1000) MX[B] [10] -100xd0105000 - 0xd01050ff (0x100) MX[B] [11] -100xd0104000 - 0xd0104fff (0x1000) MX[B] [12] -100xc1000000 - 0xc1ffffff (0x1000000) MX[B](B) [13] -100xb0000000 - 0xbfffffff (0x10000000) MX[B](B) [14] -100xc0000000 - 0xc0ffffff (0x1000000) MX[B](B) [15] -100x0000ffff - 0x0000ffff (0x1) IX[B] [16] -100x00000000 - 0x000000ff (0x100) IX[B] [17] -100x0000a000 - 0x0000a07f (0x80) IX[B] [18] -100x0000b000 - 0x0000b007 (0x8) IX[B] [19] -100x0000c400 - 0x0000c40f (0x10) IX[B] [20] -100x00000b60 - 0x00000b63 (0x4) IX[B] [21] -100x00000960 - 0x00000967 (0x8) IX[B] [22] -100x00000be0 - 0x00000be3 (0x4) IX[B] [23] -100x000009e0 - 0x000009e7 (0x8) IX[B] [24] -100x0000d800 - 0x0000d80f (0x10) IX[B] [25] -100x00000b70 - 0x00000b73 (0x4) IX[B] [26] -100x00000970 - 0x00000977 (0x8) IX[B] [27] -100x00000bf0 - 0x00000bf3 (0x4) IX[B] [28] -100x000009f0 - 0x000009f7 (0x8) IX[B] [29] -100x0000f000 - 0x0000f00f (0x10) IX[B] [30] -100x0000e000 - 0x0000e0ff (0x100) IX[B] [31] -100x0000dc00 - 0x0000dcff (0x100) IX[B] [32] -100x00004c40 - 0x00004c7f (0x40) IX[B] [33] -100x00004c00 - 0x00004c3f (0x40) IX[B] [34] -100x0000e400 - 0x0000e41f (0x20) IX[B] (II) LoadModule: "glx" (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so (II) Module glx: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.9746 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.1 (II) Loading extension GLX (II) LoadModule: "extmod" (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "wfb" (II) Loading /usr/lib64/xorg/modules/extensions/libwfb.so (II) Module wfb: vendor="X.Org Foundation" compiled for 7.1.99.2, module version = 1.0.0 (II) LoadModule: "xtrap" (II) Loading /usr/lib64/xorg/modules/extensions/libxtrap.so (II) Module xtrap: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension DEC-XTRAP (II) LoadModule: "record" (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension RECORD (II) LoadModule: "dbe" (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "dri" (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/lib64/xorg/modules/linux/libdrm.so (II) Module drm: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading extension XFree86-DRI (II) LoadModule: "freetype" (II) Loading /usr/lib64/xorg/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 7.1.1, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font FreeType (II) LoadModule: "type1" (II) Loading /usr/lib64/xorg/modules/fonts/libtype1.so (II) Module type1: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Type1 (II) LoadModule: "nvidia" (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so (II) Module nvidia: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.9746 Module class: X.Org Video Driver (II) LoadModule: "mouse" (II) Loading /usr/lib64/xorg/modules/input/mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.6 (II) LoadModule: "kbd" (II) Loading /usr/lib64/xorg/modules/input/kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.6 (II) NVIDIA dlloader X Driver 1.0-9746 Fri Dec 15 10:21:43 PST 2006 (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs (II) Primary Device is: PCI 01:00:0 (--) Chipset NVIDIA GPU found (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib64/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.3 (II) Loading sub module "wfb" (II) LoadModule: "wfb" (II) Reloading /usr/lib64/xorg/modules/extensions/libwfb.so (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/lib64/xorg/modules/libramdac.so (II) Module ramdac: vendor="X.Org Foundation" compiled for 7.1.1, module version = 0.1.0 ABI class: X.Org Video Driver, version 1.0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -100x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -100x000f0000 - 0x000fffff (0x10000) MX[B] [2] -100x000c0000 - 0x000effff (0x30000) MX[B] [3] -100x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -100xd0001000 - 0xd00017ff (0x800) MX[B] [5] -100xd0000000 - 0xd00003ff (0x400) MX[B] [6] -100xd0100000 - 0xd0100fff (0x1000) MX[B] [7] -100xd0101000 - 0xd0101fff (0x1000) MX[B] [8] -100xd0102000 - 0xd0102fff (0x1000) MX[B] [9] -100xd0103000 - 0xd0103fff (0x1000) MX[B] [10] -100xd0105000 - 0xd01050ff (0x100) MX[B] [11] -100xd0104000 - 0xd0104fff (0x1000) MX[B] [12] -100xc1000000 - 0xc1ffffff (0x1000000) MX[B](B) [13] -100xb0000000 - 0xbfffffff (0x10000000) MX[B](B) [14] -100xc0000000 - 0xc0ffffff (0x1000000) MX[B](B) [15] -100x0000ffff - 0x0000ffff (0x1) IX[B] [16] -100x00000000 - 0x000000ff (0x100) IX[B] [17] -100x0000a000 - 0x0000a07f (0x80) IX[B] [18] -100x0000b000 - 0x0000b007 (0x8) IX[B] [19] -100x0000c400 - 0x0000c40f (0x10) IX[B] [20] -100x00000b60 - 0x00000b63 (0x4) IX[B] [21] -100x00000960 - 0x00000967 (0x8) IX[B] [22] -100x00000be0 - 0x00000be3 (0x4) IX[B] [23] -100x000009e0 - 0x000009e7 (0x8) IX[B] [24] -100x0000d800 - 0x0000d80f (0x10) IX[B] [25] -100x00000b70 - 0x00000b73 (0x4) IX[B] [26] -100x00000970 - 0x00000977 (0x8) IX[B] [27] -100x00000bf0 - 0x00000bf3 (0x4) IX[B] [28] -100x000009f0 - 0x000009f7 (0x8) IX[B] [29] -100x0000f000 - 0x0000f00f (0x10) IX[B] [30] -100x0000e000 - 0x0000e0ff (0x100) IX[B] [31] -100x0000dc00 - 0x0000dcff (0x100) IX[B] [32] -100x00004c40 - 0x00004c7f (0x40) IX[B] [33] -100x00004c00 - 0x00004c3f (0x40) IX[B] [34] -100x0000e400 - 0x0000e41f (0x20) IX[B] (II) resource ranges after probing: [0] -100x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -100x000f0000 - 0x000fffff (0x10000) MX[B] [2] -100x000c0000 - 0x000effff (0x30000) MX[B] [3] -100x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -100xd0001000 - 0xd00017ff (0x800) MX[B] [5] -100xd0000000 - 0xd00003ff (0x400) MX[B] [6] -100xd0100000 - 0xd0100fff (0x1000) MX[B] [7] -100xd0101000 - 0xd0101fff (0x1000) MX[B] [8] -100xd0102000 - 0xd0102fff (0x1000) MX[B] [9] -100xd0103000 - 0xd0103fff (0x1000) MX[B] [10] -100xd0105000 - 0xd01050ff (0x100) MX[B] [11] -100xd0104000 - 0xd0104fff (0x1000) MX[B] [12] -100xc1000000 - 0xc1ffffff (0x1000000) MX[B](B) [13] -100xb0000000 - 0xbfffffff (0x10000000) MX[B](B) [14] -100xc0000000 - 0xc0ffffff (0x1000000) MX[B](B) [15] 000x000a0000 - 0x000affff (0x10000) MS[B] [16] 000x000b0000 - 0x000b7fff (0x8000) MS[B] [17] 000x000b8000 - 0x000bffff (0x8000) MS[B] [18] -100x0000ffff - 0x0000ffff (0x1) IX[B] [19] -100x00000000 - 0x000000ff (0x100) IX[B] [20] -100x0000a000 - 0x0000a07f (0x80) IX[B] [21] -100x0000b000 - 0x0000b007 (0x8) IX[B] [22] -100x0000c400 - 0x0000c40f (0x10) IX[B] [23] -100x00000b60 - 0x00000b63 (0x4) IX[B] [24] -100x00000960 - 0x00000967 (0x8) IX[B] [25] -100x00000be0 - 0x00000be3 (0x4) IX[B] [26] -100x000009e0 - 0x000009e7 (0x8) IX[B] [27] -100x0000d800 - 0x0000d80f (0x10) IX[B] [28] -100x00000b70 - 0x00000b73 (0x4) IX[B] [29] -100x00000970 - 0x00000977 (0x8) IX[B] [30] -100x00000bf0 - 0x00000bf3 (0x4) IX[B] [31] -100x000009f0 - 0x000009f7 (0x8) IX[B] [32] -100x0000f000 - 0x0000f00f (0x10) IX[B] [33] -100x0000e000 - 0x0000e0ff (0x100) IX[B] [34] -100x0000dc00 - 0x0000dcff (0x100) IX[B] [35] -100x00004c40 - 0x00004c7f (0x40) IX[B] [36] -100x00004c00 - 0x00004c3f (0x40) IX[B] [37] -100x0000e400 - 0x0000e41f (0x20) IX[B] [38] 000x000003b0 - 0x000003bb (0xc) IS[B] [39] 000x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(0): Option "AddARGBGLXVisuals" "true" (**) NVIDIA(0): Enabling RENDER acceleration (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is (II) NVIDIA(0): enabled. (II) NVIDIA(0): NVIDIA GPU GeForce 6600 GT at PCI:1:0:0 (GPU-0) (--) NVIDIA(0): Memory: 262144 kBytes (--) NVIDIA(0): VideoBIOS: 05.43.02.75.00 (II) NVIDIA(0): Detected PCI Express Link width: 16X (--) NVIDIA(0): Interlaced video modes are supported on this GPU (--) NVIDIA(0): Connected display device(s) on GeForce 6600 GT at PCI:1:0:0: (--) NVIDIA(0): Sony CPD-E100P (CRT-0) (--) NVIDIA(0): NVIDIA TV Encoder (TV-0) (--) NVIDIA(0): Sony CPD-E100P (CRT-0): 400.0 MHz maximum pixel clock (--) NVIDIA(0): NVIDIA TV Encoder (TV-0): 400.0 MHz maximum pixel clock (--) NVIDIA(0): TV encoder: NVIDIA (II) NVIDIA(0): Assigned Display Device: CRT-0 (II) NVIDIA(0): Validated modes: (II) NVIDIA(0): "1024x768" (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768 (--) NVIDIA(0): DPI set to (92, 88); computed from "UseEdidDpi" X config (--) NVIDIA(0): option (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 000xc1000000 - 0xc1ffffff (0x1000000) MX[B] [1] 000xb0000000 - 0xbfffffff (0x10000000) MX[B] [2] 000xc0000000 - 0xc0ffffff (0x1000000) MX[B] [3] -100x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [4] -100x000f0000 - 0x000fffff (0x10000) MX[B] [5] -100x000c0000 - 0x000effff (0x30000) MX[B] [6] -100x00000000 - 0x0009ffff (0xa0000) MX[B] [7] -100xd0001000 - 0xd00017ff (0x800) MX[B] [8] -100xd0000000 - 0xd00003ff (0x400) MX[B] [9] -100xd0100000 - 0xd0100fff (0x1000) MX[B] [10] -100xd0101000 - 0xd0101fff (0x1000) MX[B] [11] -100xd0102000 - 0xd0102fff (0x1000) MX[B] [12] -100xd0103000 - 0xd0103fff (0x1000) MX[B] [13] -100xd0105000 - 0xd01050ff (0x100) MX[B] [14] -100xd0104000 - 0xd0104fff (0x1000) MX[B] [15] -100xc1000000 - 0xc1ffffff (0x1000000) MX[B](B) [16] -100xb0000000 - 0xbfffffff (0x10000000) MX[B](B) [17] -100xc0000000 - 0xc0ffffff (0x1000000) MX[B](B) [18] 000x000a0000 - 0x000affff (0x10000) MS[B](OprD) [19] 000x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [20] 000x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [21] -100x0000ffff - 0x0000ffff (0x1) IX[B] [22] -100x00000000 - 0x000000ff (0x100) IX[B] [23] -100x0000a000 - 0x0000a07f (0x80) IX[B] [24] -100x0000b000 - 0x0000b007 (0x8) IX[B] [25] -100x0000c400 - 0x0000c40f (0x10) IX[B] [26] -100x00000b60 - 0x00000b63 (0x4) IX[B] [27] -100x00000960 - 0x00000967 (0x8) IX[B] [28] -100x00000be0 - 0x00000be3 (0x4) IX[B] [29] -100x000009e0 - 0x000009e7 (0x8) IX[B] [30] -100x0000d800 - 0x0000d80f (0x10) IX[B] [31] -100x00000b70 - 0x00000b73 (0x4) IX[B] [32] -100x00000970 - 0x00000977 (0x8) IX[B] [33] -100x00000bf0 - 0x00000bf3 (0x4) IX[B] [34] -100x000009f0 - 0x000009f7 (0x8) IX[B] [35] -100x0000f000 - 0x0000f00f (0x10) IX[B] [36] -100x0000e000 - 0x0000e0ff (0x100) IX[B] [37] -100x0000dc00 - 0x0000dcff (0x100) IX[B] [38] -100x00004c40 - 0x00004c7f (0x40) IX[B] [39] -100x00004c00 - 0x00004c3f (0x40) IX[B] [40] -100x0000e400 - 0x0000e41f (0x20) IX[B] [41] 000x000003b0 - 0x000003bb (0xc) IS[B](OprU) [42] 000x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) NVIDIA(0): Setting mode "1024x768" (II) Loading extension NV-GLX (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture (==) NVIDIA(0): Backing store disabled (==) NVIDIA(0): Silken mouse enabled (II) Loading extension NV-CONTROL (==) RandR enabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (II) Initializing extension GLX (**) Option "Protocol" "auto" (**) Mouse0: Device: "/dev/input/mice" (**) Mouse0: Protocol: "auto" (**) Option "CorePointer" (**) Mouse0: Core Pointer (**) Option "Device" "/dev/input/mice" (**) Option "Buttons" "5" (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50 (**) Option "ZAxisMapping" "4 5" (**) Mouse0: ZAxisMapping: buttons 4 and 5 (**) Mouse0: Buttons: 9 (**) Option "CoreKeyboard" (**) Keyboard0: Core Keyboard (**) Option "Protocol" "standard" (**) Keyboard0: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Keyboard0: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) Keyboard0: XkbModel: "pc105" (**) Option "XkbLayout" "us,ru(winkeys),ua(winkeys)" (**) Keyboard0: XkbLayout: "us,ru(winkeys),ua(winkeys)" (**) Option "XkbOptions" "grp:alt_shift_toggle, grp_led:scroll" (**) Keyboard0: XkbOptions: "grp:alt_shift_toggle, grp_led:scroll" (**) Option "CustomKeycodes" "off" (**) Keyboard0: CustomKeycodes disabled (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) xkb_keycodes { include "xfree86+aliases(qwerty)" }; xkb_types { include "complete" }; xkb_compatibility { include "complete+ledscroll(group_lock)" }; xkb_symbols { include "pc(pc105)+us+ru(winkeys):2+ua(winkeys):3+group(alt_shift_toggle)" }; xkb_geometry { include "pc(pc105)" }; (--) Mouse0: PnP-detected protocol: "ExplorerPS/2" (II) Mouse0: ps2EnableDataReporting: succeeded (II) NVIDIA(0): Setting mode "1024x768_70" (II) NVIDIA(0): Setting mode "1024x768" FreeFontPath: FPE "/usr/share/fonts/misc/" refcount is 2, should be 1; fixing.

[b]KDM

Код:

******************************************************************************** Note that your system uses syslog. All of kdm's internally generated messages (i.e., not from libraries and external programs/scripts it uses) go to the daemon.* syslog facility; check your syslog configuration to find out to which file(s) it is logged. PAM logs messages related to authentication to authpriv.*. ******************************************************************************** X Window System Version 7.1.1 Release Date: 12 May 2006 X Protocol Version 11, Revision 0, Release 7.1.1 Build Operating System: UNKNOWN Current Operating System: Linux localhost 2.6.18-gentoo-r6 #2 PREEMPT Mon Jan 1 14:44:38 EET 2007 x86_64 Build Date: 01 January 2007 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 3 02:10:18 2007 (==) Using config file: "/etc/X11/xorg.conf" xkb_keycodes { include "xfree86+aliases(qwerty)" }; xkb_types { include "complete" }; xkb_compatibility { include "complete+ledscroll(group_lock)" }; xkb_symbols { include "pc(pc104)+us+group(rctrl_toggle)+level3(ralt_switch)" }; xkb_geometry { include "pc(pc104)" }; The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols > Ignoring extra symbols Errors from xkbcomp are not fatal to the X server Link points to "/var/tmp/kdecache-root" FreeFontPath: FPE "/usr/share/fonts/misc/" refcount is 2, should be 1; fixing. X Window System Version 7.1.1 Release Date: 12 May 2006 X Protocol Version 11, Revision 0, Release 7.1.1 Build Operating System: UNKNOWN Current Operating System: Linux localhost 2.6.18-gentoo-r6 #2 PREEMPT Mon Jan 1 14:44:38 EET 2007 x86_64 Build Date: 01 January 2007 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 3 02:14:42 2007 (==) Using config file: "/etc/X11/xorg.conf" xkb_keycodes { include "xfree86+aliases(qwerty)" }; xkb_types { include "complete" }; xkb_compatibility { include "complete+ledscroll(group_lock)" }; xkb_symbols { include "pc(pc104)+us+group(rctrl_toggle)+level3(ralt_switch)" }; xkb_geometry { include "pc(pc104)" }; The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols > Ignoring extra symbols Errors from xkbcomp are not fatal to the X server Link points to "/var/tmp/kdecache-root" FreeFontPath: FPE "/usr/share/fonts/misc/" refcount is 2, should be 1; fixing. X Window System Version 7.1.1 Release Date: 12 May 2006 X Protocol Version 11, Revision 0, Release 7.1.1 Build Operating System: UNKNOWN Current Operating System: Linux localhost 2.6.18-gentoo-r6 #2 PREEMPT Mon Jan 1 14:44:38 EET 2007 x86_64 Build Date: 01 January 2007 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.93.log", Time: Wed Jan 3 02:27:13 2007 (==) Using config file: "/etc/X11/xorg.conf" xkb_keycodes { include "xfree86+aliases(qwerty)" }; xkb_types { include "complete" }; xkb_compatibility { include "complete+ledscroll(group_lock)" }; xkb_symbols { include "pc(pc104)+us+group(rctrl_toggle)+level3(ralt_switch)" }; xkb_geometry { include "pc(pc104)" }; The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols > Ignoring extra symbols Errors from xkbcomp are not fatal to the X server xkb_types { include "%" }; xkb_compatibility { include "%" }; xkb_symbols { include "%" }; xkb_geometry { include "%" }; The XKEYBOARD keymap compiler (xkbcomp) reports: > Error: Missing KeyNames section in a Keymap file > Description of Keymap not compiled Errors from xkbcomp are not fatal to the X server (EE) Error loading keymap /usr/share/X11/xkb/compiled/server-93.xkm Could not init font path element /usr/share/fonts/TTF, removing from list! Link points to "/var/tmp/kdecache-root" FreeFontPath: FPE "/usr/share/fonts/misc" refcount is 2, should be 1; fixing. xkb_types { include "%" }; xkb_compatibility { include "%" }; xkb_symbols { include "%" }; xkb_geometry { include "%" }; The XKEYBOARD keymap compiler (xkbcomp) reports: > Error: Missing KeyNames section in a Keymap file > Description of Keymap not compiled Errors from xkbcomp are not fatal to the X server (EE) Error loading keymap /usr/share/X11/xkb/compiled/server-93.xkm Could not init font path element /usr/share/fonts/TTF, removing from list! FreeFontPath: FPE "/usr/share/fonts/misc" refcount is 2, should be 1; fixing. FreeFontPath: FPE "/usr/share/fonts/misc/" refcount is 2, should be 1; fixing. X Window System Version 7.1.1 Release Date: 12 May 2006 X Protocol Version 11, Revision 0, Release 7.1.1 Build Operating System: UNKNOWN Current Operating System: Linux localhost 2.6.18-gentoo-r6 #2 PREEMPT Mon Jan 1 14:44:38 EET 2007 x86_64 Build Date: 01 January 2007 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 3 15:32:44 2007 (==) Using config file: "/etc/X11/xorg.conf" xkb_keycodes { include "xfree86+aliases(qwerty)" }; xkb_types { include "complete" }; xkb_compatibility { include "complete+ledscroll(group_lock)" }; xkb_symbols { include "pc(pc105)+us+ua(winkeys):2+group(rctrl_toggle)+level3(ralt_switch)" }; xkb_geometry { include "pc(pc105)" }; The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols > Ignoring extra symbols Errors from xkbcomp are not fatal to the X server Link points to "/var/tmp/kdecache-root" FreeFontPath: FPE "/usr/share/fonts/misc" refcount is 2, should be 1; fixing. xkb_keycodes { include "xfree86+aliases(qwerty)" }; xkb_types { include "complete" }; xkb_compatibility { include "complete+ledscroll(group_lock)" }; xkb_symbols { include "pc(pc105)+us+ua(winkeys):2+group(rctrl_toggle)+level3(ralt_switch)" }; xkb_geometry { include "pc(pc105)" }; The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols > Ignoring extra symbols Errors from xkbcomp are not fatal to the X server Link points to "/var/tmp/kdecache-root" xkb_keycodes { include "xfree86+aliases(qwerty)" }; xkb_types { include "complete" }; xkb_compatibility { include "complete+ledscroll(group_lock)" }; xkb_symbols { include "pc(pc105)+us+group(rctrl_toggle)+level3(ralt_switch)" }; xkb_geometry { include "pc(pc105)" }; The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols > Ignoring extra symbols Errors from xkbcomp are not fatal to the X server xkb_keycodes { include "xfree86+aliases(qwerty)" }; xkb_types { include "complete" }; xkb_compatibility { include "complete+ledscroll(group_lock)" }; xkb_symbols { include "pc(pc105)+us+ru(winkeys):2+group(rctrl_toggle)+level3(ralt_switch)" }; xkb_geometry { include "pc(pc105)" }; The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols > Ignoring extra symbols Errors from xkbcomp are not fatal to the X server xkb_keycodes { include "xfree86+aliases(qwerty)" }; xkb_types { include "complete" }; xkb_compatibility { include "complete+ledscroll(group_lock)" }; xkb_symbols { include "pc(pc105)+us+ua(winkeys):2+group(rctrl_toggle)+level3(ralt_switch)" }; xkb_geometry { include "pc(pc105)" }; The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols > Ignoring extra symbols Errors from xkbcomp are not fatal to the X server FreeFontPath: FPE "/usr/share/fonts/misc" refcount is 2, should be 1; fixing. X Window System Version 7.1.1 Release Date: 12 May 2006 X Protocol Version 11, Revision 0, Release 7.1.1 Build Operating System: UNKNOWN Current Operating System: Linux localhost 2.6.18-gentoo-r6 #2 PREEMPT Mon Jan 1 14:44:38 EET 2007 x86_64 Build Date: 01 January 2007 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 3 16:01:26 2007 (==) Using config file: "/etc/X11/xorg.conf" xkb_keycodes { include "xfree86+aliases(qwerty)" }; xkb_types { include "complete" }; xkb_compatibility { include "complete+ledscroll(group_lock)" }; xkb_symbols { include "pc(pc105)+us+ua(winkeys):2+group(rctrl_toggle)+level3(ralt_switch)" }; xkb_geometry { include "pc(pc105)" }; The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols > Ignoring extra symbols Errors from xkbcomp are not fatal to the X server FreeFontPath: FPE "/usr/share/fonts/misc" refcount is 2, should be 1; fixing.

xorg.conf

Код:

Section "ServerLayout" Identifier "X.org Configured" Screen"Screen0" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" RgbPath "/usr/share/X11/rgb" ModulePath "/usr/lib64/xorg/modules" FontPath "/usr/share/fonts/misc/" FontPath "/usr/share/fonts/TTF/" FontPath "/usr/share/fonts/OTF" FontPath "/usr/share/fonts/Type1/" FontPath "/usr/share/fonts/CID/" FontPath "/usr/share/fonts/100dpi/" FontPath "/usr/share/fonts/75dpi/" EndSection Section "Module" Load "glx" Load "extmod" Load "wfb" Load "xtrap" Load "record" Load "dbe" Load "dri" Load "freetype" Load "type1" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option"AutoRepeat" "500 30" Option "XkbModel" "pc105" Option"XkbLayout" "us,ru(winkeys),ua(winkeys)" Option"XkbOptions" "grp:alt_shift_toggle, grp_led:scroll" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "Buttons" "5" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Sony" ModelName "Multiscan E100" EndSection Section "Device" Identifier "Card0" Driver "nvidia" VendorName "nVidia Corporation" BoardName "NV43 [GeForce 6600 GT]" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" Option "AddARGBGLXVisuals" "true" DefaultDepth24 SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Modes "1024x768" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Enable" Option "RENDER" "Enable" EndSection

[Виталмий]

MAA вот

[vicpo]

Всем доброго времени суток у меня проблема beryl-settings не стартует выдает следуещее
beryl-settings: error while loading shared libraries: libberylsettings.so.0: cannot open shared object file No such file or directory

Кто нибудь может сказать где и что искать?

[Виталмий]

Всем доброго времени суток у меня проблема beryl-settings не стартует выдает следуещее
beryl-settings: error while loading shared libraries: libberylsettings.so.0: cannot open shared object file No such file or directory

Кто нибудь может сказать где и что искать?

а вы устанавливали beryl-settings?

[vicpo]

beryl-core-0.1.4
beryl-dbus-0.1.4
beryl-manager-0.1.4
beryl-mesa-0.1.4
beryl-settings-0.1.4
emerald-0.1.4
emerald-themes-0.1.4
вот всё что установил beryl работает а вот настроить я его не могу

[Виталмий]

у меня:

Код: Выделить всё

$ ls -l /usr/lib | grep libberylsettings
-rw-r--r--  1 root root   62072 Янв  3 16:09 libberylsettings.a
-rw-r--r--  1 root root     849 Янв  3 16:09 libberylsettings.la
lrwxrwxrwx  1 root root      25 Янв  3 16:09 libberylsettings.so -> libberylsettings.so.0.0.0
lrwxrwxrwx  1 root root      25 Янв  3 16:09 libberylsettings.so.0 -> libberylsettings.so.0.0.0
-rwxr-xr-x  1 root root   51824 Янв  3 16:09 libberylsettings.so.0.0.0

[vicpo]

у меня:

Код: Выделить всё

$ ls -l /usr/lib | grep libberylsettings
-rw-r--r--  1 root root   62072 Янв  3 16:09 libberylsettings.a
-rw-r--r--  1 root root     849 Янв  3 16:09 libberylsettings.la
lrwxrwxrwx  1 root root      25 Янв  3 16:09 libberylsettings.so -> libberylsettings.so.0.0.0
lrwxrwxrwx  1 root root      25 Янв  3 16:09 libberylsettings.so.0 -> libberylsettings.so.0.0.0
-rwxr-xr-x  1 root root   51824 Янв  3 16:09 libberylsettings.so.0.0.0

всё разобрался в чем был косяк, спасибо.

[Catar]

Gentoo; kernel 2.6.19; beryl-0.1.4
при выходе в какую-нибудь консоль по ctrl-alt-Fx и возвращению обратно в иксы система подвисает. Именно подвисает (то есть ctrl-alt-backspace не помогает)...

[kes]

Catar
Аналогичная проблема.