Модератор: Модераторы разделов
U001 писал(а): ↑31.08.2009 14:221)Прописать в xorg.conf
Код: Выделить всё
Option "AllowEmptyInput" "false" Option "AutoAddDevices" "false" Option "AutoEnableDevices" "false"
что будет спопсобствовать "отключению" hal
Skaarj писал(а): ↑01.09.2009 19:11Код: Выделить всё
Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "1280x1024" "1024x768" "800x600" EndSubSection EndSection
Skaarj писал(а): ↑01.09.2009 19:35U001 писал(а): ↑31.08.2009 14:221)Прописать в xorg.conf
Код: Выделить всё
Option "AllowEmptyInput" "false" Option "AutoAddDevices" "false" Option "AutoEnableDevices" "false"
что будет спопсобствовать "отключению" hal
Спасибо, так заработало. А зачем нужны все эти заморочки с HAL'ом, когда на это есть конфиги?
Usage: makepkg package_name.tgz
(or: package_name.tbz, package_name.tlz, package_name.txz)
root@toshiba: ~$ iwconfig eth1 essid KR1 key s:<pass>
root@toshiba: ~$ dhclient eth1
Internet Systems Consortium DHCP Client V3.1.2p1
Copyright 2004-2009 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
Listening on LPF/eth1/00:02:2d:bb:0c:f2
Sending on LPF/eth1/00:02:2d:bb:0c:f2
Sending on Socket/fallback
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 3
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 3
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 5
^C
(asper писал(а): ↑13.09.2009 19:05Код: Выделить всё
Section "ServerFlags" Option "DontZap" "off" EndSection
Код: Выделить всё
...
Option "AllowEmptyInput" "False"
Option "AutoAddDevices" "False"
Option "AutoEnableDevices" "False"
...
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "4 5 6 7"
EndSectionКод: Выделить всё
...
(**) Option "Protocol" "auto"
(**) Option "Device" "/dev/mouse"
(II) Mouse0: Setting mouse protocol to "PS/2"
(**) Mouse0: Device: "/dev/mouse"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/mouse"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Mouse0: (accel) keeping acceleration scheme 1
(**) Mouse0: (accel) filter chain progression: 2.00
(**) Mouse0: (accel) filter stage 0: 20.00 ms
(**) Mouse0: (accel) set acceleration profile 0
(II) Mouse0: Setting mouse protocol to "PS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
...
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device USB OpticalWheel Mouse
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) 3rd Button detected: disabling emulate3Button
(II) config/hal: Adding input device USB OpticalWheel Mouse
(EE) config/hal: NewInputDeviceRequest failed (8)
Эти архивы открываются последней версией 7-Zip (xz это формат LZMA 2).
А более удобней поставить плагин в open source версию Far Manager 2 Unicode и заходить как в папки по Enter.
Эффекты не поддерживаются в вашей системе.
Required X extensions(XComposite and XDamage) are not available.
Код: Выделить всё
Section "Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier "My Monitor"
HorizSync 31.0 - 50.0
VertRefresh 40.0 - 90.0
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Seiko"
HorizSync 30.0 - 75.0
VertRefresh 60.0
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "LG M2362D"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 75.0
EndSection
Section "Device"
#VideoRam 4096
# Insert Clocks lines here if appropriate
Identifier "VESA Framebuffer"
Driver "nvidia"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9200M GS"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9200M GS"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
# If your card can handle it, a higher default color depth (like 24 or 32)
# is highly recommended.
# DefaultDepth 8
# DefaultDepth 16
# DefaultDepth 32
# "1024x768" is also a conservative usable default resolution. If you
# have a better monitor, feel free to try resolutions such as
# "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your
# card/monitor can produce)
# Removed Option "metamodes" "CRT: nvidia-auto-select +0+0"
# Removed Option "metamodes" "CRT: 1280x1024 +0+0"
Identifier "Screen 1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "AllowGLXWithComposite" "True"
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "CRT: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
# Removed Option "TwinView" "0"
# Removed Option "metamodes" "DFP: 1280x800 +0+0; DFP: 1024x768 +0+0; DFP: 800x600 +0+0; DFP: 640x480 +0+0"
# Removed Option "TwinView" "1"
# Removed Option "metamodes" "DFP: 1024x768 +0+0; DFP: 800x600 +0+0; DFP: 640x480 +0+0"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP: 1280x800 +0+0; DFP: 800x600 +0+0; DFP: 640x480 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection