Купил тюнер а звука нет? (Помогите разобраться...)

[static2005]

Всем добрый вечер. Вот приобрел тв-тюнер ComproPVR+fm на чипе saa7134, под виндой все заработало с полоборота- пульт,звук и изображение,
все отлично, но под линуксом (я юзаю SuSE10) есть проблема: изображение класс но нет звука и пульт не работает, не знаю не могу
определить номер tuner=?,а теперь по порядку: Файлы конфигурации ниже,для просмотра тв использую tvtime (xawtv и kdetv плюются и система
виснет глухо до самаго reset), аудиокабель из тюнера вставлен в лайн ин компа - АС97встроенный,пробовал и в микрофон-настройки звука и
чувствительности микрофона выставлены на максимум, к тюнеру подведен кабель спутникового тв- общий в подъезде, в настройках tvtime
выбран видеорежим PAL- регион China Broadcast из-за лучшего изображения, -Россию пробовал,но тоже нет звука, стандарт звука PAL-DK Mono,
в источнике входа видеосигнала указан Television. Вот и вроде изложил проблему, помогите пожалуйста, я и в гугле рылся и вот все чего
нарыл, может хотябы со звуком поможите, я за пульт уже и не прошу, спасибо- Был рад поделиться очень жду совета - просто рядом некого
спросить,может кто глянет в каком файле чего надо мне подправить?
-----------------------------------------------------------------------------------------------------------------------------------------
по команде dmesg выдает:

Linux version 2.6.13-15-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Sep 13 14:56:15 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
On node 0 totalpages: 65520
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61424 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 IntelR ) @ 0x000f6510
ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000
ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: local apic disabled
Allocating PCI resources starting at 10000000 (gap: 10000000:efb00000)
Built 1 zonelists
Kernel command line: root=/dev/hda7 vga=0x31a selinux=0 resume=/dev/hda6 splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 735.090 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 253904k/262080k available (2028k kernel code, 7516k reserved, 700k data, 204k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1471.43 BogoMIPS (lpj=2942860)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: Intel Pentium III (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 1697k freed
ACPI: Looking for DSDT in initrd... not found!
not found!
ACPI: setting ELCR to 0200 (from 0a20)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb190, last bus=2
PCI: Using configuration type 1
ACPI: Subsystem revision 20050408
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Linux Plug and Play Support v0.97 © Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
pnp: 00:01: ioport range 0x400-0x4bf could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: c000-cfff
MEM window: ec000000-edffffff
PREFETCH window: e0000000-e7ffffff
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: ee000000-ee0fffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:1e.0 to 64
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1147127057.284:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xe0000000, mapped to 0xd0880000, using 10240k, total 32768k
vesafb: mode is 1280x1024x16, linelength=2560, pages=11
vesafb: protected mode interface info at c000:5458
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 112645 bytes,<6>...found (1280x1024, 17839 bytes, v3).
Console: switching to colour frame buffer device 158x59
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
mice: PS/2 mouse device common for all mice
input: PC Speaker
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.38
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Using IPI Shortcut mode
ACPI wakeup devices:
SLPB PCI0 HUB0 USB0 USB1 MODM
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 204k freed
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 5
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: WDC WD2000JB-00GVA0, ATA DISK drive
hdb: SAMSUNG SV2001H, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 1024KiB
hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 >
hdb: max request size: 128KiB
hdb: 39179952 sectors (20060 MB) w/2048KiB Cache, CHS=38869/16/63, UDMA(100)
hdb: cache flushes supported
hdb: hdb1 hdb2 hdb3 < hdb5 > hdb4
Probing IDE interface ide1...
hdc: ASUS CRW-5232AS, ATAPI CD/DVD-ROM drive
hdd: TSSTcorpCD/DVDW TS-H552U, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: CPU0 (power states: C1[C1])
ACPI: Processor [CPU0] (supports 2 throttling states)
hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
ACPI: Thermal Zone [THRM] (41 C)
ACPI: Fan [FAN] (on)
Attempting manual resume
swsusp: Suspend partition has wrong signature?
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver 2.1.23 [Flags: R/W MODULE].
NTFS volume version 3.1.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
lp0: using parport0 (interrupt-driven).
Adding 546168k swap on /dev/hda6. Priority:-1 extents:1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Linux agpgart interface v0.101 © Dave Jones
agpgart: Detected an Intel i815 Chipset.
agpgart: AGP aperture is 64M @ 0xe8000000
hw_random: RNG not detected
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1f.5 to 64
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: UHCI Host Controller
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1f.2: irq 11, io base 0x0000d000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNK1] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci_hcd 0000:00:1f.4: UHCI Host Controller
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1f.4: irq 9, io base 0x0000d800
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-1: new low speed USB device using uhci_hcd and address 2
intel8x0_measure_ac97_clock: measured 54781 usecs
intel8x0: clocking to 48000
Linux video capture interface: v1.00
saa7130/34: v4l2 driver version 0.2.14 loaded
ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
saa7134[0]: found at 0000:02:09.0, rev: 1, irq: 5, latency: 32, mmio: 0xee000000
saa7134[0]: subsystem: 185b:c200, board: Noval Prime TV 7133 [card=34,insmod option]
saa7134[0]: board init: gpio is 4c0001
saa7134[0]: i2c eeprom 00: 5b 18 00 c2 ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
usb 1-2: new full speed USB device using uhci_hcd and address 3
: chip found @ 0xc0 (saa7134[0])
: All bytes are equal. It is not a TEA5767
tuner 1-0060: type set to 9 (Alps HSBH1)
: chip found @ 0xc2 (saa7134[0])
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
usbcore: registered new driver hiddev
hiddev96: USB HID v1.10 Device [American Power Conversion Back-UPS ES 525 FW:851.t2.I USB FW:t2] on usb-0000:00:1f.2-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
NET: Registered protocol family 10
Disabled Privacy Extensions on device c036b920(lo)
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
NET: Registered protocol family 23
IrCOMM protocol (Dag Brattli)
bootsplash: status on console 0 changed to on
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized radeon 1.16.0 20050311 on minor 0:
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
subfs 0.9
tuner 1-0061: tuner type not set
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
subfs: unsuccessful attempt to mount media (256)
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
-----------------------------------------------------------------------------------------------------------------------------------------
по команде lsmod выдает:

Module Size Used by
ppp_deflate 6016 0
zlib_deflate 23960 1 ppp_deflate
bsd_comp 6144 0
ppp_async 10880 1
ppp_generic 28052 7 ppp_deflate,bsd_comp,ppp_async
slhc 7296 1 ppp_generic
hfsplus 75140 0
subfs 7552 1
radeon 75264 1
drm 61844 2 radeon
raw 39456 0
irtty_sir 6016 2
sir_dev 16556 1 irtty_sir
ircomm_tty 23432 0
ircomm 13060 1 ircomm_tty
irda 115000 3 sir_dev,ircomm_tty,ircomm
crc_ccitt 2176 2 ppp_async,irda
snd_pcm_oss 59168 0
snd_mixer_oss 18944 1 snd_pcm_oss
snd_seq 51984 0
snd_seq_device 8588 1 snd_seq
button 7056 0
battery 10244 0
ac 5252 0
ipv6 242752 14
usbhid 43616 2
edd 9824 0
tuner 35112 0
saa7134 109908 0
video_buf 20868 1 saa7134
v4l2_common 5760 1 saa7134
v4l1_compat 13060 1 saa7134
ir_common 8196 1 saa7134
videodev 9088 1 saa7134
uhci_hcd 32016 0
usbcore 112640 5 usbhid,uhci_hcd
snd_intel8x0 33408 0
snd_ac97_codec 90876 1 snd_intel8x0
i2c_i801 8844 0
i2c_core 20368 3 tuner,saa7134,i2c_i801
generic 4484 0 [permanent]
snd_ac97_bus 2432 1 snd_ac97_codec
snd_pcm 93064 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 24452 2 snd_seq,snd_pcm
snd 60420 8 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd
_pcm,snd_timer
soundcore 9184 2 saa7134,snd
snd_page_alloc 10632 2 snd_intel8x0,snd_pcm
intel_agp 22044 1
agpgart 33096 2 drm,intel_agp
shpchp 88676 0
pci_hotplug 26164 1 shpchp
parport_pc 38980 1
lp 11460 0
parport 33864 2 parport_pc,lp
nls_utf8 2048 1
ntfs 182288 1
nls_iso8859_1 4096 3
nls_cp437 5760 3
vfat 12800 3
fat 49692 1 vfat
dm_mod 54972 0
ext3 130440 5
jbd 59940 1 ext3
fan 4996 0
thermal 14472 0
ide_cd 39684 0
cdrom 36896 1 ide_cd
processor 24252 1 thermal
piix 9988 0 [permanent]
ide_disk 17152 12
ide_core 122380 4 generic,ide_cd,piix,ide_disk
-----------------------------------------------------------------------------------------------------------------------------------------

распечатка файла /ect/modprobe.d/sound.YaST2save

# W60f.1mooHvuqz43:82801BA/BAM AC'97 Audio
alias char-major-116 snd
alias snd-card-0 snd_intel8x0
options snd_intel8x0 enable=1 index=0
-----------------------------------------------------------------------------------------------------------------------------------------

распечатка файла /ect/modprobe.d/tv.YaST2save

alias char-major-81 videodev
options i2c-algo-bit bit_test=1
options saa7134 card=34 tuner=9

# YaST configured TV card
# t2XO.SHDiqSt30B9:User-Defined TV Card
alias char-major-81-0 saa7134
alias char-major-81-1 off
alias char-major-81-2 off
alias char-major-81-3 off
-----------------------------------------------------------------------------------------------------------------------------------------

распечатка файла /ect/modprobe.conf

#
# Copyright © 1996-2002 SuSE Linux AG Nuernberg, Germany.
# All rights reserved.
#
# Author: Hubert Mantel <mantel@suse.de>, 1996-2002
#
# Configuration file for loadable modules; used by modprobe
#
# Please don't edit this file. Place your settings into
# /etc/modprobe.conf.local instead.
#
#
########################################################################
# Aliases - specify your hardware
########################################################################

install eth0 /bin/true
install eth1 /bin/true
install tr0 /bin/true
install scsi_hostadapter /bin/true
install fb0 /bin/true

########################################################################
# only used for Mylex or Compaq Raid as module
########################################################################

install block-major-48 /bin/true
install block-major-49 /bin/true
install block-major-72 /bin/true
install block-major-73 /bin/true

########################################################################
# only needed for fifth and sixth IDE adaptor
########################################################################

install block-major-56 /bin/true
install block-major-57 /bin/true

########################################################################
# mouse (for older busmice)
########################################################################

install char-major-10 /bin/true

########################################################################
# If you want to use the new autofs4
########################################################################

alias autofs autofs4

########################################################################
# For parallel port devices, uncomment the following two lines and
# change "frpw" to the protocol type you use
########################################################################

# install paride /sbin/modprobe --ignore-install paride && { /sbin/modprobe --ignore-install frpw; }
# remove paride { /sbin/modprobe -r --ignore-remove frpw; } ; /sbin/modprobe -r --ignore-remove paride

########################################################################
# Options; these are examples; uncomment and modify the lines you need
########################################################################

# options cdu31a cdu31a_port=0x340 cdu31a_irq=0
# options sbpcd sbpcd=0x230,1
# options aztcd aztcd=0x320
# options cm206 cm206=0x340,11
# options gscd gscd=0x340
# options mcd mcd=0x300,11
# options mcdx mcdx=0x300,11
# options optcd optcd=0x340
# options sjcd sjcd_base=0x340
# options sonycd535 sonycd535=0x340
# options isp16 isp16_cdrom_base=0x340 isp16_cdrom_irq=0 isp16_cdrom_dma=0 isp16_cdrom_type=Sanyo

# options ne io=0x300 irq=5

# Use this if you have two cards:
# options ne io=0x300,0x320 irq=5,7

# options tulip options=0
# options 3c59x options=0
# options 3c501 io=0x280 irq=5
# options 3c503 io=0x280 irq=5 xcvr=0
# options 3c505 io=0x300 irq=10
# options 3c507 io=0x300 irq=10
# options 3c509 irq=10
# options at1700 io=0x260 irq=10
# options smc-ultra io=0x200 irq=10
# options wd io=0x300 irq=10
# options smc9194 io=0x200 irq=10 ifport=0
# options e2100 io=0x300 irq=10 mem=0xd0000 xcvr=0
# options depca io=0x200 irq=7
# options ewrk3 io=0x300 irq=10
# options eexpress io=0x300 irq=10
# options hp-plus io=0x300 irq=10
# options hp io=0x300 irq=10
# options hp100 hp100_port=0x380
# options apricot io=0x300 irq=10
# options ac3200 io=0x300 irq=10 mem=0xd0000
# options de620 io=0x378 irq=7 bnc=1
# options ibmtr io=0xa20
# options arcnet io=0x300 irq=10 shmem=0xd0000
# options plip io=0x378 irq=7
# options eepro io=0x260 irq=10 mem=0x6000
# options eth16i io=0x2a0 irq=10
# options fmv18x io=0x220 irq=10
# options ni52 io=0x360 irq=9 memstart=0xd0000 memend=0xd4000
# options bttv pll=1 radio=0 card=0
#options tuner type=0
# options msp3400 once=1 simple=1

# install bttv /sbin/modprobe --ignore-install bttv && { /sbin/modprobe -k tuner; /sbin/modprobe -k msp3400; }
#

install dummy0 /sbin/modprobe -o dummy0 --ignore-install dummy
install dummy1 /sbin/modprobe -o dummy1 --ignore-install dummy
remove dummy0 /sbin/modprobe -r -o dummy0 --ignore-remove dummy
remove dummy1 /sbin/modprobe -r -o dummy1 --ignore-remove dummy

########################################################################
# cipe section
########################################################################

alias cipcb0 cipcb
alias cipcb1 cipcb

options cipcb cipe_debug=0

########################################################################
# block dev aliases
########################################################################

alias block-major-1 rd
alias block-major-2 floppy
install block-major-3 /bin/true
alias block-major-7 loop
alias block-major-8 sd_mod
alias block-major-11 sr_mod
alias block-major-13 xd
alias block-major-15 cdu31a
alias block-major-16 gscd
alias block-major-17 optcd
alias block-major-18 sjcd
alias block-major-20 mcdx
install block-major-22 /bin/true
alias block-major-23 mcd
alias block-major-24 sonycd535
alias block-major-25 sbpcd
alias block-major-26 sbpcd
alias block-major-27 sbpcd
alias block-major-28 sbpcd
alias block-major-29 aztcd
alias block-major-32 cm206
install block-major-33 /bin/true
install block-major-34 /bin/true
# network block device
install block-major-43 /bin/true
alias block-major-45 pd
alias block-major-46 pcd
alias block-major-47 pf
alias block-major-117 evms

########################################################################
# char dev aliases
########################################################################

alias char-major-6 lp
alias char-major-9 st
alias char-major-10-130 softdog
install char-major-10-134 /bin/true
install char-major-10-135 /bin/true
alias char-major-10-175 agpgart
alias char-major-10-181 toshiba
alias char-major-10-250 sonypi
options sonypi minor=250
install char-major-15 /bin/true
alias char-major-19 cyclades
alias char-major-20 cyclades
alias char-major-21 sg
alias char-major-27 ftape
install char-major-29 /bin/true
alias char-major-36 netlink_dev
# alias char-major-43 hisax
# alias char-major-44 hisax
# alias char-major-45 hisax
install char-major-43 /bin/true
install char-major-44 /bin/true
install char-major-45 /bin/true
alias char-major-48 riscom8
alias char-major-49 riscom8
alias char-major-67 coda
alias char-major-75 specialix
alias char-major-76 specialix
alias char-major-81 videodev
install char-major-81-0 /bin/true
install char-major-81-1 /bin/true
install char-major-81-2 /bin/true
install char-major-81-3 /bin/true

alias char-major-83 vtx
options vtx quiet=1

alias char-major-89-* i2c-dev
options i2c-algo-bit bit_test=1
alias char-major-96 pt
alias char-major-97 pg
alias char-major-107 3dfx
alias char-major-109 lvm-mod

# remove this if sound is configured
alias char-major-116 snd
install char-major-116 /bin/true
alias snd-card-0 snd_intel8x0
options snd_intel8x0 enable=1 index=0

########################################################################
# ppp over ethernet
# the kernel 2.2 uses pppox
# the kernel 2.4 uses pppoe
########################################################################

alias char-major-108 ppp_generic
alias char-major-144 pppoe
alias net-pf-24 pppoe

########################################################################
# IrDA
########################################################################

alias char-major-161 ircomm-tty

alias char-major-162 raw

########################################################################
# ISDN
########################################################################
install b1pci /bin/true
install c4 /bin/true
install sc /bin/true
install hisax /bin/true
install hisax_fcpcipnp /bin/true
install hfc4s8s_l1 /bin/true
install hysdn /bin/true
install pcbit /bin/true
install t1pci /bin/true
install divas /bin/true
install fcdsl /bin/true
install fcdsl2 /bin/true
install fcpci /bin/true
install fcpnp /bin/true
install fcdslsl /etc/sysconfig/isdn/scripts/hotplug_pci

########################################################################
# USB
########################################################################

install char-major-166 /bin/true

########################################################################
# Moxa Multiport Serial Boards
########################################################################

alias char-major-172 moxa
alias char-major-173 moxa

# options moxa type=2,,, baseaddr=0xdc000,,, numports=8,,,
alias char-major-174 mxser
alias char-major-175 mxser
# options mxser ioaddr=0x180

#alias char-major-180 usbcore

alias InterMezzo intermezzo
alias char-major-185 intermezzo

alias char-major-188 usbserial

alias char-major-195* nvidia
alias char-major-206 osst
alias char-major-212 /bin/true

alias binfmt-204 binfmt_aout
alias binfmt-263 binfmt_aout
alias binfmt-264 binfmt_aout
alias binfmt-267 binfmt_aout
alias binfmt-0064 binfmt_aout
alias binfmt-0008 binfmt_aout

alias iso9660 isofs
alias tty-ldisc-1 slip
alias tty-ldisc-2 serio
alias tty-ldisc-5 mkiss

# alias tty-ldisc-7 6pack
install tty-ldisc-7 /bin/true

# IrDA
alias tty-ldisc-11 irtty-sir

# alias ax0 mkiss
install ax0 /bin/true
# alias sp0 6pack
install sp0 /bin/true
alias slip0 slip
alias sl0 slip
alias slip1 slip
alias sl1 slip

########################################################################
# the kernel 2.2 uses ppp.o as ppp driver,
# the kernel 2.4 uses ppp_generic.o
########################################################################

alias ppp0 ppp_generic
alias ppp1 ppp_generic
alias tty-ldisc-3 ppp_async

alias plip0 plip
alias plip1 plip

# Tunnel interfaces
alias sit0 ipv6
alias gre0 ip_gre
alias ipip0 ipip

alias ppp-compress-18 ppp_mppe
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate

alias net-pf-1 unix
alias net-pf-3 ax25
# install net-pf-3 /bin/true
alias net-pf-4 ipx
# install net-pf-4 /bin/true
alias net-pf-5 appletalk
# install net-pf-5 /bin/true
alias net-pf-6 netrom
# install net-pf-6 /bin/true
alias net-pf-10 ipv6
# install net-pf-10 /bin/true
alias net-pf-11 rose
# install net-pf-11 /bin/true
alias net-pf-15 af_key
alias net-pf-17 af_packet
alias net-pf-31 bluetooth

alias bt-proto-0 l2cap
alias bt-proto-2 sco
alias bt-proto-3 rfcomm
alias bt-proto-4 bnep

alias md-personality-1 linear
alias md-personality-2 raid0
alias md-personality-3 raid1
alias md-personality-4 raid5
alias md-personality-7 multipath

alias tap0 ethertap
alias tap1 ethertap
alias tap2 ethertap
alias tap3 ethertap
alias tap4 ethertap
alias tap5 ethertap
alias tap6 ethertap
alias tap7 ethertap
alias tap8 ethertap
alias tap9 ethertap
alias tap10 ethertap
alias tap11 ethertap
alias tap12 ethertap
alias tap13 ethertap
alias tap14 ethertap
alias tap15 ethertap

alias xfrm-type-2-50 esp4
alias xfrm-type-2-51 ah4
alias xfrm-type-2-108 ipcomp
alias xfrm-type-10-50 esp6
alias xfrm-type-10-51 ah6
alias xfrm-type-10-108 ipcomp6

# don't try to reset isa-pnp cards on startup
options isa-pnp isapnp_reset=0

# Linux-ABI
install binfmt_misc /sbin/modprobe --ignore-install binfmt_misc && { mount -t binfmt_misc none /proc/sys/fs/binfmt_misc; }
remove binfmt_misc { umount /proc/sys/fs/binfmt_misc; } ; /sbin/modprobe -r --ignore-remove binfmt_misc

# Bluetooth
alias bt-proto-5 cmtp
alias bt-proto-6 hidp

# Load lp after parport
install parport /sbin/modprobe -i parport && /sbin/modprobe lp

# end of common part for modprobe.conf
# begin of i386 part for modprobe.conf

alias char-major-4 serial
alias char-major-5 serial

alias parport_lowlevel parport_pc
# options parport_pc io=0x378 irq=none,none
# If you have multiple parallel ports, specify them this way:
# options parport_pc io=0x378,0x278 irq=none,none

# Linux ACP modem (Mwave)
alias char-major-10-219 mwave
# options mwave dspirq=10 dspio=0x130 uartirq=3 uartio=0x2f8

# nVidia nforce chipset (network + audio)
#alias eth0 nvnet
#alias sound-slot-1 nvaudio
#alias usb-interface usb-ohci

# IBM thinkpad tpctl
# see /usr/share/doc/packages/tpctl/
alias char-major-10-170 thinkpad
# options thinkpad enable_smapi=0

# Linux-ABI
alias char-major-30 abi-ibcs
alias binfmt-0004 binfmt_coff
alias binfmt-332 abi-ibcs
alias binfmt-518 abi-ibcs
alias binfmt-002c abi-ibcs
alias personality-1 abi-ibcs
alias personality-2 abi-ibcs
alias personality-3 abi-sco
alias personality-4 abi-wyse
alias personality-5 abi-ibcs
alias personality-7 abi-ibcs
alias personality-13 abi-solaris
alias personality-14 abi-uw7

# required for DRI support on SiS chips
options sisfb mode=none mem=12288

# ata_piix can't handle ICH6 in AHCI mode
install ata_piix /sbin/modprobe ahci; /sbin/modprobe --ignore-install ata_piix

# end of i386 part for modprobe.conf
# please keep this at the end and add local modifications to modules.conf.local
include /etc/modprobe.d
include /etc/modprobe.conf.local

[Jinn]

tuner= и card= должны быть в исходниках ядра описаны, в файлах типа tuner.list и card.list. Если всё правильно - звук можно попробовать aumix (не kmix и не gnome-mixer!) подрегулировать.

[Александр]

А модуль tda9887 не нужен разве? Помнится у меня из-за того, что я его не стеми параметрами вставлял (у меня тюнер тоже на saa7134 работает, кстати карта номер 35 ), и видео полный отстой было, и звук ужасно хрипел. Для примера, у меня этот модуль вставляется с такими параметрами:

Код: Выделить всё

tda9887 secam=d port2=0 port1=1

[static2005]

спасибо ребята, с аумиксом все на мамксимум, с параметрами card=35 tuner=?* secam=d и т.д. не помогло может будут еще у кого варианты?
спасибо и с Днем Победы!

[static2005]

Спасибо большое, нашел номера карты и тюнера по вашим предложениям
modprobe card=49 tuner=57 и все заработало, кроме пульта, но это не так важно хотя тоже хотелось-бы подключить, так что тема не закрыта, посоветуйте дальше чего.- lircd -у меня загружен, irda на компорт откликается.

[_Storm]

Все сделал так же, но звука всеравно нет. Карта Lifeview flytv prime30 saa7134. видео показывает прекрасно.

[AlexLin]

вот повезло , а у меня AverMedia 505 studio, ну никак не могу настроить чтоб он его вообще видел, мне система все время говорит что не найдет тв тунер

[virens]

Все сделал так же, но звука всеравно нет. Карта Lifeview flytv prime30 saa7134. видео показывает прекрасно.

Каналы ловит? В цвете? Если да - то воткните в аудиовыход тюнера провод из входа микрофона звуковой платы. В микшере поднять громкость микрофона соответственно. Должно полегчать.

вот повезло , а у меня AverMedia 505 studio, ну никак не могу настроить чтоб он его вообще видел, мне система все время говорит что не найдет тв тунер

Мсьё... телепаты... они на Гаваях.... Понимаете? Вывод вашего dmesg, lspci и uname -a мне отсюда, из Москвы, нифига не виден
Это раз. Потом, есть такая вещь, как документация к вашему ядру Линукс. Прямо на вашем жёстком диске. Гляньте в /usr/src/linux-*.*.*./Documentation/video4linux
там очень может оказаться список поддерживаемых тюнеров. Поищите там свой, если в до гугла далеко идти.

[_Storm]

Все сделал так же, но звука всеравно нет. Карта Lifeview flytv prime30 saa7134. видео показывает прекрасно.

Каналы ловит? В цвете? Если да - то воткните в аудиовыход тюнера провод из входа микрофона звуковой платы. В микшере поднять громкость микрофона соответственно. Должно полегчать.

Уважаемый, я же не совсем кретин, конечно я воткнул все кабели. И во время сканирования каналов на пустых частотах слышно шипение, а как только находит канал звук исчезает сразу.

[virens]

Уважаемый, я же не совсем кретин, конечно я воткнул все кабели. И во время сканирования каналов на пустых частотах слышно шипение, а как только находит канал звук исчезает сразу.

_Storm, вы не обижайтесь - я ничего такого не имел в виду. Просто предложил один из вариантов решения проблемы. Я вот в своё время до этого догадался не сразу
По теме: у меня тоже не все каналы со звуком. Картинка есть, цветная, а звука нет. Иногда он появляется, если проходить по каналам в обратном порядке. Может, это глюк tvtime.

[_Storm]

Уважаемый, я же не совсем кретин, конечно я воткнул все кабели. И во время сканирования каналов на пустых частотах слышно шипение, а как только находит канал звук исчезает сразу.

_Storm, вы не обижайтесь - я ничего такого не имел в виду. Просто предложил один из вариантов решения проблемы. Я вот в своё время до этого догадался не сразу
По теме: у меня тоже не все каналы со звуком. Картинка есть, цветная, а звука нет. Иногда он появляется, если проходить по каналам в обратном порядке. Может, это глюк tvtime.

Я, как не странно, догадался сразу. Но не в этом суть Звука нет на любых каналах как не листай. Это еще глюк XawTV, KdeTV и всего остального что я нашел для общения с тюнером. думаю что дело не в программах, скорее или в железе или в /dev/hands. Как показывает опыт в последнем...

[_Storm]

Фу, разобрался, card №3, tuner любое число меньше 10. Всетаки заработало.

[alen]

Фу, разобрался, card №3, tuner любое число меньше 10. Всетаки заработало.

А у меня такой же тюнер, но ничего не получается все так же нет звука.

[alen]

Я всё таки хотел бы попросить о помощи знатоков, так как очень обидно что у кого-то получается завести такой тюнер, а у меня нет.
Вот мой dmesg:

[ 0.000000] Bootdata ok (command line is root=/dev/sda6 ro quiet splash)
[ 0.000000] Linux version 2.6.15-23-amd64-k8 (buildd@yellow) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Tue May 23 13:51:32 UTC 2006
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001dfb0000 (usable)
[ 0.000000] BIOS-e820: 000000001dfb0000 - 000000001dfc0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001dfc0000 - 000000001dff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001dff0000 - 000000001e000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fa850
[ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x10000521 MSFT 0x00000097) @ 0x000000001dfb0000
[ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x10000521 MSFT 0x00000097) @ 0x000000001dfb0200
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x10000521 MSFT 0x00000097) @ 0x000000001dfb0390
[ 0.000000] ACPI: MCFG (v001 A M I OEMMCFG 0x10000521 MSFT 0x00000097) @ 0x000000001dfb0400
[ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x10000521 MSFT 0x00000097) @ 0x000000001dfc0040
[ 0.000000] ACPI: DSDT (v001 K8N62 K8N62140 0x00000140 INTL 0x02002026) @ 0x0000000000000000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of nodes 1
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000001dfb0000
[ 0.000000] Using 63 for the hash shift.
[ 0.000000] Using node hash shift of 63
[ 0.000000] Bootmem setup node 0 0000000000000000-000000001dfb0000
[ 0.000000] On node 0 totalpages: 120105
[ 0.000000] DMA zone: 3023 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 117082 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages, LIFO batch:0
[ 0.000000] HighMem zone: 0 pages, LIFO batch:0
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:12 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1e000000:e0c00000)
[ 0.000000] Checking aperture...
[ 0.000000] CPU 0: aperture @ 4410000000 size 32 MB
[ 0.000000] Aperture from northbridge cpu 0 too small (32 MB)
[ 0.000000] No AGP bridge found
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] Built 1 zonelists
[ 0.000000] Kernel command line: root=/dev/sda6 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 65536 bytes)
[ 0.000000] time.c: Using 3.579545 MHz PM timer.
[ 0.000000] time.c: Detected 1607.365 MHz processor.
[ 14.186705] Console: colour VGA+ 80x25
[ 14.187230] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 14.187998] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 14.195064] Memory: 472380k/491200k available (2140k kernel code, 18432k reserved, 750k data, 180k init)
[ 14.254816] Calibrating delay using timer specific routine.. 3218.07 BogoMIPS (lpj=1609039)
[ 14.254879] Security Framework v1.0.0 initialized
[ 14.254886] SELinux: Disabled at boot.
[ 14.254911] Mount-cache hash table entries: 256
[ 14.255030] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 14.255033] CPU: L2 Cache: 128K (64 bytes/line)
[ 14.255037] CPU 0(1) -> Node 0 -> Core 0
[ 14.255045] mtrr: v2.0 (20020519)
[ 14.255053] SMP alternatives: switching to UP code
[ 14.255435] checking if image is initramfs... it is
[ 14.938296] Freeing initrd memory: 7094k freed
[ 14.945484] ACPI: Looking for DSDT ... not found!
[ 14.958646] Using local APIC timer interrupts.
[ 15.020858] Detected 12.557 MHz APIC timer.
[ 15.020926] Brought up 1 CPUs
[ 15.020984] time.c: Using PIT/TSC based timekeeping.
[ 15.020987] testing NMI watchdog ... OK.
[ 15.031351] NET: Registered protocol family 16
[ 15.031384] ACPI: bus type pci registered
[ 15.031455] PCI: Using configuration type 1
[ 15.035752] PCI: Using MMCONFIG at e0000000
[ 15.036389] ACPI: Subsystem revision 20051216
[ 15.042046] ACPI: Interpreter enabled
[ 15.042052] ACPI: Using IOAPIC for interrupt routing
[ 15.042642] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 15.042647] PCI: Probing PCI hardware (bus 00)
[ 15.047738] Boot video device is 0000:00:05.0
[ 15.048501] PCI: Transparent bridge - 0000:00:10.0
[ 15.048545] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 15.071486] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 15.072027] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 15.072559] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[ 15.082175] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 15.083579] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[ 15.084240] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 15.084913] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 15.085577] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 15.086237] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[ 15.086896] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[ 15.087541] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *11
[ 15.088196] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[ 15.088861] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11
[ 15.089510] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[ 15.090176] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
[ 15.090828] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
[ 15.091484] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *11
[ 15.092141] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[ 15.092793] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 15.093445] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
[ 15.094113] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
[ 15.094779] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
[ 15.095531] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 15.095665] Linux Plug and Play Support v0.97 © Adam Belay
[ 15.095681] pnp: PnP ACPI init
[ 15.105782] pnp: PnP ACPI: found 17 devices
[ 15.105807] PCI: Using ACPI for IRQ routing
[ 15.105812] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 15.105973] PCI-DMA: Disabling IOMMU.
[ 15.107607] pnp: 00:0e: ioport range 0x290-0x29f has been reserved
[ 15.107808] PCI: Bridge: 0000:00:02.0
[ 15.107811] IO window: disabled.
[ 15.107814] MEM window: disabled.
[ 15.107816] PREFETCH window: disabled.
[ 15.107819] PCI: Bridge: 0000:00:03.0
[ 15.107821] IO window: disabled.
[ 15.107823] MEM window: disabled.
[ 15.107825] PREFETCH window: disabled.
[ 15.107828] PCI: Bridge: 0000:00:04.0
[ 15.107829] IO window: disabled.
[ 15.107832] MEM window: disabled.
[ 15.107834] PREFETCH window: disabled.
[ 15.107836] PCI: Bridge: 0000:00:10.0
[ 15.107838] IO window: disabled.
[ 15.107842] MEM window: faa00000-faafffff
[ 15.107845] PREFETCH window: disabled.
[ 15.107864] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 15.107871] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 15.107876] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 15.107884] PCI: Setting latency timer of device 0000:00:10.0 to 64
[ 15.108134] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
[ 15.108454] audit: initializing netlink socket (disabled)
[ 15.108470] audit(1162708144.923:1): initialized
[ 15.108628] VFS: Disk quotas dquot_6.5.1
[ 15.108651] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 15.108712] Initializing Cryptographic API
[ 15.108716] io scheduler noop registered
[ 15.108724] io scheduler anticipatory registered
[ 15.108732] io scheduler deadline registered
[ 15.108750] io scheduler cfq registered
[ 15.109067] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 15.109072] pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor BIOS
[ 15.109089] assign_interrupt_mode Found MSI capability
[ 15.109124] Allocate Port Service[pcie00]
[ 15.109161] Allocate Port Service[pcie03]
[ 15.109195] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 15.109198] pcie_portdrv_probe->Dev[02fd:10de] has invalid IRQ. Check vendor BIOS
[ 15.109217] assign_interrupt_mode Found MSI capability
[ 15.109235] Allocate Port Service[pcie00]
[ 15.109266] Allocate Port Service[pcie03]
[ 15.109298] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 15.109302] pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS
[ 15.109317] assign_interrupt_mode Found MSI capability
[ 15.109337] Allocate Port Service[pcie00]
[ 15.109368] Allocate Port Service[pcie03]
[ 15.124306] Real Time Clock Driver v1.12
[ 15.124345] Linux agpgart interface v0.101 © Dave Jones
[ 15.124445] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 15.126657] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 15.126818] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 15.126858] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[ 15.126982] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 15.127143] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 15.129311] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 15.129803] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 15.129882] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 15.129886] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 15.130066] mice: PS/2 mouse device common for all mice
[ 15.130457] NET: Registered protocol family 2
[ 15.139920] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 15.140088] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[ 15.140337] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 15.140624] TCP: Hash tables configured (established 16384 bind 16384)
[ 15.140629] TCP reno registered
[ 15.140728] TCP bic registered
[ 15.140737] NET: Registered protocol family 1
[ 15.140745] NET: Registered protocol family 8
[ 15.140748] NET: Registered protocol family 20
[ 15.140925] ACPI wakeup devices:
[ 15.140928] P0P8 P0P9 P0PA PS2K PS2M UAR1 NSMB USB0 USB2 NMAC P0P1 HDAC MC97
[ 15.140935] ACPI: (supports S0 S1 S3 S4 S5)
[ 15.141021] Freeing unused kernel memory: 180k freed
[ 15.151032] input: AT Translated Set 2 keyboard as /class/input/input0
[ 15.195131] vga16fb: initializing
[ 15.195136] vga16fb: mapped to 0xffff8100000a0000
[ 15.378646] Console: switching to colour frame buffer device 80x25
[ 15.378656] fb0: VGA16 VGA frame buffer device
[ 16.400229] Capability LSM initialized
[ 17.321167] SCSI subsystem initialized
[ 17.323423] ACPI: bus type scsi registered
[ 17.323427] libata version 1.20 loaded.
[ 17.325601] sata_nv 0000:00:0e.0: version 0.8
[ 17.326148] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 17.326154] GSI 16 sharing vector 0xD1 and IRQ 16
[ 17.326162] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 209
[ 17.326226] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 17.326304] ata1: SATA max UDMA/133 cmd 0xF80 ctl 0xF02 bmdma 0xE000 irq 209
[ 17.326327] ata2: SATA max UDMA/133 cmd 0xE80 ctl 0xE02 bmdma 0xE008 irq 209
[ 17.681655] ata1: dev 0 cfg 00:427a 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:407f 93:0000
[ 17.681662] ata1: dev 0 ATA-7, max UDMA/133, 312581808 sectors: LBA48
[ 17.682520] sata_get_dev_handle: SATA dev addr=0xe0000, handle=0xffff81001df8d540
[ 17.691776] ata1: dev 0 configured for UDMA/133
[ 17.692574] sata_get_dev_handle: SATA dev addr=0xe0000, handle=0xffff81001df8d540
[ 17.701837] scsi0 : sata_nv
[ 17.903459] ata2: no device found (phy stat 00000000)
[ 17.903465] scsi1 : sata_nv
[ 17.904519] Vendor: ATA Model: WDC WD1600JS-00M Rev: 02.0
[ 17.904531] Type: Direct-Access ANSI SCSI revision: 05
[ 17.907016] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
[ 17.907042] NFORCE-MCP51: chipset revision 161
[ 17.907045] NFORCE-MCP51: not 100% native mode: will probe irqs later
[ 17.907051] NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller
[ 17.907062] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
[ 17.907074] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
[ 17.907083] Probing IDE interface ide0...
[ 17.921817] Driver 'sd' needs updating - please use bus_type methods
[ 17.923093] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[ 17.923111] SCSI device sda: drive cache: write back
[ 17.927036] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[ 17.927054] SCSI device sda: drive cache: write back
[ 17.927061] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 17.982745] sd 0:0:0:0: Attached scsi disk sda
[ 18.426385] Probing IDE interface ide1...
[ 19.098386] hdc: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
[ 19.406518] ide1 at 0x170-0x177,0x376 on irq 15
[ 19.420541] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 19.420552] Uniform CD-ROM driver Revision: 3.20
[ 19.522801] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.48.
[ 19.523794] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[ 19.523802] GSI 17 sharing vector 0xD9 and IRQ 17
[ 19.523810] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 217
[ 19.523817] PCI: Setting latency timer of device 0000:00:14.0 to 64
[ 19.555232] usbcore: registered new driver usbfs
[ 19.555986] usbcore: registered new driver hub
[ 19.557697] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[ 19.558311] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
[ 19.558318] GSI 18 sharing vector 0xE1 and IRQ 18
[ 19.558326] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 21 (level, low) -> IRQ 225
[ 19.558384] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 19.558391] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 19.576909] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
[ 19.576925] ohci_hcd 0000:00:0b.0: irq 225, io mem 0xfebde000
[ 19.630503] hub 1-0:1.0: USB hub found
[ 19.630518] hub 1-0:1.0: 8 ports detected
[ 19.732870] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20
[ 19.732877] GSI 19 sharing vector 0xE9 and IRQ 19
[ 19.732885] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 20 (level, low) -> IRQ 233
[ 19.732946] PCI: Setting latency timer of device 0000:00:0b.1 to 64
[ 19.732953] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 19.732990] ehci_hcd 0000:00:0b.1: debug port 1
[ 19.732994] PCI: cache line size of 64 is not supported by device 0000:00:0b.1
[ 19.733178] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
[ 19.733203] ehci_hcd 0000:00:0b.1: irq 233, io mem 0xfebdfc00
[ 19.733214] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 19.733480] hub 2-0:1.0: USB hub found
[ 19.733492] hub 2-0:1.0: 8 ports detected
[ 20.035456] eth0: forcedeth.c: subsystem: 01849:0269 bound to 0000:00:14.0
[ 20.064750] Probing IDE interface ide0...
[ 20.643994] Attempting manual resume
[ 20.662578] kjournald starting. Commit interval 5 seconds
[ 20.662591] EXT3-fs: mounted filesystem with ordered data mode.
[ 27.940048] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 29.505297] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 29.509254] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 29.852625] nvidia: module license 'NVIDIA' taints kernel.
[ 29.858481] ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 19
[ 29.858489] GSI 20 sharing vector 0x32 and IRQ 20
[ 29.858497] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNEC] -> GSI 19 (level, low) -> IRQ 50
[ 29.858506] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 29.858722] NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-8762 Mon May 15 13:58:14 PDT 2006
[ 30.533236] Linux video capture interface: v1.00
[ 30.840217] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 23
[ 30.840223] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LACI] -> GSI 23 (level, low) -> IRQ 209
[ 30.840297] PCI: Setting latency timer of device 0000:00:10.2 to 64
[ 30.892040] Floppy drive(s): fd0 is 1.44M
[ 30.900673] input: PC Speaker as /class/input/input1
[ 30.912394] FDC 0 is a post-1991 82077
[ 30.917567] parport: PnPBIOS parport detected.
[ 30.917637] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 30.966739] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 30.981487] irda_init()
[ 30.981505] NET: Registered protocol family 23
[ 31.132621] Unable to handle kernel NULL pointer dereference at 0000000000000008 RIP:
[ 31.132628] <ffffffff8015535e>{finish_wait+78}
[ 31.132637] PGD 176a3067 PUD 176a4067 PMD 0
[ 31.132642] Oops: 0002 [1] PREEMPT SMP
[ 31.132645] CPU 0
[ 31.132647] Modules linked in: irtty_sir snd_mpu401 snd_mpu401_uart sir_dev analog psmouse snd_rawmidi snd_seq_device irda saa7134 gameport parport_pc parport serio_raw pcspkr floppy crc_ccitt video_buf v4l2_common v4l1_compat snd_intel8x0 snd_ac97_codec snd_ac97_bus ir_kbd_i2c snd_pcm_oss snd_mixer_oss ir_common snd_pcm snd_timer videodev snd soundcore snd_page_alloc nvidia i2c_core shpchp pci_hotplug sg evdev ext3 jbd ide_generic ehci_hcd ohci_hcd usbcore forcedeth ide_cd cdrom generic sd_mod amd74xx sata_nv libata scsi_mod thermal processor fan capability commoncap vga16fb cfbcopyarea vgastate cfbimgblt cfbfillrect fbcon tileblit font bitblit softcursor
[ 31.132682] Pid: 3239, comm: kIrDAd Tainted: P 2.6.15-23-amd64-k8 #1
[ 31.132686] RIP: 0010:[<ffffffff8015535e>] <ffffffff8015535e>{finish_wait+78}
[ 31.132693] RSP: 0000:ffff810017aa1ef8 EFLAGS: 00010002
[ 31.132697] RAX: 0000000000000000 RBX: ffff810017aa1f30 RCX: 00000000c0000100
[ 31.132700] RDX: 0000000000000000 RSI: 0000000000000202 RDI: ffffffff887d4ac0
[ 31.132705] RBP: ffff810017aa1f18 R08: ffff810017aa0000 R09: 0000000000000000
[ 31.132709] R10: 0000000000000001 R11: 00000000000000c0 R12: ffffffff887d4ac0
[ 31.132714] R13: ffffffff887d46c0 R14: ffffffff8037bba0 R15: 00002aaaaaac4000
[ 31.132718] FS: 00002aaaaadfb6d0(0000) GS:ffffffff80446800(0000) knlGS:0000000000000000
[ 31.132722] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 31.132725] CR2: 0000000000000008 CR3: 000000001768a000 CR4: 00000000000006e0
[ 31.132730] Process kIrDAd (pid: 3239, threadinfo ffff810017aa0000, task ffff81001bd16920)
[ 31.132733] Stack: ffff810017905f18 000000000000905e 00002aaaaaac4000 ffffffff887d0a8f
[ 31.132740] 0000000000000000 ffff81001bd16920 ffffffff80138830 0000000000000000
[ 31.132746] 0000000000000000 ffff8100179074c0
[ 31.132750] Call Trace:<ffffffff887d0a8f>{:sir_dev:irda_thread+207} <ffffffff80138830>{default_wake_function+0}
[ 31.132771] <ffffffff80110dfe>{child_rip+8} <ffffffff887d09c0>{:sir_dev:irda_thread+0}
[ 31.132792] <ffffffff80110df6>{child_rip+0}
[ 31.132800]
[ 31.132801] Code: 48 89 42 08 48 89 10 48 89 5b 08 48 89 5d 18 48 8b 1c 24 48
[ 31.132811] RIP <ffffffff8015535e>{finish_wait+78} RSP <ffff810017aa1ef8>
[ 31.132817] CR2: 0000000000000008
[ 31.132820] <6>note: kIrDAd[3239] exited with preempt_count 1
[ 31.153617] intel8x0_measure_ac97_clock: measured 51117 usecs
[ 31.153623] intel8x0: clocking to 46884
[ 31.156403] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18
[ 31.156412] GSI 21 sharing vector 0x3A and IRQ 21
[ 31.156420] ACPI: PCI Interrupt 0000:04:08.0[A] -> Link [LNKA] -> GSI 18 (level, low) -> IRQ 58
[ 31.156430] saa7130[0]: found at 0000:04:08.0, rev: 1, irq: 58, latency: 32, mmio: 0xfaaffc00
[ 31.156438] saa7130[0]: subsystem: 5168:0138, board: LifeView FlyVIDEO2000 [card=3,autodetected]
[ 31.156452] saa7130[0]: board init: gpio is 39000
[ 31.156455] saa7130[0]: there are different flyvideo cards with different tuners
[ 31.156457] saa7130[0]: out there, you might have to use the tuner=<nr> insmod
[ 31.156459] saa7130[0]: option to override the default value.
[ 31.156559] input: saa7134 IR (LifeView FlyVIDEO20 as /class/input/input2
[ 31.229890] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[ 31.256551] ts: Compaq touchscreen protocol output
[ 31.279597] saa7130[0]: i2c eeprom 00: 68 51 38 01 10 28 ff ff ff ff ff ff ff ff ff ff
[ 31.279609] saa7130[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 31.279619] saa7130[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 31.279628] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 31.279636] saa7130[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 31.279645] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 31.279654] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 31.279663] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 31.303596] tuner 0-0061: chip found @ 0xc2 (saa7130[0])
[ 31.303640] tuner 0-0061: type set to 37 (LG PAL (newer TAPC series))
[ 31.305744] saa7130[0]: registered device video0 [v4l2]
[ 31.305775] saa7130[0]: registered device vbi0
[ 31.305801] saa7130[0]: registered device radio0
[ 31.316490] saa7134 ALSA driver for DMA sound loaded
[ 31.316524] saa7130[0]/alsa: saa7130[0] at 0xfaaffc00 irq 58 registered as card -1
[ 31.871227] lp0: using parport0 (interrupt-driven).
[ 31.950769] Adding 634528k swap on /dev/sda8. Priority:-1 extents:1 across:634528k
[ 32.093008] EXT3 FS on sda6, internal journal
[ 32.262054] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[ 32.262059] md: bitmap version 4.39
[ 32.701680] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[ 33.404517] cdrom: open failed.
[ 35.822701] kjournald starting. Commit interval 5 seconds
[ 35.822842] EXT3 FS on sda7, internal journal
[ 35.822847] EXT3-fs: mounted filesystem with ordered data mode.
[ 35.872874] NTFS driver 2.1.25 [Flags: R/O MODULE].
[ 35.930052] NTFS volume version 3.1.
[ 35.994527] NTFS volume version 3.1.
[ 39.277739] ACPI: Power Button (FF) [PWRF]
[ 39.277766] ACPI: Power Button (CM) [PWRB]
[ 39.378688] ibm_acpi: ec object not found
[ 39.401631] pcc_acpi: loading...
[ 39.888909] powernow-k8: Power state transitions not supported
[ 41.288740] ppdev: user-space parallel port driver
[ 44.570984] Bluetooth: Core ver 2.8
[ 44.570992] NET: Registered protocol family 31
[ 44.570994] Bluetooth: HCI device and connection manager initialized
[ 44.571008] Bluetooth: HCI socket layer initialized
[ 44.583802] Bluetooth: L2CAP ver 2.8
[ 44.583808] Bluetooth: L2CAP socket layer initialized
[ 44.597002] Bluetooth: RFCOMM socket layer initialized
[ 44.597024] Bluetooth: RFCOMM TTY layer initialized
[ 44.597027] Bluetooth: RFCOMM ver 1.7
[ 79.740395] NET: Registered protocol family 10
[ 79.740539] lo: Disabled Privacy Extensions
[ 79.740628] IPv6 over IPv4 tunneling driver
[ 102.981079] CSLIP: code copyright 1989 Regents of the University of California
[ 102.985836] PPP generic driver version 2.4.2
[ 110.742669] PPP BSD Compression module registered
[ 110.778437] PPP Deflate Compression module registered

При просмотре ТВ пытался использовать разные программы, во всех изображение показывает нормально, а звука нет, пробовал разные манипуляции с микшерами и card=* tuner=* результат тот же.
Со шнурами все хорошо так как есть ещё windows, там все показывает и поёт отлично.