Ошибка в nvidia.ko

[sasha]

Ставил Gentoo 2006.0 все по мануалу. X-ы работают но как только emerge glx или emerge nvidia-kernel вылезает вот это :Error inserting nvidia (/lib/modules/2.6.16-gentoo-r9/video/nvidia.ko): Unknown symbol in module, or unknown parameter (see dmesg). Попробовал modprobe nvidia, тоже самое только с "FATAL" в начале строки. ??? Может кто сталкивался?
Заранее признателен за внимание.

[fossil]

dmesg в студию

[aLexx programmer]

Такая штука происходит при попытке загрузить в ядро модуль, собраный с другим ядром. Проверь, куда указывает /usr/src/linux.

[ArtSh]

Чаще всего такое происходит если версия ядра, драйвера, и модель карты не совпадает. Попробуйте nvidia-legacy-drivers

[sasha]

Такая штука происходит при попытке загрузить в ядро модуль, собраный с другим ядром. Проверь, куда указывает /usr/src/linux.

# cd /usr/src/
src # ls -l
итого 4
lrwxrwxrwx 1 root root 22 Авг 22 20:15 linux -> linux-2.6.16-gentoo-r9
drwxr-xr-x 20 root root 4096 Сен 1 08:57 linux-2.6.16-gentoo-r9

[serzh-z]

См. "modinfo <путь>/nvidia.ko" и "uname -a"

[sasha]

Чаще всего такое происходит если версия ядра, драйвера, и модель карты не совпадает. Попробуйте nvidia-legacy-drivers

nvidia-legacy-drivers "команда не найдена"

См. "modinfo <путь>/nvidia.ko" и "uname -a"

modinfo /lib/modules/2.6.16-gentoo-r9/video/nvidia.ko
filename: /lib/modules/2.6.16-gentoo-r9/video/nvidia.ko
license: NVIDIA
alias: char-major-195-*
vermagic: 2.6.16-gentoo-r9 SMP PENTIUM4 4KSTACKS gcc-3.4
depends:
alias: pci:v000010DEd*sv*sd*bc03sc00i00*
parm: NVreg_RmLogonRC:int
parm: NVreg_VideoEnhancement:int
parm: NVreg_DevicesConnected:int
parm: NVreg_FlatPanelMode:int
parm: NVreg_ResmanDebugLevel:int
parm: NVreg_Mobile:int
parm: NVreg_SoftEDIDs:int
parm: NVreg_EnableAGPFW:int
parm: NVreg_EnableAGPSBA:int
parm: NVreg_NvAGP:int
parm: NVreg_ReqAGPRate:int
parm: NVreg_EnableALiAGP:int
parm: NVreg_EnableVia4x:int
parm: NVreg_VideoMemoryTypeOverride:int
parm: silence_nvidia_output:int

uname -a
Linux komp 2.6.16-gentoo-r9 #3 SMP Fri Sep 1 08:57:14 GMT 2006 i686 Intel® Pentium® 4 CPU 3.00GHz GenuineIntel GNU/Linux

[serzh-z]

Так все же - а что dmesg показывает после modprobe nvidia? Может драйвер просто не обнаруживает устройство?

[ArtSh]

nvidia-legacy-drivers "команда не найдена"

↑

так и хочется сказать RTFM!
emerge --sync
emerge nvidia-legacy-drivers

Если не поможет попробуйте другую вермию ядра, прочитайте также следующее обсуждение
gentoo.ru

[sasha]

[quote name='serzh-z' post='248553' date='Sep 4 2006, в 18:47']
Так все же - а что dmesg показывает после modprobe nvidia? Может драйвер просто не обнаруживает устройство?
[quote]

modprobe nvidia
FATAL: Error inserting nvidia (/lib/modules/2.6.16-gentoo-r9/video/nvidia.ko): U nknown symbol in module, or unknown parameter (see dmesg)
komp sonic # dmesg
Linux version 2.6.16-gentoo-r9 (root@komp) (gcc version 3.4.6 (Gentoo 3.4.6-r1, ssp-3.4.5-1.0, pie-8.7.9)) #3 SMP Fri Sep 1 08:57:14 GMT 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
found SMP MP-table at 000f56d0
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 126960 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:0
DMI 2.2 present.
ACPI: RSDP (v000 IntelR ) @ 0x000f71d0
ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff7300
ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:3 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:3 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Built 1 zonelists
Kernel command line: root=/dev/hda10 video=vesafb:1024x768-32@80
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0481000 soft=c0479000
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 3000.280 MHz processor.
Using pmtmr for high-res timesource
Speakup v-2.00 CVS: Wed Dec 21 14:36:03 EST 2005 : initialized
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 514636k/524224k available (2477k kernel code, 9060k reserved, 834k data, 216k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6009.46 BogoMIPS (lpj=12018939)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000180 0000441d 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
CPU0: Intel® Pentium® 4 CPU 3.00GHz stepping 04
Booting processor 1/1 eip 2000
CPU 1 irqstacks, hard=c0482000 soft=c047a000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5999.74 BogoMIPS (lpj=11999499)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000180 0000441d 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel® Pentium® 4 CPU 3.00GHz stepping 04
Total of 2 processors activated (12009.21 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=4000
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfbb60, last bus=2
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
Linux Plug and Play Support v0.97 © Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 16 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:0e: ioport range 0x400-0x4bf could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: f8000000-f9ffffff
PREFETCH window: f0000000-f7ffffff
PCI: Bridge: 0000:00:1e.0
IO window: d000-dfff
MEM window: fa000000-fbffffff
PREFETCH window: 30000000-300fffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
audit: initializing netlink socket (disabled)
audit(1157450696.464:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 3.0 (2006/03/15) Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered (default)
initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 )
Linux agpgart interface v0.101 © Dave Jones
vesafb: NVIDIA Corporation, NV34 Board - p162-1n , Chip Rev (OEM: NVIDIA)
vesafb: VBE version: 3.0
vesafb: VBIOS/hardware supports DDC2 transfers
Display is GTF capable
vesafb: monitor limits: vf = 160 Hz, hf = 96 kHz, clk = 250 MHz
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 128x48
vesafb: framebuffer at 0xf0000000, mapped to 0xe0880000, using 24576k, total 131072k
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
serial8250: ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 0) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
mice: PS/2 mouse device common for all mice
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
input: AT Translated Set 2 keyboard as /class/input/input0
ICH5: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: ST3120026A, ATA DISK drive
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: _NEC DVD_RW ND-3520A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 >
hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
EISA: Probing bus 0 at eisa.0
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI Shortcut mode
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 216k freed
Adding 955828k swap on /dev/hda11. Priority:-1 extents:1 across:955828k
EXT3 FS on hda10, internal journal
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Real Time Clock Driver v1.12ac
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 54712 usecs
intel8x0: clocking to 48000
fbsplash: console 0 using theme 'default'
fbsplash: switched splash state to 'on' on console 0
fbsplash: console 1 using theme 'default'
fbsplash: switched splash state to 'on' on console 1
fbsplash: console 2 using theme 'default'
fbsplash: switched splash state to 'on' on console 2
fbsplash: console 3 using theme 'default'
fbsplash: switched splash state to 'on' on console 3
fbsplash: console 4 using theme 'default'
fbsplash: switched splash state to 'on' on console 4
fbsplash: console 5 using theme 'default'
fbsplash: switched splash state to 'on' on console 5
fbsplash: console 6 using theme 'default'
fbsplash: switched splash state to 'on' on console 6
fbsplash: console 7 using theme 'default'
fbsplash: switched splash state to 'on' on console 7
fbsplash: console 8 using theme 'default'
fbsplash: switched splash state to 'on' on console 8
fbsplash: console 9 using theme 'default'
fbsplash: switched splash state to 'on' on console 9
fbsplash: console 10 using theme 'default'
fbsplash: switched splash state to 'on' on console 10
nvidia: module license 'NVIDIA' taints kernel.
nvidia: Unknown symbol remap_page_range
nvidia: Unknown symbol pci_find_class
nvidia: Unknown symbol remap_page_range
nvidia: Unknown symbol pci_find_class



так и хочется сказать RTFM!
emerge --sync
emerge nvidia-legacy-drivers

Если не поможет попробуйте другую вермию ядра, прочитайте также следующее обсуждение
gentoo.ru
[quote]

все это дело у меня не пашет. Инет только в XP т.к. вин.модем acorp sprinter@56ksoft .
А вот статья очень занятная . Премного благодарен!!!

[targeti]

Попробуй активировать в ядре Device Drivers - Memory Tecnology Device Support
RAM/ROM/Flash chip drivers - Detect flash chips by common flash interface

[sasha]

Ничего не изменилось. А вот скачал дрова 1.0-8762 и все на круги своя , сразу улыбка на лице нарисовалась.
ArtSh, хочу отблагодарить, но не знаю как. Всем, кто помогал в решении проблемы выражаю благодарность. Желаю вам успехов.

[ArtSh]

ArtSh, хочу отблагодарить, но не знаю как

↑

Самая лучшая благодарность -- чаще использовать поиск и чтение документации, а также отвечать на вопросы других новичков в gentoo...

[sasha]

Постараюсь

[shrikes]

У меня nvidia-kernel-1.0.6629-r6 стал на 2.6.15, попробуй это ядро
Я просто взял архив linux.2.6.15.tar.bz2, распаковал в /usr/src, сделал ссылку, скомпили ядро с поддержкой модулей и MTRR, происталил nvidia-kernel, и модуль грузиться,
но иксы так и не поднял (но это скорее всего не правильно настроил xorg.conf)