Решено: система ребутиться без причин

[lejak]

ну вот ничего не делаю и оп мусорок.
просто так берет и перезагружается.
бывает пакет инсталишь и оп.
uptime все время разный, бывает 3 дня, бывает 2 часа.

система mandriva 2008.1 64x
обновления последние.


какой лог смотреть даже незнаю

параметры загрузки, пробывал apci=off pci=off все равно дохнет
вот щас попробывал без этих параметров, посмотрю что будет.

но всё равно проблему надо решить!!!

[SANyaSmolenskii]

ну вот ничего не делаю и оп мусорок.
просто так берет и перезагружается.

Может, дело в железе? Поставь пакет lm-sensors. Настройка , например, здесь описана http://lug.dn.ua/papers/LinuxBegin/linuxbe...article249.html
Когда настроишь, вывод читай в syslog. В KSysGuard появятся новые датчики. Или вдобавок поставь ksensors - это графическая отображалка к lm-sensors.

[lejak]

блин грешу на материнскую плату
которая была в ремонте, но вроде до этого стабильно стояла машина

[Juliette]

/var/log/messages фстудию
И отставить уже эти мандряшные посиделки о том о сём. Скоро ваще без логов и конфигов всё закрывать будем с Топпером.

[lejak]

/var/log/messages фстудию
И отставить уже эти мандряшные посиделки о том о сём. Скоро ваще без логов и конфигов всё закрывать будем с Топпером.

а что конкретно из этого файла показать?

Код:

Jun 18 10:03:12 shelld kernel: Initializing cgroup subsys cpuset Jun 18 10:03:12 shelld kernel: Linux version 2.6.24.5-server-2mnb (qateam@titan.mandriva.com) (gcc version 4.2.3 (4.2.3-6mnb1)) #1 SMP Thu Jun 12 15:33:47 EDT 2008 Jun 18 10:03:12 shelld kernel: Command line: BOOT_IMAGE=linux root=UUID=a4674a42-34ae-11dd-a6fd-e576924efdfb resume=/dev/sda5 splash=silent acpi=off pci=noacpi vga=788 Jun 18 10:03:12 shelld kernel: BIOS-provided physical RAM map: Jun 18 10:03:12 shelld kernel: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Jun 18 10:03:12 shelld kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Jun 18 10:03:12 shelld kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Jun 18 10:03:12 shelld kernel: BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable) Jun 18 10:03:12 shelld kernel: BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS) Jun 18 10:03:12 shelld kernel: BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data) Jun 18 10:03:12 shelld kernel: BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved) Jun 18 10:03:12 shelld kernel: BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Jun 18 10:03:12 shelld kernel: BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Jun 18 10:03:12 shelld kernel: BIOS-e820: 0000000100000000 - 0000000130000000 (usable) Jun 18 10:03:13 shelld kernel: end_pfn_map = 1245184 Jun 18 10:03:13 shelld kernel: DMI 2.4 present. Jun 18 10:03:13 shelld kernel: No NUMA configuration found Jun 18 10:03:13 shelld kernel: Faking a node at 0000000000000000-0000000130000000 Jun 18 10:03:13 shelld kernel: Bootmem setup node 0 0000000000000000-0000000130000000 Jun 18 10:03:13 shelld kernel: Zone PFN ranges: Jun 18 10:03:13 shelld kernel: DMA 0 -> 4096 Jun 18 10:03:13 shelld kernel: DMA32 4096 -> 1048576 Jun 18 10:03:13 shelld kernel: Normal 1048576 -> 1245184 Jun 18 10:03:13 shelld kernel: Movable zone start PFN for each node Jun 18 10:03:13 shelld kernel: early_node_map[3] active PFN ranges Jun 18 10:03:13 shelld kernel: 0: 0 -> 159 Jun 18 10:03:13 shelld kernel: 0: 256 -> 851680 Jun 18 10:03:13 shelld kernel: 0: 1048576 -> 1245184 Jun 18 10:03:13 shelld kernel: ATI board detected. Disabling timer routing over 8254. Jun 18 10:03:13 shelld kernel: Intel MultiProcessor Specification v1.4 Jun 18 10:03:13 shelld kernel: MPTABLE: OEM ID: OEM00000 MPTABLE: Product ID: PROD00000000 MPTABLE: APIC at: 0xFEE00000 Jun 18 10:03:13 shelld kernel: Processor #0 (Bootup-CPU) Jun 18 10:03:13 shelld kernel: Processor #1 Jun 18 10:03:13 shelld kernel: Processor #2 Jun 18 10:03:13 shelld kernel: Processor #3 Jun 18 10:03:13 shelld kernel: I/O APIC #4 at 0xFEC00000. Jun 18 10:03:13 shelld kernel: Setting APIC routing to flat Jun 18 10:03:13 shelld kernel: Processors: 4 Jun 18 10:03:13 shelld kernel: swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 Jun 18 10:03:13 shelld kernel: swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 Jun 18 10:03:13 shelld kernel: swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 Jun 18 10:03:13 shelld kernel: swsusp: Registered nosave memory region: 00000000cfee0000 - 00000000cfee3000 Jun 18 10:03:13 shelld kernel: swsusp: Registered nosave memory region: 00000000cfee3000 - 00000000cfef0000 Jun 18 10:03:13 shelld kernel: swsusp: Registered nosave memory region: 00000000cfef0000 - 00000000cff00000 Jun 18 10:03:13 shelld kernel: swsusp: Registered nosave memory region: 00000000cff00000 - 00000000e0000000 Jun 18 10:03:13 shelld kernel: swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000 Jun 18 10:03:13 shelld kernel: swsusp: Registered nosave memory region: 00000000f0000000 - 00000000fec00000 Jun 18 10:03:13 shelld kernel: swsusp: Registered nosave memory region: 00000000fec00000 - 0000000100000000 Jun 18 10:03:13 shelld kernel: Allocating PCI resources starting at d0000000 (gap: cff00000:10100000) Jun 18 10:03:13 shelld kernel: SMP: Allowing 4 CPUs, 0 hotplug CPUs Jun 18 10:03:13 shelld kernel: PERCPU: Allocating 37344 bytes of per cpu data Jun 18 10:03:13 shelld kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029916 Jun 18 10:03:13 shelld kernel: Policy zone: Normal Jun 18 10:03:13 shelld kernel: Kernel command line: BOOT_IMAGE=linux root=UUID=a4674a42-34ae-11dd-a6fd-e576924efdfb resume=/dev/sda5 splash=silent acpi=off pci=noacpi vga=788 Jun 18 10:03:13 shelld kernel: bootsplash: silent mode. Jun 18 10:03:13 shelld kernel: Initializing CPU#0 Jun 18 10:03:13 shelld kernel: PID hash table entries: 4096 (order: 12, 32768 bytes) Jun 18 10:03:13 shelld kernel: TSC calibrated against PIT Jun 18 10:03:13 shelld kernel: Marking TSC unstable due to TSCs unsynchronized Jun 18 10:03:13 shelld kernel: time.c: Detected 2411.072 MHz processor. Jun 18 10:03:13 shelld kernel: Console: colour dummy device 80x25 Jun 18 10:03:13 shelld kernel: console [tty0] enabled Jun 18 10:03:13 shelld kernel: Checking aperture... Jun 18 10:03:13 shelld kernel: CPU 0: aperture @ 4000000 size 32 MB Jun 18 10:03:13 shelld kernel: Aperture too small (32 MB) Jun 18 10:03:13 shelld kernel: No AGP bridge found Jun 18 10:03:13 shelld kernel: Your BIOS doesn't leave a aperture memory hole Jun 18 10:03:13 shelld kernel: Please enable the IOMMU option in the BIOS setup Jun 18 10:03:13 shelld kernel: This costs you 64 MB of RAM Jun 18 10:03:13 shelld kernel: Mapping aperture over 65536 KB of RAM @ 4000000 Jun 18 10:03:13 shelld kernel: Memory: 4050940k/4980736k available (2675k kernel code, 141824k reserved, 1043k data, 352k init) Jun 18 10:03:13 shelld kernel: SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 Jun 18 10:03:13 shelld kernel: Calibrating delay using timer specific routine.. 4824.84 BogoMIPS (lpj=24124228) Jun 18 10:03:13 shelld kernel: Security Framework initialized Jun 18 10:03:13 shelld kernel: AppArmor: AppArmor disabled by boottime parameter Jun 18 10:03:13 shelld kernel: Jun 18 10:03:13 shelld kernel: Capability LSM initialized Jun 18 10:03:13 shelld kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Jun 18 10:03:13 shelld kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Jun 18 10:03:13 shelld kernel: Mount-cache hash table entries: 256 Jun 18 10:03:13 shelld kernel: Hook version: 2.6.24 2008/01/25 Jun 18 10:03:13 shelld kernel: Initializing cgroup subsys ns Jun 18 10:03:13 shelld kernel: Initializing cgroup subsys cpuacct Jun 18 10:03:13 shelld kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Jun 18 10:03:13 shelld kernel: CPU: L2 Cache: 512K (64 bytes/line) Jun 18 10:03:13 shelld kernel: CPU 0/0 -> Node 0 Jun 18 10:03:13 shelld kernel: CPU: Physical Processor ID: 0 Jun 18 10:03:13 shelld kernel: CPU: Processor Core ID: 0 Jun 18 10:03:13 shelld kernel: SMP alternatives: switching to UP code Jun 18 10:03:13 shelld kernel: Early unpacking initramfs... done Jun 18 10:03:13 shelld kernel: Freeing initrd memory: 2823k freed Jun 18 10:03:13 shelld kernel: ExtINT not setup in hardware but reported by MP table Jun 18 10:03:13 shelld kernel: Using local APIC timer interrupts. Jun 18 10:03:13 shelld kernel: Detected 12.557 MHz APIC timer. Jun 18 10:03:13 shelld kernel: SMP alternatives: switching to SMP code Jun 18 10:03:13 shelld kernel: Booting processor 1/4 APIC 0x1 Jun 18 10:03:13 shelld kernel: Initializing CPU#1 Jun 18 10:03:13 shelld kernel: Calibrating delay using timer specific routine.. 4822.18 BogoMIPS (lpj=24110939) Jun 18 10:03:13 shelld kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Jun 18 10:03:13 shelld kernel: CPU: L2 Cache: 512K (64 bytes/line) Jun 18 10:03:13 shelld kernel: CPU 1/1 -> Node 0 Jun 18 10:03:13 shelld kernel: CPU: Physical Processor ID: 0 Jun 18 10:03:13 shelld kernel: CPU: Processor Core ID: 1 Jun 18 10:03:13 shelld kernel: AMD Phenom™ 9750 Quad-Core Processor stepping 03 Jun 18 10:03:13 shelld kernel: SMP alternatives: switching to SMP code Jun 18 10:03:13 shelld kernel: Booting processor 2/4 APIC 0x2 Jun 18 10:03:13 shelld kernel: Initializing CPU#2 Jun 18 10:03:13 shelld kernel: Calibrating delay using timer specific routine.. 4822.19 BogoMIPS (lpj=24110950) Jun 18 10:03:13 shelld kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Jun 18 10:03:13 shelld kernel: CPU: L2 Cache: 512K (64 bytes/line) Jun 18 10:03:13 shelld kernel: CPU 2/2 -> Node 0 Jun 18 10:03:13 shelld kernel: CPU: Physical Processor ID: 0 Jun 18 10:03:13 shelld kernel: CPU: Processor Core ID: 2 Jun 18 10:03:13 shelld kernel: AMD Phenom™ 9750 Quad-Core Processor stepping 03 Jun 18 10:03:13 shelld kernel: SMP alternatives: switching to SMP code Jun 18 10:03:13 shelld kernel: Booting processor 3/4 APIC 0x3 Jun 18 10:03:13 shelld kernel: Initializing CPU#3 Jun 18 10:03:13 shelld kernel: Calibrating delay using timer specific routine.. 4822.18 BogoMIPS (lpj=24110934) Jun 18 10:03:13 shelld kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Jun 18 10:03:13 shelld kernel: CPU: L2 Cache: 512K (64 bytes/line) Jun 18 10:03:13 shelld kernel: CPU 3/3 -> Node 0 Jun 18 10:03:13 shelld kernel: CPU: Physical Processor ID: 0 Jun 18 10:03:13 shelld kernel: CPU: Processor Core ID: 3 Jun 18 10:03:13 shelld kernel: AMD Phenom™ 9750 Quad-Core Processor stepping 03 Jun 18 10:03:13 shelld kernel: Brought up 4 CPUs Jun 18 10:03:13 shelld kernel: net_namespace: 120 bytes Jun 18 10:03:13 shelld kernel: NET: Registered protocol family 16 Jun 18 10:03:13 shelld kernel: PCI: Using configuration type 1 Jun 18 10:03:13 shelld kernel: ACPI: Interpreter disabled. Jun 18 10:03:13 shelld kernel: Linux Plug and Play Support v0.97 © Adam Belay Jun 18 10:03:13 shelld kernel: pnp: PnP ACPI: disabled Jun 18 10:03:13 shelld kernel: PCI: Probing PCI hardware Jun 18 10:03:13 shelld kernel: PCI: Transparent bridge - 0000:00:14.4 Jun 18 10:03:13 shelld kernel: PCI->APIC IRQ transform: 0000:00:12.0[A] -> IRQ 22 Jun 18 10:03:13 shelld kernel: PCI->APIC IRQ transform: 0000:00:13.0[A] -> IRQ 16 Jun 18 10:03:13 shelld kernel: PCI->APIC IRQ transform: 0000:00:13.1[B] -> IRQ 17 Jun 18 10:03:13 shelld kernel: PCI->APIC IRQ transform: 0000:00:13.2[C] -> IRQ 18 Jun 18 10:03:13 shelld kernel: PCI->APIC IRQ transform: 0000:00:13.3[B] -> IRQ 17 Jun 18 10:03:13 shelld kernel: PCI->APIC IRQ transform: 0000:00:13.4[C] -> IRQ 18 Jun 18 10:03:13 shelld kernel: PCI->APIC IRQ transform: 0000:00:13.5[D] -> IRQ 19 Jun 18 10:03:13 shelld kernel: PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 18 Jun 18 10:03:13 shelld kernel: PCI->APIC IRQ transform: 0000:01:00.1[B] -> IRQ 18 Jun 18 10:03:13 shelld kernel: PCI->APIC IRQ transform: 0000:02:00.0[A] -> IRQ 17 Jun 18 10:03:13 shelld kernel: PCI->APIC IRQ transform: 0000:02:00.1[B] -> IRQ 17 Jun 18 10:03:13 shelld kernel: PCI->APIC IRQ transform: 0000:03:00.0[A] -> IRQ 18 Jun 18 10:03:13 shelld kernel: PCI->APIC IRQ transform: 0000:03:00.1[B] -> IRQ 18 Jun 18 10:03:13 shelld kernel: PCI->APIC IRQ transform: 0000:04:06.0[A] -> IRQ 20 Jun 18 10:03:13 shelld kernel: PCI->APIC IRQ transform: 0000:04:07.0[A] -> IRQ 21 Jun 18 10:03:13 shelld kernel: DMAR:No DMAR devices found Jun 18 10:03:13 shelld kernel: PCI-DMA: Disabling AGP. Jun 18 10:03:13 shelld kernel: PCI-DMA: aperture base @ 4000000 size 65536 KB Jun 18 10:03:13 shelld kernel: PCI-DMA: using GART IOMMU. Jun 18 10:03:13 shelld kernel: PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture Jun 18 10:03:13 shelld kernel: PCI: Bridge: 0000:00:02.0 Jun 18 10:03:13 shelld kernel: IO window: c000-cfff Jun 18 10:03:13 shelld kernel: MEM window: fdd00000-fddfffff Jun 18 10:03:13 shelld kernel: PREFETCH window: d0000000-dfffffff Jun 18 10:03:13 shelld kernel: PCI: Bridge: 0000:00:09.0 Jun 18 10:03:13 shelld kernel: IO window: e000-efff Jun 18 10:03:13 shelld kernel: MEM window: fdc00000-fdcfffff Jun 18 10:03:13 shelld kernel: PREFETCH window: fdb00000-fdbfffff Jun 18 10:03:13 shelld kernel: PCI: Bridge: 0000:00:0a.0 Jun 18 10:03:13 shelld kernel: IO window: d000-dfff Jun 18 10:03:13 shelld kernel: MEM window: fdf00000-fdffffff Jun 18 10:03:13 shelld kernel: PREFETCH window: fde00000-fdefffff Jun 18 10:03:13 shelld kernel: PCI: Bridge: 0000:00:14.4 Jun 18 10:03:13 shelld kernel: IO window: b000-bfff Jun 18 10:03:13 shelld kernel: MEM window: fda00000-fdafffff Jun 18 10:03:13 shelld kernel: PREFETCH window: fd900000-fd9fffff Jun 18 10:03:13 shelld kernel: NET: Registered protocol family 2 Jun 18 10:03:13 shelld kernel: IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) Jun 18 10:03:13 shelld kernel: TCP established hash table entries: 524288 (order: 11, 8388608 bytes) Jun 18 10:03:13 shelld kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) Jun 18 10:03:13 shelld kernel: TCP: Hash tables configured (established 524288 bind 65536) Jun 18 10:03:13 shelld kernel: TCP reno registered Jun 18 10:03:13 shelld kernel: audit: initializing netlink socket (disabled) Jun 18 10:03:13 shelld kernel: audit(1213783362.000:1): initialized Jun 18 10:03:13 shelld kernel: Total HugeTLB memory allocated, 0 Jun 18 10:03:13 shelld kernel: VFS: Disk quotas dquot_6.5.1 Jun 18 10:03:13 shelld kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Jun 18 10:03:13 shelld kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Jun 18 10:03:13 shelld kernel: io scheduler noop registered Jun 18 10:03:13 shelld kernel: io scheduler anticipatory registered Jun 18 10:03:13 shelld kernel: io scheduler deadline registered Jun 18 10:03:13 shelld kernel: io scheduler cfq registered (default) Jun 18 10:03:13 shelld kernel: assign_interrupt_mode Found MSI capability Jun 18 10:03:13 shelld last message repeated 2 times Jun 18 10:03:13 shelld kernel: vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20001080000, using 3750k, total 16384k Jun 18 10:03:13 shelld kernel: vesafb: mode is 800x600x16, linelength=1600, pages=16 Jun 18 10:03:13 shelld kernel: vesafb: scrolling: redraw Jun 18 10:03:13 shelld kernel: vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Jun 18 10:03:13 shelld kernel: bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 216280 bytes,<6>...found (800x600, 216184 bytes, v3). Jun 18 10:03:13 shelld kernel: Console: switching to colour frame buffer device 91x30 Jun 18 10:03:13 shelld kernel: fb0: VESA VGA frame buffer device Jun 18 10:03:13 shelld kernel: Linux agpgart interface v0.102 Jun 18 10:03:13 shelld kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled Jun 18 10:03:13 shelld kernel: RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize Jun 18 10:03:13 shelld kernel: input: Macintosh mouse button emulation as /class/input/input0 Jun 18 10:03:13 shelld kernel: PNP: No PS/2 controller found. Probing ports directly. Jun 18 10:03:13 shelld kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Jun 18 10:03:13 shelld kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 Jun 18 10:03:13 shelld kernel: mice: PS/2 mouse device common for all mice Jun 18 10:03:13 shelld kernel: input: AT Translated Set 2 keyboard as /class/input/input1 Jun 18 10:03:13 shelld kernel: cpuidle: using governor ladder Jun 18 10:03:13 shelld kernel: cpuidle: using governor menu Jun 18 10:03:13 shelld kernel: TCP cubic registered Jun 18 10:03:13 shelld kernel: NET: Registered protocol family 1 Jun 18 10:03:13 shelld kernel: registered taskstats version 1 Jun 18 10:03:13 shelld kernel: BIOS EDD facility v0.16 2004-Jun-25, 6 devices found Jun 18 10:03:13 shelld kernel: Freeing unused kernel memory: 352k freed Jun 18 10:03:13 shelld kernel: input: ImExPS/2 Generic Explorer Mouse as /class/input/input2 Jun 18 10:03:13 shelld kernel: usbcore: registered new interface driver usbfs Jun 18 10:03:13 shelld kernel: usbcore: registered new interface driver hub Jun 18 10:03:13 shelld kernel: usbcore: registered new device driver usb Jun 18 10:03:13 shelld kernel: ehci_hcd 0000:00:13.5: EHCI Host Controller Jun 18 10:03:13 shelld kernel: ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 Jun 18 10:03:13 shelld kernel: ehci_hcd 0000:00:13.5: debug port 1 Jun 18 10:03:13 shelld kernel: ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000 Jun 18 10:03:13 shelld kernel: ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Jun 18 10:03:13 shelld kernel: usb usb1: configuration #1 chosen from 1 choice Jun 18 10:03:13 shelld kernel: hub 1-0:1.0: USB hub found Jun 18 10:03:13 shelld kernel: hub 1-0:1.0: 10 ports detected Jun 18 10:03:13 shelld kernel: ohci_hcd 0000:00:13.0: OHCI Host Controller Jun 18 10:03:13 shelld kernel: ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 Jun 18 10:03:13 shelld kernel: ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000 Jun 18 10:03:13 shelld kernel: usb usb2: configuration #1 chosen from 1 choice Jun 18 10:03:13 shelld kernel: hub 2-0:1.0: USB hub found Jun 18 10:03:13 shelld kernel: hub 2-0:1.0: 2 ports detected Jun 18 10:03:13 shelld kernel: ohci_hcd 0000:00:13.1: OHCI Host Controller Jun 18 10:03:13 shelld kernel: ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 Jun 18 10:03:13 shelld kernel: ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000 Jun 18 10:03:13 shelld kernel: usb usb3: configuration #1 chosen from 1 choice Jun 18 10:03:13 shelld kernel: hub 3-0:1.0: USB hub found Jun 18 10:03:13 shelld kernel: hub 3-0:1.0: 2 ports detected Jun 18 10:03:13 shelld kernel: ohci_hcd 0000:00:13.2: OHCI Host Controller Jun 18 10:03:13 shelld kernel: ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 Jun 18 10:03:13 shelld kernel: ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000 Jun 18 10:03:13 shelld kernel: usb usb4: configuration #1 chosen from 1 choice Jun 18 10:03:13 shelld kernel: hub 4-0:1.0: USB hub found Jun 18 10:03:13 shelld kernel: hub 4-0:1.0: 2 ports detected Jun 18 10:03:13 shelld kernel: ohci_hcd 0000:00:13.3: OHCI Host Controller Jun 18 10:03:13 shelld kernel: ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 Jun 18 10:03:13 shelld kernel: ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000 Jun 18 10:03:13 shelld kernel: usb usb5: configuration #1 chosen from 1 choice Jun 18 10:03:13 shelld kernel: hub 5-0:1.0: USB hub found Jun 18 10:03:13 shelld kernel: hub 5-0:1.0: 2 ports detected Jun 18 10:03:13 shelld kernel: ohci_hcd 0000:00:13.4: OHCI Host Controller Jun 18 10:03:13 shelld kernel: ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 Jun 18 10:03:13 shelld kernel: ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000 Jun 18 10:03:13 shelld kernel: usb usb6: configuration #1 chosen from 1 choice Jun 18 10:03:13 shelld kernel: hub 6-0:1.0: USB hub found Jun 18 10:03:13 shelld kernel: hub 6-0:1.0: 2 ports detected Jun 18 10:03:13 shelld kernel: USB Universal Host Controller Interface driver v3.0 Jun 18 10:03:13 shelld kernel: SCSI subsystem initialized Jun 18 10:03:13 shelld kernel: Driver 'sd' needs updating - please use bus_type methods Jun 18 10:03:13 shelld kernel: ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit Jun 18 10:03:13 shelld kernel: ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP Jun 18 10:03:13 shelld kernel: ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode Jun 18 10:03:13 shelld kernel: ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part Jun 18 10:03:13 shelld kernel: scsi0 : ahci Jun 18 10:03:13 shelld kernel: scsi1 : ahci Jun 18 10:03:13 shelld kernel: scsi2 : ahci Jun 18 10:03:13 shelld kernel: scsi3 : ahci Jun 18 10:03:13 shelld kernel: ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 Jun 18 10:03:13 shelld kernel: ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 Jun 18 10:03:13 shelld kernel: ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 Jun 18 10:03:13 shelld kernel: ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 Jun 18 10:03:13 shelld kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 18 10:03:13 shelld kernel: ata1.00: HPA detected: current 976771055, native 976773168 Jun 18 10:03:13 shelld kernel: ata1.00: ATA-7: Hitachi HUA721050KLA330, GK6OA70M, max UDMA/133 Jun 18 10:03:13 shelld kernel: ata1.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32) Jun 18 10:03:13 shelld kernel: ata1.00: configured for UDMA/133 Jun 18 10:03:13 shelld kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 18 10:03:13 shelld kernel: ata2.00: HPA detected: current 976771055, native 976773168 Jun 18 10:03:13 shelld kernel: ata2.00: ATA-7: Hitachi HUA721050KLA330, GK6OA70M, max UDMA/133 Jun 18 10:03:13 shelld kernel: ata2.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32) Jun 18 10:03:13 shelld kernel: ata2.00: configured for UDMA/133 Jun 18 10:03:13 shelld kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 18 10:03:13 shelld kernel: ata3.00: HPA detected: current 976771055, native 976773168 Jun 18 10:03:13 shelld kernel: ata3.00: ATA-7: Hitachi HUA721050KLA330, GK6OA70M, max UDMA/133 Jun 18 10:03:13 shelld kernel: ata3.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32) Jun 18 10:03:13 shelld kernel: ata3.00: configured for UDMA/133 Jun 18 10:03:13 shelld kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 18 10:03:13 shelld kernel: ata4.00: HPA detected: current 976771055, native 976773168 Jun 18 10:03:13 shelld kernel: ata4.00: ATA-7: Hitachi HUA721050KLA330, GK6OA70M, max UDMA/133 Jun 18 10:03:13 shelld kernel: ata4.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32) Jun 18 10:03:13 shelld kernel: ata4.00: configured for UDMA/133 Jun 18 10:03:13 shelld kernel: scsi 0:0:0:0: Direct-Access ATA Hitachi HUA72105 GK6O PQ: 0 ANSI: 5 Jun 18 10:03:13 shelld kernel: sd 0:0:0:0: [sda] 976771055 512-byte hardware sectors (500107 MB) Jun 18 10:03:13 shelld kernel: sd 0:0:0:0: [sda] Write Protect is off Jun 18 10:03:13 shelld kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 18 10:03:13 shelld kernel: sd 0:0:0:0: [sda] 976771055 512-byte hardware sectors (500107 MB) Jun 18 10:03:13 shelld kernel: sd 0:0:0:0: [sda] Write Protect is off Jun 18 10:03:13 shelld kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 18 10:03:13 shelld kernel: sda: sda1 Jun 18 10:03:13 shelld kernel: sd 0:0:0:0: [sda] Attached SCSI disk Jun 18 10:03:13 shelld kernel: scsi 1:0:0:0: Direct-Access ATA Hitachi HUA72105 GK6O PQ: 0 ANSI: 5 Jun 18 10:03:13 shelld kernel: sd 1:0:0:0: [sdb] 976771055 512-byte hardware sectors (500107 MB) Jun 18 10:03:13 shelld kernel: sd 1:0:0:0: [sdb] Write Protect is off Jun 18 10:03:13 shelld kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 18 10:03:13 shelld kernel: sd 1:0:0:0: [sdb] 976771055 512-byte hardware sectors (500107 MB) Jun 18 10:03:13 shelld kernel: sd 1:0:0:0: [sdb] Write Protect is off Jun 18 10:03:13 shelld kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 18 10:03:13 shelld kernel: sdb: sdb1 Jun 18 10:03:13 shelld kernel: sd 1:0:0:0: [sdb] Attached SCSI disk Jun 18 10:03:13 shelld kernel: scsi 2:0:0:0: Direct-Access ATA Hitachi HUA72105 GK6O PQ: 0 ANSI: 5 Jun 18 10:03:13 shelld kernel: sd 2:0:0:0: [sdc] 976771055 512-byte hardware sectors (500107 MB) Jun 18 10:03:13 shelld kernel: sd 2:0:0:0: [sdc] Write Protect is off Jun 18 10:03:13 shelld kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 18 10:03:13 shelld kernel: sd 2:0:0:0: [sdc] 976771055 512-byte hardware sectors (500107 MB) Jun 18 10:03:13 shelld kernel: sd 2:0:0:0: [sdc] Write Protect is off Jun 18 10:03:13 shelld kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 18 10:03:13 shelld kernel: sdc: sdc1 Jun 18 10:03:13 shelld kernel: sd 2:0:0:0: [sdc] Attached SCSI disk Jun 18 10:03:13 shelld kernel: scsi 3:0:0:0: Direct-Access ATA Hitachi HUA72105 GK6O PQ: 0 ANSI: 5 Jun 18 10:03:13 shelld kernel: sd 3:0:0:0: [sdd] 976771055 512-byte hardware sectors (500107 MB) Jun 18 10:03:13 shelld kernel: sd 3:0:0:0: [sdd] Write Protect is off Jun 18 10:03:13 shelld kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 18 10:03:13 shelld kernel: sd 3:0:0:0: [sdd] 976771055 512-byte hardware sectors (500107 MB) Jun 18 10:03:13 shelld kernel: sd 3:0:0:0: [sdd] Write Protect is off Jun 18 10:03:13 shelld kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 18 10:03:13 shelld kernel: sdd: sdd1 Jun 18 10:03:13 shelld kernel: sd 3:0:0:0: [sdd] Attached SCSI disk Jun 18 10:03:13 shelld kernel: ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode Jun 18 10:03:13 shelld kernel: ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part Jun 18 10:03:13 shelld kernel: scsi4 : ahci Jun 18 10:03:13 shelld kernel: scsi5 : ahci Jun 18 10:03:13 shelld kernel: ata5: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe100 irq 17 Jun 18 10:03:13 shelld kernel: ata6: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe180 irq 17 Jun 18 10:03:13 shelld kernel: ata5: SATA link down (SStatus 0 SControl 300) Jun 18 10:03:13 shelld kernel: ata6: SATA link down (SStatus 0 SControl 300) Jun 18 10:03:13 shelld kernel: ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode Jun 18 10:03:13 shelld kernel: ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part Jun 18 10:03:13 shelld kernel: scsi6 : ahci Jun 18 10:03:13 shelld kernel: scsi7 : ahci Jun 18 10:03:13 shelld kernel: ata7: SATA max UDMA/133 abar m8192@0xfdffe000 port 0xfdffe100 irq 18 Jun 18 10:03:13 shelld kernel: ata8: SATA max UDMA/133 abar m8192@0xfdffe000 port 0xfdffe180 irq 18 Jun 18 10:03:13 shelld kernel: ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 18 10:03:13 shelld kernel: ata7.00: HPA detected: current 312579695, native 312581808 Jun 18 10:03:13 shelld kernel: ata7.00: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7 Jun 18 10:03:13 shelld kernel: ata7.00: 312579695 sectors, multi 16: LBA48 NCQ (depth 31/32) Jun 18 10:03:13 shelld kernel: ata7.00: configured for UDMA/133 Jun 18 10:03:13 shelld kernel: ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jun 18 10:03:13 shelld kernel: ata8.00: ATAPI: Optiarc DVD RW AD-7200S, 1.01, max UDMA/100 Jun 18 10:03:13 shelld kernel: ata8.00: configured for UDMA/100 Jun 18 10:03:13 shelld kernel: scsi 6:0:0:0: Direct-Access ATA SAMSUNG HD161HJ JF10 PQ: 0 ANSI: 5 Jun 18 10:03:13 shelld kernel: sd 6:0:0:0: [sde] 312579695 512-byte hardware sectors (160041 MB) Jun 18 10:03:13 shelld kernel: sd 6:0:0:0: [sde] Write Protect is off Jun 18 10:03:13 shelld kernel: sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 18 10:03:13 shelld kernel: sd 6:0:0:0: [sde] 312579695 512-byte hardware sectors (160041 MB) Jun 18 10:03:13 shelld kernel: sd 6:0:0:0: [sde] Write Protect is off Jun 18 10:03:13 shelld kernel: sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 18 10:03:13 shelld kernel: sde: sde1 sde2 < sde5 sde6 sde7 sde8 sde9 > Jun 18 10:03:13 shelld kernel: sd 6:0:0:0: [sde] Attached SCSI disk Jun 18 10:03:13 shelld kernel: scsi 7:0:0:0: CD-ROM Optiarc DVD RW AD-7200S 1.01 PQ: 0 ANSI: 5 Jun 18 10:03:13 shelld kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Jun 18 10:03:13 shelld kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Jun 18 10:03:13 shelld kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Jun 18 10:03:13 shelld kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Jun 18 10:03:13 shelld kernel: JMB: IDE controller (0x197b:0x2363 rev 0x02) at PCI slot 0000:02:00.1 Jun 18 10:03:13 shelld kernel: PCI: Enabling device 0000:02:00.1 (0000 -> 0001) Jun 18 10:03:13 shelld kernel: JMB: 100% native mode on irq 17 Jun 18 10:03:13 shelld kernel: ide0: BM-DMA at 0xeb00-0xeb07, BIOS settings: hda:pio, hdb:pio Jun 18 10:03:13 shelld kernel: ide1: BM-DMA at 0xeb08-0xeb0f, BIOS settings: hdc:pio, hdd:pio Jun 18 10:03:13 shelld kernel: JMB: IDE controller (0x197b:0x2363 rev 0x02) at PCI slot 0000:03:00.1 Jun 18 10:03:13 shelld kernel: PCI: Enabling device 0000:03:00.1 (0000 -> 0001) Jun 18 10:03:13 shelld kernel: JMB: 100% native mode on irq 18 Jun 18 10:03:13 shelld kernel: ide2: BM-DMA at 0xdb00-0xdb07, BIOS settings: hde:pio, hdf:pio Jun 18 10:03:13 shelld kernel: ide3: BM-DMA at 0xdb08-0xdb0f, BIOS settings: hdg:DMA, hdh:DMA Jun 18 10:03:13 shelld kernel: SB600_PATA: IDE controller (0x1002:0x438c rev 0x00) at PCI slot 0000:00:14.1 Jun 18 10:03:13 shelld kernel: SB600_PATA: not 100% native mode: will probe irqs later Jun 18 10:03:13 shelld kernel: SB600_PATA: too many IDE interfaces, no room in table Jun 18 10:03:13 shelld kernel: kjournald starting. Commit interval 5 seconds Jun 18 10:03:13 shelld kernel: EXT3-fs: mounted filesystem with ordered data mode. Jun 18 10:03:13 shelld kernel: TomoyoLinux Mandatory Access Control disabled by default. Jun 18 10:03:13 shelld kernel: You need to install ccs-tools if you want to enable it. Jun 18 10:03:13 shelld kernel: md: bind<sdc1> Jun 18 10:03:13 shelld kernel: md: bind<sdb1> Jun 18 10:03:13 shelld kernel: md: bind<sda1> Jun 18 10:03:13 shelld kernel: md: bind<sdd1> Jun 18 10:03:13 shelld kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0 Jun 18 10:03:13 shelld kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0 Jun 18 10:03:13 shelld kernel: sd 2:0:0:0: Attached scsi generic sg2 type 0 Jun 18 10:03:13 shelld kernel: sd 3:0:0:0: Attached scsi generic sg3 type 0 Jun 18 10:03:13 shelld kernel: sd 6:0:0:0: Attached scsi generic sg4 type 0 Jun 18 10:03:13 shelld kernel: scsi 7:0:0:0: Attached scsi generic sg5 type 5 Jun 18 10:03:13 shelld kernel: Driver 'sr' needs updating - please use bus_type methods Jun 18 10:03:13 shelld kernel: md: raid1 personality registered for level 1 Jun 18 10:03:13 shelld kernel: raid1: raid set md0 active with 2 out of 2 mirrors Jun 18 10:03:13 shelld kernel: raid1: raid set md1 active with 2 out of 2 mirrors Jun 18 10:03:13 shelld kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Jun 18 10:03:13 shelld kernel: Uniform CD-ROM driver Revision: 3.20 Jun 18 10:03:13 shelld kernel: input: PC Speaker as /class/input/input3 Jun 18 10:03:13 shelld kernel: piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device Jun 18 10:03:13 shelld kernel: Linux Tulip driver version 1.1.15 (Feb 27, 2007) Jun 18 10:03:13 shelld kernel: tulip0: MII transceiver #1 config 1000 status 786d advertising 05e1. Jun 18 10:03:13 shelld kernel: eth0: ADMtek Comet rev 49 at Port 0xbc00, 00:04:75:b4:a7:3f, IRQ 21. Jun 18 10:03:13 shelld kernel: 8139too Fast Ethernet driver 0.9.28 Jun 18 10:03:13 shelld kernel: eth1: RealTek RTL8139 at 0xffffc20001062000, 00:0e:2e:72:46:7a, IRQ 20 Jun 18 10:03:13 shelld kernel: irq 19: nobody cared (try booting with the "irqpoll" option) Jun 18 10:03:13 shelld kernel: Pid: 1924, comm: modprobe Not tainted 2.6.24.5-server-2mnb #1 Jun 18 10:03:13 shelld kernel: Jun 18 10:03:13 shelld kernel: Call Trace: Jun 18 10:03:13 shelld kernel: <IRQ> [<ffffffff8027e4be>] __report_bad_irq+0x1e/0x80 Jun 18 10:03:13 shelld kernel: [<ffffffff8027e7cd>] note_interrupt+0x2ad/0x2e0 Jun 18 10:03:13 shelld kernel: [<ffffffff8027f311>] handle_fasteoi_irq+0xa1/0x110 Jun 18 10:03:13 shelld kernel: [<ffffffff8020f92b>] do_IRQ+0x7b/0x100 Jun 18 10:03:13 shelld kernel: [<ffffffff8020c8a1>] ret_from_intr+0x0/0xa Jun 18 10:03:13 shelld kernel: <EOI> [<ffffffff80357378>] __delay+0x8/0x20 Jun 18 10:03:13 shelld kernel: [<ffffffff881aab30>] :snd_hda_intel:azx_get_response+0x120/0x1e0 Jun 18 10:03:13 shelld kernel: [<ffffffff881ac89a>] :snd_hda_intel:snd_hda_codec_read+0x6a/0xb0 Jun 18 10:03:13 shelld kernel: [<ffffffff881afb89>] :snd_hda_intel:snd_hda_codec_new+0xf9/0x550 Jun 18 10:03:13 shelld kernel: [<ffffffff881ab961>] :snd_hda_intel:azx_probe+0x711/0xb90 Jun 18 10:03:13 shelld kernel: [<ffffffff881aa920>] :snd_hda_intel:azx_send_cmd+0x0/0xf0 Jun 18 10:03:13 shelld kernel: [<ffffffff881aaa10>] :snd_hda_intel:azx_get_response+0x0/0x1e0 Jun 18 10:03:13 shelld kernel: [<ffffffff881aa8c0>] :snd_hda_intel:azx_power_notify+0x0/0x60 Jun 18 10:03:13 shelld kernel: [<ffffffff80365798>] pci_device_probe+0xf8/0x170 Jun 18 10:03:13 shelld kernel: [<ffffffff803d68dc>] driver_probe_device+0x9c/0x1b0 Jun 18 10:03:13 shelld kernel: [<ffffffff803d6ad0>] __driver_attach+0x0/0xb0 Jun 18 10:03:13 shelld kernel: [<ffffffff803d6b75>] __driver_attach+0xa5/0xb0 Jun 18 10:03:13 shelld kernel: [<ffffffff803d5aed>] bus_for_each_dev+0x4d/0x80 Jun 18 10:03:13 shelld kernel: [<ffffffff803d5f5c>] bus_add_driver+0xac/0x220 Jun 18 10:03:13 shelld kernel: [<ffffffff80365a19>] __pci_register_driver+0x69/0xb0 Jun 18 10:03:13 shelld kernel: [<ffffffff80262cf5>] sys_init_module+0x1a5/0x19c0 Jun 18 10:03:13 shelld kernel: [<ffffffff80252b90>] autoremove_wake_function+0x0/0x30 Jun 18 10:03:13 shelld kernel: [<ffffffff8020c38e>] system_call+0x7e/0x83 Jun 18 10:03:13 shelld kernel: Jun 18 10:03:13 shelld kernel: handlers: Jun 18 10:03:13 shelld kernel: [<ffffffff88004e40>] (usb_hcd_irq+0x0/0x60 [usbcore]) Jun 18 10:03:13 shelld kernel: Disabling IRQ #19 Jun 18 10:03:13 shelld kernel: hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000 Jun 18 10:03:13 shelld kernel: floppy0: no floppy controllers found Jun 18 10:03:13 shelld kernel: Initializing USB Mass Storage driver... Jun 18 10:03:13 shelld kernel: usbcore: registered new interface driver usb-storage Jun 18 10:03:13 shelld kernel: USB Mass Storage support registered. Jun 18 10:03:13 shelld kernel: device-mapper: uevent: version 1.0.3 Jun 18 10:03:13 shelld kernel: device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com Jun 18 10:03:13 shelld kernel: EXT3 FS on sde1, internal journal Jun 18 10:03:13 shelld kernel: kjournald starting. Commit interval 5 seconds Jun 18 10:03:13 shelld kernel: EXT3 FS on sde8, internal journal Jun 18 10:03:13 shelld kernel: EXT3-fs: mounted filesystem with ordered data mode. Jun 18 10:03:13 shelld kernel: kjournald starting. Commit interval 5 seconds Jun 18 10:03:13 shelld kernel: EXT3 FS on sde9, internal journal Jun 18 10:03:13 shelld kernel: EXT3-fs: mounted filesystem with ordered data mode. Jun 18 10:03:13 shelld kernel: kjournald starting. Commit interval 5 seconds Jun 18 10:03:13 shelld kernel: EXT3 FS on sde6, internal journal Jun 18 10:03:13 shelld kernel: EXT3-fs: mounted filesystem with ordered data mode. Jun 18 10:03:13 shelld kernel: kjournald starting. Commit interval 5 seconds Jun 18 10:03:13 shelld kernel: EXT3 FS on sde7, internal journal Jun 18 10:03:13 shelld kernel: EXT3-fs: mounted filesystem with ordered data mode. Jun 18 10:03:13 shelld kernel: kjournald starting. Commit interval 5 seconds Jun 18 10:03:13 shelld kernel: EXT3 FS on md0, internal journal Jun 18 10:03:13 shelld kernel: EXT3-fs: mounted filesystem with ordered data mode. Jun 18 10:03:13 shelld kernel: kjournald starting. Commit interval 5 seconds Jun 18 10:03:13 shelld kernel: EXT3 FS on md1, internal journal Jun 18 10:03:13 shelld kernel: EXT3-fs: mounted filesystem with ordered data mode. Jun 18 10:03:13 shelld kernel: loop: module loaded Jun 18 10:03:13 shelld kernel: Adding 4088500k swap on /dev/sde5. Priority:-1 extents:1 across:4088500k Jun 18 10:03:13 shelld kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max) Jun 18 10:03:13 shelld kernel: ip_tables: © 2000-2006 Netfilter Core Team Jun 18 10:03:14 shelld service_harddrake[3359]: ### Program is starting ### Jun 18 10:03:14 shelld service_harddrake[3359]: running: dmidecode Jun 18 10:03:14 shelld service_harddrake[3359]: modified file /etc/sysconfig/harddrake2/kernel Jun 18 10:03:14 shelld service_harddrake[3359]: created file /etc/sysconfig/harddrake2/previous_hw Jun 18 10:03:15 shelld kernel: NET: Registered protocol family 10 Jun 18 10:03:15 shelld kernel: lo: Disabled Privacy Extensions Jun 18 10:03:15 shelld kernel: NET: Registered protocol family 17 Jun 18 10:03:15 shelld ifplugd(eth0)[3559]: ifplugd 0.28 initializing. Jun 18 10:03:15 shelld ifplugd(eth0)[3559]: Using interface eth0/00:04:75:B4:A7:3F with driver <tulip> (version: 1.1.15) Jun 18 10:03:15 shelld ifplugd(eth0)[3559]: Using detection mode: SIOCGMIIPHY Jun 18 10:03:15 shelld ifplugd(eth0)[3559]: Initialization complete, link beat detected. Jun 18 10:03:15 shelld ifplugd(eth0)[3559]: Executing '/etc/ifplugd/ifplugd.action eth0 up'. Jun 18 10:03:15 shelld ifplugd(eth1)[3614]: ifplugd 0.28 initializing. Jun 18 10:03:15 shelld kernel: eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 Jun 18 10:03:15 shelld ifplugd(eth1)[3614]: Using interface eth1/00:0E:2E:72:46:7A with driver <8139too> (version: 0.9.28) Jun 18 10:03:15 shelld ifplugd(eth1)[3614]: Using detection mode: SIOCETHTOOL Jun 18 10:03:15 shelld ifplugd(eth1)[3614]: Initialization complete, link beat detected. Jun 18 10:03:15 shelld ifplugd(eth1)[3614]: Executing '/etc/ifplugd/ifplugd.action eth1 up'. Jun 18 10:03:18 shelld kernel: fuse init (API version 7.9) Jun 18 10:03:18 shelld NET[4196]: /etc/sysconfig/network-scripts/ifup-post : updated /etc/resolv.conf Jun 18 10:03:19 shelld NET[4212]: /etc/sysconfig/network-scripts/ifup-post : updated /etc/resolv.conf Jun 18 10:03:19 shelld ifplugd(eth0)[3559]: Program executed successfully. Jun 18 10:03:19 shelld ifplugd(eth1)[3614]: Program executed successfully. Jun 18 10:03:19 shelld kernel: eth0: Setting full-duplex based on MII#1 link partner capability of 45e1. Jun 18 10:03:19 shelld dhcpd: Not searching LDAP since ldap-server, ldap-port and ldap-base-dn were not specified in the config file Jun 18 10:03:19 shelld avahi-daemon[4296]: Found user 'avahi' (UID 71) and group 'avahi' (GID 71). Jun 18 10:03:19 shelld dhcpd: Wrote 16 leases to leases file. Jun 18 10:03:19 shelld rpcbind: cannot bind * on udp6: Address already in use Jun 18 10:03:19 shelld rpcbind: cannot bind tcp6: Address already in use Jun 18 10:03:19 shelld avahi-daemon[4296]: Successfully dropped root privileges. Jun 18 10:03:19 shelld avahi-daemon[4296]: avahi-daemon 0.6.22 starting up. Jun 18 10:03:19 shelld avahi-daemon[4296]: dbus_bus_get_private(): Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory Jun 18 10:03:19 shelld avahi-daemon[4296]: WARNING: Failed to contact D-Bus daemon. Jun 18 10:03:19 shelld kdm_config[4302]: XDMCP ACL: unresolved host 'CHOOSER' Jun 18 10:03:19 shelld kdm_config[4302]: XDMCP ACL: unresolved host 'CHOOSER' Jun 18 10:03:19 shelld rpc.statd[4374]: Version 1.1.1 Starting Jun 18 10:03:19 shelld sshd[4377]: Server listening on :: port 22. Jun 18 10:03:22 shelld sshd[4377]: error: Bind to port 22 on 0.0.0.0 failed: Address already in use. Jun 18 10:03:23 shelld kernel: Netfilter messages via NETLINK v0.30. Jun 18 10:03:23 shelld kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max) Jun 18 10:03:23 shelld kernel: ip6_tables: © 2000-2006 Netfilter Core Team Jun 18 10:03:23 shelld kernel: ctnetlink v0.93: registering with nfnetlink. Jun 18 10:03:23 shelld saslauthd[4368]: detach_tty : master pid is: 4368 Jun 18 10:03:23 shelld saslauthd[4368]: ipc_init : listening on socket: /var/lib/sasl2/mux Jun 18 10:03:23 shelld kernel: ClusterIP Version 0.8 loaded successfully Jun 18 10:03:24 shelld kernel: fglrx: module license 'Proprietary. © 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. Jun 18 10:03:24 shelld kernel: [fglrx] Maximum main memory to use for locked dma buffers: 3797 MBytes. Jun 18 10:03:24 shelld kernel: [fglrx] ASYNCIO init succeed! Jun 18 10:03:24 shelld kernel: [fglrx] PAT is enabled successfully! Jun 18 10:03:24 shelld kernel: [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0 Jun 18 10:03:24 shelld kernel: RPC: Registered udp transport module. Jun 18 10:03:24 shelld kernel: RPC: Registered tcp transport module. Jun 18 10:03:25 shelld kernel: netfilter PSD loaded - © astaro AG Jun 18 10:03:25 shelld kernel: IFWLOG: register target Jun 18 10:03:25 shelld kernel: [fglrx] Reserve Block - 0 offset = 0Xfffb000 length = 0X5000 Jun 18 10:03:25 shelld kernel: [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000 Jun 18 10:03:25 shelld kernel: [fglrx] Reserve Block - 2 offset = 0Xff7a000 length = 0X80000 Jun 18 10:03:25 shelld logger: Shorewall started Jun 18 10:03:25 shelld kernel: [fglrx] interrupt source 10000000 successfully enabled Jun 18 10:03:25 shelld kernel: [fglrx] enable ID = 0x00000006 Jun 18 10:03:25 shelld kernel: [fglrx] Receive enable interrupt message with irqEnableMask: 10000000 Jun 18 10:03:25 shelld kernel: [fglrx] interrupt source 60000001 successfully enabled Jun 18 10:03:25 shelld kernel: [fglrx] enable ID = 0x00000007 Jun 18 10:03:25 shelld kernel: [fglrx] Receive enable interrupt message with irqEnableMask: 60000001 Jun 18 10:03:25 shelld kernel: [fglrx] interrupt source 00000040 successfully enabled Jun 18 10:03:25 shelld kernel: [fglrx] enable ID = 0x00000008 Jun 18 10:03:25 shelld kernel: [fglrx] Receive enable interrupt message with irqEnableMask: 00000040 Jun 18 10:03:25 shelld kernel: [fglrx] interrupt source ff00002c successfully enabled Jun 18 10:03:25 shelld kernel: [fglrx] enable ID = 0x00000009 Jun 18 10:03:25 shelld kernel: [fglrx] Receive enable interrupt message with irqEnableMask: ff00002c Jun 18 10:03:25 shelld kernel: [fglrx] interrupt source ff00002d successfully enabled Jun 18 10:03:25 shelld kernel: [fglrx] enable ID = 0x0000000A Jun 18 10:03:25 shelld kernel: [fglrx] Receive enable interrupt message with irqEnableMask: ff00002d Jun 18 10:03:25 shelld kernel: [fglrx] interrupt source 20000400 successfully enabled Jun 18 10:03:25 shelld kernel: [fglrx] enable ID = 0x0000000B Jun 18 10:03:25 shelld kernel: [fglrx] Receive enable interrupt message with irqEnableMask: 20000400

пс. вот при установке пакета лс_сенсор был ребут

[lejak]

короче материнская плата сбойная.
вопрос решен