NX перестал подключаться (именно на этой машине(winxp))

Модераторы: dimbor, Модераторы разделов

andrewb
Сообщения: 9

NX перестал подключаться

Сообщение andrewb »

с любой другой winxp подключается нормально.

Долго думает на "negotiating link parameters", затем сообщение "connection timeout".
есть идеи?

Runlog:
[?? 16. ??? 11:34:17 2009]: path before convert: [C:\DOCUME~1\xxx\NX73F8~1/S-xxx-1000-233D44A1BC2CA2EC09643385D47130A8/options]
[?? 16. ??? 11:34:17 2009]: path after convert 1: [C:\DOCUME~1\xxx\NX73F8~1/S-xxx~1/options] [45] [260]
[?? 16. ??? 11:34:17 2009]: Starting nxcomp with options: 'NX> 299 Switch connection to: NX mode: encrypted options: nx/nx,options=/cygdrive/C/DOCUME~1/xxx/NX73F8~1/S-xxx~1/options:1000'.
[?? 16. ??? 11:34:17 2009]: NXFileMonitor::readData
[?? 16. ??? 11:34:17 2009]: NXFileMonitor: opened file: [C:\DOCUME~1\xxx\NX73F8~1\S-xxx-1000-233D44A1BC2CA2EC09643385D47130A8\session]
[?? 16. ??? 11:34:17 2009]: Proxy pid from session file is [4036]
[?? 16. ??? 11:34:17 2009]: Proxy pid from session file is [2396]
[?? 16. ??? 11:34:17 2009]: NXFileMonitor::readData
[?? 16. ??? 11:34:17 2009]: NXFileMonitor::readData
[?? 16. ??? 11:34:17 2009]: NXFileMonitor::readData
минуту повторы...
[?? 16. ??? 11:35:17 2009]: NXFileMonitor::readData
[?? 16. ??? 11:35:17 2009]: LoginDialog: SlotProxyTimeout
[?? 16. ??? 11:35:17 2009]: LoginDialog: stopAllTimers
[?? 16. ??? 11:35:17 2009]: LoginDialog: stopProgressTimer
[?? 16. ??? 11:35:17 2009]: printFatalError [Connection timeout]
[?? 16. ??? 11:35:17 2009]: KillAllComponents 00C8E468
[?? 16. ??? 11:35:17 2009]: LoginDialog: stopAllTimers
[?? 16. ??? 11:35:17 2009]: LoginDialog: stopProgressTimer
[?? 16. ??? 11:35:17 2009]: LoginDialog::killAllComponents() stopping NXProtoProxy
[?? 16. ??? 11:35:17 2009]: LoginDialog::killAllComponents() stopping NXProtoSSH
[?? 16. ??? 11:35:18 2009]: StopConnection called
[?? 16. ??? 11:35:18 2009]: nxssh closing
[?? 16. ??? 11:35:18 2009]: StopConnection called
[?? 16. ??? 11:35:18 2009]: LoginDialog::killAllComponents proxy pid: 2396
[?? 16. ??? 11:35:18 2009]: Utility::killProcess [2396]
[?? 16. ??? 11:35:18 2009]: path before convert: [D:\NX Client for Windows]
[?? 16. ??? 11:35:18 2009]: path after convert 1: [D:\NXCLIE~1] [11] [260]
[?? 16. ??? 11:35:18 2009]: NXProcessWin::launch command: [D:\NXCLIE~1\bin\nxkill.exe --kill --pid 2396 --signal 15 ]
[?? 16. ??? 11:35:18 2009]: NXProcessWin::launch success
[?? 16. ??? 11:35:18 2009]: NXProcessWin::StopProcess begin
[?? 16. ??? 11:35:18 2009]: NXProcessWin::kill pid=2396
[?? 16. ??? 11:35:18 2009]: Utility::killProcess [2396]
[?? 16. ??? 11:35:18 2009]: path before convert: [D:\NX Client for Windows]
[?? 16. ??? 11:35:18 2009]: path after convert 1: [D:\NXCLIE~1] [11] [260]
[?? 16. ??? 11:35:18 2009]: NXProcessWin::launch command: [D:\NXCLIE~1\bin\nxkill.exe --kill --pid 2396 --signal 15 ]
[?? 16. ??? 11:35:18 2009]: NXProcessWin::launch success
[?? 16. ??? 11:35:18 2009]: NXService::stop: command [--stop display --id 6D36BF3B80BFB2F82C095C4DB8E7A6A6]
[?? 16. ??? 11:35:18 2009]: NXService::run: params [--stop display --id 6D36BF3B80BFB2F82C095C4DB8E7A6A6]
[?? 16. ??? 11:35:18 2009]: path before convert: [C:\DOCUME~1\xxx\NX73F8~1/temp/872]
[?? 16. ??? 11:35:18 2009]: path after convert 1: [C:\DOCUME~1\xxx\NX73F8~1/temp/872] [37] [260]
[?? 16. ??? 11:35:18 2009]: path before convert: [C:\DOCUME~1\xxx\NX73F8~1/temp/872]
[?? 16. ??? 11:35:18 2009]: path after convert 1: [C:\DOCUME~1\xxx\NX73F8~1/temp/872] [37] [260]
[?? 16. ??? 11:35:18 2009]: NXService::run: redirOut=C:\DOCUME~1\xxx\NX73F8~1\temp\872\svclog
[?? 16. ??? 11:35:18 2009]: path before convert: [C:\DOCUME~1\xxx\NX73F8~1/temp/872]
[?? 16. ??? 11:35:18 2009]: path after convert 1: [C:\DOCUME~1\xxx\NX73F8~1/temp/872] [37] [260]
[?? 16. ??? 11:35:18 2009]: NXService::run: command [D:\NX Client for Windows\bin/nxservice.exe --stop display --id 6D36BF3B80BFB2F82C095C4DB8E7A6A6]
[?? 16. ??? 11:35:19 2009]: NXService::run: before waiting for process to end
[?? 16. ??? 11:35:19 2009]: NXService::run: after waiting for process to end
[?? 16. ??? 11:35:19 2009]: end of killAllComponents
[?? 16. ??? 11:35:19 2009]: LoginDialog::ShowConnectionStatus code=[267] str=[Connection timeout] error=[1]
[?? 16. ??? 11:35:19 2009]: ProgressDialog::printNxStatus: [Connection timeout]
[?? 16. ??? 11:35:19 2009]: Logfile path [C:\DOCUME~1\xxx\NX73F8~1/S-xxx-1000-233D44A1BC2CA2EC09643385D47130A8/session] exists.

sshlog:
NX> 1009 Session status: starting
NX> 710 Session status: running
NX> 1002 Commit
/usr/libexec/nx/nxserver: line 1190: 11342 Terminated sleep $AGENT_STARTUP_TIMEOUT
NX> 105 NX> 1006 Session status: running
bye
Bye
NX> 999 Bye
NX> 285 Identified internal connection
NX> 285 Using default mode encrypted
NX> 285 Identified options: nx/nx,options=/cygdrive/C/DOCUME~1/xxx/NX73F8~1/S-10AD~1/options:1000
NX> 280 Proxy opened with local: 7 remote: 8
NX> 285 Switching descriptors: 4 and: 5 to: 7

NX> 287 Redirected I/O to channel descriptors
NX> 280 Proxy in: 4 out: 5 transport in: 8 out: 8

здесь долго думает
NX> 596 Session startup failed.
NX> 1004 Error: NX Agent exited with exit status 1.
Can't open /var/lib/nxserver/db/running/sessionId{DB4F4CEC079E71320267A05E7D4EBCA4}: No such file or directory.
mv: cannot stat `/var/lib/nxserver/db/running/sessionId{DB4F4CEC079E71320267A05E7D4EBCA4}': No such file or directory
NX> 1006 Session status: closed
NX> 280 Exiting on signal: 15
Спасибо сказали:
Вернуться к началу
dimbor
Ведущий рубрики
Сообщения: 1572
Статус: Подвинутый участник

Re: NX перестал подключаться

Сообщение dimbor »

На сервере в логах что?
Спасибо сказали:
Вернуться к началу
andrewb
Сообщения: 9

Re: NX перестал подключаться

Сообщение andrewb »

dimbor писал(а): ↑
16.10.2009 19:45
На сервере в логах что?

NX_LOG_LEVEL = 7
все тоже самое что и при рабочем подключении, буковка в буковку,
кроме последних трех строчек:
"nxserver.log"
...
NX> 999 Bye
NX> 1004 Error: NX Agent exited with exit status 1.
NX> 1006 Session status: closed
NX> 596 Session startup failed.
Спасибо сказали:
Вернуться к началу
dimbor
Ведущий рубрики
Сообщения: 1572
Статус: Подвинутый участник

Re: NX перестал подключаться

Сообщение dimbor »

Предположение такое: nxagent и клиент валятся по таймауту плюс в виндовом логе нет заветных строчек
...
...[Initializing X protocol compression]
...
...[Established the display connection]

, следовательно nxwin мертв.

Варианты:
- был убит какой-нить сторожилкой при запуске.
- загашены файрволом его (цигвиновские) сокеты на localhost.
- свалился сам из-за своих внутренних проблем.

По таким данным можно только гадать, т.к. а) runlog неполный, без начала; б) не приведен (отсутствует???) winlog из D-каталога сессии, куда пишет nxwin.
Спасибо сказали:
Вернуться к началу
andrewb
Сообщения: 9

Re: NX перестал подключаться

Сообщение andrewb »

dimbor писал(а): ↑
17.10.2009 03:48
Предположение такое: nxagent и клиент валятся по таймауту плюс в виндовом логе нет заветных строчек
...
...[Initializing X protocol compression]
...
...[Established the display connection]

, следовательно nxwin мертв.

Варианты:
- был убит какой-нить сторожилкой при запуске.
- загашены файрволом его (цигвиновские) сокеты на localhost.
- свалился сам из-за своих внутренних проблем.

По таким данным можно только гадать, т.к. а) runlog неполный, без начала; б) не приведен (отсутствует???) winlog из D-каталога сессии, куда пишет nxwin.


что по таймауту я вижу:)

-сторожилки выискивал не нашел, чистки реестра,проверка лишних служб и т.п. не помогло
-файрвол не причем, я по по нему смотрю как NX успешно коннектится, можно отключить тоже самое.
-да но каких проблем?:)

runlog -

Код: Выделить всё

[?? 17. ??? 19:52:10 2009]: path before convert: [D:\NX Client for Windows]
[?? 17. ??? 19:52:10 2009]: path after convert 1: [D:\NXCLIE~1] [11] [260]
[?? 17. ??? 19:52:10 2009]: Setting environment variable 'NX_SYSTEM' to 'D:\NXCLIE~1'
[?? 17. ??? 19:52:10 2009]: Setting environment variable 'NX_ROOT' to 'C:\DOCUME~1\xxx\NX73F8~2'
[?? 17. ??? 19:52:10 2009]: path before convert: [C:\Documents and Settings\xxx]
[?? 17. ??? 19:52:10 2009]: path after convert 1: [C:\DOCUME~1\xxx] [19] [260]
[?? 17. ??? 19:52:10 2009]: Setting environment variable 'NX_HOME' to 'C:\DOCUME~1\xxx'
[?? 17. ??? 19:52:10 2009]: Starting font debug
Fixed font was set to: 'Courier New' size: '8'
And the result is: 'Courier New'
Setting default system font: 'MS Shell Dlg,8.3,-1,5,50,0,0,0,0,0'
Font was set to: 'MS Shell Dlg'
And the result is: 'MS Shell Dlg'
End of font debug


[?? 17. ??? 19:52:10 2009]: Starting NX Client version 3.4.0-5
[?? 17. ??? 19:52:10 2009]: qtrc: useXft read=1 value=1
qtrc: useXft is set to true
qtrc: enableXft read=1 value=1
qtrc: enableXft is set to true

[?? 17. ??? 19:52:10 2009]: Initializing the login dialog.
[?? 17. ??? 19:52:10 2009]: Config File Name set to: 'C:\Documents and Settings\xxx/.nx/config/nxclient.cfg'.
[?? 17. ??? 19:52:10 2009]: System NX dir set to: 'D:\NX Client for Windows'.
[?? 17. ??? 19:52:10 2009]: Personal NX dir set to: 'C:\DOCUME~1\xxx\NX73F8~2'.
[?? 17. ??? 19:52:10 2009]: creating SessionSettings=''
[?? 17. ??? 19:52:10 2009]: LoginDialog::loadConfigFiles - number of entries in config dir: 4
[?? 17. ??? 19:52:10 2009]: ComboSession::insertSession: '1' -> 'C:/DOCUME~1/xxx/NX73F8~2/config/1.nxs'
[?? 17. ??? 19:52:10 2009]: ComboSession::setCurrentSession: '1'
[?? 17. ??? 19:52:10 2009]: SessionSettings::loadFromFile('C:/DOCUME~1/xxx/NX73F8~2/config/1.nxs')
[?? 17. ??? 19:52:10 2009]: Utility::getPreferencesFile: 'nxclient' -> 'C:\Documents and Settings\xxx/.nx/config/nxclient.cfg'
[?? 17. ??? 19:52:10 2009]: ComboSession::setCurrentSession: '1'
[?? 17. ??? 19:52:10 2009]: SessionSettings::loadFromFile('C:/DOCUME~1/xxx/NX73F8~2/config/1.nxs')
[?? 17. ??? 19:52:10 2009]: LoginDialog: slotChangeSession [1]
[?? 17. ??? 19:52:10 2009]: LoginDialog: loadUserAndPassword
[?? 17. ??? 19:52:10 2009]: LoginDialog: loadUserAndPassword
[?? 17. ??? 19:52:10 2009]: Settings::flush
[?? 17. ??? 19:52:10 2009]: Settings::flush
[?? 17. ??? 19:52:10 2009]: LoginDialog: loadUserAndPassword
[?? 17. ??? 19:52:10 2009]: path before convert: [C:\Documents and Settings\xxx]
[?? 17. ??? 19:52:10 2009]: path after convert 1: [C:\DOCUME~1\xxx] [19] [260]
[?? 17. ??? 19:52:10 2009]: path before convert: [C:\DOCUME~1\xxx\NX73F8~2\temp]
[?? 17. ??? 19:52:10 2009]: path after convert 1: [C:\DOCUME~1\xxx\NX73F8~2\temp] [33] [260]
[?? 17. ??? 19:52:10 2009]: Setting environment variable 'NX_HOME' to 'C:\DOCUME~1\xxx'
[?? 17. ??? 19:52:10 2009]: Setting environment variable 'NX_ROOT' to 'C:\DOCUME~1\xxx\NX73F8~2'
[?? 17. ??? 19:52:10 2009]: path before convert: [D:\NX Client for Windows]
[?? 17. ??? 19:52:10 2009]: path after convert 1: [D:\NXCLIE~1] [11] [260]
[?? 17. ??? 19:52:10 2009]: Setting environment variable 'NX_SYSTEM' to 'D:\NXCLIE~1'
[?? 17. ??? 19:52:10 2009]: Setting environment variable 'NX_CLIENT' to 'D:\NX Client for Windows\nxclient.exe'
[?? 17. ??? 19:52:10 2009]: Trying the XAUTHORITY environment variable with value [].
[?? 17. ??? 19:52:10 2009]: path before convert: [C:\Documents and Settings\xxx]
[?? 17. ??? 19:52:10 2009]: path after convert 1: [C:\DOCUME~1\xxx] [19] [260]
[?? 17. ??? 19:52:10 2009]: Trying the default value [C:\DOCUME~1\xxx\.Xauthority].
[?? 17. ??? 19:52:10 2009]: Utility::getXAuthorityFilePath: C:\DOCUME~1\xxx\.Xauthority
[?? 17. ??? 19:52:10 2009]: Setting environment variable 'XAUTHORITY' to 'C:\DOCUME~1\xxx\.Xauthority'
[?? 17. ??? 19:52:11 2009]: Setting environment variable 'LD_LIBRARY_PATH' to 'D:\NX Client for Windows\bin'
[?? 17. ??? 19:52:11 2009]: Setting environment variable 'HOME' to 'C:\DOCUME~1\xxx'
[?? 17. ??? 19:52:11 2009]: Setting environment variable 'PATH' to 'C:\ResDLL;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\DA\FP2;C:\DA\FP26;C:\Program Files\Common Files\Autodesk Shared\;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;C:\Program Files\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files\Common Files\Teleca Shared;D:\NX Client for Windows\bin;D:\NX Client for Windows'
[?? 17. ??? 19:52:11 2009]: Setting environment variable 'NX_TEMP' to 'C:\DOCUME~1\xxx\NX73F8~2\temp'
[?? 17. ??? 19:52:11 2009]: Setting environment variable 'TEMP' to 'C:\DOCUME~1\xxx\NX73F8~2\temp'
[?? 17. ??? 19:52:11 2009]: Setting environment variable 'CYGWIN' to 'server'
[?? 17. ??? 19:52:11 2009]: Setting environment variable 'NX_VERSION' to '3.4.0'
[?? 17. ??? 19:52:11 2009]: NXService::run: params [--check]
[?? 17. ??? 19:52:11 2009]: path before convert: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836]
[?? 17. ??? 19:52:11 2009]: path after convert 1: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836] [38] [260]
[?? 17. ??? 19:52:11 2009]: path before convert: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836]
[?? 17. ??? 19:52:11 2009]: path after convert 1: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836] [38] [260]
[?? 17. ??? 19:52:11 2009]: NXService::run: redirOut=C:\DOCUME~1\xxx\NX73F8~2\temp\3836\svclog
[?? 17. ??? 19:52:11 2009]: path before convert: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836]
[?? 17. ??? 19:52:11 2009]: path after convert 1: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836] [38] [260]
[?? 17. ??? 19:52:11 2009]: NXService::run: command [D:\NX Client for Windows\bin/nxservice.exe --check]
[?? 17. ??? 19:52:11 2009]: NXService::run: before waiting for process to end
[?? 17. ??? 19:52:11 2009]: NXService::run: after waiting for process to end
[?? 17. ??? 19:52:11 2009]: path before convert: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836]
[?? 17. ??? 19:52:11 2009]: path after convert 1: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836] [38] [260]
[?? 17. ??? 19:52:11 2009]: LoginDialog: shared libraries environment ok
[?? 17. ??? 19:52:11 2009]: NXService::run: params [--cleanup]
[?? 17. ??? 19:52:11 2009]: path before convert: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836]
[?? 17. ??? 19:52:11 2009]: path after convert 1: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836] [38] [260]
[?? 17. ??? 19:52:11 2009]: path before convert: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836]
[?? 17. ??? 19:52:11 2009]: path after convert 1: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836] [38] [260]
[?? 17. ??? 19:52:11 2009]: NXService::run: redirOut=C:\DOCUME~1\xxx\NX73F8~2\temp\3836\svclog
[?? 17. ??? 19:52:11 2009]: path before convert: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836]
[?? 17. ??? 19:52:11 2009]: path after convert 1: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836] [38] [260]
[?? 17. ??? 19:52:11 2009]: NXService::run: command [D:\NX Client for Windows\bin/nxservice.exe --cleanup]
[?? 17. ??? 19:52:11 2009]: NXService::run: before waiting for process to end
[?? 17. ??? 19:52:11 2009]: NXService::run: after waiting for process to end
[?? 17. ??? 19:52:11 2009]: NXSession: getPidFromFile
[?? 17. ??? 19:52:11 2009]: NXSession: getPidFromFile - parsing session file: [Info: Proxy running in client mode with pid '888'.]
[?? 17. ??? 19:52:11 2009]: Display running with pid=[888] and handler=[]
[?? 17. ??? 19:52:11 2009]: NXSession: getPidFromFile - got pid: [888]
[?? 17. ??? 19:52:11 2009]: NXSession: getPidFromFile - parsing finished pid: [888]
[?? 17. ??? 19:52:11 2009]: NXSession: getHWnd
[?? 17. ??? 19:52:11 2009]: servicelog file opened
[?? 17. ??? 19:52:11 2009]: NXSession::getHWnd: got [Info: Display running with pid '2776' and handler '0x5801ee'.]
[?? 17. ??? 19:52:11 2009]: Display running with pid=[2776] and handler=[0x5801ee]
[?? 17. ??? 19:52:11 2009]: getHwnd + result = 0
[?? 17. ??? 19:52:12 2009]: NXSession: getPidFromFile returning [888]
[?? 17. ??? 19:52:12 2009]: SessionPid != 0 sending message sessionPid=888 005801EE
[?? 17. ??? 19:52:12 2009]: SendMessageTimeout returned [0]
[?? 17. ??? 19:52:12 2009]: SendMessageTimeout getLastError [0]
[?? 17. ??? 19:52:12 2009]: SendMessageTimeout lpdwResult [0]
[?? 17. ??? 19:52:12 2009]: path before convert: [D:\NX Client for Windows]
[?? 17. ??? 19:52:12 2009]: path after convert 1: [D:\NXCLIE~1] [11] [260]
[?? 17. ??? 19:52:12 2009]: Setting environment variable 'PATH' to 'C:\ResDLL;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\DA\FP2;C:\DA\FP26;C:\Program Files\Common Files\Autodesk Shared\;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;C:\Program Files\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files\Common Files\Teleca Shared;D:\NX Client for Windows\bin;D:\NX Client for Windows;D:\NXCLIE~1'
[?? 17. ??? 19:52:12 2009]: Main: createRegistryKeys: 'Software\Classes\NXClient.session' exists and have value: [NX Client for Windows session file]
[?? 17. ??? 19:52:12 2009]: Main: createRegistryKeys: 'Software\Classes\NXClient.session\DefaultIcon' exists and have value: [D:\NX Client for Windows\share\icons\nxclient-desktop.ico]
[?? 17. ??? 19:52:12 2009]: Main: createRegistryKeys: 'Software\Classes\NXClient.session\shell\open\command' exists and have value: ["D:\NX Client for Windows\nxclient.exe" --session "%1"]
[?? 17. ??? 19:52:12 2009]: Main: createRegistryKeys: 'Software\Classes\.nxs' exists and have value: [NXClient.session]
[?? 17. ??? 19:52:12 2009]: Main: createRegistryKeys: 'Software\Classes\.nxs' exists and have value of 'Content Type': [application/nx-session]
[?? 17. ??? 19:52:15 2009]: LoginDialog: login setupGui 1
[?? 17. ??? 19:52:15 2009]: path before convert: [C:\Documents and Settings\xxx]
[?? 17. ??? 19:52:15 2009]: path after convert 1: [C:\DOCUME~1\xxx] [19] [260]
[?? 17. ??? 19:52:15 2009]: path before convert: [C:\DOCUME~1\xxx\NX73F8~2\temp]
[?? 17. ??? 19:52:15 2009]: path after convert 1: [C:\DOCUME~1\xxx\NX73F8~2\temp] [33] [260]
[?? 17. ??? 19:52:15 2009]: Setting environment variable 'NX_HOME' to 'C:\DOCUME~1\xxx'
[?? 17. ??? 19:52:15 2009]: Setting environment variable 'NX_ROOT' to 'C:\DOCUME~1\xxx\NX73F8~2'
[?? 17. ??? 19:52:15 2009]: path before convert: [D:\NX Client for Windows]
[?? 17. ??? 19:52:15 2009]: path after convert 1: [D:\NXCLIE~1] [11] [260]
[?? 17. ??? 19:52:15 2009]: Setting environment variable 'NX_SYSTEM' to 'D:\NXCLIE~1'
[?? 17. ??? 19:52:15 2009]: Setting environment variable 'NX_CLIENT' to 'D:\NX Client for Windows\nxclient.exe'
[?? 17. ??? 19:52:15 2009]: Trying the XAUTHORITY environment variable with value [C:\DOCUME~1\xxx\.Xauthority].
[?? 17. ??? 19:52:15 2009]: Utility::getXAuthorityFilePath: C:\DOCUME~1\xxx\.Xauthority
[?? 17. ??? 19:52:15 2009]: Setting environment variable 'XAUTHORITY' to 'C:\DOCUME~1\xxx\.Xauthority'
[?? 17. ??? 19:52:15 2009]: Setting environment variable 'LD_LIBRARY_PATH' to 'D:\NX Client for Windows\bin'
[?? 17. ??? 19:52:15 2009]: Setting environment variable 'HOME' to 'C:\DOCUME~1\xxx'
[?? 17. ??? 19:52:15 2009]: Setting environment variable 'PATH' to 'C:\ResDLL;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\DA\FP2;C:\DA\FP26;C:\Program Files\Common Files\Autodesk Shared\;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;C:\Program Files\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files\Common Files\Teleca Shared;D:\NX Client for Windows\bin;D:\NX Client for Windows;D:\NXCLIE~1;D:\NX Client for Windows\bin;D:\NX Client for Windows'
[?? 17. ??? 19:52:15 2009]: Setting environment variable 'NX_TEMP' to 'C:\DOCUME~1\xxx\NX73F8~2\temp'
[?? 17. ??? 19:52:15 2009]: Setting environment variable 'TEMP' to 'C:\DOCUME~1\xxx\NX73F8~2\temp'
[?? 17. ??? 19:52:15 2009]: Setting environment variable 'CYGWIN' to 'server'
[?? 17. ??? 19:52:15 2009]: Setting environment variable 'NX_VERSION' to '3.4.0'
[?? 17. ??? 19:52:15 2009]: Setting environment variable 'HOME' to 'C:/DOCUME~1/xxx'
[?? 17. ??? 19:52:15 2009]: Trying to write the ssh key into [C:\DOCUME~1\xxx\NX73F8~2/temp/3836/keylog]
[?? 17. ??? 19:52:16 2009]: path before convert: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836/keylog]
[?? 17. ??? 19:52:16 2009]: path after convert 1: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836/keylog] [45] [260]
[?? 17. ??? 19:52:16 2009]: SSH key file path [C:\DOCUME~1\xxx\NX73F8~2/temp/3836/keylog]
[?? 17. ??? 19:52:16 2009]: Running nxssh protocol with version [3.4.0]
[?? 17. ??? 19:52:16 2009]: LoginDialog: startProgressTimer
[?? 17. ??? 19:52:16 2009]: LoginDialog::ShowConnectionStatus code=[240] str=[Setting up the environment] error=[0]
[?? 17. ??? 19:52:16 2009]: ProgressDialog::printNxStatus: [Setting up the environment]
[?? 17. ??? 19:52:16 2009]: LoginDialog: startProgressTimer
[?? 17. ??? 19:52:16 2009]: Showing progress dialog: Setting up the environment
[?? 17. ??? 19:52:16 2009]: Rootless mode not detected. We do not append '-multiwindow' parameter to nxwin command.
[?? 17. ??? 19:52:16 2009]: NXService::stop: command [--stop display --id ]
[?? 17. ??? 19:52:16 2009]: NXService::run: params [--stop display --id ]
[?? 17. ??? 19:52:16 2009]: path before convert: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836]
[?? 17. ??? 19:52:16 2009]: path after convert 1: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836] [38] [260]
[?? 17. ??? 19:52:16 2009]: path before convert: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836]
[?? 17. ??? 19:52:16 2009]: path after convert 1: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836] [38] [260]
[?? 17. ??? 19:52:16 2009]: NXService::run: redirOut=C:\DOCUME~1\xxx\NX73F8~2\temp\3836\svclog
[?? 17. ??? 19:52:16 2009]: path before convert: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836]
[?? 17. ??? 19:52:16 2009]: path after convert 1: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836] [38] [260]
[?? 17. ??? 19:52:16 2009]: NXService::run: command [D:\NX Client for Windows\bin/nxservice.exe --stop display --id ]
[?? 17. ??? 19:52:16 2009]: NXService::run: before waiting for process to end
[?? 17. ??? 19:52:16 2009]: NXService::run: after waiting for process to end
[?? 17. ??? 19:52:16 2009]: NXService::start command=--start display --name admin@212.77.130.132: --resolution 1018x676 --multiwindow 0 --nokeyhook
[?? 17. ??? 19:52:16 2009]: NXService::run: params [--start display --name admin@212.77.130.132: --resolution 1018x676 --multiwindow 0 --nokeyhook]
[?? 17. ??? 19:52:16 2009]: path before convert: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836]
[?? 17. ??? 19:52:16 2009]: path after convert 1: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836] [38] [260]
[?? 17. ??? 19:52:16 2009]: path before convert: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836]
[?? 17. ??? 19:52:16 2009]: path after convert 1: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836] [38] [260]
[?? 17. ??? 19:52:16 2009]: NXService::run: redirOut=C:\DOCUME~1\xxx\NX73F8~2\temp\3836\svclog
[?? 17. ??? 19:52:16 2009]: path before convert: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836]
[?? 17. ??? 19:52:16 2009]: path after convert 1: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836] [38] [260]
[?? 17. ??? 19:52:16 2009]: NXService::run: command [D:\NX Client for Windows\bin/nxservice.exe --start display --name admin@212.77.130.132: --resolution 1018x676 --multiwindow 0 --nokeyhook]
[?? 17. ??? 19:52:16 2009]: NXService::run: before waiting for process to end
[?? 17. ??? 19:52:19 2009]: NXService::run: after waiting for process to end
[?? 17. ??? 19:52:19 2009]: path before convert: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836]
[?? 17. ??? 19:52:19 2009]: path after convert 1: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836] [38] [260]
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got [NXSERVICE - is running]
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got [System::getRootDir]
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got [System::setRootDir]
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got [System::setRootDir: Set NX root directory to 'C:\DOCUME~1\xxx\NX73F8~2']
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got [System::getRootDir: Got NX root directory 'C:\DOCUME~1\xxx\NX73F8~2']
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got [Info::ServiceManager cleanup]
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got [Service::setupPaths filepath='C:\DOCUME~1\xxx\NX73F8~2/D-XXX-4BE9381FD48840CE1DE5424D850909C0']
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got [Service::setupPaths rootPath='C:\DOCUME~1\xxx\NX73F8~2/D-XXX-4BE9381FD48840CE1DE5424D850909C0']
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got [Info: renameDirectory: name='F-D-XXX-4BE9381FD48840CE1DE5424D850909C0']
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got []
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got [Info: Service name: display [Sat Oct 17 19:52:16 2009].]
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got [System::getRootDir]
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got [System::setRootDir]
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got [System::setRootDir: Set NX root directory to 'C:\DOCUME~1\xxx\NX73F8~2']
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got [System::getRootDir: Got NX root directory 'C:\DOCUME~1\xxx\NX73F8~2']
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got [Info::ServiceManager stop 'display']
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got [Error: id value empty]
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got []
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got [Info: Service name: display [Sat Oct 17 19:52:16 2009].]
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got [System::getRootDir]
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got [System::setRootDir]
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got [System::setRootDir: Set NX root directory to 'C:\DOCUME~1\xxx\NX73F8~2']
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got [System::getRootDir: Got NX root directory 'C:\DOCUME~1\xxx\NX73F8~2']
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got [Info: Service directory MD5 CE40D372B2296B937EC7FF37229873A9.]
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got [Info: Using directory: 'C:\DOCUME~1\xxx\NX73F8~2/D-XXX-CE40D372B2296B937EC7FF37229873A9']
[?? 17. ??? 19:52:19 2009]: path before convert: [C:\DOCUME~1\xxx\NX73F8~2/D-XXX-CE40D372B2296B937EC7FF37229873A9]
[?? 17. ??? 19:52:19 2009]: path after convert 1: [C:\DOCUME~1\xxx\NX73F8~2/D-PROG~1] [37] [260]
[?? 17. ??? 19:52:19 2009]: Setting environment variable 'NX_TEMP' to 'C:\DOCUME~1\xxx\NX73F8~2/D-PROG~1'
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got [Service::setupPaths filepath='C:\DOCUME~1\xxx\NX73F8~2/D-XXX-CE40D372B2296B937EC7FF37229873A9']
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got [Service::setupPaths rootPath='C:\DOCUME~1\xxx\NX73F8~2/D-XXX-CE40D372B2296B937EC7FF37229873A9']
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got [System::getSystemDir]
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got [System::setSystemDir]
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got [System::setSystemDir: Set NX system directory to 'D:\NXCLIE~1']
[?? 17. ??? 19:52:19 2009]: NXService::readParameters: got [System::getSystemDir: Got NX system directory 'D:\NXCLIE~1']
[?? 17. ??? 19:52:20 2009]: NXService::readParameters: got [Service::getFreePort: found port[6001]]
[?? 17. ??? 19:52:20 2009]: NXService::readParameters: got [Info: Going to retrieve a free UNIX display port.]
[?? 17. ??? 19:52:20 2009]: NXService::readParameters: got [Info: There is no server running on display [:0].]
[?? 17. ??? 19:52:20 2009]: NXService::readParameters: got [Info: Using display: 0]
[?? 17. ??? 19:52:20 2009]: NXService::readParameters: got [Info: Using authority file: /cygdrive/c/DOCUME~1/xxx/.Xauthority]
[?? 17. ??? 19:52:20 2009]: NXService::readParameters: got [Posix path=/cygdrive/d/NXCLIE~1/share/fonts/base path=D:\NXCLIE~1\share\fonts\base]
[?? 17. ??? 19:52:20 2009]: NXService::readParameters: got [Posix path=/cygdrive/d/NXCLIE~1/share/fonts/TTF path=D:\NXCLIE~1\share\fonts\TTF]
[?? 17. ??? 19:52:20 2009]: NXService::readParameters: got [Info: Using fontpath: /cygdrive/d/NXCLIE~1/share/fonts/base,/cygdrive/d/NXCLIE~1/share/fonts/TTF]
[?? 17. ??? 19:52:20 2009]: NXService::readParameters: got [Service::addArgument[0][D:\NXCLIE~1/bin/NXWin.exe]]
[?? 17. ??? 19:52:20 2009]: NXService::readParameters: got [Service::addArgument[1][-nowinkill]]
[?? 17. ??? 19:52:20 2009]: NXService::readParameters: got [Service::addArgument[2][-clipboard]]
[?? 17. ??? 19:52:20 2009]: NXService::readParameters: got [Service::addArgument[3][-noloadxkb]]
[?? 17. ??? 19:52:20 2009]: NXService::readParameters: got [Service::addArgument[4][-agent]]
[?? 17. ??? 19:52:20 2009]: NXService::readParameters: got [Service::addArgument[5][-hide]]
[?? 17. ??? 19:52:20 2009]: NXService::readParameters: got [Service::addArgument[6][-noreset]]
[?? 17. ??? 19:52:20 2009]: NXService::readParameters: got [Service::addArgument[7][-auth]]
[?? 17. ??? 19:52:20 2009]: NXService::readParameters: got [Service::addArgument[8][/cygdrive/c/DOCUME~1/xxx/.Xauthority]]
[?? 17. ??? 19:52:20 2009]: NXService::readParameters: got [Service::addArgument[9][-nolisten]]
[?? 17. ??? 19:52:20 2009]: NXService::readParameters: got [Service::addArgument[10][tcp]]
[?? 17. ??? 19:52:20 2009]: NXService::readParameters: got [Service::addArgument[11][-fp]]
[?? 17. ??? 19:52:20 2009]: NXService::readParameters: got [Service::addArgument[12][/cygdrive/d/NXCLIE~1/share/fonts/base,/cygdrive/d/NXCLIE~1/share/fonts/TTF]]
[?? 17. ??? 19:52:20 2009]: NXService::readParameters: got [Service::addArgument[13][-screen]]
[?? 17. ??? 19:52:20 2009]: NXService::readParameters: got [Service::addArgument[14][0]]
[?? 17. ??? 19:52:20 2009]: NXService::readParameters: got [Service::addArgument[15][1018x676]]
[?? 17. ??? 19:52:20 2009]: NXService::readParameters: got [Service::addArgument[16][-nokeyhook]]
[?? 17. ??? 19:52:20 2009]: NXService::readParameters: got [Service::addArgument[17][-name]]
[?? 17. ??? 19:52:20 2009]: NXService::readParameters: got [Service::addArgument[18][admin@212.77.130.132:]]
[?? 17. ??? 19:52:20 2009]: NXService::readParameters: got [Service::addArgument[19][:0]]
[?? 17. ??? 19:52:20 2009]: NXService::readParameters: got [Info: Starting daemon: 'CE40D372B2296B937EC7FF37229873A9']
[?? 17. ??? 19:52:20 2009]: Starting display status=0
[?? 17. ??? 19:52:20 2009]: path before convert: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836]
[?? 17. ??? 19:52:20 2009]: path after convert 1: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836] [38] [260]
[?? 17. ??? 19:52:20 2009]: NXService::getWin32DisplayHandler: begin
[?? 17. ??? 19:52:20 2009]: Trying to open the winlog file [C:\DOCUME~1\xxx\NX73F8~2/D-PROG~1\winlog]
[?? 17. ??? 19:52:20 2009]: NXService::getWin32DisplayHandler: got [Info: Display running with pid '4000' and handler '0x2b035a'.]
[?? 17. ??? 19:52:20 2009]: Display running with pid=[4000] and handler=[0x2b035a]
[?? 17. ??? 19:52:20 2009]: Setting environment variable 'NX_HANDLEPROXY' to '2b035a'
[?? 17. ??? 19:52:20 2009]: NXService::getWin32DisplayHandler: NX_HANDLEPROXY=2b035a
[?? 17. ??? 19:52:20 2009]: NXService::getWin32DisplayHandler: end
[?? 17. ??? 19:52:20 2009]: NXService::getDisplayNumber:
[?? 17. ??? 19:52:20 2009]: path before convert: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836]
[?? 17. ??? 19:52:20 2009]: path after convert 1: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836] [38] [260]
[?? 17. ??? 19:52:20 2009]: path before convert: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836]
[?? 17. ??? 19:52:20 2009]: path after convert 1: [C:\DOCUME~1\xxx\NX73F8~2/temp/3836] [38] [260]
[?? 17. ??? 19:52:20 2009]: LoginDialog::startNXWin: got random cookie, trying to add cookie to authfile.
[?? 17. ??? 19:52:20 2009]: path before convert: [D:\NX Client for Windows]
[?? 17. ??? 19:52:20 2009]: path after convert 1: [D:\NXCLIE~1] [11] [260]
[?? 17. ??? 19:52:20 2009]: Trying the XAUTHORITY environment variable with value [C:\DOCUME~1\xxx\.Xauthority].
[?? 17. ??? 19:52:20 2009]: Utility::getXAuthorityFilePath: C:\DOCUME~1\xxx\.Xauthority
[?? 17. ??? 19:52:20 2009]: Utility::addCookieToAuthFile: Starting nxauth [D:\NXCLIE~1/bin/nxauth -i -f C:\DOCUME~1\xxx\.Xauthority add XXX:0 MIT-MAGIC-COOKIE-1 8e2c71f129a9e0c21be2cb6a362b770a]
[?? 17. ??? 19:52:21 2009]: Trying the XAUTHORITY environment variable with value [C:\DOCUME~1\xxx\.Xauthority].
[?? 17. ??? 19:52:21 2009]: Utility::getXAuthorityFilePath: C:\DOCUME~1\xxx\.Xauthority
[?? 17. ??? 19:52:21 2009]: Utility::addCookieToAuthFile: Starting nxauth 2 [D:\NXCLIE~1/bin/nxauth -i -f C:\DOCUME~1\xxx\.Xauthority add unix:0 MIT-MAGIC-COOKIE-1 8e2c71f129a9e0c21be2cb6a362b770a]
[?? 17. ??? 19:52:21 2009]: Trying the XAUTHORITY environment variable with value [C:\DOCUME~1\xxx\.Xauthority].
[?? 17. ??? 19:52:21 2009]: Utility::getXAuthorityFilePath: C:\DOCUME~1\xxx\.Xauthority
[?? 17. ??? 19:52:21 2009]: LoginDialog::startNXWin: cookie added to authfile.
[?? 17. ??? 19:52:21 2009]: NXService::getWin32DisplayHandler: begin
[?? 17. ??? 19:52:21 2009]: Trying to open the winlog file [C:\DOCUME~1\xxx\NX73F8~2/D-PROG~1\winlog]
[?? 17. ??? 19:52:21 2009]: NXService::getWin32DisplayHandler: got [Info: Display running with pid '4000' and handler '0x2b035a'.]
[?? 17. ??? 19:52:21 2009]: Display running with pid=[4000] and handler=[0x2b035a]
[?? 17. ??? 19:52:21 2009]: Setting environment variable 'NX_HANDLEPROXY' to '2b035a'
[?? 17. ??? 19:52:21 2009]: NXService::getWin32DisplayHandler: NX_HANDLEPROXY=2b035a
[?? 17. ??? 19:52:21 2009]: NXService::getWin32DisplayHandler: end
[?? 17. ??? 19:52:21 2009]: Setting environment variable 'COMPUTERNAME' to 'XXX'
[?? 17. ??? 19:52:21 2009]: LoginDialog::ShowConnectionStatus code=[241] str=[Connecting to 212.77.130.132] error=[0]
[?? 17. ??? 19:52:21 2009]: ProgressDialog::printNxStatus: [Connecting to 212.77.130.132]
[?? 17. ??? 19:52:21 2009]: LoginDialog::connectHost() nxsshline=D:*****@212.77.130.132 -x -2 -4 -o 'RhostsAuthentication no' -o 'PasswordAuthentication no' -o 'RSAAuthentication no' -o 'RhostsRSAAuthentication no' -o 'PubkeyAuthentication yes' -P 10.16.10.100:3128 -B -E
[?? 17. ??? 19:52:21 2009]: NXProcessWin::StopProcess begin
[?? 17. ??? 19:52:21 2009]: NXProcessWin::StopProcess invalid handle!!!
[?? 17. ??? 19:52:21 2009]: Using NX_STDIN flag redirection for [nxssh] process
[?? 17. ??? 19:52:21 2009]: Using NX_STDOUT flag redirection for [nxssh] process
[?? 17. ??? 19:52:22 2009]: Using NX_STDERR flag redirection for [nxssh] process
[?? 17. ??? 19:52:22 2009]: SpawnProcess method has returned [1]
[?? 17. ??? 19:52:22 2009]: Process [nxssh] running with pid [596]
[?? 17. ??? 19:52:22 2009]: Received line from nxssh process [NX> 203 NXSSH running with pid: 1972] with code [203]
[?? 17. ??? 19:52:22 2009]: Received code[203]
[?? 17. ??? 19:52:22 2009]: NXProtocol: trying to read ssh pid from '1972' - read '1972'
[?? 17. ??? 19:52:22 2009]: Received line from nxssh process [NX> 285 Enabling check on switch command] with code [285]
[?? 17. ??? 19:52:22 2009]: Received code[285]
[?? 17. ??? 19:52:22 2009]: Received line from nxssh process [NX> 285 Enabling skip of SSH config files] with code [285]
[?? 17. ??? 19:52:22 2009]: Received code[285]
[?? 17. ??? 19:52:22 2009]: Received line from nxssh process [NX> 285 Setting the preferred NX options] with code [285]
[?? 17. ??? 19:52:22 2009]: Received code[285]
[?? 17. ??? 19:52:22 2009]: Received line from nxssh process [NX> 200 Connected to web proxy at address: 10.16.10.100 on port: 3128] with code [200]
[?? 17. ??? 19:52:22 2009]: Received code[200]
[?? 17. ??? 19:52:23 2009]: Received line from nxssh process [NX> 211 The authenticity of host '[212.77.130.132]:443 (<no hostip for proxy command>)' can't be established.] with code [211]
[?? 17. ??? 19:52:23 2009]: Received code[211]
[?? 17. ??? 19:52:23 2009]: Received line from nxssh process [RSA key fingerprint is 71:00:df:c0:e5:f1:1b:69:39:0d:f3:60:39:a5:f9:50.] with code [-1]
[?? 17. ??? 19:52:23 2009]: Received code[-1]
[?? 17. ??? 19:52:23 2009]: Received line from nxssh process [Are you sure you want to continue connecting (yes/no)?] with code [-1]
[?? 17. ??? 19:52:23 2009]: Received code[-1]
[?? 17. ??? 19:52:23 2009]: LoginDialog: stopAllTimers
[?? 17. ??? 19:52:23 2009]: LoginDialog: stopProgressTimer
[?? 17. ??? 19:52:47 2009]: LoginDialog: startProgressTimer
[?? 17. ??? 19:52:47 2009]: Received line from nxssh process [] with code [-1]
[?? 17. ??? 19:52:47 2009]: Received code[-1]
[?? 17. ??? 19:52:47 2009]: Received line from nxssh process [Warning: Permanently added '[212.77.130.132]:443,<no hostip for proxy command>' (RSA) to the list of known hosts.] with code [-1]
[?? 17. ??? 19:52:47 2009]: Received code[-1]
[?? 17. ??? 19:52:47 2009]: Received line from nxssh process [NX> 202 Authenticating user: nx] with code [202]
[?? 17. ??? 19:52:47 2009]: Received code[202]
[?? 17. ??? 19:52:47 2009]: LoginDialog::ShowConnectionStatus code=[242] str=[Connected to 212.77.130.132] error=[0]
[?? 17. ??? 19:52:47 2009]: ProgressDialog::printNxStatus: [Connected to 212.77.130.132]
[?? 17. ??? 19:52:47 2009]: Received line from nxssh process [NX> 208 Using auth method: publickey] with code [208]
[?? 17. ??? 19:52:47 2009]: Received code[208]
[?? 17. ??? 19:52:48 2009]: Received line from nxssh process [HELLO NXSERVER - Version 1.5.0-60 OS (GPL)] with code [1000]
[?? 17. ??? 19:52:48 2009]: Received code[1000]
[?? 17. ??? 19:52:48 2009]: Received line from nxssh process [NX> 105] with code [105]
[?? 17. ??? 19:52:48 2009]: Received code[105]
[?? 17. ??? 19:52:48 2009]: Received line from nxssh process [hello NXCLIENT - Version 1.5.0] with code [-1]
[?? 17. ??? 19:52:48 2009]: Received code[-1]
[?? 17. ??? 19:52:48 2009]: Received line from nxssh process [NX> 134 Accepted protocol: 1.5.0] with code [134]
[?? 17. ??? 19:52:48 2009]: Received code[134]
[?? 17. ??? 19:52:48 2009]: Received line from nxssh process [NX> 105 SET SHELL_MODE SHELL] with code [105]
[?? 17. ??? 19:52:48 2009]: Received code[105]
[?? 17. ??? 19:52:48 2009]: Received line from nxssh process [NX> 105 SET AUTH_MODE PASSWORD] with code [105]
[?? 17. ??? 19:52:48 2009]: Received code[105]
[?? 17. ??? 19:52:48 2009]: Received line from nxssh process [NX> 105 login] with code [105]
[?? 17. ??? 19:52:48 2009]: Received code[105]
[?? 17. ??? 19:52:48 2009]: Received line from nxssh process [NX> 101 User:] with code [101]
[?? 17. ??? 19:52:48 2009]: Received code[101]
[?? 17. ??? 19:52:48 2009]: LoginDialog::ShowConnectionStatus code=[243] str=[Waiting authentication] error=[0]
[?? 17. ??? 19:52:48 2009]: ProgressDialog::printNxStatus: [Waiting authentication]
[?? 17. ??? 19:52:48 2009]: Received line from nxssh process [admin] with code [-1]
[?? 17. ??? 19:52:48 2009]: Received code[-1]
[?? 17. ??? 19:52:48 2009]: Received line from nxssh process [NX> 102 Password:] with code [102]
[?? 17. ??? 19:52:48 2009]: Received code[102]
[?? 17. ??? 19:52:48 2009]: Received line from nxssh process [] with code [-1]
[?? 17. ??? 19:52:48 2009]: Received code[-1]
[?? 17. ??? 19:52:51 2009]: Received line from nxssh process [NX> 103 Welcome to: xxx1c user: admin] with code [103]
[?? 17. ??? 19:52:51 2009]: Received code[103]
[?? 17. ??? 19:52:51 2009]: LoginDialog::ShowConnectionStatus code=[244] str=[Authentication completed] error=[0]
[?? 17. ??? 19:52:51 2009]: ProgressDialog::printNxStatus: [Authentication completed]
[?? 17. ??? 19:52:51 2009]: Settings::flush
[?? 17. ??? 19:52:51 2009]: Settings::flush
[?? 17. ??? 19:52:51 2009]: LoginDialog: runningInExistingProxy called
[?? 17. ??? 19:52:51 2009]: LoginDialog: customUnixSession is [0], virtualDesktop is [0]
[?? 17. ??? 19:52:51 2009]: LoginDialog: runningInExistingProxy returns sessionID = []
[?? 17. ??? 19:52:51 2009]: Received line from nxssh process [NX> 105] with code [105]
[?? 17. ??? 19:52:52 2009]: Received code[105]
[?? 17. ??? 19:52:52 2009]: Received line from nxssh process [listsession --user="admin" --status="suspended,running" --geometry="1024x768x16+render" --type="unix-kde"] with code [-1]
[?? 17. ??? 19:52:52 2009]: Received code[-1]
[?? 17. ??? 19:52:52 2009]: Received line from nxssh process [NX> 127 Sessions list of user 'admin' for reconnect:] with code [127]
[?? 17. ??? 19:52:52 2009]: Received code[127]
[?? 17. ??? 19:52:52 2009]: LoginDialog::ShowConnectionStatus code=[285] str=[Downloading the session information] error=[0]
[?? 17. ??? 19:52:52 2009]: ProgressDialog::printNxStatus: [Downloading the session information]
[?? 17. ??? 19:52:52 2009]: Received line from nxssh process [] with code [-1]
[?? 17. ??? 19:52:52 2009]: Received code[-1]
[?? 17. ??? 19:52:52 2009]: Received line from nxssh process [Display Type             Session ID                       Options  Depth Screen         Status      Session Name] with code [-1]
[?? 17. ??? 19:52:52 2009]: Received code[-1]
[?? 17. ??? 19:52:52 2009]: Received line from nxssh process [------- ---------------- -------------------------------- -------- ----- -------------- ----------- ------------------------------] with code [-1]
[?? 17. ??? 19:52:52 2009]: Received code[-1]
[?? 17. ??? 19:52:52 2009]: Received line from nxssh process [] with code [-1]
[?? 17. ??? 19:52:52 2009]: Received code[-1]
[?? 17. ??? 19:52:52 2009]: Received line from nxssh process [] with code [-1]
[?? 17. ??? 19:52:52 2009]: Received code[-1]
[?? 17. ??? 19:52:52 2009]: Received line from nxssh process [NX> 148 Server capacity: not reached for user: admin] with code [148]
[?? 17. ??? 19:52:52 2009]: Received code[148]
[?? 17. ??? 19:52:52 2009]: LoginDialog: runningInExistingProxy called
[?? 17. ??? 19:52:52 2009]: LoginDialog: customUnixSession is [0], virtualDesktop is [0]
[?? 17. ??? 19:52:52 2009]: LoginDialog: runningInExistingProxy returns sessionID = []
[?? 17. ??? 19:52:52 2009]: LoginDialog: SlotListSessionMode: autoReconnect[0] settings->isAutomaticReconnect[1]
[?? 17. ??? 19:52:52 2009]: LoginDialog::createNewSession
[?? 17. ??? 19:52:52 2009]: Session name passed to LoginDialog::createStartSessionString is []
[?? 17. ??? 19:52:52 2009]: NX Server does not support host url encode
[?? 17. ??? 19:52:52 2009]: Parameters passed to NX server [  --link="modem" --backingstore="1" --encryption="1" --cache="16M" --images="64M" --media="0" --imagecompressionmethod="1" --imagecompressionlevel="0" --render="1" --session="1" --type="unix-kde" --geometry="1018x676" --kbtype="pc102/en_US"
]
[?? 17. ??? 19:52:52 2009]: Start automatically the session with the parameters [startsession  --link="modem" --backingstore="1" --encryption="1" --cache="16M" --images="64M" --media="0" --imagecompressionmethod="1" --imagecompressionlevel="0" --render="1" --session="1" --type="unix-kde" --geometry="1018x676" --kbtype="pc102/en_US" --screeninfo="1018x676x16+render"
]
[?? 17. ??? 19:52:52 2009]: Received line from nxssh process [NX> 105] with code [105]
[?? 17. ??? 19:52:52 2009]: Received code[105]
[?? 17. ??? 19:52:52 2009]: Received line from nxssh process [startsession  --link="modem" --backingstore="1" --encryption="1" --cache="16M" --images="64M" --media="0" --imagecompressionmethod="1" --imagecompressionlevel="0" --render="1" --session="1" --type="unix-kde" --geometry="1018x676" --kbtype="pc102/en_US" --screeninfo="1018x676x16+render"] with code [-1]
[?? 17. ??? 19:52:52 2009]: Received code[-1]
[?? 17. ??? 19:52:52 2009]: Received line from nxssh process [] with code [-1]
[?? 17. ??? 19:52:53 2009]: Received code[-1]
[?? 17. ??? 19:52:53 2009]: Received line from nxssh process [NX> 1000 NXNODE - Version 1.5.0-60 OS (GPL)] with code [1000]
[?? 17. ??? 19:52:53 2009]: Received code[1000]
[?? 17. ??? 19:52:53 2009]: Received line from nxssh process [NX> 700 Session id: xxx1c-1000-F79088980DDB55CA81DF68EB7AE13985] with code [700]
[?? 17. ??? 19:52:53 2009]: Received code[700]
[?? 17. ??? 19:52:53 2009]: Cleaning the all protocol flags
[?? 17. ??? 19:52:53 2009]: Received line from nxssh process [NX> 705 Session display: 1000] with code [705]
[?? 17. ??? 19:52:53 2009]: Received code[705]
[?? 17. ??? 19:52:53 2009]: Received line from nxssh process [NX> 703 Session type: unix-kde] with code [703]
[?? 17. ??? 19:52:53 2009]: Received code[703]
[?? 17. ??? 19:52:53 2009]: Received line from nxssh process [NX> 701 Proxy cookie: 694bf653199cbab70af04d23f5ebb8c0] with code [701]
[?? 17. ??? 19:52:53 2009]: Received code[701]
[?? 17. ??? 19:52:53 2009]: Received line from nxssh process [NX> 702 Proxy IP: 127.0.0.1] with code [702]
[?? 17. ??? 19:52:54 2009]: Received code[702]
[?? 17. ??? 19:52:54 2009]: Received line from nxssh process [NX> 706 Agent cookie: 694bf653199cbab70af04d23f5ebb8c0] with code [706]
[?? 17. ??? 19:52:54 2009]: Received code[706]
[?? 17. ??? 19:52:54 2009]: Received line from nxssh process [NX> 704 Session cache: unix-kde] with code [704]
[?? 17. ??? 19:52:54 2009]: Received code[704]
[?? 17. ??? 19:52:54 2009]: Received line from nxssh process [NX> 707 SSL tunneling: 1] with code [707]
[?? 17. ??? 19:52:54 2009]: Received code[707]
[?? 17. ??? 19:52:54 2009]: Received line from nxssh process [NX> 1009 Session status: starting] with code [1009]
[?? 17. ??? 19:52:54 2009]: Received code[1009]
[?? 17. ??? 19:52:54 2009]: Received line from nxssh process [NX> 710 Session status: running] with code [710]
[?? 17. ??? 19:52:54 2009]: Received code[710]
[?? 17. ??? 19:52:54 2009]: LoginDialog::launchMountOperation
[?? 17. ??? 19:52:54 2009]: Received line from nxssh process [NX> 1002 Commit] with code [1002]
[?? 17. ??? 19:52:54 2009]: Received code[1002]
[?? 17. ??? 19:52:54 2009]: Received line from nxssh process [/usr/libexec/nx/nxserver: line 1190: 23663 Terminated              sleep $AGENT_STARTUP_TIMEOUT] with code [-1]
[?? 17. ??? 19:52:54 2009]: Received code[-1]
[?? 17. ??? 19:52:54 2009]: Received line from nxssh process [NX> 105 NX> 1006 Session status: running] with code [105]
[?? 17. ??? 19:52:54 2009]: Received code[105]
[?? 17. ??? 19:52:54 2009]: Received line from nxssh process [bye] with code [-1]
[?? 17. ??? 19:52:54 2009]: Received code[-1]
[?? 17. ??? 19:52:54 2009]: Received line from nxssh process [Bye] with code [-1]
[?? 17. ??? 19:52:54 2009]: Received code[-1]
[?? 17. ??? 19:52:54 2009]: Received line from nxssh process [NX> 999 Bye] with code [999]
[?? 17. ??? 19:52:54 2009]: Received code[999]
[?? 17. ??? 19:52:54 2009]: LoginDialog: setEnvironmentForProxy
[?? 17. ??? 19:52:54 2009]: Utility::getProxyPidFromFile file C:\DOCUME~1\xxx\NX73F8~2/S-xxx1c-1000-F79088980DDB55CA81DF68EB7AE13985/session
[?? 17. ??? 19:52:54 2009]: Utility::getProxyPidFromFile returning [-1]
[?? 17. ??? 19:52:54 2009]: LoginDialog: storeHWnd writing session file: [C:\DOCUME~1\xxx\NX73F8~2/S-xxx1c-1000-F79088980DDB55CA81DF68EB7AE13985/session]
[?? 17. ??? 19:52:54 2009]: NXService::getWin32DisplayHandler: begin
[?? 17. ??? 19:52:54 2009]: Trying to open the winlog file [C:\DOCUME~1\xxx\NX73F8~2/D-PROG~1\winlog]
[?? 17. ??? 19:52:54 2009]: NXService::getWin32DisplayHandler: got [Info: Display running with pid '4000' and handler '0x2b035a'.]
[?? 17. ??? 19:52:54 2009]: Display running with pid=[4000] and handler=[0x2b035a]
[?? 17. ??? 19:52:54 2009]: Setting environment variable 'NX_HANDLEPROXY' to '2b035a'
[?? 17. ??? 19:52:54 2009]: NXService::getWin32DisplayHandler: NX_HANDLEPROXY=2b035a
[?? 17. ??? 19:52:54 2009]: NXService::getWin32DisplayHandler: end
[?? 17. ??? 19:52:54 2009]: Writing line: 'Info: Display running with pid '4000' and handler '0x2b035a'.
'
[?? 17. ??? 19:52:54 2009]: LoginDialog::ShowConnectionStatus code=[245] str=[Negotiating link parameters] error=[0]
[?? 17. ??? 19:52:54 2009]: ProgressDialog::printNxStatus: [Negotiating link parameters]
[?? 17. ??? 19:52:54 2009]: path before convert: [C:\DOCUME~1\xxx\NX73F8~2]
[?? 17. ??? 19:52:54 2009]: path after convert 1: [C:\DOCUME~1\xxx\NX73F8~2] [28] [260]
[?? 17. ??? 19:52:54 2009]: Writing: 'nx/nx,cookie=694bf653199cbab70af04d23f5ebb8c0,encryption=1,session=session,id=xxx1c-1000-F79088980DDB55CA81DF68EB7AE13985,display=:0:1000
' to 'C:\DOCUME~1\xxx\NX73F8~2/S-xxx1c-1000-F79088980DDB55CA81DF68EB7AE13985/options'
[?? 17. ??? 19:52:54 2009]: file='C:\DOCUME~1\xxx\NX73F8~2/S-xxx1c-1000-F79088980DDB55CA81DF68EB7AE13985/options'
[?? 17. ??? 19:52:54 2009]: path before convert: [C:\DOCUME~1\xxx\NX73F8~2/S-xxx1c-1000-F79088980DDB55CA81DF68EB7AE13985/options]
[?? 17. ??? 19:52:54 2009]: path after convert 1: [C:\DOCUME~1\xxx\NX73F8~2/S-XXX1~1/options] [45] [260]
[?? 17. ??? 19:52:54 2009]: Starting nxcomp with options: 'NX> 299 Switch connection to: NX mode: encrypted options: nx/nx,options=/cygdrive/C/DOCUME~1/xxx/NX73F8~2/S-XXX1~1/options:1000'.
[?? 17. ??? 19:52:55 2009]: NXFileMonitor::readData
[?? 17. ??? 19:52:55 2009]: NXFileMonitor: opened file: [C:\DOCUME~1\xxx\NX73F8~2\S-xxx1c-1000-F79088980DDB55CA81DF68EB7AE13985\session]
[?? 17. ??? 19:52:55 2009]: Proxy pid from session file is [4000]
[?? 17. ??? 19:52:55 2009]: NXFileMonitor::readData
[?? 17. ??? 19:52:55 2009]: NXFileMonitor::readData
[?? 17. ??? 19:52:55 2009]: Proxy pid from session file is [1972]
[?? 17. ??? 19:52:55 2009]: NXFileMonitor::readData
[?? 17. ??? 19:52:55 2009]: NXFileMonitor::readData
[?? 17. ??? 19:52:55 2009]: NXFileMonitor::readData
[?? 17. ??? 19:52:55 2009]: NXFileMonitor::readData
[?? 17. ??? 19:52:55 2009]: NXFileMonitor::readData
[?? 17. ??? 19:52:55 2009]: NXFileMonitor::readData


winlog-

Код: Выделить всё

nxwinOpenLogFile: Redirected the standard error to the log file.
nxwinOpenLogFile: NX_TEMP is set to [C:\DOCUME~1\xxx\NX73F8~2/D-xxx-CE40D372B2296B937EC7FF37229873A9].
nxwinOpenLogFile: Using log file [C:\DOCUME~1\xxx\NX73F8~2/D-xxx-CE40D372B2296B937EC7FF37229873A9/winlog].
ddxProcessArgument - Initializing default screens
winInitializeDefaultScreens - w 1024 h 768
winInitializeDefaultScreens - Returning
ddxProcessArgument - screen - Found ``WxD'' arg
_XSERVTransmkdir: Owner of C:\DOCUME~1\xxx\NX73F8~2/D-xxx-CE40D372B2296B937EC7FF37229873A9/.X11-unix should be set to root
(EE) Unable to locate/open config file
InitOutput - Error reading config file
winDetectSupportedEngines - Windows NT/2000/XP
winDetectSupportedEngines - DirectDraw installed
winDetectSupportedEngines - Allowing PrimaryDD
winDetectSupportedEngines - DirectDraw4 installed
winDetectSupportedEngines - Returning, supported engines 0000001f
InitOutput - g_iNumScreens: 1 iMaxConsecutiveScreen: 1
winSetEngine - Using Shadow DirectDraw NonLocking
winAdjustVideoModeShadowDDNL - Using Windows display depth of 16 bits per pixel
winCreateBoundingWindowWindowed - User w: 1018 h: 676
winCreateBoundingWindowWindowed - Current w: 1024 h: 768
winAdjustForAutoHide - Original WorkArea: 0 0 708 1024
winAdjustForAutoHide - Adjusted WorkArea: 0 0 708 1024
winCreateBoundingWindowWindowed - WindowClient w 1018 h 676 r 1018 l 0 b 676 t 0
winCreateBoundingWindowWindowed -  Returning
Info: Display running with pid '4000' and handler '0x2b035a'.
winFinishScreenInitFB - Device blending capability [0].
winCreatePrimarySurfaceShadowDDNL - Creating primary surface
winCreatePrimarySurfaceShadowDDNL - Created primary surface
winCreatePrimarySurfaceShadowDDNL - Attached clipper to primary surface
winAllocateFBShadowDDNL - lPitch: 2036
winAllocateFBShadowDDNL - Created shadow pitch: 2036
winAllocateFBShadowDDNL - Created shadow stride: 1018
winFinishScreenInitFB - Masks: 0000f800 000007e0 0000001f
winInitVisualsShadowDDNL - Masks 0000f800 000007e0 0000001f BPRGB 6 d 16 bpp 16
winCreateDefColormap - Deferring to fbCreateDefColormap ()
winFinishScreenInitFB starting winInitWM
winFinishScreenInitFB After winInitWM
color offset: b 5 0
winFinishScreenInitFB - returning
winScreenInit - returning
InitOutput - Returning.
error opening security policy file /usr/X11R6/lib/X11/xserver/SecurityPolicy
(EE) No primary keyboard configured
(==) Using compiletime defaults for keyboard
names.keymap=(null)Rules = "xfree86" Model = "pc101" Layout = "us" Variant = "(null)" Options = "(null)"
Couldn't load XKB keymap, falling back to pre-XKB keymap
winBlockHandler - Releasing pmServerStarted
winBlockHandler - pthread_mutex_unlock () returned
Dispatch: Exiting from the dispatcher with exception [2].
Спасибо сказали:
Вернуться к началу
dimbor
Ведущий рубрики
Сообщения: 1572
Статус: Подвинутый участник

Re: NX перестал подключаться

Сообщение dimbor »

Хм. Абсолютно вроде нормальные логи, почти как живые.
К вопросу о том, что может не понравиться nxwin-у.
[?? 17. ??? 19:52:53 2009]: Received line from nxssh process [NX> 1000 NXNODE - Version 1.5.0-60 OS (GPL)] with code [1000]

Афигеть! Столько вроде не живут. Текущая у freenx - 3.2.0. А версии клиентов на этой и других машинах идентичные?

Да еще и:
[?? 17. ??? 19:52:22 2009]: Received line from nxssh process [NX> 200 Connected to web proxy at address: 10.16.10.100 on port: 3128] with code [200]
[?? 17. ??? 19:52:22 2009]: Received code[200]
[?? 17. ??? 19:52:23 2009]: Received line from nxssh process [NX> 211 The authenticity of host '[212.77.130.132]:443 (<no hostip for proxy command>)' can't be established.] with code [211]
[?? 17. ??? 19:52:23 2009]: Received code[211]
[?? 17. ??? 19:52:23 2009]: Received line from nxssh process [RSA key fingerprint is 71:00:df:c0:e5:f1:1b:69:39:0d:f3:60:39:a5:f9:50.] with code [-1]
[?? 17. ??? 19:52:23 2009]: Received code[-1]
[?? 17. ??? 19:52:23 2009]: Received line from nxssh process [Are you sure you want to continue connecting (yes/no)?] with code [-1]
[?? 17. ??? 19:52:23 2009]: Received code[-1]
[?? 17. ??? 19:52:23 2009]: LoginDialog: stopAllTimers
[?? 17. ??? 19:52:23 2009]: LoginDialog: stopProgressTimer
[?? 17. ??? 19:52:47 2009]: LoginDialog: startProgressTimer
[?? 17. ??? 19:52:47 2009]: Received line from nxssh process [] with code [-1]
[?? 17. ??? 19:52:47 2009]: Received code[-1]
[?? 17. ??? 19:52:47 2009]: Received line from nxssh process [Warning: Permanently added '[212.77.130.132]:443,<no hostip for proxy command>' (RSA) to the list of known hosts.] with code [-1]

Это тоже не понял. Какие сложности однако. А напрямую никак? И что, при каждом сеансе known hosts дополняются?
Спасибо сказали:
Вернуться к началу

Вернуться в «Терминальные решения»