[решено]DVD-приводы и 8.0-RELEASE (Отвалились)

[Stashek]

День добрый!
После обновления системы пересборкой до 8.0-RELEASE отвалились установленные sata-DVD-приводы.
Подозреваю, что случилось это из-за nVidia nForce MCP73, используемой в системе. Ранее на 7.0-RELEASE также были проблемы с sata-устройствами.
Гугление положительного результата не дало.
Может, кто знает, как решить эту проблему?

[ivan2ksusr]

День добрый!
После обновления системы пересборкой до 8.0-RELEASE отвалились установленные sata-DVD-приводы.
Подозреваю, что случилось это из-за nVidia nForce MCP73, используемой в системе. Ранее на 7.0-RELEASE также были проблемы с sata-устройствами.
Гугление положительного результата не дало.
Может, кто знает, как решить эту проблему?

может для начала покажите что у вас творится? ну к примеру вывод команды dmesg хотя бы, а так же что в messages?

[Stashek]

Вот мой dmesg:

Код: Выделить всё

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE #0: Mon Nov 30 18:28:52 MSK 2009
    root@stashome.vrn.ru:/usr/obj/usr/src/sys/STAS
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium(R) Dual-Core  CPU      E5200  @ 2.50GHz (2499.96-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x10676  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFL
USH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 2147483648 (2048 MB)
avail memory = 2086690816 (1990 MB)
ACPI APIC Table: <022609 APIC1953>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <ACRSYS ACRPRDCT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of fefe0000, 200 (3) failed
acpi0: reservation of fefe1000, 1000 (3) failed
acpi0: reservation of fee01000, ff000 (3) failed
acpi0: reservation of fec00000, 1000 (3) failed
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 1.0 (no driver attached)
pci0: <memory, RAM> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
pci0: <memory, RAM> at device 1.3 (no driver attached)
pci0: <memory, RAM> at device 1.4 (no driver attached)
pci0: <memory, RAM> at device 1.5 (no driver attached)
pci0: <memory, RAM> at device 1.6 (no driver attached)
pci0: <memory, RAM> at device 2.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x4f00-0x4fff at device 3.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 3.1 (no driver attached)
pci0: <memory, RAM> at device 3.2 (no driver attached)
pci0: <processor> at device 3.3 (no driver attached)
pci0: <memory, RAM> at device 3.4 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xf9e7f000-0xf9e7ffff irq 22 at device 4.0 on pci0
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf9e7ec00-0xf9e7ecff irq 23 at device 4.1 on pci0
ehci0: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <EHCI (generic) USB 2.0 controller> on ehci0
atapci0: <nVidia nForce MCP73 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 8.0 on pc
i0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcm0: <Envy24HT audio (M-Audio Revolution 7.1)> port 0xdc00-0xdc1f,0xd880-0xd8ff irq 16 at device 5.0 on pci1
pcm0: [GIANT-LOCKED]
pcm0: [ITHREAD]
pcm0: system configuration
  SubVendorID: 0x1412, SubDeviceID: 0x3630
  XIN2 Clock Source: 49.152MHz(192kHz*256)
  MPU-401 UART(s) #: not implemented
  ADC #: 1
  DAC #: 4
  Multi-track converter type: I2S(with volume, 192KHz support, 24bit resolution, ID#0x0)
  S/PDIF(IN/OUT): 0/1 ID# 0x00
  GPIO(mask/dir/state): 0x3fff85/0x4000fa/0x400072
vr0: <VIA VT6105 Rhine III 10/100BaseTX> port 0xd400-0xd4ff mem 0xf9fffc00-0xf9fffcff irq 17 at device 6.0 on pci1
vr0: Quirks: 0x0
vr0: Revision: 0x8b
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:1e:58:a7:a5:02
vr0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci2: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> port 0xec00-0xec7f mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfa000000-0xfbffffff i
rq 18 at device 0.0 on pci2
nvidia0: <GeForce 9500 GS> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [GIANT-LOCKED]
nvidia0: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci4: <ACPI PCI bus> on pcib4
atapci1: <nVidia nForce MCP73 SATA300 controller> port 0xc480-0xc487,0xc400-0xc403,0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc0f mem 0xf9e7c000-0xf9e7dfff irq 20 at device 14.0 on pci0
atapci1: [ITHREAD]
atapci1: AHCI v1.10 controller with 4 3Gbps ports, PM supported
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci1
ata5: [ITHREAD]
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6184c1906004c19
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6184c1906004c19
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: parallel port not found.
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ad0: 114473MB <Seagate ST3120814A 2AAA> at ata0-master UDMA100
ugen0.1: <nVidia> at usbus0
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <nVidia> at usbus1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ad1: 39266MB <IC35L040AVVN07 0 VA2OAG0A> at ata0-slave UDMA100
GEOM: ad0s1: geometry does not match label (255h,63s != 16h,63s).
ad4: 1430799MB <Seagate ST31500341AS CC1H> at ata2-master SATA300
uhub0: 8 ports with 8 removable, self powered
SMP: AP CPU #1 Launched!
Root mount waiting for: usbus1
Root mount waiting for: usbus1
uhub1: 8 ports with 8 removable, self powered
Trying to mount root from ufs:/dev/ad0s1a
ugen0.2: <vendor 0x058f> at usbus0
umass0: <vendor 0x058f USB Reader, class 0/0, rev 1.10/1.00, addr 2> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x0000
warning: KLD '/boot/modules/linprocfs.ko' is newer than the linker.hints file
umass0:4:0:-1: Attached to scbus4
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): NOT READY csi:0,aa,55,40 asc:3a,0
(probe0:umass-sim0:0:0:0): Medium not present
(probe0:umass-sim0:0:0:0): Unretryable error
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0
(probe0:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:1): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:1): NOT READY csi:0,aa,55,40 asc:3a,0
(probe0:umass-sim0:0:0:1): Medium not present
(probe0:umass-sim0:0:0:1): Unretryable error
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device
da1: Attempt to query device size failed: NOT READY, Medium not present
(probe0:umass-sim0:0:0:2): TEST UNIT READY. CDB: 0 40 0 0 0 0
(probe0:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:2): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:2): NOT READY csi:0,aa,55,40 asc:3a,0
(probe0:umass-sim0:0:0:2): Medium not present
(probe0:umass-sim0:0:0:2): Unretryable error
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device
da2: 1.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
(probe0:umass-sim0:0:0:3): TEST UNIT READY. CDB: 0 60 0 0 0 0
(probe0:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:3): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:3): NOT READY csi:0,aa,55,40 asc:3a,0
(probe0:umass-sim0:0:0:3): Medium not present
(probe0:umass-sim0:0:0:3): Unretryable error
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device
da3: 1.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
tun0: link state changed to UP
d
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...5 4 3 3 0 0 0 done
All buffers synced.
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE #0: Tue Dec  1 09:53:21 MSK 2009
    stanislav@stashome.vrn.ru:/usr/obj/usr/src/sys/STAS
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium(R) Dual-Core  CPU      E5200  @ 2.50GHz (2499.96-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x10676  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFL
USH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 2147483648 (2048 MB)
avail memory = 2086690816 (1990 MB)
ACPI APIC Table: <022609 APIC1953>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <ACRSYS ACRPRDCT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of fefe0000, 200 (3) failed
acpi0: reservation of fefe1000, 1000 (3) failed
acpi0: reservation of fee01000, ff000 (3) failed
acpi0: reservation of fec00000, 1000 (3) failed
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 1.0 (no driver attached)
pci0: <memory, RAM> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
pci0: <memory, RAM> at device 1.3 (no driver attached)
pci0: <memory, RAM> at device 1.4 (no driver attached)
pci0: <memory, RAM> at device 1.5 (no driver attached)
pci0: <memory, RAM> at device 1.6 (no driver attached)
pci0: <memory, RAM> at device 2.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x4f00-0x4fff at device 3.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 3.1 (no driver attached)
pci0: <memory, RAM> at device 3.2 (no driver attached)
pci0: <processor> at device 3.3 (no driver attached)
pci0: <memory, RAM> at device 3.4 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xf9e7f000-0xf9e7ffff irq 22 at device 4.0 on pci0
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf9e7ec00-0xf9e7ecff irq 23 at device 4.1 on pci0
ehci0: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <EHCI (generic) USB 2.0 controller> on ehci0
atapci0: <nVidia nForce MCP73 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 8.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcm0: <Envy24HT audio (M-Audio Revolution 7.1)> port 0xdc00-0xdc1f,0xd880-0xd8ff irq 16 at device 5.0 on pci1
pcm0: [GIANT-LOCKED]
pcm0: [ITHREAD]
pcm0: system configuration
  SubVendorID: 0x1412, SubDeviceID: 0x3630
  XIN2 Clock Source: 49.152MHz(192kHz*256)
  MPU-401 UART(s) #: not implemented
  ADC #: 1
  DAC #: 4
  Multi-track converter type: I2S(with volume, 192KHz support, 24bit resolution, ID#0x0)
  S/PDIF(IN/OUT): 0/1 ID# 0x00
  GPIO(mask/dir/state): 0x3fff85/0x4000fa/0x400072
vr0: <VIA VT6105 Rhine III 10/100BaseTX> port 0xd400-0xd4ff mem 0xf9fffc00-0xf9fffcff irq 17 at device 6.0 on pci1
vr0: Quirks: 0x0
vr0: Revision: 0x8b
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:1e:58:a7:a5:02
vr0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci2: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> port 0xec00-0xec7f mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfa000000-0xfbffffff irq 18 at device 0.0 on pci2
nvidia0: <GeForce 9500 GS> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [GIANT-LOCKED]
nvidia0: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci4: <ACPI PCI bus> on pcib4
atapci1: <nVidia nForce MCP73 SATA300 controller> port 0xc480-0xc487,0xc400-0xc403,0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc0f mem 0xf9e7c000-0xf9e7dfff irq 20 at device 14.0 on pci0
atapci1: [ITHREAD]
atapci1: AHCI v1.10 controller with 4 3Gbps ports, PM supported
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci1
ata5: [ITHREAD]
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6184c1906004c19
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6184c1906004c19
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: parallel port not found.
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ad0: 114473MB <Seagate ST3120814A 2AAA> at ata0-master UDMA100
ugen0.1: <nVidia> at usbus0
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <nVidia> at usbus1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ad1: 39266MB <IC35L040AVVN07 0 VA2OAG0A> at ata0-slave UDMA100
GEOM: ad0s1: geometry does not match label (255h,63s != 16h,63s).
ad4: 1430799MB <Seagate ST31500341AS CC1H> at ata2-master SATA300
uhub0: 8 ports with 8 removable, self powered
SMP: AP CPU #1 Launched!
Root mount waiting for: usbus1
Root mount waiting for: usbus1
uhub1: 8 ports with 8 removable, self powered
Trying to mount root from ufs:/dev/ad0s1a
ugen0.2: <vendor 0x058f> at usbus0
umass0: <vendor 0x058f USB Reader, class 0/0, rev 1.10/1.00, addr 2> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x0000
warning: KLD '/boot/modules/linprocfs.ko' is newer than the linker.hints file
umass0:4:0:-1: Attached to scbus4
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): NOT READY csi:0,aa,55,40 asc:3a,0
(probe0:umass-sim0:0:0:0): Medium not present
(probe0:umass-sim0:0:0:0): Unretryable error
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0
(probe0:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:1): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:1): NOT READY csi:0,aa,55,40 asc:3a,0
(probe0:umass-sim0:0:0:1): Medium not present
(probe0:umass-sim0:0:0:1): Unretryable error
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
(probe0:umass-sim0:0:0:2): TEST UNIT READY. CDB: 0 40 0 0 0 0
(probe0:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:2): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:2): NOT READY csi:0,aa,55,40 asc:3a,0
(probe0:umass-sim0:0:0:2): Medium not present
(probe0:umass-sim0:0:0:2): Unretryable error
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device
da2: 1.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
(probe0:umass-sim0:0:0:3): TEST UNIT READY. CDB: 0 60 0 0 0 0
(probe0:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:3): SCSI Status: Check Condition
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device
da3: 1.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present

[AlexNT]

Скажите какие DVD приводы не видятся и название мат. платы своей. Может смогу попробовать проверить если найдется аналогичное оборудование...

[Stashek]

Скажите какие DVD приводы не видятся и название мат. платы своей. Может смогу попробовать проверить если найдется аналогичное оборудование...

День добрый!
Приводы:
acd0: DVDR <Optiarc DVD RW AD-7200S/1.0B> at ata4-master SATA150
acd1: DVDR <HL-DT-ST DVDRAM GH15F/EG00> at ata5-master SATA150
(сохранилось от 7.2),
материнская плата Acer MCP73PV. Компьютер у меня Acer Aspire M1641.

[Stashek]

После обновления системы до 8-STABLE по состоянию на 12.12.09 г. Приводы увиделись.
P.S. На свое письмо в рассылку freebsd-bugs@freebsd.org ответа так и не получил. Что-то втихаря пофиксили.