=sys-power/cpufreqd-2.1.1
Код: Выделить всё
# cpufreq-info
cpufrequtils 005: cpufreq-info (C) Dominik Brodowski 2004-2006
Report errors and bugs to cpufreq@vger.kernel.org, please.
analyzing CPU 0:
driver: p4-clockmod
CPUs which need to switch frequency at the same time: 0
hardware limits: 350 MHz - 2.80 GHz
available frequency steps: 350 MHz, 700 MHz, 1.05 GHz, 1.40 GHz, 1.75 GHz, 2.10 GHz, 2.45 GHz, 2.80 GHz
available cpufreq governors: ondemand, performance
current policy: frequency should be within 350 MHz and 1.40 GHz.
The governor "performance" may decide which speed to use
within this range.
current CPU frequency is 1.40 GHz (asserted by call to hardware).
cpufreq stats: 350 MHz:0.00%, 700 MHz:0.00%, 1.05 GHz:0.00%, 1.40 GHz:98.20%, 1.75 GHz:0.00%, 2.10 GHz:0.00%, 2.45 GHz:0.00%, 2.80 GHz:1.80% (5)cat /proc/cpuinfo
Код: Выделить всё
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 2.80GHz
stepping : 9
cpu MHz : 1400.000
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe pebs bts cid xtpr
bogomips : 2794.47
clflush size : 64
power management:cat /etc/cpufreqd.conf
Код: Выделить всё
[General]
pidfile=/var/run/cpufreqd.pid
poll_interval=2
verbosity=2
[/General]
[Profile]
name=cpu1
minfreq=0%
maxfreq=50%
policy=ondemand
[/Profile]
[Profile]
name=cpu2
minfreq=50%
maxfreq=100%
policy=ondemand
[/Profile]
[Rule]
name=cpu_1
cpu_interval=0-99
profile=cpu1
[/Rule]
[Rule]
name=cpu_2
cpu_interval=99-100
profile=cpu2
[/Rule]cat /usr/src/linux-2.6.31-gentoo-r6/.config | grep FREQ
Код: Выделить всё
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_CPUFREQ_NFORCE2 is not setВ чем может быть дело?
Решилось заменой policy=ondemand на policy=powersave в конфиге.