Для знакомства с Linux посоветовали mandrake 10.1 все вроде нормально но драйвера на Nvidia Geforce FX 5500 не ставяться. Я просмотрел много форумов но для своего случая решения не нашел.
Помогите пожалуйста!
Вот какая ошибка выходит:
-> Kernel module compilation complete.
ERROR: Unable to load the kernel module 'nvidia.ko'. This is most likely
because the kernel module was built using the wrong kernel source files.
Please make sure you have installed the kernel source files for your
kernel; on Red Hat Linux systems, for example, be sure you have the
'kernel-source' rpm installed. If you know the correct kernel source
files are installed, you may specify the kernel source path with the
'--kernel-source-path' commandline option.
-> Kernel module load error: insmod: error inserting './usr/src/nv/nvidia.ko':
-1 No such device
-> Kernel messages:
NVRM: [Plug & Play OS] should be set to NO
NVRM: [Assign IRQ to VGA] should be set to YES
nvidia: probe of 0000:01:00.0 failed with error -1
NVRM: The NVIDIA probe routine failed for 1 device(s).
NVRM: None of the NVIDIA graphics adapters were initialized!
mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x100000
cdrom: This disc doesn't have any tracks I recognize!
PCI: No IRQ known for interrupt pin A of device 0000:01:00.0. Please try
using pci=biosirq.
NVRM: Can't find an IRQ for your NVIDIA card!
NVRM: Please check your BIOS settings.
NVRM: [Plug & Play OS] should be set to NO
NVRM: [Assign IRQ to VGA] should be set to YES
nvidia: probe of 0000:01:00.0 failed with error -1
NVRM: The NVIDIA probe routine failed for 1 device(s).
NVRM: None of the NVIDIA graphics adapters were initialized!
ERROR: Installation has failed. Please see the file
'/var/log/nvidia-installer.log' for details. You may find suggestions
on fixing installation problems in the README available on the Linux
driver download page at www.nvidia.com.
Исходники ядра стоят, пробывал разные драйвера (6629,7167,7676)эффект тот же.
Помогите
