ATI Technologies Inc RV280 Radeon 9200 SE - compiz? (как найти драйвера под эту видеокарту и настроить compiz)

[katrinok]

видеокарта ATI Technologies Inc RV280 Radeon 9200 SE, Ubuntu 9.10. Визуальные эффекты не поддерживаются.
Перекопала много форумов, но ничего толком не нашла. Только то что эта проблемма у многих с такой видеокартой, а как ее решить не узрела. Помогите - если есть решение...
P.S. если похожая тема была, иожно перенаправить на нужную ветку

[blackdevil]

какой драйвер используется на данный момент? Что в glxinfo показывается? Пробовали создать xorg.conf и вписать туда руками Driver "ati" ?

[Atolstoy]

Карточка старая, вот и нет поддержки. А вот если поставить древний дистр, например Suse 10.0, то можно будет поставить и fglrx, тогда 3D будет.

[katrinok]

Карточка старая, вот и нет поддержки. А вот если поставить древний дистр, например Suse 10.0, то можно будет поставить и fglrx, тогда 3D будет.

И что все у кого такая видеокарта - "сидят" исключительно на старом дистре? Должны же быть и другие варианты или танцы с бубном

[blackdevil]

открытый драйвер вполне успешно работает на старых картах, как его активировать написано мной выше.

[katrinok]

какой драйвер используется на данный момент? Что в glxinfo показывается? Пробовали создать xorg.conf и вписать туда руками Driver "ati" ?

ati-driver-installer-8.28.8

Код: Выделить всё

katrin@katrin-desktop:~$ glxinfo
name of display: :0.0
display: :0  screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
    GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
    GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
    GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
    GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
    GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
    GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
    GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_SGI_make_current_read,
    GLX_SGI_swap_control, GLX_SGI_video_sync, GLX_SGIS_multisample,
    GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
OpenGL vendor string: Tungsten Graphics, Inc.
OpenGL renderer string: Mesa DRI R200 (RV280 5964) 20090101 AGP 4x x86/MMX+/3DNow!+/SSE TCL
OpenGL version string: 1.3 Mesa 7.6
OpenGL extensions:
    GL_ARB_draw_buffers, GL_ARB_imaging, GL_ARB_multisample,
    GL_ARB_multitexture, GL_ARB_point_parameters, GL_ARB_point_sprite,
    GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
    GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
    GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
    GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
    GL_ARB_texture_rectangle, GL_ARB_transpose_matrix,
    GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_window_pos,
    GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
    GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
    GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
    GL_EXT_compiled_vertex_array, GL_EXT_convolution, GL_EXT_copy_texture,
    GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_histogram,
    GL_EXT_multi_draw_arrays, GL_EXT_packed_depth_stencil,
    GL_EXT_packed_pixels, GL_EXT_point_parameters, GL_EXT_polygon_offset,
    GL_EXT_rescale_normal, GL_EXT_secondary_color,
    GL_EXT_separate_specular_color, GL_EXT_stencil_wrap, GL_EXT_subtexture,
    GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
    GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
    GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
    GL_EXT_texture_lod_bias, GL_EXT_texture_mirror_clamp,
    GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_vertex_array,
    GL_APPLE_packed_pixels, GL_ATI_blend_equation_separate,
    GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,
    GL_ATI_fragment_shader, GL_IBM_multimode_draw_arrays,
    GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
    GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
    GL_MESA_window_pos, GL_NV_blend_square, GL_NV_light_max_exponent,
    GL_NV_texture_rectangle, GL_NV_texgen_reflection, GL_OES_read_format,
    GL_SGI_color_matrix, GL_SGI_color_table, GL_SGIS_generate_mipmap,
    GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
    GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays

8 GLX Visuals
   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x21 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x22 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x6b 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x6c 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x6d 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x6e 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x6f 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x62 32 tc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 Ncon

8 GLXFBConfigs:
   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x63  0 tc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x64  0 tc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x65  0 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x66  0 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x67  0 dc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x68  0 dc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x69  0 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x6a  0 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow

xorg.conf - не существует, создается (открывается) пустым - что конкретно в нем надо писать?

[katrinok]

открытый драйвер вполне успешно работает на старых картах, как его активировать написано мной выше.

а можно конкретно где пальцем тыкнуть

[blackdevil]

ati-driver-installer-8.28.8 по идее не должен подходить. Или поддержка данной карточки из него выкинута, или он с новым xorg server не дружит. Лень проверять что за версия. Так что если что-то через него ставилось - надо это все вычистить.

direct rendering: Yes

по идее если есть рендеринг - все должно быть нормально с драйверами. Как Вы поняли что "эффекты не поддерживаются"?

а можно конкретно где пальцем тыкнуть

1) останавливаем иксы командой

Код: Выделить всё

sudo service gdm stop

2) логинимся в консоли и делаем

Код: Выделить всё

sudo Xorg - configure

3) благодаря пункту 2 в нашей домашней папке создается пример конфига, его копируем в /etc/X11/xorg.conf и читаем man xorg.conf или смотрим в гугле примеры конфигов на предмет строчки Driver "ati"

[katrinok]

. Как Вы поняли что "эффекты не поддерживаются"?

Система - параметры - внешний вид - визуальные эффекты - при переключении на стандарт получайю черный экран

[mikihan]

Странно, у меня Ubuntu 9.10 и RV280 [Radeon 9200], компиз нормально работает в режиме Стандарт .
Драверы никакие ставить не надо - всё из коробки (работает на свободных ati). Для начала загрузись с live-CD Ubuntu посмотри: компиз должен работать. Кстати если установлен проприетарный драйвер ATI, снеси его (с такими видеокартами он не работает, а вот свободный драйвер из-за него возможно и не работает)

[katrinok]

Дело в том что у меня сразу после установки Убунты получился черный экран и пришлось перевлючить в тот режим в котором нахожусь сейчас, что бы видеть рабочий стол...

[mikihan]

Дело в том что у меня сразу после установки Убунты получился черный экран и пришлось перевлючить в тот режим в котором нахожусь сейчас, что бы видеть рабочий стол...

Странно. А xorg.conf есть? Если есть покажи.

[katrinok]

Странно. А xorg.conf есть? Если есть покажи.

нашла только /usr/share/man/man5/xorg.conf.5.gz и там очень много текста. Может и не оно. Когда искала xorg.conf то вроде бі именно он открывался пустым через терминал, по причине его отсутствия в директории Х

Код: Выделить всё

.\" $XdotOrg: xserver/xorg/hw/xfree86/doc/man/xorg.conf.man.pre,v 1.7 2006/05/26 00:12:18 reed Exp $
.\" shorthand for double quote that works everywhere.
.ds q \N'34'
.TH xorg.conf 5 "xorg-server 1.6.4" "X Version 11"
.SH NAME
xorg.conf \- configuration File for Xorg X server
.SH INTRODUCTION
.B Xorg
supports several mechanisms for supplying/obtaining configuration and
run-time parameters: command line options, environment variables, the
xorg.conf configuration file, auto-detection, and fallback defaults.
When the same information is supplied in more than one way, the highest
precedence mechanism is used.  The list of mechanisms is ordered from
highest precedence to lowest.  Note that not all parameters can be
supplied via all methods.  The available command line options and
environment variables (and some defaults) are described in the Xserver(1)
and Xorg(1) manual pages.  Most configuration file parameters, with
their defaults, are described below.  Driver and module specific
configuration parameters are described in the relevant driver or module
manual page.
.SH DESCRIPTION
.B Xorg
uses a configuration file called
.I xorg.conf
for its initial setup.
This configuration file is searched for in the following places when the
server is started as a normal user:
.PP
.RS 4
.nf
.IR /etc/X11/ <cmdline>
.IR /usr/etc/X11/ <cmdline>
.IB /etc/X11/ $XORGCONFIG
.IB /usr/etc/X11/ $XORGCONFIG
.I /etc/X11/xorg.conf\-4
.I /etc/X11/xorg.conf
.I /etc/xorg.conf
.IR /usr/etc/X11/xorg.conf. <hostname>
.I /usr/etc/X11/xorg.conf\-4
.I /usr/etc/X11/xorg.conf
.IR /usr/lib/X11/xorg.conf. <hostname>
.I /usr/lib/X11/xorg.conf\-4
.I /usr/lib/X11/xorg.conf
.fi
.RE
.PP
where
.I <cmdline>
is a relative path (with no \(lq..\(rq components) specified with the
.B \-config
command line option,
.B $XORGCONFIG
is the relative path (with no \(lq..\(rq components) specified by that
environment variable, and
.I <hostname>
is the machine's hostname as reported by
.BR gethostname (3).
.PP
When the Xorg server is started by the \(lqroot\(rq user, the config file
search locations are as follows:
.PP
.RS 4
.nf
<cmdline>
.IR /etc/X11/ <cmdline>
.IR /usr/etc/X11/ <cmdline>
.B $XORGCONFIG
.IB /etc/X11/ $XORGCONFIG
.IB /usr/etc/X11/ $XORGCONFIG
.I /etc/X11/xorg.conf\-4
.I /etc/X11/xorg.conf
.I /etc/xorg.conf
.IR /usr/etc/X11/xorg.conf. <hostname>
.I /usr/etc/X11/xorg.conf\-4
.I /usr/etc/X11/xorg.conf
.IR /usr/lib/X11/xorg.conf. <hostname>
.I /usr/lib/X11/xorg.conf\-4
.I /usr/lib/X11/xorg.conf
.fi
.RE
.PP
where
.I <cmdline>
is the path specified with the
.B \-config
command line option (which may be absolute or relative),
.B $XORGCONFIG
is the path specified by that
environment variable (absolute or relative),
.B $HOME
is the path specified by that environment variable (usually the home
directory), and
.I <hostname>
is the machine's hostname as reported by
.BR gethostname (3).
.PP
The
.I xorg.conf
file is composed of a number of sections which may be present in any order.
Each section has the form:
.PP
.RS 4
.nf
.BI "Section  \*q" SectionName \*q
.RI "    " SectionEntry
    ...
.B EndSection
.fi
.RE
.PP
The section names are:
.PP
.RS 4
.nf
.BR "Files          " "File pathnames"
.BR "ServerFlags    " "Server flags"
.BR "Module         " "Dynamic module loading"
.BR "Extensions     " "Extension enabling"
.BR "InputDevice    " "Input device description"
.BR "Device         " "Graphics device description"
.BR "VideoAdaptor   " "Xv video adaptor description"
.BR "Monitor        " "Monitor description"
.BR "Modes          " "Video modes descriptions"
.BR "Screen         " "Screen configuration"
.BR "ServerLayout   " "Overall layout"
.BR "DRI            " "DRI\-specific configuration"
.BR "Vendor         " "Vendor\-specific configuration"
.fi
.RE
.PP
The following obsolete section names are still recognised for compatibility
purposes.
In new config files, the
.B InputDevice
section should be used instead.
.PP
.RS 4
.nf
.BR "Keyboard       " "Keyboard configuration"
.BR "Pointer        " "Pointer/mouse configuration"
.fi
.RE
.PP
The old
.B XInput
section is no longer recognised.
.PP
The
.B ServerLayout
sections are at the highest level.
They bind together the input and output devices that will be used in a session.
The input devices are described in the
.B InputDevice
sections.
Output devices usually consist of multiple independent components (e.g.,
a graphics board and a monitor).
These multiple components are bound together in the
.B Screen
sections, and it is these that are referenced by the
.B ServerLayout
section.
Each
.B Screen
section binds together a graphics board and a monitor.
The graphics boards are described in the
.B Device
sections, and the monitors are described in the
.B Monitor
sections.
.PP
Config file keywords are case\-insensitive, and \(lq_\(rq characters are
ignored.
Most strings (including
.B Option
names) are also case-insensitive, and insensitive to white space and
\(lq_\(rq characters.
.PP
Each config file entry usually takes up a single line in the file.  They
consist of a keyword, which is possibly followed by one or more arguments,
with the number and types of the arguments depending on the keyword.
The argument types are:
.PP
.RS 4
.nf
.BR "Integer     " "an integer number in decimal, hex or octal"
.BR "Real        " "a floating point number"
.BR "String      " "a string enclosed in double quote marks (\*q)"
.fi
.RE
.PP
Note: hex integer values must be prefixed with \(lq0x\(rq, and octal values
with \(lq0\(rq.
.PP
A special keyword called
.B Option
may be used to provide free\-form data to various components of the server.
The
.B Option
keyword takes either one or two string arguments.
The first is the option name, and the optional second argument is the
option value.
Some commonly used option value types include:
.PP
.RS 4
.nf
.BR "Integer     " "an integer number in decimal, hex or octal"
.BR "Real        " "a floating point number"
.BR "String      " "a sequence of characters"
.BR "Boolean     " "a boolean value (see below)"
.BR "Frequency   " "a frequency value (see below)"
.fi
.RE
.PP
Note that
.I all
.B Option
values, not just strings, must be enclosed in quotes.
.PP
Boolean options may optionally have a value specified.
When no value is specified, the option's value is
.BR TRUE .
The following boolean option values are recognised as
.BR TRUE :
.PP
.RS 4
.BR 1 ,
.BR on ,
.BR true ,
.B yes
.RE
.PP
and the following boolean option values are recognised as
.BR FALSE :
.PP
.RS 4
.BR 0 ,
.BR off ,
.BR false ,
.B no
.RE
.PP
If an option name is prefixed with
.RB \*q No \*q,
then the option value is negated.
.PP
Example: the following option entries are equivalent:
.PP
.RS 4
.nf
.B "Option \*qAccel\*q   \*qOff\*q"
.B "Option \*qNoAccel\*q"
.B "Option \*qNoAccel\*q \*qOn\*q"
.B "Option \*qAccel\*q   \*qfalse\*q"
.B "Option \*qAccel\*q   \*qno\*q"
.fi
.RE
.PP
Frequency option values consist of a real number that is optionally
followed by one of the following frequency units:
.PP
.RS 4
.BR Hz ,
.BR k ,
.BR kHz ,
.BR M ,
.B MHz
.RE
.PP
When the unit name is omitted, the correct units will be determined from
the value and the expectations of the appropriate range of the value.
It is recommended that the units always be specified when using frequency
option values to avoid any errors in determining the value.
.SH "FILES SECTION"
The
.B Files
section is used to specify some path names required by the server.
Some of these paths can also be set from the command line (see
.BR Xserver (1)
and
.BR Xorg (1)).
The command line settings override the values specified in the config
file.
The
.B Files
section is optional, as are all of the entries that may appear in it.
.PP
The entries that can appear in this section are:
.TP 7
.BI "FontPath \*q" path \*q
sets the search path for fonts.
This path is a comma separated list of font path elements which the Xorg
server searches for font databases.
Multiple
.B FontPath
entries may be specified, and they will be concatenated to build up the
fontpath used by the server.  Font path elements can be absolute
directory paths, catalogue directories or a font server identifier. The
formats of the later two are explained below:
.PP
.RS 7
Catalogue directories:
.PP
.RS 4
Catalogue directories can be specified using the prefix \fBcatalogue:\fR
before the directory name. The directory can then be populated with
symlinks pointing to the real font directories, using the following
syntax in the symlink name:
.PP
.RS 4
.IR <identifier> : [attribute]: pri= <priority>
.RE
.PP
where
.I <identifier>
is an alphanumeric identifier,
.I [attribute]
is an attribute which will be passed to the underlying FPE and
.I <priority>
is a number used to order the fontfile FPEs. Examples:
.PP
.RS 4
.nf
.I 75dpi:unscaled:pri=20  -> /usr/share/X11/fonts/75dpi
.I gscript:pri=60 -> /usr/share/fonts/default/ghostscript
.I misc:unscaled:pri=10 \-> /usr/share/X11/fonts/misc
.fi
.PP
.RE .RE .RE
.PP
.RS 7
Font server identifiers:
.PP
.RS 4
Font server identifiers have the form:
.RS 4
.PP
.IR <trans> / <hostname> : <port\-number>
.RE
.PP
where
.I <trans>
is the transport type to use to connect to the font server (e.g.,
.B unix
for UNIX\-domain sockets or
.B tcp
for a TCP/IP connection),
.I <hostname>
is the hostname of the machine running the font server, and
.I <port\-number>
is the port number that the font server is listening on (usually 7100).
.RE
.PP
When this entry is not specified in the config file, the server falls back
to the compiled\-in default font path, which contains the following
font path elements (which can be set inside a catalogue directory):
.PP
.RS 4
.nf
.I /usr/share/X11/fonts/misc/
.I /usr/share/X11/fonts/TTF/
.I /usr/share/X11/fonts/Type1/
.I /usr/share/X11/fonts/75dpi/
.I /usr/share/X11/fonts/100dpi/
.fi
.RE
.PP
The recommended font path contains the following font path elements:
.PP
.RS 4
.nf
.I /usr/share/X11/fonts/local/
.I /usr/share/X11/fonts/misc/
.I /usr/share/X11/fonts/75dpi/:unscaled
.I /usr/share/X11/fonts/100dpi/:unscaled
.I /usr/share/X11/fonts/Type1/
.I /usr/share/X11/fonts/75dpi/
.I /usr/share/X11/fonts/100dpi/
.fi
.RE
.PP
Font path elements that are found to be invalid are removed from the
font path when the server starts up.
.RE
.TP 7
.BI "ModulePath \*q" path \*q
sets the search path for loadable Xorg server modules.
This path is a comma separated list of directories which the Xorg server
searches for loadable modules loading in the order specified.
Multiple
.B ModulePath
entries may be specified, and they will be concatenated to build the
module search path used by the server.
.\" The LogFile keyword is not currently implemented
.ig
.TP 7
.BI "LogFile \*q" path \*q
sets the name of the Xorg server log file.
The default log file name is
.PP
.RS 11
.RI /var/log/Xorg. <n> .log
.RE
.PP
.RS 7
where
.I <n>
is the display number for the Xorg server.
..
.SH "SERVERFLAGS SECTION"
In addition to options specific to this section (described below), the
.B ServerFlags
section is used to specify some global
Xorg server options.
All of the entries in this section are
.BR Options ,
although for compatibility purposes some of the old style entries are
still recognised.
Those old style entries are not documented here, and using them is
discouraged.
The
.B ServerFlags
section is optional, as are the entries that may be specified in it.
.PP
.B Options
specified in this section (with the exception of the
.B \*qDefaultServerLayout\*q
.BR Option )
may be overridden by
.B Options
specified in the active
.B ServerLayout
section.
Options with command line equivalents are overridden when their command
line equivalent is used.
The options recognised by this section are:
.TP 7
.BI "Option \*qDefaultServerLayout\*q  \*q" layout\-id \*q
This specifies the default
.B ServerLayout
section to use in the absence of the
.B \-layout
command line option.
.TP 7
.BI "Option \*qNoTrapSignals\*q  \*q" boolean \*q
This prevents the Xorg server from trapping a range of unexpected fatal
signals and exiting cleanly.
Instead, the Xorg server will die and drop core where the fault occurred.
The default behaviour is for the Xorg server to exit cleanly, but still drop a
core file.
In general you never want to use this option unless you are debugging an Xorg
server problem and know how to deal with the consequences.
.TP 7
.BI "Option \*qDontVTSwitch\*q  \*q" boolean \*q
This disallows the use of the
.BI Ctrl+Alt+F n
sequence (where
.RI F n
refers to one of the numbered function keys).
That sequence is normally used to switch to another \*qvirtual terminal\*q
on operating systems that have this feature.
When this option is enabled, that key sequence has no special meaning and
is passed to clients.
Default: off.
.TP 7
.BI "Option \*qDontZap\*q  \*q" boolean \*q
This disallows the use of the
.B Terminate_Server
XKB action (usually on Ctrl+Alt+Backspace, depending on XKB options).
This action is normally used to terminate the Xorg server.
When this option is enabled, the action has no effect.
Default: off.
.TP 7
.BI "Option \*qDontZoom\*q  \*q" boolean \*q
This disallows the use of the
.B Ctrl+Alt+Keypad\-Plus
and
.B Ctrl+Alt+Keypad\-Minus
sequences.
These sequences allows you to switch between video modes.
When this option is enabled, those key sequences have no special meaning
and are passed to clients.
Default: off.
.TP 7
.BI "Option \*qDisableVidModeExtension\*q  \*q" boolean \*q
This disables the parts of the VidMode extension used by the xvidtune client
that can be used to change the video modes.
Default: the VidMode extension is enabled.
.TP 7
.BI "Option \*qAllowNonLocalXvidtune\*q  \*q" boolean \*q
This allows the xvidtune client (and other clients that use the VidMode
extension) to connect from another host.
Default: off.
.TP 7
.BI "Option \*qAllowMouseOpenFail\*q  \*q" boolean \*q
This allows the server to start up even if the mouse device can't be
opened/initialised.
Default: false.
.TP 7
.BI "Option \*qVTSysReq\*q  \*q" boolean \*q
enables the SYSV\-style VT switch sequence for non\-SYSV systems
which support VT switching.
This sequence is
.B Alt\-SysRq
followed by a function key
.RB ( Fn ).
This prevents the Xorg server trapping the
keys used for the default VT switch sequence, which means that clients can
access them.
Default: off.
.TP 7
.BI "Option \*qXkbDisable\*q \*q" boolean \*q
disable/enable the XKEYBOARD extension.
The \-kb command line option overrides this config file option.
Default: XKB is enabled.
.\" The following four options are "undocumented".
.ig
.TP 7
.BI "Option \*qPciProbe1\*q"
Use PCI probe method 1.
Default: set.
.TP 7
.BI "Option \*qPciProbe2\*q"
Use PCI probe method 2.
Default: not set.
.TP 7
.BI "Option \*qPciForceConfig1\*q"
Force the use PCI config type 1.
Default: not set.
.TP 7
.BI "Option \*qPciForceConfig2\*q"
Force the use PCI config type 2.
Default: not set.
..
.TP 7
.BI "Option \*qBlankTime\*q  \*q" time \*q
sets the inactivity timeout for the
.B blank
phase of the screensaver.
.I time
is in minutes.
This is equivalent to the Xorg server's
.B \-s
flag, and the value can be changed at run\-time with
.BR xset(1).
Default: 10 minutes.
.TP 7
.BI "Option \*qStandbyTime\*q  \*q" time \*q
sets the inactivity timeout for the
.B standby
phase of DPMS mode.
.I time
is in minutes, and the value can be changed at run\-time with
.BR xset(1).
Default: 20 minutes.
This is only suitable for VESA DPMS compatible monitors, and may not be
supported by all video drivers.
It is only enabled for screens that have the
.B \*qDPMS\*q
option set (see the MONITOR section below).
.TP 7
.BI "Option \*qSuspendTime\*q  \*q" time \*q
sets the inactivity timeout for the
.B suspend
phase of DPMS mode.
.I time
is in minutes, and the value can be changed at run\-time with
.BR xset(1).
Default: 30 minutes.
This is only suitable for VESA DPMS compatible monitors, and may not be
supported by all video drivers.
It is only enabled for screens that have the
.B \*qDPMS\*q
option set (see the MONITOR section below).
.TP 7
.BI "Option \*qOffTime\*q  \*q" time \*q
sets the inactivity timeout for the
.B off
phase of DPMS mode.
.I time
is in minutes, and the value can be changed at run\-time with
.BR xset(1).
Default: 40 minutes.
This is only suitable for VESA DPMS compatible monitors, and may not be
supported by all video drivers.
It is only enabled for screens that have the
.B \*qDPMS\*q
option set (see the MONITOR section below).
.TP 7
.BI "Option \*qPixmap\*q  \*q" bpp \*q
This sets the pixmap format to use for depth 24.
Allowed values for
.I bpp
are 24 and 32.
Default: 32 unless driver constraints don't allow this (which is rare).
Note: some clients don't behave well when this value is set to 24.
.TP 7
.BI "Option \*qPC98\*q  \*q" boolean \*q
Specify that the machine is a Japanese PC\-98 machine.
This should not be enabled for anything other than the Japanese\-specific
PC\-98 architecture.
Default: auto\-detected.
.\" Doubt this should be documented.
.ig
.TP 7
.BI "Option \*qEstimateSizesAggressively\*q  \*q" value \*q
This option affects the way that bus resource sizes are estimated.
Default: 0.
..
.TP 7
.BI "Option \*qNoPM\*q  \*q" boolean \*q
Disables something to do with power management events.
Default: PM enabled on platforms that support it.
.TP 7
.BI "Option \*qXinerama\*q  \*q" boolean \*q
enable or disable XINERAMA extension.
Default is disabled.
.TP 7
.BI "Option \*qHandleSpecialKeys\*q \*q" when \*q
This option controls when the server uses the builtin handler to process
special key combinations (such as
.BR Ctrl+Alt+Backspace ).
Normally the XKEYBOARD extension keymaps will provide mappings for each of
the special key combinations, so the builtin handler is not needed unless
the XKEYBOARD extension is disabled.
The value of
.I when
can be
.BR Always ,
.BR Never ,
or
.BR WhenNeeded .
Default: Use the builtin handler only if needed.
The server will scan the keymap for a mapping to the
.B Terminate
action and, if found, use XKEYBOARD for processing actions, otherwise
the builtin handler will be used.
.TP 7
.BI "Option \*qAIGLX\*q \*q" boolean \*q
enable or disable AIGLX. AIGLX is enabled by default.
.TP 7
.BI "Option \*qGlxVisuals\*q \*q" string \*q
This option controls how many GLX visuals the GLX modules sets up.
The default value is
.BR "typical" ,
which will setup up a typical subset of
the GLXFBConfigs provided by the driver as GLX visuals.  Other options are
.BR "minimal" ,
which will set up the minimal set allowed by the GLX specification and
.BR "all"
which will setup GLX visuals for all GLXFBConfigs.
.TP 7
.BI "Option \*qUseDefaultFontPath\*q \*q" boolean \*q
Include the default font path even if other paths are specified in
xorg.conf. If enabled, other font paths are included as well. Enabled by
default.
.TP 7
.BI "Option \*qIgnoreABI\*q \*q" boolean \*q
Allow modules built for a different, potentially incompatible version of
the X server to load. Disabled by default.
.TP 7
.BI "Option \*qAllowEmptyInput\*q \*q" boolean \*q
If enabled, don't add the standard keyboard and mouse drivers, if there are no
input devices in the config file.  Enabled by default if AutoAddDevices and
AutoEnableDevices is enabled, otherwise disabled.
If AllowEmptyInput is on, devices using the kbd, mouse or vmmouse driver are ignored.
.TP 7
.BI "Option \*qAutoAddDevices\*q \*q" boolean \*q
If this option is disabled, then no devices will be added from HAL events.
Enabled by default.
.TP 7
.BI "Option \*qAutoEnableDevices\*q \*q" boolean \*q
If this option is disabled, then the devices will be added (and the
DevicePresenceNotify event sent), but not enabled, thus leaving policy up
to the client.
Enabled by default.
.TP 7
.BI "Option \*qLog\*q \*q" string \*q
This option controls whether the log is flushed and/or synced to disk after
each message.
Possible values are
.B flush
or
.BR sync .
Unset by default.
.SH "MODULE SECTION"
The
.B Module
section is used to specify which Xorg server modules should be loaded.
This section is ignored when the Xorg server is built in static form.
The types of modules normally loaded in this section are Xorg server
extension modules, and font rasteriser modules.
Most other module types are loaded automatically when they are needed via
other mechanisms.
The
.B Module
section is optional, as are all of the entries that may be specified in
it.
.PP
Entries in this section may be in two forms.
The first and most commonly used form is an entry that uses the
.B Load
keyword, as described here:
.TP 7
.BI "Load  \*q" modulename \*q
This instructs the server to load the module called
.IR modulename .
The module name given should be the module's standard name, not the
module file name.
The standard name is case\-sensitive, and does not include the \(lqlib\(rq
prefix, or the \(lq.a\(rq, \(lq.o\(rq, or \(lq.so\(rq suffixes.
.PP
.RS 7
Example: the FreeType font rasteriser can be loaded with the following entry:
.PP
.RS 4
.B "Load \*qfreetype\*q"
.RE
.RE
.TP 7
.BI "Disable  \*q" modulename \*q
This instructs the server to not load the module called
.IR modulename .
Some modules are loaded by default in the server, and this overrides that
default. If a
.B Load
instruction is given for the same module, it overrides the
.B Disable
instruction and the module is loaded. The module name given should be the
module's standard name, not the module file name. As with the
.B Load
instruction, the standard name is case-sensitive, and does not include the
"lib" prefix, or the ".a", ".o", or ".so" suffixes.
.PP
The second form of entry is a
.BR SubSection,
with the subsection name being the module name, and the contents of the
.B SubSection
being
.B Options
that are passed to the module when it is loaded.
.PP
Example: the extmod module (which contains a miscellaneous group of
server extensions) can be loaded, with the XFree86\-DGA extension
disabled by using the following entry:
.PP
.RS 4
.nf
.B "SubSection \*qextmod\*q"
.B "   Option  \*qomit XFree86\-DGA\*q"
.B EndSubSection
.fi
.RE
.PP
Modules are searched for in each directory specified in the
.B ModulePath
search path, and in the drivers, input, extensions, fonts, and
internal subdirectories of each of those directories.
In addition to this, operating system specific subdirectories of all
the above are searched first if they exist.
.PP
To see what font and extension modules are available, check the contents
of the following directories:
.PP
.RS 4
.nf
/usr/lib/modules/fonts
/usr/lib/modules/extensions
.fi
.RE
.PP
The \(lqextmod\(rq, \(lqdbe\(rq, \(lqglx\(rq, and \(lqdri\(rq extension
modules are loaded automatically, unless disabled with \*qDisable\*q entries.
It is recommended
that at very least the \(lqextmod\(rq extension module be loaded.
If it isn't, some commonly used server extensions (like the SHAPE
extension) will not be available.
.SH "EXTENSIONS SECTION"
The
.B Extensions
section is used to specify which X11 protocol extensions should be enabled
or disabled.
The
.B Extensions
section is optional, as are all of the entries that may be specified in
it.
.PP
Entries in this section are listed as Option statements with the name of
the extension as the first argument, and a boolean value as the second.
The extension name is case\-sensitive, and matches the form shown in the output
of \*qXorg -extension ?\*q.
.PP
.RS 7
Example: the MIT-SHM extension can be disabled with the following entry:
.PP
.RS 4
.nf
.B "Section \*qExtensions\*q"
.B "    Option \*qMIT-SHM\*q \*qDisable\*q"
.B "EndSection"
.fi
.RE
.RE
.SH "INPUTDEVICE SECTION"
The config file may have multiple
.B InputDevice
sections.
There will normally be at least two: one for the core (primary) keyboard,
and one of the core pointer.
If either of these two is missing, a default configuration for the missing
ones will be used.
Currently the default configuration may not work as expected on all platforms.
.PP
.B InputDevice
sections have the following format:
.PP
.RS 4
.nf
.B  "Section \*qInputDevice\*q"
.BI "    Identifier \*q" name \*q
.BI "    Driver     \*q" inputdriver \*q
.I  "    options"
.I  "    ..."
.B  "EndSection"
.fi
.RE
.PP
The
.B Identifier
and
.B Driver
entries are required in all
.B InputDevice
sections.
All other entries are optional.
.PP
The
.B Identifier
entry specifies the unique name for this input device.
The
.B Driver
entry specifies the name of the driver to use for this input device.
When using the loadable server, the input driver module
.RI \*q inputdriver \*q
will be loaded for each active
.B InputDevice
section.
An
.B InputDevice
section is considered active if it is referenced by an active
.B ServerLayout
section, if it is referenced by the
.B \-keyboard
or
.B \-pointer
command line options, or if it is selected implicitly as the core pointer
or keyboard device in the absence of such explicit references.
The most commonly used input drivers are
.BR evdev (4)
on Linux systems, and
.BR kbd (4)
and
.BR mousedrv (4)
on other platforms.
.PP
In the absence of an explicitly specified core input device, the first
.B InputDevice
marked as
.B CorePointer
(or
.BR CoreKeyboard )
is used.
If there is no match there, the first
.B InputDevice
that uses the \(lqmouse\(rq (or \(lqkbd\(rq) driver is used.
The final fallback is to use built\-in default configurations.
.PP
.B InputDevice
sections recognise some driver\-independent
.BR Options ,
which are described here.
See the individual input driver manual pages for a description of the
device\-specific options.
.TP 7
.BI "Option \*qCorePointer\*q"
When this is set, the input device is installed as the core (primary)
pointer device.
There must be exactly one core pointer.
If this option is not set here, or in the
.B ServerLayout
section, or from the
.B \-pointer
command line option, then the first input device that is capable of
being used as a core pointer will be selected as the core pointer.
This option is implicitly set when the obsolete
.B Pointer
section is used.
.TP 7
.BI "Option \*qCoreKeyboard\*q"
When this is set, the input device is to be installed as the core
(primary) keyboard device.
There must be exactly one core keyboard.
If this option is not set here, in the
.B ServerLayout
section, or from the
.B \-keyboard
command line option, then the first input device that is capable of
being used as a core keyboard will be selected as the core keyboard.
This option is implicitly set when the obsolete
.B Keyboard
section is used.
.TP 7
.BI "Option \*qAlwaysCore\*q  \*q" boolean \*q
.TP 7
.BI "Option \*qSendCoreEvents\*q  \*q" boolean \*q
Both of these options are equivalent, and when enabled cause the
input device to always report core events.
This can be used, for example, to allow an additional pointer device to
generate core pointer events (like moving the cursor, etc).
.TP 4
.BI "Option \*qHistorySize\*q  \*q" number \*q
Sets the motion history size.
Default: 0.
.TP 7
.BI "Option \*qSendDragEvents\*q  \*q" boolean \*q
???
.SH "DEVICE SECTION"
The config file may have multiple
.B Device
sections.
There must be at least one, for the video card being used.
.PP
.B Device
sections have the following format:
.PP
.RS 4
.nf
.B  "Section \*qDevice\*q"
.BI "    Identifier \*q" name \*q
.BI "    Driver     \*q" driver \*q
.I  "    entries"
.I  "    ..."
.B  "EndSection"
.fi
.RE
.PP
The
.B Identifier
and
.B Driver
entries are required in all
.B Device
sections.  All other entries are optional.
.PP
The
.B Identifier
entry specifies the unique name for this graphics device.
The
.B Driver
entry specifies the name of the driver to use for this graphics device.
When using the loadable server, the driver module
.RI \*q driver \*q
will be loaded for each active
.B Device
section.
A
.B Device
section is considered active if it is referenced by an active
.B Screen
section.
.PP
.B Device
sections recognise some driver\-independent entries and
.BR Options ,
which are described here.
Not all drivers make use of these
driver\-independent entries, and many of those that do don't require them
to be specified because the information is auto\-detected.
See the individual graphics driver manual pages for further information
about this, and for a description of the device\-specific options.
Note that most of the
.B Options
listed here (but not the other entries) may be specified in the
.B Screen
section instead of here in the
.B Device
section.
.TP 7
.BI "BusID  \*q" bus\-id \*q
This specifies the bus location of the graphics card.
For PCI/AGP cards,
the
.I bus\-id
string has the form
.BI PCI: bus : device : function
(e.g., \(lqPCI:1:0:0\(rq might be appropriate for an AGP card).
This field is usually optional in single-head configurations when using
the primary graphics card.
In multi-head configurations, or when using a secondary graphics card in a
single-head configuration, this entry is mandatory.
Its main purpose is to make an unambiguous connection between the device
section and the hardware it is representing.
This information can usually be found by running the pciaccess tool
scanpci.
.TP 7
.BI "Screen  " number
This option is mandatory for cards where a single PCI entity can drive more
than one display (i.e., multiple CRTCs sharing a single graphics accelerator
and video memory).
One
.B Device
section is required for each head, and this
parameter determines which head each of the
.B Device
sections applies to.
The legal values of
.I number
range from 0 to one less than the total number of heads per entity.
Most drivers require that the primary screen (0) be present.
.TP 7
.BI "Chipset  \*q" chipset \*q
This usually optional entry specifies the chipset used on the graphics
board.
In most cases this entry is not required because the drivers will probe the
hardware to determine the chipset type.
Don't specify it unless the driver-specific documentation recommends that you
do.
.TP 7
.BI "Ramdac  \*q" ramdac\-type \*q
This optional entry specifies the type of RAMDAC used on the graphics
board.
This is only used by a few of the drivers, and in most cases it is not
required because the drivers will probe the hardware to determine the
RAMDAC type where possible.
Don't specify it unless the driver-specific documentation recommends that you
do.
.TP 7
.BI "DacSpeed  " speed
.TP 7
.BI "DacSpeed  " "speed\-8 speed\-16 speed\-24 speed\-32"
This optional entry specifies the RAMDAC speed rating (which is usually
printed on the RAMDAC chip).
The speed is in MHz.
When one value is given, it applies to all framebuffer pixel sizes.
When multiple values are given, they apply to the framebuffer pixel sizes
8, 16, 24 and 32 respectively.
This is not used by many drivers, and only needs to be specified when the
speed rating of the RAMDAC is different from the defaults built in to
driver, or when the driver can't auto-detect the correct defaults.
Don't specify it unless the driver-specific documentation recommends that you
do.
.TP 7
.BI "Clocks  " "clock ..."
specifies the pixel that are on your graphics board.
The clocks are in MHz, and may be specified as a floating point number.
The value is stored internally to the nearest kHz.
The ordering of the clocks is important.
It must match the order in which they are selected on the graphics board.
Multiple
.B Clocks
lines may be specified, and each is concatenated to form the list.
Most drivers do not use this entry, and it is only required for some older
boards with non-programmable clocks.
Don't specify this entry unless the driver-specific documentation explicitly
recommends that you do.
.TP
.BI "ClockChip  \*q" clockchip\-type \*q
This optional entry is used to specify the clock chip type on graphics
boards which have a programmable clock generator.
Only a few Xorg drivers support programmable clock chips.
For details, see the appropriate driver manual page.
.TP 7
.BI "VideoRam  " "mem"
This optional entry specifies the amount of video ram that is installed
on the graphics board.
This is measured in kBytes.
In most cases this is not required because the Xorg server probes
the graphics board to determine this quantity.
The driver-specific documentation should indicate when it might be needed.
.TP 7
.BI "BiosBase  " "baseaddress"
This optional entry specifies the base address of the video BIOS for
the VGA board.
This address is normally auto-detected, and should only be specified if the
driver-specific documentation recommends it.
.TP 7
.BI "MemBase  " "baseaddress"
This optional entry specifies the memory base address of a graphics
board's linear frame buffer.
This entry is not used by many drivers, and it should only be specified if
the driver-specific documentation recommends it.
.TP 7
.BI "IOBase  " "baseaddress"
This optional entry specifies the IO base address.
This entry is not used by many drivers, and it should only be specified if
the driver-specific documentation recommends it.
.TP 7
.BI "ChipID  " "id"
This optional entry specifies a numerical ID representing the chip type.
For PCI cards, it is usually the device ID.
This can be used to override the auto-detection, but that should only be done
when the driver-specific documentation recommends it.
.TP 7
.BI "ChipRev  " "rev"
This optional entry specifies the chip revision number.
This can be used to override the auto-detection, but that should only be done
when the driver-specific documentation recommends it.
.TP 7
.BI "TextClockFreq  " "freq"
This optional entry specifies the pixel clock frequency that is used
for the regular text mode.
The frequency is specified in MHz.
This is rarely used.
.TP 7
.BI "Option \*qModeDebug\*q \*q" boolean \*q
Enable printing of additional debugging information about modesetting to
the server log.
.ig
.TP 7
This optional entry allows an IRQ number to be specified.
..
.TP 7
.B Options
Option flags may be specified in the
.B Device
sections.
These include driver\-specific options and driver\-independent options.
The former are described in the driver\-specific documentation.
Some of the latter are described below in the section about the
.B Screen
section, and they may also be included here.

.SH "VIDEOADAPTOR SECTION"
Nobody wants to say how this works.
Maybe nobody knows ...

.SH "MONITOR SECTION"
The config file may have multiple
.B Monitor
sections.
There should normally be at least one, for the monitor being used,
but a default configuration will be created when one isn't specified.
.PP
.B Monitor
sections have the following format:
.PP
.RS 4
.nf
.B  "Section \*qMonitor\*q"
.BI "    Identifier \*q" name \*q
.I  "    entries"
.I  "    ..."
.B  "EndSection"
.fi
.RE
.PP
The only mandatory entry in a
.B Monitor
section is the
.B Identifier
entry.
.PP
The
.B Identifier
entry specifies the unique name for this monitor.
The
.B Monitor
section may be used to provide information about the specifications of the
monitor, monitor-specific
.BR Options ,
and information about the video modes to use with the monitor.
.PP
With RandR 1.2-enabled drivers, monitor sections may be tied to specific
outputs of the video card.  Using the name of the output defined by the video
driver plus the identifier of a monitor section, one associates a monitor
section with an output by adding an option to the Device section in the
following format:

.B Option \*qMonitor-outputname\*q \*qmonitorsection\*q

(for example,
.B Option \*qMonitor-VGA\*q \*qVGA monitor\*q
for a VGA output)
.PP
In the absence of specific association of monitor sections to outputs, if a
monitor section is present the server will associate it with an output to
preserve compatibility for previous single-head configurations.
.PP
Specifying video modes is optional because the server will use the DDC or other
information provided by the monitor to automatically configure the list of
modes available.
When modes are specified explicitly in the
.B Monitor
section (with the
.BR Modes ,
.BR ModeLine ,
or
.B UseModes
keywords), built-in modes with the same names are not included.
Built-in modes with different names are, however, still implicitly included,
when they meet the requirements of the monitor.
.PP
The entries that may be used in
.B Monitor
sections are described below.
.TP 7
.BI "VendorName  \*q" vendor \*q
This optional entry specifies the monitor's manufacturer.
.TP 7
.BI "ModelName  \*q" model \*q
This optional entry specifies the monitor's model.
.TP 7
.BI "HorizSync  " "horizsync\-range"
gives the range(s) of horizontal sync frequencies supported by the
monitor.
.I horizsync\-range
may be a comma separated list of either discrete values or ranges of
values.
A range of values is two values separated by a dash.
By default the values are in units of kHz.
They may be specified in MHz or Hz
if
.B MHz
or
.B Hz
is added to the end of the line.
The data given here is used by the Xorg server to determine if video
modes are within the specifications of the monitor.
This information should be available in the monitor's handbook.
If this entry is omitted, a default range of 28\-33kHz is used.
.TP 7
.BI "VertRefresh  " "vertrefresh\-range"
gives the range(s) of vertical refresh frequencies supported by the
monitor.
.I vertrefresh\-range
may be a comma separated list of either discrete values or ranges of
values.
A range of values is two values separated by a dash.
By default the values are in units of Hz.
They may be specified in MHz or kHz
if
.B MHz
or
.B kHz
is added to the end of the line.
The data given here is used by the Xorg server to determine if video
modes are within the specifications of the monitor.
This information should be available in the monitor's handbook.
If this entry is omitted, a default range of 43\-72Hz is used.
.TP 7
.BI "DisplaySize  " "width height"
This optional entry gives the width and height, in millimetres, of the
picture area of the monitor.
If given this is used to calculate the horizontal and vertical pitch (DPI) of
the screen.
.TP 7
.BI "Gamma  " "gamma\-value"
.TP 7
.BI "Gamma  " "red\-gamma green\-gamma blue\-gamma"
This is an optional entry that can be used to specify the gamma correction
for the monitor.
It may be specified as either a single value or as three separate RGB values.
The values should be in the range 0.1 to 10.0, and the default is 1.0.
Not all drivers are capable of using this information.
.TP 7
.BI "UseModes  \*q" modesection\-id \*q
Include the set of modes listed in the
.B Modes
section called
.IR modesection\-id.
This makes all of the modes defined in that section available for use by
this monitor.
.TP 7
.BI "Mode  \*q" name \*q
This is an optional multi-line entry that can be used to provide
definitions for video modes for the monitor.
In most cases this isn't necessary because the built-in set of VESA standard
modes will be sufficient.
The
.B Mode
keyword indicates the start of a multi-line video mode description.
The mode description is terminated with the
.B EndMode
keyword.
The mode description consists of the following entries:
.RS 7
.TP 4
.BI "DotClock  " clock
is the dot (pixel) clock rate to be used for the mode.
.TP 4
.BI "HTimings  " "hdisp hsyncstart hsyncend htotal"
specifies the horizontal timings for the mode.
.TP 4
.BI "VTimings  " "vdisp vsyncstart vsyncend vtotal"
specifies the vertical timings for the mode.
.TP 4
.BI "Flags  \*q" flag \*q " ..."
specifies an optional set of mode flags, each of which is a separate
string in double quotes.
.B \*qInterlace\*q
indicates that the mode is interlaced.
.B \*qDoubleScan\*q
indicates a mode where each scanline is doubled.
.B \*q+HSync\*q
and
.B \*q\-HSync\*q
can be used to select the polarity of the HSync signal.
.B \*q+VSync\*q
and
.B \*q\-VSync\*q
can be used to select the polarity of the VSync signal.
.B \*qComposite\*q
can be used to specify composite sync on hardware where this is supported.
Additionally, on some hardware,
.B \*q+CSync\*q
and
.B \*q\-CSync\*q
may be used to select the composite sync polarity.
.TP 4
.BI "HSkew  " hskew
specifies the number of pixels (towards the right edge of the screen) by
which the display enable signal is to be skewed.
Not all drivers use this information.
This option might become necessary to override the default value supplied
by the server (if any).
\(lqRoving\(rq horizontal lines indicate this value needs to be increased.
If the last few pixels on a scan line appear on the left of the screen,
this value should be decreased.
.TP 4
.BI "VScan  " vscan
specifies the number of times each scanline is painted on the screen.
Not all drivers use this information.
Values less than 1 are treated as 1, which is the default.
Generally, the
.B \*qDoubleScan\*q
.B Flag
mentioned above doubles this value.
.RE
.TP 7
.BI "ModeLine  \*q" name \*q " mode\-description"
This entry is a more compact version of the
.B Mode
entry, and it also can be used to specify video modes for the monitor.
is a single line format for specifying video modes.
In most cases this isn't necessary because the built\-in set of VESA
standard modes will be sufficient.
.PP
.RS 7
The
.I mode\-description
is in four sections, the first three of which are mandatory.
The first is the dot (pixel) clock.
This is a single number specifying the pixel clock rate for the mode in
MHz.
The second section is a list of four numbers specifying the horizontal
timings.
These numbers are the
.IR hdisp ,
.IR hsyncstart ,
.IR hsyncend ,
and
.I htotal
values.
The third section is a list of four numbers specifying the vertical
timings.
These numbers are the
.IR vdisp ,
.IR vsyncstart ,
.IR vsyncend ,
and
.I vtotal
values.
The final section is a list of flags specifying other characteristics of
the mode.
.B Interlace
indicates that the mode is interlaced.
.B DoubleScan
indicates a mode where each scanline is doubled.
.B +HSync
and
.B \-HSync
can be used to select the polarity of the HSync signal.
.B +VSync
and
.B \-VSync
can be used to select the polarity of the VSync signal.
.B Composite
can be used to specify composite sync on hardware where this is supported.
Additionally, on some hardware,
.B +CSync
and
.B \-CSync
may be used to select the composite sync polarity.
The
.B HSkew
and
.B VScan
options mentioned above in the
.B Modes
entry description can also be used here.
.RE
.TP 7
.BI "Option " "\*qDPMS\*q  " \*qbool\*q
This option controls whether the server should enable the DPMS extension
for power management for this screen.  The default is to enable the
extension.
.TP 7
.BI "Option " "\*qSyncOnGreen\*q  " \*qbool\*q
This option controls whether the video card should drive the sync signal
on the green color pin.  Not all cards support this option, and most
monitors do not require it.  The default is off.
.TP 7
.BI "Option " "\*qTargetRefresh\*q  " \*qrate\*q
This optional entry specifies the vertical refresh rate that the server
should aim for when selecting video modes.  Without this option, the
default is to prefer modes with higher refresh rates.
.TP 7
.BI "Option " "\*qPreferredMode\*q  " \*qstring\*q
This optional entry specifies a mode to be marked as the preferred initial mode
of the monitor.
(RandR 1.2-supporting drivers only)
.TP 7
.BI "Option " "\*qPosition\*q  " "\*qx y\*q"
This optional entry specifies the position of the monitor within the X
screen.
(RandR 1.2-supporting drivers only)
.TP 7
.BI "Option " "\*qLeftOf\*q  " \*qoutput\*q
This optional entry specifies that the monitor should be positioned to the
left of the output (not monitor) of the given name.
(RandR 1.2-supporting drivers only)
.TP 7
.BI "Option " "\*qRightOf\*q  " \*qoutput\*q
This optional entry specifies that the monitor should be positioned to the
right of the output (not monitor) of the given name.
(RandR 1.2-supporting drivers only)
.TP 7
.BI "Option " "\*qAbove\*q  " \*qoutput\*q
This optional entry specifies that the monitor should be positioned above the
output (not monitor) of the given name.
(RandR 1.2-supporting drivers only)
.TP 7
.BI "Option " "\*qBelow\*q  " \*qoutput\*q
This optional entry specifies that the monitor should be positioned below the
output (not monitor) of the given name.
(RandR 1.2-supporting drivers only)
.TP 7
.BI "Option " "\*qEnable\*q  " \*qbool\*q
This optional entry specifies whether the monitor should be turned on
at startup.  By default, the server will attempt to enable all connected
monitors.
(RandR 1.2-supporting drivers only)
.TP 7
.BI "Option " "\*qMinClock\*q  " \*qfrequency\*q
This optional entry specifies the minimum dot clock, in kHz, that is supported
by the monitor.
.TP 7
.BI "Option " "\*qMaxClock\*q  " \*qfrequency\*q
This optional entry specifies the maximum dot clock, in kHz, that is supported
by the monitor.
.TP 7
.BI "Option " "\*qIgnore\*q  " \*qbool\*q
This optional entry specifies that the monitor should be ignored entirely,
and not reported through RandR.  This is useful if the hardware reports the
presence of outputs that don't exist.
(RandR 1.2-supporting drivers only)
.TP 7
.BI "Option " "\*qRotate\*q  " \*qrotation\*q
This optional entry specifies the initial rotation of the given monitor.
Valid values for rotation are \*qnormal\*q, \*qleft\*q, \*qright\*q, and
\*qinverted\*q.
(RandR 1.2-supporting drivers only)

.SH "MODES SECTION"
The config file may have multiple
.B Modes
sections, or none.
These sections provide a way of defining sets of video modes independently
of the
.B Monitor
sections.
.B Monitor
sections may include the definitions provided in these sections by
using the
.B UseModes
keyword.
In most cases the
.B Modes
sections are not necessary because the built\-in set of VESA standard modes
will be sufficient.
.PP
.B Modes
sections have the following format:
.PP
.RS 4
.nf
.B  "Section \*qModes\*q"
.BI "    Identifier \*q" name \*q
.I  "    entries"
.I  "    ..."
.B  "EndSection"
.fi
.RE
.PP
The
.B Identifier
entry specifies the unique name for this set of mode descriptions.
The other entries permitted in
.B Modes
sections are the
.B Mode
and
.B ModeLine
entries that are described above in the
.B Monitor
section.
.SH "SCREEN SECTION"
The config file may have multiple
.B Screen
sections.
There must be at least one, for the \(lqscreen\(rq being used.
A \(lqscreen\(rq represents the binding of a graphics device
.RB ( Device
section) and a monitor
.RB ( Monitor
section).
A
.B Screen
section is considered \(lqactive\(rq if it is referenced by an active
.B ServerLayout
section or by the
.B \-screen
command line option.
If neither of those is present, the first
.B Screen
section found in the config file is considered the active one.
.PP
.B Screen
sections have the following format:
.PP
.RS 4
.nf
.B  "Section \*qScreen\*q"
.BI "    Identifier \*q" name \*q
.BI "    Device     \*q" devid \*q
.BI "    Monitor    \*q" monid \*q
.I  "    entries"
.I  "    ..."
.BI "    SubSection \*qDisplay\*q"
.I  "       entries"
.I  "       ...
.B  "    EndSubSection"
.I  "    ..."
.B  "EndSection"
.fi
.RE
.PP
The
.B Identifier
entry is mandatory.
All others are optional.
.PP
The
.B Identifier
entry specifies the unique name for this screen.
The
.B Screen
section provides information specific to the whole screen, including
screen\-specific
.BR Options .
In multi\-head configurations, there will be multiple active
.B Screen
sections, one for each head.
The entries available
for this section are:
.TP 7
.BI "Device  \*q" device\-id \*q
This mandatory entry specifies the
.B Device
section to be used for this screen.
This is what ties a specific graphics card to a screen.
The
.I device\-id
must match the
.B Identifier
of a
.B Device
section in the config file.
.TP 7
.BI "Monitor  \*q" monitor\-id \*q
specifies which monitor description is to be used for this screen.
If a
.B Monitor
name is not specified, a default configuration is used.
Currently the default configuration may not function as expected on all
platforms.
.TP 7
.BI "VideoAdaptor  \*q" xv\-id \*q
specifies an optional Xv video adaptor description to be used with this
screen.
.TP 7
.BI "DefaultDepth  " depth
specifies which color depth the server should use by default.
The
.B \-depth
command line option can be used to override this.
If neither is specified, the default depth is driver\-specific, but in most
cases is 8.
.TP 7
.BI "DefaultFbBpp  " bpp
specifies which framebuffer layout to use by default.
The
.B \-fbbpp
command line option can be used to override this.
In most cases the driver will chose the best default value for this.
The only case where there is even a choice in this value is for depth 24,
where some hardware supports both a packed 24 bit framebuffer layout and a
sparse 32 bit framebuffer layout.
.TP 7
.B Options
Various
.B Option
flags may be specified in the
.B Screen
section.
Some are driver\-specific and are described in the driver documentation.
Others are driver\-independent, and will eventually be described here.
.\" XXX These should really be in an xaa man page.
.TP 7
.BI "Option \*qAccel\*q"
Enables XAA (X Acceleration Architecture), a mechanism that makes video cards'
2D hardware acceleration available to the  Xorg server.
This option is on by default, but it may be necessary to turn it off if
there are bugs in the driver.
There are many options to disable specific accelerated operations, listed
below.
Note that disabling an operation will have no effect if the operation is
not accelerated (whether due to lack of support in the hardware or in the
driver).
.TP 7
.BI "Option \*qInitPrimary\*q \*q" boolean \*q
Use the Int10 module to initialize the primary graphics card.
Normally, only secondary cards are soft-booted using the Int10 module, as the
primary card has already been initialized by the BIOS at boot time.
Default: false.
.TP 7
.BI "Option \*qNoInt10\*q \*q" boolean \*q
Disables the Int10 module, a module that uses the int10 call to the BIOS
of the graphics card to initialize it.
Default: false.
.TP 7
.BI "Option \*qNoMTRR\*q"
Disables MTRR (Memory Type Range Register) support, a feature of modern
processors which can improve video performance by a factor of up to 2.5.
Some hardware has buggy MTRR support, and some video drivers have been
known to exhibit problems when MTRR's are used.
.TP 7
.BI "Option \*qXaaNoCPUToScreenColorExpandFill\*q"
Disables accelerated rectangular expansion blits from source patterns
stored in system memory (using a memory\-mapped aperture).
.TP 7
.BI "Option \*qXaaNoColor8x8PatternFillRect\*q"
Disables accelerated fills of a rectangular region with a full\-color
pattern.
.TP 7
.BI "Option \*qXaaNoColor8x8PatternFillTrap\*q"
Disables accelerated fills of a trapezoidal region with a full\-color
pattern.
.TP 7
.BI "Option \*qXaaNoDashedBresenhamLine\*q"
Disables accelerated dashed Bresenham line draws.
.TP 7
.BI "Option \*qXaaNoDashedTwoPointLine\*q"
Disables accelerated dashed line draws between two arbitrary points.
.TP 7
.BI "Option \*qXaaNoImageWriteRect\*q"
Disables accelerated transfers of full\-color rectangular patterns from
system memory to video memory (using a memory\-mapped aperture).
.TP 7
.BI "Option \*qXaaNoMono8x8PatternFillRect\*q"
Disables accelerated fills of a rectangular region with a monochrome
pattern.
.TP 7
.BI "Option \*qXaaNoMono8x8PatternFillTrap\*q"
Disables accelerated fills of a trapezoidal region with a monochrome
pattern.
.TP 7
.BI "Option \*qXaaNoOffscreenPixmaps\*q"
Disables accelerated draws into pixmaps stored in offscreen video memory.
.TP 7
.BI "Option \*qXaaNoPixmapCache\*q"
Disables caching of patterns in offscreen video memory.
.TP 7
.BI "Option \*qXaaNoScanlineCPUToScreenColorExpandFill\*q"
Disables accelerated rectangular expansion blits from source patterns
stored in system memory (one scan line at a time).
.TP 7
.BI "Option \*qXaaNoScanlineImageWriteRect\*q"
Disables accelerated transfers of full\-color rectangular patterns from
system memory to video memory (one scan line at a time).
.TP 7
.BI "Option \*qXaaNoScreenToScreenColorExpandFill\*q"
Disables accelerated rectangular expansion blits from source patterns
stored in offscreen video memory.
.TP 7
.BI "Option \*qXaaNoScreenToScreenCopy\*q"
Disables accelerated copies of rectangular regions from one part of
video memory to another part of video memory.
.TP 7
.BI "Option \*qXaaNoSolidBresenhamLine\*q"
Disables accelerated solid Bresenham line draws.
.TP 7
.BI "Option \*qXaaNoSolidFillRect\*q"
Disables accelerated solid\-color fills of rectangles.
.TP 7
.BI "Option \*qXaaNoSolidFillTrap\*q"
Disables accelerated solid\-color fills of Bresenham trapezoids.
.TP 7
.BI "Option \*qXaaNoSolidHorVertLine\*q"
Disables accelerated solid horizontal and vertical line draws.
.TP 7
.BI "Option \*qXaaNoSolidTwoPointLine\*q"
Disables accelerated solid line draws between two arbitrary points.
.PP
Each
.B Screen
section may optionally contain one or more
.B Display
subsections.
Those subsections provide depth/fbbpp specific configuration information,
and the one chosen depends on the depth and/or fbbpp that is being used for
the screen.
The
.B Display
subsection format is described in the section below.

.SH "DISPLAY SUBSECTION"
Each
.B Screen
section may have multiple
.B Display
subsections.
The \(lqactive\(rq
.B Display
subsection is the first that matches the depth and/or fbbpp values being
used, or failing that, the first that has neither a depth or fbbpp value
specified.
The
.B Display
subsections are optional.
When there isn't one that matches the depth and/or fbbpp values being used,
all the parameters that can be specified here fall back to their defaults.
.PP
.B Display
subsections have the following format:
.PP
.RS 4
.nf
.B  "    SubSection \*qDisplay\*q"
.BI "        Depth  " depth
.I  "        entries"
.I  "        ..."
.B  "    EndSubSection"
.fi
.RE
.TP 7
.BI "Depth  " depth
This entry specifies what colour depth the
.B Display
subsection is to be used for.
This entry is usually specified, but it may be omitted to create a match\-all
.B Display
subsection or when wishing to match only against the
.B FbBpp
parameter.
The range of
.I depth
values that are allowed depends on the driver.
Most drivers support 8, 15, 16 and 24.
Some also support 1 and/or 4, and some may support other values (like 30).
Note:
.I depth
means the number of bits in a pixel that are actually used to determine
the pixel colour.
32 is not a valid
.I depth
value.
Most hardware that uses 32 bits per pixel only uses 24 of them to hold the
colour information, which means that the colour depth is 24, not 32.
.TP 7
.BI "FbBpp  " bpp
This entry specifies the framebuffer format this
.B Display
subsection is to be used for.
This entry is only needed when providing depth 24 configurations that allow
a choice between a 24 bpp packed framebuffer format and a 32bpp sparse
framebuffer format.
In most cases this entry should not be used.
.TP 7
.BI "Weight  " "red\-weight green\-weight blue\-weight"
This optional entry specifies the relative RGB weighting to be used
for a screen is being used at depth 16 for drivers that allow multiple
formats.
This may also be specified from the command line with the
.B \-weight
option (see
.BR Xorg(1)).
.TP 7
.BI "Virtual  " "xdim ydim"
This optional entry specifies the virtual screen resolution to be used.
.I xdim
must be a multiple of either 8 or 16 for most drivers, and a multiple
of 32 when running in monochrome mode.
The given value will be rounded down if this is not the case.
Video modes which are too large for the specified virtual size will be
rejected.
If this entry is not present, the virtual screen resolution will be set to
accommodate all the valid video modes given in the
.B Modes
entry.
Some drivers/hardware combinations do not support virtual screens.
Refer to the appropriate driver\-specific documentation for details.
.TP 7
.BI "ViewPort  " "x0 y0"
This optional entry sets the upper left corner of the initial display.
This is only relevant when the virtual screen resolution is different
from the resolution of the initial video mode.
If this entry is not given, then the initial display will be centered in
the virtual display area.
.TP 7
.BI "Modes  \*q" mode\-name \*q " ..."
This optional entry specifies the list of video modes to use.
Each
.I mode\-name
specified must be in double quotes.
They must correspond to those specified or referenced in the appropriate
.B Monitor
section (including implicitly referenced built\-in VESA standard modes).
The server will delete modes from this list which don't satisfy various
requirements.
The first valid mode in this list will be the default display mode for
startup.
The list of valid modes is converted internally into a circular list.
It is possible to switch to the next mode with
.B Ctrl+Alt+Keypad\-Plus
and to the previous mode with
.BR Ctrl+Alt+Keypad\-Minus .
When this entry is omitted, the valid modes referenced by the appropriate
.B Monitor
section will be used.  If the
.B Monitor
section contains no modes, then the selection will be taken from the
built-in VESA standard modes.
.TP 7
.BI "Visual  \*q" visual\-name \*q
This optional entry sets the default root visual type.
This may also be specified from the command line (see the
.BR Xserver(1)
man page).
The visual types available for depth 8 are (default is
.BR PseudoColor ):
.PP
.RS 11
.nf
.B StaticGray
.B GrayScale
.B StaticColor
.B PseudoColor
.B TrueColor
.B DirectColor
.fi
.RE
.PP
.RS 7
The visual type available for the depths 15, 16 and 24 are (default is
.BR TrueColor ):
.PP
.RS 4
.nf
.B TrueColor
.B DirectColor
.fi
.RE
.PP
Not all drivers support
.B DirectColor
at these depths.
.PP
The visual types available for the depth 4 are (default is
.BR StaticColor ):
.PP
.RS 4
.nf
.B StaticGray
.B GrayScale
.B StaticColor
.B PseudoColor
.fi
.RE
.PP
The visual type available for the depth 1 (monochrome) is
.BR StaticGray .
.RE
.TP 7
.BI "Black  " "red green blue"
This optional entry allows the \(lqblack\(rq colour to be specified.
This is only supported at depth 1.
The default is black.
.TP 7
.BI "White  " "red green blue"
This optional entry allows the \(lqwhite\(rq colour to be specified.
This is only supported at depth 1.
The default is white.
.TP 7
.B Options
Option flags may be specified in the
.B Display
subsections.
These may include driver\-specific options and driver\-independent options.
The former are described in the driver\-specific documentation.
Some of the latter are described above in the section about the
.B Screen
section, and they may also be included here.
.SH "SERVERLAYOUT SECTION"
The config file may have multiple
.B ServerLayout
sections.
A \(lqserver layout\(rq represents the binding of one or more screens
.RB ( Screen
sections) and one or more input devices
.RB ( InputDevice
sections) to form a complete configuration.
In multi\-head configurations, it also specifies the relative layout of the
heads.
A
.B ServerLayout
section is considered \(lqactive\(rq if it is referenced by the
.B \-layout
command line option or by an
.B "Option \*qDefaultServerLayout\*q"
entry in the
.B ServerFlags
section (the former takes precedence over the latter).
If those options are not used, the first
.B ServerLayout
section found in the config file is considered the active one.
If no
.B ServerLayout
sections are present, the single active screen and two active (core)
input devices are selected as described in the relevant sections above.
.PP
.B ServerLayout
sections have the following format:
.PP
.RS 4
.nf
.B  "Section \*qServerLayout\*q"
.BI "    Identifier   \*q" name \*q
.BI "    Screen       \*q" screen\-id \*q
.I  "    ..."
.BI "    InputDevice  \*q" idev\-id \*q
.I  "    ..."
.I  "    options"
.I  "    ..."
.B  "EndSection"
.fi
.RE
.PP
Each
.B ServerLayout
section must have an
.B Identifier
entry and at least one
.B Screen
entry.
.PP
The
.B Identifier
entry specifies the unique name for this server layout.
The
.B ServerLayout
section provides information specific to the whole session, including
session\-specific
.BR Options .
The
.B ServerFlags
options (described above) may be specified here, and ones given here
override those given in the
.B ServerFlags
section.
.PP
The entries that may be used in this section are described here.
.TP 7
.BI "Screen  " "screen\-num" " \*qscreen\-id\*q " "position\-information"
One of these entries must be given for each screen being used in
a session.
The
.I screen\-id
field is mandatory, and specifies the
.B Screen
section being referenced.
The
.I screen\-num
field is optional, and may be used to specify the screen number
in multi\-head configurations.
When this field is omitted, the screens will be numbered in the order that
they are listed in.
The numbering starts from 0, and must be consecutive.
The
.I position\-information
field describes the way multiple screens are positioned.
There are a number of different ways that this information can be provided:
.RS 7
.TP 4
.I  "x y"
.TP 4
.BI "Absolute  " "x y"
These both specify that the upper left corner's coordinates are
.RI ( x , y ).
The
.B Absolute
keyword is optional.
Some older versions of XFree86 (4.2 and earlier) don't recognise the
.B Absolute
keyword, so it's safest to just specify the coordinates without it.
.TP 4
.BI "RightOf   \*q" screen\-id \*q
.TP 4
.BI "LeftOf    \*q" screen\-id \*q
.TP 4
.BI "Above     \*q" screen\-id \*q
.TP 4
.BI "Below     \*q" screen\-id \*q
.TP 4
.BI "Relative  \*q" screen\-id \*q " x y"
These give the screen's location relative to another screen.
The first four position the screen immediately to the right, left, above or
below the other screen.
When positioning to the right or left, the top edges are aligned.
When positioning above or below, the left edges are aligned.
The
.B Relative
form specifies the offset of the screen's origin (upper left corner)
relative to the origin of another screen.
.RE
.TP 7
.BI "InputDevice  \*q" idev\-id "\*q \*q" option \*q " ..."
One of these entries should be given for each input device being used in
a session.
Normally at least two are required, one each for the core pointer and
keyboard devices.
If either of those is missing, suitable
.B InputDevice
entries are searched for using the method described above in the
.B INPUTDEVICE
section.  The
.I idev\-id
field is mandatory, and specifies the name of the
.B InputDevice
section being referenced.
Multiple
.I option
fields may be specified, each in double quotes.
The options permitted here are any that may also be given in the
.B InputDevice
sections.
Normally only session\-specific input device options would be used here.
The most commonly used options are:
.PP
.RS 11
.nf
.B \*qCorePointer\*q
.B \*qCoreKeyboard\*q
.B \*qSendCoreEvents\*q
.fi
.RE
.PP
.RS 7
and the first two should normally be used to indicate the core pointer
and core keyboard devices respectively.
.RE
.TP 7
.B Options
In addition to the following, any option permitted in the
.B ServerFlags
section may also be specified here.
When the same option appears in both places, the value given here overrides
the one given in the
.B ServerFlags
section.
.TP 7
.BI "Option \*qIsolateDevice\*q  \*q" bus\-id \*q
Restrict device resets to the specified
.IR bus\-id .
See the
.B BusID
option (described in
.BR "DEVICE SECTION" ,
above) for the format of the
.I bus\-id
parameter.
This option overrides
.BR SingleCard ,
if specified.
At present, only PCI devices can be isolated in this manner.
.TP 7
.BI "Option \*qSingleCard\*q  \*q" boolean \*q
As
.BR IsolateDevice ,
except that the bus ID of the first device in the layout is used.
.PP
Here is an example of a
.B ServerLayout
section for a dual headed configuration with two mice:
.PP
.RS 4
.nf
.B "Section \*qServerLayout\*q"
.B "    Identifier  \*qLayout 1\*q"
.B "    Screen      \*qMGA 1\*q"
.B "    Screen      \*qMGA 2\*q RightOf \*qMGA 1\*q"
.B "    InputDevice \*qKeyboard 1\*q \*qCoreKeyboard\*q"
.B "    InputDevice \*qMouse 1\*q    \*qCorePointer\*q"
.B "    InputDevice \*qMouse 2\*q    \*qSendCoreEvents\*q"
.B "    Option      \*qBlankTime\*q  \*q5\*q"
.B "EndSection"
.fi
.RE
.SH "DRI SECTION"
This optional section is used to provide some information for the
Direct Rendering Infrastructure.
Details about the format of this section
can be found in the README.DRI document, which is also available on-line at
.IR <http://dri.freedesktop.org/> .
.SH "VENDOR SECTION"
The optional
.B Vendor
section may be used to provide vendor\-specific configuration information.
Multiple
.B Vendor
sections may be present, and they may contain an
.B Identifier
entry and multiple
.B Option
flags.
The data therein is not used in this release.
.PP
.SH "SEE ALSO"
General:
.BR X (7),
.BR Xserver (1),
.BR Xorg (1),
.BR cvt (1),
.BR gtf (1).
.PP
.B "Not all modules or interfaces are available on all platforms."
.PP
Display drivers:
.BR apm (4),
.BR ati (4),
.BR chips (4),
.BR cirrus (4),
.BR cyrix (4),
.BR fbdev (4),
.BR glide (4),
.BR glint (4),
.BR i128 (4),
.BR i740 (4),
.BR imstt (4),
.BR intel (4),
.BR mga (4),
.BR neomagic (4),
.BR nv (4),
.BR openchrome (4),
.BR r128 (4),
.BR radeon (4),
.BR rendition (4),
.BR savage (4),
.BR s3virge (4),
.BR siliconmotion (4),
.BR sis (4),
.BR sisusb (4),
.BR sunbw2 (4),
.BR suncg14 (4),
.BR suncg3 (4),
.BR suncg6 (4),
.BR sunffb (4),
.BR sunleo (4),
.BR suntcx (4),
.BR tdfx (4),
.\" .BR tga (4),
.BR trident (4),
.BR tseng (4),
.BR vesa (4),
.BR vmware (4),
.BR voodoo (4),
.BR wsfb (4),
.BR xgi (4),
.BR xgixp (4).
.PP
Input drivers:
.BR acecad (4),
.BR calcomp (4),
.BR citron (4),
.BR dmc (4),
.BR dynapro (4),
.BR elographics (4),
.BR evdev (4),
.BR fpit (4),
.BR js_x (4),
.BR joystick (4),
.BR kbd (4),
.BR magictouch (4),
.BR microtouch (4),
.BR mousedrv (4),
.BR mutouch (4),
.BR palmax (4),
.BR penmount (4),
.BR synaptics (4),
.BR tek4957 (4),
.BR ur98 (4),
.BR vmmouse (4),
.BR void (4),
.BR wacom (4).
.PP
Other modules and interfaces:
.BR exa (4),
.BR fbdevhw (4),
.\" .BR shadowfb (4),
.BR v4l (4).
.br
.SH AUTHORS
This manual page was largely rewritten by David Dawes
.IR <dawes@xfree86.org> .

[mikihan]

Нет это - не то. Ещё покажи содержимое файла /var/log/Xorg.0.log и вывод lspci

[katrinok]

/var/log/Xorg.0.log

Код: Выделить всё

X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux katrin-desktop 2.6.31-17-generic #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-17-generic root=UUID=f245b077-4f63-474a-b88a-1132e5a715ac ro quiet splash
Build Date: 14 November 2009  05:48:26PM
xorg-server 2:1.6.4-2ubuntu4.1 (buildd@)
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb  9 19:32:50 2010
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0:1:0:0) 1002:5964:1043:c008 ATI Technologies Inc RV280 [Radeon 9200 SE] rev 1, Mem @ 0xd0000000/134217728, 0xe8020000/65536, I/O @ 0x0000c000/256, BIOS @ 0x????????/131072
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
    Section "Device"
        Identifier    "Builtin Default ati Device 0"
        Driver    "ati"
    EndSection
    Section "Screen"
        Identifier    "Builtin Default ati Screen 0"
        Device    "Builtin Default ati Device 0"
    EndSection
    Section "Device"
        Identifier    "Builtin Default vesa Device 0"
        Driver    "vesa"
    EndSection
    Section "Screen"
        Identifier    "Builtin Default vesa Screen 0"
        Device    "Builtin Default vesa Device 0"
    EndSection
    Section "Device"
        Identifier    "Builtin Default fbdev Device 0"
        Driver    "fbdev"
    EndSection
    Section "Screen"
        Identifier    "Builtin Default fbdev Screen 0"
        Device    "Builtin Default fbdev Device 0"
    EndSection
    Section "ServerLayout"
        Identifier    "Builtin Default Layout"
        Screen    "Builtin Default ati Screen 0"
        Screen    "Builtin Default vesa Screen 0"
        Screen    "Builtin Default fbdev Screen 0"
    EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default ati Screen 0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default ati Device 0"
(==) No monitor specified for screen "Builtin Default ati Screen 0".
    Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
    Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
    Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    Entry deleted from font path.
(==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 6.12.99
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 6.12.99
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 2.2.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 0.4.0
    ABI class: X.Org Video Driver, version 5.0
(II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
    ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
    ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
    ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
    ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
    ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
    ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
    ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
    ATI FirePro M5750, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
    ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
    ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
    ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
    ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
    ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
    ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
    ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
    ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
    ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
    ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
    ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
    ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI RS880
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
(II) [KMS] drm report modesetting isn't supported.
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 0.0.2
    ABI class: X.Org Video Driver, version 5.0
(EE) open /dev/fb0: No such file or directory
(II) resource ranges after probing:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[B]
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[B]
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[B]
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[B]
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) RADEON(0): Built from git commit 7968e1fb89f6b59d1654df48249bf4b81990c008
(II) RADEON(0): TOTO SAYS 00000000e8020000
(II) RADEON(0): MMIO registers at 0x00000000e8020000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
    "Builtin Default ati Screen 0" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon 9200SE 5964 (AGP)" (ChipID = 0x5964)
(--) RADEON(0): Linear framebuffer at 0x00000000d0000000
(II) RADEON(0): AGP card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.31.0
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 40000, min_in_pll: 40, max_in_pll: 3000, xclk: 16600, sclk: 200.000000, mclk: 166.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=16600
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: PAL
(II) RADEON(0): TV standards supported by chip: NTSC PAL
(II) RADEON(0): Port0:
  XRANDR name: VGA-0
  Connector: VGA
  CRT1: INTERNAL_DAC1
  DDC reg: 0x60
(II) RADEON(0): Port1:
  XRANDR name: S-video
  Connector: S-video
  TV1: INTERNAL_DAC2
  DDC reg: 0x0
(II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): EDID vendor "BNQ", prod id 30369
(II) RADEON(0): Using EDID range info for horizontal sync
(II) RADEON(0): Using EDID range info for vertical refresh
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "640x350"x0.0   25.17  640 656 752 800  350 387 389 449 +hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x76.0  141.82  1280 1376 1512 1744  1024 1025 1028 1070 -hsync +vsync (81.3 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x72.0  132.75  1280 1368 1504 1728  1024 1025 1028 1067 -hsync +vsync (76.8 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: BNQ  Model: 76a1  Serial#: 13597
(II) RADEON(0): Year: 2005  Week: 29
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync:  Separate  Composite
(II) RADEON(0): Max Image Size [cm]: horiz.: 34  vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.640 redY: 0.340   greenX: 0.290 greenY: 0.609
(II) RADEON(0): blueX: 0.140 blueY: 0.069   whiteX: 0.310 whiteY: 0.330
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) RADEON(0): #1: hsize: 1280  vsize 1024  refresh: 76  vid: 36993
(II) RADEON(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): #3: hsize: 1280  vsize 1024  refresh: 72  vid: 35969
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 25.2 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 640  h_sync: 656  h_sync_end 752 h_blank_end 800 h_border: 0
(II) RADEON(0): v_active: 350  v_sync: 387  v_sync_end 389 v_blanking: 449 v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: BenQ FP71V+
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):     00ffffffffffff0009d1a1761d350000
(II) RADEON(0):     1d0f01036c221b78eac4f6a3574a9c23
(II) RADEON(0):     114f54bdef80714f81908180818c0101
(II) RADEON(0):     010101010101302a009851002a403070
(II) RADEON(0):     1300782d1100001ed50980a0205e6310
(II) RADEON(0):     10605208782d1100001a000000fd0038
(II) RADEON(0):     4c1f530e000a202020202020000000fc
(II) RADEON(0):     0042656e512046503731562b0a200051
finished output detect: 0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
finished output detect: 1
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): EDID for output VGA-0
(II) RADEON(0): Manufacturer: BNQ  Model: 76a1  Serial#: 13597
(II) RADEON(0): Year: 2005  Week: 29
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync:  Separate  Composite
(II) RADEON(0): Max Image Size [cm]: horiz.: 34  vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.640 redY: 0.340   greenX: 0.290 greenY: 0.609
(II) RADEON(0): blueX: 0.140 blueY: 0.069   whiteX: 0.310 whiteY: 0.330
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) RADEON(0): #1: hsize: 1280  vsize 1024  refresh: 76  vid: 36993
(II) RADEON(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): #3: hsize: 1280  vsize 1024  refresh: 72  vid: 35969
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 25.2 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 640  h_sync: 656  h_sync_end 752 h_blank_end 800 h_border: 0
(II) RADEON(0): v_active: 350  v_sync: 387  v_sync_end 389 v_blanking: 449 v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: BenQ FP71V+
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):     00ffffffffffff0009d1a1761d350000
(II) RADEON(0):     1d0f01036c221b78eac4f6a3574a9c23
(II) RADEON(0):     114f54bdef80714f81908180818c0101
(II) RADEON(0):     010101010101302a009851002a403070
(II) RADEON(0):     1300782d1100001ed50980a0205e6310
(II) RADEON(0):     10605208782d1100001a000000fd0038
(II) RADEON(0):     4c1f530e000a202020202020000000fc
(II) RADEON(0):     0042656e512046503731562b0a200051
(II) RADEON(0): EDID vendor "BNQ", prod id 30369
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "640x350"x0.0   25.17  640 656 752 800  350 387 389 449 +hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x76.0  141.82  1280 1376 1512 1744  1024 1025 1028 1070 -hsync +vsync (81.3 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x72.0  132.75  1280 1368 1504 1728  1024 1025 1028 1067 -hsync +vsync (76.8 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: BNQ  Model: 76a1  Serial#: 13597
(II) RADEON(0): Year: 2005  Week: 29
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync:  Separate  Composite
(II) RADEON(0): Max Image Size [cm]: horiz.: 34  vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.640 redY: 0.340   greenX: 0.290 greenY: 0.609
(II) RADEON(0): blueX: 0.140 blueY: 0.069   whiteX: 0.310 whiteY: 0.330
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) RADEON(0): #1: hsize: 1280  vsize 1024  refresh: 76  vid: 36993
(II) RADEON(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): #3: hsize: 1280  vsize 1024  refresh: 72  vid: 35969
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 25.2 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 640  h_sync: 656  h_sync_end 752 h_blank_end 800 h_border: 0
(II) RADEON(0): v_active: 350  v_sync: 387  v_sync_end 389 v_blanking: 449 v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: BenQ FP71V+
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):     00ffffffffffff0009d1a1761d350000
(II) RADEON(0):     1d0f01036c221b78eac4f6a3574a9c23
(II) RADEON(0):     114f54bdef80714f81908180818c0101
(II) RADEON(0):     010101010101302a009851002a403070
(II) RADEON(0):     1300782d1100001ed50980a0205e6310
(II) RADEON(0):     10605208782d1100001a000000fd0038
(II) RADEON(0):     4c1f530e000a202020202020000000fc
(II) RADEON(0):     0042656e512046503731562b0a200051
(II) RADEON(0): EDID vendor "BNQ", prod id 30369
(II) RADEON(0): Not using mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Printing probed modes for output VGA-0
(II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x72.0  132.75  1280 1368 1504 1728  1024 1025 1028 1067 -hsync +vsync (76.8 kHz)
(II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "640x350"x70.1   25.17  640 656 752 800  350 387 389 449 +hsync -vsync (31.5 kHz)
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): EDID for output S-video
(II) RADEON(0): Output VGA-0 connected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output VGA-0 using initial mode 1280x1024
(**) RADEON(0): Display dimensions: (340, 270) mm
(**) RADEON(0): DPI set to (95, 120)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using EXA acceleration architecture
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 2.4.0
    ABI class: X.Org Video Driver, version 5.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1536
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
    of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux//libfbdevhw.so
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[B]
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[B]
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[B]
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[B]
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[B]
(II) RADEON(0): RADEONScreenInit d0000000 0 0
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable primary dac
(II) RADEON(0): Dynamic Power Management Disabled
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0):   mem_size         : 0x08000000
(II) RADEON(0):   MC_FB_LOCATION   : 0xd7ffd000
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Allocating from a screen of 131072 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00640000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00644000
(II) RADEON(0): Will use 6400 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 6400 kb for back buffer at offset 0x00648000
(II) RADEON(0): Will use 6400 kb for depth buffer at offset 0x00c88000
(II) RADEON(0): Will use 55808 kb for textures at offset 0x012c8000
(II) RADEON(0): Will use 56032 kb for X Server offscreen at offset 0x04948000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xd0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(==) RADEON(0): Using AGP 4x
(II) RADEON(0): [agp] Mode 0x1f000a09 [AGP 0x1106/0x3189; Card 0x1002/0x5964 0x1043/0xc008]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xe0000000
(II) RADEON(0): [agp] Ring mapped at 0xb7648000
(II) RADEON(0): [agp] ring read ptr handle = 0xe0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xb7751000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xe0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xaf3d7000
(II) RADEON(0): [agp] GART texture map handle = 0xe0302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xaeef7000
(II) RADEON(0): [drm] register handle = 0x2d004000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0):   MC_FB_LOCATION   : 0xd7ffd000 0x1fff0000
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 11
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0):   MC_FB_LOCATION  was: 0xd7ffd000 is: 0xd7ffd000
(WW) RADEON(0):   MC_AGP_LOCATION was: 0xffffffc0 is: 0xe07fe000
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0):   MC_FB_LOCATION   : 0xd7ffd000 0xd7ffd000
(II) RADEON(0):   MC_AGP_LOCATION  : 0xe07fe000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration enabled for R200 type cards.
(II) RADEON(0): Setting EXA maxPitchBytes
(II) EXA(0): Offscreen pixmap area of 57376768 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(II)         UploadToScreen
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): Set up overlay video
(II) RADEON(0): Set up textured video
disable primary dac
disable TV
disable primary dac
init memmap
init common
init crtc1
init pll1
freq: 108000000
best_freq: 108000000
best_feedback_div: 16
best_frac_feedback_div: 0
best_ref_div: 2
best_post_div: 2
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0):   MC_FB_LOCATION   : 0xd7ffd000 0xd7ffd000
(II) RADEON(0):   MC_AGP_LOCATION  : 0xe07fe000
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set primary dac
enable primary dac
disable TV
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/dri/r200_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 376 x 301
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 2.2.5
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,ru"
(**) Option "xkb_variant" ","
(**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event2"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,ru"
(**) Option "xkb_variant" ","
(**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events

продолжение файла

Код: Выделить всё

(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,ru"
(**) Option "xkb_variant" ","
(**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,ru"
(**) Option "xkb_variant" ","
(**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
(II) config/hal: Adding input device ImExPS/2 Logitech Explorer Mouse
(**) ImExPS/2 Logitech Explorer Mouse: always reports core events
(**) ImExPS/2 Logitech Explorer Mouse: Device: "/dev/input/event5"
(II) ImExPS/2 Logitech Explorer Mouse: Found 9 mouse buttons
(II) ImExPS/2 Logitech Explorer Mouse: Found x and y relative axes
(II) ImExPS/2 Logitech Explorer Mouse: Found scroll wheel(s)
(II) ImExPS/2 Logitech Explorer Mouse: Configuring as mouse
(**) ImExPS/2 Logitech Explorer Mouse: YAxisMapping: buttons 4 and 5
(**) ImExPS/2 Logitech Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImExPS/2 Logitech Explorer Mouse" (type: MOUSE)
(**) ImExPS/2 Logitech Explorer Mouse: (accel) keeping acceleration scheme 1
(**) ImExPS/2 Logitech Explorer Mouse: (accel) filter chain progression: 2.00
(**) ImExPS/2 Logitech Explorer Mouse: (accel) filter stage 0: 20.00 ms
(**) ImExPS/2 Logitech Explorer Mouse: (accel) set acceleration profile 0
(II) ImExPS/2 Logitech Explorer Mouse: initialized for relative axes.
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event3"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) RADEON(0): EDID for output VGA-0
(II) RADEON(0): Manufacturer: BNQ  Model: 76a1  Serial#: 13597
(II) RADEON(0): Year: 2005  Week: 29
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync:  Separate  Composite
(II) RADEON(0): Max Image Size [cm]: horiz.: 34  vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.640 redY: 0.340   greenX: 0.290 greenY: 0.609
(II) RADEON(0): blueX: 0.140 blueY: 0.069   whiteX: 0.310 whiteY: 0.330
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) RADEON(0): #1: hsize: 1280  vsize 1024  refresh: 76  vid: 36993
(II) RADEON(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): #3: hsize: 1280  vsize 1024  refresh: 72  vid: 35969
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 25.2 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 640  h_sync: 656  h_sync_end 752 h_blank_end 800 h_border: 0
(II) RADEON(0): v_active: 350  v_sync: 387  v_sync_end 389 v_blanking: 449 v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: BenQ FP71V+
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):     00ffffffffffff0009d1a1761d350000
(II) RADEON(0):     1d0f01036c221b78eac4f6a3574a9c23
(II) RADEON(0):     114f54bdef80714f81908180818c0101
(II) RADEON(0):     010101010101302a009851002a403070
(II) RADEON(0):     1300782d1100001ed50980a0205e6310
(II) RADEON(0):     10605208782d1100001a000000fd0038
(II) RADEON(0):     4c1f530e000a202020202020000000fc
(II) RADEON(0):     0042656e512046503731562b0a200051
(II) RADEON(0): EDID vendor "BNQ", prod id 30369
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "640x350"x0.0   25.17  640 656 752 800  350 387 389 449 +hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x76.0  141.82  1280 1376 1512 1744  1024 1025 1028 1070 -hsync +vsync (81.3 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x72.0  132.75  1280 1368 1504 1728  1024 1025 1028 1067 -hsync +vsync (76.8 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: BNQ  Model: 76a1  Serial#: 13597
(II) RADEON(0): Year: 2005  Week: 29
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync:  Separate  Composite
(II) RADEON(0): Max Image Size [cm]: horiz.: 34  vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.640 redY: 0.340   greenX: 0.290 greenY: 0.609
(II) RADEON(0): blueX: 0.140 blueY: 0.069   whiteX: 0.310 whiteY: 0.330
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) RADEON(0): #1: hsize: 1280  vsize 1024  refresh: 76  vid: 36993
(II) RADEON(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): #3: hsize: 1280  vsize 1024  refresh: 72  vid: 35969
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 25.2 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 640  h_sync: 656  h_sync_end 752 h_blank_end 800 h_border: 0
(II) RADEON(0): v_active: 350  v_sync: 387  v_sync_end 389 v_blanking: 449 v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: BenQ FP71V+
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):     00ffffffffffff0009d1a1761d350000
(II) RADEON(0):     1d0f01036c221b78eac4f6a3574a9c23
(II) RADEON(0):     114f54bdef80714f81908180818c0101
(II) RADEON(0):     010101010101302a009851002a403070
(II) RADEON(0):     1300782d1100001ed50980a0205e6310
(II) RADEON(0):     10605208782d1100001a000000fd0038
(II) RADEON(0):     4c1f530e000a202020202020000000fc
(II) RADEON(0):     0042656e512046503731562b0a200051
(II) RADEON(0): EDID vendor "BNQ", prod id 30369
(II) RADEON(0): Not using mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Printing probed modes for output VGA-0
(II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x72.0  132.75  1280 1368 1504 1728  1024 1025 1028 1067 -hsync +vsync (76.8 kHz)
(II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "640x350"x70.1   25.17  640 656 752 800  350 387 389 449 +hsync -vsync (31.5 kHz)
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): EDID for output S-video
(II) RADEON(0): EDID for output VGA-0
(II) RADEON(0): Manufacturer: BNQ  Model: 76a1  Serial#: 13597
(II) RADEON(0): Year: 2005  Week: 29
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync:  Separate  Composite
(II) RADEON(0): Max Image Size [cm]: horiz.: 34  vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.640 redY: 0.340   greenX: 0.290 greenY: 0.609
(II) RADEON(0): blueX: 0.140 blueY: 0.069   whiteX: 0.310 whiteY: 0.330
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) RADEON(0): #1: hsize: 1280  vsize 1024  refresh: 76  vid: 36993
(II) RADEON(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): #3: hsize: 1280  vsize 1024  refresh: 72  vid: 35969
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 25.2 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 640  h_sync: 656  h_sync_end 752 h_blank_end 800 h_border: 0
(II) RADEON(0): v_active: 350  v_sync: 387  v_sync_end 389 v_blanking: 449 v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: BenQ FP71V+
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):     00ffffffffffff0009d1a1761d350000
(II) RADEON(0):     1d0f01036c221b78eac4f6a3574a9c23
(II) RADEON(0):     114f54bdef80714f81908180818c0101
(II) RADEON(0):     010101010101302a009851002a403070
(II) RADEON(0):     1300782d1100001ed50980a0205e6310
(II) RADEON(0):     10605208782d1100001a000000fd0038
(II) RADEON(0):     4c1f530e000a202020202020000000fc
(II) RADEON(0):     0042656e512046503731562b0a200051
(II) RADEON(0): EDID vendor "BNQ", prod id 30369
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "640x350"x0.0   25.17  640 656 752 800  350 387 389 449 +hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x76.0  141.82  1280 1376 1512 1744  1024 1025 1028 1070 -hsync +vsync (81.3 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x72.0  132.75  1280 1368 1504 1728  1024 1025 1028 1067 -hsync +vsync (76.8 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: BNQ  Model: 76a1  Serial#: 13597
(II) RADEON(0): Year: 2005  Week: 29
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync:  Separate  Composite
(II) RADEON(0): Max Image Size [cm]: horiz.: 34  vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.640 redY: 0.340   greenX: 0.290 greenY: 0.609
(II) RADEON(0): blueX: 0.140 blueY: 0.069   whiteX: 0.310 whiteY: 0.330
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) RADEON(0): #1: hsize: 1280  vsize 1024  refresh: 76  vid: 36993
(II) RADEON(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): #3: hsize: 1280  vsize 1024  refresh: 72  vid: 35969
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 25.2 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 640  h_sync: 656  h_sync_end 752 h_blank_end 800 h_border: 0
(II) RADEON(0): v_active: 350  v_sync: 387  v_sync_end 389 v_blanking: 449 v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: BenQ FP71V+
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):     00ffffffffffff0009d1a1761d350000
(II) RADEON(0):     1d0f01036c221b78eac4f6a3574a9c23
(II) RADEON(0):     114f54bdef80714f81908180818c0101
(II) RADEON(0):     010101010101302a009851002a403070
(II) RADEON(0):     1300782d1100001ed50980a0205e6310
(II) RADEON(0):     10605208782d1100001a000000fd0038
(II) RADEON(0):     4c1f530e000a202020202020000000fc
(II) RADEON(0):     0042656e512046503731562b0a200051
(II) RADEON(0): EDID vendor "BNQ", prod id 30369
(II) RADEON(0): Not using mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Printing probed modes for output VGA-0
(II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x72.0  132.75  1280 1368 1504 1728  1024 1025 1028 1067 -hsync +vsync (76.8 kHz)
(II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "640x350"x70.1   25.17  640 656 752 800  350 387 389 449 +hsync -vsync (31.5 kHz)
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): EDID for output S-video
(II) RADEON(0): EDID for output VGA-0
(II) RADEON(0): Manufacturer: BNQ  Model: 76a1  Serial#: 13597
(II) RADEON(0): Year: 2005  Week: 29
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync:  Separate  Composite
(II) RADEON(0): Max Image Size [cm]: horiz.: 34  vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.640 redY: 0.340   greenX: 0.290 greenY: 0.609
(II) RADEON(0): blueX: 0.140 blueY: 0.069   whiteX: 0.310 whiteY: 0.330
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) RADEON(0): #1: hsize: 1280  vsize 1024  refresh: 76  vid: 36993
(II) RADEON(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): #3: hsize: 1280  vsize 1024  refresh: 72  vid: 35969
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 25.2 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 640  h_sync: 656  h_sync_end 752 h_blank_end 800 h_border: 0
(II) RADEON(0): v_active: 350  v_sync: 387  v_sync_end 389 v_blanking: 449 v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: BenQ FP71V+
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):     00ffffffffffff0009d1a1761d350000
(II) RADEON(0):     1d0f01036c221b78eac4f6a3574a9c23
(II) RADEON(0):     114f54bdef80714f81908180818c0101
(II) RADEON(0):     010101010101302a009851002a403070
(II) RADEON(0):     1300782d1100001ed50980a0205e6310
(II) RADEON(0):     10605208782d1100001a000000fd0038
(II) RADEON(0):     4c1f530e000a202020202020000000fc
(II) RADEON(0):     0042656e512046503731562b0a200051
(II) RADEON(0): EDID vendor "BNQ", prod id 30369
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "640x350"x0.0   25.17  640 656 752 800  350 387 389 449 +hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x76.0  141.82  1280 1376 1512 1744  1024 1025 1028 1070 -hsync +vsync (81.3 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x72.0  132.75  1280 1368 1504 1728  1024 1025 1028 1067 -hsync +vsync (76.8 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: BNQ  Model: 76a1  Serial#: 13597
(II) RADEON(0): Year: 2005  Week: 29
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync:  Separate  Composite
(II) RADEON(0): Max Image Size [cm]: horiz.: 34  vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.640 redY: 0.340   greenX: 0.290 greenY: 0.609
(II) RADEON(0): blueX: 0.140 blueY: 0.069   whiteX: 0.310 whiteY: 0.330
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) RADEON(0): #1: hsize: 1280  vsize 1024  refresh: 76  vid: 36993
(II) RADEON(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): #3: hsize: 1280  vsize 1024  refresh: 72  vid: 35969
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 25.2 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 640  h_sync: 656  h_sync_end 752 h_blank_end 800 h_border: 0
(II) RADEON(0): v_active: 350  v_sync: 387  v_sync_end 389 v_blanking: 449 v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: BenQ FP71V+
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):     00ffffffffffff0009d1a1761d350000
(II) RADEON(0):     1d0f01036c221b78eac4f6a3574a9c23
(II) RADEON(0):     114f54bdef80714f81908180818c0101
(II) RADEON(0):     010101010101302a009851002a403070
(II) RADEON(0):     1300782d1100001ed50980a0205e6310
(II) RADEON(0):     10605208782d1100001a000000fd0038
(II) RADEON(0):     4c1f530e000a202020202020000000fc
(II) RADEON(0):     0042656e512046503731562b0a200051
(II) RADEON(0): EDID vendor "BNQ", prod id 30369
(II) RADEON(0): Not using mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Printing probed modes for output VGA-0
(II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x72.0  132.75  1280 1368 1504 1728  1024 1025 1028 1067 -hsync +vsync (76.8 kHz)
(II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "640x350"x70.1   25.17  640 656 752 800  350 387 389 449 +hsync -vsync (31.5 kHz)
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): EDID for output S-video
(II) RADEON(0): EDID for output VGA-0
(II) RADEON(0): Manufacturer: BNQ  Model: 76a1  Serial#: 13597
(II) RADEON(0): Year: 2005  Week: 29
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync:  Separate  Composite
(II) RADEON(0): Max Image Size [cm]: horiz.: 34  vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.640 redY: 0.340   greenX: 0.290 greenY: 0.609
(II) RADEON(0): blueX: 0.140 blueY: 0.069   whiteX: 0.310 whiteY: 0.330
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) RADEON(0): #1: hsize: 1280  vsize 1024  refresh: 76  vid: 36993
(II) RADEON(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): #3: hsize: 1280  vsize 1024  refresh: 72  vid: 35969
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 25.2 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 640  h_sync: 656  h_sync_end 752 h_blank_end 800 h_border: 0
(II) RADEON(0): v_active: 350  v_sync: 387  v_sync_end 389 v_blanking: 449 v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: BenQ FP71V+
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):     00ffffffffffff0009d1a1761d350000
(II) RADEON(0):     1d0f01036c221b78eac4f6a3574a9c23
(II) RADEON(0):     114f54bdef80714f81908180818c0101
(II) RADEON(0):     010101010101302a009851002a403070
(II) RADEON(0):     1300782d1100001ed50980a0205e6310
(II) RADEON(0):     10605208782d1100001a000000fd0038
(II) RADEON(0):     4c1f530e000a202020202020000000fc
(II) RADEON(0):     0042656e512046503731562b0a200051
(II) RADEON(0): EDID vendor "BNQ", prod id 30369
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "640x350"x0.0   25.17  640 656 752 800  350 387 389 449 +hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x76.0  141.82  1280 1376 1512 1744  1024 1025 1028 1070 -hsync +vsync (81.3 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x72.0  132.75  1280 1368 1504 1728  1024 1025 1028 1067 -hsync +vsync (76.8 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: BNQ  Model: 76a1  Serial#: 13597
(II) RADEON(0): Year: 2005  Week: 29
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync:  Separate  Composite
(II) RADEON(0): Max Image Size [cm]: horiz.: 34  vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.640 redY: 0.340   greenX: 0.290 greenY: 0.609
(II) RADEON(0): blueX: 0.140 blueY: 0.069   whiteX: 0.310 whiteY: 0.330
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) RADEON(0): #1: hsize: 1280  vsize 1024  refresh: 76  vid: 36993
(II) RADEON(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): #3: hsize: 1280  vsize 1024  refresh: 72  vid: 35969
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 25.2 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 640  h_sync: 656  h_sync_end 752 h_blank_end 800 h_border: 0
(II) RADEON(0): v_active: 350  v_sync: 387  v_sync_end 389 v_blanking: 449 v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: BenQ FP71V+
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):     00ffffffffffff0009d1a1761d350000
(II) RADEON(0):     1d0f01036c221b78eac4f6a3574a9c23
(II) RADEON(0):     114f54bdef80714f81908180818c0101
(II) RADEON(0):     010101010101302a009851002a403070
(II) RADEON(0):     1300782d1100001ed50980a0205e6310
(II) RADEON(0):     10605208782d1100001a000000fd0038
(II) RADEON(0):     4c1f530e000a202020202020000000fc
(II) RADEON(0):     0042656e512046503731562b0a200051
(II) RADEON(0): EDID vendor "BNQ", prod id 30369
(II) RADEON(0): Not using mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Printing probed modes for output VGA-0
(II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x72.0  132.75  1280 1368 1504 1728  1024 1025 1028 1067 -hsync +vsync (76.8 kHz)
(II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "640x350"x70.1   25.17  640 656 752 800  350 387 389 449 +hsync -vsync (31.5 kHz)
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): EDID for output S-video
(II) RADEON(0): EDID for output VGA-0
(II) RADEON(0): Manufacturer: BNQ  Model: 76a1  Serial#: 13597
(II) RADEON(0): Year: 2005  Week: 29
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync:  Separate  Composite
(II) RADEON(0): Max Image Size [cm]: horiz.: 34  vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.640 redY: 0.340   greenX: 0.290 greenY: 0.609
(II) RADEON(0): blueX: 0.140 blueY: 0.069   whiteX: 0.310 whiteY: 0.330
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) RADEON(0): #1: hsize: 1280  vsize 1024  refresh: 76  vid: 36993
(II) RADEON(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): #3: hsize: 1280  vsize 1024  refresh: 72  vid: 35969
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 25.2 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 640  h_sync: 656  h_sync_end 752 h_blank_end 800 h_border: 0
(II) RADEON(0): v_active: 350  v_sync: 387  v_sync_end 389 v_blanking: 449 v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: BenQ FP71V+
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):     00ffffffffffff0009d1a1761d350000
(II) RADEON(0):     1d0f01036c221b78eac4f6a3574a9c23
(II) RADEON(0):     114f54bdef80714f81908180818c0101
(II) RADEON(0):     010101010101302a009851002a403070
(II) RADEON(0):     1300782d1100001ed50980a0205e6310
(II) RADEON(0):     10605208782d1100001a000000fd0038
(II) RADEON(0):     4c1f530e000a202020202020000000fc
(II) RADEON(0):     0042656e512046503731562b0a200051
(II) RADEON(0): EDID vendor "BNQ", prod id 30369
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "640x350"x0.0   25.17  640 656 752 800  350 387 389 449 +hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x76.0  141.82  1280 1376 1512 1744  1024 1025 1028 1070 -hsync +vsync (81.3 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x72.0  132.75  1280 1368 1504 1728  1024 1025 1028 1067 -hsync +vsync (76.8 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: BNQ  Model: 76a1  Serial#: 13597
(II) RADEON(0): Year: 2005  Week: 29
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync:  Separate  Composite
(II) RADEON(0): Max Image Size [cm]: horiz.: 34  vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.640 redY: 0.340   greenX: 0.290 greenY: 0.609
(II) RADEON(0): blueX: 0.140 blueY: 0.069   whiteX: 0.310 whiteY: 0.330
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) RADEON(0): #1: hsize: 1280  vsize 1024  refresh: 76  vid: 36993
(II) RADEON(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): #3: hsize: 1280  vsize 1024  refresh: 72  vid: 35969
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 25.2 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 640  h_sync: 656  h_sync_end 752 h_blank_end 800 h_border: 0
(II) RADEON(0): v_active: 350  v_sync: 387  v_sync_end 389 v_blanking: 449 v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: BenQ FP71V+
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):     00ffffffffffff0009d1a1761d350000
(II) RADEON(0):     1d0f01036c221b78eac4f6a3574a9c23
(II) RADEON(0):     114f54bdef80714f81908180818c0101
(II) RADEON(0):     010101010101302a009851002a403070
(II) RADEON(0):     1300782d1100001ed50980a0205e6310
(II) RADEON(0):     10605208782d1100001a000000fd0038
(II) RADEON(0):     4c1f530e000a202020202020000000fc
(II) RADEON(0):     0042656e512046503731562b0a200051
(II) RADEON(0): EDID vendor "BNQ", prod id 30369
(II) RADEON(0): Not using mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Printing probed modes for output VGA-0
(II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x72.0  132.75  1280 1368 1504 1728  1024 1025 1028 1067 -hsync +vsync (76.8 kHz)
(II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "640x350"x70.1   25.17  640 656 752 800  350 387 389 449 +hsync -vsync (31.5 kHz)
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): EDID for output S-video
(II) RADEON(0): EDID for output VGA-0
(II) RADEON(0): Manufacturer: BNQ  Model: 76a1  Serial#: 13597
(II) RADEON(0): Year: 2005  Week: 29
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync:  Separate  Composite
(II) RADEON(0): Max Image Size [cm]: horiz.: 34  vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.640 redY: 0.340   greenX: 0.290 greenY: 0.609
(II) RADEON(0): blueX: 0.140 blueY: 0.069   whiteX: 0.310 whiteY: 0.330
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) RADEON(0): #1: hsize: 1280  vsize 1024  refresh: 76  vid: 36993
(II) RADEON(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): #3: hsize: 1280  vsize 1024  refresh: 72  vid: 35969
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 25.2 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 640  h_sync: 656  h_sync_end 752 h_blank_end 800 h_border: 0
(II) RADEON(0): v_active: 350  v_sync: 387  v_sync_end 389 v_blanking: 449 v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: BenQ FP71V+
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):     00ffffffffffff0009d1a1761d350000
(II) RADEON(0):     1d0f01036c221b78eac4f6a3574a9c23
(II) RADEON(0):     114f54bdef80714f81908180818c0101
(II) RADEON(0):     010101010101302a009851002a403070
(II) RADEON(0):     1300782d1100001ed50980a0205e6310
(II) RADEON(0):     10605208782d1100001a000000fd0038
(II) RADEON(0):     4c1f530e000a202020202020000000fc
(II) RADEON(0):     0042656e512046503731562b0a200051
(II) RADEON(0): EDID vendor "BNQ", prod id 30369
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "640x350"x0.0   25.17  640 656 752 800  350 387 389 449 +hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x76.0  141.82  1280 1376 1512 1744  1024 1025 1028 1070 -hsync +vsync (81.3 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x72.0  132.75  1280 1368 1504 1728  1024 1025 1028 1067 -hsync +vsync (76.8 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: BNQ  Model: 76a1  Serial#: 13597
(II) RADEON(0): Year: 2005  Week: 29
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync:  Separate  Composite
(II) RADEON(0): Max Image Size [cm]: horiz.: 34  vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.640 redY: 0.340   greenX: 0.290 greenY: 0.609
(II) RADEON(0): blueX: 0.140 blueY: 0.069   whiteX: 0.310 whiteY: 0.330
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) RADEON(0): #1: hsize: 1280  vsize 1024  refresh: 76  vid: 36993
(II) RADEON(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): #3: hsize: 1280  vsize 1024  refresh: 72  vid: 35969
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 25.2 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 640  h_sync: 656  h_sync_end 752 h_blank_end 800 h_border: 0
(II) RADEON(0): v_active: 350  v_sync: 387  v_sync_end 389 v_blanking: 449 v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: BenQ FP71V+
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):     00ffffffffffff0009d1a1761d350000
(II) RADEON(0):     1d0f01036c221b78eac4f6a3574a9c23
(II) RADEON(0):     114f54bdef80714f81908180818c0101
(II) RADEON(0):     010101010101302a009851002a403070
(II) RADEON(0):     1300782d1100001ed50980a0205e6310
(II) RADEON(0):     10605208782d1100001a000000fd0038
(II) RADEON(0):     4c1f530e000a202020202020000000fc
(II) RADEON(0):     0042656e512046503731562b0a200051
(II) RADEON(0): EDID vendor "BNQ", prod id 30369
(II) RADEON(0): Not using mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Printing probed modes for output VGA-0
(II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x72.0  132.75  1280 1368 1504 1728  1024 1025 1028 1067 -hsync +vsync (76.8 kHz)
(II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "640x350"x70.1   25.17  640 656 752 800  350 387 389 449 +hsync -vsync (31.5 kHz)
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): EDID for output S-video
Changing OV0_BASE_ADDR from 0xd0000000 to 0xd5c00000

еще есть Xorg.0.log.old но он не открывается, пишет "нет установленного приложения для файлов типа резеврная копия"
lspci

Код: Выделить всё

katrin@katrin-desktop:~$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
00:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01)
01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01)

[mikihan]

Вроде бы всё должно работать. Попробуй через sudo закинуть в etc/X11/ такой xorg.conf и рестартуй Xserver.

[katrinok]

Вроде бы всё должно работать. Попробуй через sudo закинуть в etc/X11/ такой xorg.conf и рестартуй Xserver.

закинула, вот только на Xserver выдает

Код: Выделить всё

katrin@katrin-desktop:~$ Xserver
No command 'Xserver' found, did you mean:
 Command 'jserver' from package 'freewnn-jserver' (universe)
 Command 'kserver' from package 'freewnn-kserver' (universe)
 Command 'pserver' from package 'ncpfs' (universe)
 Command 'tserver' from package 'freewnn-cserver' (universe)
 Command 'server' from package 'rsplib-tools' (universe)
 Command 'cserver' from package 'freewnn-cserver' (universe)
 Command 'vserver' from package 'util-vserver' (universe)
Xserver: command not found

или я что-то не так делаю?

[mikihan]

Извиняюсь, имел в виду Xorg. Его проще всего рестартовать завершив сеанс или перезагрузив комп.

[katrinok]

Извиняюсь, имел в виду Xorg. Его проще всего рестартовать завершив сеанс или перезагрузив комп.

не получается, все равно не работает

[Frank]

Для этой карточки либо опенсорсный драйвер, который работает сразу при установке, либо ATI Proprietary Linux x86 Display Driver 8.28.8 - но он работает только с X.Org 6.7, 6.8, 6.9, 7.0, 7.1 версий. Учитывая, что сейчас в убунте используется версия 7.3, единственная рекомендация - или смените карточку на посовременней, или не морочьте себе яйца и сидите на опенсорсном драйвере.

[blackdevil]

или не морочьте себе яйца

автор, вроде бы, девушка

Про открытые дрова и строчку Driver "ati" было сказано еще в начале темы. Но авторше, видимо, легче под копирку следовать непонятным советам, чем почитать про xorg.conf и вписать туда драйвер.

[katrinok]

3) благодаря пункту 2 в нашей домашней папке создается пример конфига, его копируем в /etc/X11/xorg.conf и читаем man xorg.conf или смотрим в гугле примеры конфигов на предмет строчки Driver "ati"

что конкретно гуглить, я не знаю. Я ну убунте всего чуть больше месяца. Может подскажете по человечески, а не

Про открытые дрова и строчку Driver "ati" было сказано еще в начале темы. Но авторше, видимо, легче под копирку следовать непонятным советам, чем почитать про xorg.conf и вписать туда драйвер.

.
Если бы я знала что и как настроить, то не создавала бы тему, а в поиске настройки сей видеокарты не перерывала бы того количества форумов на разных языках

[pcodr]

Судя по выложенному /var/log/Xorg.0.log грузится именно опенсорсный драйвер ati. Он канечно хороший, но очень глючный. У меня например с ним при включенных эффектах в kde4 падают иксы. Так что я бы особо не расчитывал на compiz и прочие свистелки.