Решено: Не отзываются иксы.

[jojahti]

Ставлю генту по хэндбуку.
Зависают намертво. После X -config /root/xorg.conf.new появляется простыня с прицелом. И всё. Прицел не двигается. На ctrl+alt+bksp не отзывается.
Что нужно поправить?

[C10H15N]

Читайте FAQ.Там это есть.

Какая версия xorg и с какими use собрана?

[Brainsburn]

Ставлю генту по хэндбуку.
Зависают намертво. После X -config /root/xorg.conf.new появляется простыня с прицелом. И всё. Прицел не двигается. На ctrl+alt+bksp не отзывается.
Что нужно поправить?

Запустите HAL =)

[.Serj.]

Запустите HAL =)

Вы проявляете прямо чудеса телепатии! Откуда вам знать, что в USE-флагах xorg-server выставлен hal?

Ждём подробностей. И логов.

[DaemonTux]

Ставлю генту по хэндбуку.
Зависают намертво. После X -config /root/xorg.conf.new появляется простыня с прицелом. И всё. Прицел не двигается. На ctrl+alt+bksp не отзывается.
Что нужно поправить?

В ядре evdev включен? в /etc/make.conf

Код: Выделить всё

 INPUT_DEVICES="evdev"

есть?

[jojahti]

.Serj.

Откуда вам знать, что в USE-флагах xorg-server выставлен hal?

Эврика! Пересобрал с hal Теперь -retro тест работает. А иксы теперь не работают но уже получше.

[jojahti]

На startx выдаёт:
failed to initialize the GLX module; please check in your X log file that the GLX module has been loaded in your X server, and that the module is the NVIDIA GLX module. If you continue encounter problems, please try reinstalling the NVIDIA driver.
И что их не удовлетворяет?

Вот лог на всякий случай.
/var/log/Xorg.0.log

Код: Выделить всё

X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-gentoo-r7 i686
Current Operating System: Linux rz 2.6.32-gentoo-r7 #1 SMP Tue Apr 20 13:59:28 GMT+3 2010 i686
Kernel command line: BOOT_IMAGE=/boot/kernel-genkernel-x86-2.6.32-gentoo-r7 root=/dev/sda2
Build Date: 27 April 2010  04:56:49PM

Current version of pixman: 0.17.2
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 27 17:29:39 2010
(==) Using config file: "/etc/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/misc/" does not exist.
    Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
    Entry deleted from font path.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
    Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1/" does not exist.
    Entry deleted from font path.
(WW) The directory "/usr/share/fonts/100dpi/" does not exist.
    Entry deleted from font path.
(WW) The directory "/usr/share/fonts/75dpi/" does not exist.
    Entry deleted from font path.
(WW) The directory "/usr/share/fonts/misc/" does not exist.
    Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
    Entry deleted from font path.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
    Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1/" does not exist.
    Entry deleted from font path.
(WW) The directory "/usr/share/fonts/100dpi/" does not exist.
    Entry deleted from font path.
(WW) The directory "/usr/share/fonts/75dpi/" does not exist.
    Entry deleted from font path.
(**) FontPath set to:

(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81e6ac0
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
(--) using VT number 7

(--) PCI:*(0:0:5:0) 10de:0247:1462:373d nVidia Corporation C51 [GeForce Go 6100] rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
(--) PCI: (0:0:10:3) 10de:0271:1462:373d nVidia Corporation MCP51 PMU rev 163, Mem @ 0xfeb80000/262144
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver  190.42  Tue Oct 20 20:26:00 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 00@00:05:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) Apr 27 17:29:39 NVIDIA(0): Enabling RENDER acceleration
(EE) Apr 27 17:29:39 NVIDIA(0): Failed to initialize the GLX module; please check in your X
(EE) Apr 27 17:29:39 NVIDIA(0):     log file that the GLX module has been loaded in your X
(EE) Apr 27 17:29:39 NVIDIA(0):     server, and that the module is the NVIDIA GLX module.  If
(EE) Apr 27 17:29:39 NVIDIA(0):     you continue to encounter problems, Please try
(EE) Apr 27 17:29:39 NVIDIA(0):     reinstalling the NVIDIA driver.
(II) Apr 27 17:29:39 NVIDIA(0): NVIDIA GPU GeForce Go 6100 (C51) at PCI:0:5:0 (GPU-0)
(--) Apr 27 17:29:39 NVIDIA(0): Memory: 524288 kBytes
(--) Apr 27 17:29:39 NVIDIA(0): VideoBIOS: 05.51.28.54.00
(--) Apr 27 17:29:39 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Apr 27 17:29:39 NVIDIA(0): Connected display device(s) on GeForce Go 6100 at PCI:0:5:0:
(--) Apr 27 17:29:39 NVIDIA(0):     Apple Color LCD (DFP-0)
(--) Apr 27 17:29:39 NVIDIA(0): Apple Color LCD (DFP-0): 310.0 MHz maximum pixel clock
(--) Apr 27 17:29:39 NVIDIA(0): Apple Color LCD (DFP-0): Internal Dual Link LVDS
(II) Apr 27 17:29:39 NVIDIA(0): Assigned Display Device: DFP-0
(==) Apr 27 17:29:39 NVIDIA(0):
(==) Apr 27 17:29:39 NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) Apr 27 17:29:39 NVIDIA(0):     will be used as the requested mode.
(==) Apr 27 17:29:39 NVIDIA(0):
(II) Apr 27 17:29:39 NVIDIA(0): Validated modes:
(II) Apr 27 17:29:39 NVIDIA(0):     "nvidia-auto-select"
(II) Apr 27 17:29:39 NVIDIA(0): Virtual screen size determined to be 1280 x 800
(--) Apr 27 17:29:39 NVIDIA(0): DPI set to (112, 106); computed from "UseEdidDpi" X config
(--) Apr 27 17:29:39 NVIDIA(0):     option
(==) Apr 27 17:29:39 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) Apr 27 17:29:39 NVIDIA(0): Initialized GPU GART.
(II) Apr 27 17:29:39 NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) Apr 27 17:29:39 NVIDIA(0):     may not be running or the "AcpidSocketPath" X
(II) Apr 27 17:29:39 NVIDIA(0):     configuration option may not be set correctly.  When the
(II) Apr 27 17:29:39 NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
(II) Apr 27 17:29:39 NVIDIA(0):     try to use it to receive ACPI event notifications.  For
(II) Apr 27 17:29:39 NVIDIA(0):     details, please see the "ConnectToAcpid" and
(II) Apr 27 17:29:39 NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
(II) Apr 27 17:29:39 NVIDIA(0):     Config Options in the README.
(II) Apr 27 17:29:39 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) Apr 27 17:29:39 NVIDIA(0):     enough to receive ACPI display change hotkey events.
(II) Apr 27 17:29:39 NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) Apr 27 17:29:40 NVIDIA(0): Initialized OpenGL Acceleration
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) Apr 27 17:29:40 NVIDIA(0): Initialized X Rendering Acceleration
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(==) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/hal: Adding input device Video Bus
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 2.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event8"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event7"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event6"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event5"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Logitech
(**) Logitech: always reports core events
(**) Logitech: Device: "/dev/input/event3"
(II) Logitech: Found 3 mouse buttons
(II) Logitech: Found scroll wheel(s)
(II) Logitech: Found relative axes
(II) Logitech: Found x and y relative axes
(II) Logitech: Configuring as mouse
(**) Logitech: YAxisMapping: buttons 4 and 5
(**) Logitech: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech" (type: MOUSE)
(**) Logitech: (accel) keeping acceleration scheme 1
(**) Logitech: (accel) acceleration profile 0
(II) Logitech: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(**) SynPS/2 Synaptics TouchPad: always reports core events
(**) SynPS/2 Synaptics TouchPad: Device: "/dev/input/event2"
(II) SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
(II) SynPS/2 Synaptics TouchPad: Found absolute axes
(II) SynPS/2 Synaptics TouchPad: Found x and y absolute axes
(II) SynPS/2 Synaptics TouchPad: Found absolute touchpad.
(II) SynPS/2 Synaptics TouchPad: Configuring as touchpad
(**) SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
(**) SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(II) SynPS/2 Synaptics TouchPad: initialized for absolute axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) Video Bus: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Sleep Button: Close
(II) UnloadModule: "evdev"
(II) Logitech: Close
(II) UnloadModule: "evdev"
(II) SynPS/2 Synaptics TouchPad: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"

P.S. А дрова на видюху надо ставить?

[.Serj.]

С нвидией дел не имел, xorg-server-1.8.0, USE='-hal -udev', клавиатура работает через драйвер kbd, мышь — через mouse, etc. А с этим evdev вечно у меня проблемы…

[megabaks]

в /etc/make.conf

Код: Выделить всё

 INPUT_DEVICES="evdev"

есть?

это лишнее!

С нвидией дел не имел, xorg-server-1.8.0, USE='-hal -udev', клавиатура работает через драйвер kbd, мышь — через mouse, etc. А с этим evdev вечно у меня проблемы…

а нвидия и выставляет такие дрова )))

[serzh-z]

jojahti
Что в конфиге иксов и зачем он вообще нужен?

[jojahti]

serzh-z
Вот конфиг. Он автосгенерированный.
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection

Section "Module"
Load "dri"
Load "dbe"
Load "dri2"
Load "record"
Load "extmod"
Load "glx"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "C51 [GeForce Go 6100]"
BusID "PCI:0:5:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

[inspirra]

Автоматическая организация конфига для драйверов nvidia осуществляется исключительно средствами nvidia-xconfig. (подробности по ключу -A)
#> rm /etc/X11/xorg.conf & nvidia-xconfig & xinit

[jojahti]

eselect set opengl nvidia помогло.