huawei e160g (образ core стянул и поставил а остальное никак)

[Earl13]

как можно заставить модем e160g подключиться к сети из консоли?
/var/log/messages.log

Код: Выделить всё

May  9 09:54:17 root-pc kernel: usbserial: USB Serial Driver core
May  9 09:54:17 root-pc kernel: USB Serial support registered for GSM modem (1-port)
May  9 09:54:17 root-pc kernel: option 2-3:1.0: GSM modem (1-port) converter detected
May  9 09:54:17 root-pc kernel: usb 2-3: GSM modem (1-port) converter now attached to ttyUSB0
May  9 09:54:17 root-pc kernel: option 2-3:1.1: GSM modem (1-port) converter detected
May  9 09:54:17 root-pc kernel: usb 2-3: GSM modem (1-port) converter now attached to ttyUSB1
May  9 09:54:17 root-pc kernel: usbcore: registered new interface driver option
May  9 09:54:17 root-pc kernel: option: v0.7.2:USB Driver for GSM modems

[evgsd]

как можно заставить модем e160g подключиться к сети из консоли?
/var/log/messages.log

Код: Выделить всё

May  9 09:54:17 root-pc kernel: usbserial: USB Serial Driver core
May  9 09:54:17 root-pc kernel: USB Serial support registered for GSM modem (1-port)
May  9 09:54:17 root-pc kernel: option 2-3:1.0: GSM modem (1-port) converter detected
May  9 09:54:17 root-pc kernel: usb 2-3: GSM modem (1-port) converter now attached to ttyUSB0
May  9 09:54:17 root-pc kernel: option 2-3:1.1: GSM modem (1-port) converter detected
May  9 09:54:17 root-pc kernel: usb 2-3: GSM modem (1-port) converter now attached to ttyUSB1
May  9 09:54:17 root-pc kernel: usbcore: registered new interface driver option
May  9 09:54:17 root-pc kernel: option: v0.7.2:USB Driver for GSM modems

настраивайте рррd. Или что то не так вкурил?

[Earl13]

в том и вопрос.
вывод ifconfig -l показал только eth0 и lo.
как создать подключение ppp0?

[Earl13]

запустил pppoe-setup.
вывод успешен. при запуске pppoe-start доходит до таймаута.
думал из-за точки доступа. в pppoe.conf вписал "AT=CGDCONT=1,"ip","internet""
пробовал снова и опять не хочет

[arkhnchul]

какое нафиг pppoe) это ж обычный модем.
так.
короче, файлы:
/etc/ppp/peers/mega (назвать по усмотрению):

Код: Выделить всё

/dev/ttyACM0 115200
user megafon
connect '/usr/sbin/chat -v -f /etc/ppp/chatscripts/mega'
noauth
defaultroute
lock
debug
novjccomp
nopcomp
nodeflate
novj
nobsdcomp
default-asyncmap
ipcp-accept-local
ipcp-accept-remote
usepeerdns
defaultroute

/etc/ppp/chatscripts/mega :

Код: Выделить всё

TIMEOUT 5
ECHO    ON
ABORT   'BUSY'
ABORT   'ERROR'
ABORT   'NO ANSWER'
ABORT   'NO CARRIER'
ABORT   'NO DIALTONE'
ABORT   'RINGING'
''              ATZ
TIMEOUT 12
OK    AT+CGDCONT=1,"IP","internet.mts.ru"
OK    ATDT*99#
CONNECT

/etc/ppp/chap-secrets:

Код: Выделить всё

# Secrets for authentication using CHAP
# client    server    secret            IP addresses
*    *    volga    *

мелочи типа имени устройства и скорости поменять на свои, проверку пинкода отключить, запуск соединения - pppd call mega (или что там у вас), смотреть /var/log/messages в случае неудачи.

[Earl13]

arkhnchul
спасибо! а то по гуглю подумал что это и есть pppoe вот и стал настраивать)

[Earl13]

Код: Выделить всё

May 10 18:48:50 myhost pppd[2145]: pppd 2.4.4 started by root, uid 0
May 10 18:48:51 myhost chat[2146]: timeout set to 5 seconds
May 10 18:48:51 myhost chat[2146]: abort on (BUSY)
May 10 18:48:51 myhost chat[2146]: expect (^M)
May 10 18:48:56 myhost chat[2146]: alarm
May 10 18:48:56 myhost chat[2146]: Failed
May 10 18:48:57 myhost pppd[2145]: Exit.

из-за чего он отключился?

[Earl13]

Код: Выделить всё

May 10 15:46:02 myhost pppd[1901]: pppd 2.4.4 started by root, uid 0
May 10 15:46:03 myhost chat[1902]: timeout set to 5 seconds
May 10 15:46:03 myhost chat[1902]: abort on (BUSY)
May 10 15:46:03 myhost chat[1902]: abort on (ERROR)
May 10 15:46:03 myhost chat[1902]: abort on (NO ANSWER)
May 10 15:46:03 myhost chat[1902]: abort on (NO CARRIER)
May 10 15:46:03 myhost chat[1902]: abort on (NO DIALTONE)
May 10 15:46:03 myhost chat[1902]: abort on (RINGING)
May 10 15:46:03 myhost chat[1902]: send (ATZ^M)
May 10 15:46:03 myhost chat[1902]: timeout set to 12 seconds
May 10 15:46:03 myhost chat[1902]: expect (OK)
May 10 15:46:03 myhost chat[1902]: ^M
May 10 15:46:03 myhost chat[1902]: OK
May 10 15:46:03 myhost chat[1902]:  -- got it
May 10 15:46:03 myhost chat[1902]: send (AT+CGDCONT=1,"IP","internet"^M)
May 10 15:46:04 myhost chat[1902]: expect (OK)
May 10 15:46:04 myhost chat[1902]: ^M
May 10 15:46:04 myhost chat[1902]: AT+CGDCONT=1,"IP","internet"^M^M
May 10 15:46:04 myhost chat[1902]: OK
May 10 15:46:04 myhost chat[1902]:  -- got it
May 10 15:46:04 myhost chat[1902]: send (ATDT*99#^M)
May 10 15:46:04 myhost chat[1902]: expect (CONNECT)
May 10 15:46:04 myhost chat[1902]: ^M
May 10 15:46:04 myhost chat[1902]: ATDT*99#^M^M
May 10 15:46:04 myhost chat[1902]: CONNECT
May 10 15:46:04 myhost chat[1902]:  -- got it
May 10 15:46:04 myhost pppd[1901]: Serial connection established.
May 10 15:46:04 myhost pppd[1901]: Using interface ppp0
May 10 15:46:04 myhost pppd[1901]: Connect: ppp0 <--> /dev/ttyUSB1
May 10 15:46:06 myhost kernel: usb 3-3.4: USB disconnect, address 4
May 10 15:46:07 myhost kernel: usb 3-3.4: new low speed USB device using ohci_hcd and address 5
May 10 15:46:07 myhost kernel: usb 3-3.4: configuration #1 chosen from 1 choice
May 10 15:46:07 myhost kernel: input: Genius Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3.4/3-3.4:1.0/input/input7
May 10 15:46:07 myhost kernel: generic-usb 0003:0458:003A.0002: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:12.0-3.4/input0
May 10 15:46:35 myhost pppd[1901]: LCP: timeout sending Config-Requests
May 10 15:46:35 myhost pppd[1901]: Connection terminated.
May 10 15:46:36 myhost pppd[1901]: Modem hangup
May 10 15:46:36 myhost pppd[1901]: Exit.
May 10 15:48:02 myhost shutdown[2010]: shutting down for system reboot
May 10 15:48:02 myhost init: Switching to runlevel: 6

как я понял модем отключается при попытке соединения ppp0. так? или я по своей нубости в линуксе ошибаюсь?

[evgsd]

Код: Выделить всё

May 10 15:46:02 myhost pppd[1901]: pppd 2.4.4 started by root, uid 0
May 10 15:46:03 myhost chat[1902]: timeout set to 5 seconds
May 10 15:46:03 myhost chat[1902]: abort on (BUSY)
May 10 15:46:03 myhost chat[1902]: abort on (ERROR)
May 10 15:46:03 myhost chat[1902]: abort on (NO ANSWER)
May 10 15:46:03 myhost chat[1902]: abort on (NO CARRIER)
May 10 15:46:03 myhost chat[1902]: abort on (NO DIALTONE)
May 10 15:46:03 myhost chat[1902]: abort on (RINGING)
May 10 15:46:03 myhost chat[1902]: send (ATZ^M)
May 10 15:46:03 myhost chat[1902]: timeout set to 12 seconds
May 10 15:46:03 myhost chat[1902]: expect (OK)
May 10 15:46:03 myhost chat[1902]: ^M
May 10 15:46:03 myhost chat[1902]: OK
May 10 15:46:03 myhost chat[1902]:  -- got it
May 10 15:46:03 myhost chat[1902]: send (AT+CGDCONT=1,"IP","internet"^M)
May 10 15:46:04 myhost chat[1902]: expect (OK)
May 10 15:46:04 myhost chat[1902]: ^M
May 10 15:46:04 myhost chat[1902]: AT+CGDCONT=1,"IP","internet"^M^M
May 10 15:46:04 myhost chat[1902]: OK
May 10 15:46:04 myhost chat[1902]:  -- got it
May 10 15:46:04 myhost chat[1902]: send (ATDT*99#^M)
May 10 15:46:04 myhost chat[1902]: expect (CONNECT)
May 10 15:46:04 myhost chat[1902]: ^M
May 10 15:46:04 myhost chat[1902]: ATDT*99#^M^M
May 10 15:46:04 myhost chat[1902]: CONNECT
May 10 15:46:04 myhost chat[1902]:  -- got it
May 10 15:46:04 myhost pppd[1901]: Serial connection established.
May 10 15:46:04 myhost pppd[1901]: Using interface ppp0
May 10 15:46:04 myhost pppd[1901]: [b]Connect: ppp0 <--> /dev/ttyUSB1[/b]
May 10 15:46:06 myhost kernel: usb 3-3.4: USB disconnect, address 4
May 10 15:46:07 myhost kernel: usb 3-3.4: new low speed USB device using ohci_hcd and address 5
May 10 15:46:07 myhost kernel: usb 3-3.4: configuration #1 chosen from 1 choice
May 10 15:46:07 myhost kernel: input: Genius Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3.4/3-3.4:1.0/input/input7
May 10 15:46:07 myhost kernel: generic-usb 0003:0458:003A.0002: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:12.0-3.4/input0
May 10 15:46:35 myhost pppd[1901]: LCP: timeout sending Config-Requests
May 10 15:46:35 myhost pppd[1901]: Connection terminated.
May 10 15:46:36 myhost pppd[1901]: Modem hangup
May 10 15:46:36 myhost pppd[1901]: Exit.
May 10 15:48:02 myhost shutdown[2010]: shutting down for system reboot
May 10 15:48:02 myhost init: Switching to runlevel: 6

как я понял модем отключается при попытке соединения ppp0. так? или я по своей нубости в линуксе ошибаюсь?

почему ttyUSB1? это единственное устройство? обычно соединение идет через ttyUSB0. И да, попробуйте еще через wvdial

Код: Выделить всё

[Dialer megafon]
Modem Type = USB Modem
Baut = 460800
New PPPD = yes
Modem = /dev/ttyUSB0
ISDN = 0
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0
Init3 = AT+CGDCONT=1,"IP","internet"
Phone = *99***1#
Username = megafon
Password = megafon
Dial Attempts = 5
Dial Command = ATM1L3DT
Auto Reconnect = on
Abort on Busy = off
Carrier Check = off
Check Def Route = off
Abort on No Dialtone = on
Stupid Mode = off
Idle Seconds = 0
Auto DNS = on

[Earl13]

дa ужe всe сдeлaл чeрeз ттуусб0