Некоторые полноэкранные игры вырубают монитор

[changer0]

Имеем: ноутбук asus K40IJ.
% lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09)
В xorg.conf, соответственно, Driver "intel".
Некоторое время назад teeworlds нормально работал(по-моему, даже ничего связанного с иксами не обновлялось в промежутке между работающим teeworlds и teeworlds, вырубающим монитор), а теперь при запуске вырубает монитор, хотя звук есть. Приходится перезапускать иксы.
То же самое наблюдается и с openarena, и с postal 2 (звук есть - картинки нет).
Urban Terror пока работает нормально.
P.S. Debian lenny с последними апдейтами.
В изначальной установке все работало нормально, а переставлять систему и заново накатывать апдейты/копировать конфиги не хочется.

[deadhead]

логи Xorg что говорят?

[changer0]

Код: Выделить всё

% egrep '\(EE\)|\(WW\)' /var/log/Xorg.0.log
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
(WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
(WW) xf86OpenConsole: setpgid failed: Operation not permitted
(WW) xf86OpenConsole: setsid failed: Operation not permitted
(WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
(WW) intel(0): Bad V_BIOS checksum
(EE) intel(0): SDVO: No active TMDS outputs (0x0000)
(EE) intel(0): SDVO: No active TMDS outputs (0x0000)
(EE) intel(0): Couldn't get SDVO clock rate multiplier
(EE) intel(0): Couldn't get SDVO clock rate multiplier
(EE) intel(0): Output Unknown-1 enabled but has no modes
(EE) intel(0): Output Unknown-2 enabled but has no modes
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x00000400
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000206 to 0x00000236
(WW) intel(0): PIPEASTAT before: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS OFIELD_INT_STATUS EFIELD_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): Register 0x321b (FBC_FENCE_OFF) changed from 0x8c002000 to 0xa8010400
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x00000010 to 0x000c0010
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00606000
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x8000085e
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(EE) intel(0): Couldn't get SDVO clock rate multiplier
(EE) intel(0): Couldn't get SDVO clock rate multiplier
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32

Интересное наблюдение (только для teeworlds): он то вырубает монитор, то нет.
При выключении в /var/log/Xorg.0.log дописывается следующее:

Код: Выделить всё

(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01fff000 (pgoffset 8191)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x02c8d000 (pgoffset 11405)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x02c8e000 (pgoffset 11406)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x033ae000 (pgoffset 13230)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x03ace000 (pgoffset 15054)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
(II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
(II) intel(0): 0x00032000-0x00041fff: exa G965 state buffer (64 kB)
(II) intel(0): 0x00042000-0x00042fff: power context (4 kB)
(II) intel(0): 0x00100000-0x0172cfff: front buffer (22708 kB) X tiled
(II) intel(0): 0x0172d000-0x02c8cfff: exa offscreen (21888 kB)
(II) intel(0): 0x01fff000:            end of stolen memory
(II) intel(0): 0x02c8d000-0x02c8dfff: HW status (4 kB)
(II) intel(0): 0x02c8e000-0x033adfff: back buffer (7296 kB) X tiled
(II) intel(0): 0x033ae000-0x03acdfff: depth buffer (7296 kB) Y tiled
(II) intel(0): 0x03ace000-0x05acdfff: classic textures (32768 kB)
(II) intel(0): 0x10000000:            end of aperture
(WW) intel(0): ESR is 0x00000001
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is off
(II) intel(0):   Display plane B is now disabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe A
(II) intel(0):   Output LVDS is connected to pipe none
(II) intel(0):   Output Unknown-1 is connected to pipe none
(II) intel(0):   Output Unknown-2 is connected to pipe none
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 29
(II) Mouse0: ps2EnableDataReporting: succeeded
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(II) intel(0): xf86UnbindGARTMemory: unbind key 4