d-link 200 rev b1 and slackware

[ARCIS_house]

Hello my friends
I have d-link 200 rev b1 modem and slackware 10.2..
I install eciadsl driver, and bin file. when i write eciadsl-start i give this :

bash-3.00# eciadsl-start
[EciAdsl 1/5] Setting up USB support...
Preliminary USB device filesystem is OK
Loading tun/tap module...
tun loaded successfully

[EciAdsl 2/5] Uploading firmware...
Process skipped .. no more needed
firmware loaded successfully

[EciAdsl 3/5] Synchronization...
OK eciadsl-synch: success
Synchronization successful

[EciAdsl 4/5] Connecting to provider...
Connection successful

[EciAdsl 5/5] Setting up route table...
Waiting for tun0...
ERROR: couldn't set your static IP or your external gateway
If you don't use PPPoE, please check your configuration.

then i write this:

bash-3.00# pppoe -I tap0 -A
pppoe: ioctl(SIOCGIFHWADDR): Session 0: No such device

why this error ? and what i can make ? and why i have not adsl-start command?

my ifconfig -a :

eth0 Link encap:Ethernet HWaddr 00:50:BF:9C:06:28
inet addr:10.0.0.6 Bcast:10.0.0.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:10 Base address:0xd000

eth1 Link encap:Ethernet HWaddr 00:00:00:00:00:00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:10 Base address:0xd400

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:10
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

p.s. Sorry for my english, and stob ja nepisal po ruske, Bi mozite pisat!