Установка ATI Radeon 9800 Pro (Fedora 14)

max2771 · Сообщение **max2771** » 26.04.2011 11:35

Пытаюсь поставить открытый-свободный драйвер на карту Radeon 9800 Pro

[root@localhost max]# find /lib/modules -name radeon.ko
/lib/modules/2.6.35.12-88.fc14.i686/kernel/drivers/gpu/drm/radeon/radeon.ko
/lib/modules/2.6.35.6-45.fc14.i686/kernel/drivers/gpu/drm/radeon/radeon.ko

Правлю xorg.conf, перепробовал кучу вариантов, иксы запускаются через раз, приходиться что-то добавлять, что-то исключать, но драйвер так и не запускается, на текущий момент xorg.conf такой: на счёт секции "Module", не уверен что нужна, но с ней иксы стартуют

Код: Выделить всё

Section "Module"
    Load           "dri"
    Load           "dbe"
    Load           "glx"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
EndSection

Section "Screen"
        Identifier "aticonfig Screen 0"
        Device     "ATI Graphics Adapter 0"
        Monitor    "aticonfig Monitor 0"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection

Section "Device"
#Identifier "Videocard0"
Driver "fglrx"
VendorName "Videocard vendor"
BoardName "ATI Radeon 9800 Pro"
  BoardName    "R350 JI"
  Driver       "radeon"
  Identifier   "Device[0]"
  VendorName   "ATI"
#EndSection
#Section "Device"
  Option       "BusType" "AGP"
  Option       "AGPMode" "8"
  Option       "AccelMethod" "XAA"
  Option "XAANoOffscreenPixmaps" "1"
  Option       "EnablePageFlip" "on"
  Option       "ColorTiling" "on"
  Option       "AccelDFS" "on"
  Option        "hyperz" "true"
    Option         "AllowGLXWithComposite" "true"
    Option         "DRI" "true"
EndSection


Section "DRI"
   Group      "video"
   Mode       0666
EndSection

Попалась информация, как человек прикрутил Radeon 9200 к fedora 13, попробовал использовать его способ в разных вариациях, результат так же нулевой, не запускается драйвер. Вот Xorg.0.log, начало и конец :

Код: Выделить всё

[    30.758]
X.Org X Server 1.9.5
Release Date: 2011-03-17
[    30.758] X Protocol Version 11, Revision 0
[    30.758] Build Operating System: x86-01 2.6.32-71.14.1.el6.x86_64
[    30.758] Current Operating System: Linux localhost.localdomain 2.6.35.12-88.fc14.i686 #1 SMP Thu Mar 31 22:12:38 UTC 2011 i686
[    30.760] Kernel command line: ro root=/dev/mapper/VolGroup-lv_root rd_LVM_LV=VolGroup/lv_root rd_LVM_LV=VolGroup/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=ru_RU.UTF-8 KEYTABLE=us rhgb quiet
[    30.760] Build Date: 18 March 2011  12:23:01AM
[    30.760] Build ID: xorg-x11-server 1.9.5-1.fc14
[    30.760] Current version of pixman: 0.18.4
[    30.760]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    30.760] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    30.760] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 26 10:37:07 2011
[    30.776] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    30.776] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    30.777] (==) No Layout section.  Using the first Screen section.
[    30.777] (**) |-->Screen "aticonfig Screen 0" (0)
[    30.777] (**) |   |-->Monitor "<default monitor>"
[    30.778] (==) No device specified for screen "aticonfig Screen 0".
    Using the first device section listed.
[    30.778] (**) |   |-->Device "Device[0]"
[    30.778] (==) No monitor specified for screen "aticonfig Screen 0".
    Using a default monitor configuration.
[    30.778] (==) Automatically adding devices
[    30.778] (==) Automatically enabling devices
[    30.780] (==) FontPath set to:
    catalogue:/etc/X11/fontpath.d,
    built-ins
[    30.780] (==) ModulePath set to "/usr/lib/xorg/modules"
[    30.782] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    30.782] (II)
***************************************************************
***************************************************************
** Fedora switched to udev-based device detection with       **
** xorg-x11-server-1.7.99.901-1. Custom HAL configuration    **
** stored in /etc/hal/fdi/policy will not be seen by this    **
** server version. If you have such configuration you will   **
** need to update it to the new format.                      **
** For more information, see the Fedora wiki page            **
** https://fedoraproject.org/wiki/Input_device_configuration **
***************************************************************
***************************************************************
[    30.782] (II) Loader magic: 0x822a0c0
[    30.782] (II) Module ABI versions:
[    30.782]     X.Org ANSI C Emulation: 0.4
[    30.782]     X.Org Video Driver: 8.0
[    30.782]     X.Org XInput driver : 11.0
[    30.782]     X.Org Server Extension : 4.0
[    30.785] (--) PCI:*(0:1:0:0) 1002:4e48:1002:0002 rev 0, Mem @ 0xe8000000/134217728, 0xfe9f0000/65536, I/O @ 0x0000c000/256, BIOS @ 0x????????/131072
[    30.786] (--) PCI: (0:1:0:1) 1002:4e68:1002:0003 rev 0, Mem @ 0xe0000000/134217728, 0xfe9e0000/65536, BIOS @ 0x????????/65536
[    30.786] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[    30.786] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[    30.786] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    30.786] (II) "record" will be loaded by default.
[    30.786] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[    30.786] (II) "dri2" will be loaded by default.
[    30.786] (II) LoadModule: "dri"
[    30.788] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    30.810] (II) Module dri: vendor="X.Org Foundation"
[    30.810]     compiled for 1.9.5, module version = 1.0.0
[    30.810]     ABI class: X.Org Server Extension, version 4.0
[    30.810] (II) Loading extension XFree86-DRI
[    30.810] (II) LoadModule: "dbe"
[    30.810] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    30.818] (II) Module dbe: vendor="X.Org Foundation"
[    30.818]     compiled for 1.9.5, module version = 1.0.0
[    30.818]     Module class: X.Org Server Extension
[    30.818]     ABI class: X.Org Server Extension, version 4.0
[    30.818] (II) Loading extension DOUBLE-BUFFER
[    30.818] (II) LoadModule: "glx"
[    30.818] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    30.844] (II) Module glx: vendor="X.Org Foundation"
[    30.844]     compiled for 1.9.5, module version = 1.0.0
[    30.844]     ABI class: X.Org Server Extension, version 4.0
[    30.844] (==) AIGLX enabled
[    30.844] (II) Loading extension GLX
[    30.846] (II) LoadModule: "extmod"
[    30.846] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    30.856] (II) Module extmod: vendor="X.Org Foundation"
[    30.856]     compiled for 1.9.5, module version = 1.0.0
[    30.856]     Module class: X.Org Server Extension
[    30.856]     ABI class: X.Org Server Extension, version 4.0
[    30.856] (II) Loading extension SELinux
[    30.856] (II) Loading extension MIT-SCREEN-SAVER
[    30.856] (II) Loading extension XFree86-VidModeExtension
[    30.856] (II) Loading extension XFree86-DGA
[    30.856] (II) Loading extension DPMS
[    30.856] (II) Loading extension XVideo
[    30.856] (II) Loading extension XVideo-MotionCompensation
[    30.856] (II) Loading extension X-Resource
[    30.856] (II) LoadModule: "record"
[    30.857] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    30.857] (II) Module record: vendor="X.Org Foundation"
[    30.857]     compiled for 1.9.5, module version = 1.13.0
[    30.858]     Module class: X.Org Server Extension
[    30.858]     ABI class: X.Org Server Extension, version 4.0
[    30.858] (II) Loading extension RECORD
[    30.858] (II) LoadModule: "dri2"
[    30.858] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    30.863] (II) Module dri2: vendor="X.Org Foundation"
[    30.863]     compiled for 1.9.5, module version = 1.2.0
[    30.863]     ABI class: X.Org Server Extension, version 4.0
[    30.863] (II) Loading extension DRI2
[    30.863] (II) LoadModule: "radeon"
[    30.864] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    30.909] (II) Module radeon: vendor="X.Org Foundation"
[    30.909]     compiled for 1.8.99.906, module version = 6.13.99
[    30.909]     Module class: X.Org Video Driver
[    30.909]     ABI class: X.Org Video Driver, version 8.0
[    30.911] (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
    ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT
[    55.596] (II) RADEON(0): EDID (in hex):
[    55.596] (II) RADEON(0):     00ffffffffffff00410c2f08d9470300
[    55.596] (II) RADEON(0):     2b0f01031f261e78ee5850a358489c24
[    55.596] (II) RADEON(0):     114f54bfef8081800101010101010101
[    55.596] (II) RADEON(0):     010101010101302a009851002a403070
[    55.596] (II) RADEON(0):     1300520e1100001e000000ff0020425a
[    55.596] (II) RADEON(0):     20203231353030310a20000000fc0050
[    55.596] (II) RADEON(0):     68696c69707320313930530a000000fd
[    55.596] (II) RADEON(0):     00384c1e530e000a20202020202000c9
[    55.596] (II) RADEON(0): EDID vendor "PHL", prod id 2095
[    55.596] (II) RADEON(0): Using hsync ranges from config file
[    55.596] (II) RADEON(0): Using vrefresh ranges from config file
[    55.596] (II) RADEON(0): Printing DDC gathered Modelines:
[    55.596] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    55.596] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    55.596] (II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    55.596] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    55.597] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    55.597] (II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    55.597] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    55.597] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    55.597] (II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    55.597] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    55.597] (II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    55.597] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    55.597] (II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    55.597] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    55.597] (II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    55.597] (II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    55.597] (II) RADEON(0): Printing probed modes for output VGA-0
[    55.597] (II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    55.597] (II) RADEON(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    55.597] (II) RADEON(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    55.597] (II) RADEON(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
[    55.597] (II) RADEON(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    55.597] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    55.597] (II) RADEON(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    55.597] (II) RADEON(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    55.597] (II) RADEON(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    55.597] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    55.597] (II) RADEON(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    55.598] (II) RADEON(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
[    55.598] (II) RADEON(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    55.598] (II) RADEON(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    55.598] (II) RADEON(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    55.598] (II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    55.622] (II) RADEON(0): EDID for output DVI-0
[    55.642] (II) RADEON(0): EDID for output S-video
[    55.701] (II) RADEON(0): EDID for output VGA-0
[    55.701] (II) RADEON(0): Manufacturer: PHL  Model: 82f  Serial#: 215001
[    55.701] (II) RADEON(0): Year: 2005  Week: 43
[    55.701] (II) RADEON(0): EDID Version: 1.3
[    55.701] (II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[    55.701] (II) RADEON(0): Signal levels configurable
[    55.701] (II) RADEON(0): Sync:  Separate  Composite  SyncOnGreenSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
[    55.701] (II) RADEON(0): Max Image Size [cm]: horiz.: 38  vert.: 30
[    55.701] (II) RADEON(0): Gamma: 2.20
[    55.701] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    55.701] (II) RADEON(0): Default color space is primary color space
[    55.701] (II) RADEON(0): First detailed timing is preferred mode
[    55.701] (II) RADEON(0): redX: 0.638 redY: 0.345   greenX: 0.283 greenY: 0.609
[    55.701] (II) RADEON(0): blueX: 0.142 blueY: 0.067   whiteX: 0.309 whiteY: 0.328
[    55.701] (II) RADEON(0): Supported established timings:
[    55.701] (II) RADEON(0): 720x400@70Hz
[    55.701] (II) RADEON(0): 640x480@60Hz
[    55.701] (II) RADEON(0): 640x480@67Hz
[    55.701] (II) RADEON(0): 640x480@72Hz
[    55.701] (II) RADEON(0): 640x480@75Hz
[    55.701] (II) RADEON(0): 800x600@56Hz
[    55.701] (II) RADEON(0): 800x600@60Hz
[    55.701] (II) RADEON(0): 800x600@72Hz
[    55.702] (II) RADEON(0): 800x600@75Hz
[    55.702] (II) RADEON(0): 832x624@75Hz
[    55.702] (II) RADEON(0): 1024x768@60Hz
[    55.702] (II) RADEON(0): 1024x768@70Hz
[    55.702] (II) RADEON(0): 1024x768@75Hz
[    55.702] (II) RADEON(0): 1280x1024@75Hz
[    55.702] (II) RADEON(0): 1152x864@75Hz
[    55.702] (II) RADEON(0): Manufacturer's mask: 0
[    55.702] (II) RADEON(0): Supported standard timings:
[    55.702] (II) RADEON(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    55.702] (II) RADEON(0): Supported detailed timing:
[    55.702] (II) RADEON(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
[    55.702] (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    55.702] (II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    55.702] (II) RADEON(0): Serial No:  BZ  215001
[    55.702] (II) RADEON(0): Monitor name: Philips 190S
[    55.702] (II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[    55.702] (II) RADEON(0): EDID (in hex):
[    55.702] (II) RADEON(0):     00ffffffffffff00410c2f08d9470300
[    55.702] (II) RADEON(0):     2b0f01031f261e78ee5850a358489c24
[    55.702] (II) RADEON(0):     114f54bfef8081800101010101010101
[    55.702] (II) RADEON(0):     010101010101302a009851002a403070
[    55.702] (II) RADEON(0):     1300520e1100001e000000ff0020425a
[    55.702] (II) RADEON(0):     20203231353030310a20000000fc0050
[    55.702] (II) RADEON(0):     68696c69707320313930530a000000fd
[    55.702] (II) RADEON(0):     00384c1e530e000a20202020202000c9
[    55.702] (II) RADEON(0): EDID vendor "PHL", prod id 2095
[    55.702] (II) RADEON(0): Using hsync ranges from config file
[    55.703] (II) RADEON(0): Using vrefresh ranges from config file
[    55.703] (II) RADEON(0): Printing DDC gathered Modelines:
[    55.703] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    55.703] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    55.703] (II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    55.703] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    55.703] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    55.703] (II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    55.703] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    55.703] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    55.703] (II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    55.703] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    55.703] (II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    55.703] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    55.703] (II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    55.703] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    55.703] (II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    55.703] (II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    55.703] (II) RADEON(0): Printing probed modes for output VGA-0
[    55.703] (II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    55.703] (II) RADEON(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    55.703] (II) RADEON(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    55.703] (II) RADEON(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
[    55.703] (II) RADEON(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    55.704] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    55.704] (II) RADEON(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    55.704] (II) RADEON(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    55.704] (II) RADEON(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    55.704] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    55.704] (II) RADEON(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    55.704] (II) RADEON(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
[    55.704] (II) RADEON(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    55.704] (II) RADEON(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    55.704] (II) RADEON(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    55.704] (II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    55.728] (II) RADEON(0): EDID for output DVI-0
[    55.748] (II) RADEON(0): EDID for output S-video
[    60.457] (II) RADEON(0): EDID for output VGA-0
[    60.458] (II) RADEON(0): Manufacturer: PHL  Model: 82f  Serial#: 215001
[    60.458] (II) RADEON(0): Year: 2005  Week: 43
[    60.458] (II) RADEON(0): EDID Version: 1.3
[    60.458] (II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[    60.458] (II) RADEON(0): Signal levels configurable
[    60.458] (II) RADEON(0): Sync:  Separate  Composite  SyncOnGreenSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
[    60.458] (II) RADEON(0): Max Image Size [cm]: horiz.: 38  vert.: 30
[    60.458] (II) RADEON(0): Gamma: 2.20
[    60.458] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    60.458] (II) RADEON(0): Default color space is primary color space
[    60.458] (II) RADEON(0): First detailed timing is preferred mode
[    60.458] (II) RADEON(0): redX: 0.638 redY: 0.345   greenX: 0.283 greenY: 0.609
[    60.458] (II) RADEON(0): blueX: 0.142 blueY: 0.067   whiteX: 0.309 whiteY: 0.328
[    60.458] (II) RADEON(0): Supported established timings:
[    60.458] (II) RADEON(0): 720x400@70Hz
[    60.458] (II) RADEON(0): 640x480@60Hz
[    60.458] (II) RADEON(0): 640x480@67Hz
[    60.458] (II) RADEON(0): 640x480@72Hz
[    60.458] (II) RADEON(0): 640x480@75Hz
[    60.458] (II) RADEON(0): 800x600@56Hz
[    60.477] (II) RADEON(0): 800x600@60Hz
[    60.477] (II) RADEON(0): 800x600@72Hz
[    60.477] (II) RADEON(0): 800x600@75Hz
[    60.477] (II) RADEON(0): 832x624@75Hz
[    60.477] (II) RADEON(0): 1024x768@60Hz
[    60.477] (II) RADEON(0): 1024x768@70Hz
[    60.477] (II) RADEON(0): 1024x768@75Hz
[    60.477] (II) RADEON(0): 1280x1024@75Hz
[    60.477] (II) RADEON(0): 1152x864@75Hz
[    60.477] (II) RADEON(0): Manufacturer's mask: 0
[    60.477] (II) RADEON(0): Supported standard timings:
[    60.477] (II) RADEON(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    60.477] (II) RADEON(0): Supported detailed timing:
[    60.477] (II) RADEON(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
[    60.477] (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    60.477] (II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    60.477] (II) RADEON(0): Serial No:  BZ  215001
[    60.477] (II) RADEON(0): Monitor name: Philips 190S
[    60.477] (II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[    60.477] (II) RADEON(0): EDID (in hex):
[    60.477] (II) RADEON(0):     00ffffffffffff00410c2f08d9470300
[    60.477] (II) RADEON(0):     2b0f01031f261e78ee5850a358489c24
[    60.477] (II) RADEON(0):     114f54bfef8081800101010101010101
[    60.477] (II) RADEON(0):     010101010101302a009851002a403070
[    60.477] (II) RADEON(0):     1300520e1100001e000000ff0020425a
[    60.478] (II) RADEON(0):     20203231353030310a20000000fc0050
[    60.478] (II) RADEON(0):     68696c69707320313930530a000000fd
[    60.478] (II) RADEON(0):     00384c1e530e000a20202020202000c9
[    60.478] (II) RADEON(0): EDID vendor "PHL", prod id 2095
[    60.482] (II) RADEON(0): Using hsync ranges from config file
[    60.482] (II) RADEON(0): Using vrefresh ranges from config file
[    60.483] (II) RADEON(0): Printing DDC gathered Modelines:
[    60.483] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    60.483] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    60.483] (II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    60.483] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    60.483] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    60.483] (II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    60.483] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    60.483] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    60.483] (II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    60.483] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    60.483] (II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    60.483] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    60.483] (II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    60.483] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    60.483] (II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    60.483] (II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    60.483] (II) RADEON(0): Printing probed modes for output VGA-0
[    60.483] (II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    60.483] (II) RADEON(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    60.483] (II) RADEON(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    60.483] (II) RADEON(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
[    60.483] (II) RADEON(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    60.484] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    60.484] (II) RADEON(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    60.484] (II) RADEON(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    60.484] (II) RADEON(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    60.484] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    60.484] (II) RADEON(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    60.484] (II) RADEON(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
[    60.484] (II) RADEON(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    60.484] (II) RADEON(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    60.484] (II) RADEON(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    60.484] (II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    60.621] (II) RADEON(0): EDID for output DVI-0
[    60.808] (II) RADEON(0): EDID for output S-video
[    61.733] (II) RADEON(0): EDID for output VGA-0
[    61.733] (II) RADEON(0): Manufacturer: PHL  Model: 82f  Serial#: 215001
[    61.733] (II) RADEON(0): Year: 2005  Week: 43
[    61.733] (II) RADEON(0): EDID Version: 1.3
[    61.733] (II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[    61.733] (II) RADEON(0): Signal levels configurable
[    61.733] (II) RADEON(0): Sync:  Separate  Composite  SyncOnGreenSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
[    61.733] (II) RADEON(0): Max Image Size [cm]: horiz.: 38  vert.: 30
[    61.733] (II) RADEON(0): Gamma: 2.20
[    61.733] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    61.733] (II) RADEON(0): Default color space is primary color space
[    61.733] (II) RADEON(0): First detailed timing is preferred mode
[    61.733] (II) RADEON(0): redX: 0.638 redY: 0.345   greenX: 0.283 greenY: 0.609
[    61.733] (II) RADEON(0): blueX: 0.142 blueY: 0.067   whiteX: 0.309 whiteY: 0.328
[    61.742] (II) RADEON(0): Supported established timings:
[    61.743] (II) RADEON(0): 720x400@70Hz
[    61.743] (II) RADEON(0): 640x480@60Hz
[    61.743] (II) RADEON(0): 640x480@67Hz
[    61.743] (II) RADEON(0): 640x480@72Hz
[    61.743] (II) RADEON(0): 640x480@75Hz
[    61.744] (II) RADEON(0): 800x600@56Hz
[    61.744] (II) RADEON(0): 800x600@60Hz
[    61.744] (II) RADEON(0): 800x600@72Hz
[    61.744] (II) RADEON(0): 800x600@75Hz
[    61.744] (II) RADEON(0): 832x624@75Hz
[    61.744] (II) RADEON(0): 1024x768@60Hz
[    61.744] (II) RADEON(0): 1024x768@70Hz
[    61.744] (II) RADEON(0): 1024x768@75Hz
[    61.744] (II) RADEON(0): 1280x1024@75Hz
[    61.744] (II) RADEON(0): 1152x864@75Hz
[    61.744] (II) RADEON(0): Manufacturer's mask: 0
[    61.744] (II) RADEON(0): Supported standard timings:
[    61.744] (II) RADEON(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    61.744] (II) RADEON(0): Supported detailed timing:
[    61.744] (II) RADEON(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
[    61.744] (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    61.744] (II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    61.744] (II) RADEON(0): Serial No:  BZ  215001
[    61.744] (II) RADEON(0): Monitor name: Philips 190S
[    61.744] (II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[    61.744] (II) RADEON(0): EDID (in hex):
[    61.744] (II) RADEON(0):     00ffffffffffff00410c2f08d9470300
[    61.744] (II) RADEON(0):     2b0f01031f261e78ee5850a358489c24
[    61.744] (II) RADEON(0):     114f54bfef8081800101010101010101
[    61.744] (II) RADEON(0):     010101010101302a009851002a403070
[    61.744] (II) RADEON(0):     1300520e1100001e000000ff0020425a
[    61.744] (II) RADEON(0):     20203231353030310a20000000fc0050
[    61.744] (II) RADEON(0):     68696c69707320313930530a000000fd
[    61.745] (II) RADEON(0):     00384c1e530e000a20202020202000c9
[    61.745] (II) RADEON(0): EDID vendor "PHL", prod id 2095
[    61.745] (II) RADEON(0): Using hsync ranges from config file
[    61.745] (II) RADEON(0): Using vrefresh ranges from config file
[    61.745] (II) RADEON(0): Printing DDC gathered Modelines:
[    61.745] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    61.745] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    61.745] (II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    61.745] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    61.745] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    61.745] (II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    61.745] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    61.745] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    61.745] (II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    61.745] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    61.745] (II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    61.745] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    61.745] (II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    61.745] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    61.745] (II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    61.745] (II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    61.745] (II) RADEON(0): Printing probed modes for output VGA-0
[    61.745] (II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    61.745] (II) RADEON(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    61.753] (II) RADEON(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    61.753] (II) RADEON(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
[    61.753] (II) RADEON(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    61.753] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    61.753] (II) RADEON(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    61.753] (II) RADEON(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    61.753] (II) RADEON(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    61.753] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    61.753] (II) RADEON(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    61.753] (II) RADEON(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
[    61.753] (II) RADEON(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    61.753] (II) RADEON(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    61.753] (II) RADEON(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    61.753] (II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    61.865] (II) RADEON(0): EDID for output DVI-0
[    61.902] (II) RADEON(0): EDID for output S-video

Vascom · Сообщение **Vascom** » 26.04.2011 12:35

И в чём проблема? По логам всё нормально.

max2771 · Сообщение **max2771** » 26.04.2011 12:58

Vascom писал(а): ↑
26.04.2011 12:35
И в чём проблема? По логам всё нормально.

Так ведь драйвер не запустился, абсолютно никаких изменений в системе не произошло, fps как был 49-50, таким и остался. И ещё, как я определяю установлены дрова или нет (помимо очевидных признаков), у меня стоит kvm switch на два компа, на 1-ом у меня стоит debian, на 2-ом fedora и если на дебиане, при установленном видео, экран растянут нормально, то при переключении на федору он чуть сжат с левого края и изображение немного не в фокусе, и я специально не нажимаю регулировку autoadjust, которая исправляет это положение, чтобы увидеть как растянется экран, когда встанут дрова видео, а после всех экпериментов экран на федоре пока ещё сжат и не в фокусе. У меня до федоры на 2-ом компе побывало множество дистрибутивов и после установки видео, экран, после перезагрузки, сразу растягивался, так что при переходе с одного компа на другой не надо постоянно тыкать автоподстройку.

flank'er · Сообщение **flank'er** » 26.04.2011 13:29

ничего не нормально. в логе xserver'а должно быть сообщение

Код: Выделить всё

(II) RADEON(0): Direct rendering enabled

и еще. на xserver 1.9.5 glxgears у меня показал только 250(80 с вертикальной синхронихацией), когда на 1.7.7 выдавал тысячу. на LQ заявили, что glxgears не является бенчмарком ;)

зы железка - X300

Vascom · Сообщение **Vascom** » 26.04.2011 16:26

По логу иксов драйвер установлен и запущен. Попробуй прописать ему нужное разрешение в конфиг иксов.

max2771 · Сообщение **max2771** » 26.04.2011 18:28

Vascom писал(а): ↑
26.04.2011 16:26
По логу иксов драйвер установлен и запущен. Попробуй прописать ему нужное разрешение в конфиг иксов.

Что-то не заметно, что он запущен. А по подробней можно, что и куда нужно ему прописать ?

Vascom · Сообщение **Vascom** » 27.04.2011 08:16

Покажи вывод glxinfo | grep -E "direct|vendor"

max2771 · Сообщение **max2771** » 27.04.2011 13:46

Vascom писал(а): ↑
27.04.2011 08:16
Покажи вывод glxinfo | grep -E "direct|vendor"

Код: Выделить всё

[root@localhost max]# glxinfo | grep -E "direct|vendor"
direct rendering: Yes
server glx vendor string: SGI
client glx vendor string: Mesa Project and SGI
OpenGL vendor string: X.Org R300 Project
[root@localhost max]#

Видно никаких изменений в системе не произошло с правкой xorg.conf, и конечно драйвер не включается, потому что вывод glxinfo | grep -E "direct|vendor" одинаковый, что при пустом xorg.conf, что при правленном.

Vascom · Сообщение **Vascom** » 27.04.2011 14:37

Всё верно, драйвер работает. Если не веришь, можешь посмотреть вывод lspci -k, там будет написано какой драйвер используется.

max2771 · Сообщение **max2771** » 27.04.2011 15:41

Vascom писал(а): ↑
27.04.2011 14:37
Всё верно, драйвер работает. Если не веришь, можешь посмотреть вывод lspci -k, там будет написано какой драйвер используется.

Это вряд ли, fps кажет 50, значит что-то не так работает. В ссылке которую я привёл выше, человек рассказавает, что нужно включить в xorg.conf для его включения, а я привёл вывод glxinfo | grep -E "direct|vendor" с пустым xorg.conf. И самое главное экран не растянулся, о чём я писал выше. На всех ресурсах посвященных запуску открытого драйвера, говорится о включении в xorg.conf дополнительных секций, а я что добавляю, что не добавляю результат один. Я уверен на 100% драйвер не работает. Я вчера установил на втором винте CentOS, он поддерживает официальный проприетарный драйвер ati-driver-installer-9-3-x86.x86_64.run, и после его установки видно сразу, что дрова встали, а здесь позвольте не согласиться.

flank'er · Сообщение **flank'er** » 27.04.2011 15:51

попробуйте включить KMS(Append "radeon.modeset=1" as a parameter to grub/grub2 line) и потом приведите лог x-сервера
radeonBuildHowTo

max2771 · Сообщение **max2771** » 27.04.2011 16:31

flank'er писал(а): ↑
27.04.2011 15:51
попробуйте включить KMS(Append "radeon.modeset=1" as a parameter to grub/grub2 line) и потом приведите лог x-сервера
radeonBuildHowTo

А куда ее включить ?

flank'er · Сообщение **flank'er** » 27.04.2011 17:03

самое простое добавить в grub в строку параметров ядра, та что начинается с kernel, типа:

Код: Выделить всё

kernel /boot/vmlinuz-2.6.15-1.2054_FC5 ro root=LABEL=/ rhgb quiet

должно быть как-то так

Код: Выделить всё

kernel /boot/vmlinuz-2.6.15-1.2054_FC5 radeon.modeset=1 ro root=LABEL=/ rhgb quiet

ориентируюсь на первый груб, если у Вас второй делайте поправки в соответствии..
после внесения изменений перезагрузитесь,
для контроля смотрите dmesg и Xorg,0.log на предмет KMS

Код: Выделить всё

dmesg| grep KMS
cat /var/log/Xorg.0.log|grep KMS

у меня на ядре 2.6.38 оно само влючилось без всякого указания, и возможно оно виновно в падении fsp в glxfears тесте, но надо пробывать

max2771 · Сообщение **max2771** » 27.04.2011 23:40

А что даёт radeon.modeset=1 при загрузке ? Прописал этот параметр, но никаких изменений вроде не произошло, на dmesg| grep KMS ничего не выдаёт :

Код: Выделить всё

[root@localhost max]# dmesg| grep KMS
[root@localhost max]#

В Xorg.0.log тоже никаких изменений.
А вот, что касается сказанного Vascom, по-поводу включения драйвера, то на команду lspci -k действительно определяет карточку правильно, но по поводу работы драйвера, видно только какие его модули задействованы, но надо ведь от него добиться полной работы

Код: Выделить всё

01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro]
    Subsystem: ATI Technologies Inc Device 0002
    Kernel driver in use: radeon
    Kernel modules: radeon, radeonfb
01:00.1 Display controller: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (Secondary)
    Subsystem: ATI Technologies Inc Device 0003
02:08.0 Ethernet controller: Intel Corporation 82562EZ 10/100 Ethernet Controller (rev 02)
    Subsystem: ASUSTeK Computer Inc. Device 80f8
    Kernel driver in use: e100
    Kernel modules: e100
[root@localhost max]# 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro]
bash: 01:00.0: command not found...
[root@localhost max]# Subsystem: ATI Technologies Inc Device 0002
bash: Subsystem:: command not found...
[root@localhost max]# Kernel driver in use: radeon
bash: Kernel: command not found...
[root@localhost max]# Kernel modules: radeon, radeonfb
bash: Kernel: command not found...
[root@localhost max]# 01:00.1 Display controller: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (Secondary)
bash: syntax error near unexpected token `('
[root@localhost max]# Subsystem: ATI Technologies Inc Device 0003
bash: Subsystem:: command not found...

и видно что работают модули отвечающие за отображение картинки, тем более, что он показывает одно и тоже, и с правленным конфигом и вообще без него.
А вот картинка с этой же видюхой, только из Cent OS, после установки драйвера, картинка резкая и не надо жать autoadjust
и вот из федоры, картинка не резкая и экран слева сжат, по-моему очевидно - дрова не работают.

flank'er · Сообщение **flank'er** » 28.04.2011 03:00

покажите вывод

Код: Выделить всё

zcat /proc/config.gz |grep RADEON

и полный dmesg добавьте при загрузке с параметром radeon.modeset=1

max2771 · Сообщение **max2771** » 28.04.2011 03:18

flank'er писал(а): ↑
28.04.2011 03:00
покажите вывод
Код: Выделить всё
zcat /proc/config.gz |grep RADEON
и полный dmesg добавьте при загрузке с параметром radeon.modeset=1

Код: Выделить всё

[root@localhost max]# zcat /proc/config.gz |grep RADEON
gzip: /proc/config.gz: No such file or directory
[root@localhost max]#

да вроде добавлял уже radeon.modeset=1 при загрузке

flank'er · Сообщение **flank'er** » 28.04.2011 03:22

не густо...
dmesg не будет?

max2771 · Сообщение **max2771** » 28.04.2011 03:35

flank'er писал(а): ↑
28.04.2011 03:22
не густо...
dmesg не будет?

Код: Выделить всё

[    0.089311] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    0.089330] pnp 00:05: [io  0x0061]
[    0.089369] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.089388] pnp 00:06: [io  0x00f0-0x00ff]
[    0.089395] pnp 00:06: [irq 13]
[    0.089435] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.090172] pnp 00:07: [io  0x03f8-0x03ff]
[    0.090179] pnp 00:07: [irq 4]
[    0.090299] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.090982] pnp 00:08: [irq 3]
[    0.090987] pnp 00:08: [dma 0 disabled]
[    0.090991] pnp 00:08: [io  0x02f8-0x02ff]
[    0.091086] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.091866] pnp 00:09: [irq 6]
[    0.091870] pnp 00:09: [dma 2]
[    0.091873] pnp 00:09: [io  0x03f0-0x03f5]
[    0.091877] pnp 00:09: [io  0x03f7]
[    0.091978] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.093098] pnp 00:0a: [io  0x0000-0xffffffff disabled]
[    0.093103] pnp 00:0a: [io  0x0680-0x06ff]
[    0.093107] pnp 00:0a: [io  0x0290-0x0297]
[    0.093181] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.093416] pnp 00:0b: [io  0x0010-0x001f]
[    0.093420] pnp 00:0b: [io  0x0022-0x003f]
[    0.093423] pnp 00:0b: [io  0x0044-0x005f]
[    0.093427] pnp 00:0b: [io  0x0062-0x0063]
[    0.093430] pnp 00:0b: [io  0x0065-0x006f]
[    0.093434] pnp 00:0b: [io  0x0072-0x007f]
[    0.093437] pnp 00:0b: [io  0x0080]
[    0.093441] pnp 00:0b: [io  0x0084-0x0086]
[    0.093444] pnp 00:0b: [io  0x0088]
[    0.093447] pnp 00:0b: [io  0x008c-0x008e]
[    0.093451] pnp 00:0b: [io  0x0090-0x009f]
[    0.093454] pnp 00:0b: [io  0x00a2-0x00bf]
[    0.093458] pnp 00:0b: [io  0x00e0-0x00ef]
[    0.093461] pnp 00:0b: [io  0x04d0-0x04d1]
[    0.093465] pnp 00:0b: [io  0x0800-0x087f]
[    0.093468] pnp 00:0b: [io  0x0000-0xffffffff disabled]
[    0.093472] pnp 00:0b: [io  0x0480-0x04bf]
[    0.093476] pnp 00:0b: [mem 0xfed20000-0xfed8ffff]
[    0.093480] pnp 00:0b: [mem 0xffb00000-0xffbfffff]
[    0.093582] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.093831] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[    0.093836] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[    0.093898] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.094210] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[    0.094215] pnp 00:0d: [mem 0x000c0000-0x000dffff]
[    0.094219] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[    0.094223] pnp 00:0d: [mem 0x00100000-0x5ffeffff]
[    0.094227] pnp 00:0d: [mem 0xfff00000-0xffffffff]
[    0.094294] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.094673] pnp: PnP ACPI: found 14 devices
[    0.094677] ACPI: ACPI bus type pnp unregistered
[    0.094700] system 00:0a: [io  0x0680-0x06ff] has been reserved
[    0.094706] system 00:0a: [io  0x0290-0x0297] has been reserved
[    0.094717] system 00:0b: [io  0x04d0-0x04d1] has been reserved
[    0.094722] system 00:0b: [io  0x0800-0x087f] has been reserved
[    0.094728] system 00:0b: [io  0x0480-0x04bf] has been reserved
[    0.094735] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.094741] system 00:0b: [mem 0xffb00000-0xffbfffff] could not be reserved
[    0.094750] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.094756] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.094766] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.094771] system 00:0d: [mem 0x000c0000-0x000dffff] could not be reserved
[    0.094777] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.094783] system 00:0d: [mem 0x00100000-0x5ffeffff] could not be reserved
[    0.094788] system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved
[    0.132317] pci 0000:00:1f.1: BAR 5: assigned [mem 0x60000000-0x600003ff]
[    0.132329] pci 0000:00:1f.1: BAR 5: set to [mem 0x60000000-0x600003ff] (PCI address [0x60000000-0x600003ff]
[    0.132337] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.132342] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.132350] pci 0000:00:01.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.132357] pci 0000:00:01.0:   bridge window [mem 0xd7f00000-0xf7efffff pref]
[    0.132365] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[    0.132370] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.132378] pci 0000:00:1e.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.132384] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.132408] pci 0000:00:1e.0: setting latency timer to 64
[    0.132414] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.132419] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.132423] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.132428] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.132432] pci_bus 0000:01: resource 2 [mem 0xd7f00000-0xf7efffff pref]
[    0.132436] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.132440] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.132444] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.132448] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[    0.132495] NET: Registered protocol family 2
[    0.132552] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.132772] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.133729] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.134295] TCP: Hash tables configured (established 131072 bind 65536)
[    0.134301] TCP reno registered
[    0.134312] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.134332] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.134502] NET: Registered protocol family 1
[    0.134647] pci 0000:01:00.0: Boot video device
[    0.134667] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[    0.134676] PCI: CLS 16 bytes, default 64
[    0.134782] Trying to unpack rootfs image as initramfs...
[    0.683399] Freeing initrd memory: 12612k freed
[    0.700049] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[    0.700056] apm: overridden by ACPI.
[    0.700277] audit: initializing netlink socket (disabled)
[    0.700301] type=2000 audit(1303947055.698:1): initialized
[    0.716154] highmem bounce pool size: 64 pages
[    0.716163] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.718401] VFS: Disk quotas dquot_6.5.2
[    0.718481] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.719287] msgmni has been set to 1701
[    0.719374] SELinux:  Registering netfilter hooks
[    0.719871] alg: No test for stdrng (krng)
[    0.719978] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.719985] io scheduler noop registered
[    0.719989] io scheduler deadline registered
[    0.720014] io scheduler cfq registered (default)
[    0.720335] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.720375] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.720380] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.720992] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.721001] ACPI: Power Button [PWRB]
[    0.721094] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.721101] ACPI: Power Button [PWRF]
[    0.721277] ACPI: acpi_idle registered with cpuidle
[    0.725597] ERST: Table is not found!
[    0.725667] isapnp: Scanning for PnP cards...
[    1.082460] isapnp: No Plug & Play device found
[    1.082810] Non-volatile memory driver v1.3
[    1.082814] Linux agpgart interface v0.103
[    1.082988] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[    1.086526] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[    1.086662] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.331299] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.575302] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.575760] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.575932] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.577998] brd: module loaded
[    1.578918] loop: module loaded
[    1.579126] ata_piix 0000:00:1f.1: version 2.13
[    1.579147] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[    1.579168] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.579231] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.579354] scsi0 : ata_piix
[    1.579496] scsi1 : ata_piix
[    1.582506] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    1.582512] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    1.582765] Fixed MDIO Bus: probed
[    1.582888] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.582932] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    1.582958] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.582964] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.583087] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.583135] ehci_hcd 0000:00:1d.7: debug port 1
[    1.587015] ehci_hcd 0000:00:1d.7: cache line size of 16 is not supported
[    1.587175] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00
[    1.597017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.597072] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.597077] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.597082] usb usb1: Product: EHCI Host Controller
[    1.597086] usb usb1: Manufacturer: Linux 2.6.35.12-88.fc14.i686 ehci_hcd
[    1.597090] usb usb1: SerialNumber: 0000:00:1d.7
[    1.597272] hub 1-0:1.0: USB hub found
[    1.597280] hub 1-0:1.0: 8 ports detected
[    1.597404] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.597430] uhci_hcd: USB Universal Host Controller Interface driver
[    1.597489] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.597502] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.597508] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.597586] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.597627] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ef00
[    1.597682] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.597688] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.597693] usb usb2: Product: UHCI Host Controller
[    1.597696] usb usb2: Manufacturer: Linux 2.6.35.12-88.fc14.i686 uhci_hcd
[    1.597700] usb usb2: SerialNumber: 0000:00:1d.0
[    1.597855] hub 2-0:1.0: USB hub found
[    1.597864] hub 2-0:1.0: 2 ports detected
[    1.597965] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.597976] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.597982] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.598079] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.598118] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ef20
[    1.598173] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.598178] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.598184] usb usb3: Product: UHCI Host Controller
[    1.598187] usb usb3: Manufacturer: Linux 2.6.35.12-88.fc14.i686 uhci_hcd
[    1.598191] usb usb3: SerialNumber: 0000:00:1d.1
[    1.598340] hub 3-0:1.0: USB hub found
[    1.598348] hub 3-0:1.0: 2 ports detected
[    1.598434] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.598446] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.598451] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.598518] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.598555] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef40
[    1.598602] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.598607] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.598612] usb usb4: Product: UHCI Host Controller
[    1.598616] usb usb4: Manufacturer: Linux 2.6.35.12-88.fc14.i686 uhci_hcd
[    1.598620] usb usb4: SerialNumber: 0000:00:1d.2
[    1.598780] hub 4-0:1.0: USB hub found
[    1.598788] hub 4-0:1.0: 2 ports detected
[    1.598876] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.598887] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.598892] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.598964] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.598992] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef80
[    1.599058] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.599063] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.599067] usb usb5: Product: UHCI Host Controller
[    1.599071] usb usb5: Manufacturer: Linux 2.6.35.12-88.fc14.i686 uhci_hcd
[    1.599075] usb usb5: SerialNumber: 0000:00:1d.3
[    1.599229] hub 5-0:1.0: USB hub found
[    1.599236] hub 5-0:1.0: 2 ports detected
[    1.599425] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.602664] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.602675] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.602832] mice: PS/2 mouse device common for all mice
[    1.603123] rtc_cmos 00:02: RTC can wake from S4
[    1.603203] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.603233] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    1.603421] device-mapper: uevent: version 1.0.3
[    1.603606] device-mapper: ioctl: 4.19.1-ioctl (2010-10-12) initialised: dm-devel@redhat.com
[    1.603747] cpuidle: using governor ladder
[    1.603751] cpuidle: using governor menu
[    1.604131] usbcore: registered new interface driver hiddev
[    1.604158] usbcore: registered new interface driver usbhid
[    1.604162] usbhid: USB HID core driver
[    1.604199] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    1.604410] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[    1.604415] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[    1.604419] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[    1.604545] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.604571] TCP cubic registered
[    1.604574] Initializing XFRM netlink socket
[    1.604592] NET: Registered protocol family 17
[    1.604643] Using IPI No-Shortcut mode
[    1.604809] PM: Resume from disk failed.
[    1.604829] registered taskstats version 1
[    1.605089]   Magic number: 7:934:555
[    1.605148] pci_link PNP0C0F:06: hash matches
[    1.605189] rtc_cmos 00:02: setting system clock to 2011-04-27 23:30:57 UTC (1303947057)
[    1.605241] Initalizing network drop monitor service
[    1.621376] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.739622] ata2.00: ATAPI: HL-DT-ST DVD-ROM GDR-H30N, 1.00, max UDMA/33
[    1.740465] ata1.00: ATA-5: WDC WD400BB-00DEA0, 05.03E05, max UDMA/100
[    1.740471] ata1.00: 78165360 sectors, multi 16: LBA
[    1.740637] ata1.01: HPA detected: current 156299375, native 156301488
[    1.740643] ata1.01: ATA-6: WDC WD800JB-00JJA0, 05.01C05, max UDMA/100
[    1.740648] ata1.01: 156299375 sectors, multi 16: LBA
[    1.745343] ata2.00: configured for UDMA/33
[    1.746356] ata1.00: configured for UDMA/100
[    1.749316] ata1.01: configured for UDMA/100
[    1.749482] scsi 0:0:0:0: Direct-Access     ATA      WDC WD400BB-00DE 05.0 PQ: 0 ANSI: 5
[    1.749729] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.749968] scsi 0:0:1:0: Direct-Access     ATA      WDC WD800JB-00JJ 05.0 PQ: 0 ANSI: 5
[    1.750207] sd 0:0:1:0: Attached scsi generic sg1 type 0
[    1.750440] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    1.750545] sd 0:0:0:0: [sda] Write Protect is off
[    1.750551] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.750614] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.750990] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD-ROM GDR-H30N 1.00 PQ: 0 ANSI: 5
[    1.751265]  sda:sr0: scsi3-mmc drive: 62x/8x cd/rw xa/form2 cdda tray
[    1.752715] Uniform CD-ROM driver Revision: 3.20
[    1.752889] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.752992] sr 1:0:0:0: Attached scsi generic sg2 type 5
[    1.756912] psmouse serio1: ID: 18 00 64
[    1.769145]  sda1 sda2
[    1.769563] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.769600] sd 0:0:1:0: [sdb] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.769696] sd 0:0:1:0: [sdb] Write Protect is off
[    1.769701] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    1.769742] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.770045]  sdb: sdb1 sdb2
[    1.781594] sd 0:0:1:0: [sdb] Attached SCSI disk
[    1.781617] Freeing unused kernel memory: 544k freed
[    1.782302] Write protecting the kernel text: 3772k
[    1.782373] Write protecting the kernel read-only data: 1836k
[    1.810940] dracut: dracut-006-6.fc14
[    1.822364] dracut: rd_NO_LUKS: removing cryptoluks activation
[    1.842216] udev[68]: starting version 161
[    1.899056] usb 1-4: new high speed USB device using ehci_hcd and address 2
[    1.921110] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[    1.978269] [drm] Initialized drm 1.1.0 20060810
[    2.017040] usb 1-4: New USB device found, idVendor=058f, idProduct=6331
[    2.017046] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.017052] usb 1-4: Product: Mass Storage Device
[    2.017055] usb 1-4: Manufacturer: Generic
[    2.017058] usb 1-4: SerialNumber: 058F0O1111B
[    2.046606] Initializing USB Mass Storage driver...
[    2.064035] scsi2 : usb-storage 1-4:1.0
[    2.064387] usbcore: registered new interface driver usb-storage
[    2.064392] USB Mass Storage support registered.
[    2.066774] [drm] radeon defaulting to kernel modesetting.
[    2.066780] [drm] radeon kernel modesetting enabled.
[    2.066856] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.069935] [drm] initializing kernel modesetting (R350 0x1002:0x4E48).
[    2.070084] [drm] register mmio base: 0xFE9F0000
[    2.070088] [drm] register mmio size: 65536
[    2.080372] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[    2.080399] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
[    2.080443] radeon 0000:01:00.0: putting AGP V3 device into 8x mode
[    2.080460] radeon 0000:01:00.0: GTT: 64M 0xF8000000 - 0xFBFFFFFF
[    2.080466] [drm] Generation 1 PCI interface in multifunction mode
[    2.080470] [drm] Limiting VRAM to one aperture
[    2.080476] radeon 0000:01:00.0: VRAM: 128M 0xE8000000 - 0xEFFFFFFF (128M used)
[    2.080518] [drm] radeon: irq initialized.
[    2.080653] [drm] Detected VRAM RAM=128M, BAR=128M
[    2.080659] [drm] RAM width 256bits DDR
[    2.080772] [TTM] Zone  kernel: Available graphics memory: 435936 kiB.
[    2.080777] [TTM] Zone highmem: Available graphics memory: 771396 kiB.
[    2.080781] [TTM] Initializing pool allocator.
[    2.080812] [drm] radeon: 128M of VRAM memory ready
[    2.080817] [drm] radeon: 64M of GTT memory ready.
[    2.080866] [drm] radeon: 2 quad pipes, 1 Z pipes initialized.
[    2.081525] [drm] Loading R300 Microcode
[    2.086666] [drm] radeon: ring at 0x00000000F8000000
[    2.086691] [drm] ring test succeeded in 1 usecs
[    2.087224] [drm] radeon: ib pool ready.
[    2.087346] [drm] ib test succeeded in 0 usecs
[    2.088051] [drm] Default TV standard: NTSC
[    2.088056] [drm] 27.000000000 MHz TV ref clk
[    2.088061] [drm] DFP table revision: 3
[    2.088598] [drm] Default TV standard: NTSC
[    2.088603] [drm] 27.000000000 MHz TV ref clk
[    2.088701] [drm] Radeon Display Connectors
[    2.088706] [drm] Connector 0:
[    2.088709] [drm]   VGA
[    2.088713] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[    2.088716] [drm]   Encoders:
[    2.088719] [drm]     CRT1: INTERNAL_DAC1
[    2.088722] [drm] Connector 1:
[    2.088724] [drm]   DVI-I
[    2.088726] [drm]   HPD1
[    2.088730] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[    2.088733] [drm]   Encoders:
[    2.088736] [drm]     CRT2: INTERNAL_DAC2
[    2.088739] [drm]     DFP1: INTERNAL_TMDS1
[    2.088741] [drm] Connector 2:
[    2.088744] [drm]   S-video
[    2.088746] [drm]   Encoders:
[    2.088748] [drm]     TV1: INTERNAL_DAC2
[    2.250284] [drm] fb mappable at 0xE8040000
[    2.250289] [drm] vram apper at 0xE8000000
[    2.250292] [drm] size 5242880
[    2.250295] [drm] fb depth is 24
[    2.250298] [drm]    pitch is 5120
[    2.250510] fbcon: radeondrmfb (fb0) is primary device
[    2.327553] Console: switching to colour frame buffer device 160x64
[    2.351427] fb0: radeondrmfb frame buffer device
[    2.351430] drm: registered panic notifier
[    2.351437] Slow work thread pool: Starting up
[    2.351518] Slow work thread pool: Ready
[    2.351528] [drm] Initialized radeon 2.5.0 20080528 for 0000:01:00.0 on minor 0
[    2.409635] dracut: Starting plymouth daemon
[    2.711886] dracut: rd_NO_DM: removing DM RAID activation
[    2.719690] dracut: rd_NO_MD: removing MD RAID activation
[    3.101307] scsi 2:0:0:0: Direct-Access     Multi    Flash Reader     1.00 PQ: 0 ANSI: 0
[    3.102394] sd 2:0:0:0: Attached scsi generic sg3 type 0
[    3.858168] sd 2:0:0:0: [sdc] 3813376 512-byte logical blocks: (1.95 GB/1.81 GiB)
[    3.860158] sd 2:0:0:0: [sdc] Write Protect is off
[    3.860163] sd 2:0:0:0: [sdc] Mode Sense: 03 00 00 00
[    3.860167] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[    3.868408] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[    3.868425]  sdc: sdc1
[    3.876563] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[    3.876573] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[    5.750491] dracut: Scanning devices sda2 sdb2  for LVM logical volumes VolGroup/lv_root VolGroup/lv_swap
[    5.804497] dracut: inactive '/dev/VolGroup/lv_root' [50.00 GiB] inherit
[    5.804637] dracut: inactive '/dev/VolGroup/lv_home' [21.06 GiB] inherit
[    5.804768] dracut: inactive '/dev/VolGroup/lv_swap' [2.97 GiB] inherit
[    5.804905] dracut: inactive '/dev/VolGroup00/LogVol00' [34.19 GiB] inherit
[    5.805071] dracut: inactive '/dev/VolGroup00/LogVol01' [2.97 GiB] inherit
[    6.277315] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    6.351519] dracut: Mounted root filesystem /dev/mapper/VolGroup-lv_root
[    6.495078] dracut: Loading SELinux policy
[    6.853827] type=1404 audit(1303947062.747:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[    6.996114] SELinux: 2048 avtab hash slots, 215688 rules.
[    7.116082] SELinux: 2048 avtab hash slots, 215688 rules.
[    7.948897] SELinux:  9 users, 14 roles, 3521 types, 184 bools, 1 sens, 1024 cats
[    7.948906] SELinux:  81 classes, 215688 rules
[    7.958304] SELinux:  Completing initialization.
[    7.958310] SELinux:  Setting up existing superblocks.
[    7.958330] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    7.958350] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[    7.958881] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[    7.958896] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[    7.958915] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    7.958950] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[    7.960501] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[    7.960514] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[    7.962029] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[    7.962050] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[    7.962057] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[    7.962111] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[    7.962125] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[    7.962145] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[    7.962172] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[    7.962187] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    7.962794] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    7.962839] SELinux: initialized (dev dm-0, type ext4), uses xattr
[    7.966509] type=1403 audit(1303947063.859:3): policy loaded auid=4294967295 ses=4294967295
[    8.851530] dracut: Switching root
[    9.710514] readahead: starting
[   11.250155] udev[415]: starting version 161
[   12.217220] intel_rng: FWH not detected
[   12.317194] microcode: CPU0 sig=0xf27, pf=0x4, revision=0x37
[   12.317542] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   12.444935] iTCO_vendor_support: vendor-support=0
[   12.465015] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[   12.465426] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   12.466112] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
[   12.466233] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   12.476448] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[   12.476455] e100: Copyright(c) 1999-2006 Intel Corporation
[   12.476517] e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[   12.499674] e100 0000:02:08.0: PME# disabled
[   12.583524] e100 0000:02:08.0: eth0: addr 0xfeaff000, irq 20, MAC addr 00:0e:a6:ab:ba:bb
[   13.706944] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   13.707030] Intel ICH 0000:00:1f.5: setting latency timer to 64
[   14.136030] intel8x0_measure_ac97_clock: measured 50677 usecs (2442 samples)
[   14.136036] intel8x0: clocking to 48000
[   18.524473] EXT4-fs (dm-0): re-mounted. Opts: (null)
[   19.442772] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[   19.452849] SELinux: initialized (dev sdb1, type ext4), uses xattr
[   19.505854] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[   19.505876] SELinux: initialized (dev dm-2, type ext4), uses xattr
[   21.633821] Adding 3112956k swap on /dev/mapper/VolGroup-lv_swap.  Priority:-1 extents:1 across:3112956k
[   21.640368] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
[   23.501955] NET: Registered protocol family 10
[   23.502311] lo: Disabled Privacy Extensions
[   23.528373] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   24.271212] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
[   25.288139] e100 0000:02:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex
[   25.288403] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   25.288796] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   25.926989] RPC: Registered udp transport module.
[   25.926995] RPC: Registered tcp transport module.
[   25.926998] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   25.945974] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
[   35.618020] eth0: no IPv6 routers present
[  148.317562] fuse init (API version 7.14)
[  148.419743] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
[  148.428706] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[  162.286914] SELinux: initialized (dev sdc1, type vfat), uses genfs_contexts
[  163.248664] ISO 9660 Extensions: Microsoft Joliet Level 3
[  163.437614] ISO 9660 Extensions: RRIP_1991A
[  163.437821] SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
[  168.715976] lo: Disabled Privacy Extensions
[  168.716241] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[root@localhost max]#

flank'er · Сообщение **flank'er** » 28.04.2011 07:04

теперь в grub нужно поменять radeon.modeset=1 на radeon.modeset=0 и после перезагрузки замерить разницу

Код: Выделить всё

dmesg|grep drm
cat /var/log/Xorg.0.log|grep RADEON

и еще интересует

Код: Выделить всё

uname -r
cat /boot/config* |grep RADEON

ну и fps в glxgears замерте
если результата не будет в testing
http://mirror.yandex.ru/fedora/linux/relea...86/os/Packages/
лежат свежие пакеты ядра
kernel-2.6.38.2-9.fc15.i686.rpm
kernel-PAE-2.6.38.2-9.fc15.i686.rpm
kernel-PAE-devel-2.6.38.2-9.fc15.i686.rpm
kernel-devel-2.6.38.2-9.fc15.i686.rpm
kernel-headers-2.6.38.2-9.fc15.i686.rpm
обновите их и замерте результат

unixforum.org

Установка ATI Radeon 9800 Pro (Fedora 14)

Установка ATI Radeon 9800 Pro

Re: Установка ATI Radeon 9800 Pro

Re: Установка ATI Radeon 9800 Pro

Re: Установка ATI Radeon 9800 Pro

Re: Установка ATI Radeon 9800 Pro

Re: Установка ATI Radeon 9800 Pro

Re: Установка ATI Radeon 9800 Pro

Re: Установка ATI Radeon 9800 Pro

Re: Установка ATI Radeon 9800 Pro

Re: Установка ATI Radeon 9800 Pro

Re: Установка ATI Radeon 9800 Pro

Re: Установка ATI Radeon 9800 Pro

Re: Установка ATI Radeon 9800 Pro

Re: Установка ATI Radeon 9800 Pro

Re: Установка ATI Radeon 9800 Pro

Re: Установка ATI Radeon 9800 Pro

Re: Установка ATI Radeon 9800 Pro

Re: Установка ATI Radeon 9800 Pro

Re: Установка ATI Radeon 9800 Pro