Черный экран Gnome
Модератор: Модераторы разделов
Черный экран Gnome
nvidia 450 драйверы стоят
KDE 4.10 запускаеться нормально. без косяков.все работает
захотел запустить Gnome черный экран
удалал ~/.gnome*
куда копать
наставть на путь истеный) ...
- phantomSSL
- Сообщения: 418
- Статус: сдаются в аренду складские помещения в /var/spool
- ОС: Archlinux && BSD && MacOS
Re: Черный экран Gnome
Re: Черный экран Gnome
- phantomSSL
- Сообщения: 418
- Статус: сдаются в аренду складские помещения в /var/spool
- ОС: Archlinux && BSD && MacOS
Re: Черный экран Gnome
это что? при чем тут gdm? я вас просил сессию гнома запустить..
Re: Черный экран Gnome
Вот
UP
еще нашел
Внимание: Начиная с openSUSE версии 12.3 для корректной работы проприетарного видеодрайвера необходимо добавить пользователя под которым вы работаете в группу video. Это можно сделать с помощью модуля YaST Управление пользователями и группами.
попробую добавить и обновить драйверы
up не помогло
- Brainsburn
- Сообщения: 950
- Статус: /
- ОС: Gentoo
- Контактная информация:
Re: Черный экран Gnome
Re: Черный экран Gnome
nvidia?
Afro on my head, I'm a black Samurai
Number One, I bring my whole nation alive
Escape death, to become immortalized
Re: Черный экран Gnome
Re: Черный экран Gnome
Покажите выводы: (можно и из KDE)
Код: Выделить всё
uname -a
rpm -qa | grep nvidia
rpm -qa | grep kernel
cat /etc/X11/xorg.conf
cat /etc/group | grep video
cat /etc/modprobe.d/50-blacklist.conf | grep nouveau
cat /etc/sysconfig/kernel | grep NO_KMS_IN_INITRD
nvidia-settings -v
grep -i driver /var/log/Xorg.0.log
glxinfo | grep render
От рута:
Код: Выделить всё
cat /etc/default/grub | grep GRUB_CMDLINE_LINUX_DEFAULT
cat /boot/grub2/grub.cfg
Re: Черный экран Gnome
Код: Выделить всё
darkxakep@linux-ocfh:~$ uname -a
Linux linux-ocfh.site 3.7.10-1.1-desktop #1 SMP PREEMPT Thu Feb 28 15:06:29 UTC 2013 (82d3f21) i686 athlon i386 GNU/Linux
Код: Выделить всё
darkxakep@linux-ocfh:~$ rpm -qa | grep nvidia
nvidia-gfxG03-kmp-desktop-310.32_k3.7.9_1.1-15.3.i586
nvidia-computeG03-310.32-15.1.i586
x11-video-nvidiaG03-310.32-15.1.i586
Код: Выделить всё
darkxakep@linux-ocfh:~$ rpm -qa | grep kernel
kernel-desktop-3.7.10-1.1.1.i686
kernel-devel-3.7.10-1.1.1.noarch
kernel-desktop-devel-3.7.10-1.1.1.i686
kernel-firmware-20130114git-1.2.1.noarch
Код: Выделить всё
darkxakep@linux-ocfh:~$ cat /etc/X11/xorg.conf
cat: /etc/X11/xorg.conf: Нет такого файла или каталога
Код: Выделить всё
darkxakep@linux-ocfh:~$ cat /etc/group | grep video
video:x:33:darkxakep,gdm
Код: Выделить всё
darkxakep@linux-ocfh:~$ cat /etc/sysconfig/kernel | grep NO_KMS_IN_INITRD
NO_KMS_IN_INITRD="yes"
Код: Выделить всё
nvidia-settings -v
nvidia-settings: version 310.32 (buildmeister@swio-display-x86-rhel47-09) Mon Jan 14 15:46:37 PST 2013
The NVIDIA X Server Settings tool.
This program is used to configure the NVIDIA Linux graphics driver.
For more detail, please see the nvidia-settings(1) man page.
Copyright (C) 2004 - 2010 NVIDIA Corporation.
Код: Выделить всё
darkxakep@linux-ocfh:~$ grep -i driver /var/log/Xorg.0.log
[ 22.954] X.Org Video Driver: 13.1
[ 22.954] X.Org XInput driver : 18.0
[ 25.048] (==) Matched nvidia as autoconfigured driver 0
[ 25.048] (==) Matched nouveau as autoconfigured driver 1
[ 25.048] (==) Matched nv as autoconfigured driver 2
[ 25.048] (==) Matched modesetting as autoconfigured driver 3
[ 25.048] (==) Matched fbdev as autoconfigured driver 4
[ 25.048] (==) Matched vesa as autoconfigured driver 5
[ 25.048] (==) Assigned the driver to the xf86ConfigLayout
[ 25.048] (II) Loading /usr/lib/xorg/modules/updates/drivers/nvidia_drv.so
[ 25.049] Module class: X.Org Video Driver
[ 25.050] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 25.050] Module class: X.Org Video Driver
[ 25.050] ABI class: X.Org Video Driver, version 13.1
[ 25.051] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
[ 25.051] Module class: X.Org Video Driver
[ 25.051] ABI class: X.Org Video Driver, version 13.1
[ 25.051] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 25.051] Module class: X.Org Video Driver
[ 25.051] ABI class: X.Org Video Driver, version 13.1
[ 25.051] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 25.052] Module class: X.Org Video Driver
[ 25.052] ABI class: X.Org Video Driver, version 13.1
[ 25.052] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 25.052] Module class: X.Org Video Driver
[ 25.052] ABI class: X.Org Video Driver, version 13.1
[ 25.052] (II) NVIDIA dlloader X Driver 310.32 Mon Jan 14 14:40:21 PST 2013
[ 25.052] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 25.052] (II) NOUVEAU driver
[ 25.052] (II) NOUVEAU driver for NVIDIA chipset families :
[ 25.052] (II) NOUVEAU driver
[ 25.052] (II) NOUVEAU driver for NVIDIA chipset families :
[ 25.053] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 25.053] (II) FBDEV: driver for framebuffer: fbdev
[ 25.053] (II) VESA: driver for VESA chipsets: vesa
[ 25.055] ABI class: X.Org Video Driver, version 13.1
[ 25.565] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 25.669] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 25.808] Module class: X.Org XInput Driver
[ 25.808] ABI class: X.Org XInput driver, version 18.0
[ 25.808] (II) Using input driver 'evdev' for 'Power Button'
[ 25.843] (II) Using input driver 'evdev' for 'Power Button'
[ 25.843] (II) Using input driver 'evdev' for 'USB OPTICAL MOUSE'
[ 25.844] (II) No input driver specified, ignoring this device.
[ 25.845] (II) Using input driver 'evdev' for 'BTC USB Multimedia Keyboard'
[ 25.846] (II) Using input driver 'evdev' for 'BTC USB Multimedia Keyboard'
[ 25.847] (II) Using input driver 'evdev' for 'A4 TECH USB2.0 PC Camera J'
[ 25.847] (II) No input driver specified, ignoring this device.
[ 25.848] (II) No input driver specified, ignoring this device.
[ 25.848] (II) No input driver specified, ignoring this device.
[ 25.848] (II) No input driver specified, ignoring this device.
[ 25.848] (II) No input driver specified, ignoring this device.
[ 25.849] (II) No input driver specified, ignoring this device.
[ 25.849] (II) No input driver specified, ignoring this device.
[ 25.849] (II) No input driver specified, ignoring this device.
[ 25.850] (II) No input driver specified, ignoring this device.
[ 25.850] (II) No input driver specified, ignoring this device.
[ 25.850] (II) No input driver specified, ignoring this device.
[ 25.850] (II) No input driver specified, ignoring this device.
[ 25.851] (II) No input driver specified, ignoring this device.
[ 25.851] (II) No input driver specified, ignoring this device.
[ 428.352] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
Код: Выделить всё
darkxakep@linux-ocfh:~$ glxinfo | grep render
direct rendering: Yes
OpenGL renderer string: GeForce GTS 450/PCIe/SSE2/3DNOW!
GL_NV_conditional_render, GL_NV_copy_depth_to_color, GL_NV_copy_image,
GL_NV_parameter_buffer_object2, GL_NV_path_rendering,
GL_NVX_conditional_render, GL_NVX_gpu_memory_info,
GL_OES_depth_texture, GL_OES_element_index_uint, GL_OES_fbo_render_mipmap,
Код: Выделить всё
cat /etc/default/grub | grep GRUB_CMDLINE_LINUX_DEFAULT
GRUB_CMDLINE_LINUX_DEFAULT=" resume=/dev/disk/by-id/ata-ST380011A_3JV4N1KK-part1 splash=silent quiet showopts"
Код: Выделить всё
linux-ocfh:/home/darkxakep # cat /boot/grub2/grub.cfg
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub2-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="${saved_entry}"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' b7fb2340-3e47-49c7-bbb0-ce2d7032ca7f
else
search --no-floppy --fs-uuid --set=root b7fb2340-3e47-49c7-bbb0-ce2d7032ca7f
fi
font="/usr/share/grub2/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=ru_RU
insmod gettext
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' b7fb2340-3e47-49c7-bbb0-ce2d7032ca7f
else
search --no-floppy --fs-uuid --set=root b7fb2340-3e47-49c7-bbb0-ce2d7032ca7f
fi
insmod gfxmenu
loadfont ($root)/boot/grub2/themes/openSUSE/DejaVuSans-Bold14.pf2
loadfont ($root)/boot/grub2/themes/openSUSE/DejaVuSans10.pf2
loadfont ($root)/boot/grub2/themes/openSUSE/DejaVuSans12.pf2
loadfont ($root)/boot/grub2/themes/openSUSE/ascii.pf2
insmod png
set theme=($root)/boot/grub2/themes/openSUSE/theme.txt
export theme
if [ x${boot_once} = xtrue ]; then
set timeout=0
elif sleep --interruptible 0 ; then
set timeout=8
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'openSUSE 12.3' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-b7fb2340-3e47-49c7-bbb0-ce2d7032ca7f' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' b7fb2340-3e47-49c7-bbb0-ce2d7032ca7f
else
search --no-floppy --fs-uuid --set=root b7fb2340-3e47-49c7-bbb0-ce2d7032ca7f
fi
echo 'Loading Linux 3.7.10-1.1-desktop ...'
linux /boot/vmlinuz-3.7.10-1.1-desktop root=UUID=b7fb2340-3e47-49c7-bbb0-ce2d7032ca7f resume=/dev/disk/by-id/ata-ST380011A_3JV4N1KK-part1 splash=silent quiet showopts
echo 'Loading initial ramdisk ...'
initrd /boot/initrd-3.7.10-1.1-desktop
}
submenu 'Advanced options for openSUSE 12.3' $menuentry_id_option 'gnulinux-advanced-b7fb2340-3e47-49c7-bbb0-ce2d7032ca7f' {
menuentry 'openSUSE 12.3, with Linux 3.7.10-1.1-desktop' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.7.10-1.1-desktop-advanced-b7fb2340-3e47-49c7-bbb0-ce2d7032ca7f' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' b7fb2340-3e47-49c7-bbb0-ce2d7032ca7f
else
search --no-floppy --fs-uuid --set=root b7fb2340-3e47-49c7-bbb0-ce2d7032ca7f
fi
echo 'Loading Linux 3.7.10-1.1-desktop ...'
linux /boot/vmlinuz-3.7.10-1.1-desktop root=UUID=b7fb2340-3e47-49c7-bbb0-ce2d7032ca7f resume=/dev/disk/by-id/ata-ST380011A_3JV4N1KK-part1 splash=silent quiet showopts
echo 'Loading initial ramdisk ...'
initrd /boot/initrd-3.7.10-1.1-desktop
}
menuentry 'openSUSE 12.3, with Linux 3.7.10-1.1-desktop (recovery mode)' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.7.10-1.1-desktop-recovery-b7fb2340-3e47-49c7-bbb0-ce2d7032ca7f' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' b7fb2340-3e47-49c7-bbb0-ce2d7032ca7f
else
search --no-floppy --fs-uuid --set=root b7fb2340-3e47-49c7-bbb0-ce2d7032ca7f
fi
echo 'Loading Linux 3.7.10-1.1-desktop ...'
linux /boot/vmlinuz-3.7.10-1.1-desktop root=UUID=b7fb2340-3e47-49c7-bbb0-ce2d7032ca7f showopts apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe
echo 'Loading initial ramdisk ...'
initrd /boot/initrd-3.7.10-1.1-desktop
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/20_ppc_terminfo ###
### END /etc/grub.d/20_ppc_terminfo ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Ubuntu Raring Ringtail (development branch) (13.04) (on /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-1ee63e8f-73d6-476d-9754-f79179508248' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 --hint='hd1,msdos1' 1ee63e8f-73d6-476d-9754-f79179508248
else
search --no-floppy --fs-uuid --set=root 1ee63e8f-73d6-476d-9754-f79179508248
fi
linux /boot/vmlinuz-3.8.0-14-generic root=UUID=1ee63e8f-73d6-476d-9754-f79179508248 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.8.0-14-generic
}
submenu 'Advanced options for Ubuntu Raring Ringtail (development branch) (13.04) (on /dev/sdb1)' $menuentry_id_option 'osprober-gnulinux-advanced-1ee63e8f-73d6-476d-9754-f79179508248' {
menuentry 'Ubuntu (on /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.8.0-14-generic--1ee63e8f-73d6-476d-9754-f79179508248' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 --hint='hd1,msdos1' 1ee63e8f-73d6-476d-9754-f79179508248
else
search --no-floppy --fs-uuid --set=root 1ee63e8f-73d6-476d-9754-f79179508248
fi
linux /boot/vmlinuz-3.8.0-14-generic root=UUID=1ee63e8f-73d6-476d-9754-f79179508248 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.8.0-14-generic
}
menuentry 'Ubuntu, с Linux 3.8.0-14-generic (on /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.8.0-14-generic--1ee63e8f-73d6-476d-9754-f79179508248' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 --hint='hd1,msdos1' 1ee63e8f-73d6-476d-9754-f79179508248
else
search --no-floppy --fs-uuid --set=root 1ee63e8f-73d6-476d-9754-f79179508248
fi
linux /boot/vmlinuz-3.8.0-14-generic root=UUID=1ee63e8f-73d6-476d-9754-f79179508248 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.8.0-14-generic
}
menuentry 'Ubuntu, с Linux 3.8.0-14-generic (режим восстановления) (on /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.8.0-14-generic--1ee63e8f-73d6-476d-9754-f79179508248' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 --hint='hd1,msdos1' 1ee63e8f-73d6-476d-9754-f79179508248
else
search --no-floppy --fs-uuid --set=root 1ee63e8f-73d6-476d-9754-f79179508248
fi
linux /boot/vmlinuz-3.8.0-14-generic root=UUID=1ee63e8f-73d6-476d-9754-f79179508248 ro recovery nomodeset
initrd /boot/initrd.img-3.8.0-14-generic
}
}
menuentry 'Windows Vista (loader) (on /dev/sdc1)' --class windows --class os $menuentry_id_option 'osprober-chain-78CC3AF9CC3AB16C' {
insmod part_msdos
insmod ntfs
set root='hd2,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos1 --hint-efi=hd2,msdos1 --hint-baremetal=ahci2,msdos1 --hint='hd2,msdos1' 78CC3AF9CC3AB16C
else
search --no-floppy --fs-uuid --set=root 78CC3AF9CC3AB16C
fi
chainloader +1
}
menuentry 'Windows 7 (loader) (on /dev/sde1)' --class windows --class os $menuentry_id_option 'osprober-chain-8600669500668BCD' {
insmod part_msdos
insmod ntfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint='hd4,msdos1' 8600669500668BCD
else
search --no-floppy --fs-uuid --set=root 8600669500668BCD
fi
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/90_persistent ###
### END /etc/grub.d/90_persistent ###
Re: Черный экран Gnome
Выполните:
Код: Выделить всё
# echo "blacklist nouveau" >> /etc/modprobe.d/50-blacklist.conf
Далее выполните:
В файле:
Код: Выделить всё
/etc/default/grub
найти строку:
Код: Выделить всё
GRUB_CMDLINE_LINUX_DEFAULT=""
Прописываем nomodeset:
Код: Выделить всё
GRUB_CMDLINE_LINUX_DEFAULT="nomodeset"
(остальные параметры через пробел в эти же кавычки"
пример:
Код: Выделить всё
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset"
Далее:
Код: Выделить всё
# grub2-mkconfig -o /boot/grub2/grub.cfg
Или проделать вышеописанное через Яст - Загрузка.
Re: Черный экран Gnome
да спасибо работает
если не сложно, то можно пояснить что было ? и какое отношение загрузчик имеет к видео ?
Re: Черный экран Gnome
Re: Черный экран Gnome
Код: Выделить всё
dima@dark:~> uname -a
Linux dark.suse 3.9.8-15.gf3348a8-pae #1 SMP Thu Jun 27 23:52:25 UTC 2013 (f3348a8) i686 athlon i386 GNU/Linux
Код: Выделить всё
dima@dark:~> rpm -qa | grep nvidia
nvidia-computeG03-319.17-12.1.i586
x11-video-nvidiaG03-319.17-12.1.i586
nvidia-gfxG03-kmp-pae-319.17_k3.7.10_1.1-12.1.i586
Код: Выделить всё
dima@dark:~> rpm -qa | grep kernel
kernel-desktop-3.9.8-15.1.gf3348a8.i686
kernel-pae-devel-3.9.8-15.1.gf3348a8.i686
kernel-default-devel-3.9.8-15.1.gf3348a8.i586
kernel-pae-3.9.8-15.1.gf3348a8.i686
kernel-desktop-devel-3.9.8-15.1.gf3348a8.i686
kernel-devel-3.9.8-15.1.gf3348a8.noarch
kernel-firmware-20130114git-1.2.1.noarch
kernel-pae-base-3.7.10-1.16.1.i686
kernel-default-3.9.8-15.1.gf3348a8.i586
Код: Выделить всё
dima@dark:~> cat /etc/X11/xorg.conf
cat: /etc/X11/xorg.conf: Нет такого файла или каталога
Код: Выделить всё
dima@dark:~> cat /etc/group | grep video
video:x:33:dima,gdm
Код: Выделить всё
dima@dark:~> cat /etc/modprobe.d/50-blacklist.conf | grep nouveau
blacklist nouveau
Код: Выделить всё
dima@dark:~> cat /etc/sysconfig/kernel | grep NO_KMS_IN_INITRD
NO_KMS_IN_INITRD="yes"
Код: Выделить всё
dima@dark:~> nvidia-settings -v
nvidia-settings: version 319.17 (buildmeister@swio-display-x86-rhel47-10) Thu Apr 25
21:55:50 PDT 2013
The NVIDIA X Server Settings tool.
This program is used to configure the NVIDIA Linux graphics driver.
For more detail, please see the nvidia-settings(1) man page.
Copyright © 2004 - 2010 NVIDIA Corporation.
Код: Выделить всё
dima@dark:~> grep -i driver /var/log/Xorg.0.log
[ 18.192] X.Org Video Driver: 13.1
[ 18.192] X.Org XInput driver : 18.0
[ 21.150] (==) Matched nvidia as autoconfigured driver 0
[ 21.150] (==) Matched nouveau as autoconfigured driver 1
[ 21.150] (==) Matched nv as autoconfigured driver 2
[ 21.150] (==) Matched modesetting as autoconfigured driver 3
[ 21.150] (==) Matched fbdev as autoconfigured driver 4
[ 21.150] (==) Matched vesa as autoconfigured driver 5
[ 21.150] (==) Assigned the driver to the xf86ConfigLayout
[ 21.151] (II) Loading /usr/lib/xorg/modules/updates/drivers/nvidia_drv.so
[ 21.152] Module class: X.Org Video Driver
[ 21.162] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 21.163] Module class: X.Org Video Driver
[ 21.163] ABI class: X.Org Video Driver, version 13.1
[ 21.164] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
[ 21.164] Module class: X.Org Video Driver
[ 21.164] ABI class: X.Org Video Driver, version 13.1
[ 21.165] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 21.165] Module class: X.Org Video Driver
[ 21.165] ABI class: X.Org Video Driver, version 13.1
[ 21.166] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 21.166] Module class: X.Org Video Driver
[ 21.166] ABI class: X.Org Video Driver, version 13.1
[ 21.167] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 21.167] Module class: X.Org Video Driver
[ 21.167] ABI class: X.Org Video Driver, version 13.1
[ 21.167] (II) NOUVEAU driver
[ 21.167] (II) NOUVEAU driver for NVIDIA chipset families :
[ 21.168] (II) NOUVEAU driver
[ 21.169] (II) NOUVEAU driver for NVIDIA chipset families :
[ 21.170] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 21.170] (II) FBDEV: driver for framebuffer: fbdev
[ 21.170] (II) VESA: driver for VESA chipsets: vesa
[ 21.172] ABI class: X.Org Video Driver, version 13.1
[ 21.202] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[ 21.334] Module class: X.Org XInput Driver
[ 21.334] ABI class: X.Org XInput driver, version 18.0
[ 21.334] (II) Using input driver 'evdev' for 'Power Button'
[ 21.377] (II) Using input driver 'evdev' for 'Power Button'
[ 21.378] (II) Using input driver 'evdev' for 'USB OPTICAL MOUSE'
[ 21.379] (II) No input driver specified, ignoring this device.
[ 21.379] (II) Using input driver 'evdev' for 'BTC USB Multimedia Keyboard'
[ 21.381] (II) Using input driver 'evdev' for 'BTC USB Multimedia Keyboard'
[ 21.382] (II) Using input driver 'evdev' for 'A4 TECH USB2.0 PC Camera J'
[ 21.383] (II) No input driver specified, ignoring this device.
[ 21.384] (II) No input driver specified, ignoring this device.
[ 21.384] (II) No input driver specified, ignoring this device.
[ 21.384] (II) No input driver specified, ignoring this device.
[ 21.385] (II) No input driver specified, ignoring this device.
[ 21.385] (II) No input driver specified, ignoring this device.
[ 21.385] (II) No input driver specified, ignoring this device.
[ 21.386] (II) No input driver specified, ignoring this device.
[ 21.386] (II) No input driver specified, ignoring this device.
[ 21.386] (II) No input driver specified, ignoring this device.
[ 21.387] (II) No input driver specified, ignoring this device.
[ 21.387] (II) No input driver specified, ignoring this device.
[ 21.387] (II) No input driver specified, ignoring this device.
[ 21.388] (II) No input driver specified, ignoring this device.
Код: Выделить всё
dima@dark:~> glxinfo | grep render
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Error: couldn't find RGB GLX visual or fbconfig
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Код: Выделить всё
GRUB_CMDLINE_LINUX_DEFAULT=" resume=/dev/disk/by-id/ata-ST380011A_3JV4N1KK-part1 splash=silent quiet showopts nomodeset"
[
Код: Выделить всё
dark:/home/dima # cat /boot/grub2/grub.cfg
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub2-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="${saved_entry}"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' bf1cd683-5c44-4169-bc4a-78b5a9da0a2b
else
search --no-floppy --fs-uuid --set=root bf1cd683-5c44-4169-bc4a-78b5a9da0a2b
fi
font="/usr/share/grub2/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=ru_RU
insmod gettext
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' bf1cd683-5c44-4169-bc4a-78b5a9da0a2b
else
search --no-floppy --fs-uuid --set=root bf1cd683-5c44-4169-bc4a-78b5a9da0a2b
fi
insmod gfxmenu
loadfont ($root)/boot/grub2/themes/openSUSE/ascii.pf2
loadfont ($root)/boot/grub2/themes/openSUSE/DejaVuSans10.pf2
loadfont ($root)/boot/grub2/themes/openSUSE/DejaVuSans12.pf2
loadfont ($root)/boot/grub2/themes/openSUSE/DejaVuSans-Bold14.pf2
insmod png
set theme=($root)/boot/grub2/themes/openSUSE/theme.txt
export theme
if [ x${boot_once} = xtrue ]; then
set timeout=0
elif sleep --interruptible 0 ; then
set timeout=8
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'openSUSE 12.3' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-bf1cd683-5c44-4169-bc4a-78b5a9da0a2b' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' bf1cd683-5c44-4169-bc4a-78b5a9da0a2b
else
search --no-floppy --fs-uuid --set=root bf1cd683-5c44-4169-bc4a-78b5a9da0a2b
fi
echo 'Загружается Linux 3.9.8-15.gf3348a8-pae …'
linux /boot/vmlinuz-3.9.8-15.gf3348a8-pae root=UUID=bf1cd683-5c44-4169-bc4a-78b5a9da0a2b resume=/dev/disk/by-id/ata-ST380011A_3JV4N1KK-part1 splash=silent quiet showopts nomodeset
echo 'Загружается начальный виртуальный диск …'
initrd /boot/initrd-3.9.8-15.gf3348a8-pae
}
submenu 'Дополнительные параметры для openSUSE 12.3' $menuentry_id_option 'gnulinux-advanced-bf1cd683-5c44-4169-bc4a-78b5a9da0a2b' {
menuentry 'openSUSE 12.3, с Linux 3.9.8-15.gf3348a8-pae' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.9.8-15.gf3348a8-pae-advanced-bf1cd683-5c44-4169-bc4a-78b5a9da0a2b' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' bf1cd683-5c44-4169-bc4a-78b5a9da0a2b
else
search --no-floppy --fs-uuid --set=root bf1cd683-5c44-4169-bc4a-78b5a9da0a2b
fi
echo 'Загружается Linux 3.9.8-15.gf3348a8-pae …'
linux /boot/vmlinuz-3.9.8-15.gf3348a8-pae root=UUID=bf1cd683-5c44-4169-bc4a-78b5a9da0a2b resume=/dev/disk/by-id/ata-ST380011A_3JV4N1KK-part1 splash=silent quiet showopts nomodeset
echo 'Загружается начальный виртуальный диск …'
initrd /boot/initrd-3.9.8-15.gf3348a8-pae
}
menuentry 'openSUSE 12.3, с Linux 3.9.8-15.gf3348a8-pae (режим восстановления)' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.9.8-15.gf3348a8-pae-recovery-bf1cd683-5c44-4169-bc4a-78b5a9da0a2b' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' bf1cd683-5c44-4169-bc4a-78b5a9da0a2b
else
search --no-floppy --fs-uuid --set=root bf1cd683-5c44-4169-bc4a-78b5a9da0a2b
fi
echo 'Загружается Linux 3.9.8-15.gf3348a8-pae …'
linux /boot/vmlinuz-3.9.8-15.gf3348a8-pae root=UUID=bf1cd683-5c44-4169-bc4a-78b5a9da0a2b showopts apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe
echo 'Загружается начальный виртуальный диск …'
initrd /boot/initrd-3.9.8-15.gf3348a8-pae
}
menuentry 'openSUSE 12.3, с Linux 3.9.8-15.gf3348a8-desktop' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.9.8-15.gf3348a8-desktop-advanced-bf1cd683-5c44-4169-bc4a-78b5a9da0a2b' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' bf1cd683-5c44-4169-bc4a-78b5a9da0a2b
else
search --no-floppy --fs-uuid --set=root bf1cd683-5c44-4169-bc4a-78b5a9da0a2b
fi
echo 'Загружается Linux 3.9.8-15.gf3348a8-desktop …'
linux /boot/vmlinuz-3.9.8-15.gf3348a8-desktop root=UUID=bf1cd683-5c44-4169-bc4a-78b5a9da0a2b resume=/dev/disk/by-id/ata-ST380011A_3JV4N1KK-part1 splash=silent quiet showopts nomodeset
echo 'Загружается начальный виртуальный диск …'
initrd /boot/initrd-3.9.8-15.gf3348a8-desktop
}
menuentry 'openSUSE 12.3, с Linux 3.9.8-15.gf3348a8-desktop (режим восстановления)' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.9.8-15.gf3348a8-desktop-recovery-bf1cd683-5c44-4169-bc4a-78b5a9da0a2b' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' bf1cd683-5c44-4169-bc4a-78b5a9da0a2b
else
search --no-floppy --fs-uuid --set=root bf1cd683-5c44-4169-bc4a-78b5a9da0a2b
fi
echo 'Загружается Linux 3.9.8-15.gf3348a8-desktop …'
linux /boot/vmlinuz-3.9.8-15.gf3348a8-desktop root=UUID=bf1cd683-5c44-4169-bc4a-78b5a9da0a2b showopts apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe
echo 'Загружается начальный виртуальный диск …'
initrd /boot/initrd-3.9.8-15.gf3348a8-desktop
}
menuentry 'openSUSE 12.3, с Linux 3.9.8-15.gf3348a8-default' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.9.8-15.gf3348a8-default-advanced-bf1cd683-5c44-4169-bc4a-78b5a9da0a2b' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' bf1cd683-5c44-4169-bc4a-78b5a9da0a2b
else
search --no-floppy --fs-uuid --set=root bf1cd683-5c44-4169-bc4a-78b5a9da0a2b
fi
echo 'Загружается Linux 3.9.8-15.gf3348a8-default …'
linux /boot/vmlinuz-3.9.8-15.gf3348a8-default root=UUID=bf1cd683-5c44-4169-bc4a-78b5a9da0a2b resume=/dev/disk/by-id/ata-ST380011A_3JV4N1KK-part1 splash=silent quiet showopts nomodeset
echo 'Загружается начальный виртуальный диск …'
initrd /boot/initrd-3.9.8-15.gf3348a8-default
}
menuentry 'openSUSE 12.3, с Linux 3.9.8-15.gf3348a8-default (режим восстановления)' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.9.8-15.gf3348a8-default-recovery-bf1cd683-5c44-4169-bc4a-78b5a9da0a2b' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' bf1cd683-5c44-4169-bc4a-78b5a9da0a2b
else
search --no-floppy --fs-uuid --set=root bf1cd683-5c44-4169-bc4a-78b5a9da0a2b
fi
echo 'Загружается Linux 3.9.8-15.gf3348a8-default …'
linux /boot/vmlinuz-3.9.8-15.gf3348a8-default root=UUID=bf1cd683-5c44-4169-bc4a-78b5a9da0a2b showopts apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe
echo 'Загружается начальный виртуальный диск …'
initrd /boot/initrd-3.9.8-15.gf3348a8-default
}
menuentry 'openSUSE 12.3, с Linux 3.7.10-1.16-pae' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.7.10-1.16-pae-advanced-bf1cd683-5c44-4169-bc4a-78b5a9da0a2b' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' bf1cd683-5c44-4169-bc4a-78b5a9da0a2b
else
search --no-floppy --fs-uuid --set=root bf1cd683-5c44-4169-bc4a-78b5a9da0a2b
fi
echo 'Загружается Linux 3.7.10-1.16-pae …'
linux /boot/vmlinuz-3.7.10-1.16-pae root=UUID=bf1cd683-5c44-4169-bc4a-78b5a9da0a2b resume=/dev/disk/by-id/ata-ST380011A_3JV4N1KK-part1 splash=silent quiet showopts nomodeset
echo 'Загружается начальный виртуальный диск …'
initrd /boot/initrd-3.7.10-1.16-pae
}
menuentry 'openSUSE 12.3, с Linux 3.7.10-1.16-pae (режим восстановления)' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.7.10-1.16-pae-recovery-bf1cd683-5c44-4169-bc4a-78b5a9da0a2b' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' bf1cd683-5c44-4169-bc4a-78b5a9da0a2b
else
search --no-floppy --fs-uuid --set=root bf1cd683-5c44-4169-bc4a-78b5a9da0a2b
fi
echo 'Загружается Linux 3.7.10-1.16-pae …'
linux /boot/vmlinuz-3.7.10-1.16-pae root=UUID=bf1cd683-5c44-4169-bc4a-78b5a9da0a2b showopts apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe
echo 'Загружается начальный виртуальный диск …'
initrd /boot/initrd-3.7.10-1.16-pae
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/20_ppc_terminfo ###
### END /etc/grub.d/20_ppc_terminfo ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Ubuntu 13.04 (13.04) (на /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-1ee63e8f-73d6-476d-9754-f79179508248' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 --hint='hd1,msdos1' 1ee63e8f-73d6-476d-9754-f79179508248
else
search --no-floppy --fs-uuid --set=root 1ee63e8f-73d6-476d-9754-f79179508248
fi
linux /boot/vmlinuz-3.8.0-25-generic root=UUID=1ee63e8f-73d6-476d-9754-f79179508248 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.8.0-25-generic
}
submenu 'Дополнительные параметры для Ubuntu 13.04 (13.04) (на /dev/sdb1)' $menuentry_id_option 'osprober-gnulinux-advanced-1ee63e8f-73d6-476d-9754-f79179508248' {
menuentry 'Ubuntu (на /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.8.0-25-generic--1ee63e8f-73d6-476d-9754-f79179508248' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 --hint='hd1,msdos1' 1ee63e8f-73d6-476d-9754-f79179508248
else
search --no-floppy --fs-uuid --set=root 1ee63e8f-73d6-476d-9754-f79179508248
fi
linux /boot/vmlinuz-3.8.0-25-generic root=UUID=1ee63e8f-73d6-476d-9754-f79179508248 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.8.0-25-generic
}
menuentry 'Ubuntu, с Linux 3.8.0-25-generic (на /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.8.0-25-generic--1ee63e8f-73d6-476d-9754-f79179508248' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 --hint='hd1,msdos1' 1ee63e8f-73d6-476d-9754-f79179508248
else
search --no-floppy --fs-uuid --set=root 1ee63e8f-73d6-476d-9754-f79179508248
fi
linux /boot/vmlinuz-3.8.0-25-generic root=UUID=1ee63e8f-73d6-476d-9754-f79179508248 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.8.0-25-generic
}
menuentry 'Ubuntu, с Linux 3.8.0-25-generic (режим восстановления) (на /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.8.0-25-generic--1ee63e8f-73d6-476d-9754-f79179508248' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 --hint='hd1,msdos1' 1ee63e8f-73d6-476d-9754-f79179508248
else
search --no-floppy --fs-uuid --set=root 1ee63e8f-73d6-476d-9754-f79179508248
fi
linux /boot/vmlinuz-3.8.0-25-generic root=UUID=1ee63e8f-73d6-476d-9754-f79179508248 ro recovery nomodeset
initrd /boot/initrd.img-3.8.0-25-generic
}
menuentry 'Ubuntu, с Linux 3.8.0-14-generic (на /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.8.0-14-generic--1ee63e8f-73d6-476d-9754-f79179508248' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 --hint='hd1,msdos1' 1ee63e8f-73d6-476d-9754-f79179508248
else
search --no-floppy --fs-uuid --set=root 1ee63e8f-73d6-476d-9754-f79179508248
fi
linux /boot/vmlinuz-3.8.0-14-generic root=UUID=1ee63e8f-73d6-476d-9754-f79179508248 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.8.0-14-generic
}
menuentry 'Ubuntu, с Linux 3.8.0-14-generic (режим восстановления) (на /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.8.0-14-generic--1ee63e8f-73d6-476d-9754-f79179508248' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 --hint='hd1,msdos1' 1ee63e8f-73d6-476d-9754-f79179508248
else
search --no-floppy --fs-uuid --set=root 1ee63e8f-73d6-476d-9754-f79179508248
fi
linux /boot/vmlinuz-3.8.0-14-generic root=UUID=1ee63e8f-73d6-476d-9754-f79179508248 ro recovery nomodeset
initrd /boot/initrd.img-3.8.0-14-generic
}
}
menuentry 'Windows Vista (loader) (на /dev/sdc1)' --class windows --class os $menuentry_id_option 'osprober-chain-78CC3AF9CC3AB16C' {
insmod part_msdos
insmod ntfs
set root='hd2,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos1 --hint-efi=hd2,msdos1 --hint-baremetal=ahci2,msdos1 --hint='hd2,msdos1' 78CC3AF9CC3AB16C
else
search --no-floppy --fs-uuid --set=root 78CC3AF9CC3AB16C
fi
chainloader +1
}
menuentry 'Windows 7 (loader) (на /dev/sde1)' --class windows --class os $menuentry_id_option 'osprober-chain-8600669500668BCD' {
insmod part_msdos
insmod ntfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint='hd4,msdos1' 8600669500668BCD
else
search --no-floppy --fs-uuid --set=root 8600669500668BCD
fi
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/90_persistent ###
### END /etc/grub.d/90_persistent ###
[code]
opensuse 12.3 x86
nvidia 450
экран 800 на 600
как сделать нормальный что бы двайверы нвидии работали
и почему у меня столько ядер?)
спасибо.
Re: Черный экран Gnome
Использование вами PAE ядра чем-то обусловлено? (в подписи у вас написано 3Gb оперативки)
Проделайте следующее:
1) Удаление ненужных драйверов и ядер:
а) (при условии, что всё-таки пользуйтесь PAE ядром)
Код: Выделить всё
# zypper rm kernel-pae-base-3.7.10-1.16.1.i686 kernel-default-3.9.8-15.1.gf3348a8.i586 kernel-desktop-devel-3.9.8-15.1.gf3348a8.i686 kernel-desktop-3.9.8-15.1.gf3348a8.i686 kernel-default-devel-3.9.8-15.1.gf3348a8.i586 nvidia-computeG03-319.17-12.1.i586 x11-video-nvidiaG03-319.17-12.1.i586 nvidia-gfxG03-kmp-pae-319.17_k3.7.10_1.1-12.1.i586
б) (если будете использовать Desktop-ядро)
Код: Выделить всё
# zypper rm kernel-pae-devel-3.9.8-15.1.gf3348a8.i686 kernel-default-devel-3.9.8-15.1.gf3348a8.i586 kernel-pae-3.9.8-15.1.gf3348a8.i686 kernel-pae-base-3.7.10-1.16.1.i686 kernel-default-3.9.8-15.1.gf3348a8.i586 nvidia-computeG03-319.17-12.1.i586 x11-video-nvidiaG03-319.17-12.1.i586 nvidia-gfxG03-kmp-pae-319.17_k3.7.10_1.1-12.1.i586
2) Далее выполнить: (для автоматического удаления старых ядер, при обновлении на новое)
Код: Выделить всё
# systemctl --system daemon-reload && systemctl enable purge-kernels.service && systemctl start purge-kernels.service
В /etc/zypp/zypp.conf должна быть такая раскомментированная строка:
Код: Выделить всё
multiversion.kernels = latest,latest-1,running
3) Перезагрузитесь, Загрузитесь в нужное ядро в безопасный режим.
Выполнить все пункты совета №24 http://linuxforum.ru/viewtopic.php?id=26412
Последний не бета-драйвер ftp://download.nvidia.com/XFree86/Linux-x...-x86-319.32.run
Re: Черный экран Gnome
Re: Черный экран Gnome
если я все верно понимаю
то есть два варианта установки драйвера видео карты
первый через репозитарий плюс минус пару пакетов тащит (вроде как не сильно зависит от ядра)
и run пакет ставиться из консоли, но при обновлении ядра нужно пере собирать
верно я понимаю суть ?
Re: Черный экран Gnome
DarkXakep писал(а): ↑03.07.2013 22:55не верно сформулировал вопрос)
если я все верно понимаю
то есть два варианта установки драйвера видео карты
первый через репозитарий плюс минус пару пакетов тащит (вроде как не сильно зависит от ядра)
и run пакет ставиться из консоли, но при обновлении ядра нужно пере собирать
верно я понимаю суть ?
В репозитории нет драйверов под ядро 3.9.8.
В репозитории пакеты сильно зависят от ядра. А точнее скомпилированы под одно конкретное 3.7.10.
Поставленное с run нужно всегда переустанавливать при обновлении ядра или пакета: xorg-X11-server.
Будьте осторожны, вышло ядро 3.10, оно уже в репе /Kernel:/stable/standard/. Для него сейчас нет проприетарных драйверов NVIDIA (нужно искать патчи).
.
DarkXakep
Проще, пока не появятся новые подходящие драйвера, заблокировать для обновления ядро 3.9.8:
Код: Выделить всё
# zypper al kernel-desktop kernel-devel kernel-source kernel-desktop-devel
А потом разблокировать так:
Код: Выделить всё
# zypper rl kernel-desktop kernel-devel kernel-source kernel-desktop-devel
Re: Черный экран Gnome
Код: Выделить всё
darkxakep@dark:~> uname -a
Linux dark.suse 3.10.0-16.g3dcd746-desktop #1 SMP PREEMPT Mon Jul 1 13:38:11 UTC 2013 (3dcd746) i686 athlon i386 GNU/Linux
darkxakep@dark:~> glxinfo | grep render
direct rendering: Yes
OpenGL renderer string: GeForce GTS 450/PCIe/SSE2/3DNOW!
GL_NV_compute_program5, GL_NV_conditional_render,
GL_NV_parameter_buffer_object2, GL_NV_path_rendering,
GL_NVX_conditional_render, GL_NVX_gpu_memory_info,
darkxakep@dark:~> nvidia-settings -v
nvidia-settings: version 325.08 (buildmeister@swio-display-x64-rhel04-05) Wed Jun 26 18:31:51 PDT 2013
The NVIDIA X Server Settings tool.
This program is used to configure the NVIDIA Linux graphics driver.
For more detail, please see the nvidia-settings(1) man page.
Copyright (C) 2004 - 2010 NVIDIA Corporation.
обновил ядро до 3.10 и установил драйверы с патчем
взял от сюда патч https://devtalk.nvidia.com/default/topic/54...-on-linux-3-10/ и инструкцию)
1) распаковываем драйверы "NVIDIA-Linux-x86_64-325.08.run --extract-only"
2) копируем патч в каталог куда распаковали драйверы "nvidia-drivers-linux-3.10.patch.txt"
3) пропустил (тут предлагалось поменять пару строк в самом патче номер версии....
4) применяем патч командой "patch -p1 < nvidia-drivers-linux-3.10.patch!.txt"
5) ставим драйверы Nvidia 325.08 "nvidia-installer --no-x-check" (ставил с ключем так как был в X)
вдруг кому пригодиться)
Re: Черный экран Gnome
Код: Выделить всё
./NVIDIA-Linux-*.run --apply-patch /path/to/patch
Не проверял пока, однако.
Re: Черный экран Gnome
К пакету xorg-X11-server можно добавить и другие, которые при установке переписывают линки, созданные NVIDIA-Linux-*.run
Код:
~> LANG=en_US.UTF-8 ; rpm -qf `find /usr/lib* /lib* -name *319.23* | cut -d. -f1-2 | sed 's|.so|.so\*|'` | grep -v file
Mesa-libGL1-32bit-9.0.2-34.20.1.x86_64
Mesa-libGL1-32bit-9.0.2-34.20.1.x86_64
Mesa-libGL-devel-9.0.2-34.20.1.x86_64
Mesa-libGL1-9.0.2-34.20.1.x86_64
Mesa-libGL1-9.0.2-34.20.1.x86_64
xorg-x11-server-7.6_1.13.2-1.9.1.x86_64
libvdpau1-0.6-2.4.1.x86_64
*319.23* - версия драйвера
Будут проблемы с видео, то смотрим последние 100, 200 и т.д. строк /var/log/zypp/history
Код:
~> tail -100 /var/log/zypp/history | grep 'Mesa-libGL\|xorg-x11-server\|libvdpau1'