Приветствую всех!
Поставил Xubuntu 12.04 на нетбук iRu Intro 107 Atom. После установки единственное доступное разрешение 800х600. Видеокарта встроенная Intel GMA 3650, о которой много негативных отзывов в интернете.
После установки все обновил sudo apt-get upgrade, а тут еще сообщение, что мол доступны проприетарные драйвера на некоторое ваше оборудование, установить? Ну я согласился.
Установка. Под конец изображение изменилось на какую-то хрень неразборчивую. Мне надо было перейти в консоль Alt+F1 и попробовать убить иксы, но я перегрузился "по горячему".
Все, теперь до конца не загружается система: стартуют разные службы [ОК], и спотыкается после Checking battery state... [OK]. Так и висит.
Интересно, что в однопользовательском режиме (single) загружается все нормально, из под рута иксы стартуют (startx), загружается рабочий стол с нормальным разрешением экрана 1024х600. Из под юзера startx заканчивается зависанием. Переход в первую консоль дает постоянно повторяющийся "No protocol specified", система не на что не реагирует. Далее горячий перезагруз
Что делал: в /etc/rc.local перед exit0 ставил "su - user -c startx" - без изменений.
dpkg-reconfigure x11-common - выбирал "кто угодно" (ну может и зря, с точки зрения безопасности) - тоже без изменений.
Вот чувствую, что решение где-то рядом и простое, но пока не могу додуматься.
[Решено] Не загружается Xubuntu 12.04 LTS (проблема с видеокартой gma3650)
Модератор: Модераторы разделов
-
- Сообщения: 1144
- Статус: Slacker!
- ОС: Slackware64-current
Re: [Решено] Не загружается Xubuntu 12.04 LTS
А что в /var/log/Xorg.0.log, ~/.xsesson-errors?
Согласно данной странице, ваша видеокарта поддерживается проприетарным драйвером Catalyst Legacy 13.1 и свободным. Следовательно, вы должны либо использовать драйвер 13.1 с версиями иксов не выше 1.12 и ядра не выше 3.4, либо использовать свободный драйвер.
Согласно данной странице, ваша видеокарта поддерживается проприетарным драйвером Catalyst Legacy 13.1 и свободным. Следовательно, вы должны либо использовать драйвер 13.1 с версиями иксов не выше 1.12 и ядра не выше 3.4, либо использовать свободный драйвер.
-
- Сообщения: 29
- ОС: Xubuntu 12.04
Re: [Решено] Не загружается Xubuntu 12.04 LTS
Извините, может я чего-то недопонимаю, но на этой странице информация про поддержку AMD карт Radeon. И есть там карта Radeon 3650, но у меня GMA 3650, а она интеловская.
Посмотрел, ядро 3.2.0-48-generic, версия иксов 1.11.3.
Беглый просмотр /var/log/Xorg.0.log дает отсутствие error и небольшое количество warning. ~/.xsession-errors пока не смотрел.
На работу надо быстро собираться. Приду - детально посмотрю.
Вот есть темка http://forum.ubuntu.ru/index.php?topic=186601.0 по поводу, правда GMA3600
Читаю, может что и накопаю :-)
-
- Сообщения: 29
- ОС: Xubuntu 12.04
Re: [Решено] Не загружается Xubuntu 12.04 LTS
Думал - ничего не придумал лучше, как снести все и переставить систему, к тому же надо было по другому разделы нарезать. Понимаю, что это не Ъ и не Unix-way, но все же ....
Поставил, и на этот раз tar-ом сделал бэкап, ну так, на всякий случай :-).
На этот раз нашел в репах два пакета для карты gma3600, в прочем это то же, что и система предлагала в прошлый раз. Поставил - результат абсолютно такой-же - иксы сами не стартуют, под рутом запускаются с нормальным разрешением, но с какой-то корявенькой цветопередачей, да еще с некоторыми артефактами. Под юзером иксы не стартуют, выводя в первой консоли постоянно обновляющееся сообщение "No protocol specified". Печалька.
В общем, качаю исходники последнего ядра 3.9.6 - буду ставить, посмотрим что получится, может поможет.
Поставил, и на этот раз tar-ом сделал бэкап, ну так, на всякий случай :-).
На этот раз нашел в репах два пакета для карты gma3600, в прочем это то же, что и система предлагала в прошлый раз. Поставил - результат абсолютно такой-же - иксы сами не стартуют, под рутом запускаются с нормальным разрешением, но с какой-то корявенькой цветопередачей, да еще с некоторыми артефактами. Под юзером иксы не стартуют, выводя в первой консоли постоянно обновляющееся сообщение "No protocol specified". Печалька.
В общем, качаю исходники последнего ядра 3.9.6 - буду ставить, посмотрим что получится, может поможет.
-
- Модератор
- Сообщения: 20977
- Статус: nulla salus bello
- ОС: Debian GNU/Linux
Re: [Решено] Не загружается Xubuntu 12.04 LTS
Покажите всё-таки лог иксов.
Зачем из исходников-то? PPA же есть: https://launchpad.net/~canonical-kernel-team/+archive/ppa.
Зачем из исходников-то? PPA же есть: https://launchpad.net/~canonical-kernel-team/+archive/ppa.
Пишите правильно:
в консоли вку́пе (с чем-либо) в общем вообще | в течение (часа) новичок нюанс по умолчанию | приемлемо проблема пробовать трафик |
-
- Сообщения: 1144
- Статус: Slacker!
- ОС: Slackware64-current
-
- Сообщения: 29
- ОС: Xubuntu 12.04
Re: [Решено] Не загружается Xubuntu 12.04 LTS
Покажите всё-таки лог иксов.
Простите, упустил про логи :-(. Вот до дома доберусь с работы ....
А ядро из исходников - так это "из спортивного интереса", "человеку свойственно создавать себе трудности, а потом их героически преодолевать" (ага, как будто делать больше нечего :-)). Просто мало опыта, стыдно, да что ж говорить, почти нет опыта в сборке/пересборке ядра. Первый раз это у меня закончилось kernel panic.
-
- Сообщения: 29
- ОС: Xubuntu 12.04
Re: [Решено] Не загружается Xubuntu 12.04 LTS
Принимая во внимание наличие сделанного бекапа, смело решил воспроизвести проблему - установил снова из репозитория пакеты:"cedarview-graphics-drivers" и "libva-cedarview-vaapi-dri". Встали без ошибок и проблем.
После перезагрузки получил не поднимающиеся иксы, на пару секунд два раза проскакивала заставка с бегущей полосой на голубом фоне и все, зависает после "batarey, что-то там ....OK". Но позволяет перейти в первую консоль (! уже хорошо) и о чудо (!), спойно запустить от юзера иксы (! весьма неожиданно).
Разрешение 1024х600 как и должно быть, правда, как уже писал, очень плохая цветопередача, да еще с какими-то дефектами изображения.
И так, ближе к логам: лога ~/.xsesson-errors нет, хотя при предыдущих пробах был, лог иксов прикладываю:
Да, теперь нормально не наработает камера
,
программа cheese падает с ошибкой:
Одно греет - предварительно сделаный бекап :-)
В общем, попробую поставить новое ядро.
После перезагрузки получил не поднимающиеся иксы, на пару секунд два раза проскакивала заставка с бегущей полосой на голубом фоне и все, зависает после "batarey, что-то там ....OK". Но позволяет перейти в первую консоль (! уже хорошо) и о чудо (!), спойно запустить от юзера иксы (! весьма неожиданно).
Разрешение 1024х600 как и должно быть, правда, как уже писал, очень плохая цветопередача, да еще с какими-то дефектами изображения.
И так, ближе к логам: лога ~/.xsesson-errors нет, хотя при предыдущих пробах был, лог иксов прикладываю:
Spoiler
[ 43.847]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[ 43.847] X Protocol Version 11, Revision 0
[ 43.847] Build Operating System: Linux 2.6.42-37-generic i686 Ubuntu
[ 43.847] Current Operating System: Linux maxim 3.2.0-48-generic #74-Ubuntu SMP Thu Jun 6 19:45:16 UTC 2013 i686
[ 43.847] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-48-generic root=UUID=64cc3720-2d2f-4cd8-bf60-fdad7a675df8 ro quiet splash
[ 43.848] Build Date: 11 April 2013 01:04:30PM
[ 43.848] xorg-server 2:1.11.4-0ubuntu10.13 (For technical support please see http://www.ubuntu.com/support)
[ 43.848] Current version of pixman: 0.24.4
[ 43.848] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 43.848] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 43.849] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 21 21:50:12 2013
[ 43.850] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 43.851] (==) ServerLayout "default screen"
[ 43.851] (==) No screen section available. Using defaults.
[ 43.851] (**) |-->Screen "Default Screen Section" (0)
[ 43.851] (**) | |-->Monitor "<default monitor>"
[ 43.851] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 43.851] (**) | |-->Device "Card0"
[ 43.851] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 43.851] (**) Option "AIGLX" "Off"
[ 43.851] (==) Automatically adding devices
[ 43.851] (==) Automatically enabling devices
[ 43.852] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 43.852] Entry deleted from font path.
[ 43.852] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 43.852] Entry deleted from font path.
[ 43.852] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 43.852] Entry deleted from font path.
[ 43.852] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 43.852] Entry deleted from font path.
[ 43.852] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 43.852] Entry deleted from font path.
[ 43.852] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 43.852] Entry deleted from font path.
[ 43.852] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 43.852] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 43.852] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 43.852] (II) Loader magic: 0x43a5a0
[ 43.852] (II) Module ABI versions:
[ 43.852] X.Org ANSI C Emulation: 0.4
[ 43.852] X.Org Video Driver: 11.0
[ 43.852] X.Org XInput driver : 16.0
[ 43.852] X.Org Server Extension : 6.0
[ 43.853] (--) PCI:*(0:0:2:0) 8086:0be2:1991:5642 rev 11, Mem @ 0x80200000/1048576, I/O @ 0x000040c0/8
[ 43.854] (II) Open ACPI successful (/var/run/acpid.socket)
[ 43.854] (II) LoadModule: "extmod"
[ 43.855] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 43.855] (II) Module extmod: vendor="X.Org Foundation"
[ 43.855] compiled for 1.11.3, module version = 1.0.0
[ 43.855] Module class: X.Org Server Extension
[ 43.855] ABI class: X.Org Server Extension, version 6.0
[ 43.855] (II) Loading extension MIT-SCREEN-SAVER
[ 43.855] (II) Loading extension XFree86-VidModeExtension
[ 43.855] (II) Loading extension XFree86-DGA
[ 43.855] (II) Loading extension DPMS
[ 43.855] (II) Loading extension XVideo
[ 43.855] (II) Loading extension XVideo-MotionCompensation
[ 43.855] (II) Loading extension X-Resource
[ 43.855] (II) LoadModule: "dbe"
[ 43.856] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 43.856] (II) Module dbe: vendor="X.Org Foundation"
[ 43.856] compiled for 1.11.3, module version = 1.0.0
[ 43.856] Module class: X.Org Server Extension
[ 43.856] ABI class: X.Org Server Extension, version 6.0
[ 43.856] (II) Loading extension DOUBLE-BUFFER
[ 43.856] (II) LoadModule: "glx"
[ 43.856] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 43.857] (II) Module glx: vendor="X.Org Foundation"
[ 43.857] compiled for 1.11.3, module version = 1.0.0
[ 43.857] ABI class: X.Org Server Extension, version 6.0
[ 43.857] (**) AIGLX disabled
[ 43.857] (II) Loading extension GLX
[ 43.857] (II) LoadModule: "record"
[ 43.857] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 43.858] (II) Module record: vendor="X.Org Foundation"
[ 43.858] compiled for 1.11.3, module version = 1.13.0
[ 43.858] Module class: X.Org Server Extension
[ 43.858] ABI class: X.Org Server Extension, version 6.0
[ 43.858] (II) Loading extension RECORD
[ 43.858] (II) LoadModule: "dri"
[ 43.858] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 43.858] (II) Module dri: vendor="X.Org Foundation"
[ 43.858] compiled for 1.11.3, module version = 1.0.0
[ 43.859] ABI class: X.Org Server Extension, version 6.0
[ 43.859] (II) Loading extension XFree86-DRI
[ 43.859] (II) LoadModule: "dri2"
[ 43.859] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 43.859] (II) Module dri2: vendor="X.Org Foundation"
[ 43.859] compiled for 1.11.3, module version = 1.2.0
[ 43.859] ABI class: X.Org Server Extension, version 6.0
[ 43.859] (II) Loading extension DRI2
[ 43.859] (II) LoadModule: "pvr"
[ 43.860] (II) Loading /usr/lib/xorg/modules/drivers/pvr_drv.so
[ 43.861] (II) Module PVR: vendor="X.Org Foundation"
[ 43.861] compiled for 1.11.3, module version = 1.7.10922
[ 43.861] Module class: X.Org Video Driver
[ 43.861] ABI class: X.Org Video Driver, version 11.0
[ 43.861] (II) pvr: Driver for PowerVR chipsets: PowerVR SGX
[ 43.861] (--) using VT number 7
[ 43.868] drmOpenDevice: node name is /dev/dri/card0
[ 43.868] drmOpenDevice: open result is 8, (OK)
[ 43.869] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 43.869] drmOpenDevice: node name is /dev/dri/card0
[ 43.869] drmOpenDevice: open result is 8, (OK)
[ 43.869] drmOpenByBusid: drmOpenMinor returns 8
[ 43.869] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 43.869] drmOpenDevice: node name is /dev/dri/card0
[ 43.869] drmOpenDevice: open result is 8, (OK)
[ 43.869] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 43.869] drmOpenDevice: node name is /dev/dri/card0
[ 43.869] drmOpenDevice: open result is 8, (OK)
[ 43.870] drmOpenByBusid: drmOpenMinor returns 8
[ 43.870] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 43.870] (II) Loading /usr/lib/xorg/modules/drivers/pvr_drv.so
[ 43.870] drmOpenDevice: node name is /dev/dri/card0
[ 43.870] drmOpenDevice: open result is 9, (OK)
[ 43.870] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 43.870] drmOpenDevice: node name is /dev/dri/card0
[ 43.870] drmOpenDevice: open result is 9, (OK)
[ 43.870] drmOpenByBusid: drmOpenMinor returns 9
[ 43.870] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 43.870] drmOpenDevice: node name is /dev/dri/card0
[ 43.870] drmOpenDevice: open result is 10, (OK)
[ 43.870] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 43.871] drmOpenDevice: node name is /dev/dri/card0
[ 43.871] drmOpenDevice: open result is 10, (OK)
[ 43.871] drmOpenByBusid: drmOpenMinor returns 10
[ 43.871] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 43.871] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 43.873] drmOpenDevice: node name is /dev/dri/card0
[ 43.873] drmOpenDevice: open result is 11, (OK)
[ 43.873] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 43.873] drmOpenDevice: node name is /dev/dri/card0
[ 43.873] drmOpenDevice: open result is 11, (OK)
[ 43.873] drmOpenByBusid: drmOpenMinor returns 11
[ 43.874] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 43.874] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 43.874] drmOpenDevice: node name is /dev/dri/card0
[ 43.874] drmOpenDevice: open result is 11, (OK)
[ 43.874] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 43.874] drmOpenDevice: node name is /dev/dri/card0
[ 43.874] drmOpenDevice: open result is 11, (OK)
[ 43.874] drmOpenByBusid: drmOpenMinor returns 11
[ 43.874] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 43.874] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 43.988] drmOpenDevice: node name is /dev/dri/card0
[ 43.988] drmOpenDevice: open result is 11, (OK)
[ 43.988] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 43.988] drmOpenDevice: node name is /dev/dri/card0
[ 43.989] drmOpenDevice: open result is 11, (OK)
[ 43.989] drmOpenByBusid: drmOpenMinor returns 11
[ 43.989] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 43.989] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 44.107] (II) pvr(0): source head @cdv-v1.0.2
[ 44.107] (II) pvr(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 44.107] (==) pvr(0): Depth 24, (==) framebuffer bpp 32
[ 44.107] (==) pvr(0): RGB weight 888
[ 44.107] (==) pvr(0): Default visual is TrueColor
[ 44.107] (**) pvr(0): Option "FlipChain" "On"
[ 44.107] (**) pvr(0): Option "SoftEXA" "Off"
[ 44.107] (**) pvr(0): Option "DRIDisableVSync" "False"
[ 44.107] (II) pvr(0): Flipchain enabled
[ 44.140] (II) pvr(0): Output VGA1 has no monitor section
[ 44.162] (II) pvr(0): Output LVDS1 has no monitor section
[ 44.162] (II) pvr(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 44.207] (II) pvr(0): Output DVI1 has no monitor section
[ 44.208] (II) pvr(0): Output DP1 has no monitor section
[ 44.240] (II) pvr(0): EDID for output VGA1
[ 44.262] (II) pvr(0): EDID for output LVDS1
[ 44.263] (II) pvr(0): Not using default mode "320x240" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "400x300" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "400x300" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "512x384" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "640x480" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "640x512" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "800x600" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "576x432" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "680x384" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "680x384" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "700x525" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "720x450" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "800x512" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "840x525" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "840x525" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "960x540" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "960x600" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Printing probed modes for output LVDS1
[ 44.263] (II) pvr(0): Modeline "1024x600"x60.0 50.40 1024 1072 1104 1344 600 603 613 625 (37.5 kHz)
[ 44.263] (II) pvr(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 44.263] (II) pvr(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 44.263] (II) pvr(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 44.308] (II) pvr(0): EDID for output DVI1
[ 44.309] (II) pvr(0): EDID for output DP1
[ 44.309] (II) pvr(0): Output VGA1 disconnected
[ 44.309] (II) pvr(0): Output LVDS1 connected
[ 44.309] (II) pvr(0): Output DVI1 disconnected
[ 44.309] (II) pvr(0): Output DP1 disconnected
[ 44.309] (II) pvr(0): Using exact sizes for initial modes
[ 44.309] (II) pvr(0): Output LVDS1 using initial mode 1024x600
[ 44.309] (II) pvr(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 44.309] (--) pvr(0): Virtual size is 1024x600 (pitch 1024)
[ 44.309] (**) pvr(0): Mode "1024x600": 50.4 MHz (scaled from 0.0 MHz), 37.5 kHz, 60.0 Hz
[ 44.309] (II) pvr(0): Modeline "1024x600"x60.0 50.40 1024 1072 1104 1344 600 603 613 625 (37.5 kHz)
[ 44.309] (**) pvr(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 44.309] (II) pvr(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 44.309] (**) pvr(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 44.309] (II) pvr(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 44.309] (**) pvr(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 44.309] (II) pvr(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 44.309] (==) pvr(0): DPI set to (96, 96)
[ 44.309] (II) Loading sub module "fb"
[ 44.309] (II) LoadModule: "fb"
[ 44.310] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 44.310] (II) Module fb: vendor="X.Org Foundation"
[ 44.310] compiled for 1.11.3, module version = 1.0.0
[ 44.310] ABI class: X.Org ANSI C Emulation, version 0.4
[ 44.310] (II) pvr(0): [pvr] Software copy threshold : 0B
[ 44.310] (II) pvr(0): [pvr] Software solid threshold : 0B
[ 44.310] (II) pvr(0): [pvr] Software composite threshold : 0B
[ 44.310] (II) pvr(0): [pvr] Pixmap pool size: 0B
[ 44.310] (II) Loading sub module "exa"
[ 44.310] (II) LoadModule: "exa"
[ 44.311] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 44.311] (II) Module exa: vendor="X.Org Foundation"
[ 44.311] compiled for 1.11.3, module version = 2.5.0
[ 44.311] ABI class: X.Org Video Driver, version 11.0
[ 44.311] PVRPreInit: done
[ 44.311] (--) Depth 24 pixmap format is 32 bpp
[ 44.311] (II) pvr(0): [DRI2] Setup complete
[ 44.311] (II) pvr(0): [DRI2] DRI driver: pvr
[ 44.312] (II) EXA(0): Driver allocated offscreen pixmaps
[ 44.312] (II) EXA(0): Driver registered support for the following operations:
[ 44.312] (II) Solid
[ 44.312] (II) Copy
[ 44.312] (II) Composite (RENDER acceleration)
[ 44.326] (==) pvr(0): Backing store disabled
[ 44.326] (==) pvr(0): Silken mouse enabled
[ 44.326] (==) pvr(0): DPMS enabled
[ 44.326] (II) pvr(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 44.326] (II) pvr(0): max backlight 20
[ 44.326] (II) pvr(0): active backlight 16
[ 44.868] (==) pvr(0): Direct rendering enabled
[ 44.868] (II) pvr(0): Enable XVideo
[ 44.878] (II) pvr(0): [dri] Created flip chain 1
[ 44.878] (II) pvr(0): hotplug detection enabled
[ 44.878] (--) RandR disabled
[ 44.878] (II) Initializing built-in extension Generic Event Extension
[ 44.878] (II) Initializing built-in extension SHAPE
[ 44.879] (II) Initializing built-in extension MIT-SHM
[ 44.879] (II) Initializing built-in extension XInputExtension
[ 44.879] (II) Initializing built-in extension XTEST
[ 44.879] (II) Initializing built-in extension BIG-REQUESTS
[ 44.879] (II) Initializing built-in extension SYNC
[ 44.879] (II) Initializing built-in extension XKEYBOARD
[ 44.879] (II) Initializing built-in extension XC-MISC
[ 44.879] (II) Initializing built-in extension SECURITY
[ 44.879] (II) Initializing built-in extension XINERAMA
[ 44.879] (II) Initializing built-in extension XFIXES
[ 44.879] (II) Initializing built-in extension RENDER
[ 44.879] (II) Initializing built-in extension RANDR
[ 44.879] (II) Initializing built-in extension COMPOSITE
[ 44.879] (II) Initializing built-in extension DAMAGE
[ 44.933] (II) AIGLX: Loaded and initialized swrast
[ 44.934] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 44.934] (II) pvr(0): Setting screen physical size to 270 x 158
[ 44.958] (II) XKB: generating xkmfile /tmp/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 45.016] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 45.016] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 45.016] (II) LoadModule: "evdev"
[ 45.017] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45.017] (II) Module evdev: vendor="X.Org Foundation"
[ 45.017] compiled for 1.11.3, module version = 2.7.0
[ 45.017] Module class: X.Org XInput Driver
[ 45.017] ABI class: X.Org XInput driver, version 16.0
[ 45.017] (II) Using input driver 'evdev' for 'Power Button'
[ 45.017] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45.017] (**) Power Button: always reports core events
[ 45.017] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 45.018] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 45.018] (--) evdev: Power Button: Found keys
[ 45.018] (II) evdev: Power Button: Configuring as keyboard
[ 45.018] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 45.018] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 45.018] (**) Option "xkb_rules" "evdev"
[ 45.018] (**) Option "xkb_model" "pc105"
[ 45.018] (**) Option "xkb_layout" "us,ru"
[ 45.018] (**) Option "xkb_variant" ","
[ 45.018] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 45.024] (II) XKB: generating xkmfile /tmp/server-5BD46092C922CD443B4EABE4B26B5EFCDED629BD.xkm
[ 45.083] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 45.083] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 45.083] (II) Using input driver 'evdev' for 'Video Bus'
[ 45.083] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45.083] (**) Video Bus: always reports core events
[ 45.083] (**) evdev: Video Bus: Device: "/dev/input/event9"
[ 45.083] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 45.083] (--) evdev: Video Bus: Found keys
[ 45.083] (II) evdev: Video Bus: Configuring as keyboard
[ 45.083] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event9"
[ 45.083] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 45.083] (**) Option "xkb_rules" "evdev"
[ 45.084] (**) Option "xkb_model" "pc105"
[ 45.084] (**) Option "xkb_layout" "us,ru"
[ 45.084] (**) Option "xkb_variant" ","
[ 45.084] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 45.085] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 45.085] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 45.085] (II) Using input driver 'evdev' for 'Power Button'
[ 45.085] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45.085] (**) Power Button: always reports core events
[ 45.085] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 45.085] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 45.085] (--) evdev: Power Button: Found keys
[ 45.085] (II) evdev: Power Button: Configuring as keyboard
[ 45.086] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 45.086] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 45.086] (**) Option "xkb_rules" "evdev"
[ 45.086] (**) Option "xkb_model" "pc105"
[ 45.086] (**) Option "xkb_layout" "us,ru"
[ 45.086] (**) Option "xkb_variant" ","
[ 45.086] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 45.087] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 45.087] (II) No input driver specified, ignoring this device.
[ 45.087] (II) This device may have been added with another device file.
[ 45.088] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 45.088] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 45.088] (II) Using input driver 'evdev' for 'Sleep Button'
[ 45.088] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45.088] (**) Sleep Button: always reports core events
[ 45.088] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 45.088] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 45.088] (--) evdev: Sleep Button: Found keys
[ 45.088] (II) evdev: Sleep Button: Configuring as keyboard
[ 45.088] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 45.089] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 45.089] (**) Option "xkb_rules" "evdev"
[ 45.089] (**) Option "xkb_model" "pc105"
[ 45.089] (**) Option "xkb_layout" "us,ru"
[ 45.089] (**) Option "xkb_variant" ","
[ 45.089] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 45.090] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event11)
[ 45.090] (II) No input driver specified, ignoring this device.
[ 45.090] (II) This device may have been added with another device file.
[ 45.091] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event12)
[ 45.091] (II) No input driver specified, ignoring this device.
[ 45.091] (II) This device may have been added with another device file.
[ 45.091] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event13)
[ 45.092] (II) No input driver specified, ignoring this device.
[ 45.092] (II) This device may have been added with another device file.
[ 45.092] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event5)
[ 45.092] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 45.092] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 45.093] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45.093] (**) Logitech USB Receiver: always reports core events
[ 45.093] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event5"
[ 45.093] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 45.093] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 45.093] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 45.093] (--) evdev: Logitech USB Receiver: Found relative axes
[ 45.093] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 45.093] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 45.093] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 45.093] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 45.093] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 45.093] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input5/event5"
[ 45.093] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[ 45.093] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 45.094] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 45.094] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 45.094] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 45.094] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 45.094] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 45.095] (II) No input driver specified, ignoring this device.
[ 45.095] (II) This device may have been added with another device file.
[ 45.095] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event6)
[ 45.096] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 45.096] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 45.096] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45.096] (**) Logitech USB Receiver: always reports core events
[ 45.096] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event6"
[ 45.096] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 45.096] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 45.096] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 45.096] (--) evdev: Logitech USB Receiver: Found relative axes
[ 45.096] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 45.096] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 45.096] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 45.096] (--) evdev: Logitech USB Receiver: Found keys
[ 45.096] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 45.096] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 45.096] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 45.096] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 45.096] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 45.096] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input6/event6"
[ 45.096] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[ 45.096] (**) Option "xkb_rules" "evdev"
[ 45.096] (**) Option "xkb_model" "pc105"
[ 45.096] (**) Option "xkb_layout" "us,ru"
[ 45.097] (**) Option "xkb_variant" ","
[ 45.097] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 45.097] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 45.097] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 45.097] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 45.098] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 45.098] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 45.098] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 45.098] (II) config/udev: Adding input device USB 2.0 PC Cam (/dev/input/event8)
[ 45.099] (**) USB 2.0 PC Cam: Applying InputClass "evdev keyboard catchall"
[ 45.099] (II) Using input driver 'evdev' for 'USB 2.0 PC Cam'
[ 45.099] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45.099] (**) USB 2.0 PC Cam: always reports core events
[ 45.099] (**) evdev: USB 2.0 PC Cam: Device: "/dev/input/event8"
[ 45.099] (--) evdev: USB 2.0 PC Cam: Vendor 0x5149 Product 0x13d3
[ 45.099] (--) evdev: USB 2.0 PC Cam: Found keys
[ 45.099] (II) evdev: USB 2.0 PC Cam: Configuring as keyboard
[ 45.099] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input8/event8"
[ 45.099] (II) XINPUT: Adding extended input device "USB 2.0 PC Cam" (type: KEYBOARD, id 12)
[ 45.099] (**) Option "xkb_rules" "evdev"
[ 45.099] (**) Option "xkb_model" "pc105"
[ 45.099] (**) Option "xkb_layout" "us,ru"
[ 45.099] (**) Option "xkb_variant" ","
[ 45.099] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 45.101] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 45.101] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 45.101] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 45.101] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45.101] (**) AT Translated Set 2 keyboard: always reports core events
[ 45.101] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[ 45.101] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 45.101] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 45.101] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 45.101] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 45.101] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 45.101] (**) Option "xkb_rules" "evdev"
[ 45.101] (**) Option "xkb_model" "pc105"
[ 45.101] (**) Option "xkb_layout" "us,ru"
[ 45.101] (**) Option "xkb_variant" ","
[ 45.102] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 45.103] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event10)
[ 45.103] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 45.103] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[ 45.103] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45.103] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 45.103] (**) evdev: ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event10"
[ 45.103] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5
[ 45.103] (--) evdev: ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[ 45.103] (--) evdev: ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[ 45.103] (--) evdev: ImPS/2 Generic Wheel Mouse: Found relative axes
[ 45.103] (--) evdev: ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[ 45.103] (II) evdev: ImPS/2 Generic Wheel Mouse: Configuring as mouse
[ 45.103] (II) evdev: ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
[ 45.103] (**) evdev: ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 45.104] (**) evdev: ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 45.104] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[ 45.104] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 14)
[ 45.104] (II) evdev: ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[ 45.104] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[ 45.104] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 45.104] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 45.104] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 45.105] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse1)
[ 45.105] (II) No input driver specified, ignoring this device.
[ 45.105] (II) This device may have been added with another device file.
[ 45.110] (II) config/udev: Adding input device Topstar Laptop extra buttons (/dev/input/event7)
[ 45.110] (**) Topstar Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
[ 45.111] (II) Using input driver 'evdev' for 'Topstar Laptop extra buttons'
[ 45.111] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45.111] (**) Topstar Laptop extra buttons: always reports core events
[ 45.111] (**) evdev: Topstar Laptop extra buttons: Device: "/dev/input/event7"
[ 45.111] (--) evdev: Topstar Laptop extra buttons: Vendor 0 Product 0
[ 45.111] (--) evdev: Topstar Laptop extra buttons: Found keys
[ 45.111] (II) evdev: Topstar Laptop extra buttons: Configuring as keyboard
[ 45.111] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[ 45.111] (II) XINPUT: Adding extended input device "Topstar Laptop extra buttons" (type: KEYBOARD, id 15)
[ 45.111] (**) Option "xkb_rules" "evdev"
[ 45.111] (**) Option "xkb_model" "pc105"
[ 45.111] (**) Option "xkb_layout" "us,ru"
[ 45.111] (**) Option "xkb_variant" ","
[ 45.111] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 141.763] (II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/event14)
[ 141.763] (**) Logitech Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 141.763] (II) Using input driver 'evdev' for 'Logitech Logitech USB Keyboard'
[ 141.763] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 141.764] (**) Logitech Logitech USB Keyboard: always reports core events
[ 141.764] (**) evdev: Logitech Logitech USB Keyboard: Device: "/dev/input/event14"
[ 141.764] (--) evdev: Logitech Logitech USB Keyboard: Vendor 0x46d Product 0xc315
[ 141.764] (--) evdev: Logitech Logitech USB Keyboard: Found keys
[ 141.764] (II) evdev: Logitech Logitech USB Keyboard: Configuring as keyboard
[ 141.764] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input14/event14"
[ 141.764] (II) XINPUT: Adding extended input device "Logitech Logitech USB Keyboard" (type: KEYBOARD, id 16)
[ 141.764] (**) Option "xkb_rules" "evdev"
[ 141.764] (**) Option "xkb_model" "pc105"
[ 141.764] (**) Option "xkb_layout" "us,ru"
[ 141.764] (**) Option "xkb_variant" ","
[ 141.764] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
X.Org X Server 1.11.3
Release Date: 2011-12-16
[ 43.847] X Protocol Version 11, Revision 0
[ 43.847] Build Operating System: Linux 2.6.42-37-generic i686 Ubuntu
[ 43.847] Current Operating System: Linux maxim 3.2.0-48-generic #74-Ubuntu SMP Thu Jun 6 19:45:16 UTC 2013 i686
[ 43.847] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-48-generic root=UUID=64cc3720-2d2f-4cd8-bf60-fdad7a675df8 ro quiet splash
[ 43.848] Build Date: 11 April 2013 01:04:30PM
[ 43.848] xorg-server 2:1.11.4-0ubuntu10.13 (For technical support please see http://www.ubuntu.com/support)
[ 43.848] Current version of pixman: 0.24.4
[ 43.848] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 43.848] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 43.849] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 21 21:50:12 2013
[ 43.850] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 43.851] (==) ServerLayout "default screen"
[ 43.851] (==) No screen section available. Using defaults.
[ 43.851] (**) |-->Screen "Default Screen Section" (0)
[ 43.851] (**) | |-->Monitor "<default monitor>"
[ 43.851] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 43.851] (**) | |-->Device "Card0"
[ 43.851] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 43.851] (**) Option "AIGLX" "Off"
[ 43.851] (==) Automatically adding devices
[ 43.851] (==) Automatically enabling devices
[ 43.852] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 43.852] Entry deleted from font path.
[ 43.852] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 43.852] Entry deleted from font path.
[ 43.852] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 43.852] Entry deleted from font path.
[ 43.852] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 43.852] Entry deleted from font path.
[ 43.852] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 43.852] Entry deleted from font path.
[ 43.852] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 43.852] Entry deleted from font path.
[ 43.852] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 43.852] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 43.852] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 43.852] (II) Loader magic: 0x43a5a0
[ 43.852] (II) Module ABI versions:
[ 43.852] X.Org ANSI C Emulation: 0.4
[ 43.852] X.Org Video Driver: 11.0
[ 43.852] X.Org XInput driver : 16.0
[ 43.852] X.Org Server Extension : 6.0
[ 43.853] (--) PCI:*(0:0:2:0) 8086:0be2:1991:5642 rev 11, Mem @ 0x80200000/1048576, I/O @ 0x000040c0/8
[ 43.854] (II) Open ACPI successful (/var/run/acpid.socket)
[ 43.854] (II) LoadModule: "extmod"
[ 43.855] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 43.855] (II) Module extmod: vendor="X.Org Foundation"
[ 43.855] compiled for 1.11.3, module version = 1.0.0
[ 43.855] Module class: X.Org Server Extension
[ 43.855] ABI class: X.Org Server Extension, version 6.0
[ 43.855] (II) Loading extension MIT-SCREEN-SAVER
[ 43.855] (II) Loading extension XFree86-VidModeExtension
[ 43.855] (II) Loading extension XFree86-DGA
[ 43.855] (II) Loading extension DPMS
[ 43.855] (II) Loading extension XVideo
[ 43.855] (II) Loading extension XVideo-MotionCompensation
[ 43.855] (II) Loading extension X-Resource
[ 43.855] (II) LoadModule: "dbe"
[ 43.856] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 43.856] (II) Module dbe: vendor="X.Org Foundation"
[ 43.856] compiled for 1.11.3, module version = 1.0.0
[ 43.856] Module class: X.Org Server Extension
[ 43.856] ABI class: X.Org Server Extension, version 6.0
[ 43.856] (II) Loading extension DOUBLE-BUFFER
[ 43.856] (II) LoadModule: "glx"
[ 43.856] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 43.857] (II) Module glx: vendor="X.Org Foundation"
[ 43.857] compiled for 1.11.3, module version = 1.0.0
[ 43.857] ABI class: X.Org Server Extension, version 6.0
[ 43.857] (**) AIGLX disabled
[ 43.857] (II) Loading extension GLX
[ 43.857] (II) LoadModule: "record"
[ 43.857] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 43.858] (II) Module record: vendor="X.Org Foundation"
[ 43.858] compiled for 1.11.3, module version = 1.13.0
[ 43.858] Module class: X.Org Server Extension
[ 43.858] ABI class: X.Org Server Extension, version 6.0
[ 43.858] (II) Loading extension RECORD
[ 43.858] (II) LoadModule: "dri"
[ 43.858] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 43.858] (II) Module dri: vendor="X.Org Foundation"
[ 43.858] compiled for 1.11.3, module version = 1.0.0
[ 43.859] ABI class: X.Org Server Extension, version 6.0
[ 43.859] (II) Loading extension XFree86-DRI
[ 43.859] (II) LoadModule: "dri2"
[ 43.859] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 43.859] (II) Module dri2: vendor="X.Org Foundation"
[ 43.859] compiled for 1.11.3, module version = 1.2.0
[ 43.859] ABI class: X.Org Server Extension, version 6.0
[ 43.859] (II) Loading extension DRI2
[ 43.859] (II) LoadModule: "pvr"
[ 43.860] (II) Loading /usr/lib/xorg/modules/drivers/pvr_drv.so
[ 43.861] (II) Module PVR: vendor="X.Org Foundation"
[ 43.861] compiled for 1.11.3, module version = 1.7.10922
[ 43.861] Module class: X.Org Video Driver
[ 43.861] ABI class: X.Org Video Driver, version 11.0
[ 43.861] (II) pvr: Driver for PowerVR chipsets: PowerVR SGX
[ 43.861] (--) using VT number 7
[ 43.868] drmOpenDevice: node name is /dev/dri/card0
[ 43.868] drmOpenDevice: open result is 8, (OK)
[ 43.869] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 43.869] drmOpenDevice: node name is /dev/dri/card0
[ 43.869] drmOpenDevice: open result is 8, (OK)
[ 43.869] drmOpenByBusid: drmOpenMinor returns 8
[ 43.869] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 43.869] drmOpenDevice: node name is /dev/dri/card0
[ 43.869] drmOpenDevice: open result is 8, (OK)
[ 43.869] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 43.869] drmOpenDevice: node name is /dev/dri/card0
[ 43.869] drmOpenDevice: open result is 8, (OK)
[ 43.870] drmOpenByBusid: drmOpenMinor returns 8
[ 43.870] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 43.870] (II) Loading /usr/lib/xorg/modules/drivers/pvr_drv.so
[ 43.870] drmOpenDevice: node name is /dev/dri/card0
[ 43.870] drmOpenDevice: open result is 9, (OK)
[ 43.870] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 43.870] drmOpenDevice: node name is /dev/dri/card0
[ 43.870] drmOpenDevice: open result is 9, (OK)
[ 43.870] drmOpenByBusid: drmOpenMinor returns 9
[ 43.870] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 43.870] drmOpenDevice: node name is /dev/dri/card0
[ 43.870] drmOpenDevice: open result is 10, (OK)
[ 43.870] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 43.871] drmOpenDevice: node name is /dev/dri/card0
[ 43.871] drmOpenDevice: open result is 10, (OK)
[ 43.871] drmOpenByBusid: drmOpenMinor returns 10
[ 43.871] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 43.871] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 43.873] drmOpenDevice: node name is /dev/dri/card0
[ 43.873] drmOpenDevice: open result is 11, (OK)
[ 43.873] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 43.873] drmOpenDevice: node name is /dev/dri/card0
[ 43.873] drmOpenDevice: open result is 11, (OK)
[ 43.873] drmOpenByBusid: drmOpenMinor returns 11
[ 43.874] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 43.874] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 43.874] drmOpenDevice: node name is /dev/dri/card0
[ 43.874] drmOpenDevice: open result is 11, (OK)
[ 43.874] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 43.874] drmOpenDevice: node name is /dev/dri/card0
[ 43.874] drmOpenDevice: open result is 11, (OK)
[ 43.874] drmOpenByBusid: drmOpenMinor returns 11
[ 43.874] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 43.874] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 43.988] drmOpenDevice: node name is /dev/dri/card0
[ 43.988] drmOpenDevice: open result is 11, (OK)
[ 43.988] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 43.988] drmOpenDevice: node name is /dev/dri/card0
[ 43.989] drmOpenDevice: open result is 11, (OK)
[ 43.989] drmOpenByBusid: drmOpenMinor returns 11
[ 43.989] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 43.989] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 44.107] (II) pvr(0): source head @cdv-v1.0.2
[ 44.107] (II) pvr(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 44.107] (==) pvr(0): Depth 24, (==) framebuffer bpp 32
[ 44.107] (==) pvr(0): RGB weight 888
[ 44.107] (==) pvr(0): Default visual is TrueColor
[ 44.107] (**) pvr(0): Option "FlipChain" "On"
[ 44.107] (**) pvr(0): Option "SoftEXA" "Off"
[ 44.107] (**) pvr(0): Option "DRIDisableVSync" "False"
[ 44.107] (II) pvr(0): Flipchain enabled
[ 44.140] (II) pvr(0): Output VGA1 has no monitor section
[ 44.162] (II) pvr(0): Output LVDS1 has no monitor section
[ 44.162] (II) pvr(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 44.207] (II) pvr(0): Output DVI1 has no monitor section
[ 44.208] (II) pvr(0): Output DP1 has no monitor section
[ 44.240] (II) pvr(0): EDID for output VGA1
[ 44.262] (II) pvr(0): EDID for output LVDS1
[ 44.263] (II) pvr(0): Not using default mode "320x240" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "400x300" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "400x300" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "512x384" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "640x480" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "640x512" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "800x600" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "576x432" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "680x384" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "680x384" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "700x525" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "720x450" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "800x512" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "840x525" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "840x525" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "960x540" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Not using default mode "960x600" (doublescan mode not supported)
[ 44.263] (II) pvr(0): Printing probed modes for output LVDS1
[ 44.263] (II) pvr(0): Modeline "1024x600"x60.0 50.40 1024 1072 1104 1344 600 603 613 625 (37.5 kHz)
[ 44.263] (II) pvr(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 44.263] (II) pvr(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 44.263] (II) pvr(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 44.308] (II) pvr(0): EDID for output DVI1
[ 44.309] (II) pvr(0): EDID for output DP1
[ 44.309] (II) pvr(0): Output VGA1 disconnected
[ 44.309] (II) pvr(0): Output LVDS1 connected
[ 44.309] (II) pvr(0): Output DVI1 disconnected
[ 44.309] (II) pvr(0): Output DP1 disconnected
[ 44.309] (II) pvr(0): Using exact sizes for initial modes
[ 44.309] (II) pvr(0): Output LVDS1 using initial mode 1024x600
[ 44.309] (II) pvr(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 44.309] (--) pvr(0): Virtual size is 1024x600 (pitch 1024)
[ 44.309] (**) pvr(0): Mode "1024x600": 50.4 MHz (scaled from 0.0 MHz), 37.5 kHz, 60.0 Hz
[ 44.309] (II) pvr(0): Modeline "1024x600"x60.0 50.40 1024 1072 1104 1344 600 603 613 625 (37.5 kHz)
[ 44.309] (**) pvr(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 44.309] (II) pvr(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 44.309] (**) pvr(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 44.309] (II) pvr(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 44.309] (**) pvr(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 44.309] (II) pvr(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 44.309] (==) pvr(0): DPI set to (96, 96)
[ 44.309] (II) Loading sub module "fb"
[ 44.309] (II) LoadModule: "fb"
[ 44.310] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 44.310] (II) Module fb: vendor="X.Org Foundation"
[ 44.310] compiled for 1.11.3, module version = 1.0.0
[ 44.310] ABI class: X.Org ANSI C Emulation, version 0.4
[ 44.310] (II) pvr(0): [pvr] Software copy threshold : 0B
[ 44.310] (II) pvr(0): [pvr] Software solid threshold : 0B
[ 44.310] (II) pvr(0): [pvr] Software composite threshold : 0B
[ 44.310] (II) pvr(0): [pvr] Pixmap pool size: 0B
[ 44.310] (II) Loading sub module "exa"
[ 44.310] (II) LoadModule: "exa"
[ 44.311] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 44.311] (II) Module exa: vendor="X.Org Foundation"
[ 44.311] compiled for 1.11.3, module version = 2.5.0
[ 44.311] ABI class: X.Org Video Driver, version 11.0
[ 44.311] PVRPreInit: done
[ 44.311] (--) Depth 24 pixmap format is 32 bpp
[ 44.311] (II) pvr(0): [DRI2] Setup complete
[ 44.311] (II) pvr(0): [DRI2] DRI driver: pvr
[ 44.312] (II) EXA(0): Driver allocated offscreen pixmaps
[ 44.312] (II) EXA(0): Driver registered support for the following operations:
[ 44.312] (II) Solid
[ 44.312] (II) Copy
[ 44.312] (II) Composite (RENDER acceleration)
[ 44.326] (==) pvr(0): Backing store disabled
[ 44.326] (==) pvr(0): Silken mouse enabled
[ 44.326] (==) pvr(0): DPMS enabled
[ 44.326] (II) pvr(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 44.326] (II) pvr(0): max backlight 20
[ 44.326] (II) pvr(0): active backlight 16
[ 44.868] (==) pvr(0): Direct rendering enabled
[ 44.868] (II) pvr(0): Enable XVideo
[ 44.878] (II) pvr(0): [dri] Created flip chain 1
[ 44.878] (II) pvr(0): hotplug detection enabled
[ 44.878] (--) RandR disabled
[ 44.878] (II) Initializing built-in extension Generic Event Extension
[ 44.878] (II) Initializing built-in extension SHAPE
[ 44.879] (II) Initializing built-in extension MIT-SHM
[ 44.879] (II) Initializing built-in extension XInputExtension
[ 44.879] (II) Initializing built-in extension XTEST
[ 44.879] (II) Initializing built-in extension BIG-REQUESTS
[ 44.879] (II) Initializing built-in extension SYNC
[ 44.879] (II) Initializing built-in extension XKEYBOARD
[ 44.879] (II) Initializing built-in extension XC-MISC
[ 44.879] (II) Initializing built-in extension SECURITY
[ 44.879] (II) Initializing built-in extension XINERAMA
[ 44.879] (II) Initializing built-in extension XFIXES
[ 44.879] (II) Initializing built-in extension RENDER
[ 44.879] (II) Initializing built-in extension RANDR
[ 44.879] (II) Initializing built-in extension COMPOSITE
[ 44.879] (II) Initializing built-in extension DAMAGE
[ 44.933] (II) AIGLX: Loaded and initialized swrast
[ 44.934] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 44.934] (II) pvr(0): Setting screen physical size to 270 x 158
[ 44.958] (II) XKB: generating xkmfile /tmp/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 45.016] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 45.016] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 45.016] (II) LoadModule: "evdev"
[ 45.017] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45.017] (II) Module evdev: vendor="X.Org Foundation"
[ 45.017] compiled for 1.11.3, module version = 2.7.0
[ 45.017] Module class: X.Org XInput Driver
[ 45.017] ABI class: X.Org XInput driver, version 16.0
[ 45.017] (II) Using input driver 'evdev' for 'Power Button'
[ 45.017] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45.017] (**) Power Button: always reports core events
[ 45.017] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 45.018] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 45.018] (--) evdev: Power Button: Found keys
[ 45.018] (II) evdev: Power Button: Configuring as keyboard
[ 45.018] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 45.018] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 45.018] (**) Option "xkb_rules" "evdev"
[ 45.018] (**) Option "xkb_model" "pc105"
[ 45.018] (**) Option "xkb_layout" "us,ru"
[ 45.018] (**) Option "xkb_variant" ","
[ 45.018] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 45.024] (II) XKB: generating xkmfile /tmp/server-5BD46092C922CD443B4EABE4B26B5EFCDED629BD.xkm
[ 45.083] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 45.083] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 45.083] (II) Using input driver 'evdev' for 'Video Bus'
[ 45.083] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45.083] (**) Video Bus: always reports core events
[ 45.083] (**) evdev: Video Bus: Device: "/dev/input/event9"
[ 45.083] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 45.083] (--) evdev: Video Bus: Found keys
[ 45.083] (II) evdev: Video Bus: Configuring as keyboard
[ 45.083] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event9"
[ 45.083] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 45.083] (**) Option "xkb_rules" "evdev"
[ 45.084] (**) Option "xkb_model" "pc105"
[ 45.084] (**) Option "xkb_layout" "us,ru"
[ 45.084] (**) Option "xkb_variant" ","
[ 45.084] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 45.085] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 45.085] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 45.085] (II) Using input driver 'evdev' for 'Power Button'
[ 45.085] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45.085] (**) Power Button: always reports core events
[ 45.085] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 45.085] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 45.085] (--) evdev: Power Button: Found keys
[ 45.085] (II) evdev: Power Button: Configuring as keyboard
[ 45.086] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 45.086] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 45.086] (**) Option "xkb_rules" "evdev"
[ 45.086] (**) Option "xkb_model" "pc105"
[ 45.086] (**) Option "xkb_layout" "us,ru"
[ 45.086] (**) Option "xkb_variant" ","
[ 45.086] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 45.087] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 45.087] (II) No input driver specified, ignoring this device.
[ 45.087] (II) This device may have been added with another device file.
[ 45.088] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 45.088] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 45.088] (II) Using input driver 'evdev' for 'Sleep Button'
[ 45.088] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45.088] (**) Sleep Button: always reports core events
[ 45.088] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 45.088] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 45.088] (--) evdev: Sleep Button: Found keys
[ 45.088] (II) evdev: Sleep Button: Configuring as keyboard
[ 45.088] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 45.089] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 45.089] (**) Option "xkb_rules" "evdev"
[ 45.089] (**) Option "xkb_model" "pc105"
[ 45.089] (**) Option "xkb_layout" "us,ru"
[ 45.089] (**) Option "xkb_variant" ","
[ 45.089] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 45.090] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event11)
[ 45.090] (II) No input driver specified, ignoring this device.
[ 45.090] (II) This device may have been added with another device file.
[ 45.091] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event12)
[ 45.091] (II) No input driver specified, ignoring this device.
[ 45.091] (II) This device may have been added with another device file.
[ 45.091] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event13)
[ 45.092] (II) No input driver specified, ignoring this device.
[ 45.092] (II) This device may have been added with another device file.
[ 45.092] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event5)
[ 45.092] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 45.092] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 45.093] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45.093] (**) Logitech USB Receiver: always reports core events
[ 45.093] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event5"
[ 45.093] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 45.093] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 45.093] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 45.093] (--) evdev: Logitech USB Receiver: Found relative axes
[ 45.093] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 45.093] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 45.093] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 45.093] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 45.093] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 45.093] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input5/event5"
[ 45.093] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[ 45.093] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 45.094] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 45.094] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 45.094] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 45.094] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 45.094] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 45.095] (II) No input driver specified, ignoring this device.
[ 45.095] (II) This device may have been added with another device file.
[ 45.095] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event6)
[ 45.096] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 45.096] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 45.096] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45.096] (**) Logitech USB Receiver: always reports core events
[ 45.096] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event6"
[ 45.096] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 45.096] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 45.096] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 45.096] (--) evdev: Logitech USB Receiver: Found relative axes
[ 45.096] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 45.096] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 45.096] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 45.096] (--) evdev: Logitech USB Receiver: Found keys
[ 45.096] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 45.096] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 45.096] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 45.096] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 45.096] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 45.096] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input6/event6"
[ 45.096] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[ 45.096] (**) Option "xkb_rules" "evdev"
[ 45.096] (**) Option "xkb_model" "pc105"
[ 45.096] (**) Option "xkb_layout" "us,ru"
[ 45.097] (**) Option "xkb_variant" ","
[ 45.097] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 45.097] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 45.097] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 45.097] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 45.098] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 45.098] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 45.098] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 45.098] (II) config/udev: Adding input device USB 2.0 PC Cam (/dev/input/event8)
[ 45.099] (**) USB 2.0 PC Cam: Applying InputClass "evdev keyboard catchall"
[ 45.099] (II) Using input driver 'evdev' for 'USB 2.0 PC Cam'
[ 45.099] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45.099] (**) USB 2.0 PC Cam: always reports core events
[ 45.099] (**) evdev: USB 2.0 PC Cam: Device: "/dev/input/event8"
[ 45.099] (--) evdev: USB 2.0 PC Cam: Vendor 0x5149 Product 0x13d3
[ 45.099] (--) evdev: USB 2.0 PC Cam: Found keys
[ 45.099] (II) evdev: USB 2.0 PC Cam: Configuring as keyboard
[ 45.099] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input8/event8"
[ 45.099] (II) XINPUT: Adding extended input device "USB 2.0 PC Cam" (type: KEYBOARD, id 12)
[ 45.099] (**) Option "xkb_rules" "evdev"
[ 45.099] (**) Option "xkb_model" "pc105"
[ 45.099] (**) Option "xkb_layout" "us,ru"
[ 45.099] (**) Option "xkb_variant" ","
[ 45.099] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 45.101] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 45.101] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 45.101] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 45.101] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45.101] (**) AT Translated Set 2 keyboard: always reports core events
[ 45.101] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[ 45.101] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 45.101] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 45.101] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 45.101] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 45.101] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 45.101] (**) Option "xkb_rules" "evdev"
[ 45.101] (**) Option "xkb_model" "pc105"
[ 45.101] (**) Option "xkb_layout" "us,ru"
[ 45.101] (**) Option "xkb_variant" ","
[ 45.102] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 45.103] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event10)
[ 45.103] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 45.103] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[ 45.103] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45.103] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 45.103] (**) evdev: ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event10"
[ 45.103] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5
[ 45.103] (--) evdev: ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[ 45.103] (--) evdev: ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[ 45.103] (--) evdev: ImPS/2 Generic Wheel Mouse: Found relative axes
[ 45.103] (--) evdev: ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[ 45.103] (II) evdev: ImPS/2 Generic Wheel Mouse: Configuring as mouse
[ 45.103] (II) evdev: ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
[ 45.103] (**) evdev: ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 45.104] (**) evdev: ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 45.104] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[ 45.104] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 14)
[ 45.104] (II) evdev: ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[ 45.104] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[ 45.104] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 45.104] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 45.104] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 45.105] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse1)
[ 45.105] (II) No input driver specified, ignoring this device.
[ 45.105] (II) This device may have been added with another device file.
[ 45.110] (II) config/udev: Adding input device Topstar Laptop extra buttons (/dev/input/event7)
[ 45.110] (**) Topstar Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
[ 45.111] (II) Using input driver 'evdev' for 'Topstar Laptop extra buttons'
[ 45.111] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45.111] (**) Topstar Laptop extra buttons: always reports core events
[ 45.111] (**) evdev: Topstar Laptop extra buttons: Device: "/dev/input/event7"
[ 45.111] (--) evdev: Topstar Laptop extra buttons: Vendor 0 Product 0
[ 45.111] (--) evdev: Topstar Laptop extra buttons: Found keys
[ 45.111] (II) evdev: Topstar Laptop extra buttons: Configuring as keyboard
[ 45.111] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[ 45.111] (II) XINPUT: Adding extended input device "Topstar Laptop extra buttons" (type: KEYBOARD, id 15)
[ 45.111] (**) Option "xkb_rules" "evdev"
[ 45.111] (**) Option "xkb_model" "pc105"
[ 45.111] (**) Option "xkb_layout" "us,ru"
[ 45.111] (**) Option "xkb_variant" ","
[ 45.111] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 141.763] (II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/event14)
[ 141.763] (**) Logitech Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 141.763] (II) Using input driver 'evdev' for 'Logitech Logitech USB Keyboard'
[ 141.763] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 141.764] (**) Logitech Logitech USB Keyboard: always reports core events
[ 141.764] (**) evdev: Logitech Logitech USB Keyboard: Device: "/dev/input/event14"
[ 141.764] (--) evdev: Logitech Logitech USB Keyboard: Vendor 0x46d Product 0xc315
[ 141.764] (--) evdev: Logitech Logitech USB Keyboard: Found keys
[ 141.764] (II) evdev: Logitech Logitech USB Keyboard: Configuring as keyboard
[ 141.764] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input14/event14"
[ 141.764] (II) XINPUT: Adding extended input device "Logitech Logitech USB Keyboard" (type: KEYBOARD, id 16)
[ 141.764] (**) Option "xkb_rules" "evdev"
[ 141.764] (**) Option "xkb_model" "pc105"
[ 141.764] (**) Option "xkb_layout" "us,ru"
[ 141.764] (**) Option "xkb_variant" ","
[ 141.764] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
Да, теперь нормально не наработает камера
Код: Выделить всё
[ 20.715775] uvcvideo: Found UVC 1.00 device USB 2.0 PC Cam (5149:13d3)
[ 20.719230] input: USB 2.0 PC Cam as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input8
программа cheese падает с ошибкой:
Spoiler
maxim@maxim:~$ cheese
(cheese:3020): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkToggleButton, but as a GtkBin subclass a GtkToggleButton can only contain one widget at a time; it already contains a widget of type GtkLabel
(cheese:3020): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkToggleButton, but as a GtkBin subclass a GtkToggleButton can only contain one widget at a time; it already contains a widget of type GtkLabel
(cheese:3020): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkToggleButton, but as a GtkBin subclass a GtkToggleButton can only contain one widget at a time; it already contains a widget of type GtkLabel
(cheese:3020): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkButton, but as a GtkBin subclass a GtkButton can only contain one widget at a time; it already contains a widget of type GtkLabel
(cheese:3020): Gtk-WARNING **: Attempting to add a widget with type GtkGrid to a GtkToggleButton, but as a GtkBin subclass a GtkToggleButton can only contain one widget at a time; it already contains a widget of type GtkLabel
(cheese:3020): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkButton, but as a GtkBin subclass a GtkButton can only contain one widget at a time; it already contains a widget of type GtkLabel
** (cheese:3020): CRITICAL **: cheese_camera_device_get_uuid: assertion `CHEESE_IS_CAMERA_DEVICE (device)' failed
Ошибка сегментирования (сделан дамп памяти)
(cheese:3020): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkToggleButton, but as a GtkBin subclass a GtkToggleButton can only contain one widget at a time; it already contains a widget of type GtkLabel
(cheese:3020): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkToggleButton, but as a GtkBin subclass a GtkToggleButton can only contain one widget at a time; it already contains a widget of type GtkLabel
(cheese:3020): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkToggleButton, but as a GtkBin subclass a GtkToggleButton can only contain one widget at a time; it already contains a widget of type GtkLabel
(cheese:3020): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkButton, but as a GtkBin subclass a GtkButton can only contain one widget at a time; it already contains a widget of type GtkLabel
(cheese:3020): Gtk-WARNING **: Attempting to add a widget with type GtkGrid to a GtkToggleButton, but as a GtkBin subclass a GtkToggleButton can only contain one widget at a time; it already contains a widget of type GtkLabel
(cheese:3020): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkButton, but as a GtkBin subclass a GtkButton can only contain one widget at a time; it already contains a widget of type GtkLabel
** (cheese:3020): CRITICAL **: cheese_camera_device_get_uuid: assertion `CHEESE_IS_CAMERA_DEVICE (device)' failed
Ошибка сегментирования (сделан дамп памяти)
Одно греет - предварительно сделаный бекап :-)
В общем, попробую поставить новое ядро.
-
- Модератор
- Сообщения: 20977
- Статус: nulla salus bello
- ОС: Debian GNU/Linux
Re: [Решено] Не загружается Xubuntu 12.04 LTS
А, cedar... Тяжёлый случай.
Пишите правильно:
в консоли вку́пе (с чем-либо) в общем вообще | в течение (часа) новичок нюанс по умолчанию | приемлемо проблема пробовать трафик |
-
- Сообщения: 29
- ОС: Xubuntu 12.04
Re: [Решено] Не загружается Xubuntu 12.04 LTS
Не стал я ставить новое ядро, поставил Xubuntu 13.04 - итог: все работает как говорится "из каробки" :-). Есть, конечно мелкие огрехи - не подключается в сети wifi, хотя сеть видит; не подключается заведомо рабочий 3g-модем huawei 352 и пока не знаю, работает или нет HDMI, но это все решаемо, с этим справимся. А так доволен :-)