Xorg.0.log
Код: Выделить всё
cat /var/log/Xorg.0.log
[ 24140.237]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 24140.237]
X.Org X Server 1.14.99.903 (1.15.0 RC 3)
Release Date: 2013-11-23
[ 24140.238] X Protocol Version 11, Revision 0
[ 24140.239] Build Operating System: Linux 3.12.4-gentoo x86_64 Gentoo
[ 24140.239] Current Operating System: Linux xsi 3.12.4-gentoo #1 SMP PREEMPT Mon Dec 9 07:19:27 EET 2013 x86_64
[ 24140.239] Kernel command line: root=/dev/sda2
[ 24140.240] Build Date: 09 December 2013 08:02:12AM
[ 24140.241]
[ 24140.241] Current version of pixman: 0.32.4
[ 24140.242] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 24140.242] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 24140.244] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 26 22:14:27 2013
[ 24140.244] (==) Using config file: "/etc/X11/xorg.conf"
[ 24140.245] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 24140.246] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 24140.246] (==) ServerLayout "X.org Configured"
[ 24140.246] (**) |-->Screen "Screen0" (0)
[ 24140.246] (**) | |-->Monitor "Monitor0"
[ 24140.246] (**) | |-->Device "Card0"
[ 24140.246] (**) |-->Input Device "Mouse0"
[ 24140.246] (**) |-->Input Device "Keyboard0"
[ 24140.246] (**) Option "DontZap" "false"
[ 24140.246] (==) Automatically adding devices
[ 24140.246] (==) Automatically enabling devices
[ 24140.246] (==) Automatically adding GPU devices
[ 24140.246] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 24140.246] (**) ModulePath set to "/usr/lib64/xorg/modules"
[ 24140.246] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 24140.246] (WW) Disabling Mouse0
[ 24140.246] (WW) Disabling Keyboard0
[ 24140.246] (II) Loader magic: 0x80fc60
[ 24140.246] (II) Module ABI versions:
[ 24140.246] X.Org ANSI C Emulation: 0.4
[ 24140.246] X.Org Video Driver: 15.0
[ 24140.246] X.Org XInput driver : 20.0
[ 24140.246] X.Org Server Extension : 8.0
[ 24140.246] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 24140.247] (--) PCI:*(0:2:0:0) 10de:10c3:0000:0000 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xce000000/33554432, I/O @ 0x0000b800/128, BIOS @ 0x????????/524288
[ 24140.247] Initializing built-in extension Generic Event Extension
[ 24140.248] Initializing built-in extension SHAPE
[ 24140.248] Initializing built-in extension MIT-SHM
[ 24140.249] Initializing built-in extension XInputExtension
[ 24140.249] Initializing built-in extension XTEST
[ 24140.250] Initializing built-in extension BIG-REQUESTS
[ 24140.250] Initializing built-in extension SYNC
[ 24140.251] Initializing built-in extension XKEYBOARD
[ 24140.251] Initializing built-in extension XC-MISC
[ 24140.252] Initializing built-in extension XINERAMA
[ 24140.253] Initializing built-in extension XFIXES
[ 24140.253] Initializing built-in extension RENDER
[ 24140.254] Initializing built-in extension RANDR
[ 24140.254] Initializing built-in extension COMPOSITE
[ 24140.255] Initializing built-in extension DAMAGE
[ 24140.255] Initializing built-in extension MIT-SCREEN-SAVER
[ 24140.256] Initializing built-in extension DOUBLE-BUFFER
[ 24140.256] Initializing built-in extension RECORD
[ 24140.257] Initializing built-in extension DPMS
[ 24140.257] Initializing built-in extension Present
[ 24140.258] Initializing built-in extension DRI3
[ 24140.258] Initializing built-in extension X-Resource
[ 24140.259] Initializing built-in extension XVideo
[ 24140.259] Initializing built-in extension XVideo-MotionCompensation
[ 24140.260] Initializing built-in extension XFree86-VidModeExtension
[ 24140.260] Initializing built-in extension XFree86-DGA
[ 24140.260] Initializing built-in extension XFree86-DRI
[ 24140.261] Initializing built-in extension DRI2
[ 24140.261] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 24140.261] (II) LoadModule: "extmod"
[ 24140.261] (II) Module "extmod" already built-in
[ 24140.261] (II) LoadModule: "record"
[ 24140.261] (II) Module "record" already built-in
[ 24140.261] (II) LoadModule: "dbe"
[ 24140.261] (II) Module "dbe" already built-in
[ 24140.261] (II) LoadModule: "dri"
[ 24140.261] (II) Module "dri" already built-in
[ 24140.261] (II) LoadModule: "dri2"
[ 24140.261] (II) Module "dri2" already built-in
[ 24140.261] (II) LoadModule: "glx"
[ 24140.261] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 24140.262] (II) Module glx: vendor="X.Org Foundation"
[ 24140.262] compiled for 1.14.99.903, module version = 1.0.0
[ 24140.262] ABI class: X.Org Server Extension, version 8.0
[ 24140.262] (==) AIGLX enabled
[ 24140.262] Loading extension GLX
[ 24140.262] (II) LoadModule: "nouveau"
[ 24140.262] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[ 24140.262] (II) Module nouveau: vendor="X.Org Foundation"
[ 24140.262] compiled for 1.14.99.903, module version = 1.0.10
[ 24140.262] Module class: X.Org Video Driver
[ 24140.262] ABI class: X.Org Video Driver, version 15.0
[ 24140.262] (II) NOUVEAU driver
[ 24140.262] (II) NOUVEAU driver for NVIDIA chipset families :
[ 24140.262] RIVA TNT (NV04)
[ 24140.262] RIVA TNT2 (NV05)
[ 24140.262] GeForce 256 (NV10)
[ 24140.262] GeForce 2 (NV11, NV15)
[ 24140.262] GeForce 4MX (NV17, NV18)
[ 24140.262] GeForce 3 (NV20)
[ 24140.262] GeForce 4Ti (NV25, NV28)
[ 24140.262] GeForce FX (NV3x)
[ 24140.262] GeForce 6 (NV4x)
[ 24140.262] GeForce 7 (G7x)
[ 24140.262] GeForce 8 (G8x)
[ 24140.262] GeForce GTX 200 (NVA0)
[ 24140.262] GeForce GTX 400 (NVC0)
[ 24140.262] (--) using VT number 7
[ 24140.263] (II) [drm] nouveau interface version: 1.1.1
[ 24140.263] (II) Loading sub module "dri2"
[ 24140.263] (II) LoadModule: "dri2"
[ 24140.263] (II) Module "dri2" already built-in
[ 24140.263] (--) NOUVEAU(0): Chipset: "NVIDIA NVA8"
[ 24140.263] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 24140.263] (==) NOUVEAU(0): RGB weight 888
[ 24140.263] (==) NOUVEAU(0): Default visual is TrueColor
[ 24140.263] (==) NOUVEAU(0): Using HW cursor
[ 24140.263] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 24140.263] (==) NOUVEAU(0): Page flipping enabled
[ 24140.263] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 24140.298] (II) NOUVEAU(0): Output VGA-1 using monitor section Monitor0
[ 24140.321] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 24140.350] (II) NOUVEAU(0): EDID for output VGA-1
[ 24140.350] (II) NOUVEAU(0): Manufacturer: SAM Model: 36e Serial#: 1297690937
[ 24140.350] (II) NOUVEAU(0): Year: 2008 Week: 9
[ 24140.350] (II) NOUVEAU(0): EDID Version: 1.3
[ 24140.350] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 24140.350] (II) NOUVEAU(0): Sync: Separate Composite SyncOnGreen
[ 24140.350] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 38 vert.: 30
[ 24140.350] (II) NOUVEAU(0): Gamma: 2.20
[ 24140.350] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
[ 24140.350] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 24140.350] (II) NOUVEAU(0): redX: 0.641 redY: 0.337 greenX: 0.304 greenY: 0.620
[ 24140.350] (II) NOUVEAU(0): blueX: 0.141 blueY: 0.073 whiteX: 0.313 whiteY: 0.329
[ 24140.350] (II) NOUVEAU(0): Supported established timings:
[ 24140.350] (II) NOUVEAU(0): 720x400@70Hz
[ 24140.350] (II) NOUVEAU(0): 640x480@60Hz
[ 24140.350] (II) NOUVEAU(0): 640x480@67Hz
[ 24140.350] (II) NOUVEAU(0): 640x480@72Hz
[ 24140.350] (II) NOUVEAU(0): 640x480@75Hz
[ 24140.350] (II) NOUVEAU(0): 800x600@56Hz
[ 24140.350] (II) NOUVEAU(0): 800x600@60Hz
[ 24140.350] (II) NOUVEAU(0): 800x600@72Hz
[ 24140.350] (II) NOUVEAU(0): 800x600@75Hz
[ 24140.350] (II) NOUVEAU(0): 832x624@75Hz
[ 24140.350] (II) NOUVEAU(0): 1024x768@60Hz
[ 24140.350] (II) NOUVEAU(0): 1024x768@70Hz
[ 24140.350] (II) NOUVEAU(0): 1024x768@75Hz
[ 24140.350] (II) NOUVEAU(0): 1280x1024@75Hz
[ 24140.350] (II) NOUVEAU(0): 1152x864@75Hz
[ 24140.350] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 24140.350] (II) NOUVEAU(0): Supported standard timings:
[ 24140.350] (II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 24140.350] (II) NOUVEAU(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 24140.350] (II) NOUVEAU(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 24140.350] (II) NOUVEAU(0): Supported detailed timing:
[ 24140.350] (II) NOUVEAU(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 24140.350] (II) NOUVEAU(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 24140.350] (II) NOUVEAU(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 24140.350] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[ 24140.350] (II) NOUVEAU(0): Monitor name: SyncMaster
[ 24140.350] (II) NOUVEAU(0): Serial No: HMCQ218992
[ 24140.350] (II) NOUVEAU(0): EDID (in hex):
[ 24140.350] (II) NOUVEAU(0): 00ffffffffffff004c2d6e033931594d
[ 24140.350] (II) NOUVEAU(0): 091201030e261e782a1f35a4564d9e24
[ 24140.350] (II) NOUVEAU(0): 125054bfef8081808140714f01010101
[ 24140.350] (II) NOUVEAU(0): 010101010101302a009851002a403070
[ 24140.350] (II) NOUVEAU(0): 1300782d1100001e000000fd00384b1e
[ 24140.350] (II) NOUVEAU(0): 510e000a202020202020000000fc0053
[ 24140.350] (II) NOUVEAU(0): 796e634d61737465720a2020000000ff
[ 24140.350] (II) NOUVEAU(0): 00484d43513231383939320a20200031
[ 24140.350] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 24140.350] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 24140.350] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 24140.350] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 24140.350] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 24140.350] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 24140.350] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 24140.350] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 24140.350] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 24140.350] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 24140.350] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 24140.350] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 24140.350] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 24140.350] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 24140.350] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 24140.350] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 24140.350] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 24140.350] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 24140.373] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 24140.373] (II) NOUVEAU(0): Output VGA-1 connected
[ 24140.373] (II) NOUVEAU(0): Output DVI-I-1 disconnected
[ 24140.373] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 24140.373] (II) NOUVEAU(0): Output VGA-1 using initial mode 1280x1024
[ 24140.373] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 24140.373] (--) NOUVEAU(0): Virtual size is 1280x1024 (pitch 0)
[ 24140.373] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 24140.373] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 24140.373] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 24140.373] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 24140.373] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[ 24140.373] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 24140.373] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 24140.373] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 24140.373] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 24140.373] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 24140.373] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 24140.373] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 24140.373] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 24140.373] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 24140.373] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[ 24140.373] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 24140.373] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 24140.373] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 24140.373] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 24140.373] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 24140.373] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 24140.373] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 24140.373] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 24140.373] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 24140.373] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 24140.373] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 24140.373] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 24140.373] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 24140.373] (**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[ 24140.373] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 24140.373] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 24140.373] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 24140.373] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 24140.373] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 24140.373] (==) NOUVEAU(0): DPI set to (96, 96)
[ 24140.373] (II) Loading sub module "fb"
[ 24140.373] (II) LoadModule: "fb"
[ 24140.373] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 24140.374] (II) Module fb: vendor="X.Org Foundation"
[ 24140.374] compiled for 1.14.99.903, module version = 1.0.0
[ 24140.374] ABI class: X.Org ANSI C Emulation, version 0.4
[ 24140.374] (II) Loading sub module "exa"
[ 24140.374] (II) LoadModule: "exa"
[ 24140.374] (II) Loading /usr/lib64/xorg/modules/libexa.so
[ 24140.374] (II) Module exa: vendor="X.Org Foundation"
[ 24140.374] compiled for 1.14.99.903, module version = 2.6.0
[ 24140.374] ABI class: X.Org Video Driver, version 15.0
[ 24140.374] (II) Loading sub module "shadowfb"
[ 24140.374] (II) LoadModule: "shadowfb"
[ 24140.374] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so
[ 24140.374] (II) Module shadowfb: vendor="X.Org Foundation"
[ 24140.374] compiled for 1.14.99.903, module version = 1.0.0
[ 24140.374] ABI class: X.Org ANSI C Emulation, version 0.4
[ 24140.374] (--) Depth 24 pixmap format is 32 bpp
[ 24140.374] (II) NOUVEAU(0): Opened GPU channel 0
[ 24140.376] (II) NOUVEAU(0): [DRI2] Setup complete
[ 24140.376] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 24140.376] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 24140.377] (II) EXA(0): Driver allocated offscreen pixmaps
[ 24140.377] (II) EXA(0): Driver registered support for the following operations:
[ 24140.377] (II) Solid
[ 24140.377] (II) Copy
[ 24140.377] (II) Composite (RENDER acceleration)
[ 24140.377] (II) UploadToScreen
[ 24140.377] (II) DownloadFromScreen
[ 24140.377] (==) NOUVEAU(0): Backing store disabled
[ 24140.377] (==) NOUVEAU(0): Silken mouse enabled
[ 24140.377] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 24140.377] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 24140.377] (==) NOUVEAU(0): DPMS enabled
[ 24140.377] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 24140.377] (--) RandR disabled
[ 24140.391] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 24140.391] (II) AIGLX: enabled GLX_ARB_create_context
[ 24140.391] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 24140.391] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 24140.391] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 24140.391] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 24140.391] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 24140.391] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 24140.391] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 24140.391] (II) AIGLX: Loaded and initialized nouveau
[ 24140.391] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 24140.394] (II) NOUVEAU(0): NVEnterVT is called.
[ 24140.420] (II) NOUVEAU(0): Setting screen physical size to 338 x 270
[ 24140.420] resize called 1280 1024
[ 24140.547] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 24140.547] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24140.547] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24140.547] (**) Power Button: Applying InputClass "keyboard-all"
[ 24140.547] (II) LoadModule: "evdev"
[ 24140.547] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 24140.548] (II) Module evdev: vendor="X.Org Foundation"
[ 24140.548] compiled for 1.14.99.903, module version = 2.8.2
[ 24140.548] Module class: X.Org XInput Driver
[ 24140.548] ABI class: X.Org XInput driver, version 20.0
[ 24140.548] (II) Using input driver 'evdev' for 'Power Button'
[ 24140.548] (**) Power Button: always reports core events
[ 24140.548] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 24140.548] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 24140.548] (--) evdev: Power Button: Found keys
[ 24140.548] (II) evdev: Power Button: Configuring as keyboard
[ 24140.548] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 24140.548] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 24140.548] (**) Option "xkb_rules" "evdev"
[ 24140.548] (**) Option "xkb_model" "pc105"
[ 24140.548] (**) Option "xkb_layout" "us,ru"
[ 24140.548] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 24140.569] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 24140.569] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24140.569] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24140.569] (**) Power Button: Applying InputClass "keyboard-all"
[ 24140.569] (II) Using input driver 'evdev' for 'Power Button'
[ 24140.569] (**) Power Button: always reports core events
[ 24140.569] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 24140.569] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 24140.569] (--) evdev: Power Button: Found keys
[ 24140.569] (II) evdev: Power Button: Configuring as keyboard
[ 24140.569] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 24140.569] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 24140.569] (**) Option "xkb_rules" "evdev"
[ 24140.569] (**) Option "xkb_model" "pc105"
[ 24140.569] (**) Option "xkb_layout" "us,ru"
[ 24140.569] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 24140.569] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 24140.569] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event3)
[ 24140.569] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 24140.569] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 24140.569] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 24140.569] (**) Logitech USB Optical Mouse: always reports core events
[ 24140.569] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event3"
[ 24140.569] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a
[ 24140.569] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[ 24140.569] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 24140.569] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 24140.569] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 24140.569] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 24140.569] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 24140.569] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 24140.569] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 24140.569] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input155/event3"
[ 24140.569] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 8)
[ 24140.569] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 24140.569] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 24140.569] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 24140.569] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 24140.569] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 24140.570] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 24140.570] (II) No input driver specified, ignoring this device.
[ 24140.570] (II) This device may have been added with another device file.
[ 24140.570] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 24140.570] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 24140.570] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 24140.570] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard-all"
[ 24140.570] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 24140.570] (**) AT Translated Set 2 keyboard: always reports core events
[ 24140.570] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[ 24140.570] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 24140.570] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 24140.570] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 24140.570] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[ 24140.570] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 24140.570] (**) Option "xkb_rules" "evdev"
[ 24140.570] (**) Option "xkb_model" "pc105"
[ 24140.570] (**) Option "xkb_layout" "us,ru"
[ 24140.570] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 24219.930] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 24219.930] (II) NOUVEAU(0): NVLeaveVT is called.
[ 24221.901] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 24221.901] (II) NOUVEAU(0): NVEnterVT is called.
[ 24221.955] (II) NOUVEAU(0): EDID vendor "SAM", prod id 878
[ 24221.955] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[ 24221.955] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[ 24221.955] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 24221.955] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 24221.955] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 24221.955] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 24221.955] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 24221.955] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 24221.955] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 24221.955] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 24221.955] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 24221.955] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 24221.955] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 24221.955] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 24221.955] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 24221.955] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 24221.955] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 24221.955] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 24221.955] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 24221.955] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 24221.980] setversion 1.4 failed: Permission denied
dmesg
Код: Выделить всё
dmesg
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.12.4-gentoo (root@xsi) (gcc version 4.8.2 (Gentoo 4.8.2 p1.0, pie-0.5.8) ) #1 SMP PREEMPT Mon Dec 9 07:19:27 EET 2013
[ 0.000000] Command line: root=/dev/sda2
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7faffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c7fb0000-0x00000000c7fbffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000c7fc0000-0x00000000c7feffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c7ff0000-0x00000000c7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000437ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./770 Extreme3, BIOS P1.80 10/18/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x438000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000438000000 aka 17280M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xc8000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xc7fb0 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x019d0000, 0x019d0fff] PGTABLE
[ 0.000000] BRK [0x019d1000, 0x019d1fff] PGTABLE
[ 0.000000] BRK [0x019d2000, 0x019d2fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x437e00000-0x437ffffff]
[ 0.000000] [mem 0x437e00000-0x437ffffff] page 2M
[ 0.000000] BRK [0x019d3000, 0x019d3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x434000000-0x437dfffff]
[ 0.000000] [mem 0x434000000-0x437dfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x433ffffff]
[ 0.000000] [mem 0x400000000-0x433ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xc7faffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xc7dfffff] page 2M
[ 0.000000] [mem 0xc7e00000-0xc7faffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
[ 0.000000] ACPI: RSDP 00000000000fb460 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000c7fb0000 00040 (v01 101810 RSDT1744 20101018 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000c7fb0200 00084 (v02 A_M_I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000c7fb0450 08A8E (v01 AS353 AS353171 00000171 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000c7fc0000 00040
[ 0.000000] ACPI: APIC 00000000c7fb0390 0007C (v01 101810 APIC1744 20101018 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000c7fb0410 0003C (v01 101810 OEMMCFG 20101018 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000c7fc0040 00071 (v01 101810 OEMB1744 20101018 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000c7fb8ee0 000C8 (v03 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: AAFT 00000000c7fb8fb0 00027 (v01 101810 OEMAAFT 20101018 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000c7fb8fe0 00458 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea0010dfffff] PMD -> [ffff880427600000-ffff8804375fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x437ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xc7faffff]
[ 0.000000] node 0: [mem 0x100000000-0x437ffffff]
[ 0.000000] On node 0 totalpages: 4194126
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12735 pages used for memmap
[ 0.000000] DMA32 zone: 815024 pages, LIFO batch:31
[ 0.000000] Normal zone: 52736 pages used for memmap
[ 0.000000] Normal zone: 3375104 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] e820: [mem 0xc8000000-0xffefffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880437c00000 s74304 r8192 d24000 u1048576
[ 0.000000] pcpu-alloc: s74304 r8192 d24000 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4128570
[ 0.000000] Kernel command line: root=/dev/sda2
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ bc000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ bc000000
[ 0.000000] Memory: 16347676K/16776504K available (5717K kernel code, 579K rwdata, 2324K rodata, 776K init, 612K bss, 428828K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 3306.676 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6615.90 BogoMIPS (lpj=11022253)
[ 0.000141] pid_max: default: 32768 minimum: 301
[ 0.000230] Mount-cache hash table entries: 256
[ 0.000436] tseg: 0000000000
[ 0.000441] CPU: Physical Processor ID: 0
[ 0.000509] CPU: Processor Core ID: 0
[ 0.000577] mce: CPU supports 6 MCE banks
[ 0.000648] LVT offset 0 assigned for vector 0xf9
[ 0.000721] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
tlb_flushall_shift: 4
[ 0.000960] Freeing SMP alternatives memory: 20K (ffffffff81931000 - ffffffff81936000)
[ 0.001079] ACPI: Core revision 20130725
[ 0.002604] ACPI: All ACPI Tables successfully acquired
[ 0.010785] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.043893] smpboot: CPU0: AMD Phenom(tm) II X2 560 Processor (fam: 10, model: 04, stepping: 03)
[ 0.148528] Performance Events: AMD PMU driver.
[ 0.148616] ... version: 0
[ 0.148684] ... bit width: 48
[ 0.148752] ... generic registers: 4
[ 0.148820] ... value mask: 0000ffffffffffff
[ 0.148889] ... max period: 00007fffffffffff
[ 0.148958] ... fixed-purpose events: 0
[ 0.149026] ... event mask: 000000000000000f
[ 0.168606] smpboot: Booting Node 0, Processors # 1 OK
[ 0.181845] Brought up 2 CPUs
[ 0.181915] smpboot: Total of 2 processors activated (13231.81 BogoMIPS)
[ 0.184212] devtmpfs: initialized
[ 0.184441] kworker/u4:0 (21) used greatest stack depth: 6944 bytes left
[ 0.184495] NET: Registered protocol family 16
[ 0.184818] cpuidle: using governor ladder
[ 0.184887] cpuidle: using governor menu
[ 0.184959] node 0 link 0: io port [1000, ffffff]
[ 0.184961] TOM: 00000000c8000000 aka 3200M
[ 0.185030] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.185033] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.185035] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.185036] node 0 link 0: mmio [a0000, bffff]
[ 0.185038] node 0 link 0: mmio [c8000000, dfffffff]
[ 0.185039] TOM2: 0000000438000000 aka 17280M
[ 0.185108] bus: [bus 00-07] on node 0 link 0
[ 0.185109] bus: 00 [io 0x0000-0xffff]
[ 0.185110] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.185111] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.185112] bus: 00 [mem 0xc8000000-0xdfffffff]
[ 0.185112] bus: 00 [mem 0x438000000-0xfcffffffff]
[ 0.185138] ACPI: bus type PCI registered
[ 0.185273] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.185394] PCI: not using MMCONFIG
[ 0.185462] PCI: Using configuration type 1 for base access
[ 0.185531] PCI: Using configuration type 1 for extended access
[ 0.185718] kworker/u4:0 (38) used greatest stack depth: 6552 bytes left
[ 0.185799] kworker/u4:0 (43) used greatest stack depth: 6216 bytes left
[ 0.190491] bio: create slab <bio-0> at 0
[ 0.190692] ACPI: Added _OSI(Module Device)
[ 0.190761] ACPI: Added _OSI(Processor Device)
[ 0.190830] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.190898] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.191382] ACPI: EC: Look up EC in DSDT
[ 0.192089] ACPI: Executed 5 blocks of module-level executable AML code
[ 0.205460] ACPI: Interpreter enabled
[ 0.205535] ACPI: (supports S0 S5)
[ 0.205603] ACPI: Using IOAPIC for interrupt routing
[ 0.205686] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.206230] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.213509] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.299633] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.299851] acpi PNP0A03:00: Requesting ACPI _OSC control (0x1d)
[ 0.300125] acpi PNP0A03:00: ACPI _OSC control (0x18) granted
[ 0.300340] PCI host bridge to bus 0000:00
[ 0.300414] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.300484] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.300555] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.300626] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.300698] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.300769] pci_bus 0000:00: root bus resource [mem 0xc8000000-0xdfffffff]
[ 0.300840] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 0.300921] pci 0000:00:00.0: [1002:5957] type 00 class 0x060000
[ 0.300932] pci 0000:00:00.0: reg 0x1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.301045] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
[ 0.301082] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.301160] pci 0000:00:05.0: [1002:597b] type 01 class 0x060400
[ 0.301194] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.301255] pci 0000:00:06.0: [1002:597c] type 01 class 0x060400
[ 0.301288] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.301353] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
[ 0.301386] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.301464] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[ 0.301486] pci 0000:00:11.0: reg 0x10: [io 0x9000-0x9007]
[ 0.301496] pci 0000:00:11.0: reg 0x14: [io 0x8000-0x8003]
[ 0.301505] pci 0000:00:11.0: reg 0x18: [io 0x7000-0x7007]
[ 0.301514] pci 0000:00:11.0: reg 0x1c: [io 0x6000-0x6003]
[ 0.301523] pci 0000:00:11.0: reg 0x20: [io 0x5000-0x500f]
[ 0.301533] pci 0000:00:11.0: reg 0x24: [mem 0xfceff800-0xfceffbff]
[ 0.301553] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.301727] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.301741] pci 0000:00:12.0: reg 0x10: [mem 0xfcefe000-0xfcefefff]
[ 0.301857] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 0.301870] pci 0000:00:12.1: reg 0x10: [mem 0xfcefd000-0xfcefdfff]
[ 0.301996] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.302019] pci 0000:00:12.2: reg 0x10: [mem 0xfceff000-0xfceff0ff]
[ 0.302104] pci 0000:00:12.2: supports D1 D2
[ 0.302105] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.302176] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.302190] pci 0000:00:13.0: reg 0x10: [mem 0xfcefc000-0xfcefcfff]
[ 0.302308] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 0.302321] pci 0000:00:13.1: reg 0x10: [mem 0xfcefb000-0xfcefbfff]
[ 0.302442] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.302461] pci 0000:00:13.2: reg 0x10: [mem 0xfcefa800-0xfcefa8ff]
[ 0.302545] pci 0000:00:13.2: supports D1 D2
[ 0.302547] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.302621] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.302772] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.302788] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.302798] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.302807] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.302816] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.302825] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
[ 0.302930] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.303057] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.303149] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.303163] pci 0000:00:14.5: reg 0x10: [mem 0xfcef9000-0xfcef9fff]
[ 0.303280] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.303346] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.303408] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.303472] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.303538] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.303663] pci 0000:02:00.0: [10de:10c3] type 00 class 0x030000
[ 0.303673] pci 0000:02:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.303683] pci 0000:02:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.303693] pci 0000:02:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref]
[ 0.303700] pci 0000:02:00.0: reg 0x24: [io 0xb800-0xb87f]
[ 0.303706] pci 0000:02:00.0: reg 0x30: [mem 0xfe980000-0xfe9fffff pref]
[ 0.303788] pci 0000:02:00.1: [10de:0be3] type 00 class 0x040300
[ 0.303798] pci 0000:02:00.1: reg 0x10: [mem 0xfe97c000-0xfe97ffff]
[ 0.311978] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.312052] pci 0000:00:02.0: bridge window [io 0xb000-0xbfff]
[ 0.312055] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe9fffff]
[ 0.312058] pci 0000:00:02.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.312138] pci 0000:03:00.0: [1b4b:91a0] type 00 class 0x01018f
[ 0.312155] pci 0000:03:00.0: reg 0x10: [io 0xd800-0xd807]
[ 0.312165] pci 0000:03:00.0: reg 0x14: [io 0xd400-0xd403]
[ 0.312175] pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd007]
[ 0.312185] pci 0000:03:00.0: reg 0x1c: [io 0xc800-0xc803]
[ 0.312195] pci 0000:03:00.0: reg 0x20: [io 0xc400-0xc40f]
[ 0.312206] pci 0000:03:00.0: reg 0x24: [mem 0xfeaff800-0xfeafffff]
[ 0.312216] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.312265] pci 0000:03:00.0: PME# supported from D3hot
[ 0.321986] pci 0000:00:05.0: PCI bridge to [bus 03]
[ 0.322060] pci 0000:00:05.0: bridge window [io 0xc000-0xdfff]
[ 0.322062] pci 0000:00:05.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.322153] pci 0000:04:00.0: [1b73:1000] type 00 class 0x0c0330
[ 0.322176] pci 0000:04:00.0: reg 0x10: [mem 0xfebf0000-0xfebfffff]
[ 0.322328] pci 0000:04:00.0: PME# supported from D0 D3hot
[ 0.331997] pci 0000:00:06.0: PCI bridge to [bus 04]
[ 0.332071] pci 0000:00:06.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.332152] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.332166] pci 0000:01:00.0: reg 0x10: [io 0xa800-0xa8ff]
[ 0.332186] pci 0000:01:00.0: reg 0x18: [mem 0xcdfff000-0xcdffffff 64bit pref]
[ 0.332199] pci 0000:01:00.0: reg 0x20: [mem 0xcdff8000-0xcdffbfff 64bit pref]
[ 0.332208] pci 0000:01:00.0: reg 0x30: [mem 0xfcfe0000-0xfcffffff pref]
[ 0.332255] pci 0000:01:00.0: supports D1 D2
[ 0.332256] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.342003] pci 0000:00:0a.0: PCI bridge to [bus 01]
[ 0.342077] pci 0000:00:0a.0: bridge window [io 0xa000-0xafff]
[ 0.342079] pci 0000:00:0a.0: bridge window [mem 0xfcf00000-0xfcffffff]
[ 0.342082] pci 0000:00:0a.0: bridge window [mem 0xcdf00000-0xcdffffff 64bit pref]
[ 0.342157] pci 0000:05:06.0: [1274:1371] type 00 class 0x040100
[ 0.342180] pci 0000:05:06.0: reg 0x10: [io 0xe800-0xe83f]
[ 0.342280] pci 0000:05:06.0: supports D2
[ 0.342365] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
[ 0.342440] pci 0000:00:14.4: bridge window [io 0xe000-0xefff]
[ 0.342446] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.342448] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.342449] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.342451] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.342452] pci 0000:00:14.4: bridge window [mem 0xc8000000-0xdfffffff] (subtractive decode)
[ 0.342454] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.342476] pci_bus 0000:00: on NUMA node 0
[ 0.378815] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[ 0.379073] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
[ 0.379327] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.379579] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
[ 0.379832] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.380167] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 *10 11 12 14 15)
[ 0.380420] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 *10 11 12 14 15)
[ 0.380655] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.381078] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.381188] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.381210] Found 1 acpi root devices
[ 0.381317] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.381438] vgaarb: loaded
[ 0.381505] vgaarb: bridge control possible 0000:02:00.0
[ 0.381671] SCSI subsystem initialized
[ 0.381823] libata version 3.00 loaded.
[ 0.381826] ACPI: bus type USB registered
[ 0.381944] usbcore: registered new interface driver usbfs
[ 0.382048] usbcore: registered new interface driver hub
[ 0.382157] usbcore: registered new device driver usb
[ 0.383484] wmi: Mapper loaded
[ 0.383579] Advanced Linux Sound Architecture Driver Initialized.
[ 0.383651] PCI: Using ACPI for IRQ routing
[ 0.392638] PCI: pci_cache_line_size set to 64 bytes
[ 0.392644] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 0.392818] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.392820] e820: reserve RAM buffer [mem 0xc7fb0000-0xc7ffffff]
[ 0.393003] Switched to clocksource refined-jiffies
[ 0.395591] pnp: PnP ACPI init
[ 0.395663] ACPI: bus type PNP registered
[ 0.395759] pnp 00:00: [dma 4]
[ 0.395792] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.395843] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.395877] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.395915] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.396080] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.396180] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.396252] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.396324] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.396477] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.396550] system 00:06: [io 0x040b] has been reserved
[ 0.396620] system 00:06: [io 0x04d6] has been reserved
[ 0.396690] system 00:06: [io 0x0c00-0x0c01] has been reserved
[ 0.396761] system 00:06: [io 0x0c14] has been reserved
[ 0.396831] system 00:06: [io 0x0c50-0x0c51] has been reserved
[ 0.396901] system 00:06: [io 0x0c52] has been reserved
[ 0.396971] system 00:06: [io 0x0c6c] has been reserved
[ 0.397041] system 00:06: [io 0x0c6f] has been reserved
[ 0.397111] system 00:06: [io 0x0cd0-0x0cd1] has been reserved
[ 0.397181] system 00:06: [io 0x0cd2-0x0cd3] has been reserved
[ 0.397251] system 00:06: [io 0x0cd4-0x0cd5] has been reserved
[ 0.397322] system 00:06: [io 0x0cd6-0x0cd7] has been reserved
[ 0.397393] system 00:06: [io 0x0cd8-0x0cdf] has been reserved
[ 0.397463] system 00:06: [io 0x0800-0x089f] could not be reserved
[ 0.397534] system 00:06: [io 0x0b00-0x0b0f] has been reserved
[ 0.397605] system 00:06: [io 0x0b20-0x0b3f] has been reserved
[ 0.397677] system 00:06: [io 0x0900-0x090f] has been reserved
[ 0.397748] system 00:06: [io 0x0910-0x091f] has been reserved
[ 0.397818] system 00:06: [io 0xfe00-0xfefe] has been reserved
[ 0.397889] system 00:06: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.397961] system 00:06: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.398033] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.398095] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.398254] pnp 00:08: [dma 0 disabled]
[ 0.398313] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.398410] system 00:09: [io 0x0280-0x028f] has been reserved
[ 0.398483] system 00:09: [io 0x0290-0x029f] has been reserved
[ 0.398554] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.398617] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.398690] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.435513] pnp 00:0b: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.435638] pnp 00:0b: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.435762] pnp 00:0b: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.435885] pnp 00:0b: disabling [mem 0x00100000-0xc7ffffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.436071] system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.436146] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.436219] pnp: PnP ACPI: found 12 devices
[ 0.436288] ACPI: bus type PNP unregistered
[ 0.440959] Switched to clocksource acpi_pm
[ 0.441050] pci 0000:00:05.0: BAR 9: assigned [mem 0xc8000000-0xc80fffff pref]
[ 0.441169] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.441239] pci 0000:00:02.0: bridge window [io 0xb000-0xbfff]
[ 0.441311] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe9fffff]
[ 0.441383] pci 0000:00:02.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.441504] pci 0000:03:00.0: BAR 6: assigned [mem 0xc8000000-0xc800ffff pref]
[ 0.441622] pci 0000:00:05.0: PCI bridge to [bus 03]
[ 0.441691] pci 0000:00:05.0: bridge window [io 0xc000-0xdfff]
[ 0.441763] pci 0000:00:05.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.441835] pci 0000:00:05.0: bridge window [mem 0xc8000000-0xc80fffff pref]
[ 0.441955] pci 0000:00:06.0: PCI bridge to [bus 04]
[ 0.442025] pci 0000:00:06.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.442107] pci 0000:00:0a.0: PCI bridge to [bus 01]
[ 0.442184] pci 0000:00:0a.0: bridge window [io 0xa000-0xafff]
[ 0.442255] pci 0000:00:0a.0: bridge window [mem 0xfcf00000-0xfcffffff]
[ 0.442327] pci 0000:00:0a.0: bridge window [mem 0xcdf00000-0xcdffffff 64bit pref]
[ 0.442447] pci 0000:00:14.4: PCI bridge to [bus 05]
[ 0.442518] pci 0000:00:14.4: bridge window [io 0xe000-0xefff]
[ 0.442599] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.442600] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.442601] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.442603] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.442604] pci_bus 0000:00: resource 8 [mem 0xc8000000-0xdfffffff]
[ 0.442605] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.442607] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
[ 0.442608] pci_bus 0000:02: resource 1 [mem 0xfd000000-0xfe9fffff]
[ 0.442609] pci_bus 0000:02: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.442611] pci_bus 0000:03: resource 0 [io 0xc000-0xdfff]
[ 0.442612] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.442614] pci_bus 0000:03: resource 2 [mem 0xc8000000-0xc80fffff pref]
[ 0.442615] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.442616] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.442618] pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfcffffff]
[ 0.442619] pci_bus 0000:01: resource 2 [mem 0xcdf00000-0xcdffffff 64bit pref]
[ 0.442621] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.442622] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.442623] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.442624] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.442626] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.442627] pci_bus 0000:05: resource 8 [mem 0xc8000000-0xdfffffff]
[ 0.442628] pci_bus 0000:05: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.442649] NET: Registered protocol family 2
[ 0.442808] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.443331] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.443657] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.443761] TCP: reno registered
[ 0.443831] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.443977] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.444157] NET: Registered protocol family 1
[ 0.444295] RPC: Registered named UNIX socket transport module.
[ 0.444387] RPC: Registered udp transport module.
[ 0.444457] RPC: Registered tcp transport module.
[ 0.444526] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.868172] pci 0000:02:00.0: Boot video device
[ 0.868396] PCI: CLS 64 bytes, default 64
[ 0.868420] PCI-DMA: Disabling AGP.
[ 0.868543] PCI-DMA: aperture base @ bc000000 size 65536 KB
[ 0.868613] PCI-DMA: using GART IOMMU.
[ 0.868682] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.872428] LVT offset 1 assigned for vector 0x400
[ 0.872506] IBS: LVT offset 1 assigned
[ 0.872590] perf: AMD IBS detected (0x0000001f)
[ 0.872998] microcode: CPU0: patch_level=0x010000b6
[ 0.873071] microcode: CPU1: patch_level=0x010000b6
[ 0.873179] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.873789] sha1_ssse3: Neither AVX nor SSSE3 is available/usable.
[ 0.874443] bounce pool size: 64 pages
[ 0.874514] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.877348] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.877536] NTFS driver 2.1.30 [Flags: R/O].
[ 0.877750] msgmni has been set to 32057
[ 0.878706] NET: Registered protocol family 38
[ 0.878848] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.878967] io scheduler noop registered
[ 0.879074] io scheduler cfq registered (default)
[ 0.879392] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[ 0.879461] crc32: self tests passed, processed 225944 bytes in 119009 nsec
[ 0.879656] crc32c: CRC_LE_BITS = 64
[ 0.879723] crc32c: self tests passed, processed 225944 bytes in 60343 nsec
[ 0.879819] xz_dec_test: module loaded
[ 0.879887] xz_dec_test: Create a device node with 'mknod xz_dec_test c 252 0' and write .xz files to it.
[ 0.880198] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.880368] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[ 0.880428] pcieport 0000:00:06.0: irq 42 for MSI/MSI-X
[ 0.880544] pcieport 0000:00:0a.0: irq 43 for MSI/MSI-X
[ 0.884925] hpet_acpi_add: no address or irqs in _CRS
[ 0.885033] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 0.885154] Hangcheck: Using getrawmonotonic().
[ 0.885336] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.885459] ACPI: Power Button [PWRB]
[ 0.885572] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.885693] ACPI: Power Button [PWRF]
[ 0.885985] [drm] Initialized drm 1.1.0 20060810
[ 0.886280] nouveau [ DEVICE][0000:02:00.0] BOOT0 : 0x0a8180b1
[ 0.886352] nouveau [ DEVICE][0000:02:00.0] Chipset: GT218 (NVA8)
[ 0.886422] nouveau [ DEVICE][0000:02:00.0] Family : NV50
[ 0.887005] nouveau [ VBIOS][0000:02:00.0] checking PRAMIN for image...
[ 0.954433] nouveau [ VBIOS][0000:02:00.0] ... appears to be valid
[ 0.954505] nouveau [ VBIOS][0000:02:00.0] using image from PRAMIN
[ 0.954697] nouveau [ VBIOS][0000:02:00.0] BIT signature found
[ 0.954769] nouveau [ VBIOS][0000:02:00.0] version 70.18.75.00.00
[ 0.955295] nouveau [ PFB][0000:02:00.0] RAM type: DDR2
[ 0.955365] nouveau [ PFB][0000:02:00.0] RAM size: 256 MiB
[ 0.955436] nouveau [ PFB][0000:02:00.0] ZCOMP: 960 tags
[ 1.875758] tsc: Refined TSC clocksource calibration: 3306.565 MHz
[ 2.022580] nouveau [ PTHERM][0000:02:00.0] FAN control: none / external
[ 2.022655] nouveau [ PTHERM][0000:02:00.0] fan management: disabled
[ 2.022728] nouveau [ PTHERM][0000:02:00.0] internal sensor: yes
[ 2.022890] [TTM] Zone kernel: Available graphics memory: 8206824 kiB
[ 2.022961] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 2.023032] [TTM] Initializing pool allocator
[ 2.023102] [TTM] Initializing DMA pool allocator
[ 2.023177] nouveau [ DRM] VRAM: 256 MiB
[ 2.023245] nouveau [ DRM] GART: 1048576 MiB
[ 2.023316] nouveau [ DRM] TMDS table version 2.0
[ 2.023385] nouveau [ DRM] DCB version 4.0
[ 2.023455] nouveau [ DRM] DCB outp 00: 01000310 00020030
[ 2.023525] nouveau [ DRM] DCB outp 01: 02011300 00000000
[ 2.023595] nouveau [ DRM] DCB outp 02: 01011302 0f220030
[ 2.023666] nouveau [ DRM] DCB conn 00: 00000000
[ 2.023752] nouveau [ DRM] DCB conn 01: 00001130
[ 2.030288] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.030360] [drm] No driver support for vblank timestamp query.
[ 2.030505] nouveau [ DRM] 3 available performance level(s)
[ 2.030577] nouveau [ DRM] 0: core 135MHz shader 270MHz memory 135MHz voltage 850mV
[ 2.030696] nouveau [ DRM] 1: core 405MHz shader 810MHz memory 270MHz voltage 900mV
[ 2.030816] nouveau [ DRM] 3: core 567MHz shader 1340MHz memory 350MHz voltage 1000mV
[ 2.030935] nouveau [ DRM] c: core 405MHz shader 810MHz memory 405MHz voltage 900mV
[ 2.038064] nouveau [ DRM] MM: using COPY for buffer copies
[ 2.080948] nouveau [ DRM] allocated 1280x1024 fb: 0x60000, bo ffff880424851c00
[ 2.081184] fbcon: nouveaufb (fb0) is primary device
[ 2.166184] Console: switching to colour frame buffer device 160x64
[ 2.168134] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
[ 2.168151] nouveau 0000:02:00.0: registered panic notifier
[ 2.168166] [drm] Initialized nouveau 1.1.1 20120801 for 0000:02:00.0 on minor 0
[ 2.169543] brd: module loaded
[ 2.170255] loop: module loaded
[ 2.170322] Uniform Multi-Platform E-IDE driver
[ 2.170486] ahci 0000:00:11.0: version 3.0
[ 2.170595] ahci 0000:00:11.0: irq 44 for MSI/MSI-X
[ 2.170671] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.170679] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 2.171267] scsi0 : ahci
[ 2.171356] scsi1 : ahci
[ 2.171439] scsi2 : ahci
[ 2.171516] scsi3 : ahci
[ 2.171581] ata1: SATA max UDMA/133 abar m1024@0xfceff800 port 0xfceff900 irq 44
[ 2.171587] ata2: SATA max UDMA/133 abar m1024@0xfceff800 port 0xfceff980 irq 44
[ 2.171593] ata3: SATA max UDMA/133 abar m1024@0xfceff800 port 0xfceffa00 irq 44
[ 2.171599] ata4: SATA max UDMA/133 abar m1024@0xfceff800 port 0xfceffa80 irq 44
[ 2.171869] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 2.172468] scsi4 : pata_atiixp
[ 2.172543] scsi5 : pata_atiixp
[ 2.172606] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 2.172611] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 2.173064] scsi6 : pata_marvell
[ 2.173146] scsi7 : pata_marvell
[ 2.173207] ata7: PATA max UDMA/100 cmd 0xd800 ctl 0xd400 bmdma 0xc400 irq 17
[ 2.173212] ata8: PATA max UDMA/133 cmd 0xd000 ctl 0xc800 bmdma 0xc408 irq 17
[ 2.173498] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.173666] r8169 0000:01:00.0: irq 45 for MSI/MSI-X
[ 2.173777] r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xffffc90010184000, 00:25:22:8f:f2:ba, XID 081000c0 IRQ 45
[ 2.173785] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.173820] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.173825] ehci-pci: EHCI PCI platform driver
[ 2.173910] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 2.173918] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.173925] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.173940] ehci-pci 0000:00:12.2: debug port 1
[ 2.174161] ehci-pci 0000:00:12.2: irq 17, io mem 0xfceff000
[ 2.182749] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.183130] hub 1-0:1.0: USB hub found
[ 2.183347] hub 1-0:1.0: 6 ports detected
[ 2.183957] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 2.184328] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.184877] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.185439] ehci-pci 0000:00:13.2: debug port 1
[ 2.186005] ehci-pci 0000:00:13.2: irq 19, io mem 0xfcefa800
[ 2.196096] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.196419] hub 2-0:1.0: USB hub found
[ 2.196652] hub 2-0:1.0: 6 ports detected
[ 2.197184] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.197580] ohci-pci: OHCI PCI platform driver
[ 2.198176] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 2.198601] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 2.199122] ohci-pci 0000:00:12.0: irq 16, io mem 0xfcefe000
[ 2.256983] hub 3-0:1.0: USB hub found
[ 2.257167] hub 3-0:1.0: 3 ports detected
[ 2.257476] ohci-pci 0000:00:12.1: OHCI PCI host controller
[ 2.257839] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 2.258347] ohci-pci 0000:00:12.1: irq 16, io mem 0xfcefd000
[ 2.313708] hub 4-0:1.0: USB hub found
[ 2.313886] hub 4-0:1.0: 3 ports detected
[ 2.314206] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 2.314612] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 2.315130] ohci-pci 0000:00:13.0: irq 18, io mem 0xfcefc000
[ 2.343369] ata7.01: ATA-9: M4-CT064M4SSD2, 000F, max UDMA/100
[ 2.343542] ata7.01: 125045424 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.349993] ata7.01: configured for UDMA/100
[ 2.370431] hub 5-0:1.0: USB hub found
[ 2.370600] hub 5-0:1.0: 3 ports detected
[ 2.370906] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 2.371295] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 2.371797] ohci-pci 0000:00:13.1: irq 18, io mem 0xfcefb000
[ 2.427159] hub 6-0:1.0: USB hub found
[ 2.427361] hub 6-0:1.0: 3 ports detected
[ 2.427671] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 2.428045] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 2.428572] ohci-pci 0000:00:14.5: irq 18, io mem 0xfcef9000
[ 2.483887] hub 7-0:1.0: USB hub found
[ 2.484088] hub 7-0:1.0: 2 ports detected
[ 2.484460] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 2.484832] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8
[ 2.489729] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.489967] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.490214] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.490710] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.491300] scsi 6:0:1:0: Direct-Access ATA M4-CT064M4SSD2 000F PQ: 0 ANSI: 5
[ 2.491875] sd 6:0:1:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 2.491901] sd 6:0:1:0: Attached scsi generic sg0 type 0
[ 2.492854] sd 6:0:1:0: [sda] Write Protect is off
[ 2.493337] sd 6:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 2.493350] sd 6:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.494205] sda: sda1 sda2 sda3
[ 2.494573] sd 6:0:1:0: [sda] Attached SCSI disk
[ 2.543110] usb 1-6: new high-speed USB device number 3 using ehci-pci
[ 2.606982] hub 8-0:1.0: USB hub found
[ 2.607192] hub 8-0:1.0: 1 port detected
[ 2.607434] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 2.607895] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 9
[ 2.608548] hub 9-0:1.0: USB hub found
[ 2.608950] hub 9-0:1.0: 1 port detected
[ 2.609573] usbcore: registered new interface driver usblp
[ 2.610039] usbcore: registered new interface driver usb-storage
[ 2.610581] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.611033] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.612287] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.612579] mousedev: PS/2 mouse device common for all mice
[ 2.612970] rtc_cmos 00:01: RTC can wake from S4
[ 2.613378] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 2.613830] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
[ 2.614397] i2c /dev entries driver
[ 2.615485] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
[ 2.615736] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.616322] usbcore: registered new interface driver usbhid
[ 2.616577] usbhid: USB HID core driver
[ 2.617188] Netfilter messages via NETLINK v0.30.
[ 2.617691] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 2.618354] ctnetlink v0.93: registering with nfnetlink.
[ 2.618856] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.619389] TCP: cubic registered
[ 2.619943] NET: Registered protocol family 17
[ 2.621194] acpi-cpufreq: overriding BIOS provided _PSD data
[ 2.621432] ALSA device list:
[ 2.621666] No soundcards found.
[ 2.635681] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 2.668634] VFS: Mounted root (ext2 filesystem) readonly on device 8:2.
[ 2.669232] devtmpfs: mounted
[ 2.670020] Freeing unused kernel memory: 776K (ffffffff8186f000 - ffffffff81931000)
[ 2.673179] usb-storage 1-6:1.0: USB Mass Storage device detected
[ 2.673474] scsi8 : usb-storage 1-6:1.0
[ 2.730382] setfont (1096) used greatest stack depth: 5736 bytes left
[ 2.756496] loadkeys (1098) used greatest stack depth: 4640 bytes left
[ 2.756840] init-early.sh (1095) used greatest stack depth: 4544 bytes left
[ 2.876801] Switched to clocksource tsc
[ 2.933510] usb 3-3: new low-speed USB device number 2 using ohci-pci
[ 2.935604] systemd-udevd[1243]: starting version 208
[ 3.098913] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input3
[ 3.098959] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-3/input0
[ 3.678072] scsi 8:0:0:0: Direct-Access JetFlash Transcend 16GB 1.00 PQ: 0 ANSI: 5
[ 3.678218] sd 8:0:0:0: Attached scsi generic sg1 type 0
[ 3.678816] sd 8:0:0:0: [sdb] 30871552 512-byte logical blocks: (15.8 GB/14.7 GiB)
[ 3.679189] sd 8:0:0:0: [sdb] Write Protect is off
[ 3.679192] sd 8:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 3.679567] sd 8:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[ 3.682447] sdb: sdb1
[ 3.685319] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 5.106866] vboxdrv: Found 2 processor cores.
[ 5.107232] vboxdrv: fAsync=0 offMin=0x37e offMax=0xa39
[ 5.107266] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 5.107267] vboxdrv: Successfully loaded version 4.3.4 (interface 0x001a0005).
[ 5.701122] r8169 0000:01:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168d-1.fw (-2)
[ 5.714253] r8169 0000:01:00.0 eth0: link down
[ 8.678626] r8169 0000:01:00.0 eth0: link up
[ 4385.632499] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[ 4413.696096] usb 3-3: USB disconnect, device number 2
[ 4415.515272] usb 3-3: new low-speed USB device number 3 using ohci-pci
[ 4415.687308] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input4
[ 4415.687366] hid-generic 0003:046D:C05A.0002: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-3/input0
[ 4475.749931] usb 3-3: USB disconnect, device number 3
[ 4477.571260] usb 3-3: new low-speed USB device number 4 using ohci-pci
[ 4477.743171] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input5
[ 4477.743227] hid-generic 0003:046D:C05A.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-3/input0
[ 4537.805791] usb 3-3: USB disconnect, device number 4
[ 4539.497114] usb 3-3: new low-speed USB device number 5 using ohci-pci
[ 4539.665892] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input6
[ 4539.665968] hid-generic 0003:046D:C05A.0004: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-3/input0
[ 4599.728543] usb 3-3: USB disconnect, device number 5
[ 4601.546430] usb 3-3: new low-speed USB device number 6 using ohci-pci
[ 4601.714757] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input7
[ 4601.714813] hid-generic 0003:046D:C05A.0005: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-3/input0
[ 4661.777375] usb 3-3: USB disconnect, device number 6
[ 4663.592404] usb 3-3: new low-speed USB device number 7 using ohci-pci
[ 4663.760610] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input8
[ 4663.760667] hid-generic 0003:046D:C05A.0006: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-3/input0
[ 4723.823244] usb 3-3: USB disconnect, device number 7
[ 4725.635047] usb 3-3: new low-speed USB device number 8 using ohci-pci
[ 4725.806469] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input9
[ 4725.806528] hid-generic 0003:046D:C05A.0007: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-3/input0
[ 4785.869093] usb 3-3: USB disconnect, device number 8
[ 4787.681024] usb 3-3: new low-speed USB device number 9 using ohci-pci
[ 4787.853322] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input10
[ 4787.853379] hid-generic 0003:046D:C05A.0008: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-3/input0
[ 4847.915948] usb 3-3: USB disconnect, device number 9
[ 4849.606879] usb 3-3: new low-speed USB device number 10 using ohci-pci
[ 4849.775048] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input11
[ 4849.775146] hid-generic 0003:046D:C05A.0009: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-3/input0
[ 4909.837696] usb 3-3: USB disconnect, device number 10
[ 4911.659526] usb 3-3: new low-speed USB device number 11 using ohci-pci
[ 4911.827907] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input12
[ 4911.828004] hid-generic 0003:046D:C05A.000A: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-3/input0
[ 4971.890544] usb 3-3: USB disconnect, device number 11
[ 4973.705509] usb 3-3: new low-speed USB device number 12 using ohci-pci
[ 4973.873760] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input13
[ 4973.873856] hid-generic 0003:046D:C05A.000B: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-3/input0
[ 5033.936399] usb 3-3: USB disconnect, device number 12
[ 5035.754821] usb 3-3: new low-speed USB device number 13 using ohci-pci
[ 5035.919617] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input14
[ 5035.919714] hid-generic 0003:046D:C05A.000C: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-3/input0
[ 5095.982268] usb 3-3: USB disconnect, device number 13
[ 5097.807476] usb 3-3: new low-speed USB device number 14 using ohci-pci
[ 5097.975484] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input15
[ 5097.975540] hid-generic 0003:046D:C05A.000D: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-3/input0
[ 5158.038112] usb 3-3: USB disconnect, device number 14
[ 5159.853450] usb 3-3: new low-speed USB device number 15 using ohci-pci
[ 5160.018334] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input16
[ 5160.018391] hid-generic 0003:046D:C05A.000E: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-3/input0
[ 5220.080958] usb 3-3: USB disconnect, device number 15
[ 5221.899423] usb 3-3: new low-speed USB device number 16 using ohci-pci
[ 5222.068193] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input17
[ 5222.068249] hid-generic 0003:046D:C05A.000F: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-3/input0
[ 5282.130845] usb 3-3: USB disconnect, device number 16
[ 5283.952078] usb 3-3: new low-speed USB device number 17 using ohci-pci
[ 5284.124063] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input18
[ 5284.124120] hid-generic 0003:046D:C05A.0010: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-3/input0
[ 5344.186690] usb 3-3: USB disconnect, device number 17
[ 5346.008066] usb 3-3: new low-speed USB device number 18 using ohci-pci
[ 5346.176922] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input19
[ 5346.177001] hid-generic 0003:046D:C05A.0011: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-3/input0
[ 5406.239552] usb 3-3: USB disconnect, device number 18
~/.bashrc:
Код: Выделить всё
cat ~/.bashrc
# /etc/skel/.bashrc
#
# This file is sourced by all *interactive* bash shells on startup,
# including some apparently interactive shells such as scp and rcp
# that can't tolerate any output. So make sure this doesn't display
# anything or bad things will happen !
# Test for an interactive shell. There is no need to set anything
# past this point for scp and rcp, and it's important to refrain from
# outputting anything in those cases.
if [[ $- != *i* ]] ; then
# Shell is non-interactive. Be done now!
return
fi
# Put your fun stuff here.
startx
cat ~/.profile - не существует файла
lspci
Код: Выделить всё
lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RX780/RX790 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RX780/RD790 PCI to PCI bridge (external gfx0 port A)
00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RX780/RD790 PCI to PCI bridge (PCI express gpp port B)
00:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD790 PCI to PCI bridge (PCI express gpp port C)
00:0a.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD790 PCI to PCI bridge (PCI express gpp port F)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 3c)
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03)
02:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 8400 GS Rev. 3] (rev a2)
02:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE91A0 SATA 6Gb/s Controller (rev 12)
04:00.0 USB controller: Fresco Logic FL1000G USB 3.0 Host Controller (rev 01)
05:06.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08)
Содержимое /etc/inittab:
Код: Выделить всё
#
# /etc/inittab: This file describes how the INIT process should set up
# the system in a certain run-level.
#
# Author: Miquel van Smoorenburg, <miquels@cistron.nl>
# Modified by: Patrick J. Volkerding, <volkerdi@ftp.cdrom.com>
# Modified by: Daniel Robbins, <drobbins@gentoo.org>
# Modified by: Martin Schlemmer, <azarah@gentoo.org>
# Modified by: Mike Frysinger, <vapier@gentoo.org>
# Modified by: Robin H. Johnson, <robbat2@gentoo.org>
#
# $Header: /var/cvsroot/gentoo-x86/sys-apps/sysvinit/files/inittab-2.87,v 1.1 2010/01/08 16:55:07 williamh Exp $
# Default runlevel.
id:3:initdefault:
# System initialization, mount local filesystems, etc.
si::sysinit:/sbin/rc sysinit
# Further system initialization, brings up the boot runlevel.
rc::bootwait:/sbin/rc boot
l0:0:wait:/sbin/rc shutdown
l0s:0:wait:/sbin/halt -dhp
l1:1:wait:/sbin/rc single
l2:2:wait:/sbin/rc nonetwork
l3:3:wait:/sbin/rc default
l4:4:wait:/sbin/rc default
l5:5:wait:/sbin/rc default
l6:6:wait:/sbin/rc reboot
l6r:6:wait:/sbin/reboot -dk
#z6:6:respawn:/sbin/sulogin
# new-style single-user
su0:S:wait:/sbin/rc single
su1:S:wait:/sbin/sulogin
# TERMINALS
c1:12345:respawn:/sbin/agetty 38400 tty1 linux
c2:2345:respawn:/sbin/agetty 38400 tty2 linux
c3:2345:respawn:/sbin/agetty 38400 tty3 linux
c4:2345:respawn:/sbin/agetty 38400 tty4 linux
c5:2345:respawn:/sbin/agetty 38400 tty5 linux
c6:2345:respawn:/sbin/agetty 38400 tty6 linux
# SERIAL CONSOLES
#s0:12345:respawn:/sbin/agetty 115200 ttyS0 vt100
#s1:12345:respawn:/sbin/agetty 115200 ttyS1 vt100
# What to do at the "Three Finger Salute".
ca:12345:ctrlaltdel:/sbin/shutdown -r now
# Used by /etc/init.d/xdm to control DM startup.
# Read the comments in /etc/init.d/xdm for more
# info. Do NOT remove, as this will start nothing
# extra at boot if /etc/init.d/xdm is not added
# to the "default" runlevel.
x:a:once:/etc/X11/startDM.sh