USB (как научить линуху его видеть без перекомпиляции?)

[REN]

Как научить линуху видеть USB без перекомпиляции ядра? У меня стоит Alt Master 2.4. Заранее спасибо

[clx]

Какой девайс не видится? В Alt Master 2.4 USB работает из коробки..

[REN]

Какой девайс не видится? В Alt Master 2.4 USB работает из коробки..

Что такое девайс?...

Просто не видит подключенный к нему принтер и модем. КРРР не находит модем ни на одном из usb

[clx]

девайс - device - устройство
Какой принтер?

[estarchak]

Модем аппаратный?

Вывод команды dmesg сразу после подключения сначала модема, потом принтера.

[REN]

принтер Z25 от lexmark (usb); Debian 2.3

выводит следующее:

debian:~# dmesg
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4084 blocks [1 disk] into ram disk... done.
Freeing initrd memory: 4084k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 116k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
ICH2: IDE controller at PCI slot 00:1f.1
ICH2: chipset revision 5
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST380011A, ATA DISK drive
blk: queue d0829cc0, I/O limit 4095Mb (mask 0xffffffff)
hdc: _NEC CD-RW NR-9300A, ATAPI CD/DVD-ROM drive
hdd: _NEC DVD_RW ND-3520A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(100)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 >
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 289128k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
Real Time Clock Driver v1.10f
hdc: attached ide-cdrom driver.
hdc: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
hdd: attached ide-cdrom driver.
hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
MSDOS FS: IO charset koi8-r
MSDOS FS: Using codepage 866
MSDOS FS: IO charset koi8-r
MSDOS FS: Using codepage 866
Linux agpgart interface v0.99 © Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Detected Intel i845 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Intel 810 + AC97 Audio, version 1.01, 17:06:52 May 16 2005
PCI: Setting latency timer of device 00:1f.5 to 64
i810: Intel ICH2 found at IO 0xc000 and 0xbc00, MEM 0x0000 and 0x0000, IRQ 10
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
ac97_codec: AC97 Audio codec, id: ADS96 (Analog Devices AD1885)
i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not present), total channels = 2
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 17:07:23 May 16 2005
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1f.2 to 64
usb-uhci.c: USB UHCI at I/O 0xb000, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1f.4 to 64
usb-uhci.c: USB UHCI at I/O 0xb800, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: new USB device 00:1f.2-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x43d/0x57) is not claimed by any active driver.
hub.c: new USB device 00:1f.4-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x67b/0x2303) is not claimed by any active driver.
uhci.c: USB Universal Host Controller Interface driver v1.1
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero


Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(25 7b) interleave(1) type(1)
Search for id:(bf 57) interleave(1) type(1)
Search for id:(25 7b) interleave(1) type(1)
Search for id:(25 2d) interleave(1) type(2)
Search for id:(25 2d) interleave(1) type(2)
Search for id:(25 2d) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(25 7b) interleave(1) type(1)
Search for id:(bf 57) interleave(1) type(1)
Search for id:(25 7b) interleave(1) type(1)
Search for id:(25 2d) interleave(1) type(2)
Search for id:(25 2d) interleave(1) type(2)
Search for id:(25 2d) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001
i810_rng: RNG not detected
hw_random: RNG not detected
usb.c: registered new driver usblp
printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x043D pid 0x0057
printer.c: v0.13: USB Printer Device Class driver
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
usbserial.c: USB Serial support registered for PL-2303
usbserial.c: PL-2303 converter detected
usbserial.c: PL-2303 converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
pl2303.c: Prolific PL2303 USB to serial adaptor driver v0.10
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
lp0: using parport0 (polling).
NET4: AppleTalk 0.18a for Linux NET4.0
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
[drm] AGP 0.99 Aperture @ 0xe0000000 64MB
[drm] Initialized radeon 1.7.0 20020828 on minor 0
[drm] Loading R200 Microcode
i810_audio: drain_dac, dma timeout?
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered

[estarchak]

usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
usbserial.c: USB Serial support registered for PL-2303
usbserial.c: PL-2303 converter detected
usbserial.c: PL-2303 converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
pl2303.c: Prolific PL2303 USB to serial adaptor driver v0.10

Это не модем? по имени устройства похоже на USB-кабель для моб. телефона. Устройство /dev/ttyUSB0


usb.c: registered new driver usblp
printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x043D pid 0x0057
printer.c: v0.13: USB Printer Device Class driver

p0: using parport0 (polling).
Это принтер.

Ссылка скорее всего /dev/usb/lp0

[REN]

usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
usbserial.c: USB Serial support registered for PL-2303
usbserial.c: PL-2303 converter detected
usbserial.c: PL-2303 converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
pl2303.c: Prolific PL2303 USB to serial adaptor driver v0.10

Это не модем? по имени устройства похоже на USB-кабель для моб. телефона. Устройство /dev/ttyUSB0


usb.c: registered new driver usblp
printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x043D pid 0x0057
printer.c: v0.13: USB Printer Device Class driver

p0: using parport0 (polling).
Это принтер.

Ссылка скорее всего /dev/usb/lp0

Да ты просто волшебник действительно, забыл кабель от телефона выдернуть!

сейчас попробую что нть напечатать.
и на сотик скинуть что нть. надо только с прогой этой разобраться...

[IvanAxe]

На будущее --- пользуйся грепом. dmesg | grep -i usb --- и тебе придется разгребать гораздо меньше всякого не относящегося к теме

[REN]

На будущее --- пользуйся грепом. dmesg | grep -i usb --- и тебе придется разгребать гораздо меньше всякого не относящегося к теме

Спасибо, с ЮСБ разобрался. Но ни принтер ни Kandy не пашут
На принтер Lexmark Z25 нашел драйвер, вернее он для Z35, но как я понял отсюда, должон подойти. Ан не подходит...

Телефон у меня M65. Девайс указал как estarchak сказал.