Трабл с загрузкой SuSE 10.0 (помогите плз)

[Jung_NW]

груб загружается, если выбирать SuSE Linux 10.0 появляется чёрный экран, пустой обсолютно... и всё
загружается только Filesafe
в чём может быть проблема?
сие началось после установки вм тваря.. (5.5.1)
поставил на тварь винду, перезагрузил комп. и всё...

[n2j2r]

а в логах что?

[Jung_NW]

в каких конкретно?
укажи путь до них, я незнаю где они...

[Computer.Pers]

Вроде смотреть тут:

Код: Выделить всё

#cat /var/log/boot.msg

[Jung_NW]

#cat /var/log/boot.msg :

Код: Выделить всё

Inspecting /boot/System.map-2.6.13-15.8-smp
Loaded 24964 symbols from /boot/System.map-2.6.13-15.8-smp.
Symbols match kernel version 2.6.13.
No module symbols loaded - kernel modules not enabled.

klogd 1.4.1, log source = ksyslog started.
<5>Linux version 2.6.13-15.8-smp (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 SMP Tue Feb 7 11:07:24 UTC 2006
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000007ff30000 (usable)
<4> BIOS-e820: 000000007ff30000 - 000000007ff40000 (ACPI data)
<4> BIOS-e820: 000000007ff40000 - 000000007fff0000 (ACPI NVS)
<4> BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
<4> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
<5>1151MB HIGHMEM available.
<5>896MB LOWMEM available.
<6>found SMP MP-table at 000ff780
<7>On node 0 totalpages: 524080
<7>  DMA zone: 4096 pages, LIFO batch:1
<7>  Normal zone: 225280 pages, LIFO batch:31
<7>  HighMem zone: 294704 pages, LIFO batch:31
<6>DMI 2.3 present.
<6>Using APIC driver default
<6>Intel MultiProcessor Specification v1.4
<6>    Virtual Wire compatibility mode.
<6>OEM ID: ASUSTek  Product ID:  APIC at: 0xFEE00000
<4>Processor #0 15:3 APIC version 20
<4>WARNING: maxcpus limit of 0 reached. Processor ignored.
<6>I/O APIC #2 Version 32 at 0xFEC00000.
<4>Enabling APIC mode:  Flat.  Using 1 I/O APICs
<3>SMP mptable: no processors registered!
<3>BIOS bug, MP table errors detected!...
<3>... disabling SMP support. (tell your hw vendor)
<4>Allocating PCI resources starting at 80000000 (gap: 80000000:7fb80000)
<4>Built 1 zonelists
<5>Kernel command line: root=/dev/hda6 vga=normal ide=nodma apm=off acpi=off noresume selinux=0 nosmp noapic maxcpus=0 edd=off 3
<4>Found and enabled local APIC!
<6>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 65536 bytes)
<4>Detected 2998.841 MHz processor.
<6>Using tsc for high-res timesource
<4>Console: colour VGA+ 80x25
<4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 2071192k/2096320k available (2331k kernel code, 23864k reserved, 749k data, 252k init, 1178816k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<4>Calibrating delay using timer specific routine.. 6005.98 BogoMIPS (lpj=12011975)
<6>Security Framework v1.0.0 initialized
<6>SELinux:  Disabled at boot.
<4>Mount-cache hash table entries: 512
<7>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000041d 00000000 00000000
<7>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000041d 00000000 00000000
<4>monitor/mwait feature present.
<4>using mwait in idle threads.
<6>CPU: Trace cache: 12K uops, L1 D cache: 16K
<6>CPU: L2 cache: 1024K
<6>CPU: Physical Processor ID: 0
<7>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 0000041d 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<6>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
<6>CPU0: Thermal monitoring enabled
<6>mtrr: v2.0 (20020519)
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 1775k freed
<4>CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
<5>SMP motherboard not detected.
<6>Brought up 1 CPUs
<6>NET: Registered protocol family 16
<6>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
<6>PCI: Using configuration type 1
<6>ACPI: Subsystem revision 20050408
<6>ACPI: Interpreter disabled.
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI: disabled
<4>PCI: Probing PCI hardware
<4>PCI: Probing PCI hardware (bus 00)
<4>EHCI early BIOS handoff failed (BIOS bug ?)
<6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
<7>Boot video device is 0000:01:00.0
<6>PCI: Transparent bridge - 0000:00:1e.0
<6>PCI: Using IRQ router PIIX/ICH [8086/24d0] at 0000:00:1f.0
<4>PCI: IRQ 0 for device 0000:00:1f.1 doesn't match PIRQ mask - try pci=usepirqmask
<6>PCI: Found IRQ 5 for device 0000:00:1f.1
<6>PCI: Sharing IRQ 5 with 0000:00:1d.2
<6>PCI: Sharing IRQ 5 with 0000:00:1f.2
<6>PCI: Sharing IRQ 5 with 0000:02:01.0
<4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
<6>PCI: Bridge: 0000:00:01.0
<6>  IO window: disabled.
<6>  MEM window: fc800000-fe8fffff
<6>  PREFETCH window: dff00000-efefffff
<6>PCI: Bridge: 0000:00:03.0
<6>  IO window: c000-cfff
<6>  MEM window: fe900000-fe9fffff
<6>  PREFETCH window: disabled.
<6>PCI: Bridge: 0000:00:1e.0
<6>  IO window: d000-dfff
<6>  MEM window: fea00000-feafffff
<6>  PREFETCH window: 80000000-800fffff
<7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
<5>apm: disabled on user request.
<6>audit: initializing netlink socket (disabled)
<4>audit(1140894033.396:1): initialized
<4>highmem bounce pool size: 64 pages
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>Initializing Cryptographic API
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12
<6>PNP: No PS/2 controller found. Probing ports directly.
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker
<6>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: bitmap version 3.38
<6>NET: Registered protocol family 2
<6>input: AT Translated Set 2 keyboard on isa0060/serio0
<4>IP route cache hash table entries: 131072 (order: 7, 524288 bytes)
<4>TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
<4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>TCP: Hash tables configured (established 524288 bind 65536)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<4>Using IPI No-Shortcut mode
<6>Freeing unused kernel memory: 252k freed
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<5>SCSI subsystem initialized
<6>ICH5: IDE controller at PCI slot 0000:00:1f.1
<4>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
<6>PCI: Found IRQ 5 for device 0000:00:1f.1
<6>PCI: Sharing IRQ 5 with 0000:00:1d.2
<6>PCI: Sharing IRQ 5 with 0000:00:1f.2
<6>PCI: Sharing IRQ 5 with 0000:02:01.0
<6>ICH5: chipset revision 2
<6>ICH5: not 100% native mode: will probe irqs later
<6>    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
<6>    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
<7>Probing IDE interface ide0...
<4>hda: Maxtor 6Y120P0, ATA DISK drive
<4>hdb: SONY DVD RW DRU-700A, ATAPI CD/DVD-ROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<6>hda: max request size: 128KiB
<6>hda: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(100)
<6>hda: cache flushes supported
<6> hda: hda1 hda2 hda3 < hda5 hda6 >
<7>Probing IDE interface ide1...
<6>input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
<7>libata version 1.12 loaded.
<7>sata_promise version 1.02
<6>PCI: Found IRQ 11 for device 0000:03:04.0
<6>PCI: Sharing IRQ 11 with 0000:00:1d.7
<6>PCI: Sharing IRQ 11 with 0000:03:0b.0
<6>ata1: SATA max UDMA/133 cmd 0xF880E200 ctl 0xF880E238 bmdma 0x0 irq 11
<6>ata2: SATA max UDMA/133 cmd 0xF880E280 ctl 0xF880E2B8 bmdma 0x0 irq 11
<6>ata1: no device found (phy stat 00000000)
<6>scsi0 : sata_promise
<6>ata2: no device found (phy stat 00000000)
<6>scsi1 : sata_promise
<7>ata_piix version 1.04
<6>PCI: Found IRQ 5 for device 0000:00:1f.2
<6>PCI: Sharing IRQ 5 with 0000:00:1d.2
<6>PCI: Sharing IRQ 5 with 0000:00:1f.1
<6>PCI: Sharing IRQ 5 with 0000:02:01.0
<7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
<6>ata3: SATA max UDMA/133 cmd 0xEFE0 ctl 0xEFAE bmdma 0xEF60 irq 5
<6>ata4: SATA max UDMA/133 cmd 0xEFA0 ctl 0xEFAA bmdma 0xEF68 irq 5
<7>ata3: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f
<6>ata3: dev 0 ATA, max UDMA/133, 312581808 sectors: lba48
<6>ata3: dev 0 configured for UDMA/133
<6>scsi2 : ata_piix
<7>ata4: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f
<6>ata4: dev 0 ATA, max UDMA/133, 312581808 sectors: lba48
<6>ata4: dev 0 configured for UDMA/133
<6>scsi3 : ata_piix
<5>  Vendor: ATA       Model: ST3160023AS       Rev: 3.18
<5>  Type:   Direct-Access                      ANSI SCSI revision: 05
<5>SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
<5>SCSI device sda: drive cache: write back
<5>SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
<5>SCSI device sda: drive cache: write back
<6> sda: sda1 sda2
<5>Attached scsi disk sda at scsi2, channel 0, id 0, lun 0
<5>  Vendor: ATA       Model: ST3160023AS       Rev: 3.18
<5>  Type:   Direct-Access                      ANSI SCSI revision: 05
<5>SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
<5>SCSI device sdb: drive cache: write back
<5>SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
<5>SCSI device sdb: drive cache: write back
<6> sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 >
<5>Attached scsi disk sdb at scsi3, channel 0, id 0, lun 0
<5>Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0,  type 0
<5>Attached scsi generic sg1 at scsi3, channel 0, id 0, lun 0,  type 0
<5>ReiserFS: hda6: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hda6: using ordered data mode
<5>ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hda6: checking transaction log (hda6)
<5>ReiserFS: hda6: Using r5 hash to sort names
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
<6>NTFS driver 2.1.23 [Flags: R/W MODULE].
<6>NTFS volume version 3.1.
<6>NTFS volume version 3.1.
<6>NTFS volume version 3.1.
<6>NTFS volume version 3.1.
<6>NTFS volume version 3.1.
<6>NTFS volume version 3.1.
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Sat Feb 25 22:00:46 2006

Configuring serial ports...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
doneMounting shared memory FS on /dev/shmdone
Activating device mapper...
Creating /dev/mapper/control character device with major:10 minor:63.
done
Checking file systems...
fsck 1.38 (30-Jun-2005)
doneSetting up kernel module dependencies (if required)done
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
tmpfs on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hda1 on /windows/C type ntfs (ro,noexec,nosuid,nodev,gid=100,umask=0002,nls=utf8)
/dev/hda2 on /windows/D type ntfs (ro,noexec,nosuid,nodev,gid=100,umask=0002,nls=utf8)
/dev/sda1 on /windows/E type ntfs (ro,noexec,nosuid,nodev,gid=100,umask=0002,nls=utf8)
/dev/sda2 on /windows/F type ntfs (ro,noexec,nosuid,nodev,gid=100,umask=0002,nls=utf8)
/dev/sdb1 on /windows/G type ntfs (ro,noexec,nosuid,nodev,gid=100,umask=0002,nls=utf8)
/dev/sdb2 on /windows/H type ntfs (ro,noexec,nosuid,nodev,gid=100,umask=0002,nls=utf8)
doneSetting up the CMOS clockdone
<notice>startproc: execve (/sbin/udevd) [ /sbin/udevd --daemon --stop-exec-queue ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 UDEVD_EVENT_TIMEOUT=1 LC_ALL=POSIX UDEVD_EXPECTED_SEQNUM=761 INIT_VERSION=sysvinit-2.85 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=normal DO_CONFIRM= RUNLEVEL=S PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 HOME=/ SHLVL=2 SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/sbin/udevd ]
Starting udevd done
Loading required kernel modules
doneSetting up hostname 'Server'done
Setting up loopback interface     lo
    lo        IP address: 127.0.0.1/8
done
done
Coldplug
Coldplug: cleaning /events hwup: Loading module 'lp'  for device 'printer'
 processing eventsdone
<notice>killproc: kill(1845,29)
Creating /var/log/boot.msg
doneStarting Firewall Initialization (phase 1 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
done
done
Restore device permissionsdone
Activating remaining swap-devices in /etc/fstab...
doneSetting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
done
Enabling syn flood protectiondone
Disabling IP forwardingdone
Disabling IPv6 forwardingdone
Disabling IPv6 privacydone
done
System Boot Control: The system has been set up
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(1845,3)

INIT: Entering runlevel: 3


<notice>checkproc: /sbin/udevd 4032<notice>checkproc: /sbin/udevd
Boot logging started on /dev/tty1(/dev/console) at Sat Feb 25 19:00:59 2006

Master Resource Control: previous runlevel: N, switching to runlevel: 3
 3873<notice>checkproc: /sbin/udevd  3524<notice>checkproc: /sbin/udevd  2098
<notice>startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 HOME=/ SHLVL=2 SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ]
Starting D-BUS daemondone
Initializing random number generatordone
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 HOME=/ SHLVL=2 SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
Starting resource managerdone
Setting up network interfaces:
    lo
    lo        IP address: 127.0.0.1/8
done    eth0      device: Intel Corporation 82547EI Gigabit Ethernet Controller (LOM)
    eth0      configuration: eth-id-00:11:2f:50:6d:f2
    eth0      IP address: 192.168.11.45/24
done    eth1      device: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
    eth1      No configuration found for eth1
unused    dsl0
    dsl0      Startmode is 'manual'
skippedSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .done
<notice>startproc: execve (/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f /etc/nss_mdns.conf -b ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 HOME=/ SHLVL=2 SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/mdnsd ]
mDNSResponder (Engineering Build) (Sep  9 2005 15:59:08) [4585]: starting

Starting mdnsddone
<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 HOME=/ SHLVL=2 SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 HOME=/ SHLVL=2 SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/sbin/klogd ]
Starting syslog servicesdone
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 HOME=/ SHLVL=2 SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/sbin/portmap ]
<notice>startproc: execve (/opt/gnome/bin/netdaemon) [ /opt/gnome/bin/netdaemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 HOME=/ SHLVL=2 SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/opt/gnome/bin/netdaemon ]
Starting RPC portmap daemondone
Importing Net File System (NFS)unused
acpid: no ACPI support in kernelskipped
Mount SMB/ CIFS File Systems unused
Starting the netdaemondone
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 HOME=/ SHLVL=2 SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
Starting cupsddone
Checking/updating CPU microcodedone
Starting nfsboot (sm-notify) done
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 HOME=/ SHLVL=2 SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
Starting Name Service Cache Daemondone
Starting mail service (Postfix)done
Loading keymap qwerty/ru1.map.gz
doneLoading compose table winkeys shiftctrl latin1.adddone
Start Unicode mode
doneLoading console font Cyr_a8x16.psfu  -m trivial G0:loadable
done<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 HOME=/ SHLVL=2 SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting CRON daemondone
<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes --retain-privileges ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 HOME=/ SHLVL=2 SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
Starting HAL daemondone
<notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 HOME=/ SHLVL=2 SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 HOME=/ SHLVL=2 SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting SMPPPDdone
Starting SSH daemondone
xend skipped
Starting VMware services:
   Virtual machine monitor done
   Virtual ethernet done
   Bridged networking on /dev/vmnet0 done
   Host-only networking on /dev/vmnet1 (background) done
   Host-only networking on /dev/vmnet8 (background) done
   NAT service on /dev/vmnet8 done
Starting powersaved <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -v 3 ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 HOME=/ SHLVL=2 SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/powersaved ]
done
Starting IAL daemon<notice>startproc: execve (/usr/sbin/iald) [ /usr/sbin/iald ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 HOME=/ SHLVL=2 SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/iald ]
done
Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
done
Master Resource Control: runlevel 3 has been reached
Skipped services in runlevel 3: smbfs nfs acpid splash xend
<notice>killproc: kill(4208,3)

[Loky]

груб загружается, если выбирать SuSE Linux 10.0 появляется чёрный экран, пустой обсолютно... и всё
загружается только Filesafe
в чём может быть проблема?
сие началось после установки вм тваря.. (5.5.1)
поставил на тварь винду, перезагрузил комп. и всё...

Опиши как устанавливал vmware.

[n2j2r]

походу в логах только failsafe (?)

[Jung_NW]

груб загружается, если выбирать SuSE Linux 10.0 появляется чёрный экран, пустой обсолютно... и всё
загружается только Filesafe
в чём может быть проблема?
сие началось после установки вм тваря.. (5.5.1)
поставил на тварь винду, перезагрузил комп. и всё...

Опиши как устанавливал vmware.

скачал рпм с офф сайта
rpm -Uhv vmware-.............rpm
поставил
запустил vmware-config.pl
ответил на вопросы
готово..

походу в логах только failsafe (?)

наверно... я точно незнаю