terminated by signal 16 (failed)

[byff]

http://pptpclient.sourceforge.net/howto-fedora-core-4.phtml
все сделал вот теперь в pptpconfig выдает

Using interface ppp0pptpconfig: monitoring interface ppp0

Connect: ppp0 <--> /dev/pts/3
Modem hangup
Connection terminated.
pptpconfig: pppd process terminated by signal 16 (failed)
pptpconfig: SIGUSR1

что это?

[Angel_13th]

byff
man pppd.

[byff]

не могу тама найти (

[Juliette]

EXIT STATUS
...16
The link was terminated by the modem hanging up.

но опять же это ни о чём не говорит, почему именно он произошёл, надо полностью лог смотреть

[byff]

а где его найти?

[byff]

pptpconfig: debug information dump begins
WARNING: security sensitive information follows
pptpconfig 1.2 2004/06/19 08:57:15
# pppd --version
pppd version 2.4.2
# uname -a
Linux 10-4bb5-164b.0-24.a554.11.rt.user.ru 2.6.11-1.1369_FC4 #1 Thu Jun 2 22:55:56 EDT 2005 i686 i686 i386 GNU/Linux
# grep mppe /proc/modules
# modinfo ppp_mppe
filename: /lib/modules/2.6.11-1.1369_FC4/kernel/drivers/net/ppp_mppe.ko
license: Dual BSD/GPL
vermagic: 2.6.11-1.1369_FC4 686 REGPARM 4KSTACKS gcc-4.0
depends: ppp_generic
srcversion: EECDBE936BE7ADD483BBB6F
Array
(
[name] => msm
[server] => AS
[domain] =>
[username] => 611891
[password] => (hidden by pptpconfig)
[pppd-options] =>
[pptp-options] =>
[resolv] =>
[dns-options] =>
[routing] => routing_client_to_lan
[usepeerdns] => 1
[require-mppe] => 1
[nomppe-40] =>
[nomppe-128] =>
[refuse-eap] => 1
[mppe-stateful] =>
[autostart] =>
[iconify] =>
[persist] =>
[debug] => 1
[client-to-lan] =>
)
# route -n (before pppd)
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.0.11.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
0.0.0.0 10.0.11.254 0.0.0.0 UG 0 0 0 eth0
pptpconfig: debug information dump ends, starting pppd
pppd options in effect:
debug # (from /etc/ppp/peers/msm)
updetach # (from command line)
logfd 1 # (from command line)
linkname msm # (from /etc/ppp/peers/msm)
dump # (from /etc/ppp/peers/msm)
noauth # (from /etc/ppp/options.pptp)
refuse-chap # (from /etc/ppp/options.pptp)
refuse-mschap # (from /etc/ppp/options.pptp)
refuse-eap # (from /etc/ppp/options.pptp)
name 611891 # (from /etc/ppp/peers/msm)
remotename msm # (from /etc/ppp/peers/msm)
# (from /etc/ppp/options.pptp)
pty pptp AS --nolaunchpppd # (from /etc/ppp/peers/msm)
ipparam msm # (from /etc/ppp/peers/msm)
usepeerdns # (from /etc/ppp/peers/msm)
nobsdcomp # (from /etc/ppp/options.pptp)
nodeflate # (from /etc/ppp/options.pptp)
require-mppe # (from /etc/ppp/peers/msm)
using channel 1
Using interface ppp0pptpconfig: monitoring interface ppp0

Connect: ppp0 <--> /dev/pts/3
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x540e12f4> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <mru 1460> <auth chap MD5> <magic 0x7c07e7ed>]
sent [LCP ConfNak id=0x1 <auth chap MS-v2>]
rcvd [LCP ConfReq id=0x2 <mru 1460> <auth chap MD5> <magic 0x7c07e7ed>]
sent [LCP ConfNak id=0x2 <auth chap MS-v2>]
rcvd [LCP ConfReq id=0x3 <mru 1460> <auth chap MD5> <magic 0x7c07e7ed>]
sent [LCP ConfNak id=0x3 <auth chap MS-v2>]
rcvd [LCP ConfReq id=0x4 <mru 1460> <auth chap MD5> <magic 0x7c07e7ed>]
sent [LCP ConfNak id=0x4 <auth chap MS-v2>]
rcvd [LCP ConfReq id=0x5 <mru 1460> <auth chap MD5> <magic 0x7c07e7ed>]
sent [LCP ConfNak id=0x5 <auth chap MS-v2>]
rcvd [LCP ConfReq id=0x6 <mru 1460> <auth chap MD5> <magic 0x7c07e7ed>]
sent [LCP ConfRej id=0x6 <auth chap MD5>]
rcvd [LCP ConfReq id=0x7 <mru 1460> <auth chap MD5> <magic 0x7c07e7ed>]
sent [LCP ConfRej id=0x7 <auth chap MD5>]
rcvd [LCP ConfReq id=0x8 <mru 1460> <auth chap MD5> <magic 0x7c07e7ed>]
sent [LCP ConfRej id=0x8 <auth chap MD5>]
rcvd [LCP ConfReq id=0x9 <mru 1460> <auth chap MD5> <magic 0x7c07e7ed>]
sent [LCP ConfRej id=0x9 <auth chap MD5>]
rcvd [LCP ConfReq id=0xa <mru 1460> <auth chap MD5> <magic 0x7c07e7ed>]
sent [LCP ConfRej id=0xa <auth chap MD5>]
rcvd [LCP ConfReq id=0xb <mru 1460> <auth chap MD5> <magic 0x7c07e7ed>]
sent [LCP ConfRej id=0xb <auth chap MD5>]
rcvd [LCP ConfReq id=0xc <mru 1460> <auth chap MD5> <magic 0x7c07e7ed>]
sent [LCP ConfRej id=0xc <auth chap MD5>]
rcvd [LCP ConfReq id=0xd <mru 1460> <auth chap MD5> <magic 0x7c07e7ed>]
sent [LCP ConfRej id=0xd <auth chap MD5>]
rcvd [LCP ConfReq id=0xe <mru 1460> <auth chap MD5> <magic 0x7c07e7ed>]
sent [LCP ConfRej id=0xe <auth chap MD5>]
rcvd [LCP ConfReq id=0xf <mru 1460> <auth chap MD5> <magic 0x7c07e7ed>]
sent [LCP ConfRej id=0xf <auth chap MD5>]
Script pptp AS --nolaunchpppd finished (pid 3170), status = 0x0
Modem hangup
Connection terminated.
# route -n (after pppd exit)
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.0.11.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
0.0.0.0 10.0.11.254 0.0.0.0 UG 0 0 0 eth0
pptpconfig: pppd process terminated by signal 16 (failed)
pptpconfig: SIGUSR1
# route -n (after completion)
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.0.11.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
0.0.0.0 10.0.11.254 0.0.0.0 UG 0 0 0 eth0

[Juliette]

я в общем далеко не спец, но на первый взгляд чего видно, вот эти строчки:

Код: Выделить всё

rcvd [LCP ConfReq id=0x1 <mru 1460>  ]
sent [LCP ConfNak id=0x1 <auth chap MS-v2>]
sent [LCP ConfRej id=0x6 <auth chap MD5>]
rcvd [LCP ConfReq id=0x7 <mru 1460>  ]

то есть, вроде как серверу надо chap MD5, а ты шлёшь chap MS-v2, попробуй в опции ppp поставить
require-mschap-v2 и mru 1460
но вполне может быть, что это мелочи, обычно проблемы с роутингом, я в нём не шарю, может ещё кто-нить чего скажет, ну и сам прошвырнись там по диагностике, там всё очень подробно
здесь удобочитаемый ман ppp