USB 2.0 на VMWare (host-Linux(Gentoo), guest-WinXP) (У кого-нибудь работает?)

Софт под Linux, разные программы, но только связанные с Linux

Модератор: /dev/random

Каменьщик
Сообщения: 189

USB 2.0 на VMWare (host-Linux(Gentoo), guest-WinXP)

Сообщение Каменьщик »

Возможно ли?

У меня c usb 2.0 устройствами проблема.

при втыкании кабеля ХР грит о подключении к низко-скоростному порту.

И дальше ещё проблемы с установкой дров устройства (сканера) идут
AMD Athlon XP, 1800 MHz (13.5 x 133) 2200+
Gigabyte GA-7VA (VIA VT8377 Apollo KT400; Realtek ALC650 @ VIA AC'97 Enhanced Audio Controller)
NVIDIA Geforce4 MX 440 AGP8X NV18 Chip Rev A2

Да, я именно Каменьщик, ибо нас каменщиков много.
{23.04.06: аккаунт покинут создателем и не используется более}
Спасибо сказали:
Аватара пользователя
Mr.Anderson
Сообщения: 114

Re: USB 2.0 на VMWare (host-Linux(Gentoo), guest-WinXP)

Сообщение Mr.Anderson »

у мну мп3-плеер замечательно гоняет USB-2.0 под XP на vmWare 5...а твой пингвин USB-2.0 вообще нормально глотает?
LMD / DML
Спасибо сказали:
Каменьщик
Сообщения: 189

Re: USB 2.0 на VMWare (host-Linux(Gentoo), guest-WinXP)

Сообщение Каменьщик »

Mr.Anderson, спасибо тебе за ответ, он вселяет надежду.

Раз USB 2.0 в vmware работает, то рассмотрим подробности проблемы.

При подключении сканера выскакивает поплавок на счёт низкой скорости usb порта.
Попытка(ки) поставить дрова заканчиваются BSOD'oм.
Далее выскакивает вот такое уведомнление:

VMware Workstation unrecoverable error: (vmx)
ASSERT /build/mts/release/bora-13124/bora/devices/usb/vusb.c:2564 bugNr=12248
A log file is available in "~/vmware/Windows-XP-Professional/vmware.log". Please request support and include the contents of the log file.
To collect files to submit to VMware support, run vm-support.
We will respond on the basis of your support entitlement.


В упомянутом логе (~/vmware/Windows-XP-Professional/vmware.log) находим:

Код:

Apr 07 13:18:23: vmx| VMXVmdbLoadUsbDevices: New set of 1 USB devices Apr 07 13:18:36: mks| MKS lost grab Apr 07 13:20:19: vmx| Msg_Hint: msg.usb.generic.stopDevice (shown) Apr 07 13:20:23: vmx| USB: Connecting device 0xe001001204b8011f Apr 07 13:20:23: vmx| VMXVmdbLoadUsbDevices: New set of 1 USB devices Apr 07 13:21:29: vmx| UHCI: Invalid link pointer 7E007D0, UHCI halted Apr 07 13:21:29: vcpu-0| VNET: Notification enabled for Ethernet0 Apr 07 13:21:30: vcpu-0| vmcore/vmm/main/busmem.c: Tracing invalid page, ttype 0 (count 0) Apr 07 13:21:30: vcpu-0| SVGA: Unregistering IOSpace at 0x1420 (0x1420) Apr 07 13:21:30: vcpu-0| SVGA: Unregistering MemSpace at 0xf0000000(0xf0000000) and 0xfe000000(0xfe000000) Apr 07 13:21:30: vcpu-0| SVGA: Registering MemSpace at 0xf0000000(0xf0000000) and 0xe8000000(0xfe000000) Apr 07 13:21:30: vcpu-0| PCI OPROM: Asked to map the VBIOS OPROM at 0xfe800000 (size 32768 bytes) Apr 07 13:21:30: vcpu-0| PCI OPROM: Asked to unmap the VBIOS OPROM Apr 07 13:21:30: vcpu-0| SVGA: Unregistering MemSpace at 0xf0000000(0xf0000000) and 0xe8000000(0xe8000000) Apr 07 13:21:30: vcpu-0| PCI OPROM: Asked to map the SBIOS OPROM at 0xfe800000 (size 16384 bytes) Apr 07 13:21:30: vcpu-0| PCI OPROM: Asked to unmap the SBIOS OPROM Apr 07 13:21:30: vcpu-0| PCI OPROM: Asked to map the VLANCE OPROM at 0xfe800000 (size 65536 bytes) Apr 07 13:21:30: vcpu-0| PCI OPROM: Asked to unmap the VLANCE OPROM Apr 07 13:21:30: vcpu-0| SVGA: Registering MemSpace at 0xf0000000(0xf0000000) and 0xe8000000(0xe8000000) Apr 07 13:21:30: vcpu-0| PCI OPROM: Asked to map the VBIOS OPROM at 0xfe800000 (size 32768 bytes) Apr 07 13:21:30: vcpu-0| PCI OPROM: Asked to unmap the VBIOS OPROM Apr 07 13:21:30: vcpu-0| SVGA: Unregistering MemSpace at 0xf0000000(0xf0000000) and 0xe8000000(0xe8000000) Apr 07 13:21:30: vcpu-0| SVGA: Registering IOSpace at 0x1420 (0x0) Apr 07 13:21:30: vcpu-0| SVGA: Registering MemSpace at 0xf0000000(0xf0000000) and 0xe8000000(0xe8000000) Apr 07 13:21:31: vcpu-0| UHCI: Global Reset Apr 07 13:21:31: vcpu-0| UHCI: HCReset Apr 07 13:21:31: vcpu-0| UHCI: HCReset Apr 07 13:21:33: mks| MKS lost grab Apr 07 13:21:33: vmx| ASSERT /build/mts/release/bora-13124/bora/devices/usb/vusb.c:2564 bugNr=12248 Apr 07 13:21:33: vmx| Backtrace: Apr 07 13:21:33: vmx| Backtrace[0] 0xbfc39518 eip 0x80598c3 Apr 07 13:21:33: vmx| Backtrace[1] 0xbfc39538 eip 0x8103da8 Apr 07 13:21:33: vmx| Backtrace[2] 0xbfc39578 eip 0x8102f57 Apr 07 13:21:33: vmx| Backtrace[3] 0xbfc395c8 eip 0x8108d64 Apr 07 13:21:33: vmx| Backtrace[4] 0xbfc39618 eip 0x8109fca Apr 07 13:21:33: vmx| Backtrace[5] 0xbfc39638 eip 0x810a33d Apr 07 13:21:33: vmx| Backtrace[6] 0xbfc39688 eip 0x8108918 Apr 07 13:21:33: vmx| Backtrace[7] 0xbfc396a8 eip 0x810358e Apr 07 13:21:33: vmx| Backtrace[8] 0xbfc396d8 eip 0x81035d5 Apr 07 13:21:33: vmx| Backtrace[9] 0xbfc396f8 eip 0x8219689 Apr 07 13:21:33: vmx| Backtrace[10] 0xbfc39758 eip 0x8218f1a Apr 07 13:21:33: vmx| Backtrace[11] 0xbfc397a8 eip 0x821888c Apr 07 13:21:33: vmx| Backtrace[12] 0xbfc397c8 eip 0x82187a9 Apr 07 13:21:33: vmx| Backtrace[13] 0xbfc397e8 eip 0x805a121 Apr 07 13:21:33: vmx| Backtrace[14] 0xbfc39808 eip 0x805a0a2 Apr 07 13:21:33: vmx| Backtrace[15] 0xbfc39838 eip 0x8058e3d Apr 07 13:21:33: vmx| Backtrace[16] 0xbfc39888 eip 0x804fc92 Apr 07 13:21:33: vmx| Backtrace[17] 0xbfc398b8 eip 0x804eabc Apr 07 13:21:33: vmx| Backtrace[18] 0xbfc39918 eip 0xb7c370da Apr 07 13:21:33: vmx| Backtrace[19] 00000000 eip 0x804dc21 Apr 07 13:21:33: vmx| Core dump limit is 0 kb. Apr 07 13:21:34: vmx| Attempting to dump core... Apr 07 13:21:34: vmx| Child process 16178 failed to dump core (status 0x6). Apr 07 13:21:34: vmx| Msg_Post: Error Apr 07 13:21:34: vmx| [msg.log.error.unrecoverable] VMware Workstation unrecoverable error: (vmx) Apr 07 13:21:34: vmx| ASSERT /build/mts/release/bora-13124/bora/devices/usb/vusb.c:2564 bugNr=12248 Apr 07 13:21:34: vmx| [msg.panic.haveLog] A log file is available in "/home/gtlinux/vmware/Windows-XP-Professional/vmware.log". [msg.panic.requestSupport.withLog] Please request support and include the contents of the log file. [msg.panic.requestSupport.linux] Apr 07 13:21:34: vmx| To collect files to submit to VMware support, run vm-support. Apr 07 13:21:34: vmx| [msg.panic.response] We will respond on the basis of your support entitlement. Apr 07 13:21:34: vmx| ---------------------------------------- Apr 07 13:23:09: vmx| VTHREAD thread 0 start exiting Apr 07 13:23:09: vmx| VTHREAD thread 0 exiting, 7 left Apr 07 13:23:09: mks| VTHREAD watched thread 0 "vmx" died Apr 07 13:23:09: mks| VTHREAD thread 1 start exiting Apr 07 13:23:09: IO#2| VTHREAD watched thread 0 "vmx" died Apr 07 13:23:09: IO#2| VTHREAD thread 7 start exiting Apr 07 13:23:09: IO#2| VTHREAD thread 7 exiting, 6 left Apr 07 13:23:09: IO#4| VTHREAD watched thread 0 "vmx" died Apr 07 13:23:09: IO#4| VTHREAD thread 9 start exiting Apr 07 13:23:09: IO#4| VTHREAD thread 9 exiting, 5 left Apr 07 13:23:09: IO#3| VTHREAD watched thread 0 "vmx" died Apr 07 13:23:09: IO#3| VTHREAD thread 8 start exiting Apr 07 13:23:09: IO#3| VTHREAD thread 8 exiting, 4 left Apr 07 13:23:09: IO#1| VTHREAD watched thread 0 "vmx" died Apr 07 13:23:09: IO#1| VTHREAD thread 6 start exiting Apr 07 13:23:09: IO#1| VTHREAD thread 6 exiting, 3 left Apr 07 13:23:09: IO#0| VTHREAD watched thread 0 "vmx" died Apr 07 13:23:09: IO#0| VTHREAD thread 5 start exiting Apr 07 13:23:09: IO#0| VTHREAD thread 5 exiting, 2 left Apr 07 13:23:09: mks| VTHREAD thread 1 exiting, 1 left Apr 07 13:23:19: vcpu-0| VTHREAD watched thread 0 "vmx" died Apr 07 13:23:19: vcpu-0| VTHREAD thread 4 start exiting Apr 07 13:23:19: vcpu-0| VTHREAD thread 4 exiting, 0 left


dmesg дает следующую инфу:

Код: Выделить всё

/dev/vmnet: open called by PID 15121 (vmware-vmx)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmmon[15128]: host clock rate change request 0 -> 19
/dev/vmmon[15128]: host clock rate change request 19 -> 83
/dev/vmnet: open called by PID 15128 (vmware-vmx)
/dev/vmnet: port on hub 1 successfully opened
hub 1-0:1.0: state 5 ports 6 chg 0000 evt 0008
ehci_hcd 0000:00:10.3: GetStatus port 3 status 001803 POWER sig=j  CSC CONNECT
hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:10.3: port 3 high speed
ehci_hcd 0000:00:10.3: GetStatus port 3 status 001005 POWER sig=se0  PE CONNECT
usb 1-3: new high speed USB device using ehci_hcd and address 18
ehci_hcd 0000:00:10.3: port 3 high speed
ehci_hcd 0000:00:10.3: GetStatus port 3 status 001005 POWER sig=se0  PE CONNECT
usb 1-3: default language 0x0409
usb 1-3: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: EPSON Scanner
usb 1-3: Manufacturer: EPSON
usb 1-3: hotplug
usb 1-3: adding 1-3:1.0 (config #1, interface 0)
usb 1-3:1.0: hotplug
/dev/vmnet: open called by PID 15128 (vmware-vmx)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmmon[15128]: host clock rate change request 83 -> 19
/dev/vmmon[15128]: host clock rate change request 19 -> 1
/dev/vmmon[15128]: host clock rate change request 1 -> 19
/dev/vmmon[15128]: host clock rate change request 19 -> 0
vmmon: Had to deallocate locked 30983 pages from vm driver c844a000
vmmon: Had to deallocate AWE 3004 pages from vm driver c844a000
usb 1-3: vmware-vmx timed out on ep0out len=0/0


У кого какие идеи будут?
AMD Athlon XP, 1800 MHz (13.5 x 133) 2200+
Gigabyte GA-7VA (VIA VT8377 Apollo KT400; Realtek ALC650 @ VIA AC'97 Enhanced Audio Controller)
NVIDIA Geforce4 MX 440 AGP8X NV18 Chip Rev A2

Да, я именно Каменьщик, ибо нас каменщиков много.
{23.04.06: аккаунт покинут создателем и не используется более}
Спасибо сказали:
Mellon
Сообщения: 655
Статус: Powered by Gentoo
ОС: Gentoo

Re: USB 2.0 на VMWare (host-Linux(Gentoo), guest-WinXP)

Сообщение Mellon »

Проблема такая же.

Вот что было 3 года назад:
http://www.vmware.com/community/thread.jsp...4347&#14347


Linux c USB2 дружит:

Код:

Bus 001 Device 002: ID 04b8:011f Seiko Epson Corp. Perfection 1670 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 idVendor 0x04b8 Seiko Epson Corp. idProduct 0x011f Perfection 1670 bcdDevice 1.10 iManufacturer 1 EPSON iProduct 2 EPSON Scanner iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 39 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 16 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 bNumConfigurations 1


All, очень прошу, подскажите эмулятор с поддержкой usb2.
Перегружаться каждый раз в винду напряжно
Некоммерческий файлообмен не может сравниваться с кражей, так как кража лишает кого-то возможности использовать украденный объект. ©
--------------------
Переворачиватель пингвинов
Спасибо сказали:
Mellon
Сообщения: 655
Статус: Powered by Gentoo
ОС: Gentoo

Re: USB 2.0 на VMWare (host-Linux(Gentoo), guest-WinXP)

Сообщение Mellon »

Некоммерческий файлообмен не может сравниваться с кражей, так как кража лишает кого-то возможности использовать украденный объект. ©
--------------------
Переворачиватель пингвинов
Спасибо сказали: