Под виндой тюнер ComproPVR+FM все стало и работает (saa7134), апод SUSE 10.0 перелопатил все опции,не знаю уже какую ему - Yast2- надо card и tuner писать? Подключено кабельное тв, в XawTV, TVtime,kdetv, установлен диапазон частот для России, звук в формате PAL-DK,я уже и на форуме нашем нарыл все что можно но сдивигов 0, прошу очень не посылайте а помогите,большое
пивопенное спасибо! rolleyes.gif
Тюнер ComproPVR+FM (Помогите настроить плз !!!)
Модератор: Модераторы разделов
-
Docent
- Сообщения: 216
Re: Тюнер ComproPVR+FM
Он работает через wdm дрова в винде? Я просто где-то в журнале линухформат, видел статью про то как прикрутить тюнер, могу посмотреть но там вроде описывалось вытаскиваение изображения через wdm.
-
static2005
- Сообщения: 74
Re: Тюнер ComproPVR+FM
Посмотрите пожалуйста если моя просьба вас не обременит, буду очень признателен.
MainOs: SuSE 10.0
-
static2005
- Сообщения: 74
Re: Тюнер ComproPVR+FM
Всем добрый вечер. Вот приобрел тв-тюнер ComproPVR+fm на чипе saa7134, под виндой все заработало с полоборота- пульт,звук и изображение,
все отлично, но под линуксом (я юзаю SuSE10) есть проблема: изображение класс но нет звука и пульт не работает, не знаю не могу
определить номер tuner=?,а теперь по порядку: Файлы конфигурации ниже,для просмотра тв использую tvtime (xawtv и kdetv плюются и система
виснет глухо до самаго reset), аудиокабель из тюнера вставлен в лайн ин компа - АС97встроенный,пробовал и в микрофон-настройки звука и
чувствительности микрофона выставлены на максимум, к тюнеру подведен кабель спутникового тв- общий в подъезде, в настройках tvtime
выбран видеорежим PAL- регион China Broadcast из-за лучшего изображения, -Россию пробовал,но тоже нет звука, стандарт звука PAL-DK Mono,
в источнике входа видеосигнала указан Television. Вот и вроде изложил проблему, помогите пожалуйста, я и в гугле рылся и вот все чего
нарыл, может хотябы со звуком поможите, я за пульт уже и не прошу, спасибо- Был рад поделиться очень жду совета - просто рядом некого
спросить,может кто глянет в каком файле чего надо мне подправить?
-----------------------------------------------------------------------------------------------------------------------------------------
по команде dmesg выдает:
Linux version 2.6.13-15-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Sep 13 14:56:15 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
On node 0 totalpages: 65520
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61424 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 IntelR ) @ 0x000f6510
ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000
ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: local apic disabled
Allocating PCI resources starting at 10000000 (gap: 10000000:efb00000)
Built 1 zonelists
Kernel command line: root=/dev/hda7 vga=0x31a selinux=0 resume=/dev/hda6 splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 735.090 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 253904k/262080k available (2028k kernel code, 7516k reserved, 700k data, 204k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1471.43 BogoMIPS (lpj=2942860)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: Intel Pentium III (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 1697k freed
ACPI: Looking for DSDT in initrd... not found!
not found!
ACPI: setting ELCR to 0200 (from 0a20)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb190, last bus=2
PCI: Using configuration type 1
ACPI: Subsystem revision 20050408
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Linux Plug and Play Support v0.97 © Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
pnp: 00:01: ioport range 0x400-0x4bf could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: c000-cfff
MEM window: ec000000-edffffff
PREFETCH window: e0000000-e7ffffff
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: ee000000-ee0fffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:1e.0 to 64
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1147127057.284:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xe0000000, mapped to 0xd0880000, using 10240k, total 32768k
vesafb: mode is 1280x1024x16, linelength=2560, pages=11
vesafb: protected mode interface info at c000:5458
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 112645 bytes,<6>...found (1280x1024, 17839 bytes, v3).
Console: switching to colour frame buffer device 158x59
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
mice: PS/2 mouse device common for all mice
input: PC Speaker
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.38
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Using IPI Shortcut mode
ACPI wakeup devices:
SLPB PCI0 HUB0 USB0 USB1 MODM
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 204k freed
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 5
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: WDC WD2000JB-00GVA0, ATA DISK drive
hdb: SAMSUNG SV2001H, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 1024KiB
hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 >
hdb: max request size: 128KiB
hdb: 39179952 sectors (20060 MB) w/2048KiB Cache, CHS=38869/16/63, UDMA(100)
hdb: cache flushes supported
hdb: hdb1 hdb2 hdb3 < hdb5 > hdb4
Probing IDE interface ide1...
hdc: ASUS CRW-5232AS, ATAPI CD/DVD-ROM drive
hdd: TSSTcorpCD/DVDW TS-H552U, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: CPU0 (power states: C1[C1])
ACPI: Processor [CPU0] (supports 2 throttling states)
hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
ACPI: Thermal Zone [THRM] (41 C)
ACPI: Fan [FAN] (on)
Attempting manual resume
swsusp: Suspend partition has wrong signature?
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver 2.1.23 [Flags: R/W MODULE].
NTFS volume version 3.1.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
lp0: using parport0 (interrupt-driven).
Adding 546168k swap on /dev/hda6. Priority:-1 extents:1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Linux agpgart interface v0.101 © Dave Jones
agpgart: Detected an Intel i815 Chipset.
agpgart: AGP aperture is 64M @ 0xe8000000
hw_random: RNG not detected
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1f.5 to 64
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: UHCI Host Controller
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1f.2: irq 11, io base 0x0000d000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNK1] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci_hcd 0000:00:1f.4: UHCI Host Controller
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1f.4: irq 9, io base 0x0000d800
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-1: new low speed USB device using uhci_hcd and address 2
intel8x0_measure_ac97_clock: measured 54781 usecs
intel8x0: clocking to 48000
Linux video capture interface: v1.00
saa7130/34: v4l2 driver version 0.2.14 loaded
ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
saa7134[0]: found at 0000:02:09.0, rev: 1, irq: 5, latency: 32, mmio: 0xee000000
saa7134[0]: subsystem: 185b:c200, board: Noval Prime TV 7133 [card=34,insmod option]
saa7134[0]: board init: gpio is 4c0001
saa7134[0]: i2c eeprom 00: 5b 18 00 c2 ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
usb 1-2: new full speed USB device using uhci_hcd and address 3
: chip found @ 0xc0 (saa7134[0])
: All bytes are equal. It is not a TEA5767
tuner 1-0060: type set to 9 (Alps HSBH1)
: chip found @ 0xc2 (saa7134[0])
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
usbcore: registered new driver hiddev
hiddev96: USB HID v1.10 Device [American Power Conversion Back-UPS ES 525 FW:851.t2.I USB FW:t2] on usb-0000:00:1f.2-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
NET: Registered protocol family 10
Disabled Privacy Extensions on device c036b920(lo)
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
NET: Registered protocol family 23
IrCOMM protocol (Dag Brattli)
bootsplash: status on console 0 changed to on
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized radeon 1.16.0 20050311 on minor 0:
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
subfs 0.9
tuner 1-0061: tuner type not set
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
subfs: unsuccessful attempt to mount media (256)
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
-----------------------------------------------------------------------------------------------------------------------------------------
по команде lsmod выдает:
Module Size Used by
ppp_deflate 6016 0
zlib_deflate 23960 1 ppp_deflate
bsd_comp 6144 0
ppp_async 10880 1
ppp_generic 28052 7 ppp_deflate,bsd_comp,ppp_async
slhc 7296 1 ppp_generic
hfsplus 75140 0
subfs 7552 1
radeon 75264 1
drm 61844 2 radeon
raw 39456 0
irtty_sir 6016 2
sir_dev 16556 1 irtty_sir
ircomm_tty 23432 0
ircomm 13060 1 ircomm_tty
irda 115000 3 sir_dev,ircomm_tty,ircomm
crc_ccitt 2176 2 ppp_async,irda
snd_pcm_oss 59168 0
snd_mixer_oss 18944 1 snd_pcm_oss
snd_seq 51984 0
snd_seq_device 8588 1 snd_seq
button 7056 0
battery 10244 0
ac 5252 0
ipv6 242752 14
usbhid 43616 2
edd 9824 0
tuner 35112 0
saa7134 109908 0
video_buf 20868 1 saa7134
v4l2_common 5760 1 saa7134
v4l1_compat 13060 1 saa7134
ir_common 8196 1 saa7134
videodev 9088 1 saa7134
uhci_hcd 32016 0
usbcore 112640 5 usbhid,uhci_hcd
snd_intel8x0 33408 0
snd_ac97_codec 90876 1 snd_intel8x0
i2c_i801 8844 0
i2c_core 20368 3 tuner,saa7134,i2c_i801
generic 4484 0 [permanent]
snd_ac97_bus 2432 1 snd_ac97_codec
snd_pcm 93064 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 24452 2 snd_seq,snd_pcm
snd 60420 8 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd
_pcm,snd_timer
soundcore 9184 2 saa7134,snd
snd_page_alloc 10632 2 snd_intel8x0,snd_pcm
intel_agp 22044 1
agpgart 33096 2 drm,intel_agp
shpchp 88676 0
pci_hotplug 26164 1 shpchp
parport_pc 38980 1
lp 11460 0
parport 33864 2 parport_pc,lp
nls_utf8 2048 1
ntfs 182288 1
nls_iso8859_1 4096 3
nls_cp437 5760 3
vfat 12800 3
fat 49692 1 vfat
dm_mod 54972 0
ext3 130440 5
jbd 59940 1 ext3
fan 4996 0
thermal 14472 0
ide_cd 39684 0
cdrom 36896 1 ide_cd
processor 24252 1 thermal
piix 9988 0 [permanent]
ide_disk 17152 12
ide_core 122380 4 generic,ide_cd,piix,ide_disk
-----------------------------------------------------------------------------------------------------------------------------------------
распечатка файла /ect/modprobe.d/sound.YaST2save
# W60f.1mooHvuqz43:82801BA/BAM AC'97 Audio
alias char-major-116 snd
alias snd-card-0 snd_intel8x0
options snd_intel8x0 enable=1 index=0
-----------------------------------------------------------------------------------------------------------------------------------------
распечатка файла /ect/modprobe.d/tv.YaST2save
alias char-major-81 videodev
options i2c-algo-bit bit_test=1
options saa7134 card=34 tuner=9
# YaST configured TV card
# t2XO.SHDiqSt30B9:User-Defined TV Card
alias char-major-81-0 saa7134
alias char-major-81-1 off
alias char-major-81-2 off
alias char-major-81-3 off
-----------------------------------------------------------------------------------------------------------------------------------------
распечатка файла /ect/modprobe.conf
#
# Copyright © 1996-2002 SuSE Linux AG Nuernberg, Germany.
# All rights reserved.
#
# Author: Hubert Mantel <mantel@suse.de>, 1996-2002
#
# Configuration file for loadable modules; used by modprobe
#
# Please don't edit this file. Place your settings into
# /etc/modprobe.conf.local instead.
#
#
########################################################################
# Aliases - specify your hardware
########################################################################
install eth0 /bin/true
install eth1 /bin/true
install tr0 /bin/true
install scsi_hostadapter /bin/true
install fb0 /bin/true
########################################################################
# only used for Mylex or Compaq Raid as module
########################################################################
install block-major-48 /bin/true
install block-major-49 /bin/true
install block-major-72 /bin/true
install block-major-73 /bin/true
########################################################################
# only needed for fifth and sixth IDE adaptor
########################################################################
install block-major-56 /bin/true
install block-major-57 /bin/true
########################################################################
# mouse (for older busmice)
########################################################################
install char-major-10 /bin/true
########################################################################
# If you want to use the new autofs4
########################################################################
alias autofs autofs4
########################################################################
# For parallel port devices, uncomment the following two lines and
# change "frpw" to the protocol type you use
########################################################################
# install paride /sbin/modprobe --ignore-install paride && { /sbin/modprobe --ignore-install frpw; }
# remove paride { /sbin/modprobe -r --ignore-remove frpw; } ; /sbin/modprobe -r --ignore-remove paride
########################################################################
# Options; these are examples; uncomment and modify the lines you need
########################################################################
# options cdu31a cdu31a_port=0x340 cdu31a_irq=0
# options sbpcd sbpcd=0x230,1
# options aztcd aztcd=0x320
# options cm206 cm206=0x340,11
# options gscd gscd=0x340
# options mcd mcd=0x300,11
# options mcdx mcdx=0x300,11
# options optcd optcd=0x340
# options sjcd sjcd_base=0x340
# options sonycd535 sonycd535=0x340
# options isp16 isp16_cdrom_base=0x340 isp16_cdrom_irq=0 isp16_cdrom_dma=0 isp16_cdrom_type=Sanyo
# options ne io=0x300 irq=5
# Use this if you have two cards:
# options ne io=0x300,0x320 irq=5,7
# options tulip options=0
# options 3c59x options=0
# options 3c501 io=0x280 irq=5
# options 3c503 io=0x280 irq=5 xcvr=0
# options 3c505 io=0x300 irq=10
# options 3c507 io=0x300 irq=10
# options 3c509 irq=10
# options at1700 io=0x260 irq=10
# options smc-ultra io=0x200 irq=10
# options wd io=0x300 irq=10
# options smc9194 io=0x200 irq=10 ifport=0
# options e2100 io=0x300 irq=10 mem=0xd0000 xcvr=0
# options depca io=0x200 irq=7
# options ewrk3 io=0x300 irq=10
# options eexpress io=0x300 irq=10
# options hp-plus io=0x300 irq=10
# options hp io=0x300 irq=10
# options hp100 hp100_port=0x380
# options apricot io=0x300 irq=10
# options ac3200 io=0x300 irq=10 mem=0xd0000
# options de620 io=0x378 irq=7 bnc=1
# options ibmtr io=0xa20
# options arcnet io=0x300 irq=10 shmem=0xd0000
# options plip io=0x378 irq=7
# options eepro io=0x260 irq=10 mem=0x6000
# options eth16i io=0x2a0 irq=10
# options fmv18x io=0x220 irq=10
# options ni52 io=0x360 irq=9 memstart=0xd0000 memend=0xd4000
# options bttv pll=1 radio=0 card=0
#options tuner type=0
# options msp3400 once=1 simple=1
# install bttv /sbin/modprobe --ignore-install bttv && { /sbin/modprobe -k tuner; /sbin/modprobe -k msp3400; }
#
install dummy0 /sbin/modprobe -o dummy0 --ignore-install dummy
install dummy1 /sbin/modprobe -o dummy1 --ignore-install dummy
remove dummy0 /sbin/modprobe -r -o dummy0 --ignore-remove dummy
remove dummy1 /sbin/modprobe -r -o dummy1 --ignore-remove dummy
########################################################################
# cipe section
########################################################################
alias cipcb0 cipcb
alias cipcb1 cipcb
options cipcb cipe_debug=0
########################################################################
# block dev aliases
########################################################################
alias block-major-1 rd
alias block-major-2 floppy
install block-major-3 /bin/true
alias block-major-7 loop
alias block-major-8 sd_mod
alias block-major-11 sr_mod
alias block-major-13 xd
alias block-major-15 cdu31a
alias block-major-16 gscd
alias block-major-17 optcd
alias block-major-18 sjcd
alias block-major-20 mcdx
install block-major-22 /bin/true
alias block-major-23 mcd
alias block-major-24 sonycd535
alias block-major-25 sbpcd
alias block-major-26 sbpcd
alias block-major-27 sbpcd
alias block-major-28 sbpcd
alias block-major-29 aztcd
alias block-major-32 cm206
install block-major-33 /bin/true
install block-major-34 /bin/true
# network block device
install block-major-43 /bin/true
alias block-major-45 pd
alias block-major-46 pcd
alias block-major-47 pf
alias block-major-117 evms
########################################################################
# char dev aliases
########################################################################
alias char-major-6 lp
alias char-major-9 st
alias char-major-10-130 softdog
install char-major-10-134 /bin/true
install char-major-10-135 /bin/true
alias char-major-10-175 agpgart
alias char-major-10-181 toshiba
alias char-major-10-250 sonypi
options sonypi minor=250
install char-major-15 /bin/true
alias char-major-19 cyclades
alias char-major-20 cyclades
alias char-major-21 sg
alias char-major-27 ftape
install char-major-29 /bin/true
alias char-major-36 netlink_dev
# alias char-major-43 hisax
# alias char-major-44 hisax
# alias char-major-45 hisax
install char-major-43 /bin/true
install char-major-44 /bin/true
install char-major-45 /bin/true
alias char-major-48 riscom8
alias char-major-49 riscom8
alias char-major-67 coda
alias char-major-75 specialix
alias char-major-76 specialix
alias char-major-81 videodev
install char-major-81-0 /bin/true
install char-major-81-1 /bin/true
install char-major-81-2 /bin/true
install char-major-81-3 /bin/true
alias char-major-83 vtx
options vtx quiet=1
alias char-major-89-* i2c-dev
options i2c-algo-bit bit_test=1
alias char-major-96 pt
alias char-major-97 pg
alias char-major-107 3dfx
alias char-major-109 lvm-mod
# remove this if sound is configured
alias char-major-116 snd
install char-major-116 /bin/true
alias snd-card-0 snd_intel8x0
options snd_intel8x0 enable=1 index=0
########################################################################
# ppp over ethernet
# the kernel 2.2 uses pppox
# the kernel 2.4 uses pppoe
########################################################################
alias char-major-108 ppp_generic
alias char-major-144 pppoe
alias net-pf-24 pppoe
########################################################################
# IrDA
########################################################################
alias char-major-161 ircomm-tty
alias char-major-162 raw
########################################################################
# ISDN
########################################################################
install b1pci /bin/true
install c4 /bin/true
install sc /bin/true
install hisax /bin/true
install hisax_fcpcipnp /bin/true
install hfc4s8s_l1 /bin/true
install hysdn /bin/true
install pcbit /bin/true
install t1pci /bin/true
install divas /bin/true
install fcdsl /bin/true
install fcdsl2 /bin/true
install fcpci /bin/true
install fcpnp /bin/true
install fcdslsl /etc/sysconfig/isdn/scripts/hotplug_pci
########################################################################
# USB
########################################################################
install char-major-166 /bin/true
########################################################################
# Moxa Multiport Serial Boards
########################################################################
alias char-major-172 moxa
alias char-major-173 moxa
# options moxa type=2,,, baseaddr=0xdc000,,, numports=8,,,
alias char-major-174 mxser
alias char-major-175 mxser
# options mxser ioaddr=0x180
#alias char-major-180 usbcore
alias InterMezzo intermezzo
alias char-major-185 intermezzo
alias char-major-188 usbserial
alias char-major-195* nvidia
alias char-major-206 osst
alias char-major-212 /bin/true
alias binfmt-204 binfmt_aout
alias binfmt-263 binfmt_aout
alias binfmt-264 binfmt_aout
alias binfmt-267 binfmt_aout
alias binfmt-0064 binfmt_aout
alias binfmt-0008 binfmt_aout
alias iso9660 isofs
alias tty-ldisc-1 slip
alias tty-ldisc-2 serio
alias tty-ldisc-5 mkiss
# alias tty-ldisc-7 6pack
install tty-ldisc-7 /bin/true
# IrDA
alias tty-ldisc-11 irtty-sir
# alias ax0 mkiss
install ax0 /bin/true
# alias sp0 6pack
install sp0 /bin/true
alias slip0 slip
alias sl0 slip
alias slip1 slip
alias sl1 slip
########################################################################
# the kernel 2.2 uses ppp.o as ppp driver,
# the kernel 2.4 uses ppp_generic.o
########################################################################
alias ppp0 ppp_generic
alias ppp1 ppp_generic
alias tty-ldisc-3 ppp_async
alias plip0 plip
alias plip1 plip
# Tunnel interfaces
alias sit0 ipv6
alias gre0 ip_gre
alias ipip0 ipip
alias ppp-compress-18 ppp_mppe
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate
alias net-pf-1 unix
alias net-pf-3 ax25
# install net-pf-3 /bin/true
alias net-pf-4 ipx
# install net-pf-4 /bin/true
alias net-pf-5 appletalk
# install net-pf-5 /bin/true
alias net-pf-6 netrom
# install net-pf-6 /bin/true
alias net-pf-10 ipv6
# install net-pf-10 /bin/true
alias net-pf-11 rose
# install net-pf-11 /bin/true
alias net-pf-15 af_key
alias net-pf-17 af_packet
alias net-pf-31 bluetooth
alias bt-proto-0 l2cap
alias bt-proto-2 sco
alias bt-proto-3 rfcomm
alias bt-proto-4 bnep
alias md-personality-1 linear
alias md-personality-2 raid0
alias md-personality-3 raid1
alias md-personality-4 raid5
alias md-personality-7 multipath
alias tap0 ethertap
alias tap1 ethertap
alias tap2 ethertap
alias tap3 ethertap
alias tap4 ethertap
alias tap5 ethertap
alias tap6 ethertap
alias tap7 ethertap
alias tap8 ethertap
alias tap9 ethertap
alias tap10 ethertap
alias tap11 ethertap
alias tap12 ethertap
alias tap13 ethertap
alias tap14 ethertap
alias tap15 ethertap
alias xfrm-type-2-50 esp4
alias xfrm-type-2-51 ah4
alias xfrm-type-2-108 ipcomp
alias xfrm-type-10-50 esp6
alias xfrm-type-10-51 ah6
alias xfrm-type-10-108 ipcomp6
# don't try to reset isa-pnp cards on startup
options isa-pnp isapnp_reset=0
# Linux-ABI
install binfmt_misc /sbin/modprobe --ignore-install binfmt_misc && { mount -t binfmt_misc none /proc/sys/fs/binfmt_misc; }
remove binfmt_misc { umount /proc/sys/fs/binfmt_misc; } ; /sbin/modprobe -r --ignore-remove binfmt_misc
# Bluetooth
alias bt-proto-5 cmtp
alias bt-proto-6 hidp
# Load lp after parport
install parport /sbin/modprobe -i parport && /sbin/modprobe lp
# end of common part for modprobe.conf
# begin of i386 part for modprobe.conf
alias char-major-4 serial
alias char-major-5 serial
alias parport_lowlevel parport_pc
# options parport_pc io=0x378 irq=none,none
# If you have multiple parallel ports, specify them this way:
# options parport_pc io=0x378,0x278 irq=none,none
# Linux ACP modem (Mwave)
alias char-major-10-219 mwave
# options mwave dspirq=10 dspio=0x130 uartirq=3 uartio=0x2f8
# nVidia nforce chipset (network + audio)
#alias eth0 nvnet
#alias sound-slot-1 nvaudio
#alias usb-interface usb-ohci
# IBM thinkpad tpctl
# see /usr/share/doc/packages/tpctl/
alias char-major-10-170 thinkpad
# options thinkpad enable_smapi=0
# Linux-ABI
alias char-major-30 abi-ibcs
alias binfmt-0004 binfmt_coff
alias binfmt-332 abi-ibcs
alias binfmt-518 abi-ibcs
alias binfmt-002c abi-ibcs
alias personality-1 abi-ibcs
alias personality-2 abi-ibcs
alias personality-3 abi-sco
alias personality-4 abi-wyse
alias personality-5 abi-ibcs
alias personality-7 abi-ibcs
alias personality-13 abi-solaris
alias personality-14 abi-uw7
# required for DRI support on SiS chips
options sisfb mode=none mem=12288
# ata_piix can't handle ICH6 in AHCI mode
install ata_piix /sbin/modprobe ahci; /sbin/modprobe --ignore-install ata_piix
# end of i386 part for modprobe.conf
# please keep this at the end and add local modifications to modules.conf.local
include /etc/modprobe.d
include /etc/modprobe.conf.local
все отлично, но под линуксом (я юзаю SuSE10) есть проблема: изображение класс но нет звука и пульт не работает, не знаю не могу
определить номер tuner=?,а теперь по порядку: Файлы конфигурации ниже,для просмотра тв использую tvtime (xawtv и kdetv плюются и система
виснет глухо до самаго reset), аудиокабель из тюнера вставлен в лайн ин компа - АС97встроенный,пробовал и в микрофон-настройки звука и
чувствительности микрофона выставлены на максимум, к тюнеру подведен кабель спутникового тв- общий в подъезде, в настройках tvtime
выбран видеорежим PAL- регион China Broadcast из-за лучшего изображения, -Россию пробовал,но тоже нет звука, стандарт звука PAL-DK Mono,
в источнике входа видеосигнала указан Television. Вот и вроде изложил проблему, помогите пожалуйста, я и в гугле рылся и вот все чего
нарыл, может хотябы со звуком поможите, я за пульт уже и не прошу, спасибо- Был рад поделиться очень жду совета - просто рядом некого
спросить,может кто глянет в каком файле чего надо мне подправить?
-----------------------------------------------------------------------------------------------------------------------------------------
по команде dmesg выдает:
Linux version 2.6.13-15-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Sep 13 14:56:15 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
On node 0 totalpages: 65520
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61424 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 IntelR ) @ 0x000f6510
ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000
ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: local apic disabled
Allocating PCI resources starting at 10000000 (gap: 10000000:efb00000)
Built 1 zonelists
Kernel command line: root=/dev/hda7 vga=0x31a selinux=0 resume=/dev/hda6 splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 735.090 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 253904k/262080k available (2028k kernel code, 7516k reserved, 700k data, 204k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1471.43 BogoMIPS (lpj=2942860)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: Intel Pentium III (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 1697k freed
ACPI: Looking for DSDT in initrd... not found!
not found!
ACPI: setting ELCR to 0200 (from 0a20)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb190, last bus=2
PCI: Using configuration type 1
ACPI: Subsystem revision 20050408
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Linux Plug and Play Support v0.97 © Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
pnp: 00:01: ioport range 0x400-0x4bf could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: c000-cfff
MEM window: ec000000-edffffff
PREFETCH window: e0000000-e7ffffff
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: ee000000-ee0fffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:1e.0 to 64
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1147127057.284:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xe0000000, mapped to 0xd0880000, using 10240k, total 32768k
vesafb: mode is 1280x1024x16, linelength=2560, pages=11
vesafb: protected mode interface info at c000:5458
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 112645 bytes,<6>...found (1280x1024, 17839 bytes, v3).
Console: switching to colour frame buffer device 158x59
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
mice: PS/2 mouse device common for all mice
input: PC Speaker
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.38
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Using IPI Shortcut mode
ACPI wakeup devices:
SLPB PCI0 HUB0 USB0 USB1 MODM
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 204k freed
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 5
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: WDC WD2000JB-00GVA0, ATA DISK drive
hdb: SAMSUNG SV2001H, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 1024KiB
hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 >
hdb: max request size: 128KiB
hdb: 39179952 sectors (20060 MB) w/2048KiB Cache, CHS=38869/16/63, UDMA(100)
hdb: cache flushes supported
hdb: hdb1 hdb2 hdb3 < hdb5 > hdb4
Probing IDE interface ide1...
hdc: ASUS CRW-5232AS, ATAPI CD/DVD-ROM drive
hdd: TSSTcorpCD/DVDW TS-H552U, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: CPU0 (power states: C1[C1])
ACPI: Processor [CPU0] (supports 2 throttling states)
hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
ACPI: Thermal Zone [THRM] (41 C)
ACPI: Fan [FAN] (on)
Attempting manual resume
swsusp: Suspend partition has wrong signature?
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver 2.1.23 [Flags: R/W MODULE].
NTFS volume version 3.1.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
lp0: using parport0 (interrupt-driven).
Adding 546168k swap on /dev/hda6. Priority:-1 extents:1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Linux agpgart interface v0.101 © Dave Jones
agpgart: Detected an Intel i815 Chipset.
agpgart: AGP aperture is 64M @ 0xe8000000
hw_random: RNG not detected
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1f.5 to 64
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: UHCI Host Controller
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1f.2: irq 11, io base 0x0000d000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNK1] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci_hcd 0000:00:1f.4: UHCI Host Controller
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1f.4: irq 9, io base 0x0000d800
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-1: new low speed USB device using uhci_hcd and address 2
intel8x0_measure_ac97_clock: measured 54781 usecs
intel8x0: clocking to 48000
Linux video capture interface: v1.00
saa7130/34: v4l2 driver version 0.2.14 loaded
ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
saa7134[0]: found at 0000:02:09.0, rev: 1, irq: 5, latency: 32, mmio: 0xee000000
saa7134[0]: subsystem: 185b:c200, board: Noval Prime TV 7133 [card=34,insmod option]
saa7134[0]: board init: gpio is 4c0001
saa7134[0]: i2c eeprom 00: 5b 18 00 c2 ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
usb 1-2: new full speed USB device using uhci_hcd and address 3
: chip found @ 0xc0 (saa7134[0])
: All bytes are equal. It is not a TEA5767
tuner 1-0060: type set to 9 (Alps HSBH1)
: chip found @ 0xc2 (saa7134[0])
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
usbcore: registered new driver hiddev
hiddev96: USB HID v1.10 Device [American Power Conversion Back-UPS ES 525 FW:851.t2.I USB FW:t2] on usb-0000:00:1f.2-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
NET: Registered protocol family 10
Disabled Privacy Extensions on device c036b920(lo)
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
NET: Registered protocol family 23
IrCOMM protocol (Dag Brattli)
bootsplash: status on console 0 changed to on
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized radeon 1.16.0 20050311 on minor 0:
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
subfs 0.9
tuner 1-0061: tuner type not set
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
subfs: unsuccessful attempt to mount media (256)
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
-----------------------------------------------------------------------------------------------------------------------------------------
по команде lsmod выдает:
Module Size Used by
ppp_deflate 6016 0
zlib_deflate 23960 1 ppp_deflate
bsd_comp 6144 0
ppp_async 10880 1
ppp_generic 28052 7 ppp_deflate,bsd_comp,ppp_async
slhc 7296 1 ppp_generic
hfsplus 75140 0
subfs 7552 1
radeon 75264 1
drm 61844 2 radeon
raw 39456 0
irtty_sir 6016 2
sir_dev 16556 1 irtty_sir
ircomm_tty 23432 0
ircomm 13060 1 ircomm_tty
irda 115000 3 sir_dev,ircomm_tty,ircomm
crc_ccitt 2176 2 ppp_async,irda
snd_pcm_oss 59168 0
snd_mixer_oss 18944 1 snd_pcm_oss
snd_seq 51984 0
snd_seq_device 8588 1 snd_seq
button 7056 0
battery 10244 0
ac 5252 0
ipv6 242752 14
usbhid 43616 2
edd 9824 0
tuner 35112 0
saa7134 109908 0
video_buf 20868 1 saa7134
v4l2_common 5760 1 saa7134
v4l1_compat 13060 1 saa7134
ir_common 8196 1 saa7134
videodev 9088 1 saa7134
uhci_hcd 32016 0
usbcore 112640 5 usbhid,uhci_hcd
snd_intel8x0 33408 0
snd_ac97_codec 90876 1 snd_intel8x0
i2c_i801 8844 0
i2c_core 20368 3 tuner,saa7134,i2c_i801
generic 4484 0 [permanent]
snd_ac97_bus 2432 1 snd_ac97_codec
snd_pcm 93064 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 24452 2 snd_seq,snd_pcm
snd 60420 8 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd
_pcm,snd_timer
soundcore 9184 2 saa7134,snd
snd_page_alloc 10632 2 snd_intel8x0,snd_pcm
intel_agp 22044 1
agpgart 33096 2 drm,intel_agp
shpchp 88676 0
pci_hotplug 26164 1 shpchp
parport_pc 38980 1
lp 11460 0
parport 33864 2 parport_pc,lp
nls_utf8 2048 1
ntfs 182288 1
nls_iso8859_1 4096 3
nls_cp437 5760 3
vfat 12800 3
fat 49692 1 vfat
dm_mod 54972 0
ext3 130440 5
jbd 59940 1 ext3
fan 4996 0
thermal 14472 0
ide_cd 39684 0
cdrom 36896 1 ide_cd
processor 24252 1 thermal
piix 9988 0 [permanent]
ide_disk 17152 12
ide_core 122380 4 generic,ide_cd,piix,ide_disk
-----------------------------------------------------------------------------------------------------------------------------------------
распечатка файла /ect/modprobe.d/sound.YaST2save
# W60f.1mooHvuqz43:82801BA/BAM AC'97 Audio
alias char-major-116 snd
alias snd-card-0 snd_intel8x0
options snd_intel8x0 enable=1 index=0
-----------------------------------------------------------------------------------------------------------------------------------------
распечатка файла /ect/modprobe.d/tv.YaST2save
alias char-major-81 videodev
options i2c-algo-bit bit_test=1
options saa7134 card=34 tuner=9
# YaST configured TV card
# t2XO.SHDiqSt30B9:User-Defined TV Card
alias char-major-81-0 saa7134
alias char-major-81-1 off
alias char-major-81-2 off
alias char-major-81-3 off
-----------------------------------------------------------------------------------------------------------------------------------------
распечатка файла /ect/modprobe.conf
#
# Copyright © 1996-2002 SuSE Linux AG Nuernberg, Germany.
# All rights reserved.
#
# Author: Hubert Mantel <mantel@suse.de>, 1996-2002
#
# Configuration file for loadable modules; used by modprobe
#
# Please don't edit this file. Place your settings into
# /etc/modprobe.conf.local instead.
#
#
########################################################################
# Aliases - specify your hardware
########################################################################
install eth0 /bin/true
install eth1 /bin/true
install tr0 /bin/true
install scsi_hostadapter /bin/true
install fb0 /bin/true
########################################################################
# only used for Mylex or Compaq Raid as module
########################################################################
install block-major-48 /bin/true
install block-major-49 /bin/true
install block-major-72 /bin/true
install block-major-73 /bin/true
########################################################################
# only needed for fifth and sixth IDE adaptor
########################################################################
install block-major-56 /bin/true
install block-major-57 /bin/true
########################################################################
# mouse (for older busmice)
########################################################################
install char-major-10 /bin/true
########################################################################
# If you want to use the new autofs4
########################################################################
alias autofs autofs4
########################################################################
# For parallel port devices, uncomment the following two lines and
# change "frpw" to the protocol type you use
########################################################################
# install paride /sbin/modprobe --ignore-install paride && { /sbin/modprobe --ignore-install frpw; }
# remove paride { /sbin/modprobe -r --ignore-remove frpw; } ; /sbin/modprobe -r --ignore-remove paride
########################################################################
# Options; these are examples; uncomment and modify the lines you need
########################################################################
# options cdu31a cdu31a_port=0x340 cdu31a_irq=0
# options sbpcd sbpcd=0x230,1
# options aztcd aztcd=0x320
# options cm206 cm206=0x340,11
# options gscd gscd=0x340
# options mcd mcd=0x300,11
# options mcdx mcdx=0x300,11
# options optcd optcd=0x340
# options sjcd sjcd_base=0x340
# options sonycd535 sonycd535=0x340
# options isp16 isp16_cdrom_base=0x340 isp16_cdrom_irq=0 isp16_cdrom_dma=0 isp16_cdrom_type=Sanyo
# options ne io=0x300 irq=5
# Use this if you have two cards:
# options ne io=0x300,0x320 irq=5,7
# options tulip options=0
# options 3c59x options=0
# options 3c501 io=0x280 irq=5
# options 3c503 io=0x280 irq=5 xcvr=0
# options 3c505 io=0x300 irq=10
# options 3c507 io=0x300 irq=10
# options 3c509 irq=10
# options at1700 io=0x260 irq=10
# options smc-ultra io=0x200 irq=10
# options wd io=0x300 irq=10
# options smc9194 io=0x200 irq=10 ifport=0
# options e2100 io=0x300 irq=10 mem=0xd0000 xcvr=0
# options depca io=0x200 irq=7
# options ewrk3 io=0x300 irq=10
# options eexpress io=0x300 irq=10
# options hp-plus io=0x300 irq=10
# options hp io=0x300 irq=10
# options hp100 hp100_port=0x380
# options apricot io=0x300 irq=10
# options ac3200 io=0x300 irq=10 mem=0xd0000
# options de620 io=0x378 irq=7 bnc=1
# options ibmtr io=0xa20
# options arcnet io=0x300 irq=10 shmem=0xd0000
# options plip io=0x378 irq=7
# options eepro io=0x260 irq=10 mem=0x6000
# options eth16i io=0x2a0 irq=10
# options fmv18x io=0x220 irq=10
# options ni52 io=0x360 irq=9 memstart=0xd0000 memend=0xd4000
# options bttv pll=1 radio=0 card=0
#options tuner type=0
# options msp3400 once=1 simple=1
# install bttv /sbin/modprobe --ignore-install bttv && { /sbin/modprobe -k tuner; /sbin/modprobe -k msp3400; }
#
install dummy0 /sbin/modprobe -o dummy0 --ignore-install dummy
install dummy1 /sbin/modprobe -o dummy1 --ignore-install dummy
remove dummy0 /sbin/modprobe -r -o dummy0 --ignore-remove dummy
remove dummy1 /sbin/modprobe -r -o dummy1 --ignore-remove dummy
########################################################################
# cipe section
########################################################################
alias cipcb0 cipcb
alias cipcb1 cipcb
options cipcb cipe_debug=0
########################################################################
# block dev aliases
########################################################################
alias block-major-1 rd
alias block-major-2 floppy
install block-major-3 /bin/true
alias block-major-7 loop
alias block-major-8 sd_mod
alias block-major-11 sr_mod
alias block-major-13 xd
alias block-major-15 cdu31a
alias block-major-16 gscd
alias block-major-17 optcd
alias block-major-18 sjcd
alias block-major-20 mcdx
install block-major-22 /bin/true
alias block-major-23 mcd
alias block-major-24 sonycd535
alias block-major-25 sbpcd
alias block-major-26 sbpcd
alias block-major-27 sbpcd
alias block-major-28 sbpcd
alias block-major-29 aztcd
alias block-major-32 cm206
install block-major-33 /bin/true
install block-major-34 /bin/true
# network block device
install block-major-43 /bin/true
alias block-major-45 pd
alias block-major-46 pcd
alias block-major-47 pf
alias block-major-117 evms
########################################################################
# char dev aliases
########################################################################
alias char-major-6 lp
alias char-major-9 st
alias char-major-10-130 softdog
install char-major-10-134 /bin/true
install char-major-10-135 /bin/true
alias char-major-10-175 agpgart
alias char-major-10-181 toshiba
alias char-major-10-250 sonypi
options sonypi minor=250
install char-major-15 /bin/true
alias char-major-19 cyclades
alias char-major-20 cyclades
alias char-major-21 sg
alias char-major-27 ftape
install char-major-29 /bin/true
alias char-major-36 netlink_dev
# alias char-major-43 hisax
# alias char-major-44 hisax
# alias char-major-45 hisax
install char-major-43 /bin/true
install char-major-44 /bin/true
install char-major-45 /bin/true
alias char-major-48 riscom8
alias char-major-49 riscom8
alias char-major-67 coda
alias char-major-75 specialix
alias char-major-76 specialix
alias char-major-81 videodev
install char-major-81-0 /bin/true
install char-major-81-1 /bin/true
install char-major-81-2 /bin/true
install char-major-81-3 /bin/true
alias char-major-83 vtx
options vtx quiet=1
alias char-major-89-* i2c-dev
options i2c-algo-bit bit_test=1
alias char-major-96 pt
alias char-major-97 pg
alias char-major-107 3dfx
alias char-major-109 lvm-mod
# remove this if sound is configured
alias char-major-116 snd
install char-major-116 /bin/true
alias snd-card-0 snd_intel8x0
options snd_intel8x0 enable=1 index=0
########################################################################
# ppp over ethernet
# the kernel 2.2 uses pppox
# the kernel 2.4 uses pppoe
########################################################################
alias char-major-108 ppp_generic
alias char-major-144 pppoe
alias net-pf-24 pppoe
########################################################################
# IrDA
########################################################################
alias char-major-161 ircomm-tty
alias char-major-162 raw
########################################################################
# ISDN
########################################################################
install b1pci /bin/true
install c4 /bin/true
install sc /bin/true
install hisax /bin/true
install hisax_fcpcipnp /bin/true
install hfc4s8s_l1 /bin/true
install hysdn /bin/true
install pcbit /bin/true
install t1pci /bin/true
install divas /bin/true
install fcdsl /bin/true
install fcdsl2 /bin/true
install fcpci /bin/true
install fcpnp /bin/true
install fcdslsl /etc/sysconfig/isdn/scripts/hotplug_pci
########################################################################
# USB
########################################################################
install char-major-166 /bin/true
########################################################################
# Moxa Multiport Serial Boards
########################################################################
alias char-major-172 moxa
alias char-major-173 moxa
# options moxa type=2,,, baseaddr=0xdc000,,, numports=8,,,
alias char-major-174 mxser
alias char-major-175 mxser
# options mxser ioaddr=0x180
#alias char-major-180 usbcore
alias InterMezzo intermezzo
alias char-major-185 intermezzo
alias char-major-188 usbserial
alias char-major-195* nvidia
alias char-major-206 osst
alias char-major-212 /bin/true
alias binfmt-204 binfmt_aout
alias binfmt-263 binfmt_aout
alias binfmt-264 binfmt_aout
alias binfmt-267 binfmt_aout
alias binfmt-0064 binfmt_aout
alias binfmt-0008 binfmt_aout
alias iso9660 isofs
alias tty-ldisc-1 slip
alias tty-ldisc-2 serio
alias tty-ldisc-5 mkiss
# alias tty-ldisc-7 6pack
install tty-ldisc-7 /bin/true
# IrDA
alias tty-ldisc-11 irtty-sir
# alias ax0 mkiss
install ax0 /bin/true
# alias sp0 6pack
install sp0 /bin/true
alias slip0 slip
alias sl0 slip
alias slip1 slip
alias sl1 slip
########################################################################
# the kernel 2.2 uses ppp.o as ppp driver,
# the kernel 2.4 uses ppp_generic.o
########################################################################
alias ppp0 ppp_generic
alias ppp1 ppp_generic
alias tty-ldisc-3 ppp_async
alias plip0 plip
alias plip1 plip
# Tunnel interfaces
alias sit0 ipv6
alias gre0 ip_gre
alias ipip0 ipip
alias ppp-compress-18 ppp_mppe
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate
alias net-pf-1 unix
alias net-pf-3 ax25
# install net-pf-3 /bin/true
alias net-pf-4 ipx
# install net-pf-4 /bin/true
alias net-pf-5 appletalk
# install net-pf-5 /bin/true
alias net-pf-6 netrom
# install net-pf-6 /bin/true
alias net-pf-10 ipv6
# install net-pf-10 /bin/true
alias net-pf-11 rose
# install net-pf-11 /bin/true
alias net-pf-15 af_key
alias net-pf-17 af_packet
alias net-pf-31 bluetooth
alias bt-proto-0 l2cap
alias bt-proto-2 sco
alias bt-proto-3 rfcomm
alias bt-proto-4 bnep
alias md-personality-1 linear
alias md-personality-2 raid0
alias md-personality-3 raid1
alias md-personality-4 raid5
alias md-personality-7 multipath
alias tap0 ethertap
alias tap1 ethertap
alias tap2 ethertap
alias tap3 ethertap
alias tap4 ethertap
alias tap5 ethertap
alias tap6 ethertap
alias tap7 ethertap
alias tap8 ethertap
alias tap9 ethertap
alias tap10 ethertap
alias tap11 ethertap
alias tap12 ethertap
alias tap13 ethertap
alias tap14 ethertap
alias tap15 ethertap
alias xfrm-type-2-50 esp4
alias xfrm-type-2-51 ah4
alias xfrm-type-2-108 ipcomp
alias xfrm-type-10-50 esp6
alias xfrm-type-10-51 ah6
alias xfrm-type-10-108 ipcomp6
# don't try to reset isa-pnp cards on startup
options isa-pnp isapnp_reset=0
# Linux-ABI
install binfmt_misc /sbin/modprobe --ignore-install binfmt_misc && { mount -t binfmt_misc none /proc/sys/fs/binfmt_misc; }
remove binfmt_misc { umount /proc/sys/fs/binfmt_misc; } ; /sbin/modprobe -r --ignore-remove binfmt_misc
# Bluetooth
alias bt-proto-5 cmtp
alias bt-proto-6 hidp
# Load lp after parport
install parport /sbin/modprobe -i parport && /sbin/modprobe lp
# end of common part for modprobe.conf
# begin of i386 part for modprobe.conf
alias char-major-4 serial
alias char-major-5 serial
alias parport_lowlevel parport_pc
# options parport_pc io=0x378 irq=none,none
# If you have multiple parallel ports, specify them this way:
# options parport_pc io=0x378,0x278 irq=none,none
# Linux ACP modem (Mwave)
alias char-major-10-219 mwave
# options mwave dspirq=10 dspio=0x130 uartirq=3 uartio=0x2f8
# nVidia nforce chipset (network + audio)
#alias eth0 nvnet
#alias sound-slot-1 nvaudio
#alias usb-interface usb-ohci
# IBM thinkpad tpctl
# see /usr/share/doc/packages/tpctl/
alias char-major-10-170 thinkpad
# options thinkpad enable_smapi=0
# Linux-ABI
alias char-major-30 abi-ibcs
alias binfmt-0004 binfmt_coff
alias binfmt-332 abi-ibcs
alias binfmt-518 abi-ibcs
alias binfmt-002c abi-ibcs
alias personality-1 abi-ibcs
alias personality-2 abi-ibcs
alias personality-3 abi-sco
alias personality-4 abi-wyse
alias personality-5 abi-ibcs
alias personality-7 abi-ibcs
alias personality-13 abi-solaris
alias personality-14 abi-uw7
# required for DRI support on SiS chips
options sisfb mode=none mem=12288
# ata_piix can't handle ICH6 in AHCI mode
install ata_piix /sbin/modprobe ahci; /sbin/modprobe --ignore-install ata_piix
# end of i386 part for modprobe.conf
# please keep this at the end and add local modifications to modules.conf.local
include /etc/modprobe.d
include /etc/modprobe.conf.local
MainOs: SuSE 10.0