Проблема с установкой дров

[3a1ko3]

Не могу поставить дрова на сетевуху Marvell(встроенная, 1000Mbit). Система Fedora Core 4.

вот лог-файл:

Installation script for sk98lin driver.
Version 8.16.2.3 (Mar-30-2005)
©Copyright 2003-2004 Marvell®.
====================================================
Add to your trouble-report the logfile install.log
which is located in the DriverInstall directory.
====================================================

1) installation
2) generate patch
3) exit
Choose your favorite installation method: 1

Please read this carfully!

This script will automatically compile and load the sk98lin
driver on your host system. Before performing both compilation
and loading, it is necessary to shutdown any device using the
sk98lin kernel module and to unload the old sk98lin kernel
module. This script will do this automatically per default.
If you want to shutdown and unload the old sk98lin kernel module
manually, run the script in the EXPERT mode.
Please plug a card into your machine.
Without a card we aren't
able to check the full driver functionality.

Do you want proceed? (y/N) y

Create tmp dir (/tmp/Sk98IGHhqUmaVqRbLIIJrlMFF) [ OK ]
Check user id (0) [ OK ]
Check kernel version (2.6.11-1.1369_FC4) [ OK ]
Check kernel symbol file (/proc/kallsyms) [ OK ]
Check kernel type (SP) [ OK ]
Check architecture (found) [ OK ]
Set architecture (i386) [ OK ]
Check compiler (/usr/bin/gcc) [ OK ]
Check mcmodel flags (none) [ OK ]
Check module support (/sbin/insmod) [ OK ]
Check make (/usr/bin/make) [ OK ]
Check archive file (sk98lin) [ OK ]
Check kernel gcc version (4.0.0)
(Kernel:4.0.0 == gcc:4.0.0) [ OK ]
Check sk98lin driver availability (not loaded) [ OK ]
Check kernel header files (/usr/src/linux) [ OK ]
Unpack the sources (done) [ OK ]
Check sources for .config file (/usr/src/linux/.config)[ OK ]
Copy and check .config file (done) [ OK ]
Check the mem address space (highmem) [ OK ]
Change IOMMU (disabled) [ OK ]
Create new .config file (done) [ OK ]
Execute: make oldconfig (done) [ OK ]
Check kernel header version (Kernel:2.6.11-1.1369_FC4
== Header:2.6.11-1.1369_FC4) [ OK ]
Check kernel functions (Changed: nothing) [ OK ]
Compile the kernel (error) [ failed ]

An error has occurred during the compile proces which prevented
the installation from completing.
Take a look at the log file install.log for more informations.
Installation of sk98lin driver module failed.

install.log:
+++ Install mode: User
+++ Driver version: 8.16.2.3 (Mar-30-2005)
+++ Kernel version 2.6.11-1.1369_FC4
+++ smp_count=0
+++ cpu_number=1
+++ kernel_machine=i686
+++ Architecture: i386
+++ Unpack the sources
+++ ====================================
+++ tar xfv sk98lin.tar
2.4/
2.4/h/
2.4/h/skdrv1st.h
2.4/h/skdrv2nd.h
2.4/Makefile
2.4/skdim.c
2.4/skproc.c
2.4/skge.c
2.4/sky2.c
2.4/skethtool.c
2.6/
2.6/h/
2.6/h/skdrv1st.h
2.6/h/skdrv2nd.h
2.6/Makefile
2.6/skdim.c
2.6/skproc.c
2.6/skge.c
2.6/sky2.c
2.6/skethtool.c
common/
common/h/
common/h/skgesirq.h
common/h/skgetwsi.h
common/h/xmac_ii.h
common/h/sktypes.h
common/h/skvpd.h
common/h/skaddr.h
common/h/skcsum.h
common/h/skgehw.h
common/h/skdebug.h
common/h/lm80.h
common/h/skrlmt.h
common/h/sky2le.h
common/h/sktwsi.h
common/h/skqueue.h
common/h/skversion.h
common/h/skerror.h
common/h/skgeinit.h
common/h/sktimer.h
common/h/skgedrv.h
common/h/skgepnm2.h
common/h/skgepnmi.h
common/h/skgehwt.h
common/skgesirq.c
common/skvpd.c
common/skaddr.c
common/skcsum.c
common/sklm80.c
common/skxmac2.c
common/sk98lin.htm
common/sk98lin.txt
common/skrlmt.c
common/sky2le.c
common/sktwsi.c
common/skqueue.c
common/sk98lin.4
common/skgeinit.c
common/sktimer.c
common/skgepnmi.c
common/skgehwt.c
common/skgemib.c
misc/
misc/Kconfig
isc/Configure.help

+++ Compile the driver
+++ ====================================
make: Entering directory `/usr/src/linux'
Building modules, stage 2.
MODPOST
make: Leaving directory `/usr/src/linux'
+++ Compiler error

[Onanimous]

А директория /usr/src/linux есть?

[Liksys]

Если нет, то это скорее всего должна быть ссылка на каталог с исходняками ядра.

[Onanimous]

Хотя проще использовать модуль из исходников ядра (Marvell Yukon Chipset / SysKonnect SK-98xx Support (SK98LIN))
Только не забудь про modprobe sky2

[Liksys]

Хотя проще использовать модуль из исходников ядра (Marvell Yukon Chipset / SysKonnect SK-98xx Support (SK98LIN))
Только не забудь про modprobe sky2

Тоже решение

[3a1ko3]

Хотя проще использовать модуль из исходников ядра (Marvell Yukon Chipset / SysKonnect SK-98xx Support (SK98LIN))
Только не забудь про modprobe sky2

А как это сделать? Я полный нуб, под линухом 3 день сижу..

[Onanimous]

http://www.linuxcenter.ru/lib/articles/sys...6_install.phtml