Samba не видит принтер (вроде всё настроено...)

[kernel_mode]

Вообщем ситуация такая: у меня дома соединены по локалке 2 компа: мой и виндовый. Самба не видит принтер (при попытке настройки через центр управления), хотя комп с виндой видно отлично со всеми общими папками.

[Liksys]

/etc/samba/smb.conf в студию

[kernel_mode]

/etc/samba/smb.conf в студию

Всегда пожалуйста

Код: Выделить всё

# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# For a step to step guide on installing, configuring and using samba,
# read the Samba HOWTO Collection.
#
# Any line which starts with a; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#
#======================= Global Settings =====================================
[global]

# workgroup = NT-Domain-Name or Workgroup-Name, eg: LINUX2
workgroup = HOME

# server string is the equivalent of the NT Description field
server string = KIRILL

# Security mode. Defines in which mode Samba will operate. Possible
# values are share, user, server, domain and ads. Most people will want
# user level security. See the HOWTO Collection for details.
security = share

# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
;   hosts allow = 192.168.1. 192.168.2. 127.

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
load printers = yes

# you may wish to override the location of the printcap file
;   printcap name = /etc/printcap

# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
;   printcap name = lpstat

# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
;   printing = cups

# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
;  guest account = pcguest

# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba.%m

# Put a capping on the size of the log files (in Kb).
max log size = 50

# Use password server option only with security = server
# The argument list may include:
#   password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
#   password server = *
;   password server = <NT-Server-Name>

# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
;   realm = MY_REALM

# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
;   passdb backend = tdbsam

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting.
# Note: Consider carefully the location in the configuration file of
#       this line.  The included file is read at that point.
;   include = /usr/local/samba/lib/smb.conf.%m

# Most people will find that this option gives better performance.
# See the chapter 'Samba performance issues' in the Samba HOWTO Collection
# and the manual pages for details.
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
socket options = TCP_NODELAY

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
;   interfaces = 192.168.12.2/24 192.168.13.2/24

# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
;   local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
;   os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
;   domain master = yes

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
;   preferred master = yes

# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
;   domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
;   logon script = %m.bat
# run a specific logon batch file per username
;   logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
#        %L substitutes for this servers netbios name, %U is username
#        You must uncomment the [Profiles] share below
;   logon path = \\%L\Profiles\%U

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
;   wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
#    Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one    WINS Server on the network. The default is NO.
;   wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The default is NO.
dns proxy = no
restrict anonymous = no
domain master = no
preferred master = no
max protocol = NT
acl compatibility = winnt
ldap ssl = No
server signing = Auto
netbios name = LINUX_HOST

# These scripts are used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
;  add user script = /usr/sbin/useradd %u
;  add group script = /usr/sbin/groupadd %g
;  add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
;  delete user script = /usr/sbin/userdel %u
;  delete user from group script = /usr/sbin/deluser %u %g
;  delete group script = /usr/sbin/groupdel %g


#============================ Share Definitions ==============================
[homes]
comment = Home Directories
browseable = no
read only = no

# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
;   comment = Network Logon Service
;   path = /usr/local/samba/lib/netlogon
;   guest ok = yes
;   writable = no
;   share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
;    path = /usr/local/samba/profiles
;    browseable = no
;    guest ok = yes


# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
# Set public = yes to allow user 'guest account' to print
guest ok = no
printable = yes

[SHARE]
path = /Share
guest ok = yes
read only = no
case sensitive = no
strict locking = no
msdfs proxy = no

[OFFTOP]
Сообщений: 111

ОС: Slackware 11
а прикольно смотрится =)
[OFFTOP]

[Liksys]

Подскажу, а дальше попробуй сам Если не получица - пиши.
Раскоментируй строки:
printcap name = /etc/printcap
printing = cups
Или, если не хочешь возитьа с конфигами, почитай в моей статье про SWAT: http://linuxforum.ru/index.php?showtopic=24962

[kernel_mode]

Подскажу, а дальше попробуй сам Если не получица - пиши.
Раскоментируй строки:
printcap name = /etc/printcap
printing = cups
Или, если не хочешь возитьа с конфигами, почитай в моей статье про SWAT: http://linuxforum.ru/index.php?showtopic=24962

Я теперь вообще сеть не вижу =)

[Liksys]

Прочитай статью, как составлять конфиг и что делает та или иная опция, мож ты что-то неправильно включил. Не пользуйся дефолтным конфигом, напиши свой.
Принтер сначала надо настроить в купсе, а затем расшарить в Самбе.

[pzp-5]

Принтер сначала надо настроить в купсе, а затем расшарить в Самбе.

Хотел бы уточнить у автора темы - а принтер на Линуксовой или виндовой машине находится (физически)?

[Liksys]

Принтер сначала надо настроить в купсе, а затем расшарить в Самбе.

Хотел бы уточнить у автора темы - а принтер на Линуксовой или виндовой машине находится (физически)?

Кстати да. Если на Линуксовой - то делай как я сказал. Если на виндовой - то надо ковырять, скорее всего винду.

[kernel_mode]

Принтер сначала надо настроить в купсе, а затем расшарить в Самбе.

Хотел бы уточнить у автора темы - а принтер на Линуксовой или виндовой машине находится (физически)?

Принтер подключён к виндовой машине и расшарен.

[pzp-5]

Принтер подключён к виндовой машине и расшарен.

Тест самба-клиента : smbclient -L Имя_вин_машины -N
Опция -N - чтобы не просила пароля.
У меня выдает так:

Код: Выделить всё

smbclient -L SERVER -N

        Sharename       Type      Comment
        ---------       ----      -------
        CANON_1120      Printer
        PRINTER$        Disk
        CANON LBP810    Printer
        D               Disk
        C               Disk
        IPC$            IPC       Взаимодействие между удаленными процессами

        Server               Comment
        ---------            -------
        MNH                  C-633
        NINA                 C 1000
        SERVER               C-1000

        Workgroup            Master
        ---------            -------
        PZP_5                SERVER

И какая марка принтера? В Линуксе он поддерживается?