Acorp M-56PIM и ядро в Gentoo (Чего не хватает для работы модема...)

[Patriot]

После установки драйвера, модем не опредиляется в Gentoo см. лог. при этом, после установки этих же дров, в АлтЛинуксе или Мандрейке модем работает нормально. Я думаю, что скорей всего не правильно скомпилировал ядро (что то забыл включить в него).

Люди добрые помогите дельным советом.

bash-2.05b$ su
Password:
bash-2.05b# hcfpciconfig
Linux HCF controllerless modem drivers, version 0.99mbsibeta02123100

WARNING: this is an EXPERIMENTAL BETA VERSION of the HCF drivers for Linux.
USE AT YOUR OWN RISK! See the file /usr/lib/hcfpci/LICENSE for details.

Conexant Systems neither distributes nor maintains this package.
PLEASE DO NOT CONTACT CONEXANT REGARDING THIS SOFTWARE!!!
If you require assistance or need more information, go to:
http://www.mbsi.ca/cnxtlindrv

Should we attempt to automatically configure your hardware? [yes] yes
/usr/sbin/hcfpciconfig: line 86: lspci: command not found

No supported modem device found.
Is the modem presently installed in your system? [yes] yes

1) PCI device 14f1:1085 (Conexant) (rev 8).
2) None of the above

Which PCI communication controller is your HCF modem? (1-2) 1
/usr/sbin/hcfpciconfig: line 86: lspci: command not found


Please enter your modem's PCI Vendor ID []: 14f1

Please enter your modem's PCI Device ID []: 1085

1) /etc/hcfpci/inf/hcfv90_lan_linux.inf
2) /etc/hcfpci/inf/hcfv90_linux.inf
3) /etc/hcfpci/inf/hcfv92_linux.inf
4) /etc/hcfpci/inf/hcfv92_riptide_linux.inf
5) None of the above

Which INF file would you like to use with your HCF modem? (1-5) 2

Selected PCI VendorID=14f1 DeviceID=1085
and INF file /etc/hcfpci/inf/hcfv90_linux.inf

Supported countries:

ARGENTINA, AUSTRALIA, AUSTRIA, BELGIUM,
BRAZIL, BULGARIA, CANADA, CHILE, CHINA,
CROATIA, CZECH_REPUBLIC, DENMARK, FINLAND, FRANCE,
GERMANY, GREECE, HONG-KONG, HUNGARY, ICELAND,
INDIA, INDONESIA, IRELAND, ISRAEL, ITALY,
JAPAN, KOREA, LUXEMBOURG, MALAYSIA, MEXICO,
NETHERLANDS, NEW_ZEALAND, NORWAY, PHILIPPINES, POLAND,
PORTUGAL, RUSSIA, SINGAPORE, SLOVAKIA, SLOVENIA,
SOUTH_AFRICA, SPAIN, SWEDEN, SWITZERLAND, TAIWAN,
THAILAND, TURKEY, UK, UNITED_ARAB_EMIRATES, USA

Please enter your country name [RUSSIA]: RUSSIA

Configuring modem for country: "RUSSIA"
You can change this setting later with the command "hcfpciconfig --country"

This package does not contain pre-built modules suitable for your system:
Distribution: unknown-unknown
Kernel arch: i686
Kernel version: linux-2.4.26-gentoo-r9

Trying to automatically re-compile the modules..
(this requires a C compiler and proper kernel sources to be installed)

Where is the linux source build directory that matches your running kernel?
[/lib/modules/2.4.26-gentoo-r9/build]

Re-compiling HCF modules for kernel 2.4.26-gentoo-r9, using source directory
/lib/modules/2.4.26-gentoo-r9/build. Please wait..

ERROR: Module re-compilation and installation failed!
Please examine the log file "/tmp/hcfpciconfig-buildlog.txt" to determine why.

-------------------------------------------------------------------------------------------------
Файл hcfpciconfig-buildlog.txt

tail: `-1' option is obsolete; use `-n 1' since this will be removed in the future
rm -f *.o *.a
tail: `-1' option is obsolete; use `-n 1' since this will be removed in the future
make[1]: Entering directory `/usr/lib/hcfpci/modules/osspec'
rm -f *.o *.a
make[1]: Leaving directory `/usr/lib/hcfpci/modules/osspec'
* compiling (gcc) mod_osspec.c
In file included from mod_osspec.c:51:
../modules/osspec/include/oscompat.h:274:5: missing terminating " character
../modules/osspec/include/oscompat.h:320:1: missing terminating " character
make: *** [mod_osspec.o] Ошибка 1