Картридер на буке (не работает :-(((()

[L0ks]

Есть вообщем бук hp nx7010, с встроенным картридером! скока не изгалялся не хочет работать! Помогите заставить его работать!

Код:

Jul 23 16:41:18 FreeBSD kernel: Copyright © 1992-2007 The FreeBSD Project. Jul 23 16:41:18 FreeBSD kernel: Copyright © 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Jul 23 16:41:18 FreeBSD kernel: The Regents of the University of California. All rights reserved. Jul 23 16:41:18 FreeBSD kernel: FreeBSD is a registered trademark of The FreeBSD Foundation. Jul 23 16:41:18 FreeBSD kernel: FreeBSD 6.2-RELEASE #2: Mon Jul 23 15:14:33 VLAST 2007 Jul 23 16:41:18 FreeBSD kernel: loki@FreeBSD.khv.rostagroup.ru:/usr/obj/usr/src/sys/HARON Jul 23 16:41:18 FreeBSD kernel: Timecounter "i8254" frequency 1193182 Hz quality 0 Jul 23 16:41:18 FreeBSD kernel: CPU: Intel® Pentium® M processor 1600MHz (1594.83-MHz 686-class CPU) Jul 23 16:41:18 FreeBSD kernel: Origin = "GenuineIntel" Id = 0x695 Stepping = 5 Jul 23 16:41:18 FreeBSD kernel: Features=0xa7e9f9bf Jul 23 16:41:18 FreeBSD kernel: Features2=0x180 Jul 23 16:41:18 FreeBSD kernel: real memory = 536674304 (511 MB) Jul 23 16:41:18 FreeBSD kernel: avail memory = 515772416 (491 MB) Jul 23 16:41:18 FreeBSD kernel: kbd1 at kbdmux0 Jul 23 16:41:18 FreeBSD kernel: acpi0: on motherboard Jul 23 16:41:18 FreeBSD kernel: acpi0: Power Button (fixed) Jul 23 16:41:18 FreeBSD kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 Jul 23 16:41:18 FreeBSD kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 Jul 23 16:41:18 FreeBSD kernel: acpi_ec0: port 0x62,0x66 on acpi0 Jul 23 16:41:18 FreeBSD kernel: cpu0: on acpi0 Jul 23 16:41:18 FreeBSD kernel: acpi_perf0: on cpu0 Jul 23 16:41:18 FreeBSD kernel: acpi_perf0: failed in PERF_STATUS attach Jul 23 16:41:18 FreeBSD kernel: device_attach: acpi_perf0 attach returned 6 Jul 23 16:41:18 FreeBSD kernel: acpi_perf0: on cpu0 Jul 23 16:41:18 FreeBSD kernel: acpi_perf0: failed in PERF_STATUS attach Jul 23 16:41:18 FreeBSD kernel: device_attach: acpi_perf0 attach returned 6 Jul 23 16:41:18 FreeBSD kernel: acpi_throttle0: on cpu0 Jul 23 16:41:18 FreeBSD kernel: pcib0: port 0xcf8-0xcff on acpi0 Jul 23 16:41:18 FreeBSD kernel: pci0: on pcib0 Jul 23 16:41:18 FreeBSD kernel: agp0: mem 0xb0000000-0xbfffffff at device 0.0 on pci0 Jul 23 16:41:18 FreeBSD kernel: pcib1: at device 1.0 on pci0 Jul 23 16:41:18 FreeBSD kernel: pci1: on pcib1 Jul 23 16:41:18 FreeBSD kernel: drm0: port 0x3000-0x30ff mem 0x98000000-0x9fffffff,0x90400000-0x9040ffff irq 10 at device 0.0 on pci1 Jul 23 16:41:18 FreeBSD kernel: info: [drm] AGP at 0xb0000000 256MB Jul 23 16:41:18 FreeBSD kernel: info: [drm] Initialized radeon 1.24.0 20060225 Jul 23 16:41:18 FreeBSD kernel: uhci0: port 0x48c0-0x48df irq 10 at device 29.0 on pci0 Jul 23 16:41:18 FreeBSD kernel: uhci0: [GIANT-LOCKED] Jul 23 16:41:18 FreeBSD kernel: usb0: on uhci0 Jul 23 16:41:18 FreeBSD kernel: usb0: USB revision 1.0 Jul 23 16:41:18 FreeBSD kernel: uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Jul 23 16:41:18 FreeBSD kernel: uhub0: 2 ports with 2 removable, self powered Jul 23 16:41:18 FreeBSD kernel: uhci1: port 0x48e0-0x48ff irq 5 at device 29.1 on pci0 Jul 23 16:41:18 FreeBSD kernel: uhci1: [GIANT-LOCKED] Jul 23 16:41:18 FreeBSD kernel: usb1: on uhci1 Jul 23 16:41:18 FreeBSD kernel: usb1: USB revision 1.0 Jul 23 16:41:18 FreeBSD kernel: uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Jul 23 16:41:18 FreeBSD kernel: uhub1: 2 ports with 2 removable, self powered Jul 23 16:41:18 FreeBSD kernel: uhci2: port 0x4c00-0x4c1f irq 5 at device 29.2 on pci0 Jul 23 16:41:18 FreeBSD kernel: uhci2: [GIANT-LOCKED] Jul 23 16:41:18 FreeBSD kernel: usb2: on uhci2 Jul 23 16:41:18 FreeBSD kernel: usb2: USB revision 1.0 Jul 23 16:41:18 FreeBSD kernel: uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Jul 23 16:41:18 FreeBSD kernel: uhub2: 2 ports with 2 removable, self powered Jul 23 16:41:18 FreeBSD kernel: ehci0: mem 0xa0000000-0xa00003ff irq 5 at device 29.7 on pci0 Jul 23 16:41:18 FreeBSD kernel: ehci0: [GIANT-LOCKED] Jul 23 16:41:18 FreeBSD kernel: usb3: EHCI version 1.0 Jul 23 16:41:18 FreeBSD kernel: usb3: companion controllers, 2 ports each: usb0 usb1 usb2 Jul 23 16:41:18 FreeBSD kernel: usb3: on ehci0 Jul 23 16:41:18 FreeBSD kernel: usb3: USB revision 2.0 Jul 23 16:41:18 FreeBSD kernel: uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 Jul 23 16:41:18 FreeBSD kernel: uhub3: 6 ports with 6 removable, self powered Jul 23 16:41:18 FreeBSD kernel: pcib2: at device 30.0 on pci0 Jul 23 16:41:18 FreeBSD kernel: pci_link3: BIOS IRQ 11 for 2.2.INTA is invalid Jul 23 16:41:18 FreeBSD kernel: pci2: on pcib2 Jul 23 16:41:18 FreeBSD kernel: fwohci0: port 0x2400-0x247f mem 0x90200000-0x902007ff irq 10 at device 0.0 on pci2 Jul 23 16:41:18 FreeBSD kernel: fwohci0: OHCI version 1.0 (ROM=1) Jul 23 16:41:18 FreeBSD kernel: fwohci0: No. of Isochronous channels is 4. Jul 23 16:41:18 FreeBSD kernel: fwohci0: EUI64 00:02:3f:46:4a:40:43:73 Jul 23 16:41:18 FreeBSD kernel: fwohci0: Phy 1394a available S400, 2 ports. Jul 23 16:41:18 FreeBSD kernel: fwohci0: Link S400, max_rec 2048 bytes. Jul 23 16:41:18 FreeBSD kernel: firewire0: on fwohci0 Jul 23 16:41:18 FreeBSD kernel: sbp0: on firewire0 Jul 23 16:41:18 FreeBSD kernel: fwohci0: Initiate bus reset Jul 23 16:41:18 FreeBSD kernel: fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode Jul 23 16:41:18 FreeBSD kernel: firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) Jul 23 16:41:18 FreeBSD kernel: firewire0: bus manager 0 (me) Jul 23 16:41:18 FreeBSD kernel: re0: port 0x2000-0x20ff mem 0x90300000-0x903000ff irq 10 at device 1.0 on pci2 Jul 23 16:41:18 FreeBSD kernel: miibus0: on re0 Jul 23 16:41:18 FreeBSD kernel: rlphy0: on miibus0 Jul 23 16:41:18 FreeBSD kernel: rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Jul 23 16:41:18 FreeBSD kernel: re0: Ethernet address: 00:02:3f:25:f0:13 Jul 23 16:41:18 FreeBSD kernel: re0: [FAST] Jul 23 16:41:18 FreeBSD kernel: pci2: at device 2.0 (no driver attached) Jul 23 16:41:18 FreeBSD kernel: cbb0: mem 0x90100000-0x90100fff irq 5 at device 4.0 on pci2 Jul 23 16:41:18 FreeBSD kernel: cardbus0: on cbb0 Jul 23 16:41:18 FreeBSD kernel: pccard0: <16-bit PCCard bus> on cbb0 Jul 23 16:41:18 FreeBSD kernel: isab0: at device 31.0 on pci0 Jul 23 16:41:18 FreeBSD kernel: isa0: on isab0 Jul 23 16:41:18 FreeBSD kernel: atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x4c40-0x4c4f irq 5 at device 31.1 on pci0 Jul 23 16:41:18 FreeBSD kernel: ata0: on atapci0 Jul 23 16:41:18 FreeBSD kernel: ata1: on atapci0 Jul 23 16:41:18 FreeBSD kernel: pci0: at device 31.3 (no driver attached) Jul 23 16:41:18 FreeBSD kernel: pci0: at device 31.5 (no driver attached) Jul 23 16:41:18 FreeBSD kernel: pci0: at device 31.6 (no driver attached) Jul 23 16:41:18 FreeBSD kernel: battery0: on acpi0 Jul 23 16:41:18 FreeBSD kernel: acpi_acad0: on acpi0 Jul 23 16:41:18 FreeBSD kernel: acpi_button0: on acpi0 Jul 23 16:41:18 FreeBSD kernel: acpi_lid0: on acpi0 Jul 23 16:41:18 FreeBSD kernel: atkbdc0: port 0x60,0x64 irq 1 on acpi0 Jul 23 16:41:18 FreeBSD kernel: atkbd0: irq 1 on atkbdc0 Jul 23 16:41:18 FreeBSD kernel: kbd0 at atkbd0 Jul 23 16:41:18 FreeBSD kernel: atkbd0: [GIANT-LOCKED] Jul 23 16:41:18 FreeBSD kernel: psm0: irq 12 on atkbdc0 Jul 23 16:41:18 FreeBSD kernel: psm0: [GIANT-LOCKED] Jul 23 16:41:18 FreeBSD kernel: psm0: model IntelliMouse, device ID 3 Jul 23 16:41:18 FreeBSD kernel: ppc0: port 0x378-0x37f,0x778-0x77a irq 7 drq 1 on acpi0 Jul 23 16:41:18 FreeBSD kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode Jul 23 16:41:18 FreeBSD kernel: ppc0: FIFO with 16/16/8 bytes threshold Jul 23 16:41:18 FreeBSD kernel: ppbus0: on ppc0 Jul 23 16:41:18 FreeBSD kernel: lpt0: on ppbus0 Jul 23 16:41:18 FreeBSD kernel: lpt0: Interrupt-driven port Jul 23 16:41:18 FreeBSD kernel: pmtimer0 on isa0 Jul 23 16:41:18 FreeBSD kernel: orm0: at iomem 0xc0000-0xcffff on isa0 Jul 23 16:41:18 FreeBSD kernel: sc0: at flags 0x100 on isa0 Jul 23 16:41:18 FreeBSD kernel: sc0: VGA <16 virtual consoles, flags=0x300> Jul 23 16:41:18 FreeBSD kernel: vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Jul 23 16:41:18 FreeBSD kernel: Timecounter "TSC" frequency 1594830379 Hz quality 800 Jul 23 16:41:18 FreeBSD kernel: Timecounters tick every 1.000 msec Jul 23 16:41:18 FreeBSD kernel: ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default Jul 23 16:41:18 FreeBSD kernel: ad0: 38154MB at ata0-master UDMA100 Jul 23 16:41:18 FreeBSD kernel: acd0: CDRW at ata1-master PIO4 Jul 23 16:41:18 FreeBSD kernel: Trying to mount root from ufs:/dev/ad0s1a Jul 23 16:41:19 FreeBSD kernel: re0: link state changed to UP

[phasma]

а он есть в списке поддерживаемого оборудования ?

[L0ks]

Если честно, то в списке поддерживаемого оборудования я не увидел ни одного картридера, за исключением USB.. может плох смотрел? на линухе он работал.

[phasma]

FreeBSD ограничевается количеством поддерживаемого обарудования, но оно действительно работает ))) а Linux поддерживает кучу обарудования, но порой работает оно через одно место )))

[L0ks]

блин, а как узнать что за железка? пробовал через pciconf - им там и не пахнет, но он есть и он рабочий!

Код: Выделить всё

agp0@pci0:0:0:    class=0x060000 card=0x08600e11 chip=0x33408086 rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82855PM Host-Hub Interface Bridge'
    class    = bridge
    subclass = HOST-PCI
pcib1@pci0:1:0:    class=0x060400 card=0x00000000 chip=0x33418086 rev=0x03 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82855PM AGP Bridge'
    class    = bridge
    subclass = PCI-PCI
uhci0@pci0:29:0:    class=0x0c0300 card=0x08600e11 chip=0x24c28086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller'
    class    = serial bus
    subclass = USB
uhci1@pci0:29:1:    class=0x0c0300 card=0x08600e11 chip=0x24c48086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller'
    class    = serial bus
    subclass = USB
uhci2@pci0:29:2:    class=0x0c0300 card=0x08600e11 chip=0x24c78086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller'
    class    = serial bus
    subclass = USB
ehci0@pci0:29:7:    class=0x0c0320 card=0x08600e11 chip=0x24cd8086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB 2.0 EHCI Controller'
    class    = serial bus
    subclass = USB
pcib2@pci0:30:0:    class=0x060400 card=0x00000000 chip=0x24488086 rev=0x81 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge'
    class    = bridge
    subclass = PCI-PCI
isab0@pci0:31:0:    class=0x060100 card=0x00000000 chip=0x24cc8086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DBM (ICH4-M) LPC Interface Bridge'
    class    = bridge
    subclass = PCI-ISA
atapci0@pci0:31:1:    class=0x01018a card=0x08600e11 chip=0x24ca8086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DBM (ICH4-M) UltraATA/100 EIDE Controller'
    class    = mass storage
    subclass = ATA
none0@pci0:31:3:    class=0x0c0500 card=0x08600e11 chip=0x24c38086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller'
    class    = serial bus
    subclass = SMBus
none1@pci0:31:5:    class=0x040100 card=0x08600e11 chip=0x24c58086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller'
    class    = multimedia
    subclass = audio
none2@pci0:31:6:    class=0x070300 card=0x08600e11 chip=0x24c68086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller'
    class    = simple comms
    subclass = generic modem
drm0@pci1:0:0:    class=0x030000 card=0x08600e11 chip=0x4c661002 rev=0x01 hdr=0x00
    vendor   = 'ATI Technologies Inc'
    device   = 'Mobility Radeon 9000'
    class    = display
    subclass = VGA
fwohci0@pci2:0:0:    class=0x0c0010 card=0x30441106 chip=0x30441106 rev=0x80 hdr=0x00
    vendor   = 'VIA Technologies Inc'
    device   = 'VT6306 VIA Fire II IEEE-1394 OHCI Link Layer Controller'
    class    = serial bus
    subclass = FireWire
re0@pci2:1:0:    class=0x020000 card=0x08600e11 chip=0x813910ec rev=0x20 hdr=0x00
    vendor   = 'Realtek Semiconductor'
    device   = 'RT8139 (A/B/C/810x/813x/C+) Fast Ethernet Adapter'
    class    = network
    subclass = ethernet
none3@pci2:2:0:    class=0x028000 card=0x12f6103c chip=0x42208086 rev=0x05 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = 'PRO/Wireless 2200BG Network Connection'
    class    = network
cbb0@pci2:4:0:    class=0x060700 card=0x08600e11 chip=0x14101524 rev=0x01 hdr=0x02
    vendor   = 'ENE Technology Inc'
    device   = 'CB-1420 CardBus Controller'
    class    = bridge
    subclass = PCI-CardBus

[Jay]

Собственно, насколько я себе представляю внутреннее устройство компьютеров, кард-ридер должен быть подключен к какой-то шине данных. То есть, на выбор: USB, FireWire, PCI/PCI-E, PCMCIA, IDE, SATA. ISA, HyperTransport, RS232, LPT рассматривать не будем. Если бы я делал ноутбуки, я бы просто цеплял кард-ридер к одному из USB-портов на одном из чипсетных хабов.

Попробуйте поискать что-нибудь осмысленное в выводе команд:

Код: Выделить всё

- usbdevs -dv
- fwcontrol
- pccardc
- ls -laF /dev/da*
- camcontrol devlist

[L0ks]

Ну вообщем нашел что за девайс, это "Winbond Secure Digital Storage (SD/MMC) Device" ! Теперь как его заставить работать?))))