В общем суть проблемы
ASP 11.2
Есть мать Intel D945gcnl проц Core 2 DUO 2.0, 2гб оперативки, SATA винт и двдюк
Есть 2 сетевухи одна 3com другая acorp на RLT чипе. (пробовал и другие варинты)
Сетевухи упорно не хотят работать в паре. Если что то и удается настроить то через пару пакетов пишет Disabling IRQ и какойнить номер, и все больше кроме пакетов на себя в лучшем случае не проходит.
LSPCI
Код: Выделить всё
00:00.0 Host bridge: Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 945G/GZ Express Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
05:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
05:05.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74)GMESG
Код:
Linux version 2.6.17-1.2157.1aspsmp (build@amd64.asplinux.com.ua) (gcc version 4.0.2 20051125 (Red Hat 4.0.2-8)) #1 SMP Fri Aug 11 03:45:43 EEST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007e5a9000 (usable)
BIOS-e820: 000000007e5a9000 - 000000007e6ad000 (ACPI NVS)
BIOS-e820: 000000007e6ad000 - 000000007f594000 (usable)
BIOS-e820: 000000007f594000 - 000000007f59c000 (reserved)
BIOS-e820: 000000007f59c000 - 000000007f62a000 (usable)
BIOS-e820: 000000007f62a000 - 000000007f62e000 (reserved)
BIOS-e820: 000000007f62e000 - 000000007f6a9000 (usable)
BIOS-e820: 000000007f6a9000 - 000000007f6e9000 (ACPI NVS)
BIOS-e820: 000000007f6e9000 - 000000007f6ed000 (usable)
BIOS-e820: 000000007f6ed000 - 000000007f6ff000 (ACPI data)
BIOS-e820: 000000007f6ff000 - 000000007f700000 (usable)
BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
1143MB HIGHMEM available.
895MB LOWMEM available.
found SMP MP-table at 000fe200
NX (Execute Disable) protection: active
On node 0 totalpages: 521984
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225279 pages, LIFO batch:31
HighMem zone: 292609 pages, LIFO batch:31
DMI 2.4 present.
Using APIC driver default
ACPI: RSDP (v000 INTEL ) @ 0x000fe020
ACPI: RSDT (v001 INTEL D945GCR 0x00000014 0x01000013) @ 0x7f6fd038
ACPI: FADT (v001 INTEL D945GCR 0x00000014 MSFT 0x01000013) @ 0x7f6fc000
ACPI: MADT (v001 INTEL D945GCR 0x00000014 MSFT 0x01000013) @ 0x7f6f6000
ACPI: WDDT (v001 INTEL D945GCR 0x00000014 MSFT 0x01000013) @ 0x7f6f5000
ACPI: MCFG (v001 INTEL D945GCR 0x00000014 MSFT 0x01000013) @ 0x7f6f4000
ACPI: ASF! (v032 INTEL D945GCR 0x00000014 MSFT 0x01000013) @ 0x7f6f3000
ACPI: HPET (v001 INTEL D945GCR 0x00000014 MSFT 0x01000013) @ 0x7f6f2000
ACPI: SSDT (v001 INTEL CpuPm 0x00000014 MSFT 0x01000013) @ 0x7f6f1000
ACPI: SSDT (v001 INTEL Cpu0Ist 0x00000014 MSFT 0x01000013) @ 0x7f6f0000
ACPI: SSDT (v001 INTEL Cpu1Ist 0x00000014 MSFT 0x01000013) @ 0x7f6ef000
ACPI: SSDT (v001 INTEL Cpu2Ist 0x00000014 MSFT 0x01000013) @ 0x7f6ee000
ACPI: SSDT (v001 INTEL Cpu3Ist 0x00000014 MSFT 0x01000013) @ 0x7f6ed000
ACPI: DSDT (v001 INTEL D945GCR 0x00000014 MSFT 0x01000013) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: Product ID: APIC at: 0xFEE00000
Enabling APIC mode: Flat. Using 0 I/O APICs
BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)
Processors: 2
Allocating PCI resources starting at 88000000 (gap: 80000000:7ff80000)
Built 1 zonelists
Kernel command line: root=/dev/sda6 reboot=b pci=noacpi pci=usepirqmask pci=nobiosirq quiet rhgb
PCI: Unknown option `nobiosirq'
mapped APIC to ffffd000 (fee00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07b7000 soft=c07d7000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2062704k/2087936k available (2082k kernel code, 22456k reserved, 1445k data, 236k init, 1169020k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Using HPET for base-timer
Using HPET for gettimeofday
Detected 1995.010 MHz processor.
Using hpet for high-res timesource
Calibrating delay using timer specific routine.. 3993.32 BogoMIPS (lpj=7986650)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000140 0000e39d 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
CPU0: Intel® Core™2 CPU 4400 @ 2.00GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c07b8000 soft=c07d8000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3990.06 BogoMIPS (lpj=7980130)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000140 0000e39d 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel® Core™2 CPU 4400 @ 2.00GHz stepping 02
Total of 2 processors activated (7983.39 BogoMIPS).
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=4000
checking if image is initramfs... it is
Freeing initrd memory: 635k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
Linux Plug and Play Support v0.97 © Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Boot video device is 0000:00:02.0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
pnp: 00:06: ioport range 0x500-0x53f has been reserved
pnp: 00:06: ioport range 0x400-0x47f could not be reserved
pnp: 00:06: ioport range 0x680-0x6ff has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: 2000-2fff
MEM window: 90100000-901fffff
PREFETCH window: 90300000-903fffff
PCI: Bridge: 0000:00:1c.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.3
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: 1000-1fff
MEM window: 90000000-900fffff
PREFETCH window: 90400000-904fffff
PCI: No IRQ known for interrupt pin A of device 0000:00:1c.0. Please try using pci=biosirq.
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: No IRQ known for interrupt pin B of device 0000:00:1c.1. Please try using pci=biosirq.
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: No IRQ known for interrupt pin C of device 0000:00:1c.2. Please try using pci=biosirq.
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: No IRQ known for interrupt pin D of device 0000:00:1c.3. Please try using pci=biosirq.
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
audit(1191411005.688:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 407A4C33B4DA055E
- User ID: ASPLinux, Ltd. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: No IRQ known for interrupt pin A of device 0000:00:1c.0. Please try using pci=biosirq.
PCI: Setting latency timer of device 0000:00:1c.0 to 64
pcie_portdrv_probe->Dev[27d0:8086] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: No IRQ known for interrupt pin B of device 0000:00:1c.1. Please try using pci=biosirq.
PCI: Setting latency timer of device 0000:00:1c.1 to 64
pcie_portdrv_probe->Dev[27d2:8086] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
PCI: No IRQ known for interrupt pin C of device 0000:00:1c.2. Please try using pci=biosirq.
PCI: Setting latency timer of device 0000:00:1c.2 to 64
pcie_portdrv_probe->Dev[27d4:8086] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
PCI: No IRQ known for interrupt pin D of device 0000:00:1c.3. Please try using pci=biosirq.
PCI: Setting latency timer of device 0000:00:1c.3 to 64
pcie_portdrv_probe->Dev[27d6:8086] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 © Dave Jones
agpgart: Detected an Intel 945G Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0x80000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH7: IDE controller at PCI slot 0000:00:1f.1
ICH7: chipset revision 1
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x30b0-0x30b7, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: Optiarc DVD RW AD-5170A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
PNP: PS/2 controller doesn't have KBD irq; using default 1
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI wakeup devices:
SLPB P32 PS2M UAR1 PEG0 PEX0 PEX1 PEX2 PEX3 PEX4 PEX5 UHC1 UHC2 UHC3 UHC4 EHCI AC9M AZAL
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 236k freed
Write protecting the kernel read-only data: 952k
SCSI subsystem initialized
libata version 1.20 loaded.
ata_piix 0000:00:1f.2: version 1.05
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x30C8 ctl 0x30EE bmdma 0x30A0 irq 9
ata2: SATA max UDMA/133 cmd 0x30C0 ctl 0x30EA bmdma 0x30A8 irq 9
input: GenPS/2 Genius Mouse as /class/input/input0
ata1: dev 0 cfg 49:2f00 82:746b 83:7f61 84:4123 85:7469 86:bc41 87:4123 88:207f
ata1: dev 0 ATA-7, max UDMA/133, 312581808 sectors: LBA48
ata1: dev 0 configured for UDMA/133
scsi0 : ata_piix
ata2: SATA port has no device.
scsi1 : ata_piix
Vendor: ATA Model: WDC WD1600AAJS-0 Rev: 05.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 < sda5 sda6 sda7 >
sd 0:0:0:0: Attached scsi disk sda
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1191411009.172:2): selinux=0 auid=4294967295
floppy0: no floppy controllers found
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:05:05.0: 3Com PCI 3c905C Tornado at f882a100.
8139too Fast Ethernet driver 0.9.27
eth1: RealTek RTL8139 at 0xf883e000, 00:50:22:8d:18:2a, IRQ 11
eth1: Identified 8139 chip type 'RTL-8139C'
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
PCI: Setting latency timer of device 0000:02:00.0 to 64
eth2: Identified chip type is 'RTL8168B/8111B'.
eth2: r10001.03, the Linux device driver for Realtek Ethernet Controllers at 0x2000, 00:19:d1:8c:57:5d, IRQ 10
eth2: Auto-negotiation Enabled.
BUG: soft lockup detected on CPU#0!
<c0447bfb> softlockup_tick+0x9f/0xb2 <c042b80f> update_process_times+0x39/0x5c
<c041757e> smp_apic_timer_interrupt+0x59/0x5f <c04047ff> apic_timer_interrupt+0x1f/0x24
<c041949c> hpet_readl+0x8/0x9 <c0410e67> delay_hpet+0x24/0x2d
<c04e0b31> __delay+0x9/0xa <f89810e1> R1000_READ_GMII_REG+0x1d/0x3f [r1000]
<f8981143> r1000_set_speed_duplex+0x40/0x51 [r1000] <f8982000> r1000_init_one+0x822/0x965 [r1000]
<c0547282> __driver_attach+0x0/0x8f <c04e85df> pci_device_probe+0x36/0x55
<c05471cd> driver_probe_device+0x42/0x8b <c05472e7> __driver_attach+0x65/0x8f
<c05468af> bus_for_each_dev+0x33/0x55 <c05470b9> driver_attach+0x11/0x13
<c0547282> __driver_attach+0x0/0x8f <c0546b1e> bus_add_driver+0x5c/0xdf
<c04e81f6> __pci_register_driver+0x5b/0x7d <c043beca> sys_init_module+0x1625/0x172b
<c0466f68> do_sync_read+0xb8/0xf3 <c043439c> autoremove_wake_function+0x0/0x2d
<c042bb54> __mod_timer+0x0/0xa5 <c0403cc5> sysenter_past_esp+0x56/0x79
Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet Network Adapter
Driver version:1.03
Released date:2006/05/26
Link Status:Not Linked
I/O Base:0x2000(I/O port)
IRQ:10
PCI: Setting latency timer of device 0000:00:1b.0 to 64
eth0: setting half-duplex.
eth1: link down
hw_random hardware driver 1.0.0 loaded
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 11, io mem 0x902c4000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v3.0
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00003080
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 9, io base 0x00003060
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 10, io base 0x00003040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 11, io base 0x00003020
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 3-2: new low speed USB device using uhci_hcd and address 2
usb 3-2: configuration #1 chosen from 1 choice
input: HID 0566:3002 as /class/input/input1
input: USB HID v1.10 Keyboard [HID 0566:3002] on usb-0000:00:1d.1-2
input: HID 0566:3002 as /class/input/input2
input,hiddev96: USB HID v1.10 Device [HID 0566:3002] on usb-0000:00:1d.1-2
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
loop: loaded (max 8 devices)
EXT3 FS on sda6, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2104472k swap on /dev/sda5. Priority:-1 extents:1 across:2104472k
eth0: setting half-duplex.
ADDRCONF(NETDEV_UP): eth0: link is not ready
eth1: link down
ADDRCONF(NETDEV_UP): eth1: link is not ready
audit(1191400250.404:3): audit_pid=2808 old=0 by auid=4294967295
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.7
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
[drm] Initialized drm 1.0.1 20051102
[drm] Initialized i915 1.4.0 20060119 on minor 0
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
pnp: Device 00:07 disabled.
slamr: module license 'Smart Link Ltd.' taints kernel.
slamr: SmartLink AMRMO modem.
