The Big Shutdown Trouble (Ubuntu Gutsy)

[Ayanami-kun]

Собственно проблема заключается в том, что после шатдауна системы комп не выключается (пишется Power Down и все ноль эмоций - только ресет или пауэр держать 5 секунд)
Нашел такую тему: https://answers.launchpad.net/ubuntu/+question/16914
Сделал так, как там описано, но ничего не изменилось...
Проблема возникла скорее всего после какого-то обновления, поскольку сначала все работало нормально...

[Ayanami-kun]

На ubuntuforums.org нашел несколько возможных решений проблемы, но ни одно не помогло...

[uptime]

Комп то настольный или ноут?

За выключение система acpi отвечает, не могли вы её отключить? А обновляли что? Ядро?

Если ничего не поможет, уберите в биосе задержку и выключайте кнопкой.

[Ayanami-kun]

Ядро не обновлял (вроде бы о_0) - признаюсь, не смотрел, все, что мне Синаптик сказал...
Комп - десктоп...
acpi не отключал (даже написал, как там сказано acpi=force в menu.lst)

[Arti]

да у меня точно такая же проблема возникла. но она возникла после того, как я поставил Wine и запустил квип.

[rm_]

А в процессе завершения работы, какие сообщения выводятся? Нет ли ошибок? Какое сообщение идёт самым последним?

И ещё - выложите вывод dmesg.

[Arti]

Нет, никаких ошибок не выводилось. просто остается экран завершение работы, отключается один из хардов, все остальное продолжает работать

[Ayanami-kun]

Так... Ошибки выдает только network manager такие же, как и описанные на сайте, на который я дал ссылку...

Network Manager: <WARN> nm_hal_deinit(): libhal shutdown failed - Connection is closed

Network Manager: nm_dbus_signal_device_status_change: assertion 'cb_data -> data -> dbus_connection' failed
Network Manager: nm_dbus_signal_device_status_change: assertion 'cb_data -> data -> dbus_connection' failed
(две штуки последняя строчка)
Дальше сообщения типа "Размонтирование файловых систем"
Самое последнее сообщение
Will now halt
за ним
[*тут число с плавающей точкой*]Power down

dmesg:

Код:

[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Dec 18 08:02:57 UTC 2007 (Ubuntu 2.6.22-14.47-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001bfd0000 (usable) [ 0.000000] BIOS-e820: 000000001bfd0000 - 000000001bfde000 (ACPI data) [ 0.000000] BIOS-e820: 000000001bfde000 - 000000001c000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 447MB LOWMEM available. [ 0.000000] found SMP MP-table at 000ff780 [ 0.000000] Entering add_active_range(0, 0, 114640) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 114640 [ 0.000000] HighMem 114640 -> 114640 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 114640 [ 0.000000] On node 0 totalpages: 114640 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 863 pages used for memmap [ 0.000000] Normal zone: 109681 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F9DE0 checksum 0 [ 0.000000] ACPI: RSDP 000F9DE0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 1BFD0000, 0034 (r1 A M I OEMRSDT 7000711 MSFT 97) [ 0.000000] ACPI: FACP 1BFD0200, 0084 (r2 A M I OEMFACP 7000711 MSFT 97) [ 0.000000] ACPI: DSDT 1BFD0440, 51C9 (r1 1AAAA 1AAAA000 0 INTL 2002026) [ 0.000000] ACPI: FACS 1BFDE000, 0040 [ 0.000000] ACPI: APIC 1BFD0390, 006C (r1 A M I OEMAPIC 7000711 MSFT 97) [ 0.000000] ACPI: MCFG 1BFD0400, 003C (r1 A M I OEMMCFG 7000711 MSFT 97) [ 0.000000] ACPI: OEMB 1BFDE040, 0056 (r1 A M I AMI_OEM 7000711 MSFT 97) [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1c000000:e2e00000) [ 0.000000] Built 1 zonelists. Total pages: 113745 [ 0.000000] Kernel command line: root=UUID=ba1d2c65-f0a1-465b-90cb-4af635fea186 ro locale=ru_RU acpi=force apm=power_off [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 1596.051 MHz processor. [ 18.037843] Console: colour VGA+ 80x25 [ 18.039735] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 18.039918] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 18.049427] Memory: 443020k/458560k available (2015k kernel code, 14948k reserved, 916k data, 364k init, 0k highmem) [ 18.049489] virtual kernel memory layout: [ 18.049490] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 18.049492] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 18.049493] vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB) [ 18.049494] lowmem : 0xc0000000 - 0xdbfd0000 ( 447 MB) [ 18.049495] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 18.049496] .data : 0xc02f7de6 - 0xc03dce84 ( 916 kB) [ 18.049498] .text : 0xc0100000 - 0xc02f7de6 (2015 kB) [ 18.049792] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 18.049894] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 18.129892] Calibrating delay using timer specific routine.. 3194.79 BogoMIPS (lpj=6389580) [ 18.129986] Security Framework v1.0.0 initialized [ 18.130026] SELinux: Disabled at boot. [ 18.130074] Mount-cache hash table entries: 512 [ 18.130218] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 [ 18.130225] monitor/mwait feature present. [ 18.130264] using mwait in idle threads. [ 18.130302] CPU: L1 I cache: 32K, L1 D cache: 32K [ 18.130361] CPU: L2 cache: 1024K [ 18.130397] CPU: Physical Processor ID: 0 [ 18.130434] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003140 0000e39d 00000000 00000001 [ 18.130443] Compat vDSO mapped to ffffe000. [ 18.130489] Checking 'hlt' instruction... OK. [ 18.146040] SMP alternatives: switching to UP code [ 18.146479] Early unpacking initramfs... done [ 18.486763] ACPI: Core revision 20070126 [ 18.486847] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 18.500581] CPU0: Intel® Pentium® Dual CPU E2140 @ 1.60GHz stepping 0d [ 18.500679] SMP alternatives: switching to SMP code [ 18.500809] Booting processor 1/1 eip 3000 [ 18.510939] Initializing CPU#1 [ 18.589483] Calibrating delay using timer specific routine.. 3192.23 BogoMIPS (lpj=6384472) [ 18.589490] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 [ 18.589495] monitor/mwait feature present. [ 18.589499] CPU: L1 I cache: 32K, L1 D cache: 32K [ 18.589501] CPU: L2 cache: 1024K [ 18.589503] CPU: Physical Processor ID: 0 [ 18.589505] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003140 0000e39d 00000000 00000001 [ 18.590005] CPU1: Intel® Pentium® Dual CPU E2140 @ 1.60GHz stepping 0d [ 18.590328] Total of 2 processors activated (6387.02 BogoMIPS). [ 18.590507] ENABLING IO-APIC IRQs [ 18.590721] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 18.757337] APIC calibration not consistent with PM Timer: 120ms instead of 100ms [ 18.757388] APIC delta adjusted to PM-Timer: 1246876 (1496343) [ 18.757531] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 18.777589] Brought up 2 CPUs [ 18.897852] migration_cost=64 [ 18.898087] Booting paravirtualized kernel on bare hardware [ 18.898184] Time: 9:20:12 Date: 00/18/108 [ 18.898243] NET: Registered protocol family 16 [ 18.898354] EISA bus registered [ 18.898392] ACPI: bus type pci registered [ 18.898564] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3 [ 18.898604] PCI: Using configuration type 1 [ 18.898641] Setting up standard PCI resources [ 18.904629] mtrr: your CPUs had inconsistent fixed MTRR settings [ 18.904668] mtrr: probably your BIOS does not setup all CPUs. [ 18.904707] mtrr: corrected configuration. [ 18.907897] ACPI: EC: Look up EC in DSDT [ 18.913104] ACPI: Interpreter enabled [ 18.913143] ACPI: (supports S0 S1 S3 S4 S5) [ 18.913324] ACPI: Using IOAPIC for interrupt routing [ 18.920905] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 18.920949] PCI: Probing PCI hardware (bus 00) [ 18.921501] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 18.921543] PCI quirk: region 0480-04bf claimed by ICH6 GPIO [ 18.922027] PCI: Transparent bridge - 0000:00:1e.0 [ 18.922108] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 18.922258] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 18.922345] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 18.922444] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 18.924778] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 18.925196] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 18.925619] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 18.926032] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 18.926445] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 18.926911] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 18.927378] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 18.927846] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 18.928249] Linux Plug and Play Support v0.97 © Adam Belay [ 18.928295] pnp: PnP ACPI init [ 18.928337] ACPI: bus type pnp registered [ 18.931990] pnp: PnP ACPI: found 15 devices [ 18.932027] ACPI: ACPI bus type pnp unregistered [ 18.932066] PnPBIOS: Disabled by ACPI PNP [ 18.932157] PCI: Using ACPI for IRQ routing [ 18.932195] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 18.938524] NET: Registered protocol family 8 [ 18.938562] NET: Registered protocol family 20 [ 18.938660] pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved [ 18.938708] pnp: 00:0a: ioport range 0xa00-0xadf has been reserved [ 18.938748] pnp: 00:0a: ioport range 0xae0-0xaef has been reserved [ 18.938791] pnp: 00:0b: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 18.938832] pnp: 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved [ 18.938874] pnp: 00:0b: iomem range 0xffb80000-0xfffffffe could not be reserved [ 18.938927] pnp: 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved [ 18.938969] pnp: 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved [ 18.939022] pnp: 00:0d: iomem range 0xf0000000-0xf3ffffff has been reserved [ 18.939066] pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 18.939107] pnp: 00:0e: iomem range 0xc0000-0xcffff could not be reserved [ 18.939147] pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 18.939188] pnp: 00:0e: iomem range 0x100000-0x1bffffff could not be reserved [ 18.941271] Time: tsc clocksource has been installed. [ 18.969497] PCI: Bridge: 0000:00:1c.0 [ 18.969533] IO window: disabled. [ 18.969571] MEM window: disabled. [ 18.969609] PREFETCH window: disabled. [ 18.969648] PCI: Bridge: 0000:00:1c.1 [ 18.969685] IO window: c000-cfff [ 18.969723] MEM window: cfc00000-cfcfffff [ 18.969761] PREFETCH window: disabled. [ 18.969800] PCI: Bridge: 0000:00:1e.0 [ 18.969835] IO window: disabled. [ 18.969873] MEM window: disabled. [ 18.969911] PREFETCH window: disabled. [ 18.969970] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 18.970045] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 18.970064] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 18.970137] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 18.970148] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 18.970158] NET: Registered protocol family 2 [ 19.009613] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 19.009693] TCP established hash table entries: 16384 (order: 5, 196608 bytes) [ 19.009877] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 19.009983] TCP: Hash tables configured (established 16384 bind 16384) [ 19.010023] TCP reno registered [ 19.021804] checking if image is initramfs... it is [ 19.473093] Switched to high resolution mode on CPU 0 [ 19.473237] Switched to high resolution mode on CPU 1 [ 19.697018] Freeing initrd memory: 7049k freed [ 19.697407] audit: initializing netlink socket (disabled) [ 19.697460] audit(1200648012.244:1): initialized [ 19.699507] VFS: Disk quotas dquot_6.5.1 [ 19.699591] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 19.699723] io scheduler noop registered [ 19.699759] io scheduler anticipatory registered [ 19.700436] io scheduler deadline registered [ 19.700486] io scheduler cfq registered (default) [ 19.700554] Boot video device is 0000:00:02.0 [ 19.700701] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 19.700743] assign_interrupt_mode Found MSI capability [ 19.700782] Allocate Port Service[0000:00:1c.0:pcie00] [ 19.700821] Allocate Port Service[0000:00:1c.0:pcie02] [ 19.700898] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 19.700939] assign_interrupt_mode Found MSI capability [ 19.700978] Allocate Port Service[0000:00:1c.1:pcie00] [ 19.701006] Allocate Port Service[0000:00:1c.1:pcie02] [ 19.701153] isapnp: Scanning for PnP cards... [ 20.054220] isapnp: No Plug & Play device found [ 20.076357] Real Time Clock Driver v1.12ac [ 20.076510] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 20.076657] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 20.077327] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 20.078106] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 20.078287] input: Macintosh mouse button emulation as /class/input/input0 [ 20.078408] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 20.080583] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 20.080624] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 20.080804] mice: PS/2 mouse device common for all mice [ 20.080938] EISA: Probing bus 0 at eisa.0 [ 20.081003] EISA: Detected 0 cards. [ 20.081129] TCP cubic registered [ 20.081177] NET: Registered protocol family 1 [ 20.081234] Using IPI No-Shortcut mode [ 20.081419] Magic number: 8:544:323 [ 20.081473] hash matches device ttyyc [ 20.081576] hash matches device tty48 [ 20.081786] Freeing unused kernel memory: 364k freed [ 20.099519] input: AT Translated Set 2 keyboard as /class/input/input1 [ 20.256115] AppArmor: AppArmor initialized<5>audit(1200648012.744:2): type=1505 info="AppArmor initialized" pid=1189 [ 20.262103] fuse init (API version 7.8) [ 20.266492] Failure registering capabilities with primary security module. [ 20.304243] ACPI Warning (tbutils-0217): Incorrect checksum in table [SSDT] - C7, should be CE [20070126] [ 20.304348] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - EA, should be E5 [20070126] [ 20.304448] ACPI: SSDT 1BFD5610, 02E3 (r1 AMI CPU1PM 1 INTL 20051117) [ 20.304782] ACPI: SSDT 1BFD5900, 02DA (r1 AMI CPU2PM 1 INTL 20051117) [ 20.305042] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] [ 20.305148] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] [ 20.740510] usbcore: registered new interface driver usbfs [ 20.740579] usbcore: registered new interface driver hub [ 20.740639] usbcore: registered new device driver usb [ 20.741448] USB Universal Host Controller Interface driver v3.0 [ 20.741552] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18 [ 20.741636] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 20.741640] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 20.741824] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 20.741901] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000e880 [ 20.742050] usb usb1: configuration #1 chosen from 1 choice [ 20.742118] hub 1-0:1.0: USB hub found [ 20.742158] hub 1-0:1.0: 2 ports detected [ 20.843802] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 20.843887] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 20.843891] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 20.844060] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 20.844138] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800 [ 20.844501] usb usb2: configuration #1 chosen from 1 choice [ 20.844677] hub 2-0:1.0: USB hub found [ 20.844718] hub 2-0:1.0: 2 ports detected [ 20.851297] SCSI subsystem initialized [ 20.860106] libata version 2.21 loaded. [ 20.947494] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20 [ 20.947588] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 20.947592] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 20.947656] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 20.947733] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000e480 [ 20.947872] usb usb3: configuration #1 chosen from 1 choice [ 20.947942] hub 3-0:1.0: USB hub found [ 20.947984] hub 3-0:1.0: 2 ports detected [ 21.051370] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 21.051470] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 21.051474] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 21.051537] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 21.051613] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400 [ 21.051747] usb usb4: configuration #1 chosen from 1 choice [ 21.051813] hub 4-0:1.0: USB hub found [ 21.051853] hub 4-0:1.0: 2 ports detected [ 21.155790] r8169 Gigabit Ethernet driver 2.2LK loaded [ 21.155863] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 21.155954] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 21.156168] eth0: RTL8168b/8111b at 0xdc81a000, 00:19:db:d2:55:a1, XID 38000000 IRQ 17 [ 21.157588] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18 [ 21.157675] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 21.157679] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 21.157766] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 21.157849] ehci_hcd 0000:00:1d.7: debug port 1 [ 21.157895] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 21.157904] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xcfe3bc00 [ 21.161845] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 21.162026] usb usb5: configuration #1 chosen from 1 choice [ 21.162098] hub 5-0:1.0: USB hub found [ 21.162144] hub 5-0:1.0: 8 ports detected [ 21.265235] ata_piix 0000:00:1f.1: version 2.11 [ 21.265257] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20 [ 21.265376] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 21.265466] scsi0 : ata_piix [ 21.265559] scsi1 : ata_piix [ 21.265710] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14 [ 21.265766] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15 [ 21.554773] usb 5-8: new high speed USB device using ehci_hcd and address 2 [ 21.583076] ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.03, max UDMA/66 [ 21.689131] usb 5-8: configuration #1 chosen from 1 choice [ 21.699509] usbcore: registered new interface driver libusual [ 21.705948] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 21.705999] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 21.707933] Initializing USB Mass Storage driver... [ 21.708051] scsi2 : SCSI emulation for USB Mass Storage devices [ 21.708143] usb-storage: device found at 2 [ 21.708145] usb-storage: waiting for device to settle before scanning [ 21.708158] usbcore: registered new interface driver usb-storage [ 21.708200] USB Mass Storage support registered. [ 21.754903] ata1.00: configured for UDMA/66 [ 21.922573] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55N 1.03 PQ: 0 ANSI: 5 [ 21.922720] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 21.922906] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 21.923007] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 21.923044] scsi3 : ata_piix [ 21.923129] scsi4 : ata_piix [ 21.923270] ata3: SATA max UDMA/133 cmd 0x0001e080 ctl 0x0001e002 bmdma 0x0001d800 irq 19 [ 21.923323] ata4: SATA max UDMA/133 cmd 0x0001dc00 ctl 0x0001d882 bmdma 0x0001d808 irq 19 [ 22.130066] ata3.00: ATA-7: ST380815AS, 3.AAD, max UDMA/133 [ 22.130112] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 22.204956] ata3.00: configured for UDMA/133 [ 22.368797] scsi 3:0:0:0: Direct-Access ATA ST380815AS 3.AA PQ: 0 ANSI: 5 [ 22.378338] sd 3:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 22.378394] sd 3:0:0:0: [sda] Write Protect is off [ 22.378433] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 22.378449] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 22.378555] sd 3:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 22.378604] sd 3:0:0:0: [sda] Write Protect is off [ 22.378642] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 22.378657] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 22.378712] sda:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 22.385971] Uniform CD-ROM driver Revision: 3.20 [ 22.386076] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 22.402736] sda1 sda2 sda3 sda4 < sda5 > [ 22.426837] sd 3:0:0:0: [sda] Attached SCSI disk [ 22.430865] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 22.430932] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 22.686499] Attempting manual resume [ 22.686537] swsusp: Resume From Partition 8:5 [ 22.686539] PM: Checking swsusp image. [ 22.686710] PM: Resume from disk failed. [ 22.703525] ReiserFS: sda1: found reiserfs format "3.6" with standard journal [ 22.703580] ReiserFS: sda1: using ordered data mode [ 22.707673] ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 22.708067] ReiserFS: sda1: checking transaction log (sda1) [ 22.738880] ReiserFS: sda1: Using r5 hash to sort names [ 26.702867] usb-storage: device scan complete [ 26.703490] scsi 2:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 26.704111] scsi 2:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 26.704734] scsi 2:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 26.705357] scsi 2:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 26.706633] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 26.706718] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 26.707747] sd 2:0:0:1: [sdc] Attached SCSI removable disk [ 26.707824] sd 2:0:0:1: Attached scsi generic sg3 type 0 [ 26.708869] sd 2:0:0:2: [sdd] Attached SCSI removable disk [ 26.708954] sd 2:0:0:2: Attached scsi generic sg4 type 0 [ 26.709996] sd 2:0:0:3: [sde] Attached SCSI removable disk [ 26.710074] sd 2:0:0:3: Attached scsi generic sg5 type 0 [ 29.779551] Linux agpgart interface v0.102 © Dave Jones [ 29.808878] agpgart: Detected an Intel 945G Chipset. [ 29.809498] agpgart: Detected 48892K stolen memory. [ 29.822211] agpgart: AGP aperture is 256M @ 0xe0000000 [ 29.864564] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 29.866304] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 29.960121] intel_rng: FWH not detected [ 30.052745] parport_pc 00:07: reported by Plug and Play ACPI [ 30.052832] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 30.211911] input: PC Speaker as /class/input/input2 [ 30.334959] iTCO_vendor_support: vendor-support=0 [ 30.343904] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 30.716432] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 30.716538] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 30.921714] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 30.947671] input: ImExPS/2 Generic Explorer Mouse as /class/input/input3 [ 30.950748] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860) [ 30.950840] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 31.706615] lp0: using parport0 (interrupt-driven). [ 31.731426] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 31.731474] apm: overridden by ACPI. [ 31.775083] Adding 506008k swap on /dev/sda5. Priority:-1 extents:1 across:506008k [ 41.390339] No dock devices found. [ 41.437486] input: Power Button (FF) as /class/input/input4 [ 41.437508] ACPI: Power Button (FF) [PWRF] [ 41.437620] input: Power Button (CM) as /class/input/input5 [ 41.437633] ACPI: Power Button (CM) [PWRB] [ 42.297256] Failure registering capabilities with primary security module. [ 42.493184] ppdev: user-space parallel port driver [ 42.582909] audit(1200648035.832:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5262 profile="/usr/sbin/cupsd" [ 42.585749] r8169: eth0: link up [ 42.585761] r8169: eth0: link up [ 42.769160] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 42.769165] apm: disabled on user request. [ 44.052573] Bluetooth: Core ver 2.11 [ 44.052992] NET: Registered protocol family 31 [ 44.052997] Bluetooth: HCI device and connection manager initialized [ 44.053002] Bluetooth: HCI socket layer initialized [ 44.073524] Bluetooth: L2CAP ver 2.8 [ 44.073530] Bluetooth: L2CAP socket layer initialized [ 44.129089] Bluetooth: RFCOMM socket layer initialized [ 44.129425] Bluetooth: RFCOMM TTY layer initialized [ 44.129431] Bluetooth: RFCOMM ver 1.8 [ 45.834377] [drm] Initialized drm 1.1.0 20060810 [ 45.836524] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 45.836883] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 48.244450] NET: Registered protocol family 17 [ 51.865317] NET: Registered protocol family 10 [ 51.866014] lo: Disabled Privacy Extensions [ 62.559894] eth0: no IPv6 routers present

[Ayanami-kun]

Я знаю, что за ап этой темы будут бить, но просто не хочется слезать с deb-based дистрибутивов на этой машине...
Debian вел себя ужасно(есть подозрение на /dev/hands), Убунту - все нормально, все работает, кроме шатдауна...

Вот там в dmesg в некоторых местах написано acpi disabled

[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)

Может дело в этом?
И если да, то каким образом я могу это исправить?

[unflag]

Нет, за такой ап никто бить не будет;) Вот если бы было написано "ап" и все, тогда да, побили бы=)
Что касается описанной проблемы, то беглый поиск в гугле выдал такую ссылку:
https://bugs.launchpad.net/ubuntu/+bug/152294
Похоже? Почитайте там, может быть есть решение. К сожалению, у меня имеется некоторая нехватка времени, так что дальше поиском заняться не могу. О результатах отпишите тут, пожалуйста:)

[Ayanami-kun]

Hibernation?
А разве это не спящий режим?
Вроде не очень похоже...

[unflag]

Гмм... Мой косяк, прошу прощения

[Ayanami-kun]

Ядро 2.6.24.2 - собрал... Проблема как была, так и осталась...
Модули acpi и apm в ядро включены.

[mishon]

Ядро 2.6.24.2 - собрал... Проблема как была, так и осталась...
Модули acpi и apm в ядро включены.

gnome-session-properties: посмотрите, стоит ли галочка на "управление питанием"? Если - нет, то поставьте.

[Ayanami-kun]

Стоит о_0

[Rosso]

Недавно перешел с Kubuntu amd64 на 386 версию, и появился этот глюк! Не выключается, не перезагрузается и сеанс не завершает; на определенном этапе черный экран, и все(((
самое странное, что sudo halt и sudo reboot выключают и перезагружают систему соответсвенно.
может какие то проблемы с правами???

[Rosso]

УРА! Свою проблему решил! если у тебя карточка ati и драйвер fglrx то и тебе должно помочь

Нашел свою проблему здесь http://wiki.cchtml.com/index.php/Troublesh...i-00000013-QINU

Все делал по инструкции, а именно
1. в ядре acpi=force
2. если GDM, то в /etc/gdm/gdm.conf, добавляем строчку AlwaysRestartServer=true
если KDM то в файле /etc/kde3/kdm/kdmrc во вкладке [X-:*-Core] добавляем строчку TerminateServer=true
3. выполняем следующее
sudo /usr/sbin/update-rc.d -f atieventsd remove
я сделал все это вместе, так что возможно поможет и в раздельности) но факт остается фактом, работает))

[Ayanami-kun]

Гм у меня ситуация совсем другая: питание не отключается даже из single mode

[Ayanami-kun]

Неужели никто ничего не может сказать?

Я уже и ядро пересобирал несколько раз играясь с acpi, все равно одна хрень...

Так... похоже получилось...
Нашел в БИОСе какую-то опцию с каментом "дизэйблед фор ВыньХР", задизэйблил, и после этого убунта зашатдаунилась из синглмода с выключением питания....

[SergeyIT]

Неужели никто ничего не может сказать?

Тоже самое было на моей старой машине (PIII 450 МГц) и в Suse и в Ubuntu.
Добавил
acpi=force в menu.lst
apm power_off=1 в modules
и все заработало.

[Ayanami-kun]

Все, все уже решил... Ацпи=форс не работало, пока я не подкрутил биос.