заводятся ли они хотя бы под одним дистрибутивом "автоматически" ???
или при простой установкой "дров", а не компиляцией и "танцев с бубном под луной"
пробовал: мандриву, сюзи, федору, убунту, линукс ХР ..... и т.д. и т.п. ...
P.S. и не надо мне предлагать купить другой модем (под виндой они пашут отлично),
или перейти на "другой тип инета"... меня устраивает ~ 5Кбайт/сек, ~400Мбайт/сутки , ~12Гбайт/месяц
меня это устраивает вполне!!! и всего за каких то 3$ в месяц (общая сума платы за телефон и инет!!!)
!!! ОГРОМНЕЙШАЯ ПРОСЬБА ПОМОЧЬ !!!
(кому не сложно и не лень)
просто очень хочется начать работать под линуксом, а без инета
Последняя попытка была в SUSE 10.3
(описание в конфиге трех разных модемов)
№1
67: udi = '/org/freedesktop/Hal/devices/pci_11c1_48c'
pci.product = 'V.92 56K WinModem'
pci.subsys_vendor = 'Agere Systems'
info.bus = 'pci'
pci.device_protocol = 0 (0x0)
info.udi = '/org/freedesktop/Hal/devices/pci_11c1_48c'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:06:03.0'
pci.subsys_product_id = 1100 (0x44c)
linux.subsystem = 'pci'
info.vendor = 'Agere Systems'
info.subsystem = 'pci'
pci.product_id = 1164 (0x48c)
pci.vendor = 'Agere Systems'
info.product = 'V.92 56K WinModem'
linux.hotplug_type = 2 (0x2)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:06:03.0'
pci.vendor_id = 4545 (0x11c1)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_244e'
pci.subsys_vendor_id = 4545 (0x11c1)
pci.device_class = 7 (0x7)
pci.device_subclass = 128 (0x80)
type 0x0a [0x003b]: 0a 06 3b 00 01 01
str1: "Agere 1394 Controller"
On Board Devices: #59
Other: "Agere 1394 Controller" (disabled)
32: PCI 603.0: 0780 Communication controller
[Created at pci.301]
UDI: /org/freedesktop/Hal/devices/pci_11c1_48c
Unique ID: 7p19.2OImT7beh+4
Parent ID: 6NW+.OG+Sv+NxnRB
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:06:03.0
SysFS BusID: 0000:06:03.0
Hardware Class: unknown
Model: "Agere V.92 56K WinModem"
Vendor: pci 0x11c1 "Agere Systems"
Device: pci 0x048c "V.92 56K WinModem"
SubVendor: pci 0x11c1 "Agere Systems"
SubDevice: pci 0x044c
Revision: 0x03
Memory Range: 0xf9b00000-0xf9b000ff (rw,non-prefetchable)
I/O Ports: 0xbc00-0xbc07 (rw)
I/O Ports: 0xb800-0xb8ff (rw)
IRQ: 10 (no events)
Module Alias: "pci:v000011C1d0000048Csv000011C1sd0000044Cbc07sc80i00"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #26 (PCI bridge)
_______________________________________________________________________
№2
66: udi = '/org/freedesktop/Hal/devices/pci_11c1_458'
pci.product = 'LT WinModem'
pci.subsys_vendor = 'Agere Systems'
info.bus = 'pci'
pci.device_protocol = 0 (0x0)
info.udi = '/org/freedesktop/Hal/devices/pci_11c1_458'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:06:03.0'
pci.subsys_product_id = 1088 (0x440)
linux.subsystem = 'pci'
info.vendor = 'Agere Systems'
info.subsystem = 'pci'
pci.product_id = 1112 (0x458)
pci.vendor = 'Agere Systems'
info.product = 'LT WinModem'
linux.hotplug_type = 2 (0x2)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:06:03.0'
pci.vendor_id = 4545 (0x11c1)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_244e'
pci.subsys_vendor_id = 4545 (0x11c1)
pci.device_class = 7 (0x7)
pci.device_subclass = 128 (0x80)
type 0x0a [0x003b]: 0a 06 3b 00 01 01
str1: "Agere 1394 Controller"
On Board Devices: #59
Other: "Agere 1394 Controller" (disabled)
32: PCI 603.0: 10203 LinModem
[Created at pci.301]
UDI: /org/freedesktop/Hal/devices/pci_11c1_458
Unique ID: 7p19.6AfaSJvw8d2
Parent ID: 6NW+.OG+Sv+NxnRB
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:06:03.0
SysFS BusID: 0000:06:03.0
Hardware Class: modem
Model: "Agere LT WinModem"
Vendor: pci 0x11c1 "Agere Systems"
Device: pci 0x0458 "LT WinModem"
SubVendor: pci 0x11c1 "Agere Systems"
SubDevice: pci 0x0440
Device File: /dev/ttyLT0
Device Number: char 62:64
Memory Range: 0xf9b00000-0xf9b000ff (rw,non-prefetchable)
I/O Ports: 0xbc00-0xbc07 (rw)
I/O Ports: 0xb800-0xb8ff (rw)
IRQ: 10 (no events)
Module Alias: "pci:v000011C1d00000458sv000011C1sd00000440bc07sc80i00"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #26 (PCI bridge)
________________________________________________________________________
№3
67: udi = '/org/freedesktop/Hal/devices/pci_11c1_48c'
pci.product = 'V.92 56K WinModem'
pci.subsys_vendor = 'Agere Systems'
info.bus = 'pci'
pci.device_protocol = 0 (0x0)
info.udi = '/org/freedesktop/Hal/devices/pci_11c1_48c'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:06:03.0'
pci.subsys_product_id = 1100 (0x44c)
linux.subsystem = 'pci'
info.vendor = 'Agere Systems'
info.subsystem = 'pci'
pci.product_id = 1164 (0x48c)
pci.vendor = 'Agere Systems'
info.product = 'V.92 56K WinModem'
linux.hotplug_type = 2 (0x2)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:06:03.0'
pci.vendor_id = 4545 (0x11c1)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_244e'
pci.subsys_vendor_id = 4545 (0x11c1)
pci.device_class = 7 (0x7)
pci.device_subclass = 128 (0x80)
type 0x0a [0x003b]: 0a 06 3b 00 01 01
str1: "Agere 1394 Controller"
On Board Devices: #59
Other: "Agere 1394 Controller" (disabled)
32: PCI 603.0: 0780 Communication controller
[Created at pci.301]
UDI: /org/freedesktop/Hal/devices/pci_11c1_48c
Unique ID: 7p19.XZwgwC9fay0
Parent ID: 6NW+.OG+Sv+NxnRB
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:06:03.0
SysFS BusID: 0000:06:03.0
Hardware Class: unknown
Model: "Agere V.92 56K WinModem"
Vendor: pci 0x11c1 "Agere Systems"
Device: pci 0x048c "V.92 56K WinModem"
SubVendor: pci 0x11c1 "Agere Systems"
SubDevice: pci 0x044c
Revision: 0x02
Memory Range: 0xf9b00000-0xf9b000ff (rw,non-prefetchable)
I/O Ports: 0xbc00-0xbc07 (rw)
I/O Ports: 0xb800-0xb8ff (rw)
IRQ: 10 (no events)
Module Alias: "pci:v000011C1d0000048Csv000011C1sd0000044Cbc07sc80i00"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #26 (PCI bridge)
___________________________________________________________________