глюки KPPP

[Bor1]

Kubuntu 7.04 с LIVE-CD. Modem-- Siemens M55 через шнур порт USB0.
KPPP пишет

ATZ
OK
AT+CGDCONT=1,"IP","internet.beeline.ru"
OK
ATM0L0
ERROR

т.е. "настройка громкости динамика модема"

и виснет.

Что делать?

[*Sasha*]

а что в это время пишет tail -f /var/log/messages

[jabx]

я выход в инет у себя настраивал через sudo pppd call имя_скрипта
все работало стабильно, и инфа в терминале вся выдается.

вот нашел ссылку на статью

[Bor1]

а что в это время пишет tail -f /var/log/messages

root@bor1-desktop:~# tail -f /var/log/messages
Feb 13 21:11:42 bor1-desktop kernel: [ 536.633022] apm: overridden by ACPI.
Feb 13 21:11:43 bor1-desktop kernel: [ 537.482997] Bluetooth: L2CAP ver 2.8
Feb 13 21:11:43 bor1-desktop kernel: [ 537.483006] Bluetooth: L2CAP socket layer initialized
Feb 13 21:11:43 bor1-desktop kernel: [ 537.627075] Bluetooth: RFCOMM socket layer initialized
Feb 13 21:11:43 bor1-desktop kernel: [ 537.627579] Bluetooth: RFCOMM TTY layer initialized
Feb 13 21:11:43 bor1-desktop kernel: [ 537.627593] Bluetooth: RFCOMM ver 1.8
Feb 13 21:11:45 bor1-desktop kernel: [ 539.327865] dvb_net: created network interface dvb0_0
Feb 13 21:31:32 bor1-desktop -- MARK --
Feb 13 21:51:34 bor1-desktop -- MARK --
Feb 13 21:58:52 bor1-desktop exiting on signal 15

а вот dmesg | grep -i usb

[ 37.522737] usbcore: registered new interface driver usbserial
[ 37.522954] drivers/usb/serial/usb-serial.c: USB Serial support registered fo r generic
[ 37.663940] usbcore: registered new interface driver usbserial_generic
[ 37.664030] drivers/usb/serial/usb-serial.c: USB Serial Driver core
[ 37.781981] drivers/usb/serial/usb-serial.c: USB Serial support registered fo r ark3116
[ 37.832353] usb 1-2: ark3116 converter now attached to ttyUSB0
[ 37.832462] usbcore: registered new interface driver ark3116
[ 112.769689] drivers/usb/serial/ark3116.c: can't set 0 baud, using 9600 instea d
[ 127.508146] drivers/usb/serial/ark3116.c: can't set 0 baud, using 9600 instea d
[ 291.496844] drivers/usb/serial/ark3116.c: can't set 0 baud, using 9600 instea d
[ 312.335455] drivers/usb/serial/ark3116.c: can't set 0 baud, using 9600 instead

[Bor1]

Прошу прощения при очередной попытке соединение получилось
а вот
[ 38.566693] usbcore: registered new interface driver usbserial
[ 38.566875] drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
[ 38.731902] usbcore: registered new interface driver usbserial_generic
[ 38.731993] drivers/usb/serial/usb-serial.c: USB Serial Driver core
[ 38.760493] drivers/usb/serial/usb-serial.c: USB Serial support registered for ark3116
[ 38.808843] usb 1-2: ark3116 converter now attached to ttyUSB0
[ 38.808953] usbcore: registered new interface driver ark3116

потом связь прервалась и опять драйвера не видит

Вопрос: кто глючит

[Bor1]

я выход в инет у себя настраивал через sudo pppd call имя_скрипта
все работало стабильно, и инфа в терминале вся выдается.

вот нашел ссылку на статью

Попробовал по этой инструкции

root@bor1-desktop:~# pppd call mega
^@AT
OK
ATE1
OK
AT+cgdcont=1,"IP","internet.beeline,ru"
OK
Serial connection established.
using channel 1
Using interface ppp0
Connect: ppp0 <--> /dev/ttyUSB0
rcvd [LCP ConfReq id=0x3 <asyncmap 0xa0000> <pcomp> <accomp> <magic 0x3e28206e>
<auth chap MD5>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xf0f38d07> <pcomp> <accomp>]
No auth is possible
sent [LCP ConfRej id=0x3 <auth chap MD5>]
rcvd [LCP ConfNak id=0x1 <asyncmap 0xa0000>]
sent [LCP ConfReq id=0x2 <asyncmap 0xa0000> <magic 0xf0f38d07> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x5 <asyncmap 0xa0000> <pcomp> <accomp> <magic 0x3e28206e>
<auth pap>]
No auth is possible
sent [LCP ConfRej id=0x5 <auth pap>]
rcvd [LCP ConfAck id=0x2 <asyncmap 0xa0000> <magic 0xf0f38d07> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x7 <asyncmap 0xa0000> <pcomp> <accomp> <magic 0x3e28206e>]
sent [LCP ConfAck id=0x7 <asyncmap 0xa0000> <pcomp> <accomp> <magic 0x3e28206e>]
sent [LCP EchoReq id=0x0 magic=0xf0f38d07]
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <
ms-dns3 0.0.0.0>]
rcvd [LCP EchoRep id=0x0 magic=0x3e28206e]
rcvd [IPCP ConfReq id=0x1 <addr 192.168.254.254>]
sent [IPCP ConfAck id=0x1 <addr 192.168.254.254>]
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <
ms-dns3 0.0.0.0>]
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> < ms-dns3 0.0.0.0>]
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> < ms-dns3 0.0.0.0>]
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> < ms-dns3 0.0.0.0>]
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> < ms-dns3 0.0.0.0>]
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> < ms-dns3 0.0.0.0>]
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> < ms-dns3 0.0.0.0>]
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> < ms-dns3 0.0.0.0>]
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> < ms-dns3 0.0.0.0>]
sent [LCP EchoReq id=0x1 magic=0xf0f38d07]
IPCP: timeout sending Config-Requests
sent [LCP TermReq id=0x3 "No network protocols running"]
sent [LCP TermReq id=0x4 "No network protocols running"]
Connection terminated.
Modem hangup

Не получается

[Bor1]

Решено !!! Купил другой USB-кабель ( на другом чипе) и все заработало.
ARK-3116 глючит в Linux.