проблема при сборке KDE (- kde-base/kdebase-3.5.8-r6 (masked by: corruption))

[Alex-X]

не могу установить KDE
extensa / # cat /etc/make.conf

Код: Выделить всё

CHOST="i686-pc-linux-gnu"
CFLAGS="-march=pentium4 -O2 -pipe -fomit-frame-pointer"
CXXFLAGS="${CFLAGS}"
VIDEO_CARDS="i810 vesa"
ALSA_CARDS="hda-intel"
LINGUAS="ru en"
USE="-gtk -gnome X qt kde dvd alsa cdr dbus bluetooth hal iconv ieee1394 mplayer ogg oggvorbis pcmcia pda wmf xine xinerama xvid win32codecs mp3 opengl vlc mpeg vorbis alsa oss"

GENTOO_MIRRORS="http://217.196.165.90/os/gentoo"
SYNC="rsync://217.196.165.90/gentoo-portage"

Помогите плиз с решением такой траблы :

extensa / # emerge kdebase kdenetwork kdeadmin

Код: Выделить всё

Calculating dependencies -!!! Digest verification failed:
!!! /usr/portage/sys-devel/gcc/gcc-4.2.3.ebuild
!!! Reason: Filesize does not match recorded size
!!! Got: 1803
!!! Expected: 1837
 -!!! A file is not listed in the Manifest: '/usr/portage/kde-base/kdebase/kdebase-4.0.1.ebuild'
!!! A file is not listed in the Manifest: '/usr/portage/kde-base/kdebase/kdebase-4.0.1.ebuild'
!!! A file is not listed in the Manifest: '/usr/portage/kde-base/kdebase/kdebase-4.0.1.ebuild'

!!! All ebuilds that could satisfy "kde-base/kdebase" have been masked.
!!! One of the following masked packages is required to complete your request:
- kde-base/kdebase-4.0.1 (masked by: corruption)
- kde-base/kdebase-3.5.9-r1 (masked by: corruption)
- kde-base/kdebase-3.5.9 (masked by: ~x86 keyword)
- kde-base/kdebase-3.5.8-r6 (masked by: corruption)

For more information, see MASKED PACKAGES section in the emerge man page or
refer to the Gentoo Handbook.

+ также не могу собрать gnome xfce4 bcm43-fwcutter & etc (masked by: ~x86 keyword)

[Палач]

но Вы же сами перечислили:

Digest verification failed:
!!! /usr/portage/sys-devel/gcc/gcc-4.2.3.ebuild
!!! Reason: Filesize does not match recorded size

Здесь вообще не пойму:

!!! A file is not listed in the Manifest: '/usr/portage/kde-base/kdebase/kdebase-4.0.1.ebuild'

не забыли случаем ebuild /usr/portage/kde-base/kdebase/kdebase-4.0.1.ebuild digest сделать?

[Alex-X]

сделал :

Код: Выделить всё

ebuild /usr/portage/kde-base/kdebase/kdebase-4.0.1.ebuild digest
ebuild /usr/portage/sys-devel/gcc/gcc-4.2.3.ebuild digest
ebuild /usr/portage/kde-base/kdebase-pam/kdebase-pam-7.ebuild digest

дальше делаю
emerge kdebase kdenetwork kdeadmin

Код: Выделить всё

Calculating dependencies... done!
[ebuild  N    ] dev-libs/libgpg-error-1.6  USE="nls"

*****
[ebuild  N    ] kde-base/kdeadmin-3.5.8  USE="xinerama -arts -debug -kdeenablefinal -kdehiddenvisibility"
[blocks B     ] <sys-fs/udev-115-r1 (is blocking sys-fs/device-mapper-1.02.22-r5) <<<<< уже понял

 * Error: The above package list contains packages which cannot be
 * installed at the same time on the same system.

For more information about Blocked Packages, please refer to the following
section of the Gentoo Linux x86 Handbook (architecture is irrelevant):

http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?full=1#blocked

[Cianos]

и что же вас смущает? английским по белому написано все ....

[serzh-z]

Когда-то я работал эникейшиком, и ко мне очень часто любила прибегать одна тётенька-экономистка с фразой "У меня там,. хи-хи,.. Эксель,.. хи-хи,.. что-то спрашивает... Посмотришь?". В следствии чего приходилось тащиться в её кабинет и в диалоге с вопросом в стиле "В принтере закончилась бумага, вставьте бумагу. Повторить печать?" нажимать кнопку "Да". Так вот, я всегда удивлялся - почему человек, старший экономист, с ВО, целыми днями работающая с этим своим "Экселем", так делает - она просто вообще не хотела думать, хотела сбросить лишний вес, бегая через всю контору в серверную, или считала, что читать сообщения программы, с которой она работает, это не работа экономиста, и читать сообщения системы, а так же думать, за неё должен "программист"...

К чему это я? В очередной раз хотелось бы посоветовать заняться чем-нибудь другим - ну там выбрать другой дистрибутив, или пойти чинить кондиционеры, ну или там, в менеджеры пойти, в телефонисты - чинить телефоны в службе поддержки какой-нибудь, которая занимается расшифровкой сообщений для пользователей, раз уж нет желания прочитать даже то, что написано на экране...

* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.

For more information about Blocked Packages, please refer to the following
section of the Gentoo Linux x86 Handbook (architecture is irrelevant):

http://www.gentoo.org/doc/en/handbook/hand...?full=1#blocked

Список пакетов выше содержит пакеты, которые не могут быть установлены в системе одновременно. В данном случае этими пакетами являются udev и device-mapper.

А может быть на форуме просто не хватает раздела "Перевод"?

[zh0rzh]

А может быть на форуме просто не хватает раздела "Перевод"?

Это Вы в точку!
Либо на первой странице вместо бывшей фразы про ламера вывесить "Прежде чем устанавливать Линукс выучите английский язык до уровня intermediate!".

[vah]

ужли, если локаль русскую поставить, то оно само не переведётся?

[Sekta-N]

Nein
corruption он и в африке corruption.

[Alex-X]

да - завтык и лень

-----------------------------------
но вот снова трабла :
хочу собрать bcm43xx-fwcutter
extensa / # ebuild /usr/portage/net-wireless/bcm43xx-fwcutter/bcm43xx-fwcutter-005.ebuild digest

Код: Выделить всё

>>> Creating Manifest for /usr/portage/net-wireless/bcm43xx-fwcutter
  digest.assumed                 2
   digest-bcm43xx-fwcutter-005::bcm43xx-fwcutter-005.tar.bz2
   digest-bcm43xx-fwcutter-006::bcm43xx-fwcutter-006.tar.bz2

extensa / # emerge -av bcm43xx-fwcutter

Код: Выделить всё

These are the packages that would be merged, in order:
Calculating dependencies /
!!! All ebuilds that could satisfy "net-wireless/bcm43xx-fwcutter" have been masked.
!!! One of the following masked packages is required to complete your request:
- net-wireless/bcm43xx-fwcutter-006 (masked by: ~x86 keyword)
- net-wireless/bcm43xx-fwcutter-005 (masked by: ~x86 keyword)
For more information, see MASKED PACKAGES section in the emerge man page or
refer to the Gentoo Handbook.

а с KDE 3.5.8 там свои цырки - сейчас буду добивать, а то жалуеться

extensa / # emerge -av kdelibs

Код: Выделить всё

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild  N    ] kde-base/kdelibs-3.5.8-r3  USE="acl alsa cups utempter xinerama -arts -avahi -bindist -branding -debug -doc -fam -jpeg2k -kdeenablefinal -kdehiddenvisibility -kerberos -legacyssl -lua -openexr -spell -tiff" 0 kB

Total: 1 package (1 new), Size of downloads: 0 kB

Would you like to merge these packages? [Yes/No] Yes
>>> Verifying ebuild Manifests...

***

checking for Qt... configure: error: Qt (>= Qt 3.3 and < 4.0) (headers and libraries) not found. Please check your installation!
For more details about this problem, look at the end of config.log.
!!! Please attach the following file when seeking support:
!!! /var/tmp/portage/kde-base/kdelibs-3.5.8-r3/work/kdelibs-3.5.8/config.log
 *
 * ERROR: kde-base/kdelibs-3.5.8-r3 failed.
 * Call stack:
 *               ebuild.sh, line   49:  Called src_compile
 *             environment, line 4204:  Called kde_src_compile
 *             environment, line 2889:  Called kde_src_compile 'src_compile'
 *             environment, line 3010:  Called kde_src_compile 'src_compile' 'all' 'myconf'
 *             environment, line 2997:  Called econf 'configure' 'make' '--with-distribution=Gentoo' '--disable-fast-malloc' '--with-libart' '--with-libidn' '--with-ssl' '--without-hspell' '--disable-libfam' '--enable-dnotify' '--with-acl' '--with-alsa' '--without-arts' '--enable-cups' '--without-gssapi' '--without-tiff' '--without-jasper' '--without-openexr' '--with-utempter' '--without-lua' '--enable-sendfile' '--enable-mitshm' '--without-aspell' '--enable-dnssd' '--with-rgbfile=/usr/share/X11/rgb.txt' '--with-x' '--enable-mitshm' '--with-xinerama' '--with-qt-dir=/usr/lib/qt3' '--enable-mt' '--with-qt-libraries=/usr/lib/qt3/lib' '--disable-dependency-tracking' '--disable-debug' '--without-debug' '--disable-final' '--without-arts' '--prefix=/usr/kde/3.5' '--mandir=/usr/kde/3.5/share/man' '--infodir=/usr/kde/3.5/share/info'
 *               ebuild.sh, line  513:  Called die
 * The specific snippet of code:
 *                      die "econf failed"
 *  The die message:
 *   econf failed
 *
 * If you need support, post the topmost build error, and the call stack if relevant.
 * A complete build log is located at '/var/tmp/portage/kde-base/kdelibs-3.5.8-r3/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/kde-base/kdelibs-3.5.8-r3/temp/environment'.
 *
 * Messages for package kde-base/kdelibs-3.5.8-r3:
 *
 * ERROR: kde-base/kdelibs-3.5.8-r3 failed.
 * Call stack:
 *               ebuild.sh, line   49:  Called src_compile
 *             environment, line 4204:  Called kde_src_compile
 *             environment, line 2889:  Called kde_src_compile 'src_compile'
 *             environment, line 3010:  Called kde_src_compile 'src_compile' 'all' 'myconf'
 *             environment, line 2997:  Called econf 'configure' 'make' '--with-distribution=Gentoo' '--disable-fast-malloc' '--with-libart' '--with-libidn' '--with-ssl' '--without-hspell' '--disable-libfam' '--enable-dnotify' '--with-acl' '--with-alsa' '--without-arts' '--enable-cups' '--without-gssapi' '--without-tiff' '--without-jasper' '--without-openexr' '--with-utempter' '--without-lua' '--enable-sendfile' '--enable-mitshm' '--without-aspell' '--enable-dnssd' '--with-rgbfile=/usr/share/X11/rgb.txt' '--with-x' '--enable-mitshm' '--with-xinerama' '--with-qt-dir=/usr/lib/qt3' '--enable-mt' '--with-qt-libraries=/usr/lib/qt3/lib' '--disable-dependency-tracking' '--disable-debug' '--without-debug' '--disable-final' '--without-arts' '--prefix=/usr/kde/3.5' '--mandir=/usr/kde/3.5/share/man' '--infodir=/usr/kde/3.5/share/info'
 *               ebuild.sh, line  513:  Called die
 * The specific snippet of code:
 *                      die "econf failed"
 *  The die message:
 *   econf failed
 *
 * If you need support, post the topmost build error, and the call stack if relevant.
 * A complete build log is located at '/var/tmp/portage/kde-base/kdelibs-3.5.8-r3/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/kde-base/kdelibs-3.5.8-r3/temp/environment'.
 *

Qt собрал нормально, но всеравно - траблы

Код: Выделить всё

checking for Qt... configure: error: Qt (>= Qt 3.3 and < 4.0) (headers and libraries) not found. Please check your installation!

[Nirdosh]

* A complete build log is located at '/var/tmp/portage/kde-base/kdelibs-3.5.8-r3/temp/build.log читал?

[Cianos]

Qt собрал нормально

это замечательно, а версия какая?

[Alex-X]

это замечательно, а версия какая?

qt-4.3.4
-----------------------

* A complete build log is located at '/var/tmp/portage/kde-base/kdelibs-3.5.8-r3/temp/build.log читал?

extensa / # cat /var/tmp/portage/kde-base/kdelibs-3.5.8-r3/temp/build.log

Код: Выделить всё

>>> Unpacking source...
>>> Unpacking kdelibs-3.5.8.tar.bz2 to /var/tmp/portage/kde-base/kdelibs-3.5.8-r3/work
>>> Unpacking kdelibs-3.5-patchset-14.tar.bz2 to /var/tmp/portage/kde-base/kdelibs-3.5.8-r3/work
>>> Unpacking kdelibs-3.5.8-seli-xinerama.patch.bz2 to /var/tmp/portage/kde-base/kdelibs-3.5.8-r3/work
 * Applying kdelibs-3.5.8-bsd_startkde.patch ...                          [ ok ]
 * Applying kdelibs-3.5.8-http-slave.patch ...                            [ ok ]
 * Applying kdelibs-3.5.8-misc_post_358_fixes.patch ...                   [ ok ]
 * Applying kdelibs-3.5.8-newer-flash-compatibility.patch ...

[quadrik]

>= Qt 3.3 and < 4.0

qt-4.3.4 никак не попадает в этот диапазон

[Alex-X]

Не помогает

Код: Выделить всё

****
checking for libjpeg6b... no
checking for libjpeg... -ljpeg
checking for perl... /usr/bin/perl
checking for Qt... configure: error: Qt (>= Qt 3.3 and < 4.0) (headers and libraries) not found. Please check your installation!
For more details about this problem, look at the end of config.log.

!!! Please attach the following file when seeking support:
!!! /var/tmp/portage/kde-base/kdelibs-3.5.8-r3/work/kdelibs-3.5.8/config.log
 *
 * ERROR: kde-base/kdelibs-3.5.8-r3 failed.
 * Call stack:
 *               ebuild.sh, line   49:  Called src_compile
 *             environment, line 4204:  Called kde_src_compile
 *             environment, line 2889:  Called kde_src_compile 'src_compile'
 *             environment, line 3010:  Called kde_src_compile 'src_compile' 'all' 'myconf'
 *             environment, line 2997:  Called econf 'configure' 'make' '--with-distribution=Gentoo' '--disable-fast-malloc' '--with-libart' '--with-libidn' '--with-ssl' '--without-hspell' '--disable-libfam' '--enable-dnotify' '--with-acl' '--with-alsa' '--without-arts' '--enable-cups' '--without-gssapi' '--without-tiff' '--without-jasper' '--without-openexr' '--with-utempter' '--without-lua' '--enable-sendfile' '--enable-mitshm' '--without-aspell' '--enable-dnssd' '--with-rgbfile=/usr/share/X11/rgb.txt' '--with-x' '--enable-mitshm' '--with-xinerama' '--with-qt-dir=/usr/lib/qt3' '--enable-mt' '--with-qt-libraries=/usr/lib/qt3/lib' '--disable-dependency-tracking' '--disable-debug' '--without-debug' '--disable-final' '--without-arts' '--prefix=/usr/kde/3.5' '--mandir=/usr/kde/3.5/share/man' '--infodir=/usr/kde/3.5/share/info'
 *               ebuild.sh, line  513:  Called die
 * The specific snippet of code:
 *                      die "econf failed"
 *  The die message:
 *   econf failed
 *
 * If you need support, post the topmost build error, and the call stack if relevant.
 * A complete build log is located at '/var/tmp/portage/kde-base/kdelibs-3.5.8-r3/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/kde-base/kdelibs-3.5.8-r3/temp/environment'.
 *

 * Messages for package x11-libs/qt-3.3.8-r4:

 * After a rebuild of Qt, it can happen that Qt plugins (such as Qt/KDE styles,
 * or widgets for the Qt designer) are no longer recognized.  If this situation
 * occurs you should recompile the packages providing these plugins,
 * and you should also make sure that Qt and its plugins were compiled with the
 * same version of gcc.  Packages that may need to be rebuilt are, for instance,
 * kde-base/kdelibs, kde-base/kdeartwork and kde-base/kdeartwork-styles.
 * See http://doc.trolltech.com/3.3/plugins-howto.html for more infos.

 * Messages for package kde-base/kdelibs-3.5.8-r3:

 *
 * ERROR: kde-base/kdelibs-3.5.8-r3 failed.
 * Call stack:
 *               ebuild.sh, line   49:  Called src_compile
 *             environment, line 4204:  Called kde_src_compile
 *             environment, line 2889:  Called kde_src_compile 'src_compile'
 *             environment, line 3010:  Called kde_src_compile 'src_compile' 'all' 'myconf'
 *             environment, line 2997:  Called econf 'configure' 'make' '--with-distribution=Gentoo' '--disable-fast-malloc' '--with-libart' '--with-libidn' '--with-ssl' '--without-hspell' '--disable-libfam' '--enable-dnotify' '--with-acl' '--with-alsa' '--without-arts' '--enable-cups' '--without-gssapi' '--without-tiff' '--without-jasper' '--without-openexr' '--with-utempter' '--without-lua' '--enable-sendfile' '--enable-mitshm' '--without-aspell' '--enable-dnssd' '--with-rgbfile=/usr/share/X11/rgb.txt' '--with-x' '--enable-mitshm' '--with-xinerama' '--with-qt-dir=/usr/lib/qt3' '--enable-mt' '--with-qt-libraries=/usr/lib/qt3/lib' '--disable-dependency-tracking' '--disable-debug' '--without-debug' '--disable-final' '--without-arts' '--prefix=/usr/kde/3.5' '--mandir=/usr/kde/3.5/share/man' '--infodir=/usr/kde/3.5/share/info'
 *               ebuild.sh, line  513:  Called die
 * The specific snippet of code:
 *                      die "econf failed"
 *  The die message:
 *   econf failed
 *
 * If you need support, post the topmost build error, and the call stack if relevant.
 * A complete build log is located at '/var/tmp/portage/kde-base/kdelibs-3.5.8-r3/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/kde-base/kdelibs-3.5.8-r3/temp/environment'.
 *
 * GNU info directory index is up-to-date.

qt-3.3.8-r4
установилась вроде без трабл

[Палач]

If this situation
* occurs you should recompile the packages providing these plugins,
* and you should also make sure that Qt and its plugins were compiled with the
* same version of gcc. Packages that may need to be rebuilt are, for instance,
* kde-base/kdelibs, kde-base/kdeartwork and kde-base/kdeartwork-styles.
* See http://doc.trolltech.com/3.3/plugins-howto.html

без комментариев.