Зависание иксов.

[gabell]

Здраствуйте. Такая проблема. Система виснет намертво в случайный момент времени. Посмотрите пожалуйста.
dmesg

Код:

Linux version 2.6.25-ARCH (root@architect) (gcc version 4.3.0 (GCC) ) #1 SMP PREEMPT Fri May 16 14:52:43 CEST 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001bfc0000 (usable) BIOS-e820: 000000001bfc0000 - 000000001bfce000 (ACPI data) BIOS-e820: 000000001bfce000 - 000000001bff0000 (ACPI NVS) BIOS-e820: 000000001bff0000 - 000000001c000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 447MB LOWMEM available. Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. found SMP MP-table at [c00ff780] 000ff780 Entering add_active_range(0, 0, 114624) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 114624 HighMem 114624 -> 114624 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 114624 On node 0 totalpages: 114624 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 863 pages used for memmap Normal zone: 109665 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap Movable zone: 0 pages used for memmap DMI present. ACPI: RSDP 000FBB40, 0014 (r0 ACPIAM) ACPI: RSDT 1BFC0000, 003C (r1 _ASUS_ Notebook 2000705 MSFT 97) ACPI: FACP 1BFC0200, 0084 (r2 A_M_I_ OEMFACP 2000705 MSFT 97) ACPI: DSDT 1BFC05C0, 6D77 (r1 A0502 A0502000 0 INTL 20060113) ACPI: FACS 1BFCE000, 0040 ACPI: APIC 1BFC0390, 0070 (r1 A_M_I_ OEMAPIC 2000705 MSFT 97) ACPI: MCFG 1BFC0400, 003C (r1 A_M_I_ OEMMCFG 2000705 MSFT 97) ACPI: SLIC 1BFC0440, 0176 (r1 _ASUS_ Notebook 2000705 MSFT 97) ACPI: OEMB 1BFCE040, 0060 (r1 A_M_I_ AMI_OEM 2000705 MSFT 97) ACPI: HPET 1BFC7340, 0038 (r1 A_M_I_ OEMHPET0 2000705 MSFT 97) Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x508 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:12 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x10de8201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 20000000 (gap: 1c000000:e2c00000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113729 Kernel command line: root=/dev/hdc4 ro mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 1808.232 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 449284k/458496k available (2082k kernel code, 8684k reserved, 709k data, 268k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff80000 - 0xfffff000 ( 508 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB) lowmem : 0xc0000000 - 0xdbfc0000 ( 447 MB) .init : 0xc03bf000 - 0xc0402000 ( 268 kB) .data : 0xc0308a48 - 0xc03b9ea0 ( 709 kB) .text : 0xc0100000 - 0xc0308a48 (2082 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 hpet clockevent registered Calibrating delay using timer specific routine.. 3620.91 BogoMIPS (lpj=6031858) Security Framework initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 9k freed ACPI: Core revision 20070126 ACPI: Checking initramfs for custom DSDT ACPI Error (psloop-0136): Found unknown opcode FD at AML address dc815cf2 offset 570E, ignoring [20070126] ACPI Error (psloop-0136): Found unknown opcode FD at AML address dc815cf2 offset 570E, ignoring [20070126] CPU0: AMD Mobile AMD Sempron&#153; Processor 3400+ stepping 02 Total of 1 processors activated (3620.91 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 1 CPUs net_namespace: 548 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE = 0x20, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:10.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *5 ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *5 ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *11 ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7 ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10 ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5 ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10 ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 © Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default ACPI: RTC can wake from S4 system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved system 00:08: ioport range 0x4d0-0x4d1 has been reserved system 00:08: ioport range 0x800-0x80f has been reserved system 00:08: ioport range 0x500-0x57f has been reserved system 00:08: ioport range 0x580-0x5ff has been reserved system 00:08: ioport range 0x800-0x87f could not be reserved system 00:08: ioport range 0x880-0x8ff has been reserved system 00:08: ioport range 0x900-0x97f has been reserved system 00:08: ioport range 0x980-0x9ff has been reserved system 00:08: ioport range 0x2000-0x207f has been reserved system 00:08: ioport range 0x2080-0x20ff has been reserved system 00:08: iomem range 0x0-0x0 could not be reserved system 00:08: iomem range 0xfee01000-0xfeefffff could not be reserved system 00:08: iomem range 0x1c000000-0x1fffffff has been reserved system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved system 00:0c: iomem range 0x0-0x9ffff could not be reserved system 00:0c: iomem range 0xc0000-0xcffff could not be reserved system 00:0c: iomem range 0xe0000-0xfffff could not be reserved system 00:0c: iomem range 0x100000-0x1bffffff could not be reserved system 00:0c: iomem range 0xe0000000-0xffffffff could not be reserved PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: d000-dfff MEM window: 0xdf600000-0xdf6fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bus 5, cardbus bridge: 0000:04:01.0 IO window: 0x0000e000-0x0000e0ff IO window: 0x0000e400-0x0000e4ff PREFETCH window: 0x20000000-0x23ffffff MEM window: 0x24000000-0x27ffffff PCI: Bridge: 0000:00:10.0 IO window: e000-efff MEM window: 0xdf700000-0xdfffffff PREFETCH window: 0x00000000db000000-0x00000000dcffffff PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:10.0 to 64 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19 ACPI: PCI Interrupt 0000:04:01.0[A] -> Link [LNKB] -> GSI 19 (level, low) -> IRQ 19 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered Unpacking initramfs... done Freeing initrd memory: 691k freed apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:05.0: Boot video device Switched to high resolution mode on CPU 0 pci 0000:00:0b.0: OHCI: BIOS handoff failed (BIOS bug?) 000007b4 PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] PCI: Setting latency timer of device 0000:00:04.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:04.0:pcie00] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Freeing unused kernel memory: 268k freed Uniform Multi-Platform E-IDE driver ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller NFORCE-MCP51: IDE controller (0x10de:0x0265 rev 0xa1) at PCI slot 0000:00:0d.0 NFORCE-MCP51: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:PIO ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:PIO Probing IDE interface ide0... hda: HL-DT-ST DVDRAM GSA-T10N, ATAPI CD/DVD-ROM drive hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected Probing IDE interface ide1... hdc: Hitachi HTS541280H9AT00, ATA DISK drive hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdc: UDMA/100 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:0b.1 to 64 ehci_hcd 0000:00:0b.1: EHCI Host Controller ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0b.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:0b.1 ehci_hcd 0000:00:0b.1: irq 23, io mem 0xdf5dfc00 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 hdc: max request size: 512KiB hdc: 156301488 sectors (80026 MB) w/7528KiB Cache, CHS=16383/255/63 hdc: cache flushes supported hdc:<6>usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected hdc1 hdc2 hdc3 hdc4 ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:0b.0 to 64 ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0b.0: irq 22, io mem 0xdf5de000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected hub 1-0:1.0: unable to enumerate USB device on port 2 ReiserFS: hdc4: found reiserfs format "3.6" with standard journal ReiserFS: hdc4: using ordered data mode ReiserFS: hdc4: journal params: device hdc4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hdc4: checking transaction log (hdc4) usb 1-4: new high speed USB device using ehci_hcd and address 3 ReiserFS: hdc4: Using r5 hash to sort names usb 1-4: configuration #1 chosen from 1 choice usb 2-2: new low speed USB device using ohci_hcd and address 2 usb 2-2: configuration #1 chosen from 1 choice rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k r8169 Gigabit Ethernet driver 2.2LK loaded ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18 ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNEA] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:02:00.0 to 64 r8169 0000:02:00.0: no MSI. Back to INTx. eth0: RTL8168b/8111b at 0xdc8b6000, 00:1a:92:f0:c1:53, XID 38000000 IRQ 18 ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:10.1 to 64 ACPI: AC Adapter [AC0] (on-line) ACPI: Battery Slot [BAT0] (battery present) input: Power Button (FF) as /class/input/input2 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input3 ACPI: Sleep Button (CM) [SLPB] input: Lid Switch as /class/input/input4 ACPI: Lid Switch [LID] input: Power Button (CM) as /class/input/input5 ACPI: Power Button (CM) [PWRB] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: LNXTHERM:01 is registered as thermal_zone0 ACPI: Thermal Zone [TZ00] (50 C) asus-laptop: Asus Laptop Support version 0.42 asus-laptop: Error calling BSTS asus-laptop: A6M model detected Registered led device: asus::mail ACPI: device:24 is registered as cooling_device1 input: Video Bus as /class/input/input6 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) Linux agpgart interface v0.103 nvidia: module license 'NVIDIA' taints kernel. i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700 usbcore: registered new interface driver hiddev input: Logitech Optical USB Mouse as /class/input/input7 input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:0b.0-2 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver SCSI subsystem initialized Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning input: PC Speaker as /class/input/input8 Yenta: CardBus bridge found at 0000:04:01.0 [1043:1367] sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright© Pierre Ossman Yenta: ISA IRQ mask 0x0cb8, PCI irq 19 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#04) from #05 to #08 pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff cs: IO port probe 0xe000-0xefff: clean. pcmcia: parent PCI bridge Memory window: 0xdf700000 - 0xdfffffff pcmcia: parent PCI bridge Memory window: 0xdb000000 - 0xdcffffff ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 17 ACPI: PCI Interrupt 0000:04:01.1[B] -> Link [LNKC] -> GSI 17 (level, low) -> IRQ 17 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[df7ff000-df7ff7ff] Max Packet=[2048] IR/IT contexts=[4/4] sdhci: SDHCI controller found at 0000:04:01.2 [1180:0822] (rev 17) ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 16 ACPI: PCI Interrupt 0000:04:01.2[C] -> Link [LNKD] -> GSI 16 (level, low) -> IRQ 16 sdhc0:slot0: Will use DMA mode even though HW doesn't fully claim to support it. mmc0: SDHCI at 0xdf7ff800 irq 16 DMA Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008 input: SynPS/2 Synaptics TouchPad as /class/input/input9 ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 19 ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNEC] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:05.0 to 64 NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008 Marking TSC unstable due to: TSC halts in idle. cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: clean. cs: IO port probe 0x820-0x8ff: excluding 0x828-0x82f 0x840-0x85f 0x870-0x877 cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800038a6a3b] scsi 0:0:0:0: Direct-Access LG USB Drive 1100 PQ: 0 ANSI: 0 CCS usb-storage: device scan complete Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 1981440 512-byte hardware sectors (1014 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 sd 0:0:0:0: [sda] Assuming drive cache: write through sd 0:0:0:0: [sda] 1981440 512-byte hardware sectors (1014 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 sd 0:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sd 0:0:0:0: [sda] Attached SCSI removable disk sd 0:0:0:0: Attached scsi generic sg0 type 0 ReiserFS: hdc2: found reiserfs format "3.6" with standard journal ReiserFS: hdc2: using ordered data mode ReiserFS: hdc2: journal params: device hdc2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hdc2: checking transaction log (hdc2) ReiserFS: hdc2: Using r5 hash to sort names Adding 498004k swap on /dev/hdc3. Priority:-1 extents:1 across:498004k r8169: eth0: link up r8169: eth0: link up

lspci

Код:

00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) 00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2) 00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2) 00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2) 00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2) 00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) 00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2) 00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2) 00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) 00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) 00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) 00:05.0 VGA compatible controller: nVidia Corporation MCP51 PCI-X GeForce Go 6100 (rev a2) 00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2) 00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3) 00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3) 00:0a.3 Co-processor: nVidia Corporation MCP51 PMU (rev a3) 00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) 00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) 00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1) 00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2) 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 04:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3) 04:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08) 04:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17) 04:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08) 04:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)

xorg.conf

Код:

Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" RgbPath "/usr/share/X11/rgb" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/100dpi:unscaled" FontPath "/usr/share/fonts/75dpi:unscaled" FontPath "/usr/share/fonts/TTF" FontPath "/usr/share/fonts/Type1" EndSection Section "Module" Load "glx" Load "extmod" Load "xtrap" Load "record" Load "dbe" Load "freetype" Load "type1" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbLayout" "us,ru" Option "XkbVariant" ",winkeys" Option "XkbOptions" "grp:caps_toggle,grp_led:scroll" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" Identifier "Card0" Driver "nvidia" VendorName "nVidia Corporation" BoardName "MCP51 PCI-X GeForce Go 6100" Option "NoLogo" "true" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth "24" SubSection "Display" Depth 24 Modes "1280x800" "1024x768" "800x600" EndSubSection EndSection

[gabell]

Было подозрение на драйвер nvidia. С vesa тоже самое. Проблема еще и в том, что комп может нормально работать несколько часов или даже дней, а может зависнут несколько раз подряд в течение получаса. Условия при которых это происходит я так и не определил. В момент зависания вообще может ничего не происходить в системе.

[Gogast]

а superkaramba стоит? посмотри тут: Решено: Зависание иксов

[gabell]

а superkaramba стоит? посмотри тут: Решено: Зависание иксов

Superkaramba не стоит. А на счет CONFIG_FAIR_GROUP_SCHED, у меня вообще нет такого параметра в ядре. Попробую вечерком ядро пересобрать, в Gentoo такого не было.

[sirocco]

Например, здесь
http://wiki.archlinux.org/index.php/NVIDIA
и здесь (в части, относящейся к nvidia)
http://wiki.archlinux.org/index.php/Xorg
пишут

Comment the line
Load "type1"

in the Module section

а так я бы запустил на ночь memtest. А на следующую ночь -- mprime.

[gabell]

Да, что type1 не загружается в логах еще утром увидел, закомментировал. Но опять таки повторюсь, с vesa тоже виснет. memtest на ночь запускался, ошибок не было выявлено. Я в замешательстве

[gabell]

Похоже, что проблема локализована: acpi=off. Но не решена

[sirocco]

Похоже, что проблема локализована: acpi=off. Но не решена

BIOS прошит последний?

[Shade]

А у меня такая фигня случается: виснут не иксы, а клавиатура отваливается в случайные моменты времени. Если перезапустить иксы (мышкой через меню), то опять работает нормально. Машина -- тоже AMD на нвидиевском интегрированном чипсете (6150). Что делать с этим так и не придумал. Может у тебя тоже самое?

[gabell]

Похоже, что проблема локализована: acpi=off. Но не решена

BIOS прошит последний?

Да.

[Factop]

такая же проблема амд+nvidia G0 6100 рандомный залип , как же всетаки устранить

[mishon]

такая же проблема амд+nvidia G0 6100 рандомный залип , как же всетаки устранить

Asus A6M?

[Factop]

не MSI vr330

[gabell]

Решил снова вернуться к acpi. Круг еще больше сузился MODULES=(!thermal !processor).

[angell3]

тоже с такой же проблемой. тока связка nvidia + intel core 2

[gabell]

Здесь подробно о проблеме и способах решения.

[eR]

у меня намертво всё виснет при запуске нативных 3D игр в fullscreen и win игр черз wine в в windowed режиме. (video g965 / driver intel 2.3.2).

[Nark]

У меня видео radeon 9200pro. Если используется драйвер vesa, то иксы грузятся (оконный менеджер twm)
Если драйвер radeon, то иксы виснут уже при загрузке (twm даже не все окошки успевает вывести).
А если гружу KDE, то иксы виснут в любом случае, правда с vesa загрузка проходит почти доконца. Кстати, когда происходит зависание,
то помогает только reset. В логах Xorg'а ошибок не содержится. На этой же машине пробовал Debian и Gentoo. В обоих случаях все работало отменно, и 3D-акселерация была с драйвером radeon. А вот в Arch'е не заводится.

[Nark]

хм...обновил всю систему pacman -Su
теперь на radeon ихсы и кеды запускаются, но работать все равно нельзя: время от времени случается жесткое зависание, например, при запуске glxgears комп виснет где-то на пятой секунде, а так же при попытке сменить тему в fluxbox.

Поправка: видео там не 9200pro, а 9250pro

[LiC]

та же фигня.
HP-530, видюха Intel.
периодически слетают иксы со словами:
мы сломались. попробовали запуститься разов 5 - не смогли. поэтому мы отключены. если что - читай лог.
(точно не помню, но смысл таков)
собственно, лог:

Код:

X.Org X Server 1.4.2 Release Date: 11 June 2008 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.25-ARCH i686 Current Operating System: Linux lic-laptop 2.6.26-ARCH #1 SMP PREEMPT Sun Aug 10 12:29:20 UTC 2008 i686 Build Date: 21 June 2008 05:47:59PM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 11 17:22:24 2008 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Xorg Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Keyboard0" (**) |-->Input Device "USB Mouse" (**) |-->Input Device "Touchpad" (**) Option "AllowMouseOpenFail" "true" (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/PEX" does not exist. Entry deleted from font path. (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic". Entry deleted from font path. (Run 'mkfontdir' on "/usr/share/fonts/cyrillic"). (WW) The directory "/usr/share/fonts/ttf/western" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/truetype" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/defoma/CID" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist. Entry deleted from font path. (==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1. (**) FontPath set to: /usr/share/fonts/misc:unscaled, /usr/share/fonts/misc, /usr/share/fonts/75dpi:unscaled, /usr/share/fonts/75dpi, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/100dpi, /usr/share/fonts/Type1, /usr/share/fonts/misc, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled, /usr/share/fonts/TTF, /usr/share/fonts/Type1 (**) RgbPath set to "/usr/share/X11/rgb" (**) ModulePath set to "/usr/lib/xorg/modules" (II) Open ACPI successful (/var/run/acpid.socket) (II) Loader magic: 0x81e0a60 (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 2.0 X.Org XInput driver : 2.0 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: "pcidata" (II) Loading /usr/lib/xorg/modules//libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 2.0 (++) using VT number 8 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,27ac card 103c,30d5 rev 03 class 06,00,00 hdr 00 (II) PCI: 00:02:0: chip 8086,27ae card 103c,30d5 rev 03 class 03,00,00 hdr 80 (II) PCI: 00:02:1: chip 8086,27a6 card 103c,30d5 rev 03 class 03,80,00 hdr 80 (II) PCI: 00:1b:0: chip 8086,27d8 card 103c,30d5 rev 01 class 04,03,00 hdr 00 (II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 01 class 06,04,00 hdr 81 (II) PCI: 00:1c:1: chip 8086,27d2 card 0000,0000 rev 01 class 06,04,00 hdr 81 (II) PCI: 00:1d:0: chip 8086,27c8 card 103c,30d5 rev 01 class 0c,03,00 hdr 80 (II) PCI: 00:1d:7: chip 8086,27cc card 103c,30d5 rev 01 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev e1 class 06,04,01 hdr 01 (II) PCI: 00:1f:0: chip 8086,27b9 card 103c,30d5 rev 01 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,27df card 103c,30d5 rev 01 class 01,01,8a hdr 00 (II) PCI: 00:1f:2: chip 8086,27c5 card 103c,30d5 rev 01 class 01,06,01 hdr 00 (II) PCI: 02:06:0: chip 1524,1410 card 2400,0000 rev 01 class 06,07,00 hdr 02 (II) PCI: 02:08:0: chip 8086,1068 card 103c,30d5 rev 01 class 02,00,00 hdr 00 (II) PCI: 10:00:0: chip 8086,4222 card 103c,135c rev 02 class 02,80,00 hdr 00 (II) PCI: End of PCI scan (II) Intel Bridge workaround enabled (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,16), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 8: bridge is at (0:28:0), (0,8,8), BCTRL: 0x0004 (VGA_EN is cleared) (II) PCI-to-PCI bridge: (II) Bus 16: bridge is at (0:28:1), (0,16,16), BCTRL: 0x0004 (VGA_EN is cleared) (II) Bus 16 non-prefetchable memory range: [0] -1 0 0xf0000000 - 0xf00fffff (0x100000) MX[B] (II) Subtractive PCI-to-PCI bridge: (II) Bus 2: bridge is at (0:30:0), (0,2,6), BCTRL: 0x0006 (VGA_EN is cleared) (II) Bus 2 I/O range: [0] -1 0 0x00002000 - 0x000020ff (0x100) IX[B] [1] -1 0 0x00002400 - 0x000024ff (0x100) IX[B] [2] -1 0 0x00002800 - 0x000028ff (0x100) IX[B] [3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[B] (II) Bus 2 non-prefetchable memory range: [0] -1 0 0xf0100000 - 0xf03fffff (0x300000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) PCI-to-CardBus bridge: (II) Bus 3: bridge is at (2:6:0), (2,3,6), BCTRL: 0x05c0 (VGA_EN is cleared) (II) Bus 3 I/O range: [0] -1 0 0x00002400 - 0x000024ff (0x100) IX[B] [1] -1 0 0x00002800 - 0x000028ff (0x100) IX[B] (--) PCI:*(0:2:0) Intel Corporation Mobile 945GME Express Integrated Graphics Controller rev 3, Mem @ 0xf0400000/19, 0xe0000000/28, 0xf0480000/18, I/O @ 0x3000/3 (--) PCI: (0:2:1) Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xf0500000/19 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xf0000000 - 0xf0000fff (0x1000) MX[B] [1] -1 0 0xf0101000 - 0xf0101fff (0x1000) MX[B] [2] -1 0 0xf0585000 - 0xf05853ff (0x400) MX[B] [3] -1 0 0xf0584000 - 0xf05843ff (0x400) MX[B] [4] -1 0 0xf0580000 - 0xf0583fff (0x4000) MX[B] [5] -1 0 0xf0500000 - 0xf057ffff (0x80000) MX[B](B) [6] -1 0 0xf0480000 - 0xf04bffff (0x40000) MX[B](B) [7] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B) [8] -1 0 0xf0400000 - 0xf047ffff (0x80000) MX[B](B) [9] -1 0 0x00002000 - 0x0000203f (0x40) IX[B] [10] -1 0 0x00003070 - 0x0000307f (0x10) IX[B] [11] -1 0 0x00001574 - 0x00001577 (0x4) IX[B] [12] -1 0 0x00001370 - 0x00001377 (0x8) IX[B] [13] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[B] [14] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[B] [15] -1 0 0x00003040 - 0x0000304f (0x10) IX[B] [16] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [17] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [18] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [19] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [20] -1 0 0x00003020 - 0x0000303f (0x20) IX[B] [21] -1 0 0x00003000 - 0x00003007 (0x8) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xf0000000 - 0xf0000fff (0x1000) MX[B] [1] -1 0 0xf0101000 - 0xf0101fff (0x1000) MX[B] [2] -1 0 0xf0585000 - 0xf05853ff (0x400) MX[B] [3] -1 0 0xf0584000 - 0xf05843ff (0x400) MX[B] [4] -1 0 0xf0580000 - 0xf0583fff (0x4000) MX[B] [5] -1 0 0xf0500000 - 0xf057ffff (0x80000) MX[B](B) [6] -1 0 0xf0480000 - 0xf04bffff (0x40000) MX[B](B) [7] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B) [8] -1 0 0xf0400000 - 0xf047ffff (0x80000) MX[B](B) [9] -1 0 0x00002000 - 0x0000203f (0x40) IX[B] [10] -1 0 0x00003070 - 0x0000307f (0x10) IX[B] [11] -1 0 0x00001574 - 0x00001577 (0x4) IX[B] [12] -1 0 0x00001370 - 0x00001377 (0x8) IX[B] [13] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[B] [14] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[B] [15] -1 0 0x00003040 - 0x0000304f (0x10) IX[B] [16] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [17] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [18] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [19] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [20] -1 0 0x00003020 - 0x0000303f (0x20) IX[B] [21] -1 0 0x00003000 - 0x00003007 (0x8) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf0000000 - 0xf0000fff (0x1000) MX[B] [5] -1 0 0xf0101000 - 0xf0101fff (0x1000) MX[B] [6] -1 0 0xf0585000 - 0xf05853ff (0x400) MX[B] [7] -1 0 0xf0584000 - 0xf05843ff (0x400) MX[B] [8] -1 0 0xf0580000 - 0xf0583fff (0x4000) MX[B] [9] -1 0 0xf0500000 - 0xf057ffff (0x80000) MX[B](B) [10] -1 0 0xf0480000 - 0xf04bffff (0x40000) MX[B](B) [11] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B) [12] -1 0 0xf0400000 - 0xf047ffff (0x80000) MX[B](B) [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0 0x00002000 - 0x0000203f (0x40) IX[B] [16] -1 0 0x00003070 - 0x0000307f (0x10) IX[B] [17] -1 0 0x00001574 - 0x00001577 (0x4) IX[B] [18] -1 0 0x00001370 - 0x00001377 (0x8) IX[B] [19] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[B] [20] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[B] [21] -1 0 0x00003040 - 0x0000304f (0x10) IX[B] [22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [26] -1 0 0x00003020 - 0x0000303f (0x20) IX[B] [27] -1 0 0x00003000 - 0x00003007 (0x8) IX[B](B) (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "freetype" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded. This was enabled by default and also specified in the config file. (II) "dri" will be loaded. This was enabled by default and also specified in the config file. (II) LoadModule: "ddc"(II) Module "ddc" already built-in (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading extension XFree86-DRI (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "type1" (WW) Warning, couldn't open module type1 (II) UnloadModule: "type1" (EE) Failed to load module "type1" (module does not exist, 0) (II) LoadModule: "freetype" (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 1.4.2, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font FreeType (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension RECORD (II) LoadModule: "synaptics" (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so (II) Module synaptics: vendor="X.Org Foundation" compiled for 4.3.99.902, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0 (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.4.2, module version = 2.3.2 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 2.0 (II) LoadModule: "kbd" (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.3.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0 (II) LoadModule: "mouse" (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.3.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0 (II) LoadModule: "synaptics" (II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device (II) Primary Device is: PCI 00:02:0 (--) Assigning device section with no busID to primary device (WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found (--) Chipset 945GME found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf0000000 - 0xf0000fff (0x1000) MX[B] [5] -1 0 0xf0101000 - 0xf0101fff (0x1000) MX[B] [6] -1 0 0xf0585000 - 0xf05853ff (0x400) MX[B] [7] -1 0 0xf0584000 - 0xf05843ff (0x400) MX[B] [8] -1 0 0xf0580000 - 0xf0583fff (0x4000) MX[B] [9] -1 0 0xf0500000 - 0xf057ffff (0x80000) MX[B](B) [10] -1 0 0xf0480000 - 0xf04bffff (0x40000) MX[B](B) [11] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B) [12] -1 0 0xf0400000 - 0xf047ffff (0x80000) MX[B](B) [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0 0x00002000 - 0x0000203f (0x40) IX[B] [16] -1 0 0x00003070 - 0x0000307f (0x10) IX[B] [17] -1 0 0x00001574 - 0x00001577 (0x4) IX[B] [18] -1 0 0x00001370 - 0x00001377 (0x8) IX[B] [19] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[B] [20] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[B] [21] -1 0 0x00003040 - 0x0000304f (0x10) IX[B] [22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [26] -1 0 0x00003020 - 0x0000303f (0x20) IX[B] [27] -1 0 0x00003000 - 0x00003007 (0x8) IX[B](B) (II) resource ranges after probing: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf0000000 - 0xf0000fff (0x1000) MX[B] [5] -1 0 0xf0101000 - 0xf0101fff (0x1000) MX[B] [6] -1 0 0xf0585000 - 0xf05853ff (0x400) MX[B] [7] -1 0 0xf0584000 - 0xf05843ff (0x400) MX[B] [8] -1 0 0xf0580000 - 0xf0583fff (0x4000) MX[B] [9] -1 0 0xf0500000 - 0xf057ffff (0x80000) MX[B](B) [10] -1 0 0xf0480000 - 0xf04bffff (0x40000) MX[B](B) [11] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B) [12] -1 0 0xf0400000 - 0xf047ffff (0x80000) MX[B](B) [13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [18] -1 0 0x00002000 - 0x0000203f (0x40) IX[B] [19] -1 0 0x00003070 - 0x0000307f (0x10) IX[B] [20] -1 0 0x00001574 - 0x00001577 (0x4) IX[B] [21] -1 0 0x00001370 - 0x00001377 (0x8) IX[B] [22] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[B] [23] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[B] [24] -1 0 0x00003040 - 0x0000304f (0x10) IX[B] [25] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [29] -1 0 0x00003020 - 0x0000303f (0x20) IX[B] [30] -1 0 0x00003000 - 0x00003007 (0x8) IX[B](B) [31] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [32] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/lib/xorg/modules//libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 2.0 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules//libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.1.0 ABI class: X.Org Video Driver, version 2.0 (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.4.2, module version = 0.1.0 ABI class: X.Org Video Driver, version 2.0 (**) intel(0): Depth 16, (--) framebuffer bpp 16 (==) intel(0): RGB weight 565 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel® 945GME (--) intel(0): Chipset: "945GME" (--) intel(0): Linear framebuffer at 0xE0000000 (--) intel(0): IO registers at addr 0xF0400000 (II) intel(0): 2 display pipes available. (==) intel(0): Using EXA for acceleration (II) Loading sub module "ddc" (II) LoadModule: "ddc"(II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c"(II) Module "i2c" already built-in (II) intel(0): Output VGA using monitor section Monitor0 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): Output LVDS has no monitor section (II) intel(0): I2C bus "LVDSDDC_C" initialized. (II) intel(0): Attempting to determine panel fixed mode. (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): EDID vendor "CMO", prod id 5414 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/lib/xorg/modules//libint10.so (II) intel(0): initializing int10 (WW) intel(0): Bad V_BIOS checksum (II) intel(0): Primary V_BIOS segment is: 0xc000 (II) intel(0): VESA BIOS detected (II) intel(0): VESA VBE Version 3.0 (II) intel(0): VESA VBE Total Mem: 7872 kB (II) intel(0): VESA VBE OEM: Intel® 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS (II) intel(0): VESA VBE OEM Software Rev: 1.0 (II) intel(0): VESA VBE OEM Vendor: Intel Corporation (II) intel(0): VESA VBE OEM Product: Intel® 82945GM Chipset Family Graphics Controller (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70. (II) intel(0): No SDVO device found on SDVOB (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72. (II) intel(0): No SDVO device found on SDVOC (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed. (II) intel(0): Output TV has no monitor section (II) intel(0): EDID vendor "CMO", prod id 5414 (II) intel(0): Output VGA disconnected (II) intel(0): Output LVDS connected (II) intel(0): Output TV disconnected (II) intel(0): Output LVDS using initial mode 1280x800 (II) intel(0): Monitoring connected displays enabled (II) intel(0): detected 256 kB GTT. (II) intel(0): detected 7932 kB stolen memory. (==) intel(0): video overlay key set to 0x83e (==) intel(0): Will not try to enable page flipping (==) intel(0): Triple buffering disabled (==) intel(0): Intel XvMC decoder disabled (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (==) intel(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.3 (II) Loading sub module "exa" (II) LoadModule: "exa" (II) Loading /usr/lib/xorg/modules//libexa.so (II) Module exa: vendor="X.Org Foundation" compiled for 1.4.2, module version = 2.2.0 ABI class: X.Org Video Driver, version 2.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac"(II) Module "ramdac" already built-in (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a (WW) intel(0): PP_STATUS before: on, ready, sequencing idle (WW) intel(0): PP_STATUS after: on, ready, sequencing on (WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00020000 to 0x00020203 (WW) intel(0): PIPEASTAT before: status: VBLANK_INT_ENABLE (WW) intel(0): PIPEASTAT after: status: VBLANK_INT_ENABLE VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS (WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00020202 to 0x80020202 (WW) intel(0): PIPEBSTAT before: status: VBLANK_INT_ENABLE VSYNC_INT_STATUS VBLANK_INT_STATUS (WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VBLANK_INT_ENABLE VSYNC_INT_STATUS VBLANK_INT_STATUS (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xf0480000 - 0xf04bffff (0x40000) MS[B] [1] 0 0 0xe0000000 - 0xefffffff (0x10000000) MS[B] [2] 0 0 0xf0400000 - 0xf047ffff (0x80000) MS[B] [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [7] -1 0 0xf0000000 - 0xf0000fff (0x1000) MX[B] [8] -1 0 0xf0101000 - 0xf0101fff (0x1000) MX[B] [9] -1 0 0xf0585000 - 0xf05853ff (0x400) MX[B] [10] -1 0 0xf0584000 - 0xf05843ff (0x400) MX[B] [11] -1 0 0xf0580000 - 0xf0583fff (0x4000) MX[B] [12] -1 0 0xf0500000 - 0xf057ffff (0x80000) MX[B](B) [13] -1 0 0xf0480000 - 0xf04bffff (0x40000) MX[B](B) [14] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B) [15] -1 0 0xf0400000 - 0xf047ffff (0x80000) MX[B](B) [16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [19] 0 0 0x00003000 - 0x00003007 (0x8) IS[B] [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [22] -1 0 0x00002000 - 0x0000203f (0x40) IX[B] [23] -1 0 0x00003070 - 0x0000307f (0x10) IX[B] [24] -1 0 0x00001574 - 0x00001577 (0x4) IX[B] [25] -1 0 0x00001370 - 0x00001377 (0x8) IX[B] [26] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[B] [27] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[B] [28] -1 0 0x00003040 - 0x0000304f (0x10) IX[B] [29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [31] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [32] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [33] -1 0 0x00003020 - 0x0000303f (0x20) IX[B] [34] -1 0 0x00003000 - 0x00003007 (0x8) IX[B](B) [35] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [36] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): Kernel reported 238848 total, 1 used (II) intel(0): I830CheckAvailableMemory: 955388 kB available drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: drmOpenMinor returns 9 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) [drm] DRM interface version 1.3 (II) [drm] DRM open master succeeded. (II) intel(0): [drm] Using the DRM lock SAREA also for drawables. (II) intel(0): [drm] framebuffer mapped by ddx driver (II) intel(0): [drm] added 1 reserved context for kernel (II) intel(0): X context handle = 0x1 (II) intel(0): [drm] installed DRM signal handler (**) intel(0): Framebuffer compression enabled (**) intel(0): Tiling enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): [drm] Registers = 0xf0400000 (II) intel(0): [drm] ring buffer = 0xe0000000 (II) intel(0): [drm] mapped front buffer at 0xe0800000, handle = 0xe0800000 (II) intel(0): [drm] mapped back buffer at 0xe2000000, handle = 0xe2000000 (II) intel(0): [drm] mapped depth buffer at 0xe2800000, handle = 0xe2800000 (II) intel(0): [drm] mapped classic textures at 0xe3000000, handle = 0xe3000000 (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432 (II) intel(0): [dri] visual configs initialized (II) intel(0): Page Flipping disabled (==) intel(0): Write-combining range (0xe0000000,0x10000000) (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) EXA(0): Offscreen pixmap area of 15728640 bytes (II) EXA(0): Driver registered support for the following operations: (II) Solid (II) Copy (II) Composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): [DRI] installation complete (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00800000 (pgoffset 2048) (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x01000000 (pgoffset 4096) (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x02000000 (pgoffset 8192) (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02800000 (pgoffset 10240) (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x03000000 (pgoffset 12288) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) (II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000003f820000 physical ) (II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000003fe20000 physical ) (II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000003fe21000 physical ) (II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB) (II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000003fe33000 physical ) (II) intel(0): 0x007bf000: end of stolen memory (II) intel(0): 0x00800000-0x00ffffff: front buffer (5120 kB) X tiled (II) intel(0): 0x01000000-0x01efffff: exa offscreen (15360 kB) (II) intel(0): 0x02000000-0x027fffff: back buffer (5120 kB) X tiled (II) intel(0): 0x02800000-0x02ffffff: depth buffer (5120 kB) X tiled (II) intel(0): 0x03000000-0x04ffffff: classic textures (32768 kB) (II) intel(0): 0x10000000: end of aperture (WW) intel(0): PRB0_HEAD (0x8b411e0c) and PRB0_TAIL (0x00000000) indicate ring buffer not flushed (WW) intel(0): Existing errors found in hardware state. (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is off (II) intel(0): Display plane A is now disabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe none (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output TV is connected to pipe none (II) intel(0): [drm] dma control initialized, using IRQ 16 (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (II) intel(0): Selecting standard 18 bit TMDS pixel format. (**) Option "dpms" "true" (**) intel(0): DPMS enabled (II) intel(0): Set up textured video (II) intel(0): Set up overlay video (II) intel(0): direct rendering: Enabled (--) RandR disabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension XAccessControlExtension (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: drmOpenMinor returns 10 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (WW) AIGLX: 3D driver claims to not support visual 0x23 (WW) AIGLX: 3D driver claims to not support visual 0x24 (WW) AIGLX: 3D driver claims to not support visual 0x25 (WW) AIGLX: 3D driver claims to not support visual 0x26 (WW) AIGLX: 3D driver claims to not support visual 0x27 (WW) AIGLX: 3D driver claims to not support visual 0x28 (WW) AIGLX: 3D driver claims to not support visual 0x29 (WW) AIGLX: 3D driver claims to not support visual 0x2a (WW) AIGLX: 3D driver claims to not support visual 0x2b (WW) AIGLX: 3D driver claims to not support visual 0x2c (WW) AIGLX: 3D driver claims to not support visual 0x2d (WW) AIGLX: 3D driver claims to not support visual 0x2e (WW) AIGLX: 3D driver claims to not support visual 0x2f (WW) AIGLX: 3D driver claims to not support visual 0x30 (WW) AIGLX: 3D driver claims to not support visual 0x31 (WW) AIGLX: 3D driver claims to not support visual 0x32 (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (II) intel(0): Setting screen physical size to 331 x 207 (**) Option "CoreKeyboard" (**) Keyboard0: always reports core events (**) Option "Protocol" "standard" (**) Keyboard0: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Keyboard0: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) Keyboard0: XkbModel: "pc105" (**) Option "XkbLayout" "us,ru,ua" (**) Keyboard0: XkbLayout: "us,ru,ua" (**) Option "XkbVariant" ",winkeys,winkeys" (**) Keyboard0: XkbVariant: ",winkeys,winkeys" (**) Option "CustomKeycodes" "off" (**) Keyboard0: CustomKeycodes disabled (**) Option "Protocol" "IMPS/2" (**) USB Mouse: Device: "/dev/input/mice" (**) USB Mouse: Protocol: "IMPS/2" (**) Option "SendCoreEvents" "true" (**) Option "CorePointer" (**) USB Mouse: always reports core events (**) Option "Device" "/dev/input/mice" (**) Option "Buttons" "5" (==) USB Mouse: Emulate3Buttons, Emulate3Timeout: 50 (**) Option "ZAxisMapping" "4 5" (**) USB Mouse: ZAxisMapping: buttons 4 and 5 (**) USB Mouse: Buttons: 9 (**) USB Mouse: Sensitivity: 1 (II) Synaptics touchpad driver version 0.14.6 (1406) (--) Touchpad auto-dev sets device to /dev/input/event8 (**) Option "Device" "/dev/input/event8" (**) Option "SHMConfig" "on" (**) Option "LeftEdge" "1700" (**) Option "RightEdge" "5300" (**) Option "TopEdge" "1700" (**) Option "BottomEdge" "4200" (**) Option "VertScrollDelta" "100" (**) Option "FingerLow" "25" (**) Option "FingerHigh" "30" (**) Option "MaxTapTime" "180" (**) Option "MaxTapMove" "220" (--) Touchpad touchpad found (**) Option "SendCoreEvents" (**) Touchpad: always reports core events (II) evaluating device (Touchpad) (II) XINPUT: Adding extended input device "Touchpad" (type: MOUSE) (II) evaluating device (USB Mouse) (II) XINPUT: Adding extended input device "USB Mouse" (type: MOUSE) (II) evaluating device (Keyboard0) (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) (--) Touchpad auto-dev sets device to /dev/input/event8 (**) Option "Device" "/dev/input/event8" (--) Touchpad touchpad found (II) USB Mouse: ps2EnableDataReporting: succeeded Error in I830WaitLpRing(), timeout for 2 seconds pgetbl_ctl: 0x3ffc0001 getbl_err: 0x00000000 ipeir: 0x00000000 iphdr: 0x7d000006 LP ring tail: 0x00011df0 head: 0x00011e0c len: 0x0001f001 start 0x00000000 eir: 0x0000 esr: 0x0000 emr: 0xffff instdone: 0xfa41 instpm: 0x0000 memmode: 0x00000306 instps: 0x800f04c4 hwstam: 0xfffe ier: 0x0002 imr: 0x0000 iir: 0x0050 Ring at virtual 0xa7af4000 head 0x11e0c tail 0x11df0 count 32761 00011d8c: 01000000 00011d90: 54c00006 00011d94: 01cc1000 00011d98: 001c0098 00011d9c: 0020009c 00011da0: 00800000 00011da4: 00000000 00011da8: 00000010 00011dac: 01000000 00011db0: 54c00006 00011db4: 01cc1000 00011db8: 001c009c 00011dbc: 002000a0 00011dc0: 00800000 00011dc4: 00000000 00011dc8: 00000010 00011dcc: 01000000 00011dd0: 54c00006 00011dd4: 01cc1000 00011dd8: 001c00a0 00011ddc: 002000a4 00011de0: 00800000 00011de4: 00000000 00011de8: 00000010 00011dec: 01000000 00011df0: ffff0000 00011df4: ffff0013 00011df8: ffff2fe0 00011dfc: ffff0000 00011e00: ffff0050 00011e04: ffff2f90 00011e08: ffff0006 00011e0c: ffff0003 Ring end space: 20 wanted 32 (II) intel(0): [drm] removed 1 reserved context for kernel (II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xf8bde000 at 0xb7c26000 (II) intel(0): [drm] Closed DRM master. Fatal server error: lockup (II) AIGLX: Suspending AIGLX clients for VT switch (II) intel(0): xf86UnbindGARTMemory: unbind key 0 (II) intel(0): xf86UnbindGARTMemory: unbind key 1 (II) intel(0): xf86UnbindGARTMemory: unbind key 2 (II) intel(0): xf86UnbindGARTMemory: unbind key 3 (II) intel(0): xf86UnbindGARTMemory: unbind key 4

а вот - конфиг иксов:

Код:

Section "ServerLayout" Identifier "Xorg Configured" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" # PS/2 Mouse not detected # Serial Mouse not detected InputDevice "USB Mouse" "CorePointer" InputDevice "Touchpad" "SendCoreEvents" EndSection Section "ServerFlags" Option "AllowMouseOpenFail" "true" EndSection Section "Files" RgbPath "/usr/share/X11/rgb" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/misc:unscaled" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/75dpi:unscaled" FontPath "/usr/share/fonts/75dpi" FontPath "/usr/share/fonts/100dpi:unscaled" FontPath "/usr/share/fonts/100dpi" FontPath "/usr/share/fonts/PEX" # Additional fonts: Locale, Gimp, TTF... FontPath "/usr/share/fonts/cyrillic" # FontPath "/usr/share/lib/X11/fonts/latin2/75dpi" # FontPath "/usr/share/lib/X11/fonts/latin2/100dpi" # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig! FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/ttf/western" FontPath "/usr/share/fonts/ttf/decoratives" FontPath "/usr/share/fonts/truetype" FontPath "/usr/share/fonts/truetype/openoffice" FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera" FontPath "/usr/share/fonts/latex-ttf-fonts" FontPath "/usr/share/fonts/defoma/CID" FontPath "/usr/share/fonts/defoma/TrueType" EndSection Section "Module" Load "ddc" # ddc probing of monitor Load "dbe" Load "dri" Load "extmod" Load "glx" Load "bitmap" # bitmap-fonts Load "type1" Load "freetype" Load "record" Load "synaptics" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "us,ru,ua" Option "XkbVariant" ",winkeys,winkeys" EndSection Section "InputDevice" Identifier "Serial Mouse" Driver "mouse" Option "Protocol" "Microsoft" Option "Device" "/dev/ttyS0" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "PS/2 Mouse" Driver "mouse" Option "Protocol" "auto" Option "ZAxisMapping" "4 5" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "USB Mouse" Driver "mouse" Option "Device" "/dev/input/mice" Option "SendCoreEvents" "true" Option "Protocol" "IMPS/2" Option "ZAxisMapping" "4 5" Option "Buttons" "5" EndSection Section "InputDevice" Identifier "Touchpad" Driver "synaptics" Option "Device" "/dev/input/mouse0" Option "Protocol" "auto-dev" Option "LeftEdge" "1700" Option "RightEdge" "5300" Option "TopEdge" "1700" Option "BottomEdge" "4200" Option "FingerLow" "25" Option "FingerHigh" "30" Option "MaxTapTime" "180" Option "MaxTapMove" "220" Option "VertScrollDelta" "100" Option "MinSpeed" "0.06" Option "MaxSpeed" "0.12" Option "AccelFactor" "0.0010" Option "SHMConfig" "on" EndSection # Auto-generated by Archie mkxcfg Section "Monitor" Identifier "Monitor0" Option "DPMS" "true" # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors VertRefresh 50.0 - 75.0 # Very conservative. May flicker. # VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default. # 1280x800 @ 60.00 Hz (GTF) hsync: 49.68 kHz; pclk: 83.46 MHz Modeline "1280x800_60.00" 83.46 1280 1344 1480 1680 800 801 804 828 -HSync +Vsync # Default modes distilled from # "VESA and Industry Standards and Guide for Computer Display Monitor # Timing", version 1.0, revision 0.8, adopted September 17, 1998. # $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $ # 640x350 @ 85Hz (VESA) hsync: 37.9kHz ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync # 640x400 @ 85Hz (VESA) hsync: 37.9kHz ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync # 720x400 @ 85Hz (VESA) hsync: 37.9kHz ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync # 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync # 640x480 @ 72Hz (VESA) hsync: 37.9kHz ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync # 640x480 @ 75Hz (VESA) hsync: 37.5kHz ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync # 640x480 @ 85Hz (VESA) hsync: 43.3kHz ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync # 800x600 @ 56Hz (VESA) hsync: 35.2kHz ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync # 800x600 @ 60Hz (VESA) hsync: 37.9kHz ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync # 800x600 @ 72Hz (VESA) hsync: 48.1kHz ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync # 800x600 @ 75Hz (VESA) hsync: 46.9kHz ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync # 800x600 @ 85Hz (VESA) hsync: 53.7kHz ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync # 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace # 1024x768 @ 60Hz (VESA) hsync: 48.4kHz ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync # 1024x768 @ 70Hz (VESA) hsync: 56.5kHz ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync # 1024x768 @ 75Hz (VESA) hsync: 60.0kHz ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync # 1024x768 @ 85Hz (VESA) hsync: 68.7kHz ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync # 1152x864 @ 75Hz (VESA) hsync: 67.5kHz ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync # 1280x960 @ 60Hz (VESA) hsync: 60.0kHz ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync # 1280x960 @ 85Hz (VESA) hsync: 85.9kHz ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync # 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync # 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync # 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync # 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync # 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync # 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync # 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync # 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync # 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync # 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync # 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync # 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync # 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync # 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync # Additional modelines ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync # Extended modelines with GTF timings # 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync # 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync # 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync # 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync # 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync # 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync # 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync # 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync # 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync # 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync # 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync # 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync # 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync # 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync # 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync # 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync # 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync # 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync # 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync # 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync # 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync EndSection # Auto-generated by Archie mkxcfg Section "Device" Identifier "Card0" Driver "Intel" VendorName "All" BoardName "All" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1280x800" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1280x800" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1280x800" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1280x800" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1280x800" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1280x800" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 32 Modes "1280x800" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Mode 0666 EndSection

вся беда в том, что, как было уже сказано, можно поймать несколько глюков за полчаса, а можно и несколько дней проработать.
попробую тоже acpi=off .... посмотрим....
но это действительно не решение.
до этого пользовался длительное время Opensuse 10.3 - ничего подобного не случалось

[mmlic]

Искал очень долго решение этой проблемы... не знал уже на что грешить... ядро пересобирал раз 10 разных версий... дрова переставлял и с реп и с офф сайта.. ни че не помогало... пришлось даже несколько раз переходить назад на убунту (с ней перешел на arch)...
Потом как оказалось проблема было в acpi...
добавил в menu.lst опцию acpi=off и зависания прекратились... но эт тоже не выход... дико неудобно без него.. особенно на ноуте (как у меня)
Потом нашел на буржуйском форуме решение, нужно добавить след опции к ядру в menu.lst:

title Arch Linux 2.6.26.5-ARCH (my)
root (hd0,1)
kernel /boot/vmlinuz26-my root=/dev/disk/by-uuid/7ca53aa4-0a1e-4d53-910f-006e4eaf200d ro highres=off nohz=off irqpoll
initrd /boot/kernel26-my.img

Живу уже 2 дня без намека на зависания!
p.s. notebook msi m670 | nvidia 6100 | sempron 3500+ )