как заставить блютус работать?

[kind_shubin]

вот вывод lspci

Код: Выделить всё

00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
07:05.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
07:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
07:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
07:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
07:07.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)

в виннде само собой все работает. в биосе он нигде не включается. как заставить работать? дальнейшее назначение жпрс.

[Ben Aceler]

вот вывод lspci

Насколько я понял из этого вывода, у вас Bluetooth не на pci, а на usb. Приведите вывод lsusb.

[kind_shubin]

вот вывод lspci

Насколько я понял из этого вывода, у вас Bluetooth не на pci, а на usb. Приведите вывод lsusb.

пожалуйста.
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 002: ID 0458:003a KYE Systems Corp. (Mouse Systems)
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
теперь что делать? вроде и тута нету... лампочка блютуса неактивна. в винде когда блютус в системе виден горит лампочка. как быть?

[Ben Aceler]

Так, у вас ноутбук на 915-м чипсете, там один из мостов PCI может быть за другим мостом PCI - у меня такая штука была с PCMCIA картой. Лечится это добавлением опции "pci=assign-busses" к строке запуска ядра. Представляете, где это?

Проблема описана тут: http://lkml.org/lkml/2006/2/16/240

[kind_shubin]

Так, у вас ноутбук на 915-м чипсете, там один из мостов PCI может быть за другим мостом PCI - у меня такая штука была с PCMCIA картой. Лечится это добавлением опции "pci=assign-busses" к строке запуска ядра. Представляете, где это?

Проблема описана тут: http://lkml.org/lkml/2006/2/16/240

спасибо за ответ. честно с линуксами новичок. если подскажите буду благодарен. линк обязательно прочту.

[eduard_pustobaev]

спасибо за ответ. честно с линуксами новичок. если подскажите буду благодарен. линк обязательно прочту.

/boot/grub/menu.lst

[kind_shubin]

спасибо за ответ. честно с линуксами новичок. если подскажите буду благодарен. линк обязательно прочту.

/boot/grub/menu.lst

Почитал содержимое файла, добавил такую строчку kopt_pci=assign_buses..... не помогло...

[Ben Aceler]

Почитал содержимое файла, добавил такую строчку kopt_pci=assign_buses..... не помогло...

Какой нафиг, kopt_pci? pci! Показывайте, куда добавляли, а то сейчас такого надобавляете...

[kind_shubin]

Почитал содержимое файла, добавил такую строчку kopt_pci=assign_buses..... не помогло...

Какой нафиг, kopt_pci? pci! Показывайте, куда добавляли, а то сейчас такого надобавляете...

почитал указагнный файл. там есть такой кусок
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
ну и далее по смыслу дописал... а как надо было?

[bluesman]

У мнея похожая проблема, только чипсет 945-ый, мне можно то же самое доавить в загрузку ядра?

[Ben Aceler]

а как надо было?

Вы приведите листинг menu.lst, ту часть, которая не закомментирована, я вам скажу куда добавить. Прямо сейчас я в альте, тут другой загрузчик.

[kind_shubin]

а как надо было?

Вы приведите листинг menu.lst, ту часть, которая не закомментирована, я вам скажу куда добавить. Прямо сейчас я в альте, тут другой загрузчик.

Код: Выделить всё

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default        0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout        10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title        Windows 95/98/NT/2000
# root        (hd0,0)
# makeactive
# chainloader    +1
#
# title        Linux
# root        (hd0,1)
# kernel    /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=25dee921-7e9d-463e-ad6a-450a5600710b ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,5)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title        Ubuntu 8.04, kernel 2.6.24-16-generic
root        (hd0,5)
kernel        /boot/vmlinuz-2.6.24-16-generic root=UUID=25dee921-7e9d-463e-ad6a-450a5600710b ro quiet splash
initrd        /boot/initrd.img-2.6.24-16-generic
quiet

title        Ubuntu 8.04, kernel 2.6.24-16-generic (recovery mode)
root        (hd0,5)
kernel        /boot/vmlinuz-2.6.24-16-generic root=UUID=25dee921-7e9d-463e-ad6a-450a5600710b ro single
initrd        /boot/initrd.img-2.6.24-16-generic

title        Ubuntu 8.04, memtest86+
root        (hd0,5)
kernel        /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title        Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title        Microsoft Windows XP Professional RU
root        (hd0,1)
savedefault
makeactive
chainloader    +1

заранее благодарен!

[ADonecky]

а dmesg можно посмотреть??? и какой ноутбук??? подробнее товарищ))

[kind_shubin]

а dmesg можно посмотреть??? и какой ноутбук??? подробнее товарищ))

конечно можно! %)

Код:

[ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1995.282 MHz processor. [ 6.485687] Console: colour VGA+ 80x25 [ 6.485692] console [tty0] enabled [ 6.486011] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 6.486792] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 6.614187] Memory: 2057540k/2087744k available (2157k kernel code, 28948k reserved, 998k data, 364k init, 1170240k highmem) [ 6.614197] virtual kernel memory layout: [ 6.614198] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 6.614199] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 6.614200] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 6.614201] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 6.614202] .init : 0xc041b000 - 0xc0476000 ( 364 kB) [ 6.614203] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB) [ 6.614204] .text : 0xc0100000 - 0xc031b5a4 (2157 kB) [ 6.614208] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 6.614251] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 6.694243] Calibrating delay using timer specific routine.. 3994.69 BogoMIPS (lpj=7989390) [ 6.694280] Security Framework initialized [ 6.694290] SELinux: Disabled at boot. [ 6.694309] AppArmor: AppArmor initialized [ 6.694314] Failure registering capabilities with primary security module. [ 6.694323] Mount-cache hash table entries: 512 [ 6.694496] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000 [ 6.694511] CPU: L1 I cache: 32K, L1 D cache: 32K [ 6.694515] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 00000000 [ 6.694524] Compat vDSO mapped to ffffe000. [ 6.694539] Checking 'hlt' instruction... OK. [ 6.710612] SMP alternatives: switching to UP code [ 6.712461] Freeing SMP alternatives: 11k freed [ 6.712594] Early unpacking initramfs... done [ 7.159158] ACPI: Core revision 20070126 [ 7.159262] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 7.163423] CPU0: Intel® Pentium® M processor 2.00GHz stepping 08 [ 7.163450] Total of 1 processors activated (3994.69 BogoMIPS). [ 7.164858] ENABLING IO-APIC IRQs [ 7.165068] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 7.310104] Brought up 1 CPUs [ 7.310151] CPU0 attaching sched-domain: [ 7.310155] domain 0: span 01 [ 7.310157] groups: 01 [ 7.310512] net_namespace: 64 bytes [ 7.310523] Booting paravirtualized kernel on bare hardware [ 7.311178] Time: 23:25:49 Date: 06/13/08 [ 7.311231] NET: Registered protocol family 16 [ 7.311920] EISA bus registered [ 7.311960] ACPI: bus type pci registered [ 7.312655] PCI: PCI BIOS revision 2.10 entry at 0xfd70e, last bus=8 [ 7.312659] PCI: Using configuration type 1 [ 7.312660] Setting up standard PCI resources [ 7.323030] ACPI: EC: Look up EC in DSDT [ 7.324936] ACPI: Interpreter enabled [ 7.324944] ACPI: (supports S0 S3 S4 S5) [ 7.324963] ACPI: Using IOAPIC for interrupt routing [ 7.325616] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 7.337782] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 7.337787] ACPI: EC: driver started in interrupt mode [ 7.337933] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 7.338819] Force enabled HPET at base address 0xfed00000 [ 7.338827] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 7.338832] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 7.340010] PCI: Transparent bridge - 0000:00:1e.0 [ 7.340210] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 7.340577] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 7.340723] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 7.340871] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 7.351136] ACPI: PCI Interrupt Link [LNKA] (IRQs *10 11) [ 7.351290] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11) [ 7.351438] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11) [ 7.351584] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11) [ 7.351747] ACPI: PCI Interrupt Link [LNKE] (IRQs *10 11) [ 7.351893] ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11) [ 7.352054] ACPI: PCI Interrupt Link [LNKG] (IRQs *10 11) [ 7.352201] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11) [ 7.352549] Linux Plug and Play Support v0.97 © Adam Belay [ 7.352658] pnp: PnP ACPI init [ 7.352674] ACPI: bus type pnp registered [ 7.356786] pnp: PnP ACPI: found 9 devices [ 7.356792] ACPI: ACPI bus type pnp unregistered [ 7.356796] PnPBIOS: Disabled by ACPI PNP [ 7.357577] PCI: Using ACPI for IRQ routing [ 7.357585] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 7.357591] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0 [ 7.357594] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1 [ 7.357598] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2 [ 7.357600] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2 [ 7.394001] NET: Registered protocol family 8 [ 7.394005] NET: Registered protocol family 20 [ 7.394231] hpet clockevent registered [ 7.394241] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 7.394245] hpet0: 3 64-bit timers, 14318180 Hz [ 7.395303] AppArmor: AppArmor Filesystem Enabled [ 7.397982] Time: tsc clocksource has been installed. [ 7.406114] system 00:04: ioport range 0x680-0x68f has been reserved [ 7.406119] system 00:04: ioport range 0x800-0x80f has been reserved [ 7.406121] system 00:04: ioport range 0x1000-0x107f has been reserved [ 7.406124] system 00:04: ioport range 0x1180-0x11bf has been reserved [ 7.406127] system 00:04: ioport range 0x1200-0x1200 has been reserved [ 7.406129] system 00:04: ioport range 0x1204-0x1204 has been reserved [ 7.406136] system 00:04: iomem range 0xe0000000-0xefffffff could not be reserved [ 7.406139] system 00:04: iomem range 0xf0000000-0xf0003fff could not be reserved [ 7.406142] system 00:04: iomem range 0xf0004000-0xf0004fff could not be reserved [ 7.406144] system 00:04: iomem range 0xf0005000-0xf0005fff could not be reserved [ 7.406147] system 00:04: iomem range 0xf0008000-0xf000bfff could not be reserved [ 7.406150] system 00:04: iomem range 0xfec18000-0xfec180ff has been reserved [ 7.406153] system 00:04: iomem range 0xfed20000-0xfed8ffff could not be reserved [ 7.437474] PCI: Bridge: 0000:00:1c.0 [ 7.437481] IO window: 3000-3fff [ 7.437486] MEM window: disabled. [ 7.437490] PREFETCH window: disabled. [ 7.437496] PCI: Bridge: 0000:00:1c.1 [ 7.437497] IO window: disabled. [ 7.437502] MEM window: b4000000-b7ffffff [ 7.437506] PREFETCH window: d0000000-d3ffffff [ 7.437512] PCI: Bridge: 0000:00:1c.2 [ 7.437514] IO window: 6000-6fff [ 7.437519] MEM window: disabled. [ 7.437523] PREFETCH window: disabled. [ 7.437545] PCI: Bus 8, cardbus bridge: 0000:07:06.0 [ 7.437547] IO window: 00001400-000014ff [ 7.437553] IO window: 00002800-000028ff [ 7.437558] PREFETCH window: 8c000000-8fffffff [ 7.437563] MEM window: 90000000-93ffffff [ 7.437567] PCI: Bridge: 0000:00:1e.0 [ 7.437568] IO window: disabled. [ 7.437574] MEM window: b8000000-b80fffff [ 7.437578] PREFETCH window: disabled. [ 7.437619] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 7.437626] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 7.437648] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17 [ 7.437654] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 7.437676] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 7.437681] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 7.437694] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 7.437712] ACPI: PCI Interrupt 0000:07:06.0[A] -> GSI 22 (level, low) -> IRQ 19 [ 7.437732] NET: Registered protocol family 2 [ 7.474048] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 7.474344] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 7.475613] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 7.476250] TCP: Hash tables configured (established 131072 bind 65536) [ 7.476253] TCP reno registered [ 7.486105] checking if image is initramfs... it is [ 7.897804] Switched to high resolution mode on CPU 0 [ 8.309950] Freeing initrd memory: 7698k freed [ 8.310185] Simple Boot Flag at 0x37 set to 0x1 [ 8.311445] audit: initializing netlink socket (disabled) [ 8.311463] audit(1213399549.592:1): initialized [ 8.311718] highmem bounce pool size: 64 pages [ 8.316435] VFS: Disk quotas dquot_6.5.1 [ 8.316616] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 8.316906] io scheduler noop registered [ 8.316913] io scheduler anticipatory registered [ 8.316915] io scheduler deadline registered [ 8.316944] io scheduler cfq registered (default) [ 8.316960] Boot video device is 0000:00:02.0 [ 8.317306] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 8.317359] assign_interrupt_mode Found MSI capability [ 8.317406] Allocate Port Service[0000:00:1c.0:pcie00] [ 8.317521] Allocate Port Service[0000:00:1c.0:pcie02] [ 8.317738] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 8.317791] assign_interrupt_mode Found MSI capability [ 8.317835] Allocate Port Service[0000:00:1c.1:pcie00] [ 8.317945] Allocate Port Service[0000:00:1c.1:pcie02] [ 8.318129] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 8.318182] assign_interrupt_mode Found MSI capability [ 8.318226] Allocate Port Service[0000:00:1c.2:pcie00] [ 8.318335] Allocate Port Service[0000:00:1c.2:pcie02] [ 8.319064] isapnp: Scanning for PnP cards... [ 8.673060] isapnp: No Plug & Play device found [ 8.823538] Real Time Clock Driver v1.12ac [ 8.823786] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 8.825659] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 21 (level, low) -> IRQ 20 [ 8.825671] ACPI: PCI interrupt for device 0000:00:1e.3 disabled [ 8.827513] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 8.827667] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 8.827933] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 8.830431] i8042.c: Detected active multiplexing controller, rev 1.1. [ 8.831801] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 8.831808] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 8.831810] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 8.831812] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 8.831814] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 8.837615] mice: PS/2 mouse device common for all mice [ 8.838010] EISA: Probing bus 0 at eisa.0 [ 8.838020] Cannot allocate resource for EISA slot 1 [ 8.838023] Cannot allocate resource for EISA slot 2 [ 8.838025] Cannot allocate resource for EISA slot 3 [ 8.838036] Cannot allocate resource for EISA slot 6 [ 8.838045] EISA: Detected 0 cards. [ 8.838049] cpuidle: using governor ladder [ 8.838051] cpuidle: using governor menu [ 8.838163] NET: Registered protocol family 1 [ 8.838202] Using IPI No-Shortcut mode [ 8.838249] registered taskstats version 1 [ 8.838406] Magic number: 12:790:453 [ 8.838569] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 8.838572] EDD information not available. [ 8.838825] Freeing unused kernel memory: 364k freed [ 8.850555] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 10.220591] fuse init (API version 7.9) [ 10.265225] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 10.265236] ACPI: Processor [CPU0] (supports 8 throttling states) [ 10.265279] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 10.270844] ACPI: Thermal Zone [TZS0] (77 C) [ 10.272060] ACPI: Thermal Zone [TZS1] (58 C) [ 11.264267] usbcore: registered new interface driver usbfs [ 11.264304] usbcore: registered new interface driver hub [ 11.276228] usbcore: registered new device driver usb [ 11.292080] USB Universal Host Controller Interface driver v3.0 [ 11.292196] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21 [ 11.292213] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 11.292218] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 11.292631] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 11.292672] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001820 [ 11.292861] usb usb1: configuration #1 chosen from 1 choice [ 11.292902] hub 1-0:1.0: USB hub found [ 11.292913] hub 1-0:1.0: 2 ports detected [ 11.396261] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 16 [ 11.396277] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 11.396282] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 11.396325] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 11.396360] uhci_hcd 0000:00:1d.1: irq 16, io base 0x00001840 [ 11.396525] usb usb2: configuration #1 chosen from 1 choice [ 11.396565] hub 2-0:1.0: USB hub found [ 11.396576] hub 2-0:1.0: 2 ports detected [ 11.500239] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 11.500254] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 11.500259] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 11.500300] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 11.500336] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 [ 11.500500] usb usb3: configuration #1 chosen from 1 choice [ 11.500543] hub 3-0:1.0: USB hub found [ 11.500554] hub 3-0:1.0: 2 ports detected [ 11.532532] SCSI subsystem initialized [ 11.604175] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 22 [ 11.604191] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 11.604195] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 11.604238] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 11.604275] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00001880 [ 11.604431] usb usb4: configuration #1 chosen from 1 choice [ 11.604471] hub 4-0:1.0: USB hub found [ 11.604482] hub 4-0:1.0: 2 ports detected [ 11.640021] libata version 3.00 loaded. [ 11.708302] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21 [ 11.708323] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 11.708327] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 11.708381] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 11.712304] ehci_hcd 0000:00:1d.7: debug port 1 [ 11.712311] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 11.712320] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xb0040000 [ 11.748005] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 11.759996] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 11.760157] usb usb5: configuration #1 chosen from 1 choice [ 11.760199] hub 5-0:1.0: USB hub found [ 11.760210] hub 5-0:1.0: 8 ports detected [ 11.864189] tg3.c:v3.86 (November 9, 2007) [ 11.864227] ACPI: PCI Interrupt 0000:07:07.0[A] -> GSI 20 (level, low) -> IRQ 23 [ 11.960118] eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:0a:e4:e9:98:de [ 11.960127] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] [ 11.960129] eth0: dma_rwctrl[763f0000] dma_mask[32-bit] [ 11.960189] ACPI: PCI Interrupt 0000:07:06.2[A] -> GSI 22 (level, low) -> IRQ 19 [ 12.010011] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[b8018000-b80187ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 12.024366] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 17 [ 12.024414] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 12.024431] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 12.034801] ata_piix 0000:00:1f.1: version 2.12 [ 12.034823] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 17 [ 12.034871] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 12.037214] scsi0 : ata_piix [ 12.038544] scsi1 : ata_piix [ 12.039113] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 12.039118] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 12.202318] ata1.00: ATA-6: ST9100825A, 3.04, max UDMA/100 [ 12.202324] ata1.00: 195371568 sectors, multi 16: LBA48 [ 12.217085] ata1.00: configured for UDMA/100 [ 12.217142] ata2: port disabled. ignoring. [ 12.217325] scsi 0:0:0:0: Direct-Access ATA ST9100825A 3.04 PQ: 0 ANSI: 5 [ 12.247776] usb 5-3: new high speed USB device using ehci_hcd and address 2 [ 12.382202] usb 5-3: configuration #1 chosen from 1 choice [ 12.793668] Driver 'sd' needs updating - please use bus_type methods [ 12.793804] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 12.793844] sd 0:0:0:0: [sda] Write Protect is off [ 12.793848] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 12.793902] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 12.794007] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 12.794045] sd 0:0:0:0: [sda] Write Protect is off [ 12.794049] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 12.794102] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 12.794110] sda:<6>usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 12.817722] sda1 sda2 sda3 < sda5 sda6 sda7 > [ 12.819934] sd 0:0:0:0: [sda] Attached SCSI disk [ 12.832668] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 12.891425] Clocksource tsc unstable (delta = -239407682 ns) [ 12.895409] Time: hpet clocksource has been installed. [ 12.915850] usb 3-1: configuration #1 chosen from 1 choice [ 12.923766] usbcore: registered new interface driver libusual [ 12.944729] Initializing USB Mass Storage driver... [ 12.954258] scsi2 : SCSI emulation for USB Mass Storage devices [ 12.955465] usbcore: registered new interface driver usb-storage [ 12.955472] USB Mass Storage support registered. [ 12.955479] usb-storage: device found at 2 [ 12.955481] usb-storage: waiting for device to settle before scanning [ 12.966026] usbcore: registered new interface driver hiddev [ 12.974237] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input2 [ 12.975334] input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:1d.2-1 [ 12.975360] usbcore: registered new interface driver usbhid [ 12.975364] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 13.056630] ieee1394: Node added: ID:BUS[0-00:1023] GUID[0010100305075460] [ 13.057719] ieee1394: Host added: ID:BUS[0-01:1023] GUID[000ae405426012ab] [ 13.080462] Attempting manual resume [ 13.080468] swsusp: Resume From Partition 8:7 [ 13.080469] PM: Checking swsusp image. [ 13.086716] PM: Resume from disk failed. [ 13.089327] scsi3 : SBP-2 IEEE-1394 [ 13.129330] kjournald starting. Commit interval 5 seconds [ 13.129351] EXT3-fs: mounted filesystem with ordered data mode. [ 13.276472] ieee1394: sbp2: Logged into SBP-2 device [ 13.276555] ieee1394: sbp2: Node 0-00:1023: Max speed [S400] - Max payload [2048] [ 13.276896] scsi 3:0:0:0: CD-ROM Slimtype DVDRW SOSW-833S VRS3 PQ: 0 ANSI: 0 [ 13.277003] scsi 3:0:0:0: Attached scsi generic sg1 type 5 [ 13.760570] usb-storage: device scan complete [ 13.761000] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2 [ 13.762352] sd 2:0:0:0: [sdb] 3928064 512-byte hardware sectors (2011 MB) [ 13.762701] sd 2:0:0:0: [sdb] Write Protect is off [ 13.762706] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 13.762709] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 13.764504] sd 2:0:0:0: [sdb] 3928064 512-byte hardware sectors (2011 MB) [ 13.764850] sd 2:0:0:0: [sdb] Write Protect is off [ 13.764856] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 13.764858] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 13.764866] sdb: sdb1 [ 13.765744] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 13.765799] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 16.200736] Linux agpgart interface v0.102 [ 16.264820] agpgart: Detected an Intel 915GM Chipset. [ 16.264885] agpgart: Detected 7932K stolen memory. [ 16.382747] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 16.444705] agpgart: AGP aperture is 256M @ 0xc0000000 [ 16.445387] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.652707] input: Power Button (FF) as /devices/virtual/input/input3 [ 16.668492] ACPI: Power Button (FF) [PWRF] [ 16.668655] input: Lid Switch as /devices/virtual/input/input4 [ 16.669661] ACPI: Lid Switch [LID0] [ 16.669826] input: Sleep Button (CM) as /devices/virtual/input/input5 [ 16.688459] ACPI: Sleep Button (CM) [SLPB] [ 16.749771] ACPI: WMI-Acer: Mapper loaded [ 17.245061] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 17.256187] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 18.372994] ACPI: Battery Slot [BAT0] (battery present) [ 18.373516] ACPI: AC Adapter [ADP1] (on-line) [ 18.715451] iTCO_vendor_support: vendor-support=0 [ 18.751993] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 18.752225] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060) [ 18.752334] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 18.957830] intel_rng: FWH not detected [ 19.474979] ieee80211_crypt: registered algorithm 'NULL' [ 19.507973] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 19.507978] ieee80211: Copyright © 2004-2005 Intel Corporation <jketreno@linux.intel.com> [ 19.758031] ipw2200: Intel® PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 19.758036] ipw2200: Copyright© 2003-2006 Intel Corporation [ 19.766579] ACPI: PCI Interrupt 0000:07:05.0[A] -> GSI 20 (level, low) -> IRQ 23 [ 19.808017] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 20.164425] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 20.442589] Driver 'sr' needs updating - please use bus_type methods [ 20.474534] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 20.474541] Uniform CD-ROM driver Revision: 3.20 [ 20.474682] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 20.786384] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x204000 [ 20.825293] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8 [ 21.004148] irda_init() [ 21.004174] NET: Registered protocol family 23 [ 21.037604] acer_acpi: Acer Laptop ACPI Extras version 0.11.1 [ 21.037613] acer_acpi: Detected Acer AMW0 version 2 interface [ 21.039868] Registered led device: acer_acpi:mail [ 21.073351] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8; irq 3; dma 3. [ 21.073383] nsc-ircc, chip->init [ 21.073395] nsc-ircc, Found chip at base=0x02e [ 21.073400] nsc-ircc, Wrong chip version ff [ 21.073439] nsc-ircc, Found chip at base=0x02e [ 21.073444] nsc-ircc, Wrong chip version ff [ 21.073587] nsc-ircc 00:06: disabled [ 23.552173] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) [ 23.552231] Yenta: CardBus bridge found at 0000:07:06.0 [1025:0097] [ 23.552254] Yenta: Using CSCINT to route CSC interrupts to PCI [ 23.552256] Yenta: Routing CardBus interrupts to PCI [ 23.552262] Yenta TI: socket 0000:07:06.0, mfunc 0x01001002, devctl 0x64 [ 23.637302] Yenta: ISA IRQ mask 0x0cf8, PCI irq 19 [ 23.637307] Socket status: 30000006 [ 23.637310] Yenta: Raising subordinate bus# of parent bus (#07) from #08 to #0b [ 23.637316] pcmcia: parent PCI bridge Memory window: 0xb8000000 - 0xb80fffff [ 23.638239] ACPI: PCI Interrupt 0000:07:06.3[A] -> GSI 22 (level, low) -> IRQ 19 [ 23.638404] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 21 (level, low) -> IRQ 20 [ 23.638438] PCI: Setting latency timer of device 0000:00:1e.2 to 64 [ 23.702072] NET: Registered protocol family 10 [ 23.702379] lo: Disabled Privacy Extensions [ 23.702763] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.779749] cs: IO port probe 0x100-0x3af: clean. [ 23.781546] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 23.782415] cs: IO port probe 0x820-0x8ff: clean. [ 23.783070] cs: IO port probe 0xc00-0xcf7: clean. [ 23.784052] cs: IO port probe 0xa00-0xaff: clean. [ 23.812090] intel8x0_measure_ac97_clock: measured 55392 usecs [ 23.812095] intel8x0: clocking to 48000 [ 24.007989] lp: driver loaded but no devices found [ 24.220510] Adding 1196800k swap on /dev/sda7. Priority:-1 extents:1 across:1196800k [ 24.344157] EXT3 FS on sda6, internal journal [ 24.968668] ip_tables: © 2000-2006 Netfilter Core Team [ 25.168376] PPP generic driver version 2.4.2 [ 25.980926] ACPI: ACPI Dock Station Driver [ 27.089435] apm: BIOS not found. [ 27.164790] ppdev: user-space parallel port driver [ 27.195187] audit(1213385180.341:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5053 profile="/usr/sbin/cupsd" namespace="default" [ 41.070038] Marking TSC unstable due to: cpufreq changes. [ 53.220753] Bluetooth: Core ver 2.11 [ 53.227018] NET: Registered protocol family 31 [ 53.227027] Bluetooth: HCI device and connection manager initialized [ 53.227033] Bluetooth: HCI socket layer initialized [ 28.510988] Bluetooth: L2CAP ver 2.9 [ 28.510994] Bluetooth: L2CAP socket layer initialized [ 35.646334] Bluetooth: RFCOMM socket layer initialized [ 35.647051] Bluetooth: RFCOMM TTY layer initialized [ 35.647061] Bluetooth: RFCOMM ver 1.8 [ 30.148372] [drm] Initialized drm 1.1.0 20060810 [ 30.156617] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 30.156629] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 30.158181] [drm] Initialized i915 1.6.0 20060119 on minor 0

Ноутбук Acer Travelmate 3304. os - ubuntu 8.04

[kind_shubin]

проблемма актуально. подскажите ответ..

[blackdevil]

Попробуйте в консоли дать команду sudo apt-get install bluez-utils && /etc/init.d/bluez-utils start и посмотрите загорелась ли лампочка блютуза...

[kind_shubin]

Попробуйте в консоли дать команду sudo apt-get install bluez-utils && /etc/init.d/bluez-utils start и посмотрите загорелась ли лампочка блютуза...

не загорелася.... выдало вот что...

Код: Выделить всё

 ivan@laptop:~$ sudo apt-get install bluez-utils && /etc/init.d/bluez-utils start
bash: /etc/init.d/bluez-utils: No such file or directory

сначала правда сказала что олновила 0 пакетов ибо не надо... а далее ерор...

люди, подскажите плиз куда именно вписывать строчку в меню.лст

[кодировщик]

Сделайте отдельно
sudo apt-get install bluez-utils
sudo /etc/init.d/bluez-utils restart

[kind_shubin]

Сделайте отдельно
sudo apt-get install bluez-utils
sudo /etc/init.d/bluez-utils restart

делал... не помогло...

[*Sasha*]

pci=assign-busses к строке запуска ядра

Так и не добавили

Представляете, где это?

kernel /boot/vmlinuz-2.6.24-16-generic root=UUID=25dee921-7e9d-463e-ad6a-450a5600710b ro quiet splash

[ADonecky]

так, у меня на буке от тошиба RFCOMM 1.8 поднялся установкой omnibook.Смотрим тут, ставим, отписываемся.
ЗЫ а пакеты можно поставить и из adept_manager